--- /dev/null
+/*
+ * Belkin F5D825 V1 board support
+ *
+ * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+
+#include "devices.h"
+
+#include <linux/rtl8366.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#define F5D8235_GPIO_RTL8366_SCK 2
+#define F5D8235_GPIO_RTL8366_SDA 1
+
+#define F5D8235_GPIO_LED_USB_BLUE 7
+#define F5D8235_GPIO_LED_USB_ORANGE 8
+#define F5D8235_GPIO_BUTTON_WPS 0
+#define F5D8235_GPIO_BUTTON_RESET 9
+
+#define F5D8235_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition f5d8235_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel and rootfs",
+ .offset = 0x050000,
+ .size = 0x790000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1D0000,
+ .size = 0x610000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7E0000,
+ .size = 0x010000,
+ }, {
+ .name = "factory",
+ .offset = 0x7F0000,
+ .size = 0x010000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data f5d8235_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(f5d8235_partitions),
+ .parts = f5d8235_partitions,
+#endif
+};
+
+static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
+ .gpio_sda = F5D8235_GPIO_RTL8366_SDA,
+ .gpio_sck = F5D8235_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device f5d8235_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &f5d8235_rtl8366s_data,
+ }
+};
+
+static struct gpio_led f5d8235_leds_gpio[] __initdata = {
+ {
+ .name = "f5d8234-v1:blue:storage",
+ .gpio = F5D8235_GPIO_LED_USB_BLUE,
+ .active_low = 1,
+ },{
+ .name = "f5d8234-v1:orange:storage",
+ .gpio = F5D8235_GPIO_LED_USB_ORANGE,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button f5d8235_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = F5D8235_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = F5D8235_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init f5d8235_init(void)
+{
+ rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
+
+ rt288x_register_flash(0, &f5d8235_flash_data);
+ rt288x_register_wifi();
+ rt288x_register_wdt();
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
+ f5d8235_leds_gpio);
+
+ ramips_register_gpio_buttons(-1, F5D8235_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(f5d8235_gpio_buttons),
+ f5d8235_gpio_buttons);
+
+ platform_device_register(&f5d8235_rtl8366s_device);
+
+ rt288x_eth_data.speed = SPEED_1000;
+ rt288x_eth_data.duplex = DUPLEX_FULL;
+ rt288x_eth_data.tx_fc = 1;
+ rt288x_eth_data.rx_fc = 1;
+ rt288x_register_ethernet();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
+ "Belkin F5D8235 v1", f5d8235_init);
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
endef
+define Image/Build/Template/F5D8235V1
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
endef
-
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
endef
endif
+define Image/Build/Profile/F5D8235V1
+ $(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
+endef
define Image/Build/Profile/RTN15
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
projects / openwrt / staging / xback.git / commitdiff