ramips: add support for TOTOLINK X5000R

Specifications:
- SoC: MT7621AT
- RAM: 256MB
- Flash: 16MB (EN25QH128A)
- Ethernet: 5xGbE
- WiFi: MT7915 2x2 2.4G 573.5Mbps + 2x2 5G 1201Mbps

Known issue:
MT7915 DBDC variant isn't supported yet.

Flash instruction:
Upload the sysupgrade firmware to the firmware upgrade page in
vendor fw.

Other info:
MT7915 seems to have two PCIEs connected to MT7621. Card detected on
PCIE0 has an ID of 14c3:7916 and the other one on PCIE1 has 14c3:7915.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

diff --git a/target/linux/ramips/dts/mt7621_totolink_x5000r.dts b/target/linux/ramips/dts/mt7621_totolink_x5000r.dts
new file mode 100644 (file)
index 0000000..b05d839
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_totolink_x5000r.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "totolink,x5000r", "mediatek,mt7621-soc";
+       model = "TOTOLINK X5000R";
+
+       aliases {
+               led-boot = &led_sys;
+               led-failsafe = &led_sys;
+               led-running = &led_sys;
+               led-upgrade = &led_sys;
+               label-mac-device = &gmac0;
+               serial0 = &uartlite;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_sys: sys {
+                       label = "blue:sys";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+       };
+};
+
+&gmac0 {
+       mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0xe006>;
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "wdt";
+               function = "gpio";
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 274d9f7158f4d3461a81bfe4c0f45db19c978142..7a97f8aa73d154ae37666e420e315a955ed61759 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1015,6 +1015,16 @@ define Device/totolink_a7000r
 endef
 TARGET_DEVICES += totolink_a7000r
 
+define Device/totolink_x5000r
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 16064k
+  UIMAGE_NAME := C8343R-9999
+  DEVICE_VENDOR := TOTOLINK
+  DEVICE_MODEL := X5000R
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += totolink_x5000r
+
 define Device/tplink_re350-v1
   $(Device/dsa-migration)
   $(Device/tplink-safeloader)