}
#endif
-#endif /* ! __ASSEMBLY__ */
-
-#if defined(__ASSEMBLY__)
-/*
- * For a snooping icache, we still need a dummy icbi to purge all the
- * prefetched instructions from the ifetch buffers. We also need a sync
- * before the icbi to order the the actual stores to memory that might
- * have modified instructions with the icbi.
- */
-#define PURGE_PREFETCHED_INS \
- sync; \
- icbi 0,r3; \
- sync; \
- isync
-#else
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#ifdef CONFIG_PPC_BOOK3S_32
{
__asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory");
}
+
+static inline void icbi(void *addr)
+{
+ asm volatile ("icbi 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void iccci(void *addr)
+{
+ asm volatile ("iccci 0, %0" : : "r"(addr) : "memory");
+}
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHE_H */
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-extern void flush_icache_range(unsigned long, unsigned long);
+void flush_icache_range(unsigned long start, unsigned long stop);
extern void flush_icache_user_range(struct vm_area_struct *vma,
struct page *page, unsigned long addr,
int len);
-extern void __flush_dcache_icache(void *page_va);
extern void flush_dcache_icache_page(struct page *page);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
-extern void __flush_dcache_icache_phys(unsigned long physaddr);
-#else
-static inline void __flush_dcache_icache_phys(unsigned long physaddr)
-{
- BUG();
-}
-#endif
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
+void __flush_dcache_icache(void *page);
+
+/**
+ * flush_dcache_range(): Write any modified data cache blocks out to memory and
+ * invalidate them. Does not invalidate the corresponding instruction cache
+ * blocks.
+ *
+ * @start: the start address
+ * @stop: the stop address (exclusive)
*/
static inline void flush_dcache_range(unsigned long start, unsigned long stop)
{
EXPORT_SYMBOL(flush_instruction_cache)
#endif /* CONFIG_PPC_8xx */
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
-#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200)
- PURGE_PREFETCHED_INS
- blr /* for 601 and e200, do nothing */
-#else
- rlwinm r3,r3,0,0,31 - L1_CACHE_SHIFT
- subf r4,r3,r4
- addi r4,r4,L1_CACHE_BYTES - 1
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
-#ifndef CONFIG_44x
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
-#else
- /* Flash invalidate on 44x because we are passed kmapped addresses and
- this doesn't work for userspace pages due to the virtually tagged
- icache. Sigh. */
- iccci 0, r0
-#endif
- sync /* additional sync needed on g4 */
- isync
- blr
-#endif
-_ASM_NOKPROBE_SYMBOL(flush_icache_range)
-EXPORT_SYMBOL(flush_icache_range)
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 and e200 which have a unified cache.
- *
- * void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200)
- PURGE_PREFETCHED_INS
- blr
-#else
- rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
- li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,L1_CACHE_BYTES
- bdnz 0b
- sync
-#ifdef CONFIG_44x
- /* We don't flush the icache on 44x. Those have a virtual icache
- * and we don't have access to the virtual address here (it's
- * not the page vaddr but where it's mapped in user space). The
- * flushing of the icache on these is handled elsewhere, when
- * a change in the address space occurs, before returning to
- * user space
- */
-BEGIN_MMU_FTR_SECTION
- blr
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
-#endif /* CONFIG_44x */
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 1b
- sync
- isync
- blr
-#endif
-
-#ifndef CONFIG_BOOKE
-/*
- * Flush a particular page from the data cache to RAM, identified
- * by its physical address. We turn off the MMU so we can just use
- * the physical address (this may be a highmem page without a kernel
- * mapping).
- *
- * void __flush_dcache_icache_phys(unsigned long physaddr)
- */
-_GLOBAL(__flush_dcache_icache_phys)
-#if defined(CONFIG_PPC_BOOK3S_601) || defined(CONFIG_E200)
- PURGE_PREFETCHED_INS
- blr /* for 601 and e200, do nothing */
-#else
- mfmsr r10
- rlwinm r0,r10,0,28,26 /* clear DR */
- mtmsr r0
- isync
- rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
- li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,L1_CACHE_BYTES
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 1b
- sync
- mtmsr r10 /* restore DR */
- isync
- blr
-#endif
-#endif /* CONFIG_BOOKE */
-
/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
mtlr r0
blr
- .section ".toc","aw"
-PPC64_CACHES:
- .tc ppc64_caches[TC],ppc64_caches
- .section ".text"
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- *
- * flush all bytes from start through stop-1 inclusive
- */
-
-_GLOBAL_TOC(flush_icache_range)
-BEGIN_FTR_SECTION
- PURGE_PREFETCHED_INS
- blr
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-/*
- * Flush the data cache to memory
- *
- * Different systems have different cache line sizes
- * and in some cases i-cache and d-cache line sizes differ from
- * each other.
- */
- ld r10,PPC64_CACHES@toc(r2)
- lwz r7,DCACHEL1BLOCKSIZE(r10)/* Get cache block size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5 /* ensure we get enough */
- lwz r9,DCACHEL1LOGBLOCKSIZE(r10) /* Get log-2 of cache block size */
- srd. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mtctr r8
-1: dcbst 0,r6
- add r6,r6,r7
- bdnz 1b
- sync
-
-/* Now invalidate the instruction cache */
-
- lwz r7,ICACHEL1BLOCKSIZE(r10) /* Get Icache block size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5
- lwz r9,ICACHEL1LOGBLOCKSIZE(r10) /* Get log-2 of Icache block size */
- srd. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mtctr r8
-2: icbi 0,r6
- add r6,r6,r7
- bdnz 2b
- isync
- blr
-_ASM_NOKPROBE_SYMBOL(flush_icache_range)
-EXPORT_SYMBOL(flush_icache_range)
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-/*
- * Flush the data cache to memory
- *
- * Different systems have different cache line sizes
- */
-
-BEGIN_FTR_SECTION
- PURGE_PREFETCHED_INS
- blr
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-
-/* Flush the dcache */
- ld r7,PPC64_CACHES@toc(r2)
- clrrdi r3,r3,PAGE_SHIFT /* Page align */
- lwz r4,DCACHEL1BLOCKSPERPAGE(r7) /* Get # dcache blocks per page */
- lwz r5,DCACHEL1BLOCKSIZE(r7) /* Get dcache block size */
- mr r6,r3
- mtctr r4
-0: dcbst 0,r6
- add r6,r6,r5
- bdnz 0b
- sync
-
-/* Now invalidate the icache */
-
- lwz r4,ICACHEL1BLOCKSPERPAGE(r7) /* Get # icache blocks per page */
- lwz r5,ICACHEL1BLOCKSIZE(r7) /* Get icache block size */
- mtctr r4
-1: icbi 0,r3
- add r3,r3,r5
- bdnz 1b
- isync
- blr
-
_GLOBAL(__bswapdi2)
EXPORT_SYMBOL(__bswapdi2)
srdi r8,r3,32
free_initmem_default(POISON_FREE_INITMEM);
}
+/**
+ * flush_coherent_icache() - if a CPU has a coherent icache, flush it
+ * @addr: The base address to use (can be any valid address, the whole cache will be flushed)
+ * Return true if the cache was flushed, false otherwise
+ */
+static inline bool flush_coherent_icache(unsigned long addr)
+{
+ /*
+ * For a snooping icache, we still need a dummy icbi to purge all the
+ * prefetched instructions from the ifetch buffers. We also need a sync
+ * before the icbi to order the the actual stores to memory that might
+ * have modified instructions with the icbi.
+ */
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) {
+ mb(); /* sync */
+ icbi((void *)addr);
+ mb(); /* sync */
+ isync();
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * invalidate_icache_range() - Flush the icache by issuing icbi across an address range
+ * @start: the start address
+ * @stop: the stop address (exclusive)
+ */
+static void invalidate_icache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long shift = l1_icache_shift();
+ unsigned long bytes = l1_icache_bytes();
+ char *addr = (char *)(start & ~(bytes - 1));
+ unsigned long size = stop - (unsigned long)addr + (bytes - 1);
+ unsigned long i;
+
+ for (i = 0; i < size >> shift; i++, addr += bytes)
+ icbi(addr);
+
+ mb(); /* sync */
+ isync();
+}
+
+/**
+ * flush_icache_range: Write any modified data cache blocks out to memory
+ * and invalidate the corresponding blocks in the instruction cache
+ *
+ * Generic code will call this after writing memory, before executing from it.
+ *
+ * @start: the start address
+ * @stop: the stop address (exclusive)
+ */
+void flush_icache_range(unsigned long start, unsigned long stop)
+{
+ if (flush_coherent_icache(start))
+ return;
+
+ clean_dcache_range(start, stop);
+
+ if (IS_ENABLED(CONFIG_44x)) {
+ /*
+ * Flash invalidate on 44x because we are passed kmapped
+ * addresses and this doesn't work for userspace pages due to
+ * the virtually tagged icache.
+ */
+ iccci((void *)start);
+ mb(); /* sync */
+ isync();
+ } else
+ invalidate_icache_range(start, stop);
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+#if !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64)
+/**
+ * flush_dcache_icache_phys() - Flush a page by it's physical address
+ * @physaddr: the physical address of the page
+ */
+static void flush_dcache_icache_phys(unsigned long physaddr)
+{
+ unsigned long bytes = l1_dcache_bytes();
+ unsigned long nb = PAGE_SIZE / bytes;
+ unsigned long addr = physaddr & PAGE_MASK;
+ unsigned long msr, msr0;
+ unsigned long loop1 = addr, loop2 = addr;
+
+ msr0 = mfmsr();
+ msr = msr0 & ~MSR_DR;
+ /*
+ * This must remain as ASM to prevent potential memory accesses
+ * while the data MMU is disabled
+ */
+ asm volatile(
+ " mtctr %2;\n"
+ " mtmsr %3;\n"
+ " isync;\n"
+ "0: dcbst 0, %0;\n"
+ " addi %0, %0, %4;\n"
+ " bdnz 0b;\n"
+ " sync;\n"
+ " mtctr %2;\n"
+ "1: icbi 0, %1;\n"
+ " addi %1, %1, %4;\n"
+ " bdnz 1b;\n"
+ " sync;\n"
+ " mtmsr %5;\n"
+ " isync;\n"
+ : "+&r" (loop1), "+&r" (loop2)
+ : "r" (nb), "r" (msr), "i" (bytes), "r" (msr0)
+ : "ctr", "memory");
+}
+#endif // !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64)
+
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
__flush_dcache_icache(start);
kunmap_atomic(start);
} else {
- __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
+ unsigned long addr = page_to_pfn(page) << PAGE_SHIFT;
+
+ if (flush_coherent_icache(addr))
+ return;
+ flush_dcache_icache_phys(addr);
}
#endif
}
EXPORT_SYMBOL(flush_dcache_icache_page);
+/**
+ * __flush_dcache_icache(): Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ *
+ * @page: the address of the page to flush
+ */
+void __flush_dcache_icache(void *p)
+{
+ unsigned long addr = (unsigned long)p;
+
+ if (flush_coherent_icache(addr))
+ return;
+
+ clean_dcache_range(addr, addr + PAGE_SIZE);
+
+ /*
+ * We don't flush the icache on 44x. Those have a virtual icache and we
+ * don't have access to the virtual address here (it's not the page
+ * vaddr but where it's mapped in user space). The flushing of the
+ * icache on these is handled elsewhere, when a change in the address
+ * space occurs, before returning to user space.
+ */
+
+ if (cpu_has_feature(MMU_FTR_TYPE_44x))
+ return;
+
+ invalidate_icache_range(addr, addr + PAGE_SIZE);
+}
+
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
clear_page(page);
projects / openwrt / staging / blogic.git / commitdiff