ath79: TP-Link EAP225-Outdoor v1: convert ath10k to nvmem-cells

Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.

Use mac-address-increment to ensure the MAC address is set correctly,
and remove the device from the caldata extraction and patching script.

Signed-off-by: Sander Vanheule <sander@svanheule.net>

diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
index fc6d3365a071e33ab952a74fcc7d12ddbfbb9edd..9e61490a5dd54fa0abbabea199fbef930a114730 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts
@@ -28,3 +28,21 @@
                };
        };
 };
+
+&art {
+       calibration_ath10k: calibration@5000 {
+               reg = <0x5000 0x2f20>;
+       };
+};
+
+&pcie {
+       wifi@0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0 0 0 0 0>;
+
+               mac-address-increment = <1>;
+
+               nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
+               nvmem-cell-names = "mac-address", "calibration";
+       };
+};

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4e640f9e1b459b9a61f416435266f20b03376731..b8dc2042ea003d7151db44c43966855415343b77 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -250,7 +250,6 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       tplink,eap225-outdoor-v1|\
        tplink,eap225-v3|\
        tplink,eap225-wall-v2)
                caldata_extract "art" 0x5000 0x2f20