.oobfree = { {2, 38} }
};
-/* This is used for padding purposes in nand_write_oob */
-static u_char ffchars[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+static struct nand_oobinfo nand_oob_128 = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 48,
+ .eccpos = {
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ .oobfree = { {2, 78} }
};
+/* This is used for padding purposes in nand_write_oob */
+static u_char *ffchars;
+
/*
* NAND low-level MTD interface functions
*/
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
+ if (ffchars) {
+ kfree(ffchars);
+ ffchars = NULL;
+ }
}
#endif
u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
{
int i, status;
- u_char ecc_code[32];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
uint *oob_config = oobsel->eccpos;
int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
struct nand_chip *this = mtd->priv;
u_char *data_poi, *oob_data = oob_buf;
- u_char ecc_calc[32];
- u_char ecc_code[32];
+ u_char ecc_calc[NAND_MAX_OOBSIZE];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode, eccsteps;
unsigned *oob_config;
int datidx;
if (NAND_MUST_PAD(this)) {
/* Write out desired data */
this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+ if (!ffchars) {
+ if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "No memory for padding array, need %d bytes", mtd->oobsize);
+ ret = -ENOMEM;
+ goto out;
+ }
+ memset(ffchars, 0xff, mtd->oobsize);
+ }
/* prepad 0xff for partial programming */
this->write_buf(mtd, ffchars, column);
/* write data */
case 64:
this->autooob = &nand_oob_64;
break;
+ case 128:
+ this->autooob = &nand_oob_128;
+ break;
default:
printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
mtd->oobsize);