mediatek: 6.6: drop backport patches
authorDaniel Golle <daniel@makrotopia.org>
Fri, 1 Mar 2024 01:57:56 +0000 (01:57 +0000)
committerDaniel Golle <daniel@makrotopia.org>
Mon, 11 Mar 2024 21:22:12 +0000 (21:22 +0000)
Drop all backport patches that are now included in kernel 6.6.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
99 files changed:
target/linux/mediatek/patches-6.6/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch [deleted file]
target/linux/mediatek/patches-6.6/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch [deleted file]
target/linux/mediatek/patches-6.6/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch [deleted file]
target/linux/mediatek/patches-6.6/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch [deleted file]
target/linux/mediatek/patches-6.6/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch [deleted file]
target/linux/mediatek/patches-6.6/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch [deleted file]
target/linux/mediatek/patches-6.6/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch [deleted file]
target/linux/mediatek/patches-6.6/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch [deleted file]
target/linux/mediatek/patches-6.6/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch [deleted file]
target/linux/mediatek/patches-6.6/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch [deleted file]
target/linux/mediatek/patches-6.6/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch [deleted file]
target/linux/mediatek/patches-6.6/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch [deleted file]
target/linux/mediatek/patches-6.6/012-v6.5-arm64-dts-mt7986-add-PWM.patch [deleted file]
target/linux/mediatek/patches-6.6/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch [deleted file]
target/linux/mediatek/patches-6.6/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch [deleted file]
target/linux/mediatek/patches-6.6/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch [deleted file]
target/linux/mediatek/patches-6.6/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch [deleted file]
target/linux/mediatek/patches-6.6/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch [deleted file]
target/linux/mediatek/patches-6.6/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch [deleted file]
target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch [deleted file]
target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch [deleted file]
target/linux/mediatek/patches-6.6/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch [deleted file]
target/linux/mediatek/patches-6.6/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch [deleted file]
target/linux/mediatek/patches-6.6/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch [deleted file]
target/linux/mediatek/patches-6.6/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch [deleted file]
target/linux/mediatek/patches-6.6/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch [deleted file]
target/linux/mediatek/patches-6.6/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch [deleted file]
target/linux/mediatek/patches-6.6/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch [deleted file]
target/linux/mediatek/patches-6.6/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch [deleted file]
target/linux/mediatek/patches-6.6/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch [deleted file]
target/linux/mediatek/patches-6.6/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch [deleted file]
target/linux/mediatek/patches-6.6/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch [deleted file]
target/linux/mediatek/patches-6.6/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch [deleted file]
target/linux/mediatek/patches-6.6/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch [deleted file]
target/linux/mediatek/patches-6.6/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch [deleted file]
target/linux/mediatek/patches-6.6/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch [deleted file]
target/linux/mediatek/patches-6.6/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch [deleted file]
target/linux/mediatek/patches-6.6/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch [deleted file]
target/linux/mediatek/patches-6.6/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch [deleted file]
target/linux/mediatek/patches-6.6/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch [deleted file]
target/linux/mediatek/patches-6.6/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch [deleted file]
target/linux/mediatek/patches-6.6/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch [deleted file]
target/linux/mediatek/patches-6.6/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch [deleted file]
target/linux/mediatek/patches-6.6/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch [deleted file]
target/linux/mediatek/patches-6.6/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch [deleted file]
target/linux/mediatek/patches-6.6/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch [deleted file]
target/linux/mediatek/patches-6.6/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch [deleted file]
target/linux/mediatek/patches-6.6/405-v6.2-mt7986-trng-add-rng-support.patch [deleted file]
target/linux/mediatek/patches-6.6/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch [deleted file]
target/linux/mediatek/patches-6.6/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch [deleted file]
target/linux/mediatek/patches-6.6/804-v6.2-pwm-add-mt7986-support.patch [deleted file]
target/linux/mediatek/patches-6.6/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch [deleted file]
target/linux/mediatek/patches-6.6/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch [deleted file]
target/linux/mediatek/patches-6.6/851-v6.2-i2c-mediatek-add-mt7986-support.patch [deleted file]
target/linux/mediatek/patches-6.6/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch [deleted file]
target/linux/mediatek/patches-6.6/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch [deleted file]
target/linux/mediatek/patches-6.6/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch [deleted file]
target/linux/mediatek/patches-6.6/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch [deleted file]

diff --git a/target/linux/mediatek/patches-6.6/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch b/target/linux/mediatek/patches-6.6/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch
deleted file mode 100644 (file)
index 17c5c60..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-From 363547d2191cbc32ca954ba75d72908712398ff2 Mon Sep 17 00:00:00 2001
-From: Andrew Davis <afd@ti.com>
-Date: Mon, 24 Oct 2022 12:34:28 -0500
-Subject: [PATCH] kbuild: Allow DTB overlays to built from .dtso named source
- files
-
-Currently DTB Overlays (.dtbo) are build from source files with the same
-extension (.dts) as the base DTs (.dtb). This may become confusing and
-even lead to wrong results. For example, a composite DTB (created from a
-base DTB and a set of overlays) might have the same name as one of the
-overlays that create it.
-
-Different files should be generated from differently named sources.
- .dtb  <-> .dts
- .dtbo <-> .dtso
-
-We do not remove the ability to compile DTBO files from .dts files here,
-only add a new rule allowing the .dtso file name. The current .dts named
-overlays can be renamed with time. After all have been renamed we can
-remove the other rule.
-
-Signed-off-by: Andrew Davis <afd@ti.com>
-Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Reviewed-by: Frank Rowand <frowand.list@gmail.com>
-Tested-by: Frank Rowand <frowand.list@gmail.com>
-Link: https://lore.kernel.org/r/20221024173434.32518-2-afd@ti.com
-Signed-off-by: Rob Herring <robh@kernel.org>
----
- scripts/Makefile.lib | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -408,6 +408,9 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) $(DT_T
- $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
-       $(call if_changed_dep,dtc)
-+$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
-+      $(call if_changed_dep,dtc)
-+
- dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
- # Bzip2
diff --git a/target/linux/mediatek/patches-6.6/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch b/target/linux/mediatek/patches-6.6/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch
deleted file mode 100644 (file)
index 970e0f9..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-From 2c4daed9580164522859fa100128be408cc69be2 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:16 +0100
-Subject: [PATCH 01/19] arm64: dts: mediatek: mt7986: add support for RX
- Wireless Ethernet Dispatch
-
-Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet
-Dispatch to offload traffic received by the wlan interface to lan/wan
-one.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 65 +++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -76,6 +76,47 @@
-                       no-map;
-                       reg = <0 0x4fc00000 0 0x00100000>;
-               };
-+
-+              wo_emi0: wo-emi@4fd00000 {
-+                      reg = <0 0x4fd00000 0 0x40000>;
-+                      no-map;
-+              };
-+
-+              wo_emi1: wo-emi@4fd40000 {
-+                      reg = <0 0x4fd40000 0 0x40000>;
-+                      no-map;
-+              };
-+
-+              wo_ilm0: wo-ilm@151e0000 {
-+                      reg = <0 0x151e0000 0 0x8000>;
-+                      no-map;
-+              };
-+
-+              wo_ilm1: wo-ilm@151f0000 {
-+                      reg = <0 0x151f0000 0 0x8000>;
-+                      no-map;
-+              };
-+
-+              wo_data: wo-data@4fd80000 {
-+                      reg = <0 0x4fd80000 0 0x240000>;
-+                      no-map;
-+              };
-+
-+              wo_dlm0: wo-dlm@151e8000 {
-+                      reg = <0 0x151e8000 0 0x2000>;
-+                      no-map;
-+              };
-+
-+              wo_dlm1: wo-dlm@151f8000 {
-+                      reg = <0 0x151f8000 0 0x2000>;
-+                      no-map;
-+              };
-+
-+              wo_boot: wo-boot@15194000 {
-+                      reg = <0 0x15194000 0 0x1000>;
-+                      no-map;
-+              };
-+
-       };
-       timer {
-@@ -239,6 +280,11 @@
-                       reg = <0 0x15010000 0 0x1000>;
-                       interrupt-parent = <&gic>;
-                       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-+                      memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
-+                                      <&wo_data>, <&wo_boot>;
-+                      memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
-+                                            "wo-data", "wo-boot";
-+                      mediatek,wo-ccif = <&wo_ccif0>;
-               };
-               wed1: wed@15011000 {
-@@ -247,6 +293,25 @@
-                       reg = <0 0x15011000 0 0x1000>;
-                       interrupt-parent = <&gic>;
-                       interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-+                      memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
-+                                      <&wo_data>, <&wo_boot>;
-+                      memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
-+                                            "wo-data", "wo-boot";
-+                      mediatek,wo-ccif = <&wo_ccif1>;
-+              };
-+
-+              wo_ccif0: syscon@151a5000 {
-+                      compatible = "mediatek,mt7986-wo-ccif", "syscon";
-+                      reg = <0 0x151a5000 0 0x1000>;
-+                      interrupt-parent = <&gic>;
-+                      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              wo_ccif1: syscon@151ad000 {
-+                      compatible = "mediatek,mt7986-wo-ccif", "syscon";
-+                      reg = <0 0x151ad000 0 0x1000>;
-+                      interrupt-parent = <&gic>;
-+                      interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-               };
-               eth: ethernet@15100000 {
diff --git a/target/linux/mediatek/patches-6.6/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch b/target/linux/mediatek/patches-6.6/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch
deleted file mode 100644 (file)
index b509168..0000000
+++ /dev/null
@@ -1,166 +0,0 @@
-From 438e53828c08cf0e8a65b61cf6ce1e4b6620551a Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:50:24 +0100
-Subject: [PATCH 02/19] arm64: dts: mt7986: harmonize device node order
-
-This arrange device tree nodes in alphabetical order.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106085034.12582-2-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 94 ++++++++++----------
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 22 ++---
- 2 files changed, 58 insertions(+), 58 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -54,6 +54,53 @@
-       };
- };
-+&pio {
-+      uart1_pins: uart1-pins {
-+              mux {
-+                      function = "uart";
-+                      groups = "uart1";
-+              };
-+      };
-+
-+      uart2_pins: uart2-pins {
-+              mux {
-+                      function = "uart";
-+                      groups = "uart2";
-+              };
-+      };
-+
-+      wf_2g_5g_pins: wf-2g-5g-pins {
-+              mux {
-+                      function = "wifi";
-+                      groups = "wf_2g", "wf_5g";
-+              };
-+              conf {
-+                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+                             "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+                             "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+                             "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+                             "WF1_TOP_CLK", "WF1_TOP_DATA";
-+                      drive-strength = <4>;
-+              };
-+      };
-+
-+      wf_dbdc_pins: wf-dbdc-pins {
-+              mux {
-+                      function = "wifi";
-+                      groups = "wf_dbdc";
-+              };
-+              conf {
-+                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+                             "WF0_TOP_CLK", "WF0_TOP_DATA";
-+                      drive-strength = <4>;
-+              };
-+      };
-+};
-+
- &switch {
-       ports {
-               #address-cells = <1>;
-@@ -121,50 +168,3 @@
-       pinctrl-0 = <&wf_2g_5g_pins>;
-       pinctrl-1 = <&wf_dbdc_pins>;
- };
--
--&pio {
--      uart1_pins: uart1-pins {
--              mux {
--                      function = "uart";
--                      groups = "uart1";
--              };
--      };
--
--      uart2_pins: uart2-pins {
--              mux {
--                      function = "uart";
--                      groups = "uart2";
--              };
--      };
--
--      wf_2g_5g_pins: wf-2g-5g-pins {
--              mux {
--                      function = "wifi";
--                      groups = "wf_2g", "wf_5g";
--              };
--              conf {
--                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
--                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
--                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
--                             "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
--                             "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
--                             "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
--                             "WF1_TOP_CLK", "WF1_TOP_DATA";
--                      drive-strength = <4>;
--              };
--      };
--
--      wf_dbdc_pins: wf-dbdc-pins {
--              mux {
--                      function = "wifi";
--                      groups = "wf_dbdc";
--              };
--              conf {
--                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
--                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
--                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
--                             "WF0_TOP_CLK", "WF0_TOP_DATA";
--                      drive-strength = <4>;
--              };
--      };
--};
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -25,10 +25,6 @@
-       };
- };
--&uart0 {
--      status = "okay";
--};
--
- &eth {
-       status = "okay";
-@@ -99,13 +95,6 @@
-       };
- };
--&wifi {
--      status = "okay";
--      pinctrl-names = "default", "dbdc";
--      pinctrl-0 = <&wf_2g_5g_pins>;
--      pinctrl-1 = <&wf_dbdc_pins>;
--};
--
- &pio {
-       wf_2g_5g_pins: wf-2g-5g-pins {
-               mux {
-@@ -138,3 +127,14 @@
-               };
-       };
- };
-+
-+&uart0 {
-+      status = "okay";
-+};
-+
-+&wifi {
-+      status = "okay";
-+      pinctrl-names = "default", "dbdc";
-+      pinctrl-0 = <&wf_2g_5g_pins>;
-+      pinctrl-1 = <&wf_dbdc_pins>;
-+};
diff --git a/target/linux/mediatek/patches-6.6/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch b/target/linux/mediatek/patches-6.6/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch
deleted file mode 100644 (file)
index 5706531..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From ffb05357b47f06b2b4d1e14ba89169e28feb727b Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:50:27 +0100
-Subject: [PATCH 03/19] arm64: dts: mt7986: add crypto related device nodes
-
-This patch adds crypto engine support for MT7986.
-
-Signed-off-by: Vic Wu <vic.wu@mediatek.com>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20221106085034.12582-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  4 ++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 15 +++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  4 ++++
- 3 files changed, 23 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -25,6 +25,10 @@
-       };
- };
-+&crypto {
-+      status = "okay";
-+};
-+
- &eth {
-       status = "okay";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -223,6 +223,21 @@
-                       status = "disabled";
-               };
-+              crypto: crypto@10320000 {
-+                      compatible = "inside-secure,safexcel-eip97";
-+                      reg = <0 0x10320000 0 0x40000>;
-+                      interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-+                      interrupt-names = "ring0", "ring1", "ring2", "ring3";
-+                      clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-+                      clock-names = "infra_eip97_ck";
-+                      assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
-+                      assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
-+                      status = "disabled";
-+              };
-+
-               uart0: serial@11002000 {
-                       compatible = "mediatek,mt7986-uart",
-                                    "mediatek,mt6577-uart";
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -25,6 +25,10 @@
-       };
- };
-+&crypto {
-+      status = "okay";
-+};
-+
- &eth {
-       status = "okay";
diff --git a/target/linux/mediatek/patches-6.6/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch b/target/linux/mediatek/patches-6.6/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch
deleted file mode 100644 (file)
index 0e5b77a..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From b49b7dc404ded1d89cbc568d875009a5c1ed4ef6 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 6 Nov 2022 09:50:29 +0100
-Subject: [PATCH 04/19] arm64: dts: mt7986: add i2c node
-
-Add i2c Node to mt7986 devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20221106085034.12582-7-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -279,6 +279,20 @@
-                       status = "disabled";
-               };
-+              i2c0: i2c@11008000 {
-+                      compatible = "mediatek,mt7986-i2c";
-+                      reg = <0 0x11008000 0 0x90>,
-+                            <0 0x10217080 0 0x80>;
-+                      interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+                      clock-div = <5>;
-+                      clocks = <&infracfg CLK_INFRA_I2C0_CK>,
-+                               <&infracfg CLK_INFRA_AP_DMA_CK>;
-+                      clock-names = "main", "dma";
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      status = "disabled";
-+              };
-+
-               ethsys: syscon@15000000 {
-                        #address-cells = <1>;
-                        #size-cells = <1>;
diff --git a/target/linux/mediatek/patches-6.6/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch b/target/linux/mediatek/patches-6.6/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch
deleted file mode 100644 (file)
index 8201b47..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 2cd6022800d6da7822e169f3e6f7f790c1431445 Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <mbrugger@suse.com>
-Date: Mon, 14 Nov 2022 13:16:53 +0100
-Subject: [PATCH 05/19] arm64: dts: mediatek: mt7986: Add SoC compatible
-
-Missing SoC compatible in the board file causes dt bindings check.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Link: https://lore.kernel.org/r/20221114121653.14739-1-matthias.bgg@kernel.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 2 +-
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 1 +
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 2 +-
- arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 3 +++
- 4 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -9,7 +9,7 @@
- / {
-       model = "MediaTek MT7986a RFB";
--      compatible = "mediatek,mt7986a-rfb";
-+      compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
-       aliases {
-               serial0 = &uart0;
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -10,6 +10,7 @@
- #include <dt-bindings/reset/mt7986-resets.h>
- / {
-+      compatible = "mediatek,mt7986a";
-       interrupt-parent = <&gic>;
-       #address-cells = <2>;
-       #size-cells = <2>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -9,7 +9,7 @@
- / {
-       model = "MediaTek MT7986b RFB";
--      compatible = "mediatek,mt7986b-rfb";
-+      compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
-       aliases {
-               serial0 = &uart0;
---- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
-@@ -5,6 +5,9 @@
-  */
- #include "mt7986a.dtsi"
-+/ {
-+      compatible = "mediatek,mt7986b";
-+};
- &pio {
-       compatible = "mediatek,mt7986b-pinctrl";
diff --git a/target/linux/mediatek/patches-6.6/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch b/target/linux/mediatek/patches-6.6/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch
deleted file mode 100644 (file)
index 3e5e3d8..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-From f4029538f063a845dc9aae46cce4cf386e6253a5 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 18 Nov 2022 20:01:21 +0100
-Subject: [PATCH 06/19] arm64: dts: mt7986: add spi related device nodes
-
-This patch adds spi support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221118190126.100895-7-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 28 ++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++
- 3 files changed, 98 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -59,6 +59,20 @@
- };
- &pio {
-+      spi_flash_pins: spi-flash-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi0", "spi0_wp_hold";
-+              };
-+      };
-+
-+      spic_pins: spic-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi1_2";
-+              };
-+      };
-+
-       uart1_pins: uart1-pins {
-               mux {
-                       function = "uart";
-@@ -105,6 +119,27 @@
-       };
- };
-+&spi0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spi_flash_pins>;
-+      cs-gpios = <0>, <0>;
-+      status = "okay";
-+      spi_nand: spi_nand@0 {
-+              compatible = "spi-nand";
-+              reg = <0>;
-+              spi-max-frequency = <10000000>;
-+              spi-tx-bus-width = <4>;
-+              spi-rx-bus-width = <4>;
-+      };
-+};
-+
-+&spi1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spic_pins>;
-+      cs-gpios = <0>, <0>;
-+      status = "okay";
-+};
-+
- &switch {
-       ports {
-               #address-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -294,6 +294,34 @@
-                       status = "disabled";
-               };
-+              spi0: spi@1100a000 {
-+                      compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      reg = <0 0x1100a000 0 0x100>;
-+                      interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&topckgen CLK_TOP_MPLL_D2>,
-+                               <&topckgen CLK_TOP_SPI_SEL>,
-+                               <&infracfg CLK_INFRA_SPI0_CK>,
-+                               <&infracfg CLK_INFRA_SPI0_HCK_CK>;
-+                      clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
-+                      status = "disabled";
-+              };
-+
-+              spi1: spi@1100b000 {
-+                      compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      reg = <0 0x1100b000 0 0x100>;
-+                      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&topckgen CLK_TOP_MPLL_D2>,
-+                               <&topckgen CLK_TOP_SPIM_MST_SEL>,
-+                               <&infracfg CLK_INFRA_SPI1_CK>,
-+                               <&infracfg CLK_INFRA_SPI1_HCK_CK>;
-+                      clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
-+                      status = "disabled";
-+              };
-+
-               ethsys: syscon@15000000 {
-                        #address-cells = <1>;
-                        #size-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -100,6 +100,20 @@
- };
- &pio {
-+      spi_flash_pins: spi-flash-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi0", "spi0_wp_hold";
-+              };
-+      };
-+
-+      spic_pins: spic-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi1_2";
-+              };
-+      };
-+
-       wf_2g_5g_pins: wf-2g-5g-pins {
-               mux {
-                       function = "wifi";
-@@ -132,6 +146,27 @@
-       };
- };
-+&spi0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spi_flash_pins>;
-+      cs-gpios = <0>, <0>;
-+      status = "okay";
-+      spi_nand: spi_nand@0 {
-+              compatible = "spi-nand";
-+              reg = <0>;
-+              spi-max-frequency = <10000000>;
-+              spi-tx-bus-width = <4>;
-+              spi-rx-bus-width = <4>;
-+      };
-+};
-+
-+&spi1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spic_pins>;
-+      cs-gpios = <0>, <0>;
-+      status = "okay";
-+};
-+
- &uart0 {
-       status = "okay";
- };
diff --git a/target/linux/mediatek/patches-6.6/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch b/target/linux/mediatek/patches-6.6/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch
deleted file mode 100644 (file)
index 53567c6..0000000
+++ /dev/null
@@ -1,127 +0,0 @@
-From 9e8e24ab716098e617195ce29b88e84608bf2108 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:42 +0100
-Subject: [PATCH 07/19] arm64: dts: mt7986: add usb related device nodes
-
-This patch adds USB support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Link: https://lore.kernel.org/r/20230106152845.88717-3-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  8 +++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 55 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  8 +++
- 3 files changed, 71 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -140,6 +140,10 @@
-       status = "okay";
- };
-+&ssusb {
-+      status = "okay";
-+};
-+
- &switch {
-       ports {
-               #address-cells = <1>;
-@@ -201,6 +205,10 @@
-       status = "okay";
- };
-+&usb_phy {
-+      status = "okay";
-+};
-+
- &wifi {
-       status = "okay";
-       pinctrl-names = "default", "dbdc";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -322,6 +322,61 @@
-                       status = "disabled";
-               };
-+              ssusb: usb@11200000 {
-+                      compatible = "mediatek,mt7986-xhci",
-+                                   "mediatek,mtk-xhci";
-+                      reg = <0 0x11200000 0 0x2e00>,
-+                            <0 0x11203e00 0 0x0100>;
-+                      reg-names = "mac", "ippc";
-+                      interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
-+                               <&infracfg CLK_INFRA_IUSB_CK>,
-+                               <&infracfg CLK_INFRA_IUSB_133_CK>,
-+                               <&infracfg CLK_INFRA_IUSB_66M_CK>,
-+                               <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
-+                      clock-names = "sys_ck",
-+                                    "ref_ck",
-+                                    "mcu_ck",
-+                                    "dma_ck",
-+                                    "xhci_ck";
-+                      phys = <&u2port0 PHY_TYPE_USB2>,
-+                             <&u3port0 PHY_TYPE_USB3>,
-+                             <&u2port1 PHY_TYPE_USB2>;
-+                      status = "disabled";
-+              };
-+
-+              usb_phy: t-phy@11e10000 {
-+                      compatible = "mediatek,mt7986-tphy",
-+                                   "mediatek,generic-tphy-v2";
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+                      ranges = <0 0 0x11e10000 0x1700>;
-+                      status = "disabled";
-+
-+                      u2port0: usb-phy@0 {
-+                              reg = <0x0 0x700>;
-+                              clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
-+                                       <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
-+                              clock-names = "ref", "da_ref";
-+                              #phy-cells = <1>;
-+                      };
-+
-+                      u3port0: usb-phy@700 {
-+                              reg = <0x700 0x900>;
-+                              clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
-+                              clock-names = "ref";
-+                              #phy-cells = <1>;
-+                      };
-+
-+                      u2port1: usb-phy@1000 {
-+                              reg = <0x1000 0x700>;
-+                              clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
-+                                       <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
-+                              clock-names = "ref", "da_ref";
-+                              #phy-cells = <1>;
-+                      };
-+              };
-+
-               ethsys: syscon@15000000 {
-                        #address-cells = <1>;
-                        #size-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -167,10 +167,18 @@
-       status = "okay";
- };
-+&ssusb {
-+      status = "okay";
-+};
-+
- &uart0 {
-       status = "okay";
- };
-+&usb_phy {
-+      status = "okay";
-+};
-+
- &wifi {
-       status = "okay";
-       pinctrl-names = "default", "dbdc";
diff --git a/target/linux/mediatek/patches-6.6/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch b/target/linux/mediatek/patches-6.6/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch
deleted file mode 100644 (file)
index 9c0a481..0000000
+++ /dev/null
@@ -1,160 +0,0 @@
-From c1744e9e75a6a8abc7c893f349bcbf725b9c0d74 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:43 +0100
-Subject: [PATCH 08/19] arm64: dts: mt7986: add mmc related device nodes
-
-This patch adds mmc support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230106152845.88717-4-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 96 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 15 +++
- 2 files changed, 111 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -5,6 +5,8 @@
-  */
- /dts-v1/;
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+
- #include "mt7986a.dtsi"
- / {
-@@ -23,6 +25,24 @@
-               device_type = "memory";
-               reg = <0 0x40000000 0 0x40000000>;
-       };
-+
-+      reg_1p8v: regulator-1p8v {
-+              compatible = "regulator-fixed";
-+              regulator-name = "fixed-1.8V";
-+              regulator-min-microvolt = <1800000>;
-+              regulator-max-microvolt = <1800000>;
-+              regulator-boot-on;
-+              regulator-always-on;
-+      };
-+
-+      reg_3p3v: regulator-3p3v {
-+              compatible = "regulator-fixed";
-+              regulator-name = "fixed-3.3V";
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              regulator-boot-on;
-+              regulator-always-on;
-+      };
- };
- &crypto {
-@@ -58,7 +78,83 @@
-       };
- };
-+&mmc0 {
-+      pinctrl-names = "default", "state_uhs";
-+      pinctrl-0 = <&mmc0_pins_default>;
-+      pinctrl-1 = <&mmc0_pins_uhs>;
-+      bus-width = <8>;
-+      max-frequency = <200000000>;
-+      cap-mmc-highspeed;
-+      mmc-hs200-1_8v;
-+      mmc-hs400-1_8v;
-+      hs400-ds-delay = <0x14014>;
-+      vmmc-supply = <&reg_3p3v>;
-+      vqmmc-supply = <&reg_1p8v>;
-+      non-removable;
-+      no-sd;
-+      no-sdio;
-+      status = "okay";
-+};
-+
- &pio {
-+      mmc0_pins_default: mmc0-pins {
-+              mux {
-+                      function = "emmc";
-+                      groups = "emmc_51";
-+              };
-+              conf-cmd-dat {
-+                      pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+                             "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+                             "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+                      input-enable;
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+              conf-clk {
-+                      pins = "EMMC_CK";
-+                      drive-strength = <6>;
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-ds {
-+                      pins = "EMMC_DSL";
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-rst {
-+                      pins = "EMMC_RSTB";
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+      };
-+
-+      mmc0_pins_uhs: mmc0-uhs-pins {
-+              mux {
-+                      function = "emmc";
-+                      groups = "emmc_51";
-+              };
-+              conf-cmd-dat {
-+                      pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+                             "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+                             "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+                      input-enable;
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+              conf-clk {
-+                      pins = "EMMC_CK";
-+                      drive-strength = <6>;
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-ds {
-+                      pins = "EMMC_DSL";
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-rst {
-+                      pins = "EMMC_RSTB";
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+      };
-+
-       spi_flash_pins: spi-flash-pins {
-               mux {
-                       function = "spi";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -345,6 +345,21 @@
-                       status = "disabled";
-               };
-+              mmc0: mmc@11230000 {
-+                      compatible = "mediatek,mt7986-mmc";
-+                      reg = <0 0x11230000 0 0x1000>,
-+                            <0 0x11c20000 0 0x1000>;
-+                      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
-+                               <&infracfg CLK_INFRA_MSDC_HCK_CK>,
-+                               <&infracfg CLK_INFRA_MSDC_CK>,
-+                               <&infracfg CLK_INFRA_MSDC_133M_CK>,
-+                               <&infracfg CLK_INFRA_MSDC_66M_CK>;
-+                      clock-names = "source", "hclk", "source_cg", "bus_clk",
-+                                    "sys_cg";
-+                      status = "disabled";
-+              };
-+
-               usb_phy: t-phy@11e10000 {
-                       compatible = "mediatek,mt7986-tphy",
-                                    "mediatek,generic-tphy-v2";
diff --git a/target/linux/mediatek/patches-6.6/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch b/target/linux/mediatek/patches-6.6/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch
deleted file mode 100644 (file)
index adc6394..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From 87a42ef1d6cf602e4aa40555b4404cad6149a90f Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:44 +0100
-Subject: [PATCH 09/19] arm64: dts: mt7986: add pcie related device nodes
-
-This patch adds PCIe support for MT7986.
-
-Signed-off-by: Jieyy Yang <jieyy.yang@mediatek.com>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230106152845.88717-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 52 ++++++++++++++++++++
- 2 files changed, 68 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -93,6 +93,15 @@
-       non-removable;
-       no-sd;
-       no-sdio;
-+};
-+
-+&pcie {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&pcie_pins>;
-+      status = "okay";
-+};
-+
-+&pcie_phy {
-       status = "okay";
- };
-@@ -155,6 +164,13 @@
-               };
-       };
-+      pcie_pins: pcie-pins {
-+              mux {
-+                      function = "pcie";
-+                      groups = "pcie_clk", "pcie_wake", "pcie_pereset";
-+              };
-+      };
-+
-       spi_flash_pins: spi-flash-pins {
-               mux {
-                       function = "spi";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -8,6 +8,7 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt7986-clk.h>
- #include <dt-bindings/reset/mt7986-resets.h>
-+#include <dt-bindings/phy/phy.h>
- / {
-       compatible = "mediatek,mt7986a";
-@@ -360,6 +361,57 @@
-                       status = "disabled";
-               };
-+              pcie: pcie@11280000 {
-+                      compatible = "mediatek,mt7986-pcie",
-+                                   "mediatek,mt8192-pcie";
-+                      device_type = "pci";
-+                      #address-cells = <3>;
-+                      #size-cells = <2>;
-+                      reg = <0x00 0x11280000 0x00 0x4000>;
-+                      reg-names = "pcie-mac";
-+                      interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-+                      bus-range = <0x00 0xff>;
-+                      ranges = <0x82000000 0x00 0x20000000 0x00
-+                                0x20000000 0x00 0x10000000>;
-+                      clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
-+                               <&infracfg CLK_INFRA_IPCIE_CK>,
-+                               <&infracfg CLK_INFRA_IPCIER_CK>,
-+                               <&infracfg CLK_INFRA_IPCIEB_CK>;
-+                      clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-+                      status = "disabled";
-+
-+                      phys = <&pcie_port PHY_TYPE_PCIE>;
-+                      phy-names = "pcie-phy";
-+
-+                      #interrupt-cells = <1>;
-+                      interrupt-map-mask = <0 0 0 0x7>;
-+                      interrupt-map = <0 0 0 1 &pcie_intc 0>,
-+                                      <0 0 0 2 &pcie_intc 1>,
-+                                      <0 0 0 3 &pcie_intc 2>,
-+                                      <0 0 0 4 &pcie_intc 3>;
-+                      pcie_intc: interrupt-controller {
-+                              #address-cells = <0>;
-+                              #interrupt-cells = <1>;
-+                              interrupt-controller;
-+                      };
-+              };
-+
-+              pcie_phy: t-phy@11c00000 {
-+                      compatible = "mediatek,mt7986-tphy",
-+                                   "mediatek,generic-tphy-v2";
-+                      #address-cells = <2>;
-+                      #size-cells = <2>;
-+                      ranges;
-+                      status = "disabled";
-+
-+                      pcie_port: pcie-phy@11c00000 {
-+                              reg = <0 0x11c00000 0 0x20000>;
-+                              clocks = <&clk40m>;
-+                              clock-names = "ref";
-+                              #phy-cells = <1>;
-+                      };
-+              };
-+
-               usb_phy: t-phy@11e10000 {
-                       compatible = "mediatek,mt7986-tphy",
-                                    "mediatek,generic-tphy-v2";
diff --git a/target/linux/mediatek/patches-6.6/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch b/target/linux/mediatek/patches-6.6/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch
deleted file mode 100644 (file)
index 38f159c..0000000
+++ /dev/null
@@ -1,689 +0,0 @@
-From a751f7412e0098801673b80bc7a4738ae7d710ce Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Fri, 6 Jan 2023 16:28:45 +0100
-Subject: [PATCH 10/19] arm64: dts: mt7986: add Bananapi R3
-
-Add support for Bananapi R3 SBC.
-
-- SD/eMMC support (switching first 4 bits of data-bus with sw6/D)
-- SPI-NAND/NOR support (switched CS by sw5/C)
-- all rj45 ports and both SFP working (eth1/lan4)
-- all USB-Ports + SIM-Slot tested
-- i2c and all uarts tested
-- wifi tested (with eeprom calibration data)
-
-The device can boot from all 4 storage options. Both, SPI and MMC, can
-be switched using hardware switches on the board, see
-https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/Makefile         |   5 +
- .../mt7986a-bananapi-bpi-r3-emmc.dtso         |  29 ++
- .../mt7986a-bananapi-bpi-r3-nand.dtso         |  55 +++
- .../mediatek/mt7986a-bananapi-bpi-r3-nor.dtso |  68 +++
- .../mediatek/mt7986a-bananapi-bpi-r3-sd.dtso  |  23 +
- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts  | 450 ++++++++++++++++++
- 6 files changed, 630 insertions(+)
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-
---- a/arch/arm64/boot/dts/mediatek/Makefile
-+++ b/arch/arm64/boot/dts/mediatek/Makefile
-@@ -7,6 +7,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-ev
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
-@@ -0,0 +1,29 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Author: Sam.Shih <sam.shih@mediatek.com>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+      fragment@0 {
-+              target-path = "/soc/mmc@11230000";
-+              __overlay__ {
-+                      bus-width = <8>;
-+                      max-frequency = <200000000>;
-+                      cap-mmc-highspeed;
-+                      mmc-hs200-1_8v;
-+                      mmc-hs400-1_8v;
-+                      hs400-ds-delay = <0x14014>;
-+                      non-removable;
-+                      no-sd;
-+                      no-sdio;
-+                      status = "okay";
-+              };
-+      };
-+};
-+
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -0,0 +1,55 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
-+/*
-+ * Authors: Daniel Golle <daniel@makrotopia.org>
-+ *          Frank Wunderlich <frank-w@public-files.de>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+      fragment@0 {
-+              target-path = "/soc/spi@1100a000";
-+              __overlay__ {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      spi_nand: spi_nand@0 {
-+                              compatible = "spi-nand";
-+                              reg = <0>;
-+                              spi-max-frequency = <10000000>;
-+                              spi-tx-bus-width = <4>;
-+                              spi-rx-bus-width = <4>;
-+
-+                              partitions {
-+                                      compatible = "fixed-partitions";
-+                                      #address-cells = <1>;
-+                                      #size-cells = <1>;
-+
-+                                      partition@0 {
-+                                              label = "bl2";
-+                                              reg = <0x0 0x80000>;
-+                                              read-only;
-+                                      };
-+
-+                                      partition@80000 {
-+                                              label = "reserved";
-+                                              reg = <0x80000 0x300000>;
-+                                      };
-+
-+                                      partition@380000 {
-+                                              label = "fip";
-+                                              reg = <0x380000 0x200000>;
-+                                              read-only;
-+                                      };
-+
-+                                      partition@580000 {
-+                                              label = "ubi";
-+                                              reg = <0x580000 0x7a80000>;
-+                                      };
-+                              };
-+                      };
-+              };
-+      };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-@@ -0,0 +1,68 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
-+/*
-+ * Authors: Daniel Golle <daniel@makrotopia.org>
-+ *          Frank Wunderlich <frank-w@public-files.de>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+      fragment@0 {
-+              target-path = "/soc/spi@1100a000";
-+              __overlay__ {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      flash@0 {
-+                              compatible = "jedec,spi-nor";
-+                              reg = <0>;
-+                              spi-max-frequency = <10000000>;
-+
-+                              partitions {
-+                                      compatible = "fixed-partitions";
-+                                      #address-cells = <1>;
-+                                      #size-cells = <1>;
-+
-+                                      partition@0 {
-+                                              label = "bl2";
-+                                              reg = <0x0 0x20000>;
-+                                              read-only;
-+                                      };
-+
-+                                      partition@20000 {
-+                                              label = "reserved";
-+                                              reg = <0x20000 0x20000>;
-+                                      };
-+
-+                                      partition@40000 {
-+                                              label = "u-boot-env";
-+                                              reg = <0x40000 0x40000>;
-+                                      };
-+
-+                                      partition@80000 {
-+                                              label = "reserved2";
-+                                              reg = <0x80000 0x80000>;
-+                                      };
-+
-+                                      partition@100000 {
-+                                              label = "fip";
-+                                              reg = <0x100000 0x80000>;
-+                                              read-only;
-+                                      };
-+
-+                                      partition@180000 {
-+                                              label = "recovery";
-+                                              reg = <0x180000 0xa80000>;
-+                                      };
-+
-+                                      partition@c00000 {
-+                                              label = "fit";
-+                                              reg = <0xc00000 0x1400000>;
-+                                      };
-+                              };
-+                      };
-+              };
-+      };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
-@@ -0,0 +1,23 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Author: Sam.Shih <sam.shih@mediatek.com>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+      fragment@0 {
-+              target-path = "/soc/mmc@11230000";
-+              __overlay__ {
-+                      bus-width = <4>;
-+                      max-frequency = <52000000>;
-+                      cap-sd-highspeed;
-+                      status = "okay";
-+              };
-+      };
-+};
-+
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -0,0 +1,450 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Authors: Sam.Shih <sam.shih@mediatek.com>
-+ *          Frank Wunderlich <frank-w@public-files.de>
-+ *          Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+
-+#include "mt7986a.dtsi"
-+
-+/ {
-+      model = "Bananapi BPI-R3";
-+      compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+      aliases {
-+              serial0 = &uart0;
-+              ethernet0 = &gmac0;
-+              ethernet1 = &gmac1;
-+      };
-+
-+      chosen {
-+              stdout-path = "serial0:115200n8";
-+      };
-+
-+      dcin: regulator-12vd {
-+              compatible = "regulator-fixed";
-+              regulator-name = "12vd";
-+              regulator-min-microvolt = <12000000>;
-+              regulator-max-microvolt = <12000000>;
-+              regulator-boot-on;
-+              regulator-always-on;
-+      };
-+
-+      gpio-keys {
-+              compatible = "gpio-keys";
-+
-+              reset-key {
-+                      label = "reset";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              wps-key {
-+                      label = "wps";
-+                      linux,code = <KEY_WPS_BUTTON>;
-+                      gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+
-+      /* i2c of the left SFP cage (wan) */
-+      i2c_sfp1: i2c-gpio-0 {
-+              compatible = "i2c-gpio";
-+              sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+              scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+              i2c-gpio,delay-us = <2>;
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+      };
-+
-+      /* i2c of the right SFP cage (lan) */
-+      i2c_sfp2: i2c-gpio-1 {
-+              compatible = "i2c-gpio";
-+              sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+              scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+              i2c-gpio,delay-us = <2>;
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+
-+              green_led: led-0 {
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      function = LED_FUNCTION_POWER;
-+                      gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
-+                      default-state = "on";
-+              };
-+
-+              blue_led: led-1 {
-+                      color = <LED_COLOR_ID_BLUE>;
-+                      function = LED_FUNCTION_STATUS;
-+                      gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
-+                      default-state = "off";
-+              };
-+      };
-+
-+      reg_1p8v: regulator-1p8v {
-+              compatible = "regulator-fixed";
-+              regulator-name = "1.8vd";
-+              regulator-min-microvolt = <1800000>;
-+              regulator-max-microvolt = <1800000>;
-+              regulator-boot-on;
-+              regulator-always-on;
-+              vin-supply = <&dcin>;
-+      };
-+
-+      reg_3p3v: regulator-3p3v {
-+              compatible = "regulator-fixed";
-+              regulator-name = "3.3vd";
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              regulator-boot-on;
-+              regulator-always-on;
-+              vin-supply = <&dcin>;
-+      };
-+
-+      /* left SFP cage (wan) */
-+      sfp1: sfp-1 {
-+              compatible = "sff,sfp";
-+              i2c-bus = <&i2c_sfp1>;
-+              los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
-+              mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
-+              tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
-+              tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-+      };
-+
-+      /* right SFP cage (lan) */
-+      sfp2: sfp-2 {
-+              compatible = "sff,sfp";
-+              i2c-bus = <&i2c_sfp2>;
-+              los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
-+              mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
-+              tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
-+              tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
-+      };
-+};
-+
-+&crypto {
-+      status = "okay";
-+};
-+
-+&eth {
-+      status = "okay";
-+
-+      gmac0: mac@0 {
-+              compatible = "mediatek,eth-mac";
-+              reg = <0>;
-+              phy-mode = "2500base-x";
-+
-+              fixed-link {
-+                      speed = <2500>;
-+                      full-duplex;
-+                      pause;
-+              };
-+      };
-+
-+      gmac1: mac@1 {
-+              compatible = "mediatek,eth-mac";
-+              reg = <1>;
-+              phy-mode = "2500base-x";
-+              sfp = <&sfp1>;
-+              managed = "in-band-status";
-+      };
-+
-+      mdio: mdio-bus {
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+      };
-+};
-+
-+&mdio {
-+      switch: switch@1f {
-+              compatible = "mediatek,mt7531";
-+              reg = <31>;
-+              interrupt-controller;
-+              #interrupt-cells = <1>;
-+              interrupt-parent = <&pio>;
-+              interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
-+              reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-+      };
-+};
-+
-+&mmc0 {
-+      pinctrl-names = "default", "state_uhs";
-+      pinctrl-0 = <&mmc0_pins_default>;
-+      pinctrl-1 = <&mmc0_pins_uhs>;
-+      vmmc-supply = <&reg_3p3v>;
-+      vqmmc-supply = <&reg_1p8v>;
-+};
-+
-+&i2c0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&i2c_pins>;
-+      status = "okay";
-+};
-+
-+&pcie {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&pcie_pins>;
-+      status = "okay";
-+};
-+
-+&pcie_phy {
-+      status = "okay";
-+};
-+
-+&pio {
-+      i2c_pins: i2c-pins {
-+              mux {
-+                      function = "i2c";
-+                      groups = "i2c";
-+              };
-+      };
-+
-+      mmc0_pins_default: mmc0-pins {
-+              mux {
-+                      function = "emmc";
-+                      groups = "emmc_51";
-+              };
-+              conf-cmd-dat {
-+                      pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+                             "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+                             "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+                      input-enable;
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+              conf-clk {
-+                      pins = "EMMC_CK";
-+                      drive-strength = <6>;
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-ds {
-+                      pins = "EMMC_DSL";
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-rst {
-+                      pins = "EMMC_RSTB";
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+      };
-+
-+      mmc0_pins_uhs: mmc0-uhs-pins {
-+              mux {
-+                      function = "emmc";
-+                      groups = "emmc_51";
-+              };
-+              conf-cmd-dat {
-+                      pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+                             "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+                             "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+                      input-enable;
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+              conf-clk {
-+                      pins = "EMMC_CK";
-+                      drive-strength = <6>;
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-ds {
-+                      pins = "EMMC_DSL";
-+                      bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+              };
-+              conf-rst {
-+                      pins = "EMMC_RSTB";
-+                      drive-strength = <4>;
-+                      bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+              };
-+      };
-+
-+      pcie_pins: pcie-pins {
-+              mux {
-+                      function = "pcie";
-+                      groups = "pcie_clk", "pcie_pereset";
-+              };
-+      };
-+
-+      spi_flash_pins: spi-flash-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi0", "spi0_wp_hold";
-+              };
-+      };
-+
-+      spic_pins: spic-pins {
-+              mux {
-+                      function = "spi";
-+                      groups = "spi1_0";
-+              };
-+      };
-+
-+      uart1_pins: uart1-pins {
-+              mux {
-+                      function = "uart";
-+                      groups = "uart1_rx_tx";
-+              };
-+      };
-+
-+      uart2_pins: uart2-pins {
-+              mux {
-+                      function = "uart";
-+                      groups = "uart2_0_rx_tx";
-+              };
-+      };
-+
-+      wf_2g_5g_pins: wf-2g-5g-pins {
-+              mux {
-+                      function = "wifi";
-+                      groups = "wf_2g", "wf_5g";
-+              };
-+              conf {
-+                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+                             "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+                             "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+                             "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+                             "WF1_TOP_CLK", "WF1_TOP_DATA";
-+                      drive-strength = <4>;
-+              };
-+      };
-+
-+      wf_dbdc_pins: wf-dbdc-pins {
-+              mux {
-+                      function = "wifi";
-+                      groups = "wf_dbdc";
-+              };
-+              conf {
-+                      pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+                             "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+                             "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+                             "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+                             "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+                             "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+                             "WF1_TOP_CLK", "WF1_TOP_DATA";
-+                      drive-strength = <4>;
-+              };
-+      };
-+
-+      wf_led_pins: wf-led-pins {
-+              mux {
-+                      function = "led";
-+                      groups = "wifi_led";
-+              };
-+      };
-+};
-+
-+&spi0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spi_flash_pins>;
-+      status = "okay";
-+};
-+
-+&spi1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&spic_pins>;
-+      status = "okay";
-+};
-+
-+&ssusb {
-+      status = "okay";
-+};
-+
-+&switch {
-+      ports {
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+
-+              port@0 {
-+                      reg = <0>;
-+                      label = "wan";
-+              };
-+
-+              port@1 {
-+                      reg = <1>;
-+                      label = "lan0";
-+              };
-+
-+              port@2 {
-+                      reg = <2>;
-+                      label = "lan1";
-+              };
-+
-+              port@3 {
-+                      reg = <3>;
-+                      label = "lan2";
-+              };
-+
-+              port@4 {
-+                      reg = <4>;
-+                      label = "lan3";
-+              };
-+
-+              port5: port@5 {
-+                      reg = <5>;
-+                      label = "lan4";
-+                      phy-mode = "2500base-x";
-+                      sfp = <&sfp2>;
-+                      managed = "in-band-status";
-+              };
-+
-+              port@6 {
-+                      reg = <6>;
-+                      label = "cpu";
-+                      ethernet = <&gmac0>;
-+                      phy-mode = "2500base-x";
-+
-+                      fixed-link {
-+                              speed = <2500>;
-+                              full-duplex;
-+                              pause;
-+                      };
-+              };
-+      };
-+};
-+
-+&trng {
-+      status = "okay";
-+};
-+
-+&uart0 {
-+      status = "okay";
-+};
-+
-+&uart1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&uart1_pins>;
-+      status = "okay";
-+};
-+
-+&uart2 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&uart2_pins>;
-+      status = "okay";
-+};
-+
-+&usb_phy {
-+      status = "okay";
-+};
-+
-+&watchdog {
-+      status = "okay";
-+};
-+
-+&wifi {
-+      status = "okay";
-+      pinctrl-names = "default", "dbdc";
-+      pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
-+      pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
-+};
-+
diff --git a/target/linux/mediatek/patches-6.6/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch b/target/linux/mediatek/patches-6.6/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch
deleted file mode 100644 (file)
index 7903833..0000000
+++ /dev/null
@@ -1,323 +0,0 @@
-From 4c2d5411f4b101f7aa0fd74f80109e3afd6dc967 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 17 May 2023 12:11:08 +0200
-Subject: [PATCH 11/19] arm64: mediatek: Propagate chassis-type where possible
-
-The chassis-type string identifies the form-factor of the system:
-add this property to all device trees of devices for which the form
-factor is known.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230517101108.205654-1-angelogioacchino.delregno@collabora.com
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt2712-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt6755-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt6779-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt6795-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt6797-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts                  | 1 +
- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts         | 1 +
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts                     | 1 +
- arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts         | 1 +
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts                     | 1 +
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts                     | 1 +
- arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts                  | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts            | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts                 | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-evb.dts                      | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts     | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts       | 1 +
- .../boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts     | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts       | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts             | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts       | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts      | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts      | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts         | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts       | 1 +
- arch/arm64/boot/dts/mediatek/mt8186-evb.dts                      | 1 +
- 28 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
-@@ -11,6 +11,7 @@
- / {
-       model = "MediaTek MT2712 evaluation board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek MT6755 EVB";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
-@@ -10,6 +10,7 @@
- / {
-       model = "MediaTek MT6779 EVB";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek MT6795 Evaluation Board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek MT6797 Evaluation Board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
-@@ -12,6 +12,7 @@
- / {
-       model = "Mediatek X20 Development Board";
-+      chassis-type = "embedded";
-       compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -15,6 +15,7 @@
- / {
-       model = "Bananapi BPI-R64";
-+      chassis-type = "embedded";
-       compatible = "bananapi,bpi-r64", "mediatek,mt7622";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -15,6 +15,7 @@
- / {
-       model = "MediaTek MT7622 RFB1 board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -16,6 +16,7 @@
- / {
-       model = "Bananapi BPI-R3";
-+      chassis-type = "embedded";
-       compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -11,6 +11,7 @@
- / {
-       model = "MediaTek MT7986a RFB";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek MT7986b RFB";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
-@@ -11,6 +11,7 @@
- / {
-       model = "Pumpkin MT8167";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167";
-       memory@40000000 {
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
-@@ -8,6 +8,7 @@
- / {
-       model = "Google Hanawl";
-+      chassis-type = "laptop";
-       compatible = "google,hana-rev7", "mediatek,mt8173";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
-@@ -8,6 +8,7 @@
- / {
-       model = "Google Hana";
-+      chassis-type = "laptop";
-       compatible = "google,hana-rev6", "google,hana-rev5",
-                    "google,hana-rev4", "google,hana-rev3",
-                    "google,hana", "mediatek,mt8173";
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
-@@ -8,6 +8,7 @@
- / {
-       model = "Google Elm";
-+      chassis-type = "laptop";
-       compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
-                    "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
-                    "google,elm", "mediatek,mt8173";
---- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
-@@ -10,6 +10,7 @@
- / {
-       model = "MediaTek MT8173 evaluation board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
-@@ -11,6 +11,7 @@
- / {
-       model = "MediaTek MT8183 evaluation board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
-       aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "Google burnet board";
-+      chassis-type = "convertible";
-       compatible = "google,burnet", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "Google damu board";
-+      chassis-type = "convertible";
-       compatible = "google,damu", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "Google juniper sku16 board";
-+      chassis-type = "convertible";
-       compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek kakadu board sku22";
-+      chassis-type = "tablet";
-       compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
-                    "google,kakadu", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
-@@ -9,6 +9,7 @@
- / {
-       model = "MediaTek kakadu board";
-+      chassis-type = "tablet";
-       compatible = "google,kakadu-rev3", "google,kakadu-rev2",
-                       "google,kakadu", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
-@@ -12,6 +12,7 @@
- / {
-       model = "MediaTek kodama sku16 board";
-+      chassis-type = "tablet";
-       compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
-@@ -12,6 +12,7 @@
- / {
-       model = "MediaTek kodama sku272 board";
-+      chassis-type = "tablet";
-       compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
-@@ -12,6 +12,7 @@
- / {
-       model = "MediaTek kodama sku288 board";
-+      chassis-type = "tablet";
-       compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
-@@ -14,6 +14,7 @@
- / {
-       model = "MediaTek krane sku0 board";
-+      chassis-type = "tablet";
-       compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
-@@ -14,6 +14,7 @@
- / {
-       model = "MediaTek krane sku176 board";
-+      chassis-type = "tablet";
-       compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
-@@ -7,6 +7,7 @@
- / {
-       model = "MediaTek MT8186 evaluation board";
-+      chassis-type = "embedded";
-       compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
-       aliases {
diff --git a/target/linux/mediatek/patches-6.6/012-v6.5-arm64-dts-mt7986-add-PWM.patch b/target/linux/mediatek/patches-6.6/012-v6.5-arm64-dts-mt7986-add-PWM.patch
deleted file mode 100644 (file)
index e8c4794..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3b92c547e3d4a35c6214b3e7fa1103d0749d83b1 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 21 Apr 2023 15:20:44 +0200
-Subject: [PATCH 12/19] arm64: dts: mt7986: add PWM
-
-This adds pwm node to mt7986.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230421132047.42166-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -240,6 +240,20 @@
-                       status = "disabled";
-               };
-+              pwm: pwm@10048000 {
-+                      compatible = "mediatek,mt7986-pwm";
-+                      reg = <0 0x10048000 0 0x1000>;
-+                      #clock-cells = <1>;
-+                      #pwm-cells = <2>;
-+                      interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&topckgen CLK_TOP_PWM_SEL>,
-+                               <&infracfg CLK_INFRA_PWM_STA>,
-+                               <&infracfg CLK_INFRA_PWM1_CK>,
-+                               <&infracfg CLK_INFRA_PWM2_CK>;
-+                      clock-names = "top", "main", "pwm1", "pwm2";
-+                      status = "disabled";
-+              };
-+
-               uart0: serial@11002000 {
-                       compatible = "mediatek,mt7986-uart",
-                                    "mediatek,mt6577-uart";
diff --git a/target/linux/mediatek/patches-6.6/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch b/target/linux/mediatek/patches-6.6/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch
deleted file mode 100644 (file)
index ce908e3..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-From 35e482bb599df010b4869017ff576dbb7a4d4c2e Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Fri, 21 Apr 2023 15:20:45 +0200
-Subject: [PATCH 13/19] arm64: dts: mt7986: add PWM to BPI-R3
-
-Add pwm node and pinctrl to BananaPi R3 devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230421132047.42166-6-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts   | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -275,6 +275,13 @@
-               };
-       };
-+      pwm_pins: pwm-pins {
-+              mux {
-+                      function = "pwm";
-+                      groups = "pwm0", "pwm1_0";
-+              };
-+      };
-+
-       spi_flash_pins: spi-flash-pins {
-               mux {
-                       function = "spi";
-@@ -345,6 +352,12 @@
-       };
- };
-+&pwm {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&pwm_pins>;
-+      status = "okay";
-+};
-+
- &spi0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi_flash_pins>;
diff --git a/target/linux/mediatek/patches-6.6/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch b/target/linux/mediatek/patches-6.6/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch
deleted file mode 100644 (file)
index c7b3848..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-From ccdda5714446db8690505371442f7807f5d7c6fc Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 5 Feb 2023 18:48:33 +0100
-Subject: [PATCH 14/19] arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3
-
-Leds for Wifi are low-active, so add property to devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230205174833.107050-1-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -460,5 +460,9 @@
-       pinctrl-names = "default", "dbdc";
-       pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
-       pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
-+
-+      led {
-+              led-active-low;
-+      };
- };
diff --git a/target/linux/mediatek/patches-6.6/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch b/target/linux/mediatek/patches-6.6/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch
deleted file mode 100644 (file)
index 0b84f14..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From 1423b4b780adcf3994e63a5988a62d5d1d509bb1 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 28 May 2023 13:33:42 +0200
-Subject: [PATCH 15/19] arm64: dts: mt7986: use size of reserved partition for
- bl2
-
-To store uncompressed bl2 more space is required than partition is
-actually defined.
-
-There is currently no known usage of this reserved partition.
-Openwrt uses same partition layout.
-
-We added same change to u-boot with commit d7bb1099 [1].
-
-[1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
-
-Cc: stable@vger.kernel.org
-Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso     | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-@@ -27,15 +27,10 @@
-                                       partition@0 {
-                                               label = "bl2";
--                                              reg = <0x0 0x20000>;
-+                                              reg = <0x0 0x40000>;
-                                               read-only;
-                                       };
--                                      partition@20000 {
--                                              label = "reserved";
--                                              reg = <0x20000 0x20000>;
--                                      };
--
-                                       partition@40000 {
-                                               label = "u-boot-env";
-                                               reg = <0x40000 0x40000>;
diff --git a/target/linux/mediatek/patches-6.6/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch b/target/linux/mediatek/patches-6.6/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch
deleted file mode 100644 (file)
index 0d12079..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 40a5a767d698ef7a71f8be851ea18b0a7a8b47bd Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:33 +0200
-Subject: [PATCH 16/19] arm64: dts: mt7986: add thermal and efuse
-
-Add thermal related nodes to mt7986 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-3-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 36 ++++++++++++++++++++++-
- 1 file changed, 35 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -337,6 +337,15 @@
-                       status = "disabled";
-               };
-+              auxadc: adc@1100d000 {
-+                      compatible = "mediatek,mt7986-auxadc";
-+                      reg = <0 0x1100d000 0 0x1000>;
-+                      clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
-+                      clock-names = "main";
-+                      #io-channel-cells = <1>;
-+                      status = "disabled";
-+              };
-+
-               ssusb: usb@11200000 {
-                       compatible = "mediatek,mt7986-xhci",
-                                    "mediatek,mtk-xhci";
-@@ -375,6 +384,21 @@
-                       status = "disabled";
-               };
-+              thermal: thermal@1100c800 {
-+                      #thermal-sensor-cells = <1>;
-+                      compatible = "mediatek,mt7986-thermal";
-+                      reg = <0 0x1100c800 0 0x800>;
-+                      interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-+                      clocks = <&infracfg CLK_INFRA_THERM_CK>,
-+                               <&infracfg CLK_INFRA_ADC_26M_CK>,
-+                               <&infracfg CLK_INFRA_ADC_FRC_CK>;
-+                      clock-names = "therm", "auxadc", "adc_32k";
-+                      mediatek,auxadc = <&auxadc>;
-+                      mediatek,apmixedsys = <&apmixedsys>;
-+                      nvmem-cells = <&thermal_calibration>;
-+                      nvmem-cell-names = "calibration-data";
-+              };
-+
-               pcie: pcie@11280000 {
-                       compatible = "mediatek,mt7986-pcie",
-                                    "mediatek,mt8192-pcie";
-@@ -426,6 +450,17 @@
-                       };
-               };
-+              efuse: efuse@11d00000 {
-+                      compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
-+                      reg = <0 0x11d00000 0 0x1000>;
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      thermal_calibration: calib@274 {
-+                              reg = <0x274 0xc>;
-+                      };
-+              };
-+
-               usb_phy: t-phy@11e10000 {
-                       compatible = "mediatek,mt7986-tphy",
-                                    "mediatek,generic-tphy-v2";
-@@ -567,5 +602,4 @@
-                       memory-region = <&wmcpu_emi>;
-               };
-       };
--
- };
diff --git a/target/linux/mediatek/patches-6.6/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch b/target/linux/mediatek/patches-6.6/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch
deleted file mode 100644 (file)
index 3fe3e88..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-From bb78d0cf5117517f1ed296ae71048945d9107675 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:34 +0200
-Subject: [PATCH 17/19] arm64: dts: mt7986: add thermal-zones
-
-Add thermal-zones to mt7986 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-4-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 +++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -602,4 +602,32 @@
-                       memory-region = <&wmcpu_emi>;
-               };
-       };
-+
-+      thermal-zones {
-+              cpu_thermal: cpu-thermal {
-+                      polling-delay-passive = <1000>;
-+                      polling-delay = <1000>;
-+                      thermal-sensors = <&thermal 0>;
-+
-+                      trips {
-+                              cpu_trip_active_high: active-high {
-+                                      temperature = <115000>;
-+                                      hysteresis = <2000>;
-+                                      type = "active";
-+                              };
-+
-+                              cpu_trip_active_low: active-low {
-+                                      temperature = <85000>;
-+                                      hysteresis = <2000>;
-+                                      type = "active";
-+                              };
-+
-+                              cpu_trip_passive: passive {
-+                                      temperature = <40000>;
-+                                      hysteresis = <2000>;
-+                                      type = "passive";
-+                              };
-+                      };
-+              };
-+      };
- };
diff --git a/target/linux/mediatek/patches-6.6/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch b/target/linux/mediatek/patches-6.6/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch
deleted file mode 100644 (file)
index ca7d872..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-From 5d90603b09e5814ffc38c47e79ccf9bc564f9296 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:35 +0200
-Subject: [PATCH 18/19] arm64: dts: mt7986: add pwm-fan and cooling-maps to
- BPI-R3 dts
-
-Add pwm-fan and cooling-maps to BananaPi-R3 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts  | 31 +++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -38,6 +38,15 @@
-               regulator-always-on;
-       };
-+      fan: pwm-fan {
-+              compatible = "pwm-fan";
-+              #cooling-cells = <2>;
-+              /* cooling level (0, 1, 2) - pwm inverted */
-+              cooling-levels = <255 96 0>;
-+              pwms = <&pwm 0 10000 0>;
-+              status = "okay";
-+      };
-+
-       gpio-keys {
-               compatible = "gpio-keys";
-@@ -133,6 +142,28 @@
-       };
- };
-+&cpu_thermal {
-+      cooling-maps {
-+              cpu-active-high {
-+                      /* active: set fan to cooling level 2 */
-+                      cooling-device = <&fan 2 2>;
-+                      trip = <&cpu_trip_active_high>;
-+              };
-+
-+              cpu-active-low {
-+                      /* active: set fan to cooling level 1 */
-+                      cooling-device = <&fan 1 1>;
-+                      trip = <&cpu_trip_active_low>;
-+              };
-+
-+              cpu-passive {
-+                      /* passive: set fan to cooling level 0 */
-+                      cooling-device = <&fan 0 0>;
-+                      trip = <&cpu_trip_passive>;
-+              };
-+      };
-+};
-+
- &crypto {
-       status = "okay";
- };
diff --git a/target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch b/target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch
deleted file mode 100644 (file)
index 9cc6cad..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 6dd3b939370094eb79529683be84500f3c757404 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 6 Jun 2023 16:43:20 +0100
-Subject: [PATCH 19/19] arm64: dts: mt7986: increase bl2 partition on NAND of
- Bananapi R3
-
-The bootrom burned into the MT7986 SoC will try multiple locations on
-the SPI-NAND flash to load bl2 in case the bl2 image located at the the
-previously attempted offset is corrupt.
-
-Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
-allowing for up to four redundant copies of bl2 (typically sized a
-bit less than 0x40000).
-
-Fixes: 8e01fb15b8157 ("arm64: dts: mt7986: add Bananapi R3")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso     | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -29,13 +29,13 @@
-                                       partition@0 {
-                                               label = "bl2";
--                                              reg = <0x0 0x80000>;
-+                                              reg = <0x0 0x100000>;
-                                               read-only;
-                                       };
--                                      partition@80000 {
-+                                      partition@100000 {
-                                               label = "reserved";
--                                              reg = <0x80000 0x300000>;
-+                                              reg = <0x100000 0x280000>;
-                                       };
-                                       partition@380000 {
diff --git a/target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch b/target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch
deleted file mode 100644 (file)
index 5fc5531..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 20:15:53 +0100
-Subject: [PATCH] arm64: dts: mt7622: declare SPI-NAND present on BPI-R64
-
-The SPI-NOR node in the device tree of the BananaPi R64 has most likely
-been copied from the reference board's device tree even though the R64
-comes with an SPI-NAND chip rather than SPI-NOR.
-
-Setup the Serial NAND Flash Interface (SNFI) controller, enable
-hardware BCH error detection and correction engine and add the SPI-NAND
-chip including basic partitions,
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZEA96dmaXqTpk8u8@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 38 ++++++++++++++++---
- 1 file changed, 33 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -253,14 +253,42 @@
-       status = "disabled";
- };
--&nor_flash {
--      pinctrl-names = "default";
--      pinctrl-0 = <&spi_nor_pins>;
--      status = "disabled";
-+&bch {
-+      status = "okay";
-+};
-+&snfi {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&serial_nand_pins>;
-+      status = "okay";
-       flash@0 {
--              compatible = "jedec,spi-nor";
-+              compatible = "spi-nand";
-               reg = <0>;
-+              spi-tx-bus-width = <4>;
-+              spi-rx-bus-width = <4>;
-+              nand-ecc-engine = <&snfi>;
-+              partitions {
-+                      compatible = "fixed-partitions";
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      partition@0 {
-+                              label = "bl2";
-+                              reg = <0x0 0x80000>;
-+                              read-only;
-+                      };
-+
-+                      partition@80000 {
-+                              label = "fip";
-+                              reg = <0x80000 0x200000>;
-+                              read-only;
-+                      };
-+
-+                      ubi: partition@280000 {
-+                              label = "ubi";
-+                              reg = <0x280000 0x7d80000>;
-+                      };
-+              };
-       };
- };
diff --git a/target/linux/mediatek/patches-6.6/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch b/target/linux/mediatek/patches-6.6/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch
deleted file mode 100644 (file)
index 0a971c1..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-From 983f37ee08acb60435744f1b1e2afea2d2a09c48 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 20:16:29 +0100
-Subject: [PATCH] arm64: dts: mt7622: handle interrupts from MT7531 switch on
- BPI-R64
-
-Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
-the mt7530 driver can act as an interrupt controller. Wire up irq line
-of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
-the PHYs of the five 1000Base-T ports doesn't need to be polled any
-more.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZEA-DV_OsmFg5egL@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -154,6 +154,10 @@
-               switch@0 {
-                       compatible = "mediatek,mt7531";
-                       reg = <0>;
-+                      interrupt-controller;
-+                      #interrupt-cells = <1>;
-+                      interrupt-parent = <&pio>;
-+                      interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
-                       reset-gpios = <&pio 54 0>;
-                       ports {
diff --git a/target/linux/mediatek/patches-6.6/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch b/target/linux/mediatek/patches-6.6/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch
deleted file mode 100644 (file)
index 3e16a53..0000000
+++ /dev/null
@@ -1,88 +0,0 @@
-From f76e8bc416bebb0f7b9f57b1247eae945421c0b9 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sat, 8 Oct 2022 18:48:06 +0200
-Subject: [PATCH 1/2] pinctrl: mt7986: allow configuring uart rx/tx and rts/cts
- separately
-
-Some mt7986 boards use uart rts/cts pins as gpio,
-This patch allows to change rts/cts to gpio mode, but keep
-rx/tx as UART function.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Link: https://lore.kernel.org/r/20221008164807.113590-1-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 32 ++++++++++++++++++-----
- 1 file changed, 25 insertions(+), 7 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -675,11 +675,17 @@ static int mt7986_uart1_1_funcs[] = { 4,
- static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
- static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
--static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
--static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
-+static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, };
-+static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, };
--static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
--static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
-+static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, };
-+static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, };
-+
-+static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, };
-+static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, };
-+
-+static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, };
-+static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, };
- static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
- static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
-@@ -708,6 +714,12 @@ static int mt7986_pcie_reset_funcs[] = {
- static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
- static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
-+static int mt7986_uart1_rx_tx_pins[] = { 42, 43, };
-+static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, };
-+
-+static int mt7986_uart1_cts_rts_pins[] = { 44, 45, };
-+static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, };
-+
- static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
- static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
-@@ -749,6 +761,8 @@ static const struct group_desc mt7986_gr
-       PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
-       PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
-       PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
-+      PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx),
-+      PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts),
-       PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
-       PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
-       PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
-@@ -760,8 +774,10 @@ static const struct group_desc mt7986_gr
-       PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
-       PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
-       PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
--      PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
--      PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
-+      PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx),
-+      PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts),
-+      PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx),
-+      PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts),
-       PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
-       PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
-       PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
-@@ -800,7 +816,9 @@ static const char *mt7986_pwm_groups[] =
- static const char *mt7986_spi_groups[] = {
-       "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
- static const char *mt7986_uart_groups[] = {
--      "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
-+      "uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts",
-+      "uart1_2_rx_tx", "uart1_2_cts_rts",
-+      "uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts",
-       "uart2_0", "uart2_1", "uart0", "uart1", "uart2",
- };
- static const char *mt7986_wdt_groups[] = { "watchdog", };
diff --git a/target/linux/mediatek/patches-6.6/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch b/target/linux/mediatek/patches-6.6/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch
deleted file mode 100644 (file)
index 47ded1a..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 822d774abbcc66b811e28c68b59b40b964ba5b46 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:01:13 +0100
-Subject: [PATCH 2/2] pinctrl: mediatek: add pull_type attribute for mediatek
- MT7986 SoC
-
-Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
-add SoC specify 'pull_type' attribute for bias configuration.
-
-This patch add pull_type attribute to pinctrl-mt7986.c, and make
-bias_set_combo and bias_get_combo available to mediatek MT7986 SoC.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106080114.7426-7-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 56 +++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -407,6 +407,60 @@ static const struct mtk_pin_field_calc m
-       PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
- };
-+static const unsigned int mt7986_pull_type[] = {
-+      MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
-+      MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
-+      MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
-+      MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
-+      MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
-+      MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
-+      MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
-+      MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
-+      MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
-+      MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
-+      MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
-+      MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
-+      MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
-+      MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
-+      MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
-+      MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
-+      MTK_PULL_PU_PD_TYPE,/*100*/
-+};
-+
- static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
-       [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
-       [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
-@@ -868,6 +922,7 @@ static struct mtk_pin_soc mt7986a_data =
-       .ies_present = false,
-       .base_names = mt7986_pinctrl_register_base_names,
-       .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+      .pull_type = mt7986_pull_type,
-       .bias_set_combo = mtk_pinconf_bias_set_combo,
-       .bias_get_combo = mtk_pinconf_bias_get_combo,
-       .drive_set = mtk_pinconf_drive_set_rev1,
-@@ -889,6 +944,7 @@ static struct mtk_pin_soc mt7986b_data =
-       .ies_present = false,
-       .base_names = mt7986_pinctrl_register_base_names,
-       .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+      .pull_type = mt7986_pull_type,
-       .bias_set_combo = mtk_pinconf_bias_set_combo,
-       .bias_get_combo = mtk_pinconf_bias_get_combo,
-       .drive_set = mtk_pinconf_drive_set_rev1,
diff --git a/target/linux/mediatek/patches-6.6/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch b/target/linux/mediatek/patches-6.6/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch
deleted file mode 100644 (file)
index 46dfa24..0000000
+++ /dev/null
@@ -1,1094 +0,0 @@
-From 6c83b2d94fcca735cf7d8aa7a55a4957eb404a9d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 00:34:56 +0000
-Subject: [PATCH] pinctrl: add mt7981 pinctrl driver
-
-Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver
-which can also be found the SDK.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/Kconfig          |    5 +
- drivers/pinctrl/mediatek/Makefile         |    1 +
- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 1048 +++++++++++++++++++++
- 3 files changed, 1054 insertions(+)
- create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7981.c
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -127,6 +127,11 @@ config PINCTRL_MT7622
-       default ARM64 && ARCH_MEDIATEK
-       select PINCTRL_MTK_MOORE
-+config PINCTRL_MT7981
-+      bool "Mediatek MT7981 pin control"
-+      depends on OF
-+      select PINCTRL_MTK_MOORE
-+
- config PINCTRL_MT7986
-       bool "Mediatek MT7986 pin control"
-       depends on OF
---- a/drivers/pinctrl/mediatek/Makefile
-+++ b/drivers/pinctrl/mediatek/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-
- obj-$(CONFIG_PINCTRL_MT7622)  += pinctrl-mt7622.o
- obj-$(CONFIG_PINCTRL_MT7623)  += pinctrl-mt7623.o
- obj-$(CONFIG_PINCTRL_MT7629)  += pinctrl-mt7629.o
-+obj-$(CONFIG_PINCTRL_MT7981)  += pinctrl-mt7981.o
- obj-$(CONFIG_PINCTRL_MT7986)  += pinctrl-mt7986.o
- obj-$(CONFIG_PINCTRL_MT8167)  += pinctrl-mt8167.o
- obj-$(CONFIG_PINCTRL_MT8173)  += pinctrl-mt8173.o
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-@@ -0,0 +1,1048 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * The MT7981 driver based on Linux generic pinctrl binding.
-+ *
-+ * Copyright (C) 2020 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ */
-+
-+#include "pinctrl-moore.h"
-+
-+#define MT7981_PIN(_number, _name)                            \
-+      MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
-+
-+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits)   \
-+      PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,      \
-+                     _x_bits, 32, 0)
-+
-+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits)  \
-+      PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,      \
-+                    _x_bits, 32, 1)
-+
-+static const struct mtk_pin_field_calc mt7981_pin_mode_range[] = {
-+      PIN_FIELD(0, 56, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_dir_range[] = {
-+      PIN_FIELD(0, 56, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_di_range[] = {
-+      PIN_FIELD(0, 56, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_do_range[] = {
-+      PIN_FIELD(0, 56, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_ies_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x10, 0x10, 1, 1),
-+      PIN_FIELD_BASE(1, 1, 1, 0x10, 0x10, 0, 1),
-+      PIN_FIELD_BASE(2, 2, 5, 0x20, 0x10, 6, 1),
-+      PIN_FIELD_BASE(3, 3, 4, 0x20, 0x10, 6, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x20, 0x10, 1, 1),
-+      PIN_FIELD_BASE(6, 6, 4, 0x20, 0x10, 3, 1),
-+      PIN_FIELD_BASE(7, 7, 4, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(8, 8, 4, 0x20, 0x10, 4, 1),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x20, 0x10, 9, 1),
-+      PIN_FIELD_BASE(10, 10, 5, 0x20, 0x10, 8, 1),
-+      PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1),
-+      PIN_FIELD_BASE(12, 12, 5, 0x20, 0x10, 7, 1),
-+      PIN_FIELD_BASE(13, 13, 5, 0x20, 0x10, 11, 1),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x20, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(16, 16, 2, 0x20, 0x10, 1, 1),
-+      PIN_FIELD_BASE(17, 17, 2, 0x20, 0x10, 5, 1),
-+      PIN_FIELD_BASE(18, 18, 2, 0x20, 0x10, 4, 1),
-+      PIN_FIELD_BASE(19, 19, 2, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(20, 20, 2, 0x20, 0x10, 3, 1),
-+      PIN_FIELD_BASE(21, 21, 2, 0x20, 0x10, 6, 1),
-+      PIN_FIELD_BASE(22, 22, 2, 0x20, 0x10, 7, 1),
-+      PIN_FIELD_BASE(23, 23, 2, 0x20, 0x10, 10, 1),
-+      PIN_FIELD_BASE(24, 24, 2, 0x20, 0x10, 9, 1),
-+      PIN_FIELD_BASE(25, 25, 2, 0x20, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(27, 27, 5, 0x20, 0x10, 4, 1),
-+      PIN_FIELD_BASE(28, 28, 5, 0x20, 0x10, 3, 1),
-+      PIN_FIELD_BASE(29, 29, 5, 0x20, 0x10, 1, 1),
-+      PIN_FIELD_BASE(30, 30, 5, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(31, 31, 5, 0x20, 0x10, 5, 1),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x10, 0x10, 2, 1),
-+      PIN_FIELD_BASE(33, 33, 1, 0x10, 0x10, 3, 1),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x20, 0x10, 5, 1),
-+      PIN_FIELD_BASE(35, 35, 4, 0x20, 0x10, 7, 1),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x10, 0x10, 2, 1),
-+      PIN_FIELD_BASE(37, 37, 3, 0x10, 0x10, 3, 1),
-+      PIN_FIELD_BASE(38, 38, 3, 0x10, 0x10, 0, 1),
-+      PIN_FIELD_BASE(39, 39, 3, 0x10, 0x10, 1, 1),
-+
-+      PIN_FIELD_BASE(40, 40, 7, 0x30, 0x10, 1, 1),
-+      PIN_FIELD_BASE(41, 41, 7, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(42, 42, 7, 0x30, 0x10, 9, 1),
-+      PIN_FIELD_BASE(43, 43, 7, 0x30, 0x10, 7, 1),
-+      PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1),
-+      PIN_FIELD_BASE(45, 45, 7, 0x30, 0x10, 3, 1),
-+      PIN_FIELD_BASE(46, 46, 7, 0x30, 0x10, 4, 1),
-+      PIN_FIELD_BASE(47, 47, 7, 0x30, 0x10, 5, 1),
-+      PIN_FIELD_BASE(48, 48, 7, 0x30, 0x10, 6, 1),
-+      PIN_FIELD_BASE(49, 49, 7, 0x30, 0x10, 2, 1),
-+
-+      PIN_FIELD_BASE(50, 50, 6, 0x10, 0x10, 0, 1),
-+      PIN_FIELD_BASE(51, 51, 6, 0x10, 0x10, 2, 1),
-+      PIN_FIELD_BASE(52, 52, 6, 0x10, 0x10, 3, 1),
-+      PIN_FIELD_BASE(53, 53, 6, 0x10, 0x10, 4, 1),
-+      PIN_FIELD_BASE(54, 54, 6, 0x10, 0x10, 5, 1),
-+      PIN_FIELD_BASE(55, 55, 6, 0x10, 0x10, 6, 1),
-+      PIN_FIELD_BASE(56, 56, 6, 0x10, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_smt_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x60, 0x10, 1, 1),
-+      PIN_FIELD_BASE(1, 1, 1, 0x60, 0x10, 0, 1),
-+      PIN_FIELD_BASE(2, 2, 5, 0x90, 0x10, 6, 1),
-+      PIN_FIELD_BASE(3, 3, 4, 0x80, 0x10, 6, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x80, 0x10, 2, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x80, 0x10, 1, 1),
-+      PIN_FIELD_BASE(6, 6, 4, 0x80, 0x10, 3, 1),
-+      PIN_FIELD_BASE(7, 7, 4, 0x80, 0x10, 0, 1),
-+      PIN_FIELD_BASE(8, 8, 4, 0x80, 0x10, 4, 1),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x90, 0x10, 9, 1),
-+      PIN_FIELD_BASE(10, 10, 5, 0x90, 0x10, 8, 1),
-+      PIN_FIELD_BASE(11, 11, 5, 0x90, 0x10, 10, 1),
-+      PIN_FIELD_BASE(12, 12, 5, 0x90, 0x10, 7, 1),
-+      PIN_FIELD_BASE(13, 13, 5, 0x90, 0x10, 11, 1),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x80, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x90, 0x10, 0, 1),
-+      PIN_FIELD_BASE(16, 16, 2, 0x90, 0x10, 1, 1),
-+      PIN_FIELD_BASE(17, 17, 2, 0x90, 0x10, 5, 1),
-+      PIN_FIELD_BASE(18, 18, 2, 0x90, 0x10, 4, 1),
-+      PIN_FIELD_BASE(19, 19, 2, 0x90, 0x10, 2, 1),
-+      PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1),
-+      PIN_FIELD_BASE(21, 21, 2, 0x90, 0x10, 6, 1),
-+      PIN_FIELD_BASE(22, 22, 2, 0x90, 0x10, 7, 1),
-+      PIN_FIELD_BASE(23, 23, 2, 0x90, 0x10, 10, 1),
-+      PIN_FIELD_BASE(24, 24, 2, 0x90, 0x10, 9, 1),
-+      PIN_FIELD_BASE(25, 25, 2, 0x90, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x90, 0x10, 0, 1),
-+      PIN_FIELD_BASE(27, 27, 5, 0x90, 0x10, 4, 1),
-+      PIN_FIELD_BASE(28, 28, 5, 0x90, 0x10, 3, 1),
-+      PIN_FIELD_BASE(29, 29, 5, 0x90, 0x10, 1, 1),
-+      PIN_FIELD_BASE(30, 30, 5, 0x90, 0x10, 2, 1),
-+      PIN_FIELD_BASE(31, 31, 5, 0x90, 0x10, 5, 1),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x60, 0x10, 2, 1),
-+      PIN_FIELD_BASE(33, 33, 1, 0x60, 0x10, 3, 1),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x80, 0x10, 5, 1),
-+      PIN_FIELD_BASE(35, 35, 4, 0x80, 0x10, 7, 1),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x60, 0x10, 2, 1),
-+      PIN_FIELD_BASE(37, 37, 3, 0x60, 0x10, 3, 1),
-+      PIN_FIELD_BASE(38, 38, 3, 0x60, 0x10, 0, 1),
-+      PIN_FIELD_BASE(39, 39, 3, 0x60, 0x10, 1, 1),
-+
-+      PIN_FIELD_BASE(40, 40, 7, 0x70, 0x10, 1, 1),
-+      PIN_FIELD_BASE(41, 41, 7, 0x70, 0x10, 0, 1),
-+      PIN_FIELD_BASE(42, 42, 7, 0x70, 0x10, 9, 1),
-+      PIN_FIELD_BASE(43, 43, 7, 0x70, 0x10, 7, 1),
-+      PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1),
-+      PIN_FIELD_BASE(45, 45, 7, 0x70, 0x10, 3, 1),
-+      PIN_FIELD_BASE(46, 46, 7, 0x70, 0x10, 4, 1),
-+      PIN_FIELD_BASE(47, 47, 7, 0x70, 0x10, 5, 1),
-+      PIN_FIELD_BASE(48, 48, 7, 0x70, 0x10, 6, 1),
-+      PIN_FIELD_BASE(49, 49, 7, 0x70, 0x10, 2, 1),
-+
-+      PIN_FIELD_BASE(50, 50, 6, 0x50, 0x10, 0, 1),
-+      PIN_FIELD_BASE(51, 51, 6, 0x50, 0x10, 2, 1),
-+      PIN_FIELD_BASE(52, 52, 6, 0x50, 0x10, 3, 1),
-+      PIN_FIELD_BASE(53, 53, 6, 0x50, 0x10, 4, 1),
-+      PIN_FIELD_BASE(54, 54, 6, 0x50, 0x10, 5, 1),
-+      PIN_FIELD_BASE(55, 55, 6, 0x50, 0x10, 6, 1),
-+      PIN_FIELD_BASE(56, 56, 6, 0x50, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pu_range[] = {
-+      PIN_FIELD_BASE(40, 40, 7, 0x50, 0x10, 1, 1),
-+      PIN_FIELD_BASE(41, 41, 7, 0x50, 0x10, 0, 1),
-+      PIN_FIELD_BASE(42, 42, 7, 0x50, 0x10, 9, 1),
-+      PIN_FIELD_BASE(43, 43, 7, 0x50, 0x10, 7, 1),
-+      PIN_FIELD_BASE(44, 44, 7, 0x50, 0x10, 8, 1),
-+      PIN_FIELD_BASE(45, 45, 7, 0x50, 0x10, 3, 1),
-+      PIN_FIELD_BASE(46, 46, 7, 0x50, 0x10, 4, 1),
-+      PIN_FIELD_BASE(47, 47, 7, 0x50, 0x10, 5, 1),
-+      PIN_FIELD_BASE(48, 48, 7, 0x50, 0x10, 6, 1),
-+      PIN_FIELD_BASE(49, 49, 7, 0x50, 0x10, 2, 1),
-+
-+      PIN_FIELD_BASE(50, 50, 6, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(51, 51, 6, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(52, 52, 6, 0x30, 0x10, 3, 1),
-+      PIN_FIELD_BASE(53, 53, 6, 0x30, 0x10, 4, 1),
-+      PIN_FIELD_BASE(54, 54, 6, 0x30, 0x10, 5, 1),
-+      PIN_FIELD_BASE(55, 55, 6, 0x30, 0x10, 6, 1),
-+      PIN_FIELD_BASE(56, 56, 6, 0x30, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pd_range[] = {
-+      PIN_FIELD_BASE(40, 40, 7, 0x40, 0x10, 1, 1),
-+      PIN_FIELD_BASE(41, 41, 7, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(42, 42, 7, 0x40, 0x10, 9, 1),
-+      PIN_FIELD_BASE(43, 43, 7, 0x40, 0x10, 7, 1),
-+      PIN_FIELD_BASE(44, 44, 7, 0x40, 0x10, 8, 1),
-+      PIN_FIELD_BASE(45, 45, 7, 0x40, 0x10, 3, 1),
-+      PIN_FIELD_BASE(46, 46, 7, 0x40, 0x10, 4, 1),
-+      PIN_FIELD_BASE(47, 47, 7, 0x40, 0x10, 5, 1),
-+      PIN_FIELD_BASE(48, 48, 7, 0x40, 0x10, 6, 1),
-+      PIN_FIELD_BASE(49, 49, 7, 0x40, 0x10, 2, 1),
-+
-+      PIN_FIELD_BASE(50, 50, 6, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(51, 51, 6, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(52, 52, 6, 0x20, 0x10, 3, 1),
-+      PIN_FIELD_BASE(53, 53, 6, 0x20, 0x10, 4, 1),
-+      PIN_FIELD_BASE(54, 54, 6, 0x20, 0x10, 5, 1),
-+      PIN_FIELD_BASE(55, 55, 6, 0x20, 0x10, 6, 1),
-+      PIN_FIELD_BASE(56, 56, 6, 0x20, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_drv_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x00, 0x10, 3, 3),
-+      PIN_FIELD_BASE(1, 1, 1, 0x00, 0x10, 0, 3),
-+
-+      PIN_FIELD_BASE(2, 2, 5, 0x00, 0x10, 18, 3),
-+
-+      PIN_FIELD_BASE(3, 3, 4, 0x00, 0x10, 18, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x00, 0x10, 6, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x00, 0x10, 3, 3),
-+      PIN_FIELD_BASE(6, 6, 4, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(7, 7, 4, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(8, 8, 4, 0x00, 0x10, 12, 3),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x00, 0x10, 27, 3),
-+      PIN_FIELD_BASE(10, 10, 5, 0x00, 0x10, 24, 3),
-+      PIN_FIELD_BASE(11, 11, 5, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(12, 12, 5, 0x00, 0x10, 21, 3),
-+      PIN_FIELD_BASE(13, 13, 5, 0x00, 0x10, 3, 3),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x00, 0x10, 27, 3),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(16, 16, 2, 0x00, 0x10, 3, 3),
-+      PIN_FIELD_BASE(17, 17, 2, 0x00, 0x10, 15, 3),
-+      PIN_FIELD_BASE(18, 18, 2, 0x00, 0x10, 12, 3),
-+      PIN_FIELD_BASE(19, 19, 2, 0x00, 0x10, 6, 3),
-+      PIN_FIELD_BASE(20, 20, 2, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(21, 21, 2, 0x00, 0x10, 18, 3),
-+      PIN_FIELD_BASE(22, 22, 2, 0x00, 0x10, 21, 3),
-+      PIN_FIELD_BASE(23, 23, 2, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(24, 24, 2, 0x00, 0x10, 27, 3),
-+      PIN_FIELD_BASE(25, 25, 2, 0x00, 0x10, 24, 3),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(27, 27, 5, 0x00, 0x10, 12, 3),
-+      PIN_FIELD_BASE(28, 28, 5, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(29, 29, 5, 0x00, 0x10, 3, 3),
-+      PIN_FIELD_BASE(30, 30, 5, 0x00, 0x10, 6, 3),
-+      PIN_FIELD_BASE(31, 31, 5, 0x00, 0x10, 15, 3),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(33, 33, 1, 0x00, 0x10, 12, 3),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x00, 0x10, 15, 3),
-+      PIN_FIELD_BASE(35, 35, 4, 0x00, 0x10, 21, 3),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x00, 0x10, 6, 3),
-+      PIN_FIELD_BASE(37, 37, 3, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(38, 38, 3, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(39, 39, 3, 0x00, 0x10, 3, 3),
-+
-+      PIN_FIELD_BASE(40, 40, 7, 0x00, 0x10, 3, 3),
-+      PIN_FIELD_BASE(41, 41, 7, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(42, 42, 7, 0x00, 0x10, 27, 3),
-+      PIN_FIELD_BASE(43, 43, 7, 0x00, 0x10, 21, 3),
-+      PIN_FIELD_BASE(44, 44, 7, 0x00, 0x10, 24, 3),
-+      PIN_FIELD_BASE(45, 45, 7, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(46, 46, 7, 0x00, 0x10, 12, 3),
-+      PIN_FIELD_BASE(47, 47, 7, 0x00, 0x10, 15, 3),
-+      PIN_FIELD_BASE(48, 48, 7, 0x00, 0x10, 18, 3),
-+      PIN_FIELD_BASE(49, 49, 7, 0x00, 0x10, 6, 3),
-+
-+      PIN_FIELD_BASE(50, 50, 6, 0x00, 0x10, 0, 3),
-+      PIN_FIELD_BASE(51, 51, 6, 0x00, 0x10, 6, 3),
-+      PIN_FIELD_BASE(52, 52, 6, 0x00, 0x10, 9, 3),
-+      PIN_FIELD_BASE(53, 53, 6, 0x00, 0x10, 12, 3),
-+      PIN_FIELD_BASE(54, 54, 6, 0x00, 0x10, 15, 3),
-+      PIN_FIELD_BASE(55, 55, 6, 0x00, 0x10, 18, 3),
-+      PIN_FIELD_BASE(56, 56, 6, 0x00, 0x10, 3, 3),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pupd_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x20, 0x10, 1, 1),
-+      PIN_FIELD_BASE(1, 1, 1, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(2, 2, 5, 0x30, 0x10, 6, 1),
-+      PIN_FIELD_BASE(3, 3, 4, 0x30, 0x10, 6, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x30, 0x10, 1, 1),
-+      PIN_FIELD_BASE(6, 6, 4, 0x30, 0x10, 3, 1),
-+      PIN_FIELD_BASE(7, 7, 4, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(8, 8, 4, 0x30, 0x10, 4, 1),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x30, 0x10, 9, 1),
-+      PIN_FIELD_BASE(10, 10, 5, 0x30, 0x10, 8, 1),
-+      PIN_FIELD_BASE(11, 11, 5, 0x30, 0x10, 10, 1),
-+      PIN_FIELD_BASE(12, 12, 5, 0x30, 0x10, 7, 1),
-+      PIN_FIELD_BASE(13, 13, 5, 0x30, 0x10, 11, 1),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x30, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(16, 16, 2, 0x30, 0x10, 1, 1),
-+      PIN_FIELD_BASE(17, 17, 2, 0x30, 0x10, 5, 1),
-+      PIN_FIELD_BASE(18, 18, 2, 0x30, 0x10, 4, 1),
-+      PIN_FIELD_BASE(19, 19, 2, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1),
-+      PIN_FIELD_BASE(21, 21, 2, 0x30, 0x10, 6, 1),
-+      PIN_FIELD_BASE(22, 22, 2, 0x30, 0x10, 7, 1),
-+      PIN_FIELD_BASE(23, 23, 2, 0x30, 0x10, 10, 1),
-+      PIN_FIELD_BASE(24, 24, 2, 0x30, 0x10, 9, 1),
-+      PIN_FIELD_BASE(25, 25, 2, 0x30, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(27, 27, 5, 0x30, 0x10, 4, 1),
-+      PIN_FIELD_BASE(28, 28, 5, 0x30, 0x10, 3, 1),
-+      PIN_FIELD_BASE(29, 29, 5, 0x30, 0x10, 1, 1),
-+      PIN_FIELD_BASE(30, 30, 5, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(31, 31, 5, 0x30, 0x10, 5, 1),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(33, 33, 1, 0x20, 0x10, 3, 1),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x30, 0x10, 5, 1),
-+      PIN_FIELD_BASE(35, 35, 4, 0x30, 0x10, 7, 1),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x20, 0x10, 2, 1),
-+      PIN_FIELD_BASE(37, 37, 3, 0x20, 0x10, 3, 1),
-+      PIN_FIELD_BASE(38, 38, 3, 0x20, 0x10, 0, 1),
-+      PIN_FIELD_BASE(39, 39, 3, 0x20, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_r0_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x30, 0x10, 1, 1),
-+      PIN_FIELD_BASE(1, 1, 1, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(2, 2, 5, 0x40, 0x10, 6, 1),
-+      PIN_FIELD_BASE(3, 3, 4, 0x40, 0x10, 6, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x40, 0x10, 2, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x40, 0x10, 1, 1),
-+      PIN_FIELD_BASE(6, 6, 4, 0x40, 0x10, 3, 1),
-+      PIN_FIELD_BASE(7, 7, 4, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(8, 8, 4, 0x40, 0x10, 4, 1),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x40, 0x10, 9, 1),
-+      PIN_FIELD_BASE(10, 10, 5, 0x40, 0x10, 8, 1),
-+      PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1),
-+      PIN_FIELD_BASE(12, 12, 5, 0x40, 0x10, 7, 1),
-+      PIN_FIELD_BASE(13, 13, 5, 0x40, 0x10, 11, 1),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x40, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(16, 16, 2, 0x40, 0x10, 1, 1),
-+      PIN_FIELD_BASE(17, 17, 2, 0x40, 0x10, 5, 1),
-+      PIN_FIELD_BASE(18, 18, 2, 0x40, 0x10, 4, 1),
-+      PIN_FIELD_BASE(19, 19, 2, 0x40, 0x10, 2, 1),
-+      PIN_FIELD_BASE(20, 20, 2, 0x40, 0x10, 3, 1),
-+      PIN_FIELD_BASE(21, 21, 2, 0x40, 0x10, 6, 1),
-+      PIN_FIELD_BASE(22, 22, 2, 0x40, 0x10, 7, 1),
-+      PIN_FIELD_BASE(23, 23, 2, 0x40, 0x10, 10, 1),
-+      PIN_FIELD_BASE(24, 24, 2, 0x40, 0x10, 9, 1),
-+      PIN_FIELD_BASE(25, 25, 2, 0x40, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(27, 27, 5, 0x40, 0x10, 4, 1),
-+      PIN_FIELD_BASE(28, 28, 5, 0x40, 0x10, 3, 1),
-+      PIN_FIELD_BASE(29, 29, 5, 0x40, 0x10, 1, 1),
-+      PIN_FIELD_BASE(30, 30, 5, 0x40, 0x10, 2, 1),
-+      PIN_FIELD_BASE(31, 31, 5, 0x40, 0x10, 5, 1),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(33, 33, 1, 0x30, 0x10, 3, 1),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x40, 0x10, 5, 1),
-+      PIN_FIELD_BASE(35, 35, 4, 0x40, 0x10, 7, 1),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x30, 0x10, 2, 1),
-+      PIN_FIELD_BASE(37, 37, 3, 0x30, 0x10, 3, 1),
-+      PIN_FIELD_BASE(38, 38, 3, 0x30, 0x10, 0, 1),
-+      PIN_FIELD_BASE(39, 39, 3, 0x30, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_r1_range[] = {
-+      PIN_FIELD_BASE(0, 0, 1, 0x40, 0x10, 1, 1),
-+      PIN_FIELD_BASE(1, 1, 1, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(2, 2, 5, 0x50, 0x10, 6, 1),
-+      PIN_FIELD_BASE(3, 3, 4, 0x50, 0x10, 6, 1),
-+      PIN_FIELD_BASE(4, 4, 4, 0x50, 0x10, 2, 1),
-+      PIN_FIELD_BASE(5, 5, 4, 0x50, 0x10, 1, 1),
-+      PIN_FIELD_BASE(6, 6, 4, 0x50, 0x10, 3, 1),
-+      PIN_FIELD_BASE(7, 7, 4, 0x50, 0x10, 0, 1),
-+      PIN_FIELD_BASE(8, 8, 4, 0x50, 0x10, 4, 1),
-+
-+      PIN_FIELD_BASE(9, 9, 5, 0x50, 0x10, 9, 1),
-+      PIN_FIELD_BASE(10, 10, 5, 0x50, 0x10, 8, 1),
-+      PIN_FIELD_BASE(11, 11, 5, 0x50, 0x10, 10, 1),
-+      PIN_FIELD_BASE(12, 12, 5, 0x50, 0x10, 7, 1),
-+      PIN_FIELD_BASE(13, 13, 5, 0x50, 0x10, 11, 1),
-+
-+      PIN_FIELD_BASE(14, 14, 4, 0x50, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(15, 15, 2, 0x50, 0x10, 0, 1),
-+      PIN_FIELD_BASE(16, 16, 2, 0x50, 0x10, 1, 1),
-+      PIN_FIELD_BASE(17, 17, 2, 0x50, 0x10, 5, 1),
-+      PIN_FIELD_BASE(18, 18, 2, 0x50, 0x10, 4, 1),
-+      PIN_FIELD_BASE(19, 19, 2, 0x50, 0x10, 2, 1),
-+      PIN_FIELD_BASE(20, 20, 2, 0x50, 0x10, 3, 1),
-+      PIN_FIELD_BASE(21, 21, 2, 0x50, 0x10, 6, 1),
-+      PIN_FIELD_BASE(22, 22, 2, 0x50, 0x10, 7, 1),
-+      PIN_FIELD_BASE(23, 23, 2, 0x50, 0x10, 10, 1),
-+      PIN_FIELD_BASE(24, 24, 2, 0x50, 0x10, 9, 1),
-+      PIN_FIELD_BASE(25, 25, 2, 0x50, 0x10, 8, 1),
-+
-+      PIN_FIELD_BASE(26, 26, 5, 0x50, 0x10, 0, 1),
-+      PIN_FIELD_BASE(27, 27, 5, 0x50, 0x10, 4, 1),
-+      PIN_FIELD_BASE(28, 28, 5, 0x50, 0x10, 3, 1),
-+      PIN_FIELD_BASE(29, 29, 5, 0x50, 0x10, 1, 1),
-+      PIN_FIELD_BASE(30, 30, 5, 0x50, 0x10, 2, 1),
-+      PIN_FIELD_BASE(31, 31, 5, 0x50, 0x10, 5, 1),
-+
-+      PIN_FIELD_BASE(32, 32, 1, 0x40, 0x10, 2, 1),
-+      PIN_FIELD_BASE(33, 33, 1, 0x40, 0x10, 3, 1),
-+
-+      PIN_FIELD_BASE(34, 34, 4, 0x50, 0x10, 5, 1),
-+      PIN_FIELD_BASE(35, 35, 4, 0x50, 0x10, 7, 1),
-+
-+      PIN_FIELD_BASE(36, 36, 3, 0x40, 0x10, 2, 1),
-+      PIN_FIELD_BASE(37, 37, 3, 0x40, 0x10, 3, 1),
-+      PIN_FIELD_BASE(38, 38, 3, 0x40, 0x10, 0, 1),
-+      PIN_FIELD_BASE(39, 39, 3, 0x40, 0x10, 1, 1),
-+};
-+
-+static const unsigned int mt7981_pull_type[] = {
-+      MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
-+      MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
-+      MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
-+      MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
-+      MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
-+      MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
-+      MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
-+      MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
-+      MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
-+      MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
-+      MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
-+      MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
-+      MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
-+      MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
-+      MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
-+      MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
-+      MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
-+      MTK_PULL_PU_PD_TYPE,/*100*/
-+};
-+
-+static const struct mtk_pin_reg_calc mt7981_reg_cals[] = {
-+      [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7981_pin_mode_range),
-+      [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7981_pin_dir_range),
-+      [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7981_pin_di_range),
-+      [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7981_pin_do_range),
-+      [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7981_pin_smt_range),
-+      [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7981_pin_ies_range),
-+      [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7981_pin_pu_range),
-+      [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7981_pin_pd_range),
-+      [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7981_pin_drv_range),
-+      [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7981_pin_pupd_range),
-+      [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7981_pin_r0_range),
-+      [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7981_pin_r1_range),
-+};
-+
-+static const struct mtk_pin_desc mt7981_pins[] = {
-+      MT7981_PIN(0, "GPIO_WPS"),
-+      MT7981_PIN(1, "GPIO_RESET"),
-+      MT7981_PIN(2, "SYS_WATCHDOG"),
-+      MT7981_PIN(3, "PCIE_PERESET_N"),
-+      MT7981_PIN(4, "JTAG_JTDO"),
-+      MT7981_PIN(5, "JTAG_JTDI"),
-+      MT7981_PIN(6, "JTAG_JTMS"),
-+      MT7981_PIN(7, "JTAG_JTCLK"),
-+      MT7981_PIN(8, "JTAG_JTRST_N"),
-+      MT7981_PIN(9, "WO_JTAG_JTDO"),
-+      MT7981_PIN(10, "WO_JTAG_JTDI"),
-+      MT7981_PIN(11, "WO_JTAG_JTMS"),
-+      MT7981_PIN(12, "WO_JTAG_JTCLK"),
-+      MT7981_PIN(13, "WO_JTAG_JTRST_N"),
-+      MT7981_PIN(14, "USB_VBUS"),
-+      MT7981_PIN(15, "PWM0"),
-+      MT7981_PIN(16, "SPI0_CLK"),
-+      MT7981_PIN(17, "SPI0_MOSI"),
-+      MT7981_PIN(18, "SPI0_MISO"),
-+      MT7981_PIN(19, "SPI0_CS"),
-+      MT7981_PIN(20, "SPI0_HOLD"),
-+      MT7981_PIN(21, "SPI0_WP"),
-+      MT7981_PIN(22, "SPI1_CLK"),
-+      MT7981_PIN(23, "SPI1_MOSI"),
-+      MT7981_PIN(24, "SPI1_MISO"),
-+      MT7981_PIN(25, "SPI1_CS"),
-+      MT7981_PIN(26, "SPI2_CLK"),
-+      MT7981_PIN(27, "SPI2_MOSI"),
-+      MT7981_PIN(28, "SPI2_MISO"),
-+      MT7981_PIN(29, "SPI2_CS"),
-+      MT7981_PIN(30, "SPI2_HOLD"),
-+      MT7981_PIN(31, "SPI2_WP"),
-+      MT7981_PIN(32, "UART0_RXD"),
-+      MT7981_PIN(33, "UART0_TXD"),
-+      MT7981_PIN(34, "PCIE_CLK_REQ"),
-+      MT7981_PIN(35, "PCIE_WAKE_N"),
-+      MT7981_PIN(36, "SMI_MDC"),
-+      MT7981_PIN(37, "SMI_MDIO"),
-+      MT7981_PIN(38, "GBE_INT"),
-+      MT7981_PIN(39, "GBE_RESET"),
-+      MT7981_PIN(40, "WF_DIG_RESETB"),
-+      MT7981_PIN(41, "WF_CBA_RESETB"),
-+      MT7981_PIN(42, "WF_XO_REQ"),
-+      MT7981_PIN(43, "WF_TOP_CLK"),
-+      MT7981_PIN(44, "WF_TOP_DATA"),
-+      MT7981_PIN(45, "WF_HB1"),
-+      MT7981_PIN(46, "WF_HB2"),
-+      MT7981_PIN(47, "WF_HB3"),
-+      MT7981_PIN(48, "WF_HB4"),
-+      MT7981_PIN(49, "WF_HB0"),
-+      MT7981_PIN(50, "WF_HB0_B"),
-+      MT7981_PIN(51, "WF_HB5"),
-+      MT7981_PIN(52, "WF_HB6"),
-+      MT7981_PIN(53, "WF_HB7"),
-+      MT7981_PIN(54, "WF_HB8"),
-+      MT7981_PIN(55, "WF_HB9"),
-+      MT7981_PIN(56, "WF_HB10"),
-+};
-+
-+/* List all groups consisting of these pins dedicated to the enablement of
-+ * certain hardware block and the corresponding mode for all of the pins.
-+ * The hardware probably has multiple combinations of these pinouts.
-+ */
-+
-+/* WA_AICE */
-+static int mt7981_wa_aice1_pins[] = { 0, 1, };
-+static int mt7981_wa_aice1_funcs[] = { 2, 2, };
-+
-+static int mt7981_wa_aice2_pins[] = { 0, 1, };
-+static int mt7981_wa_aice2_funcs[] = { 3, 3, };
-+
-+static int mt7981_wa_aice3_pins[] = { 28, 29, };
-+static int mt7981_wa_aice3_funcs[] = { 3, 3, };
-+
-+static int mt7981_wm_aice1_pins[] = { 9, 10, };
-+static int mt7981_wm_aice1_funcs[] = { 2, 2, };
-+
-+static int mt7981_wm_aice2_pins[] = { 30, 31, };
-+static int mt7981_wm_aice2_funcs[] = { 5, 5, };
-+
-+/* WM_UART */
-+static int mt7981_wm_uart_0_pins[] = { 0, 1, };
-+static int mt7981_wm_uart_0_funcs[] = { 5, 5, };
-+
-+static int mt7981_wm_uart_1_pins[] = { 20, 21, };
-+static int mt7981_wm_uart_1_funcs[] = { 4, 4, };
-+
-+static int mt7981_wm_uart_2_pins[] = { 30, 31, };
-+static int mt7981_wm_uart_2_funcs[] = { 3, 3, };
-+
-+/* DFD */
-+static int mt7981_dfd_pins[] = { 0, 1, 4, 5, };
-+static int mt7981_dfd_funcs[] = { 5, 5, 6, 6, };
-+
-+/* SYS_WATCHDOG */
-+static int mt7981_watchdog_pins[] = { 2, };
-+static int mt7981_watchdog_funcs[] = { 1, };
-+
-+static int mt7981_watchdog1_pins[] = { 13, };
-+static int mt7981_watchdog1_funcs[] = { 5, };
-+
-+/* PCIE_PERESET_N */
-+static int mt7981_pcie_pereset_pins[] = { 3, };
-+static int mt7981_pcie_pereset_funcs[] = { 1, };
-+
-+/* JTAG */
-+static int mt7981_jtag_pins[] = { 4, 5, 6, 7, 8, };
-+static int mt7981_jtag_funcs[] = { 1, 1, 1, 1, 1, };
-+
-+/* WM_JTAG */
-+static int mt7981_wm_jtag_0_pins[] = { 4, 5, 6, 7, 8, };
-+static int mt7981_wm_jtag_0_funcs[] = { 2, 2, 2, 2, 2, };
-+
-+static int mt7981_wm_jtag_1_pins[] = { 20, 21, 22, 23, 24, };
-+static int mt7981_wm_jtag_1_funcs[] = { 5, 5, 5, 5, 5, };
-+
-+/* WO0_JTAG */
-+static int mt7981_wo0_jtag_0_pins[] = { 9, 10, 11, 12, 13, };
-+static int mt7981_wo0_jtag_0_funcs[] = { 1, 1, 1, 1, 1, };
-+
-+static int mt7981_wo0_jtag_1_pins[] = { 25, 26, 27, 28, 29, };
-+static int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, };
-+
-+/* UART2 */
-+static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, };
-+static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, };
-+
-+/* GBE_LED0 */
-+static int mt7981_gbe_led0_pins[] = { 8, };
-+static int mt7981_gbe_led0_funcs[] = { 3, };
-+
-+/* PTA_EXT */
-+static int mt7981_pta_ext_0_pins[] = { 4, 5, 6, };
-+static int mt7981_pta_ext_0_funcs[] = { 4, 4, 4, };
-+
-+static int mt7981_pta_ext_1_pins[] = { 22, 23, 24, };
-+static int mt7981_pta_ext_1_funcs[] = { 4, 4, 4, };
-+
-+/* PWM2 */
-+static int mt7981_pwm2_pins[] = { 7, };
-+static int mt7981_pwm2_funcs[] = { 4, };
-+
-+/* NET_WO0_UART_TXD */
-+static int mt7981_net_wo0_uart_txd_0_pins[] = { 8, };
-+static int mt7981_net_wo0_uart_txd_0_funcs[] = { 4, };
-+
-+static int mt7981_net_wo0_uart_txd_1_pins[] = { 14, };
-+static int mt7981_net_wo0_uart_txd_1_funcs[] = { 3, };
-+
-+static int mt7981_net_wo0_uart_txd_2_pins[] = { 15, };
-+static int mt7981_net_wo0_uart_txd_2_funcs[] = { 4, };
-+
-+/* SPI1 */
-+static int mt7981_spi1_0_pins[] = { 4, 5, 6, 7, };
-+static int mt7981_spi1_0_funcs[] = { 5, 5, 5, 5, };
-+
-+/* I2C */
-+static int mt7981_i2c0_0_pins[] = { 6, 7, };
-+static int mt7981_i2c0_0_funcs[] = { 6, 6, };
-+
-+static int mt7981_i2c0_1_pins[] = { 30, 31, };
-+static int mt7981_i2c0_1_funcs[] = { 4, 4, };
-+
-+static int mt7981_i2c0_2_pins[] = { 36, 37, };
-+static int mt7981_i2c0_2_funcs[] = { 2, 2, };
-+
-+static int mt7981_u2_phy_i2c_pins[] = { 30, 31, };
-+static int mt7981_u2_phy_i2c_funcs[] = { 6, 6, };
-+
-+static int mt7981_u3_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_u3_phy_i2c_funcs[] = { 3, 3, };
-+
-+static int mt7981_sgmii1_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_sgmii1_phy_i2c_funcs[] = { 2, 2, };
-+
-+static int mt7981_sgmii0_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_sgmii0_phy_i2c_funcs[] = { 5, 5, };
-+
-+/* DFD_NTRST */
-+static int mt7981_dfd_ntrst_pins[] = { 8, };
-+static int mt7981_dfd_ntrst_funcs[] = { 6, };
-+
-+/* PWM0 */
-+static int mt7981_pwm0_0_pins[] = { 13, };
-+static int mt7981_pwm0_0_funcs[] = { 2, };
-+
-+static int mt7981_pwm0_1_pins[] = { 15, };
-+static int mt7981_pwm0_1_funcs[] = { 1, };
-+
-+/* PWM1 */
-+static int mt7981_pwm1_0_pins[] = { 14, };
-+static int mt7981_pwm1_0_funcs[] = { 2, };
-+
-+static int mt7981_pwm1_1_pins[] = { 15, };
-+static int mt7981_pwm1_1_funcs[] = { 3, };
-+
-+/* GBE_LED1 */
-+static int mt7981_gbe_led1_pins[] = { 13, };
-+static int mt7981_gbe_led1_funcs[] = { 3, };
-+
-+/* PCM */
-+static int mt7981_pcm_pins[] = { 9, 10, 11, 12, 13, 25 };
-+static int mt7981_pcm_funcs[] = { 4, 4, 4, 4, 4, 4, };
-+
-+/* UDI */
-+static int mt7981_udi_pins[] = { 9, 10, 11, 12, 13, };
-+static int mt7981_udi_funcs[] = { 6, 6, 6, 6, 6, };
-+
-+/* DRV_VBUS */
-+static int mt7981_drv_vbus_pins[] = { 14, };
-+static int mt7981_drv_vbus_funcs[] = { 1, };
-+
-+/* EMMC */
-+static int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, };
-+static int mt7981_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
-+
-+/* SNFI */
-+static int mt7981_snfi_pins[] = { 16, 17, 18, 19, 20, 21, };
-+static int mt7981_snfi_funcs[] = { 3, 3, 3, 3, 3, 3, };
-+
-+/* SPI0 */
-+static int mt7981_spi0_pins[] = { 16, 17, 18, 19, };
-+static int mt7981_spi0_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI0 */
-+static int mt7981_spi0_wp_hold_pins[] = { 20, 21, };
-+static int mt7981_spi0_wp_hold_funcs[] = { 1, 1, };
-+
-+/* SPI1 */
-+static int mt7981_spi1_1_pins[] = { 22, 23, 24, 25, };
-+static int mt7981_spi1_1_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI2 */
-+static int mt7981_spi2_pins[] = { 26, 27, 28, 29, };
-+static int mt7981_spi2_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI2 */
-+static int mt7981_spi2_wp_hold_pins[] = { 30, 31, };
-+static int mt7981_spi2_wp_hold_funcs[] = { 1, 1, };
-+
-+/* UART1 */
-+static int mt7981_uart1_0_pins[] = { 16, 17, 18, 19, };
-+static int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, };
-+
-+static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, };
-+static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, };
-+
-+/* UART2 */
-+static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, };
-+static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, };
-+
-+/* UART0 */
-+static int mt7981_uart0_pins[] = { 32, 33, };
-+static int mt7981_uart0_funcs[] = { 1, 1, };
-+
-+/* PCIE_CLK_REQ */
-+static int mt7981_pcie_clk_pins[] = { 34, };
-+static int mt7981_pcie_clk_funcs[] = { 2, };
-+
-+/* PCIE_WAKE_N */
-+static int mt7981_pcie_wake_pins[] = { 35, };
-+static int mt7981_pcie_wake_funcs[] = { 2, };
-+
-+/* MDC_MDIO */
-+static int mt7981_smi_mdc_mdio_pins[] = { 36, 37, };
-+static int mt7981_smi_mdc_mdio_funcs[] = { 1, 1, };
-+
-+static int mt7981_gbe_ext_mdc_mdio_pins[] = { 36, 37, };
-+static int mt7981_gbe_ext_mdc_mdio_funcs[] = { 3, 3, };
-+
-+/* WF0_MODE1 */
-+static int mt7981_wf0_mode1_pins[] = { 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 };
-+static int mt7981_wf0_mode1_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-+
-+/* WF0_MODE3 */
-+static int mt7981_wf0_mode3_pins[] = { 45, 46, 47, 48, 49, 51 };
-+static int mt7981_wf0_mode3_funcs[] = { 2, 2, 2, 2, 2, 2 };
-+
-+/* WF2G_LED */
-+static int mt7981_wf2g_led0_pins[] = { 30, };
-+static int mt7981_wf2g_led0_funcs[] = { 2, };
-+
-+static int mt7981_wf2g_led1_pins[] = { 34, };
-+static int mt7981_wf2g_led1_funcs[] = { 1, };
-+
-+/* WF5G_LED */
-+static int mt7981_wf5g_led0_pins[] = { 31, };
-+static int mt7981_wf5g_led0_funcs[] = { 2, };
-+
-+static int mt7981_wf5g_led1_pins[] = { 35, };
-+static int mt7981_wf5g_led1_funcs[] = { 1, };
-+
-+/* MT7531_INT */
-+static int mt7981_mt7531_int_pins[] = { 38, };
-+static int mt7981_mt7531_int_funcs[] = { 1, };
-+
-+/* ANT_SEL */
-+static int mt7981_ant_sel_pins[] = { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 };
-+static int mt7981_ant_sel_funcs[] = { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 };
-+
-+static const struct group_desc mt7981_groups[] = {
-+      /* @GPIO(0,1): WA_AICE(2) */
-+      PINCTRL_PIN_GROUP("wa_aice1", mt7981_wa_aice1),
-+      /* @GPIO(0,1): WA_AICE(3) */
-+      PINCTRL_PIN_GROUP("wa_aice2", mt7981_wa_aice2),
-+      /* @GPIO(0,1): WM_UART(5) */
-+      PINCTRL_PIN_GROUP("wm_uart_0", mt7981_wm_uart_0),
-+      /* @GPIO(0,1,4,5): DFD(6) */
-+      PINCTRL_PIN_GROUP("dfd", mt7981_dfd),
-+      /* @GPIO(2): SYS_WATCHDOG(1) */
-+      PINCTRL_PIN_GROUP("watchdog", mt7981_watchdog),
-+      /* @GPIO(3): PCIE_PERESET_N(1) */
-+      PINCTRL_PIN_GROUP("pcie_pereset", mt7981_pcie_pereset),
-+      /* @GPIO(4,8) JTAG(1) */
-+      PINCTRL_PIN_GROUP("jtag", mt7981_jtag),
-+      /* @GPIO(4,8) WM_JTAG(2) */
-+      PINCTRL_PIN_GROUP("wm_jtag_0", mt7981_wm_jtag_0),
-+      /* @GPIO(9,13) WO0_JTAG(1) */
-+      PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0),
-+      /* @GPIO(4,7) WM_JTAG(3) */
-+      PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0),
-+      /* @GPIO(8) GBE_LED0(3) */
-+      PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0),
-+      /* @GPIO(4,6) PTA_EXT(4) */
-+      PINCTRL_PIN_GROUP("pta_ext_0", mt7981_pta_ext_0),
-+      /* @GPIO(7) PWM2(4) */
-+      PINCTRL_PIN_GROUP("pwm2", mt7981_pwm2),
-+      /* @GPIO(8) NET_WO0_UART_TXD(4) */
-+      PINCTRL_PIN_GROUP("net_wo0_uart_txd_0", mt7981_net_wo0_uart_txd_0),
-+      /* @GPIO(4,7) SPI1(5) */
-+      PINCTRL_PIN_GROUP("spi1_0", mt7981_spi1_0),
-+      /* @GPIO(6,7) I2C(5) */
-+      PINCTRL_PIN_GROUP("i2c0_0", mt7981_i2c0_0),
-+      /* @GPIO(0,1,4,5): DFD_NTRST(6) */
-+      PINCTRL_PIN_GROUP("dfd_ntrst", mt7981_dfd_ntrst),
-+      /* @GPIO(9,10): WM_AICE(2) */
-+      PINCTRL_PIN_GROUP("wm_aice1", mt7981_wm_aice1),
-+      /* @GPIO(13): PWM0(2) */
-+      PINCTRL_PIN_GROUP("pwm0_0", mt7981_pwm0_0),
-+      /* @GPIO(15): PWM0(1) */
-+      PINCTRL_PIN_GROUP("pwm0_1", mt7981_pwm0_1),
-+      /* @GPIO(14): PWM1(2) */
-+      PINCTRL_PIN_GROUP("pwm1_0", mt7981_pwm1_0),
-+      /* @GPIO(15): PWM1(3) */
-+      PINCTRL_PIN_GROUP("pwm1_1", mt7981_pwm1_1),
-+      /* @GPIO(14) NET_WO0_UART_TXD(3) */
-+      PINCTRL_PIN_GROUP("net_wo0_uart_txd_1", mt7981_net_wo0_uart_txd_1),
-+      /* @GPIO(15) NET_WO0_UART_TXD(4) */
-+      PINCTRL_PIN_GROUP("net_wo0_uart_txd_2", mt7981_net_wo0_uart_txd_2),
-+      /* @GPIO(13) GBE_LED0(3) */
-+      PINCTRL_PIN_GROUP("gbe_led1", mt7981_gbe_led1),
-+      /* @GPIO(9,13) PCM(4) */
-+      PINCTRL_PIN_GROUP("pcm", mt7981_pcm),
-+      /* @GPIO(13): SYS_WATCHDOG1(5) */
-+      PINCTRL_PIN_GROUP("watchdog1", mt7981_watchdog1),
-+      /* @GPIO(9,13) UDI(4) */
-+      PINCTRL_PIN_GROUP("udi", mt7981_udi),
-+      /* @GPIO(14) DRV_VBUS(1) */
-+      PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus),
-+      /* @GPIO(15,25): EMMC(2) */
-+      PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45),
-+      /* @GPIO(16,21): SNFI(3) */
-+      PINCTRL_PIN_GROUP("snfi", mt7981_snfi),
-+      /* @GPIO(16,19): SPI0(1) */
-+      PINCTRL_PIN_GROUP("spi0", mt7981_spi0),
-+      /* @GPIO(20,21): SPI0(1) */
-+      PINCTRL_PIN_GROUP("spi0_wp_hold", mt7981_spi0_wp_hold),
-+      /* @GPIO(22,25) SPI1(1) */
-+      PINCTRL_PIN_GROUP("spi1_1", mt7981_spi1_1),
-+      /* @GPIO(26,29): SPI2(1) */
-+      PINCTRL_PIN_GROUP("spi2", mt7981_spi2),
-+      /* @GPIO(30,31): SPI0(1) */
-+      PINCTRL_PIN_GROUP("spi2_wp_hold", mt7981_spi2_wp_hold),
-+      /* @GPIO(16,19): UART1(4) */
-+      PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0),
-+      /* @GPIO(26,29): UART1(2) */
-+      PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1),
-+      /* @GPIO(22,25): UART1(3) */
-+      PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1),
-+      /* @GPIO(22,24) PTA_EXT(4) */
-+      PINCTRL_PIN_GROUP("pta_ext_1", mt7981_pta_ext_1),
-+      /* @GPIO(20,21): WM_UART(4) */
-+      PINCTRL_PIN_GROUP("wm_aurt_1", mt7981_wm_uart_1),
-+      /* @GPIO(30,31): WM_UART(3) */
-+      PINCTRL_PIN_GROUP("wm_aurt_2", mt7981_wm_uart_2),
-+      /* @GPIO(20,24) WM_JTAG(5) */
-+      PINCTRL_PIN_GROUP("wm_jtag_1", mt7981_wm_jtag_1),
-+      /* @GPIO(25,29) WO0_JTAG(5) */
-+      PINCTRL_PIN_GROUP("wo0_jtag_1", mt7981_wo0_jtag_1),
-+      /* @GPIO(28,29): WA_AICE(3) */
-+      PINCTRL_PIN_GROUP("wa_aice3", mt7981_wa_aice3),
-+      /* @GPIO(30,31): WM_AICE(5) */
-+      PINCTRL_PIN_GROUP("wm_aice2", mt7981_wm_aice2),
-+      /* @GPIO(30,31): I2C(4) */
-+      PINCTRL_PIN_GROUP("i2c0_1", mt7981_i2c0_1),
-+      /* @GPIO(30,31): I2C(6) */
-+      PINCTRL_PIN_GROUP("u2_phy_i2c", mt7981_u2_phy_i2c),
-+      /* @GPIO(32,33): I2C(1) */
-+      PINCTRL_PIN_GROUP("uart0", mt7981_uart0),
-+      /* @GPIO(32,33): I2C(2) */
-+      PINCTRL_PIN_GROUP("sgmii1_phy_i2c", mt7981_sgmii1_phy_i2c),
-+      /* @GPIO(32,33): I2C(3) */
-+      PINCTRL_PIN_GROUP("u3_phy_i2c", mt7981_u3_phy_i2c),
-+      /* @GPIO(32,33): I2C(5) */
-+      PINCTRL_PIN_GROUP("sgmii0_phy_i2c", mt7981_sgmii0_phy_i2c),
-+      /* @GPIO(34): PCIE_CLK_REQ(2) */
-+      PINCTRL_PIN_GROUP("pcie_clk", mt7981_pcie_clk),
-+      /* @GPIO(35): PCIE_WAKE_N(2) */
-+      PINCTRL_PIN_GROUP("pcie_wake", mt7981_pcie_wake),
-+      /* @GPIO(36,37): I2C(2) */
-+      PINCTRL_PIN_GROUP("i2c0_2", mt7981_i2c0_2),
-+      /* @GPIO(36,37): MDC_MDIO(1) */
-+      PINCTRL_PIN_GROUP("smi_mdc_mdio", mt7981_smi_mdc_mdio),
-+      /* @GPIO(36,37): MDC_MDIO(3) */
-+      PINCTRL_PIN_GROUP("gbe_ext_mdc_mdio", mt7981_gbe_ext_mdc_mdio),
-+      /* @GPIO(69,85): WF0_MODE1(1) */
-+      PINCTRL_PIN_GROUP("wf0_mode1", mt7981_wf0_mode1),
-+      /* @GPIO(74,80): WF0_MODE3(3) */
-+      PINCTRL_PIN_GROUP("wf0_mode3", mt7981_wf0_mode3),
-+      /* @GPIO(30): WF2G_LED(2) */
-+      PINCTRL_PIN_GROUP("wf2g_led0", mt7981_wf2g_led0),
-+      /* @GPIO(34): WF2G_LED(1) */
-+      PINCTRL_PIN_GROUP("wf2g_led1", mt7981_wf2g_led1),
-+      /* @GPIO(31): WF5G_LED(2) */
-+      PINCTRL_PIN_GROUP("wf5g_led0", mt7981_wf5g_led0),
-+      /* @GPIO(35): WF5G_LED(1) */
-+      PINCTRL_PIN_GROUP("wf5g_led1", mt7981_wf5g_led1),
-+      /* @GPIO(38): MT7531_INT(1) */
-+      PINCTRL_PIN_GROUP("mt7531_int", mt7981_mt7531_int),
-+      /* @GPIO(14,15,26,17,18,19,20,21,22,23,24,25,34,35): ANT_SEL(1) */
-+      PINCTRL_PIN_GROUP("ant_sel", mt7981_ant_sel),
-+};
-+
-+/* Joint those groups owning the same capability in user point of view which
-+ * allows that people tend to use through the device tree.
-+ */
-+static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1",
-+      "wa_aice3", "wm_aice1_2", };
-+static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0",
-+      "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2",
-+      "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", };
-+static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", };
-+static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", };
-+static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", };
-+static const char *mt7981_jtag_groups[] = { "jtag", "wm_jtag_0", "wo0_jtag_0",
-+      "wo0_jtag_1", "wm_jtag_1", };
-+static const char *mt7981_led_groups[] = { "gbe_led0", "gbe_led1", "wf2g_led0",
-+      "wf2g_led1", "wf5g_led0", "wf5g_led1", };
-+static const char *mt7981_pta_groups[] = { "pta_ext_0", "pta_ext_1", };
-+static const char *mt7981_pwm_groups[] = { "pwm2", "pwm0_0", "pwm0_1",
-+      "pwm1_0", "pwm1_1", };
-+static const char *mt7981_spi_groups[] = { "spi1_0", "spi0", "spi0_wp_hold", "spi1_1", "spi2",
-+      "spi2_wp_hold", };
-+static const char *mt7981_i2c_groups[] = { "i2c0_0", "i2c0_1", "u2_phy_i2c",
-+      "sgmii1_phy_i2c", "u3_phy_i2c", "sgmii0_phy_i2c", "i2c0_2", };
-+static const char *mt7981_pcm_groups[] = { "pcm", };
-+static const char *mt7981_udi_groups[] = { "udi", };
-+static const char *mt7981_usb_groups[] = { "drv_vbus", };
-+static const char *mt7981_flash_groups[] = { "emmc_45", "snfi", };
-+static const char *mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio",
-+      "wf0_mode1", "wf0_mode3", "mt7531_int", };
-+static const char *mt7981_ant_groups[] = { "ant_sel", };
-+
-+static const struct function_desc mt7981_functions[] = {
-+      {"wa_aice",     mt7981_wa_aice_groups, ARRAY_SIZE(mt7981_wa_aice_groups)},
-+      {"dfd", mt7981_dfd_groups, ARRAY_SIZE(mt7981_dfd_groups)},
-+      {"jtag", mt7981_jtag_groups, ARRAY_SIZE(mt7981_jtag_groups)},
-+      {"pta", mt7981_pta_groups, ARRAY_SIZE(mt7981_pta_groups)},
-+      {"pcm", mt7981_pcm_groups, ARRAY_SIZE(mt7981_pcm_groups)},
-+      {"udi", mt7981_udi_groups, ARRAY_SIZE(mt7981_udi_groups)},
-+      {"usb", mt7981_usb_groups, ARRAY_SIZE(mt7981_usb_groups)},
-+      {"ant", mt7981_ant_groups, ARRAY_SIZE(mt7981_ant_groups)},
-+      {"eth", mt7981_ethernet_groups, ARRAY_SIZE(mt7981_ethernet_groups)},
-+      {"i2c", mt7981_i2c_groups, ARRAY_SIZE(mt7981_i2c_groups)},
-+      {"led", mt7981_led_groups, ARRAY_SIZE(mt7981_led_groups)},
-+      {"pwm", mt7981_pwm_groups, ARRAY_SIZE(mt7981_pwm_groups)},
-+      {"spi", mt7981_spi_groups, ARRAY_SIZE(mt7981_spi_groups)},
-+      {"uart", mt7981_uart_groups, ARRAY_SIZE(mt7981_uart_groups)},
-+      {"watchdog", mt7981_wdt_groups, ARRAY_SIZE(mt7981_wdt_groups)},
-+      {"flash", mt7981_flash_groups, ARRAY_SIZE(mt7981_flash_groups)},
-+      {"pcie", mt7981_pcie_groups, ARRAY_SIZE(mt7981_pcie_groups)},
-+};
-+
-+static const struct mtk_eint_hw mt7981_eint_hw = {
-+      .port_mask = 7,
-+      .ports     = 7,
-+      .ap_num    = ARRAY_SIZE(mt7981_pins),
-+      .db_cnt    = 16,
-+};
-+
-+static const char * const mt7981_pinctrl_register_base_names[] = {
-+      "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb",
-+      "iocfg_lb", "iocfg_bl", "iocfg_tm", "iocfg_tl",
-+};
-+
-+static struct mtk_pin_soc mt7981_data = {
-+      .reg_cal = mt7981_reg_cals,
-+      .pins = mt7981_pins,
-+      .npins = ARRAY_SIZE(mt7981_pins),
-+      .grps = mt7981_groups,
-+      .ngrps = ARRAY_SIZE(mt7981_groups),
-+      .funcs = mt7981_functions,
-+      .nfuncs = ARRAY_SIZE(mt7981_functions),
-+      .eint_hw = &mt7981_eint_hw,
-+      .gpio_m = 0,
-+      .ies_present = false,
-+      .base_names = mt7981_pinctrl_register_base_names,
-+      .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names),
-+      .pull_type = mt7981_pull_type,
-+      .bias_set_combo = mtk_pinconf_bias_set_combo,
-+      .bias_get_combo = mtk_pinconf_bias_get_combo,
-+      .drive_set = mtk_pinconf_drive_set_rev1,
-+      .drive_get = mtk_pinconf_drive_get_rev1,
-+      .adv_pull_get = mtk_pinconf_adv_pull_get,
-+      .adv_pull_set = mtk_pinconf_adv_pull_set,
-+};
-+
-+static const struct of_device_id mt7981_pinctrl_of_match[] = {
-+      { .compatible = "mediatek,mt7981-pinctrl", },
-+      {}
-+};
-+
-+static int mt7981_pinctrl_probe(struct platform_device *pdev)
-+{
-+      return mtk_moore_pinctrl_probe(pdev, &mt7981_data);
-+}
-+
-+static struct platform_driver mt7981_pinctrl_driver = {
-+      .driver = {
-+              .name = "mt7981-pinctrl",
-+              .of_match_table = mt7981_pinctrl_of_match,
-+      },
-+      .probe = mt7981_pinctrl_probe,
-+};
-+
-+static int __init mt7981_pinctrl_init(void)
-+{
-+      return platform_driver_register(&mt7981_pinctrl_driver);
-+}
-+arch_initcall(mt7981_pinctrl_init);
diff --git a/target/linux/mediatek/patches-6.6/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch b/target/linux/mediatek/patches-6.6/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch
deleted file mode 100644 (file)
index 995e0dc..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From c0ad453e94e5c404efbcf668648d07eaa1a71ed7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sat, 18 Feb 2023 09:51:06 +0300
-Subject: [PATCH] pinctrl: mediatek: add missing options to PINCTRL_MT7981
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are options missing from PINCTRL_MT7981 whilst being on every other
-pin controller. Add them.
-
-Signed-off-by: Arınç ÃœNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -130,6 +130,8 @@ config PINCTRL_MT7622
- config PINCTRL_MT7981
-       bool "Mediatek MT7981 pin control"
-       depends on OF
-+      depends on ARM64 || COMPILE_TEST
-+      default ARM64 && ARCH_MEDIATEK
-       select PINCTRL_MTK_MOORE
- config PINCTRL_MT7986
diff --git a/target/linux/mediatek/patches-6.6/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch b/target/linux/mediatek/patches-6.6/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch
deleted file mode 100644 (file)
index db25616..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-From 8f6f16fe1553ce63edfb98a39ef9d4754a0c39bf Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 18 Aug 2023 04:02:35 +0100
-Subject: [PATCH] pinctrl: mediatek: fix pull_type data for MT7981
-
-MediaTek has released pull_type data for MT7981 in their SDK.
-Use it and set functions to configure pin bias.
-
-Fixes: 6c83b2d94fcc ("pinctrl: add mt7981 pinctrl driver")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/7bcc8ead25dbfabc7f5a85d066224a926fbb4941.1692327317.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 44 +++++++----------------
- 1 file changed, 13 insertions(+), 31 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-@@ -457,37 +457,15 @@ static const unsigned int mt7981_pull_ty
-       MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
-       MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
-       MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
--      MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
--      MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
--      MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
--      MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
--      MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
--      MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
--      MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
--      MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
--      MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
--      MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
--      MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
--      MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
--      MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
--      MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
--      MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
--      MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
--      MTK_PULL_PU_PD_TYPE,/*100*/
-+      MTK_PULL_PU_PD_TYPE,/*40*/ MTK_PULL_PU_PD_TYPE,/*41*/
-+      MTK_PULL_PU_PD_TYPE,/*42*/ MTK_PULL_PU_PD_TYPE,/*43*/
-+      MTK_PULL_PU_PD_TYPE,/*44*/ MTK_PULL_PU_PD_TYPE,/*45*/
-+      MTK_PULL_PU_PD_TYPE,/*46*/ MTK_PULL_PU_PD_TYPE,/*47*/
-+      MTK_PULL_PU_PD_TYPE,/*48*/ MTK_PULL_PU_PD_TYPE,/*49*/
-+      MTK_PULL_PU_PD_TYPE,/*50*/ MTK_PULL_PU_PD_TYPE,/*51*/
-+      MTK_PULL_PU_PD_TYPE,/*52*/ MTK_PULL_PU_PD_TYPE,/*53*/
-+      MTK_PULL_PU_PD_TYPE,/*54*/ MTK_PULL_PU_PD_TYPE,/*55*/
-+      MTK_PULL_PU_PD_TYPE,/*56*/
- };
- static const struct mtk_pin_reg_calc mt7981_reg_cals[] = {
-@@ -1014,6 +992,10 @@ static struct mtk_pin_soc mt7981_data =
-       .ies_present = false,
-       .base_names = mt7981_pinctrl_register_base_names,
-       .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names),
-+      .bias_disable_set = mtk_pinconf_bias_disable_set,
-+      .bias_disable_get = mtk_pinconf_bias_disable_get,
-+      .bias_set = mtk_pinconf_bias_set,
-+      .bias_get = mtk_pinconf_bias_get,
-       .pull_type = mt7981_pull_type,
-       .bias_set_combo = mtk_pinconf_bias_set_combo,
-       .bias_get_combo = mtk_pinconf_bias_get_combo,
diff --git a/target/linux/mediatek/patches-6.6/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch b/target/linux/mediatek/patches-6.6/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch
deleted file mode 100644 (file)
index 7992a02..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 0d8387fba9f151220e48dc3dcdc2335539708f13 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 18 Aug 2023 04:03:26 +0100
-Subject: [PATCH] pinctrl: mediatek: assign functions to configure pin bias on
- MT7986
-
-Assign bias_disable_get/set and bias_get/set functions to allow
-configuring pin bias on MT7986.
-
-Fixes: 2c58d8dc9cd0 ("pinctrl: mediatek: add pull_type attribute for mediatek MT7986 SoC")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/47f72372354312a839b9337e09476aadcc206e8b.1692327317.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -922,6 +922,10 @@ static struct mtk_pin_soc mt7986a_data =
-       .ies_present = false,
-       .base_names = mt7986_pinctrl_register_base_names,
-       .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+      .bias_disable_set = mtk_pinconf_bias_disable_set,
-+      .bias_disable_get = mtk_pinconf_bias_disable_get,
-+      .bias_set = mtk_pinconf_bias_set,
-+      .bias_get = mtk_pinconf_bias_get,
-       .pull_type = mt7986_pull_type,
-       .bias_set_combo = mtk_pinconf_bias_set_combo,
-       .bias_get_combo = mtk_pinconf_bias_get_combo,
-@@ -944,6 +948,10 @@ static struct mtk_pin_soc mt7986b_data =
-       .ies_present = false,
-       .base_names = mt7986_pinctrl_register_base_names,
-       .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+      .bias_disable_set = mtk_pinconf_bias_disable_set,
-+      .bias_disable_get = mtk_pinconf_bias_disable_get,
-+      .bias_set = mtk_pinconf_bias_set,
-+      .bias_get = mtk_pinconf_bias_get,
-       .pull_type = mt7986_pull_type,
-       .bias_set_combo = mtk_pinconf_bias_set_combo,
-       .bias_get_combo = mtk_pinconf_bias_get_combo,
diff --git a/target/linux/mediatek/patches-6.6/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch b/target/linux/mediatek/patches-6.6/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch
deleted file mode 100644 (file)
index af5715e..0000000
+++ /dev/null
@@ -1,536 +0,0 @@
-From fe5c8d03f3de89ae058e365b783f8c1314f47490 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:33 +0100
-Subject: [PATCH 01/15] clk: mediatek: clk-gate: Propagate struct device with
- mtk_clk_register_gates()
-
-Commit e4c23e19aa2a ("clk: mediatek: Register clock gate with device")
-introduces a helper function for the sole purpose of propagating a
-struct device pointer to the clk API when registering the mtk-gate
-clocks to take advantage of Runtime PM when/where needed and where
-a power domain is defined in devicetree.
-
-Function mtk_clk_register_gates() then becomes a wrapper around the
-new mtk_clk_register_gates_with_dev() function that will simply pass
-NULL as struct device: this is essential when registering drivers
-with CLK_OF_DECLARE instead of as a platform device, as there will
-be no struct device to pass... but we can as well simply have only
-one function that always takes such pointer as a param and pass NULL
-when unavoidable.
-
-This commit removes the mtk_clk_register_gates() wrapper and renames
-mtk_clk_register_gates_with_dev() to the former and all of the calls
-to either of the two functions were fixed in all drivers in order to
-reflect this change; also, to improve consistency with other kernel
-functions, the pointer to struct device was moved as the first param.
-
-Since a lot of MediaTek clock drivers are actually registering as a
-platform device, but were still registering the mtk-gate clocks
-without passing any struct device to the clock framework, they've
-been changed to pass a valid one now, as to make all those platforms
-able to use runtime power management where available.
-
-While at it, some much needed indentation changes were also done.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-4-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: dropped parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-gate.c            | 23 +++++++---------------
- drivers/clk/mediatek/clk-gate.h            |  7 +------
- drivers/clk/mediatek/clk-mt2701-aud.c      |  4 ++--
- drivers/clk/mediatek/clk-mt2701-eth.c      |  4 ++--
- drivers/clk/mediatek/clk-mt2701-g3d.c      |  2 +-
- drivers/clk/mediatek/clk-mt2701-hif.c      |  4 ++--
- drivers/clk/mediatek/clk-mt2701-mm.c       |  4 ++--
- drivers/clk/mediatek/clk-mt2701.c          | 12 +++++------
- drivers/clk/mediatek/clk-mt2712-mm.c       |  4 ++--
- drivers/clk/mediatek/clk-mt2712.c          | 12 +++++------
- drivers/clk/mediatek/clk-mt7622-aud.c      |  4 ++--
- drivers/clk/mediatek/clk-mt7622-eth.c      |  8 ++++----
- drivers/clk/mediatek/clk-mt7622-hif.c      |  8 ++++----
- drivers/clk/mediatek/clk-mt7622.c          | 14 ++++++-------
- drivers/clk/mediatek/clk-mt7629-eth.c      |  7 ++++---
- drivers/clk/mediatek/clk-mt7629-hif.c      |  8 ++++----
- drivers/clk/mediatek/clk-mt7629.c          | 10 +++++-----
- drivers/clk/mediatek/clk-mt7986-eth.c      | 10 +++++-----
- drivers/clk/mediatek/clk-mt7986-infracfg.c |  4 ++--
- 19 files changed, 68 insertions(+), 81 deletions(-)
-
---- a/drivers/clk/mediatek/clk-gate.c
-+++ b/drivers/clk/mediatek/clk-gate.c
-@@ -152,12 +152,12 @@ const struct clk_ops mtk_clk_gate_ops_no
- };
- EXPORT_SYMBOL_GPL(mtk_clk_gate_ops_no_setclr_inv);
--static struct clk_hw *mtk_clk_register_gate(const char *name,
-+static struct clk_hw *mtk_clk_register_gate(struct device *dev, const char *name,
-                                        const char *parent_name,
-                                        struct regmap *regmap, int set_ofs,
-                                        int clr_ofs, int sta_ofs, u8 bit,
-                                        const struct clk_ops *ops,
--                                       unsigned long flags, struct device *dev)
-+                                       unsigned long flags)
- {
-       struct mtk_clk_gate *cg;
-       int ret;
-@@ -202,10 +202,9 @@ static void mtk_clk_unregister_gate(stru
-       kfree(cg);
- }
--int mtk_clk_register_gates_with_dev(struct device_node *node,
--                                  const struct mtk_gate *clks, int num,
--                                  struct clk_hw_onecell_data *clk_data,
--                                  struct device *dev)
-+int mtk_clk_register_gates(struct device *dev, struct device_node *node,
-+                         const struct mtk_gate *clks, int num,
-+                         struct clk_hw_onecell_data *clk_data)
- {
-       int i;
-       struct clk_hw *hw;
-@@ -229,13 +228,13 @@ int mtk_clk_register_gates_with_dev(stru
-                       continue;
-               }
--              hw = mtk_clk_register_gate(gate->name, gate->parent_name,
-+              hw = mtk_clk_register_gate(dev, gate->name, gate->parent_name,
-                                           regmap,
-                                           gate->regs->set_ofs,
-                                           gate->regs->clr_ofs,
-                                           gate->regs->sta_ofs,
-                                           gate->shift, gate->ops,
--                                          gate->flags, dev);
-+                                          gate->flags);
-               if (IS_ERR(hw)) {
-                       pr_err("Failed to register clk %s: %pe\n", gate->name,
-@@ -261,14 +260,6 @@ err:
-       return PTR_ERR(hw);
- }
--EXPORT_SYMBOL_GPL(mtk_clk_register_gates_with_dev);
--
--int mtk_clk_register_gates(struct device_node *node,
--                         const struct mtk_gate *clks, int num,
--                         struct clk_hw_onecell_data *clk_data)
--{
--      return mtk_clk_register_gates_with_dev(node, clks, num, clk_data, NULL);
--}
- EXPORT_SYMBOL_GPL(mtk_clk_register_gates);
- void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
---- a/drivers/clk/mediatek/clk-gate.h
-+++ b/drivers/clk/mediatek/clk-gate.h
-@@ -50,15 +50,10 @@ struct mtk_gate {
- #define GATE_MTK(_id, _name, _parent, _regs, _shift, _ops)            \
-       GATE_MTK_FLAGS(_id, _name, _parent, _regs, _shift, _ops, 0)
--int mtk_clk_register_gates(struct device_node *node,
-+int mtk_clk_register_gates(struct device *dev, struct device_node *node,
-                          const struct mtk_gate *clks, int num,
-                          struct clk_hw_onecell_data *clk_data);
--int mtk_clk_register_gates_with_dev(struct device_node *node,
--                                  const struct mtk_gate *clks, int num,
--                                  struct clk_hw_onecell_data *clk_data,
--                                  struct device *dev);
--
- void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
-                             struct clk_hw_onecell_data *clk_data);
---- a/drivers/clk/mediatek/clk-mt2701-aud.c
-+++ b/drivers/clk/mediatek/clk-mt2701-aud.c
-@@ -127,8 +127,8 @@ static int clk_mt2701_aud_probe(struct p
-       clk_data = mtk_alloc_clk_data(CLK_AUD_NR);
--      mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-+                             ARRAY_SIZE(audio_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
---- a/drivers/clk/mediatek/clk-mt2701-eth.c
-+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
-@@ -51,8 +51,8 @@ static int clk_mt2701_eth_probe(struct p
-       clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
--      mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
--                                              clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+                             ARRAY_SIZE(eth_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt2701-g3d.c
-+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
-@@ -45,7 +45,7 @@ static int clk_mt2701_g3dsys_init(struct
-       clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
--      mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks),
-+      mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks),
-                              clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt2701-hif.c
-+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
-@@ -48,8 +48,8 @@ static int clk_mt2701_hif_probe(struct p
-       clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
--      mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks),
--                                              clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, hif_clks,
-+                             ARRAY_SIZE(hif_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
---- a/drivers/clk/mediatek/clk-mt2701-mm.c
-+++ b/drivers/clk/mediatek/clk-mt2701-mm.c
-@@ -76,8 +76,8 @@ static int clk_mt2701_mm_probe(struct pl
-       clk_data = mtk_alloc_clk_data(CLK_MM_NR);
--      mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
--                                              clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, mm_clks,
-+                             ARRAY_SIZE(mm_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -685,8 +685,8 @@ static int mtk_topckgen_init(struct plat
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
-                               base, &mt2701_clk_lock, clk_data);
--      mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
--                                              clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+                             ARRAY_SIZE(top_clks), clk_data);
-       return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- }
-@@ -789,8 +789,8 @@ static int mtk_infrasys_init(struct plat
-               }
-       }
--      mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
--                                              infra_clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+                             ARRAY_SIZE(infra_clks), infra_clk_data);
-       mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
-                                               infra_clk_data);
-@@ -902,8 +902,8 @@ static int mtk_pericfg_init(struct platf
-       if (!clk_data)
-               return -ENOMEM;
--      mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
--                                              clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+                             ARRAY_SIZE(peri_clks), clk_data);
-       mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
-                       &mt2701_clk_lock, clk_data);
---- a/drivers/clk/mediatek/clk-mt2712-mm.c
-+++ b/drivers/clk/mediatek/clk-mt2712-mm.c
-@@ -117,8 +117,8 @@ static int clk_mt2712_mm_probe(struct pl
-       clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
--      mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
--                      clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, mm_clks,
-+                             ARRAY_SIZE(mm_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1324,8 +1324,8 @@ static int clk_mt2712_top_probe(struct p
-                       &mt2712_clk_lock, top_clk_data);
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
-                       &mt2712_clk_lock, top_clk_data);
--      mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
--                      top_clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+                             ARRAY_SIZE(top_clks), top_clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, top_clk_data);
-@@ -1344,8 +1344,8 @@ static int clk_mt2712_infra_probe(struct
-       clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
--      mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
--                      clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+                             ARRAY_SIZE(infra_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-@@ -1366,8 +1366,8 @@ static int clk_mt2712_peri_probe(struct
-       clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
--      mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
--                      clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+                             ARRAY_SIZE(peri_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -114,8 +114,8 @@ static int clk_mt7622_audiosys_init(stru
-       clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
--      mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-+                             ARRAY_SIZE(audio_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
---- a/drivers/clk/mediatek/clk-mt7622-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7622-eth.c
-@@ -69,8 +69,8 @@ static int clk_mt7622_ethsys_init(struct
-       clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
--      mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+                             ARRAY_SIZE(eth_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -91,8 +91,8 @@ static int clk_mt7622_sgmiisys_init(stru
-       clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
--      mtk_clk_register_gates(node, sgmii_clks, ARRAY_SIZE(sgmii_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, sgmii_clks,
-+                             ARRAY_SIZE(sgmii_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt7622-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7622-hif.c
-@@ -80,8 +80,8 @@ static int clk_mt7622_ssusbsys_init(stru
-       clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--      mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-+                             ARRAY_SIZE(ssusb_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -102,8 +102,8 @@ static int clk_mt7622_pciesys_init(struc
-       clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--      mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-+                             ARRAY_SIZE(pcie_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -621,8 +621,8 @@ static int mtk_topckgen_init(struct plat
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
-                                 base, &mt7622_clk_lock, clk_data);
--      mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+                             ARRAY_SIZE(top_clks), clk_data);
-       return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- }
-@@ -635,8 +635,8 @@ static int mtk_infrasys_init(struct plat
-       clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
--      mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+                             ARRAY_SIZE(infra_clks), clk_data);
-       mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-                                 clk_data);
-@@ -663,7 +663,7 @@ static int mtk_apmixedsys_init(struct pl
-       mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
-                             clk_data);
--      mtk_clk_register_gates(node, apmixed_clks,
-+      mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
-                              ARRAY_SIZE(apmixed_clks), clk_data);
-       return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-@@ -682,8 +682,8 @@ static int mtk_pericfg_init(struct platf
-       clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
--      mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+                             ARRAY_SIZE(peri_clks), clk_data);
-       mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-                                   &mt7622_clk_lock, clk_data);
---- a/drivers/clk/mediatek/clk-mt7629-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7629-eth.c
-@@ -82,7 +82,8 @@ static int clk_mt7629_ethsys_init(struct
-       if (!clk_data)
-               return -ENOMEM;
--      mtk_clk_register_gates(node, eth_clks, CLK_ETH_NR_CLK, clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+                             CLK_ETH_NR_CLK, clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -106,8 +107,8 @@ static int clk_mt7629_sgmiisys_init(stru
-       if (!clk_data)
-               return -ENOMEM;
--      mtk_clk_register_gates(node, sgmii_clks[id++], CLK_SGMII_NR_CLK,
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, sgmii_clks[id++],
-+                             CLK_SGMII_NR_CLK, clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt7629-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7629-hif.c
-@@ -75,8 +75,8 @@ static int clk_mt7629_ssusbsys_init(stru
-       clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--      mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-+                             ARRAY_SIZE(ssusb_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -97,8 +97,8 @@ static int clk_mt7629_pciesys_init(struc
-       clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--      mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-+                             ARRAY_SIZE(pcie_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -585,8 +585,8 @@ static int mtk_infrasys_init(struct plat
-       if (!clk_data)
-               return -ENOMEM;
--      mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+                             ARRAY_SIZE(infra_clks), clk_data);
-       mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-                                 clk_data);
-@@ -610,8 +610,8 @@ static int mtk_pericfg_init(struct platf
-       if (!clk_data)
-               return -ENOMEM;
--      mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+                             ARRAY_SIZE(peri_clks), clk_data);
-       mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-                                   &mt7629_clk_lock, clk_data);
-@@ -637,7 +637,7 @@ static int mtk_apmixedsys_init(struct pl
-       mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
-                             clk_data);
--      mtk_clk_register_gates(node, apmixed_clks,
-+      mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
-                              ARRAY_SIZE(apmixed_clks), clk_data);
-       clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
---- a/drivers/clk/mediatek/clk-mt7986-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7986-eth.c
-@@ -72,8 +72,8 @@ static void __init mtk_sgmiisys_0_init(s
-       clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii0_clks));
--      mtk_clk_register_gates(node, sgmii0_clks, ARRAY_SIZE(sgmii0_clks),
--                             clk_data);
-+      mtk_clk_register_gates(NULL, node, sgmii0_clks,
-+                             ARRAY_SIZE(sgmii0_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -90,8 +90,8 @@ static void __init mtk_sgmiisys_1_init(s
-       clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii1_clks));
--      mtk_clk_register_gates(node, sgmii1_clks, ARRAY_SIZE(sgmii1_clks),
--                             clk_data);
-+      mtk_clk_register_gates(NULL, node, sgmii1_clks,
-+                             ARRAY_SIZE(sgmii1_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-@@ -109,7 +109,7 @@ static void __init mtk_ethsys_init(struc
-       clk_data = mtk_alloc_clk_data(ARRAY_SIZE(eth_clks));
--      mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
-+      mtk_clk_register_gates(NULL, node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c
-@@ -180,8 +180,8 @@ static int clk_mt7986_infracfg_probe(str
-       mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
-       mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
-                              &mt7986_clk_lock, clk_data);
--      mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
--                             clk_data);
-+      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+                             ARRAY_SIZE(infra_clks), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -459,8 +459,8 @@ int mtk_clk_simple_probe(struct platform
-       if (!clk_data)
-               return -ENOMEM;
--      r = mtk_clk_register_gates_with_dev(node, mcd->clks, mcd->num_clks,
--                                          clk_data, &pdev->dev);
-+      r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks,
-+                                 clk_data);
-       if (r)
-               goto free_data;
diff --git a/target/linux/mediatek/patches-6.6/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch b/target/linux/mediatek/patches-6.6/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch
deleted file mode 100644 (file)
index 223155c..0000000
+++ /dev/null
@@ -1,140 +0,0 @@
-From b888303c7d23d7bd0c8667cfc657669e5d153fea Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:34 +0100
-Subject: [PATCH 02/15] clk: mediatek: cpumux: Propagate struct device where
- possible
-
-Take a pointer to a struct device in mtk_clk_register_cpumuxes() and
-propagate the same to mtk_clk_register_cpumux() => clk_hw_register().
-Even though runtime pm is unlikely to be used with CPU muxes, this
-helps with code consistency and possibly opens to commonization of
-some mtk_clk_register_(x) functions.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-5-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-cpumux.c          | 8 ++++----
- drivers/clk/mediatek/clk-cpumux.h          | 2 +-
- drivers/clk/mediatek/clk-mt2701.c          | 2 +-
- drivers/clk/mediatek/clk-mt6795-infracfg.c | 3 ++-
- drivers/clk/mediatek/clk-mt7622.c          | 4 ++--
- drivers/clk/mediatek/clk-mt7629.c          | 4 ++--
- drivers/clk/mediatek/clk-mt8173.c          | 4 ++--
- 7 files changed, 14 insertions(+), 13 deletions(-)
-
---- a/drivers/clk/mediatek/clk-cpumux.c
-+++ b/drivers/clk/mediatek/clk-cpumux.c
-@@ -58,7 +58,7 @@ static const struct clk_ops clk_cpumux_o
- };
- static struct clk_hw *
--mtk_clk_register_cpumux(const struct mtk_composite *mux,
-+mtk_clk_register_cpumux(struct device *dev, const struct mtk_composite *mux,
-                       struct regmap *regmap)
- {
-       struct mtk_clk_cpumux *cpumux;
-@@ -81,7 +81,7 @@ mtk_clk_register_cpumux(const struct mtk
-       cpumux->regmap = regmap;
-       cpumux->hw.init = &init;
--      ret = clk_hw_register(NULL, &cpumux->hw);
-+      ret = clk_hw_register(dev, &cpumux->hw);
-       if (ret) {
-               kfree(cpumux);
-               return ERR_PTR(ret);
-@@ -102,7 +102,7 @@ static void mtk_clk_unregister_cpumux(st
-       kfree(cpumux);
- }
--int mtk_clk_register_cpumuxes(struct device_node *node,
-+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node,
-                             const struct mtk_composite *clks, int num,
-                             struct clk_hw_onecell_data *clk_data)
- {
-@@ -125,7 +125,7 @@ int mtk_clk_register_cpumuxes(struct dev
-                       continue;
-               }
--              hw = mtk_clk_register_cpumux(mux, regmap);
-+              hw = mtk_clk_register_cpumux(dev, mux, regmap);
-               if (IS_ERR(hw)) {
-                       pr_err("Failed to register clk %s: %pe\n", mux->name,
-                              hw);
---- a/drivers/clk/mediatek/clk-cpumux.h
-+++ b/drivers/clk/mediatek/clk-cpumux.h
-@@ -11,7 +11,7 @@ struct clk_hw_onecell_data;
- struct device_node;
- struct mtk_composite;
--int mtk_clk_register_cpumuxes(struct device_node *node,
-+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node,
-                             const struct mtk_composite *clks, int num,
-                             struct clk_hw_onecell_data *clk_data);
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -761,7 +761,7 @@ static void __init mtk_infrasys_init_ear
-       mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
-                                               infra_clk_data);
--      mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-+      mtk_clk_register_cpumuxes(NULL, node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-                                 infra_clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
---- a/drivers/clk/mediatek/clk-mt6795-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt6795-infracfg.c
-@@ -105,7 +105,8 @@ static int clk_mt6795_infracfg_probe(str
-       if (ret)
-               goto free_clk_data;
--      ret = mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), clk_data);
-+      ret = mtk_clk_register_cpumuxes(&pdev->dev, node, cpu_muxes,
-+                                      ARRAY_SIZE(cpu_muxes), clk_data);
-       if (ret)
-               goto unregister_gates;
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -638,8 +638,8 @@ static int mtk_infrasys_init(struct plat
-       mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-                              ARRAY_SIZE(infra_clks), clk_data);
--      mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
--                                clk_data);
-+      mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes,
-+                                ARRAY_SIZE(infra_muxes), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
-                                  clk_data);
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -588,8 +588,8 @@ static int mtk_infrasys_init(struct plat
-       mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-                              ARRAY_SIZE(infra_clks), clk_data);
--      mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
--                                clk_data);
-+      mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes,
-+                                ARRAY_SIZE(infra_muxes), clk_data);
-       return of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
-                                     clk_data);
---- a/drivers/clk/mediatek/clk-mt8173.c
-+++ b/drivers/clk/mediatek/clk-mt8173.c
-@@ -892,8 +892,8 @@ static void __init mtk_infrasys_init(str
-                                               clk_data);
-       mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
--      mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
--                                clk_data);
-+      mtk_clk_register_cpumuxes(NULL, node, cpu_muxes,
-+                                ARRAY_SIZE(cpu_muxes), clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
diff --git a/target/linux/mediatek/patches-6.6/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch b/target/linux/mediatek/patches-6.6/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch
deleted file mode 100644 (file)
index eca1b61..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-From f23375db001ec0fe9f565be75eff43adde15407e Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:35 +0100
-Subject: [PATCH 03/15] clk: mediatek: clk-mtk: Propagate struct device for
- composites
-
-Like done for cpumux clocks, propagate struct device for composite
-clocks registered through clk-mtk helpers to be able to get runtime
-pm support for MTK clocks.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-6-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: remove parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt2701.c | 10 ++++++----
- drivers/clk/mediatek/clk-mt2712.c | 12 ++++++++----
- drivers/clk/mediatek/clk-mt7622.c |  8 +++++---
- drivers/clk/mediatek/clk-mt7629.c |  8 +++++---
- drivers/clk/mediatek/clk-mtk.c    | 11 ++++++-----
- drivers/clk/mediatek/clk-mtk.h    |  3 ++-
- 6 files changed, 32 insertions(+), 20 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -679,8 +679,9 @@ static int mtk_topckgen_init(struct plat
-       mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs),
-                                                               clk_data);
--      mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
--                              base, &mt2701_clk_lock, clk_data);
-+      mtk_clk_register_composites(&pdev->dev, top_muxes,
-+                                  ARRAY_SIZE(top_muxes), base,
-+                                  &mt2701_clk_lock, clk_data);
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
-                               base, &mt2701_clk_lock, clk_data);
-@@ -905,8 +906,9 @@ static int mtk_pericfg_init(struct platf
-       mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-                              ARRAY_SIZE(peri_clks), clk_data);
--      mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
--                      &mt2701_clk_lock, clk_data);
-+      mtk_clk_register_composites(&pdev->dev, peri_muxs,
-+                                  ARRAY_SIZE(peri_muxs), base,
-+                                  &mt2701_clk_lock, clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1320,8 +1320,9 @@ static int clk_mt2712_top_probe(struct p
-       mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs),
-                       top_clk_data);
-       mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data);
--      mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
--                      &mt2712_clk_lock, top_clk_data);
-+      mtk_clk_register_composites(&pdev->dev, top_muxes,
-+                                  ARRAY_SIZE(top_muxes), base,
-+                                  &mt2712_clk_lock, top_clk_data);
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
-                       &mt2712_clk_lock, top_clk_data);
-       mtk_clk_register_gates(&pdev->dev, node, top_clks,
-@@ -1395,8 +1396,11 @@ static int clk_mt2712_mcu_probe(struct p
-       clk_data = mtk_alloc_clk_data(CLK_MCU_NR_CLK);
--      mtk_clk_register_composites(mcu_muxes, ARRAY_SIZE(mcu_muxes), base,
--                      &mt2712_clk_lock, clk_data);
-+      r = mtk_clk_register_composites(&pdev->dev, mcu_muxes,
-+                                      ARRAY_SIZE(mcu_muxes), base,
-+                                      &mt2712_clk_lock, clk_data);
-+      if (r)
-+              dev_err(&pdev->dev, "Could not register composites: %d\n", r);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -615,8 +615,9 @@ static int mtk_topckgen_init(struct plat
-       mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
-                                clk_data);
--      mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
--                                  base, &mt7622_clk_lock, clk_data);
-+      mtk_clk_register_composites(&pdev->dev, top_muxes,
-+                                  ARRAY_SIZE(top_muxes), base,
-+                                  &mt7622_clk_lock, clk_data);
-       mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
-                                 base, &mt7622_clk_lock, clk_data);
-@@ -685,7 +686,8 @@ static int mtk_pericfg_init(struct platf
-       mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-                              ARRAY_SIZE(peri_clks), clk_data);
--      mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+      mtk_clk_register_composites(&pdev->dev, peri_muxes,
-+                                  ARRAY_SIZE(peri_muxes), base,
-                                   &mt7622_clk_lock, clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -566,8 +566,9 @@ static int mtk_topckgen_init(struct plat
-       mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
-                                clk_data);
--      mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
--                                  base, &mt7629_clk_lock, clk_data);
-+      mtk_clk_register_composites(&pdev->dev, top_muxes,
-+                                  ARRAY_SIZE(top_muxes), base,
-+                                  &mt7629_clk_lock, clk_data);
-       clk_prepare_enable(clk_data->hws[CLK_TOP_AXI_SEL]->clk);
-       clk_prepare_enable(clk_data->hws[CLK_TOP_MEM_SEL]->clk);
-@@ -613,7 +614,8 @@ static int mtk_pericfg_init(struct platf
-       mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-                              ARRAY_SIZE(peri_clks), clk_data);
--      mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+      mtk_clk_register_composites(&pdev->dev, peri_muxes,
-+                                  ARRAY_SIZE(peri_muxes), base,
-                                   &mt7629_clk_lock, clk_data);
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -197,8 +197,8 @@ void mtk_clk_unregister_factors(const st
- }
- EXPORT_SYMBOL_GPL(mtk_clk_unregister_factors);
--static struct clk_hw *mtk_clk_register_composite(const struct mtk_composite *mc,
--              void __iomem *base, spinlock_t *lock)
-+static struct clk_hw *mtk_clk_register_composite(struct device *dev,
-+              const struct mtk_composite *mc, void __iomem *base, spinlock_t *lock)
- {
-       struct clk_hw *hw;
-       struct clk_mux *mux = NULL;
-@@ -264,7 +264,7 @@ static struct clk_hw *mtk_clk_register_c
-               div_ops = &clk_divider_ops;
-       }
--      hw = clk_hw_register_composite(NULL, mc->name, parent_names, num_parents,
-+      hw = clk_hw_register_composite(dev, mc->name, parent_names, num_parents,
-               mux_hw, mux_ops,
-               div_hw, div_ops,
-               gate_hw, gate_ops,
-@@ -308,7 +308,8 @@ static void mtk_clk_unregister_composite
-       kfree(mux);
- }
--int mtk_clk_register_composites(const struct mtk_composite *mcs, int num,
-+int mtk_clk_register_composites(struct device *dev,
-+                              const struct mtk_composite *mcs, int num,
-                               void __iomem *base, spinlock_t *lock,
-                               struct clk_hw_onecell_data *clk_data)
- {
-@@ -327,7 +328,7 @@ int mtk_clk_register_composites(const st
-                       continue;
-               }
--              hw = mtk_clk_register_composite(mc, base, lock);
-+              hw = mtk_clk_register_composite(dev, mc, base, lock);
-               if (IS_ERR(hw)) {
-                       pr_err("Failed to register clk %s: %pe\n", mc->name,
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -149,7 +149,8 @@ struct mtk_composite {
-               .flags = 0,                                             \
-       }
--int mtk_clk_register_composites(const struct mtk_composite *mcs, int num,
-+int mtk_clk_register_composites(struct device *dev,
-+                              const struct mtk_composite *mcs, int num,
-                               void __iomem *base, spinlock_t *lock,
-                               struct clk_hw_onecell_data *clk_data);
- void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num,
diff --git a/target/linux/mediatek/patches-6.6/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch b/target/linux/mediatek/patches-6.6/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch
deleted file mode 100644 (file)
index a50422d..0000000
+++ /dev/null
@@ -1,103 +0,0 @@
-From 5d911479e4c732729bfa798e4a9e3e5aec3e30a7 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:36 +0100
-Subject: [PATCH 04/15] clk: mediatek: clk-mux: Propagate struct device for
- mtk-mux
-
-Like done for other clocks, propagate struct device for mtk mux clocks
-registered through clk-mux helpers to enable runtime pm support.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-7-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: removed parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt7986-infracfg.c |  3 ++-
- drivers/clk/mediatek/clk-mt7986-topckgen.c |  3 ++-
- drivers/clk/mediatek/clk-mux.c             | 14 ++++++++------
- drivers/clk/mediatek/clk-mux.h             |  3 ++-
- 4 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c
-@@ -178,7 +178,8 @@ static int clk_mt7986_infracfg_probe(str
-               return -ENOMEM;
-       mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
--      mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
-+      mtk_clk_register_muxes(&pdev->dev, infra_muxes,
-+                             ARRAY_SIZE(infra_muxes), node,
-                              &mt7986_clk_lock, clk_data);
-       mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-                              ARRAY_SIZE(infra_clks), clk_data);
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -303,7 +303,8 @@ static int clk_mt7986_topckgen_probe(str
-       mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
-                                   clk_data);
-       mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
--      mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), node,
-+      mtk_clk_register_muxes(&pdev->dev, top_muxes,
-+                             ARRAY_SIZE(top_muxes), node,
-                              &mt7986_clk_lock, clk_data);
-       clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk);
---- a/drivers/clk/mediatek/clk-mux.c
-+++ b/drivers/clk/mediatek/clk-mux.c
-@@ -154,9 +154,10 @@ const struct clk_ops mtk_mux_gate_clr_se
- };
- EXPORT_SYMBOL_GPL(mtk_mux_gate_clr_set_upd_ops);
--static struct clk_hw *mtk_clk_register_mux(const struct mtk_mux *mux,
--                               struct regmap *regmap,
--                               spinlock_t *lock)
-+static struct clk_hw *mtk_clk_register_mux(struct device *dev,
-+                                         const struct mtk_mux *mux,
-+                                         struct regmap *regmap,
-+                                         spinlock_t *lock)
- {
-       struct mtk_clk_mux *clk_mux;
-       struct clk_init_data init = {};
-@@ -177,7 +178,7 @@ static struct clk_hw *mtk_clk_register_m
-       clk_mux->lock = lock;
-       clk_mux->hw.init = &init;
--      ret = clk_hw_register(NULL, &clk_mux->hw);
-+      ret = clk_hw_register(dev, &clk_mux->hw);
-       if (ret) {
-               kfree(clk_mux);
-               return ERR_PTR(ret);
-@@ -198,7 +199,8 @@ static void mtk_clk_unregister_mux(struc
-       kfree(mux);
- }
--int mtk_clk_register_muxes(const struct mtk_mux *muxes,
-+int mtk_clk_register_muxes(struct device *dev,
-+                         const struct mtk_mux *muxes,
-                          int num, struct device_node *node,
-                          spinlock_t *lock,
-                          struct clk_hw_onecell_data *clk_data)
-@@ -222,7 +224,7 @@ int mtk_clk_register_muxes(const struct
-                       continue;
-               }
--              hw = mtk_clk_register_mux(mux, regmap, lock);
-+              hw = mtk_clk_register_mux(dev, mux, regmap, lock);
-               if (IS_ERR(hw)) {
-                       pr_err("Failed to register clk %s: %pe\n", mux->name,
---- a/drivers/clk/mediatek/clk-mux.h
-+++ b/drivers/clk/mediatek/clk-mux.h
-@@ -83,7 +83,8 @@ extern const struct clk_ops mtk_mux_gate
-                       0, _upd_ofs, _upd, CLK_SET_RATE_PARENT,         \
-                       mtk_mux_clr_set_upd_ops)
--int mtk_clk_register_muxes(const struct mtk_mux *muxes,
-+int mtk_clk_register_muxes(struct device *dev,
-+                         const struct mtk_mux *muxes,
-                          int num, struct device_node *node,
-                          spinlock_t *lock,
-                          struct clk_hw_onecell_data *clk_data);
diff --git a/target/linux/mediatek/patches-6.6/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch b/target/linux/mediatek/patches-6.6/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch
deleted file mode 100644 (file)
index de2e697..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From b8eb1081d267708ba976525a1fe2162901b34f3a Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:37 +0100
-Subject: [PATCH] clk: mediatek: clk-mtk: Add dummy clock ops
-
-In order to migrate some (few) old clock drivers to the common
-mtk_clk_simple_probe() function, add dummy clock ops to be able
-to insert a dummy clock with ID 0 at the beginning of the list.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-8-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mtk.c | 16 ++++++++++++++++
- drivers/clk/mediatek/clk-mtk.h | 19 +++++++++++++++++++
- 2 files changed, 35 insertions(+)
-
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -18,6 +18,22 @@
- #include "clk-mtk.h"
- #include "clk-gate.h"
-+const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 };
-+EXPORT_SYMBOL_GPL(cg_regs_dummy);
-+
-+static int mtk_clk_dummy_enable(struct clk_hw *hw)
-+{
-+      return 0;
-+}
-+
-+static void mtk_clk_dummy_disable(struct clk_hw *hw) { }
-+
-+const struct clk_ops mtk_clk_dummy_ops = {
-+      .enable         = mtk_clk_dummy_enable,
-+      .disable        = mtk_clk_dummy_disable,
-+};
-+EXPORT_SYMBOL_GPL(mtk_clk_dummy_ops);
-+
- static void mtk_init_clk_data(struct clk_hw_onecell_data *clk_data,
-                             unsigned int clk_num)
- {
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -22,6 +22,25 @@
- struct platform_device;
-+/*
-+ * We need the clock IDs to start from zero but to maintain devicetree
-+ * backwards compatibility we can't change bindings to start from zero.
-+ * Only a few platforms are affected, so we solve issues given by the
-+ * commonized MTK clocks probe function(s) by adding a dummy clock at
-+ * the beginning where needed.
-+ */
-+#define CLK_DUMMY             0
-+
-+extern const struct clk_ops mtk_clk_dummy_ops;
-+extern const struct mtk_gate_regs cg_regs_dummy;
-+
-+#define GATE_DUMMY(_id, _name) {                              \
-+              .id = _id,                                      \
-+              .name = _name,                                  \
-+              .regs = &cg_regs_dummy,                         \
-+              .ops = &mtk_clk_dummy_ops,                      \
-+      }
-+
- struct mtk_fixed_clk {
-       int id;
-       const char *name;
diff --git a/target/linux/mediatek/patches-6.6/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch b/target/linux/mediatek/patches-6.6/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch
deleted file mode 100644 (file)
index becfcd0..0000000
+++ /dev/null
@@ -1,790 +0,0 @@
-From c26e28015b74af73e0b299f6ad3ff22931e600b4 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:41 +0100
-Subject: [PATCH 05/15] clk: mediatek: Switch to mtk_clk_simple_probe() where
- possible
-
-mtk_clk_simple_probe() is a function that registers mtk gate clocks
-and, if reset data is present, a reset controller and across all of
-the MTK clock drivers, such a function is duplicated many times:
-switch to the common mtk_clk_simple_probe() function for all of the
-clock drivers that are registering as platform drivers.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-12-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: removed parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt2701-aud.c | 31 ++++++----
- drivers/clk/mediatek/clk-mt2701-eth.c | 36 ++++--------
- drivers/clk/mediatek/clk-mt2701-g3d.c | 56 ++++--------------
- drivers/clk/mediatek/clk-mt2701-hif.c | 38 ++++--------
- drivers/clk/mediatek/clk-mt2712.c     | 83 ++++++++++----------------
- drivers/clk/mediatek/clk-mt7622-aud.c | 54 ++++++-----------
- drivers/clk/mediatek/clk-mt7622-eth.c | 82 +++++---------------------
- drivers/clk/mediatek/clk-mt7622-hif.c | 85 +++++----------------------
- drivers/clk/mediatek/clk-mt7629-hif.c | 85 +++++----------------------
- 9 files changed, 144 insertions(+), 406 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt2701-aud.c
-+++ b/drivers/clk/mediatek/clk-mt2701-aud.c
-@@ -52,6 +52,7 @@ static const struct mtk_gate_regs audio3
- };
- static const struct mtk_gate audio_clks[] = {
-+      GATE_DUMMY(CLK_DUMMY, "aud_dummy"),
-       /* AUDIO0 */
-       GATE_AUDIO0(CLK_AUD_AFE, "audio_afe", "aud_intbus_sel", 2),
-       GATE_AUDIO0(CLK_AUD_HDMI, "audio_hdmi", "audpll_sel", 20),
-@@ -114,29 +115,27 @@ static const struct mtk_gate audio_clks[
-       GATE_AUDIO3(CLK_AUD_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
- };
-+static const struct mtk_clk_desc audio_desc = {
-+      .clks = audio_clks,
-+      .num_clks = ARRAY_SIZE(audio_clks),
-+};
-+
- static const struct of_device_id of_match_clk_mt2701_aud[] = {
--      { .compatible = "mediatek,mt2701-audsys", },
--      {}
-+      { .compatible = "mediatek,mt2701-audsys", .data = &audio_desc },
-+      { /* sentinel */ }
- };
- static int clk_mt2701_aud_probe(struct platform_device *pdev)
- {
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
-       int r;
--      clk_data = mtk_alloc_clk_data(CLK_AUD_NR);
--
--      mtk_clk_register_gates(&pdev->dev, node, audio_clks,
--                             ARRAY_SIZE(audio_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+      r = mtk_clk_simple_probe(pdev);
-       if (r) {
-               dev_err(&pdev->dev,
-                       "could not register clock provider: %s: %d\n",
-                       pdev->name, r);
--              goto err_clk_provider;
-+              return r;
-       }
-       r = devm_of_platform_populate(&pdev->dev);
-@@ -146,13 +145,19 @@ static int clk_mt2701_aud_probe(struct p
-       return 0;
- err_plat_populate:
--      of_clk_del_provider(node);
--err_clk_provider:
-+      mtk_clk_simple_remove(pdev);
-       return r;
- }
-+static int clk_mt2701_aud_remove(struct platform_device *pdev)
-+{
-+      of_platform_depopulate(&pdev->dev);
-+      return mtk_clk_simple_remove(pdev);
-+}
-+
- static struct platform_driver clk_mt2701_aud_drv = {
-       .probe = clk_mt2701_aud_probe,
-+      .remove = clk_mt2701_aud_remove,
-       .driver = {
-               .name = "clk-mt2701-aud",
-               .of_match_table = of_match_clk_mt2701_aud,
---- a/drivers/clk/mediatek/clk-mt2701-eth.c
-+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
-@@ -20,6 +20,7 @@ static const struct mtk_gate_regs eth_cg
-       GATE_MTK(_id, _name, _parent, &eth_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
- static const struct mtk_gate eth_clks[] = {
-+      GATE_DUMMY(CLK_DUMMY, "eth_dummy"),
-       GATE_ETH(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5),
-       GATE_ETH(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6),
-       GATE_ETH(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7),
-@@ -38,35 +39,20 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static const struct of_device_id of_match_clk_mt2701_eth[] = {
--      { .compatible = "mediatek,mt2701-ethsys", },
--      {}
-+static const struct mtk_clk_desc eth_desc = {
-+      .clks = eth_clks,
-+      .num_clks = ARRAY_SIZE(eth_clks),
-+      .rst_desc = &clk_rst_desc,
- };
--static int clk_mt2701_eth_probe(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      int r;
--      struct device_node *node = pdev->dev.of_node;
--
--      clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
--
--      mtk_clk_register_gates(&pdev->dev, node, eth_clks,
--                             ARRAY_SIZE(eth_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return r;
--}
-+static const struct of_device_id of_match_clk_mt2701_eth[] = {
-+      { .compatible = "mediatek,mt2701-ethsys", .data = &eth_desc },
-+      { /* sentinel */ }
-+};
- static struct platform_driver clk_mt2701_eth_drv = {
--      .probe = clk_mt2701_eth_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt2701-eth",
-               .of_match_table = of_match_clk_mt2701_eth,
---- a/drivers/clk/mediatek/clk-mt2701-g3d.c
-+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
-@@ -26,6 +26,7 @@ static const struct mtk_gate_regs g3d_cg
- };
- static const struct mtk_gate g3d_clks[] = {
-+      GATE_DUMMY(CLK_DUMMY, "g3d_dummy"),
-       GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
- };
-@@ -37,57 +38,20 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static int clk_mt2701_g3dsys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
--
--      mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks),
--                             clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return r;
--}
-+static const struct mtk_clk_desc g3d_desc = {
-+      .clks = g3d_clks,
-+      .num_clks = ARRAY_SIZE(g3d_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
- static const struct of_device_id of_match_clk_mt2701_g3d[] = {
--      {
--              .compatible = "mediatek,mt2701-g3dsys",
--              .data = clk_mt2701_g3dsys_init,
--      }, {
--              /* sentinel */
--      }
-+      { .compatible = "mediatek,mt2701-g3dsys", .data = &g3d_desc },
-+      { /* sentinel */ }
- };
--static int clk_mt2701_g3d_probe(struct platform_device *pdev)
--{
--      int (*clk_init)(struct platform_device *);
--      int r;
--
--      clk_init = of_device_get_match_data(&pdev->dev);
--      if (!clk_init)
--              return -EINVAL;
--
--      r = clk_init(pdev);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      return r;
--}
--
- static struct platform_driver clk_mt2701_g3d_drv = {
--      .probe = clk_mt2701_g3d_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt2701-g3d",
-               .of_match_table = of_match_clk_mt2701_g3d,
---- a/drivers/clk/mediatek/clk-mt2701-hif.c
-+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
-@@ -20,6 +20,7 @@ static const struct mtk_gate_regs hif_cg
-       GATE_MTK(_id, _name, _parent, &hif_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
- static const struct mtk_gate hif_clks[] = {
-+      GATE_DUMMY(CLK_DUMMY, "hif_dummy"),
-       GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21),
-       GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22),
-       GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24),
-@@ -35,37 +36,20 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static const struct of_device_id of_match_clk_mt2701_hif[] = {
--      { .compatible = "mediatek,mt2701-hifsys", },
--      {}
-+static const struct mtk_clk_desc hif_desc = {
-+      .clks = hif_clks,
-+      .num_clks = ARRAY_SIZE(hif_clks),
-+      .rst_desc = &clk_rst_desc,
- };
--static int clk_mt2701_hif_probe(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      int r;
--      struct device_node *node = pdev->dev.of_node;
--
--      clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
--
--      mtk_clk_register_gates(&pdev->dev, node, hif_clks,
--                             ARRAY_SIZE(hif_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r) {
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--              return r;
--      }
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return 0;
--}
-+static const struct of_device_id of_match_clk_mt2701_hif[] = {
-+      { .compatible = "mediatek,mt2701-hifsys", .data = &hif_desc },
-+      { /* sentinel */ }
-+};
- static struct platform_driver clk_mt2701_hif_drv = {
--      .probe = clk_mt2701_hif_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt2701-hif",
-               .of_match_table = of_match_clk_mt2701_hif,
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1337,50 +1337,6 @@ static int clk_mt2712_top_probe(struct p
-       return r;
- }
--static int clk_mt2712_infra_probe(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      int r;
--      struct device_node *node = pdev->dev.of_node;
--
--      clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, infra_clks,
--                             ARRAY_SIZE(infra_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
--      if (r != 0)
--              pr_err("%s(): could not register clock provider: %d\n",
--                      __func__, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[0]);
--
--      return r;
--}
--
--static int clk_mt2712_peri_probe(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      int r;
--      struct device_node *node = pdev->dev.of_node;
--
--      clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, peri_clks,
--                             ARRAY_SIZE(peri_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
--      if (r != 0)
--              pr_err("%s(): could not register clock provider: %d\n",
--                      __func__, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[1]);
--
--      return r;
--}
--
- static int clk_mt2712_mcu_probe(struct platform_device *pdev)
- {
-       struct clk_hw_onecell_data *clk_data;
-@@ -1419,12 +1375,6 @@ static const struct of_device_id of_matc
-               .compatible = "mediatek,mt2712-topckgen",
-               .data = clk_mt2712_top_probe,
-       }, {
--              .compatible = "mediatek,mt2712-infracfg",
--              .data = clk_mt2712_infra_probe,
--      }, {
--              .compatible = "mediatek,mt2712-pericfg",
--              .data = clk_mt2712_peri_probe,
--      }, {
-               .compatible = "mediatek,mt2712-mcucfg",
-               .data = clk_mt2712_mcu_probe,
-       }, {
-@@ -1450,6 +1400,33 @@ static int clk_mt2712_probe(struct platf
-       return r;
- }
-+static const struct mtk_clk_desc infra_desc = {
-+      .clks = infra_clks,
-+      .num_clks = ARRAY_SIZE(infra_clks),
-+      .rst_desc = &clk_rst_desc[0],
-+};
-+
-+static const struct mtk_clk_desc peri_desc = {
-+      .clks = peri_clks,
-+      .num_clks = ARRAY_SIZE(peri_clks),
-+      .rst_desc = &clk_rst_desc[1],
-+};
-+
-+static const struct of_device_id of_match_clk_mt2712_simple[] = {
-+      { .compatible = "mediatek,mt2712-infracfg", .data = &infra_desc },
-+      { .compatible = "mediatek,mt2712-pericfg", .data = &peri_desc, },
-+      { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt2712_simple_drv = {
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-+      .driver = {
-+              .name = "clk-mt2712-simple",
-+              .of_match_table = of_match_clk_mt2712_simple,
-+      },
-+};
-+
- static struct platform_driver clk_mt2712_drv = {
-       .probe = clk_mt2712_probe,
-       .driver = {
-@@ -1460,7 +1437,11 @@ static struct platform_driver clk_mt2712
- static int __init clk_mt2712_init(void)
- {
--      return platform_driver_register(&clk_mt2712_drv);
-+      int ret = platform_driver_register(&clk_mt2712_drv);
-+
-+      if (ret)
-+              return ret;
-+      return platform_driver_register(&clk_mt2712_simple_drv);
- }
- arch_initcall(clk_mt2712_init);
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -106,24 +106,22 @@ static const struct mtk_gate audio_clks[
-       GATE_AUDIO3(CLK_AUDIO_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
- };
--static int clk_mt7622_audiosys_init(struct platform_device *pdev)
-+static const struct mtk_clk_desc audio_desc = {
-+      .clks = audio_clks,
-+      .num_clks = ARRAY_SIZE(audio_clks),
-+};
-+
-+static int clk_mt7622_aud_probe(struct platform_device *pdev)
- {
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
-       int r;
--      clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, audio_clks,
--                             ARRAY_SIZE(audio_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+      r = mtk_clk_simple_probe(pdev);
-       if (r) {
-               dev_err(&pdev->dev,
-                       "could not register clock provider: %s: %d\n",
-                       pdev->name, r);
--              goto err_clk_provider;
-+              return r;
-       }
-       r = devm_of_platform_populate(&pdev->dev);
-@@ -133,40 +131,24 @@ static int clk_mt7622_audiosys_init(stru
-       return 0;
- err_plat_populate:
--      of_clk_del_provider(node);
--err_clk_provider:
-+      mtk_clk_simple_remove(pdev);
-       return r;
- }
--static const struct of_device_id of_match_clk_mt7622_aud[] = {
--      {
--              .compatible = "mediatek,mt7622-audsys",
--              .data = clk_mt7622_audiosys_init,
--      }, {
--              /* sentinel */
--      }
--};
--
--static int clk_mt7622_aud_probe(struct platform_device *pdev)
-+static int clk_mt7622_aud_remove(struct platform_device *pdev)
- {
--      int (*clk_init)(struct platform_device *);
--      int r;
--
--      clk_init = of_device_get_match_data(&pdev->dev);
--      if (!clk_init)
--              return -EINVAL;
--
--      r = clk_init(pdev);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      return r;
-+      of_platform_depopulate(&pdev->dev);
-+      return mtk_clk_simple_remove(pdev);
- }
-+static const struct of_device_id of_match_clk_mt7622_aud[] = {
-+      { .compatible = "mediatek,mt7622-audsys", .data = &audio_desc },
-+      { /* sentinel */ }
-+};
-+
- static struct platform_driver clk_mt7622_aud_drv = {
-       .probe = clk_mt7622_aud_probe,
-+      .remove = clk_mt7622_aud_remove,
-       .driver = {
-               .name = "clk-mt7622-aud",
-               .of_match_table = of_match_clk_mt7622_aud,
---- a/drivers/clk/mediatek/clk-mt7622-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7622-eth.c
-@@ -61,80 +61,26 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static int clk_mt7622_ethsys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, eth_clks,
--                             ARRAY_SIZE(eth_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return r;
--}
--
--static int clk_mt7622_sgmiisys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, sgmii_clks,
--                             ARRAY_SIZE(sgmii_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
-+static const struct mtk_clk_desc eth_desc = {
-+      .clks = eth_clks,
-+      .num_clks = ARRAY_SIZE(eth_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
--      return r;
--}
-+static const struct mtk_clk_desc sgmii_desc = {
-+      .clks = sgmii_clks,
-+      .num_clks = ARRAY_SIZE(sgmii_clks),
-+};
- static const struct of_device_id of_match_clk_mt7622_eth[] = {
--      {
--              .compatible = "mediatek,mt7622-ethsys",
--              .data = clk_mt7622_ethsys_init,
--      }, {
--              .compatible = "mediatek,mt7622-sgmiisys",
--              .data = clk_mt7622_sgmiisys_init,
--      }, {
--              /* sentinel */
--      }
-+      { .compatible = "mediatek,mt7622-ethsys", .data = &eth_desc },
-+      { .compatible = "mediatek,mt7622-sgmiisys", .data = &sgmii_desc },
-+      { /* sentinel */ }
- };
--static int clk_mt7622_eth_probe(struct platform_device *pdev)
--{
--      int (*clk_init)(struct platform_device *);
--      int r;
--
--      clk_init = of_device_get_match_data(&pdev->dev);
--      if (!clk_init)
--              return -EINVAL;
--
--      r = clk_init(pdev);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      return r;
--}
--
- static struct platform_driver clk_mt7622_eth_drv = {
--      .probe = clk_mt7622_eth_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt7622-eth",
-               .of_match_table = of_match_clk_mt7622_eth,
---- a/drivers/clk/mediatek/clk-mt7622-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7622-hif.c
-@@ -72,82 +72,27 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static int clk_mt7622_ssusbsys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
--                             ARRAY_SIZE(ssusb_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return r;
--}
--
--static int clk_mt7622_pciesys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
--                             ARRAY_SIZE(pcie_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
-+static const struct mtk_clk_desc ssusb_desc = {
-+      .clks = ssusb_clks,
-+      .num_clks = ARRAY_SIZE(ssusb_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
--      return r;
--}
-+static const struct mtk_clk_desc pcie_desc = {
-+      .clks = pcie_clks,
-+      .num_clks = ARRAY_SIZE(pcie_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
- static const struct of_device_id of_match_clk_mt7622_hif[] = {
--      {
--              .compatible = "mediatek,mt7622-pciesys",
--              .data = clk_mt7622_pciesys_init,
--      }, {
--              .compatible = "mediatek,mt7622-ssusbsys",
--              .data = clk_mt7622_ssusbsys_init,
--      }, {
--              /* sentinel */
--      }
-+      { .compatible = "mediatek,mt7622-pciesys", .data = &pcie_desc },
-+      { .compatible = "mediatek,mt7622-ssusbsys", .data = &ssusb_desc },
-+      { /* sentinel */ }
- };
--static int clk_mt7622_hif_probe(struct platform_device *pdev)
--{
--      int (*clk_init)(struct platform_device *);
--      int r;
--
--      clk_init = of_device_get_match_data(&pdev->dev);
--      if (!clk_init)
--              return -EINVAL;
--
--      r = clk_init(pdev);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      return r;
--}
--
- static struct platform_driver clk_mt7622_hif_drv = {
--      .probe = clk_mt7622_hif_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt7622-hif",
-               .of_match_table = of_match_clk_mt7622_hif,
---- a/drivers/clk/mediatek/clk-mt7629-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7629-hif.c
-@@ -67,82 +67,27 @@ static const struct mtk_clk_rst_desc clk
-       .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
--static int clk_mt7629_ssusbsys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
--                             ARRAY_SIZE(ssusb_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
--      return r;
--}
--
--static int clk_mt7629_pciesys_init(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--
--      clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--
--      mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
--                             ARRAY_SIZE(pcie_clks), clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
-+static const struct mtk_clk_desc ssusb_desc = {
-+      .clks = ssusb_clks,
-+      .num_clks = ARRAY_SIZE(ssusb_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
--      return r;
--}
-+static const struct mtk_clk_desc pcie_desc = {
-+      .clks = pcie_clks,
-+      .num_clks = ARRAY_SIZE(pcie_clks),
-+      .rst_desc = &clk_rst_desc,
-+};
- static const struct of_device_id of_match_clk_mt7629_hif[] = {
--      {
--              .compatible = "mediatek,mt7629-pciesys",
--              .data = clk_mt7629_pciesys_init,
--      }, {
--              .compatible = "mediatek,mt7629-ssusbsys",
--              .data = clk_mt7629_ssusbsys_init,
--      }, {
--              /* sentinel */
--      }
-+      { .compatible = "mediatek,mt7629-pciesys", .data = &pcie_desc },
-+      { .compatible = "mediatek,mt7629-ssusbsys", .data = &ssusb_desc },
-+      { /* sentinel */ }
- };
--static int clk_mt7629_hif_probe(struct platform_device *pdev)
--{
--      int (*clk_init)(struct platform_device *);
--      int r;
--
--      clk_init = of_device_get_match_data(&pdev->dev);
--      if (!clk_init)
--              return -EINVAL;
--
--      r = clk_init(pdev);
--      if (r)
--              dev_err(&pdev->dev,
--                      "could not register clock provider: %s: %d\n",
--                      pdev->name, r);
--
--      return r;
--}
--
- static struct platform_driver clk_mt7629_hif_drv = {
--      .probe = clk_mt7629_hif_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt7629-hif",
-               .of_match_table = of_match_clk_mt7629_hif,
diff --git a/target/linux/mediatek/patches-6.6/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch b/target/linux/mediatek/patches-6.6/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch
deleted file mode 100644 (file)
index ad02df1..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-From 7b6183108c8ccf0dc295f39cdf78bd8078455636 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:42 +0100
-Subject: [PATCH] clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
-
-As a preparation to increase probe functions commonization across
-various MediaTek SoC clock controller drivers, extend function
-mtk_clk_simple_probe() to be able to register not only gates, but
-also fixed clocks, factors, muxes and composites.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-13-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mtk.c | 101 ++++++++++++++++++++++++++++++---
- drivers/clk/mediatek/clk-mtk.h |  10 ++++
- 2 files changed, 103 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -11,12 +11,14 @@
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_address.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include "clk-mtk.h"
- #include "clk-gate.h"
-+#include "clk-mux.h"
- const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 };
- EXPORT_SYMBOL_GPL(cg_regs_dummy);
-@@ -466,20 +468,71 @@ int mtk_clk_simple_probe(struct platform
-       const struct mtk_clk_desc *mcd;
-       struct clk_hw_onecell_data *clk_data;
-       struct device_node *node = pdev->dev.of_node;
--      int r;
-+      void __iomem *base;
-+      int num_clks, r;
-       mcd = of_device_get_match_data(&pdev->dev);
-       if (!mcd)
-               return -EINVAL;
--      clk_data = mtk_alloc_clk_data(mcd->num_clks);
-+      /* Composite clocks needs us to pass iomem pointer */
-+      if (mcd->composite_clks) {
-+              if (!mcd->shared_io)
-+                      base = devm_platform_ioremap_resource(pdev, 0);
-+              else
-+                      base = of_iomap(node, 0);
-+
-+              if (IS_ERR_OR_NULL(base))
-+                      return IS_ERR(base) ? PTR_ERR(base) : -ENOMEM;
-+      }
-+
-+      /* Calculate how many clk_hw_onecell_data entries to allocate */
-+      num_clks = mcd->num_clks + mcd->num_composite_clks;
-+      num_clks += mcd->num_fixed_clks + mcd->num_factor_clks;
-+      num_clks += mcd->num_mux_clks;
-+
-+      clk_data = mtk_alloc_clk_data(num_clks);
-       if (!clk_data)
-               return -ENOMEM;
--      r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks,
--                                 clk_data);
--      if (r)
--              goto free_data;
-+      if (mcd->fixed_clks) {
-+              r = mtk_clk_register_fixed_clks(mcd->fixed_clks,
-+                                              mcd->num_fixed_clks, clk_data);
-+              if (r)
-+                      goto free_data;
-+      }
-+
-+      if (mcd->factor_clks) {
-+              r = mtk_clk_register_factors(mcd->factor_clks,
-+                                           mcd->num_factor_clks, clk_data);
-+              if (r)
-+                      goto unregister_fixed_clks;
-+      }
-+
-+      if (mcd->mux_clks) {
-+              r = mtk_clk_register_muxes(&pdev->dev, mcd->mux_clks,
-+                                         mcd->num_mux_clks, node,
-+                                         mcd->clk_lock, clk_data);
-+              if (r)
-+                      goto unregister_factors;
-+      };
-+
-+      if (mcd->composite_clks) {
-+              /* We don't check composite_lock because it's optional */
-+              r = mtk_clk_register_composites(&pdev->dev,
-+                                              mcd->composite_clks,
-+                                              mcd->num_composite_clks,
-+                                              base, mcd->clk_lock, clk_data);
-+              if (r)
-+                      goto unregister_muxes;
-+      }
-+
-+      if (mcd->clks) {
-+              r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks,
-+                                         mcd->num_clks, clk_data);
-+              if (r)
-+                      goto unregister_composites;
-+      }
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r)
-@@ -497,9 +550,28 @@ int mtk_clk_simple_probe(struct platform
-       return r;
- unregister_clks:
--      mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+      if (mcd->clks)
-+              mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+unregister_composites:
-+      if (mcd->composite_clks)
-+              mtk_clk_unregister_composites(mcd->composite_clks,
-+                                            mcd->num_composite_clks, clk_data);
-+unregister_muxes:
-+      if (mcd->mux_clks)
-+              mtk_clk_unregister_muxes(mcd->mux_clks,
-+                                       mcd->num_mux_clks, clk_data);
-+unregister_factors:
-+      if (mcd->factor_clks)
-+              mtk_clk_unregister_factors(mcd->factor_clks,
-+                                         mcd->num_factor_clks, clk_data);
-+unregister_fixed_clks:
-+      if (mcd->fixed_clks)
-+              mtk_clk_unregister_fixed_clks(mcd->fixed_clks,
-+                                            mcd->num_fixed_clks, clk_data);
- free_data:
-       mtk_free_clk_data(clk_data);
-+      if (mcd->shared_io && base)
-+              iounmap(base);
-       return r;
- }
- EXPORT_SYMBOL_GPL(mtk_clk_simple_probe);
-@@ -511,7 +583,20 @@ int mtk_clk_simple_remove(struct platfor
-       struct device_node *node = pdev->dev.of_node;
-       of_clk_del_provider(node);
--      mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+      if (mcd->clks)
-+              mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+      if (mcd->composite_clks)
-+              mtk_clk_unregister_composites(mcd->composite_clks,
-+                                            mcd->num_composite_clks, clk_data);
-+      if (mcd->mux_clks)
-+              mtk_clk_unregister_muxes(mcd->mux_clks,
-+                                       mcd->num_mux_clks, clk_data);
-+      if (mcd->factor_clks)
-+              mtk_clk_unregister_factors(mcd->factor_clks,
-+                                         mcd->num_factor_clks, clk_data);
-+      if (mcd->fixed_clks)
-+              mtk_clk_unregister_fixed_clks(mcd->fixed_clks,
-+                                            mcd->num_fixed_clks, clk_data);
-       mtk_free_clk_data(clk_data);
-       return 0;
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -215,7 +215,17 @@ void mtk_clk_unregister_ref2usb_tx(struc
- struct mtk_clk_desc {
-       const struct mtk_gate *clks;
-       size_t num_clks;
-+      const struct mtk_composite *composite_clks;
-+      size_t num_composite_clks;
-+      const struct mtk_fixed_clk *fixed_clks;
-+      size_t num_fixed_clks;
-+      const struct mtk_fixed_factor *factor_clks;
-+      size_t num_factor_clks;
-+      const struct mtk_mux *mux_clks;
-+      size_t num_mux_clks;
-       const struct mtk_clk_rst_desc *rst_desc;
-+      spinlock_t *clk_lock;
-+      bool shared_io;
- };
- int mtk_clk_simple_probe(struct platform_device *pdev);
diff --git a/target/linux/mediatek/patches-6.6/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch b/target/linux/mediatek/patches-6.6/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch
deleted file mode 100644 (file)
index bf9a172..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-From 3511004225ce917a4aa6e6ac61481ac60f08f401 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:52 +0100
-Subject: [PATCH 06/15] clk: mediatek: clk-mt7986-topckgen: Properly keep some
- clocks enabled
-
-Instead of calling clk_prepare_enable() on a bunch of clocks at probe
-time, set the CLK_IS_CRITICAL flag to the same as these are required
-to be always on, and this is the right way of achieving that.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-23-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-topckgen.c | 46 +++++++++++-----------
- 1 file changed, 24 insertions(+), 22 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -202,16 +202,23 @@ static const struct mtk_mux top_muxes[]
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel",
-                            f_26m_adc_parents, 0x020, 0x024, 0x028, 16, 1, 23,
-                            0x1C0, 10),
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents,
--                           0x020, 0x024, 0x028, 24, 1, 31, 0x1C0, 11),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel",
-+                                 f_26m_adc_parents, 0x020, 0x024, 0x028,
-+                                 24, 1, 31, 0x1C0, 11,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-       /* CLK_CFG_3 */
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
--                           dramc_md32_parents, 0x030, 0x034, 0x038, 0, 1, 7,
--                           0x1C0, 12),
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents,
--                           0x030, 0x034, 0x038, 8, 2, 15, 0x1C0, 13),
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents,
--                           0x030, 0x034, 0x038, 16, 2, 23, 0x1C0, 14),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
-+                                 dramc_md32_parents, 0x030, 0x034, 0x038,
-+                                 0, 1, 7, 0x1C0, 12,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel",
-+                                 sysaxi_parents, 0x030, 0x034, 0x038,
-+                                 8, 2, 15, 0x1C0, 13,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel",
-+                                 sysapb_parents, 0x030, 0x034, 0x038,
-+                                 16, 2, 23, 0x1C0, 14,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
-                            arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1,
-                            31, 0x1C0, 15),
-@@ -234,9 +241,10 @@ static const struct mtk_mux top_muxes[]
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
-                            sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
-                            0x1C0, 21),
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel",
--                           sgm_reg_parents, 0x050, 0x054, 0x058, 16, 1, 23,
--                           0x1C0, 22),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel",
-+                                 sgm_reg_parents, 0x050, 0x054, 0x058,
-+                                 16, 1, 23, 0x1C0, 22,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
-                            0x050, 0x054, 0x058, 24, 1, 31, 0x1C0, 23),
-       /* CLK_CFG_6 */
-@@ -252,9 +260,10 @@ static const struct mtk_mux top_muxes[]
-                            f_26m_adc_parents, 0x060, 0x064, 0x068, 24, 1, 31,
-                            0x1C0, 27),
-       /* CLK_CFG_7 */
--      MUX_GATE_CLR_SET_UPD(CLK_TOP_F26M_SEL, "csw_f26m_sel",
--                           f_26m_adc_parents, 0x070, 0x074, 0x078, 0, 1, 7,
--                           0x1C0, 28),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel",
-+                                 f_26m_adc_parents, 0x070, 0x074, 0x078,
-+                                 0, 1, 7, 0x1C0, 28,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
-                            0x070, 0x074, 0x078, 8, 2, 15, 0x1C0, 29),
-       MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel",
-@@ -307,13 +316,6 @@ static int clk_mt7986_topckgen_probe(str
-                              ARRAY_SIZE(top_muxes), node,
-                              &mt7986_clk_lock, clk_data);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAPB_SEL]->clk);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_SEL]->clk);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_MD32_SEL]->clk);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_F26M_SEL]->clk);
--      clk_prepare_enable(clk_data->hws[CLK_TOP_SGM_REG_SEL]->clk);
--
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
diff --git a/target/linux/mediatek/patches-6.6/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch b/target/linux/mediatek/patches-6.6/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch
deleted file mode 100644 (file)
index d77b859..0000000
+++ /dev/null
@@ -1,88 +0,0 @@
-From 9ce3b4e4719d4eec38b2c8da939c073835573d1d Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:53 +0100
-Subject: [PATCH 07/15] clk: mediatek: clk-mt7986-topckgen: Migrate to
- mtk_clk_simple_probe()
-
-There are no more non-common calls in clk_mt7986_topckgen_probe():
-migrate this driver to mtk_clk_simple_probe().
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Link: https://lore.kernel.org/r/20230120092053.182923-24-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-topckgen.c | 55 +++++-----------------
- 1 file changed, 13 insertions(+), 42 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -290,53 +290,24 @@ static const struct mtk_mux top_muxes[]
-                            0x1C4, 5),
- };
--static int clk_mt7986_topckgen_probe(struct platform_device *pdev)
--{
--      struct clk_hw_onecell_data *clk_data;
--      struct device_node *node = pdev->dev.of_node;
--      int r;
--      void __iomem *base;
--      int nr = ARRAY_SIZE(top_fixed_clks) + ARRAY_SIZE(top_divs) +
--               ARRAY_SIZE(top_muxes);
--
--      base = of_iomap(node, 0);
--      if (!base) {
--              pr_err("%s(): ioremap failed\n", __func__);
--              return -ENOMEM;
--      }
--
--      clk_data = mtk_alloc_clk_data(nr);
--      if (!clk_data)
--              return -ENOMEM;
--
--      mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
--                                  clk_data);
--      mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
--      mtk_clk_register_muxes(&pdev->dev, top_muxes,
--                             ARRAY_SIZE(top_muxes), node,
--                             &mt7986_clk_lock, clk_data);
--
--      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
--      if (r) {
--              pr_err("%s(): could not register clock provider: %d\n",
--                     __func__, r);
--              goto free_topckgen_data;
--      }
--      return r;
--
--free_topckgen_data:
--      mtk_free_clk_data(clk_data);
--      return r;
--}
-+static const struct mtk_clk_desc topck_desc = {
-+      .fixed_clks = top_fixed_clks,
-+      .num_fixed_clks = ARRAY_SIZE(top_fixed_clks),
-+      .factor_clks = top_divs,
-+      .num_factor_clks = ARRAY_SIZE(top_divs),
-+      .mux_clks = top_muxes,
-+      .num_mux_clks = ARRAY_SIZE(top_muxes),
-+      .clk_lock = &mt7986_clk_lock,
-+};
- static const struct of_device_id of_match_clk_mt7986_topckgen[] = {
--      { .compatible = "mediatek,mt7986-topckgen", },
--      {}
-+      { .compatible = "mediatek,mt7986-topckgen", .data = &topck_desc },
-+      { /* sentinel */ }
- };
- static struct platform_driver clk_mt7986_topckgen_drv = {
--      .probe = clk_mt7986_topckgen_probe,
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-       .driver = {
-               .name = "clk-mt7986-topckgen",
-               .of_match_table = of_match_clk_mt7986_topckgen,
diff --git a/target/linux/mediatek/patches-6.6/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch b/target/linux/mediatek/patches-6.6/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch
deleted file mode 100644 (file)
index a47dd4b..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 06abdc84080729dc2c54946e1712c5ee1589ca1c Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Mon, 6 Mar 2023 15:05:21 +0100
-Subject: [PATCH 13/15] clk: mediatek: mt7986-apmixed: Use PLL_AO flag to set
- critical clock
-
-Instead of calling clk_prepare_enable() at probe time, add the PLL_AO
-flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230306140543.1813621-33-angelogioacchino.delregno@collabora.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-apmixed.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-apmixed.c
-+++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c
-@@ -42,7 +42,7 @@
-                "clkxtal")
- static const struct mtk_pll_data plls[] = {
--      PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, 0, 32,
-+      PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, PLL_AO, 32,
-           0x0200, 4, 0, 0x0204, 0),
-       PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x0, 0, 32,
-           0x0210, 4, 0, 0x0214, 0),
-@@ -77,8 +77,6 @@ static int clk_mt7986_apmixed_probe(stru
-       mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
--      clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
--
-       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-       if (r) {
-               pr_err("%s(): could not register clock provider: %d\n",
diff --git a/target/linux/mediatek/patches-6.6/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch b/target/linux/mediatek/patches-6.6/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch
deleted file mode 100644 (file)
index ae76940..0000000
+++ /dev/null
@@ -1,237 +0,0 @@
-From a6473d0f9f07b1196f3a67099826f50a2a4e84e8 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:34:05 +0000
-Subject: [PATCH] dt-bindings: clock: mediatek: add mt7981 clock IDs
-
-Add MT7981 clock dt-bindings, include topckgen, apmixedsys,
-infracfg, and ethernet subsystem clocks.
-
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/e353d32b5a4481766519a037afe1ed44e31ece1a.1674703830.git.daniel@makrotopia.org
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- .../dt-bindings/clock/mediatek,mt7981-clk.h   | 215 ++++++++++++++++++
- 1 file changed, 215 insertions(+)
- create mode 100644 include/dt-bindings/clock/mediatek,mt7981-clk.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/mediatek,mt7981-clk.h
-@@ -0,0 +1,215 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Wenzhen.Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MT7981_H
-+#define _DT_BINDINGS_CLK_MT7981_H
-+
-+/* TOPCKGEN */
-+#define CLK_TOP_CB_CKSQ_40M           0
-+#define CLK_TOP_CB_M_416M             1
-+#define CLK_TOP_CB_M_D2                       2
-+#define CLK_TOP_CB_M_D3                       3
-+#define CLK_TOP_M_D3_D2                       4
-+#define CLK_TOP_CB_M_D4                       5
-+#define CLK_TOP_CB_M_D8                       6
-+#define CLK_TOP_M_D8_D2                       7
-+#define CLK_TOP_CB_MM_720M            8
-+#define CLK_TOP_CB_MM_D2              9
-+#define CLK_TOP_CB_MM_D3              10
-+#define CLK_TOP_CB_MM_D3_D5           11
-+#define CLK_TOP_CB_MM_D4              12
-+#define CLK_TOP_CB_MM_D6              13
-+#define CLK_TOP_MM_D6_D2              14
-+#define CLK_TOP_CB_MM_D8              15
-+#define CLK_TOP_CB_APLL2_196M         16
-+#define CLK_TOP_APLL2_D2              17
-+#define CLK_TOP_APLL2_D4              18
-+#define CLK_TOP_NET1_2500M            19
-+#define CLK_TOP_CB_NET1_D4            20
-+#define CLK_TOP_CB_NET1_D5            21
-+#define CLK_TOP_NET1_D5_D2            22
-+#define CLK_TOP_NET1_D5_D4            23
-+#define CLK_TOP_CB_NET1_D8            24
-+#define CLK_TOP_NET1_D8_D2            25
-+#define CLK_TOP_NET1_D8_D4            26
-+#define CLK_TOP_CB_NET2_800M          27
-+#define CLK_TOP_CB_NET2_D2            28
-+#define CLK_TOP_CB_NET2_D4            29
-+#define CLK_TOP_NET2_D4_D2            30
-+#define CLK_TOP_NET2_D4_D4            31
-+#define CLK_TOP_CB_NET2_D6            32
-+#define CLK_TOP_CB_WEDMCU_208M                33
-+#define CLK_TOP_CB_SGM_325M           34
-+#define CLK_TOP_CKSQ_40M_D2           35
-+#define CLK_TOP_CB_RTC_32K            36
-+#define CLK_TOP_CB_RTC_32P7K          37
-+#define CLK_TOP_USB_TX250M            38
-+#define CLK_TOP_FAUD                  39
-+#define CLK_TOP_NFI1X                 40
-+#define CLK_TOP_USB_EQ_RX250M         41
-+#define CLK_TOP_USB_CDR_CK            42
-+#define CLK_TOP_USB_LN0_CK            43
-+#define CLK_TOP_SPINFI_BCK            44
-+#define CLK_TOP_SPI                   45
-+#define CLK_TOP_SPIM_MST              46
-+#define CLK_TOP_UART_BCK              47
-+#define CLK_TOP_PWM_BCK                       48
-+#define CLK_TOP_I2C_BCK                       49
-+#define CLK_TOP_PEXTP_TL              50
-+#define CLK_TOP_EMMC_208M             51
-+#define CLK_TOP_EMMC_400M             52
-+#define CLK_TOP_DRAMC_REF             53
-+#define CLK_TOP_DRAMC_MD32            54
-+#define CLK_TOP_SYSAXI                        55
-+#define CLK_TOP_SYSAPB                        56
-+#define CLK_TOP_ARM_DB_MAIN           57
-+#define CLK_TOP_AP2CNN_HOST           58
-+#define CLK_TOP_NETSYS                        59
-+#define CLK_TOP_NETSYS_500M           60
-+#define CLK_TOP_NETSYS_WED_MCU                61
-+#define CLK_TOP_NETSYS_2X             62
-+#define CLK_TOP_SGM_325M              63
-+#define CLK_TOP_SGM_REG                       64
-+#define CLK_TOP_F26M                  65
-+#define CLK_TOP_EIP97B                        66
-+#define CLK_TOP_USB3_PHY              67
-+#define CLK_TOP_AUD                   68
-+#define CLK_TOP_A1SYS                 69
-+#define CLK_TOP_AUD_L                 70
-+#define CLK_TOP_A_TUNER                       71
-+#define CLK_TOP_U2U3_REF              72
-+#define CLK_TOP_U2U3_SYS              73
-+#define CLK_TOP_U2U3_XHCI             74
-+#define CLK_TOP_USB_FRMCNT            75
-+#define CLK_TOP_NFI1X_SEL             76
-+#define CLK_TOP_SPINFI_SEL            77
-+#define CLK_TOP_SPI_SEL                       78
-+#define CLK_TOP_SPIM_MST_SEL          79
-+#define CLK_TOP_UART_SEL              80
-+#define CLK_TOP_PWM_SEL                       81
-+#define CLK_TOP_I2C_SEL                       82
-+#define CLK_TOP_PEXTP_TL_SEL          83
-+#define CLK_TOP_EMMC_208M_SEL         84
-+#define CLK_TOP_EMMC_400M_SEL         85
-+#define CLK_TOP_F26M_SEL              86
-+#define CLK_TOP_DRAMC_SEL             87
-+#define CLK_TOP_DRAMC_MD32_SEL                88
-+#define CLK_TOP_SYSAXI_SEL            89
-+#define CLK_TOP_SYSAPB_SEL            90
-+#define CLK_TOP_ARM_DB_MAIN_SEL               91
-+#define CLK_TOP_AP2CNN_HOST_SEL               92
-+#define CLK_TOP_NETSYS_SEL            93
-+#define CLK_TOP_NETSYS_500M_SEL               94
-+#define CLK_TOP_NETSYS_MCU_SEL                95
-+#define CLK_TOP_NETSYS_2X_SEL         96
-+#define CLK_TOP_SGM_325M_SEL          97
-+#define CLK_TOP_SGM_REG_SEL           98
-+#define CLK_TOP_EIP97B_SEL            99
-+#define CLK_TOP_USB3_PHY_SEL          100
-+#define CLK_TOP_AUD_SEL                       101
-+#define CLK_TOP_A1SYS_SEL             102
-+#define CLK_TOP_AUD_L_SEL             103
-+#define CLK_TOP_A_TUNER_SEL           104
-+#define CLK_TOP_U2U3_SEL              105
-+#define CLK_TOP_U2U3_SYS_SEL          106
-+#define CLK_TOP_U2U3_XHCI_SEL         107
-+#define CLK_TOP_USB_FRMCNT_SEL                108
-+#define CLK_TOP_AUD_I2S_M             109
-+
-+/* INFRACFG */
-+#define CLK_INFRA_66M_MCK             0
-+#define CLK_INFRA_UART0_SEL           1
-+#define CLK_INFRA_UART1_SEL           2
-+#define CLK_INFRA_UART2_SEL           3
-+#define CLK_INFRA_SPI0_SEL            4
-+#define CLK_INFRA_SPI1_SEL            5
-+#define CLK_INFRA_SPI2_SEL            6
-+#define CLK_INFRA_PWM1_SEL            7
-+#define CLK_INFRA_PWM2_SEL            8
-+#define CLK_INFRA_PWM3_SEL            9
-+#define CLK_INFRA_PWM_BSEL            10
-+#define CLK_INFRA_PCIE_SEL            11
-+#define CLK_INFRA_GPT_STA             12
-+#define CLK_INFRA_PWM_HCK             13
-+#define CLK_INFRA_PWM_STA             14
-+#define CLK_INFRA_PWM1_CK             15
-+#define CLK_INFRA_PWM2_CK             16
-+#define CLK_INFRA_PWM3_CK             17
-+#define CLK_INFRA_CQ_DMA_CK           18
-+#define CLK_INFRA_AUD_BUS_CK          19
-+#define CLK_INFRA_AUD_26M_CK          20
-+#define CLK_INFRA_AUD_L_CK            21
-+#define CLK_INFRA_AUD_AUD_CK          22
-+#define CLK_INFRA_AUD_EG2_CK          23
-+#define CLK_INFRA_DRAMC_26M_CK                24
-+#define CLK_INFRA_DBG_CK              25
-+#define CLK_INFRA_AP_DMA_CK           26
-+#define CLK_INFRA_SEJ_CK              27
-+#define CLK_INFRA_SEJ_13M_CK          28
-+#define CLK_INFRA_THERM_CK            29
-+#define CLK_INFRA_I2C0_CK             30
-+#define CLK_INFRA_UART0_CK            31
-+#define CLK_INFRA_UART1_CK            32
-+#define CLK_INFRA_UART2_CK            33
-+#define CLK_INFRA_SPI2_CK             34
-+#define CLK_INFRA_SPI2_HCK_CK         35
-+#define CLK_INFRA_NFI1_CK             36
-+#define CLK_INFRA_SPINFI1_CK          37
-+#define CLK_INFRA_NFI_HCK_CK          38
-+#define CLK_INFRA_SPI0_CK             39
-+#define CLK_INFRA_SPI1_CK             40
-+#define CLK_INFRA_SPI0_HCK_CK         41
-+#define CLK_INFRA_SPI1_HCK_CK         42
-+#define CLK_INFRA_FRTC_CK             43
-+#define CLK_INFRA_MSDC_CK             44
-+#define CLK_INFRA_MSDC_HCK_CK         45
-+#define CLK_INFRA_MSDC_133M_CK                46
-+#define CLK_INFRA_MSDC_66M_CK         47
-+#define CLK_INFRA_ADC_26M_CK          48
-+#define CLK_INFRA_ADC_FRC_CK          49
-+#define CLK_INFRA_FBIST2FPC_CK                50
-+#define CLK_INFRA_I2C_MCK_CK          51
-+#define CLK_INFRA_I2C_PCK_CK          52
-+#define CLK_INFRA_IUSB_133_CK         53
-+#define CLK_INFRA_IUSB_66M_CK         54
-+#define CLK_INFRA_IUSB_SYS_CK         55
-+#define CLK_INFRA_IUSB_CK             56
-+#define CLK_INFRA_IPCIE_CK            57
-+#define CLK_INFRA_IPCIE_PIPE_CK               58
-+#define CLK_INFRA_IPCIER_CK           59
-+#define CLK_INFRA_IPCIEB_CK           60
-+
-+/* APMIXEDSYS */
-+#define CLK_APMIXED_ARMPLL            0
-+#define CLK_APMIXED_NET2PLL           1
-+#define CLK_APMIXED_MMPLL             2
-+#define CLK_APMIXED_SGMPLL            3
-+#define CLK_APMIXED_WEDMCUPLL         4
-+#define CLK_APMIXED_NET1PLL           5
-+#define CLK_APMIXED_MPLL              6
-+#define CLK_APMIXED_APLL2             7
-+
-+/* SGMIISYS_0 */
-+#define CLK_SGM0_TX_EN                        0
-+#define CLK_SGM0_RX_EN                        1
-+#define CLK_SGM0_CK0_EN                       2
-+#define CLK_SGM0_CDR_CK0_EN           3
-+
-+/* SGMIISYS_1 */
-+#define CLK_SGM1_TX_EN                        0
-+#define CLK_SGM1_RX_EN                        1
-+#define CLK_SGM1_CK1_EN                       2
-+#define CLK_SGM1_CDR_CK1_EN           3
-+
-+/* ETHSYS */
-+#define CLK_ETH_FE_EN                 0
-+#define CLK_ETH_GP2_EN                        1
-+#define CLK_ETH_GP1_EN                        2
-+#define CLK_ETH_WOCPU0_EN             3
-+
-+#endif /* _DT_BINDINGS_CLK_MT7981_H */
diff --git a/target/linux/mediatek/patches-6.6/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch b/target/linux/mediatek/patches-6.6/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch
deleted file mode 100644 (file)
index f9dd94a..0000000
+++ /dev/null
@@ -1,932 +0,0 @@
-From 8efeeb9c8b4ecf4fb4a74be9403aba951403bbaa Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:34:24 +0000
-Subject: [PATCH] clk: mediatek: add MT7981 clock support
-
-Add MT7981 clock support, include topckgen, apmixedsys, infracfg and
-ethernet subsystem clocks.
-
-The drivers are based on clk-mt7981.c which can be found in MediaTek's
-SDK sources. To be fit for upstream inclusion the driver has been split
-into clock domains and the infracfg part has been significantly
-de-bloated by removing all the 1:1 factors (aliases).
-
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/8136eb5b2049177bc2f6d3e0f2aefecc342d626f.1674703830.git.daniel@makrotopia.org
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-[sboyd@kernel.org: Add module license]
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/Kconfig               |  17 +
- drivers/clk/mediatek/Makefile              |   4 +
- drivers/clk/mediatek/clk-mt7981-apmixed.c  | 102 +++++
- drivers/clk/mediatek/clk-mt7981-eth.c      | 118 ++++++
- drivers/clk/mediatek/clk-mt7981-infracfg.c | 207 ++++++++++
- drivers/clk/mediatek/clk-mt7981-topckgen.c | 422 +++++++++++++++++++++
- 6 files changed, 870 insertions(+)
- create mode 100644 drivers/clk/mediatek/clk-mt7981-apmixed.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-eth.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-infracfg.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-topckgen.c
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -381,6 +381,23 @@ config COMMON_CLK_MT7629_HIFSYS
-         This driver supports MediaTek MT7629 HIFSYS clocks providing
-         to PCI-E and USB.
-+config COMMON_CLK_MT7981
-+      bool "Clock driver for MediaTek MT7981"
-+      depends on ARCH_MEDIATEK || COMPILE_TEST
-+      select COMMON_CLK_MEDIATEK
-+      default ARCH_MEDIATEK
-+      help
-+        This driver supports MediaTek MT7981 basic clocks and clocks
-+        required for various peripherals found on this SoC.
-+
-+config COMMON_CLK_MT7981_ETHSYS
-+      tristate "Clock driver for MediaTek MT7981 ETHSYS"
-+      depends on COMMON_CLK_MT7981
-+      default COMMON_CLK_MT7981
-+      help
-+        This driver adds support for clocks for Ethernet and SGMII
-+        required on MediaTek MT7981 SoC.
-+
- config COMMON_CLK_MT7986
-       bool "Clock driver for MediaTek MT7986"
-       depends on ARCH_MEDIATEK || COMPILE_TEST
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -52,6 +52,10 @@ obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) +
- obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o
- obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
- obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-apmixed.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-topckgen.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-infracfg.o
-+obj-$(CONFIG_COMMON_CLK_MT7981_ETHSYS) += clk-mt7981-eth.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-apmixed.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-topckgen.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-infracfg.o
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-apmixed.c
-@@ -0,0 +1,102 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-gate.h"
-+#include "clk-mtk.h"
-+#include "clk-mux.h"
-+#include "clk-pll.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+#define MT7981_PLL_FMAX (2500UL * MHZ)
-+#define CON0_MT7981_RST_BAR BIT(27)
-+
-+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
-+               _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift,         \
-+               _div_table, _parent_name)                                     \
-+      {                                                                      \
-+              .id = _id, .name = _name, .reg = _reg, .pwr_reg = _pwr_reg,    \
-+              .en_mask = _en_mask, .flags = _flags,                          \
-+              .rst_bar_mask = CON0_MT7981_RST_BAR, .fmax = MT7981_PLL_FMAX,  \
-+              .pcwbits = _pcwbits, .pd_reg = _pd_reg, .pd_shift = _pd_shift, \
-+              .tuner_reg = _tuner_reg, .pcw_reg = _pcw_reg,                  \
-+              .pcw_shift = _pcw_shift, .div_table = _div_table,              \
-+              .parent_name = _parent_name,                                   \
-+      }
-+
-+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg,   \
-+          _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift)                       \
-+      PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
-+               _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, NULL,   \
-+               "clkxtal")
-+
-+static const struct mtk_pll_data plls[] = {
-+      PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001, PLL_AO,
-+          32, 0x0200, 4, 0, 0x0204, 0),
-+      PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x00000001, 0, 32,
-+          0x0210, 4, 0, 0x0214, 0),
-+      PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0220, 0x022C, 0x00000001, 0, 32,
-+          0x0220, 4, 0, 0x0224, 0),
-+      PLL(CLK_APMIXED_SGMPLL, "sgmpll", 0x0230, 0x023C, 0x00000001, 0, 32,
-+          0x0230, 4, 0, 0x0234, 0),
-+      PLL(CLK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0240, 0x024C, 0x00000001, 0, 32,
-+          0x0240, 4, 0, 0x0244, 0),
-+      PLL(CLK_APMIXED_NET1PLL, "net1pll", 0x0250, 0x025C, 0x00000001, 0, 32,
-+          0x0250, 4, 0, 0x0254, 0),
-+      PLL(CLK_APMIXED_MPLL, "mpll", 0x0260, 0x0270, 0x00000001, 0, 32,
-+          0x0260, 4, 0, 0x0264, 0),
-+      PLL(CLK_APMIXED_APLL2, "apll2", 0x0278, 0x0288, 0x00000001, 0, 32,
-+          0x0278, 4, 0, 0x027C, 0),
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_apmixed[] = {
-+      { .compatible = "mediatek,mt7981-apmixedsys", },
-+      { /* sentinel */ }
-+};
-+
-+static int clk_mt7981_apmixed_probe(struct platform_device *pdev)
-+{
-+      struct clk_hw_onecell_data *clk_data;
-+      struct device_node *node = pdev->dev.of_node;
-+      int r;
-+
-+      clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
-+      if (!clk_data)
-+              return -ENOMEM;
-+
-+      mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
-+
-+      r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+      if (r) {
-+              pr_err("%s(): could not register clock provider: %d\n",
-+                     __func__, r);
-+              goto free_apmixed_data;
-+      }
-+      return r;
-+
-+free_apmixed_data:
-+      mtk_free_clk_data(clk_data);
-+      return r;
-+}
-+
-+static struct platform_driver clk_mt7981_apmixed_drv = {
-+      .probe = clk_mt7981_apmixed_probe,
-+      .driver = {
-+              .name = "clk-mt7981-apmixed",
-+              .of_match_table = of_match_clk_mt7981_apmixed,
-+      },
-+};
-+builtin_platform_driver(clk_mt7981_apmixed_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-eth.c
-@@ -0,0 +1,118 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+
-+static const struct mtk_gate_regs sgmii0_cg_regs = {
-+      .set_ofs = 0xE4,
-+      .clr_ofs = 0xE4,
-+      .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII0(_id, _name, _parent, _shift) {    \
-+              .id = _id,                              \
-+              .name = _name,                          \
-+              .parent_name = _parent,                 \
-+              .regs = &sgmii0_cg_regs,                        \
-+              .shift = _shift,                        \
-+              .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+      }
-+
-+static const struct mtk_gate sgmii0_clks[] __initconst = {
-+      GATE_SGMII0(CLK_SGM0_TX_EN, "sgm0_tx_en", "usb_tx250m", 2),
-+      GATE_SGMII0(CLK_SGM0_RX_EN, "sgm0_rx_en", "usb_eq_rx250m", 3),
-+      GATE_SGMII0(CLK_SGM0_CK0_EN, "sgm0_ck0_en", "usb_ln0", 4),
-+      GATE_SGMII0(CLK_SGM0_CDR_CK0_EN, "sgm0_cdr_ck0_en", "usb_cdr", 5),
-+};
-+
-+static const struct mtk_gate_regs sgmii1_cg_regs = {
-+      .set_ofs = 0xE4,
-+      .clr_ofs = 0xE4,
-+      .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII1(_id, _name, _parent, _shift) {    \
-+              .id = _id,                              \
-+              .name = _name,                          \
-+              .parent_name = _parent,                 \
-+              .regs = &sgmii1_cg_regs,                        \
-+              .shift = _shift,                        \
-+              .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+      }
-+
-+static const struct mtk_gate sgmii1_clks[] __initconst = {
-+      GATE_SGMII1(CLK_SGM1_TX_EN, "sgm1_tx_en", "usb_tx250m", 2),
-+      GATE_SGMII1(CLK_SGM1_RX_EN, "sgm1_rx_en", "usb_eq_rx250m", 3),
-+      GATE_SGMII1(CLK_SGM1_CK1_EN, "sgm1_ck1_en", "usb_ln0", 4),
-+      GATE_SGMII1(CLK_SGM1_CDR_CK1_EN, "sgm1_cdr_ck1_en", "usb_cdr", 5),
-+};
-+
-+static const struct mtk_gate_regs eth_cg_regs = {
-+      .set_ofs = 0x30,
-+      .clr_ofs = 0x30,
-+      .sta_ofs = 0x30,
-+};
-+
-+#define GATE_ETH(_id, _name, _parent, _shift) {       \
-+              .id = _id,                              \
-+              .name = _name,                          \
-+              .parent_name = _parent,                 \
-+              .regs = &eth_cg_regs,                   \
-+              .shift = _shift,                        \
-+              .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+      }
-+
-+static const struct mtk_gate eth_clks[] __initconst = {
-+      GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "netsys_2x", 6),
-+      GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "sgm_325m", 7),
-+      GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "sgm_325m", 8),
-+      GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", "netsys_wed_mcu", 15),
-+};
-+
-+static const struct mtk_clk_desc eth_desc = {
-+      .clks = eth_clks,
-+      .num_clks = ARRAY_SIZE(eth_clks),
-+};
-+
-+static const struct mtk_clk_desc sgmii0_desc = {
-+      .clks = sgmii0_clks,
-+      .num_clks = ARRAY_SIZE(sgmii0_clks),
-+};
-+
-+static const struct mtk_clk_desc sgmii1_desc = {
-+      .clks = sgmii1_clks,
-+      .num_clks = ARRAY_SIZE(sgmii1_clks),
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_eth[] = {
-+      { .compatible = "mediatek,mt7981-ethsys", .data = &eth_desc },
-+      { .compatible = "mediatek,mt7981-sgmiisys_0", .data = &sgmii0_desc },
-+      { .compatible = "mediatek,mt7981-sgmiisys_1", .data = &sgmii1_desc },
-+      { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_eth_drv = {
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-+      .driver = {
-+              .name = "clk-mt7981-eth",
-+              .of_match_table = of_match_clk_mt7981_eth,
-+      },
-+};
-+module_platform_driver(clk_mt7981_eth_drv);
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-infracfg.c
-@@ -0,0 +1,207 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-mux.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+static DEFINE_SPINLOCK(mt7981_clk_lock);
-+
-+static const struct mtk_fixed_factor infra_divs[] = {
-+      FACTOR(CLK_INFRA_66M_MCK, "infra_66m_mck", "sysaxi_sel", 1, 2),
-+};
-+
-+static const char *const infra_uart_parent[] __initconst = { "csw_f26m_sel",
-+                                                              "uart_sel" };
-+
-+static const char *const infra_spi0_parents[] __initconst = { "i2c_sel",
-+                                                            "spi_sel" };
-+
-+static const char *const infra_spi1_parents[] __initconst = { "i2c_sel",
-+                                                            "spim_mst_sel" };
-+
-+static const char *const infra_pwm1_parents[] __initconst = { "pwm_sel" };
-+
-+static const char *const infra_pwm_bsel_parents[] __initconst = {
-+      "cb_rtc_32p7k", "csw_f26m_sel", "infra_66m_mck", "pwm_sel"
-+};
-+
-+static const char *const infra_pcie_parents[] __initconst = {
-+      "cb_rtc_32p7k", "csw_f26m_sel", "cb_cksq_40m", "pextp_tl_ck_sel"
-+};
-+
-+static const struct mtk_mux infra_muxes[] = {
-+      /* MODULE_CLK_SEL_0 */
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART0_SEL, "infra_uart0_sel",
-+                           infra_uart_parent, 0x0018, 0x0010, 0x0014, 0, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART1_SEL, "infra_uart1_sel",
-+                           infra_uart_parent, 0x0018, 0x0010, 0x0014, 1, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART2_SEL, "infra_uart2_sel",
-+                           infra_uart_parent, 0x0018, 0x0010, 0x0014, 2, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI0_SEL, "infra_spi0_sel",
-+                           infra_spi0_parents, 0x0018, 0x0010, 0x0014, 4, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI1_SEL, "infra_spi1_sel",
-+                           infra_spi1_parents, 0x0018, 0x0010, 0x0014, 5, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI2_SEL, "infra_spi2_sel",
-+                           infra_spi0_parents, 0x0018, 0x0010, 0x0014, 6, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel",
-+                           infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 9, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel",
-+                           infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 11, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM3_SEL, "infra_pwm3_sel",
-+                           infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 15, 1,
-+                           -1, -1, -1),
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel",
-+                           infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 13,
-+                           2, -1, -1, -1),
-+      /* MODULE_CLK_SEL_1 */
-+      MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_SEL, "infra_pcie_sel",
-+                           infra_pcie_parents, 0x0028, 0x0020, 0x0024, 0, 2,
-+                           -1, -1, -1),
-+};
-+
-+static const struct mtk_gate_regs infra0_cg_regs = {
-+      .set_ofs = 0x40,
-+      .clr_ofs = 0x44,
-+      .sta_ofs = 0x48,
-+};
-+
-+static const struct mtk_gate_regs infra1_cg_regs = {
-+      .set_ofs = 0x50,
-+      .clr_ofs = 0x54,
-+      .sta_ofs = 0x58,
-+};
-+
-+static const struct mtk_gate_regs infra2_cg_regs = {
-+      .set_ofs = 0x60,
-+      .clr_ofs = 0x64,
-+      .sta_ofs = 0x68,
-+};
-+
-+#define GATE_INFRA0(_id, _name, _parent, _shift)                               \
-+      {                                                                      \
-+              .id = _id, .name = _name, .parent_name = _parent,              \
-+              .regs = &infra0_cg_regs, .shift = _shift,                      \
-+              .ops = &mtk_clk_gate_ops_setclr,                               \
-+      }
-+
-+#define GATE_INFRA1(_id, _name, _parent, _shift)                               \
-+      {                                                                      \
-+              .id = _id, .name = _name, .parent_name = _parent,              \
-+              .regs = &infra1_cg_regs, .shift = _shift,                      \
-+              .ops = &mtk_clk_gate_ops_setclr,                               \
-+      }
-+
-+#define GATE_INFRA2(_id, _name, _parent, _shift)                               \
-+      {                                                                      \
-+              .id = _id, .name = _name, .parent_name = _parent,              \
-+              .regs = &infra2_cg_regs, .shift = _shift,                      \
-+              .ops = &mtk_clk_gate_ops_setclr,                               \
-+      }
-+
-+static const struct mtk_gate infra_clks[] = {
-+      /* INFRA0 */
-+      GATE_INFRA0(CLK_INFRA_GPT_STA, "infra_gpt_sta", "infra_66m_mck", 0),
-+      GATE_INFRA0(CLK_INFRA_PWM_HCK, "infra_pwm_hck", "infra_66m_mck", 1),
-+      GATE_INFRA0(CLK_INFRA_PWM_STA, "infra_pwm_sta", "infra_pwm_bsel", 2),
-+      GATE_INFRA0(CLK_INFRA_PWM1_CK, "infra_pwm1", "infra_pwm1_sel", 3),
-+      GATE_INFRA0(CLK_INFRA_PWM2_CK, "infra_pwm2", "infra_pwm2_sel", 4),
-+      GATE_INFRA0(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", "sysaxi", 6),
-+
-+      GATE_INFRA0(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", "sysaxi", 8),
-+      GATE_INFRA0(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", "csw_f26m_sel", 9),
-+      GATE_INFRA0(CLK_INFRA_AUD_L_CK, "infra_aud_l", "aud_l", 10),
-+      GATE_INFRA0(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", "a1sys", 11),
-+      GATE_INFRA0(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", "a_tuner", 13),
-+      GATE_INFRA0(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", "csw_f26m_sel",
-+                  14),
-+      GATE_INFRA0(CLK_INFRA_DBG_CK, "infra_dbg", "infra_66m_mck", 15),
-+      GATE_INFRA0(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", "infra_66m_mck", 16),
-+      GATE_INFRA0(CLK_INFRA_SEJ_CK, "infra_sej", "infra_66m_mck", 24),
-+      GATE_INFRA0(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", "csw_f26m_sel", 25),
-+      GATE_INFRA0(CLK_INFRA_PWM3_CK, "infra_pwm3", "infra_pwm3_sel", 27),
-+      /* INFRA1 */
-+      GATE_INFRA1(CLK_INFRA_THERM_CK, "infra_therm", "csw_f26m_sel", 0),
-+      GATE_INFRA1(CLK_INFRA_I2C0_CK, "infra_i2c0", "i2c_bck", 1),
-+      GATE_INFRA1(CLK_INFRA_UART0_CK, "infra_uart0", "infra_uart0_sel", 2),
-+      GATE_INFRA1(CLK_INFRA_UART1_CK, "infra_uart1", "infra_uart1_sel", 3),
-+      GATE_INFRA1(CLK_INFRA_UART2_CK, "infra_uart2", "infra_uart2_sel", 4),
-+      GATE_INFRA1(CLK_INFRA_SPI2_CK, "infra_spi2", "infra_spi2_sel", 6),
-+      GATE_INFRA1(CLK_INFRA_SPI2_HCK_CK, "infra_spi2_hck", "infra_66m_mck", 7),
-+      GATE_INFRA1(CLK_INFRA_NFI1_CK, "infra_nfi1", "nfi1x", 8),
-+      GATE_INFRA1(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", "spinfi_bck", 9),
-+      GATE_INFRA1(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", "infra_66m_mck", 10),
-+      GATE_INFRA1(CLK_INFRA_SPI0_CK, "infra_spi0", "infra_spi0_sel", 11),
-+      GATE_INFRA1(CLK_INFRA_SPI1_CK, "infra_spi1", "infra_spi1_sel", 12),
-+      GATE_INFRA1(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", "infra_66m_mck",
-+                  13),
-+      GATE_INFRA1(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", "infra_66m_mck",
-+                  14),
-+      GATE_INFRA1(CLK_INFRA_FRTC_CK, "infra_frtc", "cb_rtc_32k", 15),
-+      GATE_INFRA1(CLK_INFRA_MSDC_CK, "infra_msdc", "emmc_400m", 16),
-+      GATE_INFRA1(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck", "emmc_208m", 17),
-+      GATE_INFRA1(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m", "sysaxi", 18),
-+      GATE_INFRA1(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", "sysaxi", 19),
-+      GATE_INFRA1(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", "infra_adc_frc", 20),
-+      GATE_INFRA1(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m", 21),
-+      GATE_INFRA1(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", "nfi1x", 23),
-+      GATE_INFRA1(CLK_INFRA_I2C_MCK_CK, "infra_i2c_mck", "sysaxi", 25),
-+      GATE_INFRA1(CLK_INFRA_I2C_PCK_CK, "infra_i2c_pck", "infra_66m_mck", 26),
-+      /* INFRA2 */
-+      GATE_INFRA2(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", "sysaxi", 0),
-+      GATE_INFRA2(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", "sysaxi", 1),
-+      GATE_INFRA2(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", "u2u3_sys", 2),
-+      GATE_INFRA2(CLK_INFRA_IUSB_CK, "infra_iusb", "u2u3_ref", 3),
-+      GATE_INFRA2(CLK_INFRA_IPCIE_CK, "infra_ipcie", "pextp_tl", 12),
-+      GATE_INFRA2(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", "cb_cksq_40m",
-+                  13),
-+      GATE_INFRA2(CLK_INFRA_IPCIER_CK, "infra_ipcier", "csw_f26m", 14),
-+      GATE_INFRA2(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", "sysaxi", 15),
-+};
-+
-+static const struct mtk_clk_desc infracfg_desc = {
-+      .factor_clks = infra_divs,
-+      .num_factor_clks = ARRAY_SIZE(infra_divs),
-+      .mux_clks = infra_muxes,
-+      .num_mux_clks = ARRAY_SIZE(infra_muxes),
-+      .clks = infra_clks,
-+      .num_clks = ARRAY_SIZE(infra_clks),
-+      .clk_lock = &mt7981_clk_lock,
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_infracfg[] = {
-+      { .compatible = "mediatek,mt7981-infracfg", .data = &infracfg_desc },
-+      { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_infracfg_drv = {
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-+      .driver = {
-+              .name = "clk-mt7981-infracfg",
-+              .of_match_table = of_match_clk_mt7981_infracfg,
-+      },
-+};
-+builtin_platform_driver(clk_mt7981_infracfg_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c
-@@ -0,0 +1,422 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ */
-+
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-mux.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+static DEFINE_SPINLOCK(mt7981_clk_lock);
-+
-+static const struct mtk_fixed_factor top_divs[] = {
-+      FACTOR(CLK_TOP_CB_CKSQ_40M, "cb_cksq_40m", "clkxtal", 1, 1),
-+      FACTOR(CLK_TOP_CB_M_416M, "cb_m_416m", "mpll", 1, 1),
-+      FACTOR(CLK_TOP_CB_M_D2, "cb_m_d2", "mpll", 1, 2),
-+      FACTOR(CLK_TOP_CB_M_D3, "cb_m_d3", "mpll", 1, 3),
-+      FACTOR(CLK_TOP_M_D3_D2, "m_d3_d2", "mpll", 1, 2),
-+      FACTOR(CLK_TOP_CB_M_D4, "cb_m_d4", "mpll", 1, 4),
-+      FACTOR(CLK_TOP_CB_M_D8, "cb_m_d8", "mpll", 1, 8),
-+      FACTOR(CLK_TOP_M_D8_D2, "m_d8_d2", "mpll", 1, 16),
-+      FACTOR(CLK_TOP_CB_MM_720M, "cb_mm_720m", "mmpll", 1, 1),
-+      FACTOR(CLK_TOP_CB_MM_D2, "cb_mm_d2", "mmpll", 1, 2),
-+      FACTOR(CLK_TOP_CB_MM_D3, "cb_mm_d3", "mmpll", 1, 3),
-+      FACTOR(CLK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", "mmpll", 1, 15),
-+      FACTOR(CLK_TOP_CB_MM_D4, "cb_mm_d4", "mmpll", 1, 4),
-+      FACTOR(CLK_TOP_CB_MM_D6, "cb_mm_d6", "mmpll", 1, 6),
-+      FACTOR(CLK_TOP_MM_D6_D2, "mm_d6_d2", "mmpll", 1, 12),
-+      FACTOR(CLK_TOP_CB_MM_D8, "cb_mm_d8", "mmpll", 1, 8),
-+      FACTOR(CLK_TOP_CB_APLL2_196M, "cb_apll2_196m", "apll2", 1, 1),
-+      FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2", 1, 2),
-+      FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4),
-+      FACTOR(CLK_TOP_NET1_2500M, "net1_2500m", "net1pll", 1, 1),
-+      FACTOR(CLK_TOP_CB_NET1_D4, "cb_net1_d4", "net1pll", 1, 4),
-+      FACTOR(CLK_TOP_CB_NET1_D5, "cb_net1_d5", "net1pll", 1, 5),
-+      FACTOR(CLK_TOP_NET1_D5_D2, "net1_d5_d2", "net1pll", 1, 10),
-+      FACTOR(CLK_TOP_NET1_D5_D4, "net1_d5_d4", "net1pll", 1, 20),
-+      FACTOR(CLK_TOP_CB_NET1_D8, "cb_net1_d8", "net1pll", 1, 8),
-+      FACTOR(CLK_TOP_NET1_D8_D2, "net1_d8_d2", "net1pll", 1, 16),
-+      FACTOR(CLK_TOP_NET1_D8_D4, "net1_d8_d4", "net1pll", 1, 32),
-+      FACTOR(CLK_TOP_CB_NET2_800M, "cb_net2_800m", "net2pll", 1, 1),
-+      FACTOR(CLK_TOP_CB_NET2_D2, "cb_net2_d2", "net2pll", 1, 2),
-+      FACTOR(CLK_TOP_CB_NET2_D4, "cb_net2_d4", "net2pll", 1, 4),
-+      FACTOR(CLK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
-+      FACTOR(CLK_TOP_NET2_D4_D4, "net2_d4_d4", "net2pll", 1, 16),
-+      FACTOR(CLK_TOP_CB_NET2_D6, "cb_net2_d6", "net2pll", 1, 6),
-+      FACTOR(CLK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m", "wedmcupll", 1, 1),
-+      FACTOR(CLK_TOP_CB_SGM_325M, "cb_sgm_325m", "sgmpll", 1, 1),
-+      FACTOR(CLK_TOP_CKSQ_40M_D2, "cksq_40m_d2", "cb_cksq_40m", 1, 2),
-+      FACTOR(CLK_TOP_CB_RTC_32K, "cb_rtc_32k", "cb_cksq_40m", 1, 1250),
-+      FACTOR(CLK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", "cb_cksq_40m", 1, 1220),
-+      FACTOR(CLK_TOP_USB_TX250M, "usb_tx250m", "cb_cksq_40m", 1, 1),
-+      FACTOR(CLK_TOP_FAUD, "faud", "aud_sel", 1, 1),
-+      FACTOR(CLK_TOP_NFI1X, "nfi1x", "nfi1x_sel", 1, 1),
-+      FACTOR(CLK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", "cb_cksq_40m", 1, 1),
-+      FACTOR(CLK_TOP_USB_CDR_CK, "usb_cdr", "cb_cksq_40m", 1, 1),
-+      FACTOR(CLK_TOP_USB_LN0_CK, "usb_ln0", "cb_cksq_40m", 1, 1),
-+      FACTOR(CLK_TOP_SPINFI_BCK, "spinfi_bck", "spinfi_sel", 1, 1),
-+      FACTOR(CLK_TOP_SPI, "spi", "spi_sel", 1, 1),
-+      FACTOR(CLK_TOP_SPIM_MST, "spim_mst", "spim_mst_sel", 1, 1),
-+      FACTOR(CLK_TOP_UART_BCK, "uart_bck", "uart_sel", 1, 1),
-+      FACTOR(CLK_TOP_PWM_BCK, "pwm_bck", "pwm_sel", 1, 1),
-+      FACTOR(CLK_TOP_I2C_BCK, "i2c_bck", "i2c_sel", 1, 1),
-+      FACTOR(CLK_TOP_PEXTP_TL, "pextp_tl", "pextp_tl_ck_sel", 1, 1),
-+      FACTOR(CLK_TOP_EMMC_208M, "emmc_208m", "emmc_208m_sel", 1, 1),
-+      FACTOR(CLK_TOP_EMMC_400M, "emmc_400m", "emmc_400m_sel", 1, 1),
-+      FACTOR(CLK_TOP_DRAMC_REF, "dramc_ref", "dramc_sel", 1, 1),
-+      FACTOR(CLK_TOP_DRAMC_MD32, "dramc_md32", "dramc_md32_sel", 1, 1),
-+      FACTOR(CLK_TOP_SYSAXI, "sysaxi", "sysaxi_sel", 1, 1),
-+      FACTOR(CLK_TOP_SYSAPB, "sysapb", "sysapb_sel", 1, 1),
-+      FACTOR(CLK_TOP_ARM_DB_MAIN, "arm_db_main", "arm_db_main_sel", 1, 1),
-+      FACTOR(CLK_TOP_AP2CNN_HOST, "ap2cnn_host", "ap2cnn_host_sel", 1, 1),
-+      FACTOR(CLK_TOP_NETSYS, "netsys", "netsys_sel", 1, 1),
-+      FACTOR(CLK_TOP_NETSYS_500M, "netsys_500m", "netsys_500m_sel", 1, 1),
-+      FACTOR(CLK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu", "netsys_mcu_sel", 1, 1),
-+      FACTOR(CLK_TOP_NETSYS_2X, "netsys_2x", "netsys_2x_sel", 1, 1),
-+      FACTOR(CLK_TOP_SGM_325M, "sgm_325m", "sgm_325m_sel", 1, 1),
-+      FACTOR(CLK_TOP_SGM_REG, "sgm_reg", "sgm_reg_sel", 1, 1),
-+      FACTOR(CLK_TOP_F26M, "csw_f26m", "csw_f26m_sel", 1, 1),
-+      FACTOR(CLK_TOP_EIP97B, "eip97b", "eip97b_sel", 1, 1),
-+      FACTOR(CLK_TOP_USB3_PHY, "usb3_phy", "usb3_phy_sel", 1, 1),
-+      FACTOR(CLK_TOP_AUD, "aud", "faud", 1, 1),
-+      FACTOR(CLK_TOP_A1SYS, "a1sys", "a1sys_sel", 1, 1),
-+      FACTOR(CLK_TOP_AUD_L, "aud_l", "aud_l_sel", 1, 1),
-+      FACTOR(CLK_TOP_A_TUNER, "a_tuner", "a_tuner_sel", 1, 1),
-+      FACTOR(CLK_TOP_U2U3_REF, "u2u3_ref", "u2u3_sel", 1, 1),
-+      FACTOR(CLK_TOP_U2U3_SYS, "u2u3_sys", "u2u3_sys_sel", 1, 1),
-+      FACTOR(CLK_TOP_U2U3_XHCI, "u2u3_xhci", "u2u3_xhci_sel", 1, 1),
-+      FACTOR(CLK_TOP_USB_FRMCNT, "usb_frmcnt", "usb_frmcnt_sel", 1, 1),
-+};
-+
-+static const char * const nfi1x_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_mm_d4",
-+      "net1_d8_d2",
-+      "cb_net2_d6",
-+      "cb_m_d4",
-+      "cb_mm_d8",
-+      "net1_d8_d4",
-+      "cb_m_d8"
-+};
-+
-+static const char * const spinfi_parents[] __initconst = {
-+      "cksq_40m_d2",
-+      "cb_cksq_40m",
-+      "net1_d5_d4",
-+      "cb_m_d4",
-+      "cb_mm_d8",
-+      "net1_d8_d4",
-+      "mm_d6_d2",
-+      "cb_m_d8"
-+};
-+
-+static const char * const spi_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_m_d2",
-+      "cb_mm_d4",
-+      "net1_d8_d2",
-+      "cb_net2_d6",
-+      "net1_d5_d4",
-+      "cb_m_d4",
-+      "net1_d8_d4"
-+};
-+
-+static const char * const uart_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_m_d8",
-+      "m_d8_d2"
-+};
-+
-+static const char * const pwm_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d8_d2",
-+      "net1_d5_d4",
-+      "cb_m_d4",
-+      "m_d8_d2",
-+      "cb_rtc_32k"
-+};
-+
-+static const char * const i2c_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d5_d4",
-+      "cb_m_d4",
-+      "net1_d8_d4"
-+};
-+
-+static const char * const pextp_tl_ck_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d5_d4",
-+      "cb_m_d4",
-+      "cb_rtc_32k"
-+};
-+
-+static const char * const emmc_208m_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_m_d2",
-+      "cb_net2_d4",
-+      "cb_apll2_196m",
-+      "cb_mm_d4",
-+      "net1_d8_d2",
-+      "cb_mm_d6"
-+};
-+
-+static const char * const emmc_400m_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net2_d2",
-+      "cb_mm_d2",
-+      "cb_net2_d2"
-+};
-+
-+static const char * const csw_f26m_parents[] __initconst = {
-+      "cksq_40m_d2",
-+      "m_d8_d2"
-+};
-+
-+static const char * const dramc_md32_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_m_d2",
-+      "cb_wedmcu_208m"
-+};
-+
-+static const char * const sysaxi_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d8_d2"
-+};
-+
-+static const char * const sysapb_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "m_d3_d2"
-+};
-+
-+static const char * const arm_db_main_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net2_d6"
-+};
-+
-+static const char * const ap2cnn_host_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d8_d4"
-+};
-+
-+static const char * const netsys_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_mm_d2"
-+};
-+
-+static const char * const netsys_500m_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net1_d5"
-+};
-+
-+static const char * const netsys_mcu_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_mm_720m",
-+      "cb_net1_d4",
-+      "cb_net1_d5",
-+      "cb_m_416m"
-+};
-+
-+static const char * const netsys_2x_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net2_800m",
-+      "cb_mm_720m"
-+};
-+
-+static const char * const sgm_325m_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_sgm_325m"
-+};
-+
-+static const char * const sgm_reg_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net2_d4"
-+};
-+
-+static const char * const eip97b_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_net1_d5",
-+      "cb_m_416m",
-+      "cb_mm_d2",
-+      "net1_d5_d2"
-+};
-+
-+static const char * const aud_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_apll2_196m"
-+};
-+
-+static const char * const a1sys_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "apll2_d4"
-+};
-+
-+static const char * const aud_l_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_apll2_196m",
-+      "m_d8_d2"
-+};
-+
-+static const char * const a_tuner_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "apll2_d4",
-+      "m_d8_d2"
-+};
-+
-+static const char * const u2u3_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "m_d8_d2"
-+};
-+
-+static const char * const u2u3_sys_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "net1_d5_d4"
-+};
-+
-+static const char * const usb_frmcnt_parents[] __initconst = {
-+      "cb_cksq_40m",
-+      "cb_mm_d3_d5"
-+};
-+
-+static const struct mtk_mux top_muxes[] = {
-+      /* CLK_CFG_0 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents,
-+                           0x000, 0x004, 0x008, 0, 3, 7, 0x1C0, 0),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents,
-+                           0x000, 0x004, 0x008, 8, 3, 15, 0x1C0, 1),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI_SEL, "spi_sel", spi_parents,
-+                           0x000, 0x004, 0x008, 16, 3, 23, 0x1C0, 2),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents,
-+                           0x000, 0x004, 0x008, 24, 3, 31, 0x1C0, 3),
-+      /* CLK_CFG_1 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
-+                           0x010, 0x014, 0x018, 0, 2, 7, 0x1C0, 4),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
-+                           0x010, 0x014, 0x018, 8, 3, 15, 0x1C0, 5),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents,
-+                           0x010, 0x014, 0x018, 16, 2, 23, 0x1C0, 6),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel",
-+                           pextp_tl_ck_parents, 0x010, 0x014, 0x018, 24, 2, 31,
-+                           0x1C0, 7),
-+      /* CLK_CFG_2 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_208M_SEL, "emmc_208m_sel",
-+                           emmc_208m_parents, 0x020, 0x024, 0x028, 0, 3, 7,
-+                           0x1C0, 8),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel",
-+                           emmc_400m_parents, 0x020, 0x024, 0x028, 8, 2, 15,
-+                           0x1C0, 9),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel",
-+                                 csw_f26m_parents, 0x020, 0x024, 0x028, 16, 1, 23,
-+                                 0x1C0, 10,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel",
-+                                 csw_f26m_parents, 0x020, 0x024, 0x028, 24, 1,
-+                                 31, 0x1C0, 11,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      /* CLK_CFG_3 */
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
-+                                 dramc_md32_parents, 0x030, 0x034, 0x038, 0, 2,
-+                                 7, 0x1C0, 12,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel",
-+                                 sysaxi_parents, 0x030, 0x034, 0x038, 8, 1, 15,
-+                                 0x1C0, 13,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel",
-+                                 sysapb_parents, 0x030, 0x034, 0x038, 16, 1,
-+                                 23, 0x1C0, 14,
-+                                 CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
-+                           arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1, 31,
-+                           0x1C0, 15),
-+      /* CLK_CFG_4 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel",
-+                           ap2cnn_host_parents, 0x040, 0x044, 0x048, 0, 1, 7,
-+                           0x1C0, 16),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents,
-+                           0x040, 0x044, 0x048, 8, 1, 15, 0x1C0, 17),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel",
-+                           netsys_500m_parents, 0x040, 0x044, 0x048, 16, 1, 23,
-+                           0x1C0, 18),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel",
-+                           netsys_mcu_parents, 0x040, 0x044, 0x048, 24, 3, 31,
-+                           0x1C0, 19),
-+      /* CLK_CFG_5 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel",
-+                           netsys_2x_parents, 0x050, 0x054, 0x058, 0, 2, 7,
-+                           0x1C0, 20),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
-+                           sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
-+                           0x1C0, 21),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-+                           0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents,
-+                           0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23),
-+      /* CLK_CFG_6 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel",
-+                           csw_f26m_parents, 0x060, 0x064, 0x068, 0, 1,
-+                           7, 0x1C0, 24),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x060,
-+                           0x064, 0x068, 8, 1, 15, 0x1C0, 25),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
-+                           0x060, 0x064, 0x068, 16, 1, 23, 0x1C0, 26),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
-+                           0x060, 0x064, 0x068, 24, 2, 31, 0x1C0, 27),
-+      /* CLK_CFG_7 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel",
-+                           a_tuner_parents, 0x070, 0x074, 0x078, 0, 2, 7,
-+                           0x1C0, 28),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SEL, "u2u3_sel", u2u3_parents, 0x070,
-+                           0x074, 0x078, 8, 1, 15, 0x1C0, 29),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel",
-+                           u2u3_sys_parents, 0x070, 0x074, 0x078, 16, 1, 23,
-+                           0x1C0, 30),
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel",
-+                           u2u3_sys_parents, 0x070, 0x074, 0x078, 24, 1, 31,
-+                           0x1C4, 0),
-+      /* CLK_CFG_8 */
-+      MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel",
-+                           usb_frmcnt_parents, 0x080, 0x084, 0x088, 0, 1, 7,
-+                           0x1C4, 1),
-+};
-+
-+static struct mtk_composite top_aud_divs[] = {
-+      DIV_GATE(CLK_TOP_AUD_I2S_M, "aud_i2s_m", "aud",
-+              0x0420, 0, 0x0420, 8, 8),
-+};
-+
-+static const struct mtk_clk_desc topck_desc = {
-+      .factor_clks = top_divs,
-+      .num_factor_clks = ARRAY_SIZE(top_divs),
-+      .mux_clks = top_muxes,
-+      .num_mux_clks = ARRAY_SIZE(top_muxes),
-+      .composite_clks = top_aud_divs,
-+      .num_composite_clks = ARRAY_SIZE(top_aud_divs),
-+      .clk_lock = &mt7981_clk_lock,
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_topckgen[] = {
-+      { .compatible = "mediatek,mt7981-topckgen", .data = &topck_desc },
-+      { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_topckgen_drv = {
-+      .probe = mtk_clk_simple_probe,
-+      .remove = mtk_clk_simple_remove,
-+      .driver = {
-+              .name = "clk-mt7981-topckgen",
-+              .of_match_table = of_match_clk_mt7981_topckgen,
-+      },
-+};
-+builtin_platform_driver(clk_mt7981_topckgen_drv);
diff --git a/target/linux/mediatek/patches-6.6/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch b/target/linux/mediatek/patches-6.6/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch
deleted file mode 100644 (file)
index ad4ecdf..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
-From cc4d9e0c77494fcf6bccbc57e23db0007cf681b7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:33:46 +0000
-Subject: [PATCH] dt-bindings: clock: Add compatibles for MT7981
-
-Add compatible string for MT7981 to existing bindings at
- - mediatek,apmixedsys.yaml
- - mediatek,topckgen.yaml
- - mediatek,ethsys.txt
- - mediatek,infracfg.yaml
- - mediatek,sgmiisys.txt
-
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/cc85ee470c781ff4013f6c21c92c0a21574b12b2.1674703830.git.daniel@makrotopia.org
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt        | 1 +
- .../devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml     | 1 +
- .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt      | 2 ++
- .../devicetree/bindings/clock/mediatek,apmixedsys.yaml          | 1 +
- Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml  | 1 +
- 5 files changed, 6 insertions(+)
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-@@ -10,6 +10,7 @@ Required Properties:
-       - "mediatek,mt7622-ethsys", "syscon"
-       - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
-       - "mediatek,mt7629-ethsys", "syscon"
-+      - "mediatek,mt7981-ethsys", "syscon"
-       - "mediatek,mt7986-ethsys", "syscon"
- - #clock-cells: Must be 1
- - #reset-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
-@@ -28,6 +28,7 @@ properties:
-               - mediatek,mt6797-infracfg
-               - mediatek,mt7622-infracfg
-               - mediatek,mt7629-infracfg
-+              - mediatek,mt7981-infracfg
-               - mediatek,mt7986-infracfg
-               - mediatek,mt8135-infracfg
-               - mediatek,mt8167-infracfg
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-@@ -8,6 +8,8 @@ Required Properties:
- - compatible: Should be:
-       - "mediatek,mt7622-sgmiisys", "syscon"
-       - "mediatek,mt7629-sgmiisys", "syscon"
-+      - "mediatek,mt7981-sgmiisys_0", "syscon"
-+      - "mediatek,mt7981-sgmiisys_1", "syscon"
-       - "mediatek,mt7986-sgmiisys_0", "syscon"
-       - "mediatek,mt7986-sgmiisys_1", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
-+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
-@@ -20,6 +20,7 @@ properties:
-       - enum:
-           - mediatek,mt6797-apmixedsys
-           - mediatek,mt7622-apmixedsys
-+          - mediatek,mt7981-apmixedsys
-           - mediatek,mt7986-apmixedsys
-           - mediatek,mt8135-apmixedsys
-           - mediatek,mt8173-apmixedsys
---- a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
-+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
-@@ -35,6 +35,7 @@ properties:
-               - mediatek,mt6779-topckgen
-               - mediatek,mt6795-topckgen
-               - mediatek,mt7629-topckgen
-+              - mediatek,mt7981-topckgen
-               - mediatek,mt7986-topckgen
-               - mediatek,mt8167-topckgen
-               - mediatek,mt8183-topckgen
diff --git a/target/linux/mediatek/patches-6.6/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch b/target/linux/mediatek/patches-6.6/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch
deleted file mode 100644 (file)
index 48d3d4e..0000000
+++ /dev/null
@@ -1,107 +0,0 @@
-From d4f08a703565abf47baa5a77d05365cf4598d55c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:56:52 +0000
-Subject: [PATCH 1/2] dt-bindings: arm: mediatek: sgmiisys: Convert to DT
- schema
-
-Convert mediatek,sgmiiisys bindings to DT schema format.
-Add maintainer Matthias Brugger, no maintainers were listed in the
-original documentation.
-As this node is also referenced by the Ethernet controller and used
-as SGMII PCS add this fact to the description.
-Move the file to Documentation/devicetree/bindings/net/pcs/ which seems
-more appropriate given that the great majority of registers are related
-to SGMII PCS functionality and only one register represents clock bits.
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- .../arm/mediatek/mediatek,sgmiisys.txt        | 27 ----------
- .../bindings/net/pcs/mediatek,sgmiisys.yaml   | 49 +++++++++++++++++++
- 2 files changed, 49 insertions(+), 27 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
- create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-+++ /dev/null
-@@ -1,27 +0,0 @@
--MediaTek SGMIISYS controller
--============================
--
--The MediaTek SGMIISYS controller provides various clocks to the system.
--
--Required Properties:
--
--- compatible: Should be:
--      - "mediatek,mt7622-sgmiisys", "syscon"
--      - "mediatek,mt7629-sgmiisys", "syscon"
--      - "mediatek,mt7981-sgmiisys_0", "syscon"
--      - "mediatek,mt7981-sgmiisys_1", "syscon"
--      - "mediatek,mt7986-sgmiisys_0", "syscon"
--      - "mediatek,mt7986-sgmiisys_1", "syscon"
--- #clock-cells: Must be 1
--
--The SGMIISYS controller uses the common clk binding from
--Documentation/devicetree/bindings/clock/clock-bindings.txt
--The available clocks are defined in dt-bindings/clock/mt*-clk.h.
--
--Example:
--
--sgmiisys: sgmiisys@1b128000 {
--      compatible = "mediatek,mt7622-sgmiisys", "syscon";
--      reg = <0 0x1b128000 0 0x1000>;
--      #clock-cells = <1>;
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-@@ -0,0 +1,49 @@
-+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek SGMIISYS Controller
-+
-+maintainers:
-+  - Matthias Brugger <matthias.bgg@gmail.com>
-+
-+description:
-+  The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks
-+  to the ethernet subsystem to which it is attached.
-+
-+properties:
-+  compatible:
-+    items:
-+      - enum:
-+          - mediatek,mt7622-sgmiisys
-+          - mediatek,mt7629-sgmiisys
-+          - mediatek,mt7986-sgmiisys_0
-+          - mediatek,mt7986-sgmiisys_1
-+      - const: syscon
-+
-+  reg:
-+    maxItems: 1
-+
-+  '#clock-cells':
-+    const: 1
-+
-+required:
-+  - compatible
-+  - reg
-+  - '#clock-cells'
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    soc {
-+      #address-cells = <2>;
-+      #size-cells = <2>;
-+      sgmiisys: syscon@1b128000 {
-+        compatible = "mediatek,mt7622-sgmiisys", "syscon";
-+        reg = <0 0x1b128000 0 0x1000>;
-+        #clock-cells = <1>;
-+      };
-+    };
diff --git a/target/linux/mediatek/patches-6.6/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch b/target/linux/mediatek/patches-6.6/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch
deleted file mode 100644 (file)
index 62a64b9..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 4f7eb19c4f44078100659f6ba073b0cc7191bc91 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:57:04 +0000
-Subject: [PATCH 2/2] dt-bindings: net: pcs: mediatek,sgmiisys: add MT7981 SoC
-
-Add mediatek,pnswap boolean property needed on many boards using the
-MediaTek MT7981 SoC.
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- .../devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml      | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-@@ -19,6 +19,8 @@ properties:
-       - enum:
-           - mediatek,mt7622-sgmiisys
-           - mediatek,mt7629-sgmiisys
-+          - mediatek,mt7981-sgmiisys_0
-+          - mediatek,mt7981-sgmiisys_1
-           - mediatek,mt7986-sgmiisys_0
-           - mediatek,mt7986-sgmiisys_1
-       - const: syscon
-@@ -29,6 +31,10 @@ properties:
-   '#clock-cells':
-     const: 1
-+  mediatek,pnswap:
-+    description: Invert polarity of the SGMII data lanes
-+    type: boolean
-+
- required:
-   - compatible
-   - reg
diff --git a/target/linux/mediatek/patches-6.6/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch b/target/linux/mediatek/patches-6.6/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch
deleted file mode 100644 (file)
index 5e3afd8..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-From 24e961b93d292d0dd6380213d22a071a99ea787d Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Tue, 25 Oct 2022 15:29:53 +0200
-Subject: [PATCH 1/6] mmc: mediatek: add support for MT7986 SoC
-
-Adding mt7986 own characteristics and of_device_id to have support
-of MT7986 SoC.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221025132953.81286-7-linux@fw-web.de
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -552,6 +552,19 @@ static const struct mtk_mmc_compatible m
-       .support_64g = false,
- };
-+static const struct mtk_mmc_compatible mt7986_compat = {
-+      .clk_div_bits = 12,
-+      .recheck_sdio_irq = true,
-+      .hs400_tune = false,
-+      .pad_tune_reg = MSDC_PAD_TUNE0,
-+      .async_fifo = true,
-+      .data_tune = true,
-+      .busy_check = true,
-+      .stop_clk_fix = true,
-+      .enhance_rx = true,
-+      .support_64g = true,
-+};
-+
- static const struct mtk_mmc_compatible mt8135_compat = {
-       .clk_div_bits = 8,
-       .recheck_sdio_irq = true,
-@@ -609,6 +622,7 @@ static const struct of_device_id msdc_of
-       { .compatible = "mediatek,mt6795-mmc", .data = &mt6795_compat},
-       { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
-       { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
-+      { .compatible = "mediatek,mt7986-mmc", .data = &mt7986_compat},
-       { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
-       { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
-       { .compatible = "mediatek,mt8183-mmc", .data = &mt8183_compat},
diff --git a/target/linux/mediatek/patches-6.6/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch b/target/linux/mediatek/patches-6.6/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch
deleted file mode 100644 (file)
index db2802b..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 7b438d0377fbd520b475a68bdd9de1692393f22d Mon Sep 17 00:00:00 2001
-From: Mengqi Zhang <mengqi.zhang@mediatek.com>
-Date: Sun, 6 Nov 2022 11:39:24 +0800
-Subject: [PATCH 2/6] mmc: mtk-sd: add Inline Crypto Engine clock control
-
-Add crypto clock control and ungate it before CQHCI init.
-
-Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106033924.9854-2-mengqi.zhang@mediatek.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -452,6 +452,7 @@ struct msdc_host {
-       struct clk *bus_clk;    /* bus clock which used to access register */
-       struct clk *src_clk_cg; /* msdc source clock control gate */
-       struct clk *sys_clk_cg; /* msdc subsys clock control gate */
-+      struct clk *crypto_clk; /* msdc crypto clock control gate */
-       struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
-       u32 mclk;               /* mmc subsystem clock frequency */
-       u32 src_clk_freq;       /* source clock frequency */
-@@ -840,6 +841,7 @@ static void msdc_set_busy_timeout(struct
- static void msdc_gate_clock(struct msdc_host *host)
- {
-       clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
-+      clk_disable_unprepare(host->crypto_clk);
-       clk_disable_unprepare(host->src_clk_cg);
-       clk_disable_unprepare(host->src_clk);
-       clk_disable_unprepare(host->bus_clk);
-@@ -855,6 +857,7 @@ static int msdc_ungate_clock(struct msdc
-       clk_prepare_enable(host->bus_clk);
-       clk_prepare_enable(host->src_clk);
-       clk_prepare_enable(host->src_clk_cg);
-+      clk_prepare_enable(host->crypto_clk);
-       ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
-       if (ret) {
-               dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
-@@ -2670,6 +2673,15 @@ static int msdc_drv_probe(struct platfor
-               goto host_free;
-       }
-+      /* only eMMC has crypto property */
-+      if (!(mmc->caps2 & MMC_CAP2_NO_MMC)) {
-+              host->crypto_clk = devm_clk_get_optional(&pdev->dev, "crypto");
-+              if (IS_ERR(host->crypto_clk))
-+                      host->crypto_clk = NULL;
-+              else
-+                      mmc->caps2 |= MMC_CAP2_CRYPTO;
-+      }
-+
-       host->irq = platform_get_irq(pdev, 0);
-       if (host->irq < 0) {
-               ret = host->irq;
diff --git a/target/linux/mediatek/patches-6.6/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch b/target/linux/mediatek/patches-6.6/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch
deleted file mode 100644 (file)
index 921d249..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 4b323f02b6e8df1b04292635ef829e7f723bf50e Mon Sep 17 00:00:00 2001
-From: Yu Zhe <yuzhe@nfschina.com>
-Date: Thu, 10 Nov 2022 15:28:19 +0800
-Subject: [PATCH 3/6] mmc: mtk-sd: fix two spelling mistakes in comment
-
-spelling mistake fix : "alreay" -> "already"
-                      "checksume" -> "checksum"
-
-Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221110072819.11530-1-yuzhe@nfschina.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -750,7 +750,7 @@ static inline void msdc_dma_setup(struct
-               else
-                       bd[j].bd_info &= ~BDMA_DESC_EOL;
--              /* checksume need to clear first */
-+              /* checksum need to clear first */
-               bd[j].bd_info &= ~BDMA_DESC_CHECKSUM;
-               bd[j].bd_info |= msdc_dma_calcs((u8 *)(&bd[j]), 16) << 8;
-       }
-@@ -1229,7 +1229,7 @@ static bool msdc_cmd_done(struct msdc_ho
-                    !host->hs400_tuning))
-                       /*
-                        * should not clear fifo/interrupt as the tune data
--                       * may have alreay come when cmd19/cmd21 gets response
-+                       * may have already come when cmd19/cmd21 gets response
-                        * CRC error.
-                        */
-                       msdc_reset_hw(host);
diff --git a/target/linux/mediatek/patches-6.6/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch b/target/linux/mediatek/patches-6.6/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch
deleted file mode 100644 (file)
index 8e2151e..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From b98e7e8daf0ebab9dcc36812378a71e1be0b5089 Mon Sep 17 00:00:00 2001
-From: ChanWoo Lee <cw9316.lee@samsung.com>
-Date: Thu, 24 Nov 2022 17:00:31 +0900
-Subject: [PATCH 4/6] mmc: Avoid open coding by using mmc_op_tuning()
-
-Replace code with the already defined function. No functional changes.
-
-Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
-Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
-Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -1224,9 +1224,7 @@ static bool msdc_cmd_done(struct msdc_ho
-       if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
-               if (events & MSDC_INT_CMDTMO ||
--                  (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
--                   cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
--                   !host->hs400_tuning))
-+                  (!mmc_op_tuning(cmd->opcode) && !host->hs400_tuning))
-                       /*
-                        * should not clear fifo/interrupt as the tune data
-                        * may have already come when cmd19/cmd21 gets response
-@@ -1320,9 +1318,7 @@ static void msdc_cmd_next(struct msdc_ho
- {
-       if ((cmd->error &&
-           !(cmd->error == -EILSEQ &&
--            (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
--             cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200 ||
--             host->hs400_tuning))) ||
-+            (mmc_op_tuning(cmd->opcode) || host->hs400_tuning))) ||
-           (mrq->sbc && mrq->sbc->error))
-               msdc_request_done(host, mrq);
-       else if (cmd == mrq->sbc)
diff --git a/target/linux/mediatek/patches-6.6/405-v6.2-mt7986-trng-add-rng-support.patch b/target/linux/mediatek/patches-6.6/405-v6.2-mt7986-trng-add-rng-support.patch
deleted file mode 100644 (file)
index 615a1a1..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-From f1da27b7c4191f78ed81d3dabf64c769f896296c Mon Sep 17 00:00:00 2001
-From: "Mingming.Su" <Mingming.Su@mediatek.com>
-Date: Sat, 8 Oct 2022 18:45:53 +0200
-Subject: [PATCH] hwrng: mtk - add mt7986 support
-
-1. Add trng compatible name for MT7986
-2. Fix mtk_rng_wait_ready() function
-
-Signed-off-by: Mingming.Su <Mingming.Su@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/char/hw_random/mtk-rng.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/char/hw_random/mtk-rng.c
-+++ b/drivers/char/hw_random/mtk-rng.c
-@@ -22,7 +22,7 @@
- #define RNG_AUTOSUSPEND_TIMEOUT               100
- #define USEC_POLL                     2
--#define TIMEOUT_POLL                  20
-+#define TIMEOUT_POLL                  60
- #define RNG_CTRL                      0x00
- #define RNG_EN                                BIT(0)
-@@ -77,7 +77,7 @@ static bool mtk_rng_wait_ready(struct hw
-               readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
-                                         ready & RNG_READY, USEC_POLL,
-                                         TIMEOUT_POLL);
--      return !!ready;
-+      return !!(ready & RNG_READY);
- }
- static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
-@@ -179,6 +179,7 @@ static const struct dev_pm_ops mtk_rng_p
- #endif        /* CONFIG_PM */
- static const struct of_device_id mtk_rng_match[] = {
-+      { .compatible = "mediatek,mt7986-rng" },
-       { .compatible = "mediatek,mt7623-rng" },
-       {},
- };
diff --git a/target/linux/mediatek/patches-6.6/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-6.6/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch
deleted file mode 100644 (file)
index 0bbf9ac..0000000
+++ /dev/null
@@ -1,1204 +0,0 @@
-From 98c485eaf509bc0e2a85f9b58d17cd501f274c4e Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 11 Jun 2023 00:48:10 +0100
-Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs
-
-Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
-PHYs which require calibration data from the SoC's efuse.
-Despite the similar design the driver doesn't share any code with the
-existing mediatek-ge.c.
-Add support for such PHYs by introducing a new driver with basic
-support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                       |    9 +
- drivers/net/phy/Kconfig           |   12 +
- drivers/net/phy/Makefile          |    1 +
- drivers/net/phy/mediatek-ge-soc.c | 1116 +++++++++++++++++++++++++++++
- drivers/net/phy/mediatek-ge.c     |    3 +-
- 5 files changed, 1140 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/phy/mediatek-ge-soc.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12938,6 +12938,15 @@ F:    drivers/net/pcs/pcs-mtk-usxgmii.c
- F:    include/linux/pcs/pcs-mtk-lynxi.h
- F:    include/linux/pcs/pcs-mtk-usxgmii.h
-+MEDIATEK ETHERNET PHY DRIVERS
-+M:    Daniel Golle <daniel@makrotopia.org>
-+M:    Qingfang Deng <dqfext@gmail.com>
-+M:    SkyLake Huang <SkyLake.Huang@mediatek.com>
-+L:    netdev@vger.kernel.org
-+S:    Maintained
-+F:    drivers/net/phy/mediatek-ge-soc.c
-+F:    drivers/net/phy/mediatek-ge.c
-+
- MEDIATEK I2C CONTROLLER DRIVER
- M:    Qii Wang <qii.wang@mediatek.com>
- L:    linux-i2c@vger.kernel.org
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -314,6 +314,18 @@ config MEDIATEK_GE_PHY
-       help
-         Supports the MediaTek Gigabit Ethernet PHYs.
-+config MEDIATEK_GE_SOC_PHY
-+      tristate "MediaTek SoC Ethernet PHYs"
-+      depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
-+      select NVMEM_MTK_EFUSE
-+      help
-+        Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-+
-+        Include support for built-in Ethernet PHYs which are present in
-+        the MT7981 and MT7988 SoCs. These PHYs need calibration data
-+        present in the SoCs efuse and will dynamically calibrate VCM
-+        (common-mode voltage) during startup.
-+
- config MICREL_PHY
-       tristate "Micrel PHYs"
-       depends on PTP_1588_CLOCK_OPTIONAL
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_PHY)    += marvell.o
- obj-$(CONFIG_MARVELL_88X2222_PHY)     += marvell-88x2222.o
- obj-$(CONFIG_MAXLINEAR_GPHY)  += mxl-gpy.o
- obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY)     += mediatek-ge-soc.o
- obj-$(CONFIG_MESON_GXL_PHY)   += meson-gxl.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_MICREL_PHY)      += micrel.o
---- /dev/null
-+++ b/drivers/net/phy/mediatek-ge-soc.c
-@@ -0,0 +1,1116 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+#include <linux/bitfield.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/phy.h>
-+
-+#define MTK_GPHY_ID_MT7981                    0x03a29461
-+#define MTK_GPHY_ID_MT7988                    0x03a29481
-+
-+#define MTK_EXT_PAGE_ACCESS                   0x1f
-+#define MTK_PHY_PAGE_STANDARD                 0x0000
-+#define MTK_PHY_PAGE_EXTENDED_3                       0x0003
-+
-+#define MTK_PHY_LPI_REG_14                    0x14
-+#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK      GENMASK(8, 0)
-+
-+#define MTK_PHY_LPI_REG_1c                    0x1c
-+#define MTK_PHY_SMI_DET_ON_THRESH_MASK                GENMASK(13, 8)
-+
-+#define MTK_PHY_PAGE_EXTENDED_2A30            0x2a30
-+#define MTK_PHY_PAGE_EXTENDED_52B5            0x52b5
-+
-+#define ANALOG_INTERNAL_OPERATION_MAX_US      20
-+#define TXRESERVE_MIN                         0
-+#define TXRESERVE_MAX                         7
-+
-+#define MTK_PHY_ANARG_RG                      0x10
-+#define   MTK_PHY_TCLKOFFSET_MASK             GENMASK(12, 8)
-+
-+/* Registers on MDIO_MMD_VEND1 */
-+#define MTK_PHY_TXVLD_DA_RG                   0x12
-+#define   MTK_PHY_DA_TX_I2MPB_A_GBE_MASK      GENMASK(15, 10)
-+#define   MTK_PHY_DA_TX_I2MPB_A_TBT_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_A2         0x16
-+#define   MTK_PHY_DA_TX_I2MPB_A_HBT_MASK      GENMASK(15, 10)
-+#define   MTK_PHY_DA_TX_I2MPB_A_TST_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_B1         0x17
-+#define   MTK_PHY_DA_TX_I2MPB_B_GBE_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_B_TBT_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_B2         0x18
-+#define   MTK_PHY_DA_TX_I2MPB_B_HBT_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_B_TST_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_C1         0x19
-+#define   MTK_PHY_DA_TX_I2MPB_C_GBE_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_C_TBT_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_C2         0x20
-+#define   MTK_PHY_DA_TX_I2MPB_C_HBT_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_C_TST_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_D1         0x21
-+#define   MTK_PHY_DA_TX_I2MPB_D_GBE_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_D_TBT_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_D2         0x22
-+#define   MTK_PHY_DA_TX_I2MPB_D_HBT_MASK      GENMASK(13, 8)
-+#define   MTK_PHY_DA_TX_I2MPB_D_TST_MASK      GENMASK(5, 0)
-+
-+#define MTK_PHY_RXADC_CTRL_RG7                        0xc6
-+#define   MTK_PHY_DA_AD_BUF_BIAS_LP_MASK      GENMASK(9, 8)
-+
-+#define MTK_PHY_RXADC_CTRL_RG9                        0xc8
-+#define   MTK_PHY_DA_RX_PSBN_TBT_MASK         GENMASK(14, 12)
-+#define   MTK_PHY_DA_RX_PSBN_HBT_MASK         GENMASK(10, 8)
-+#define   MTK_PHY_DA_RX_PSBN_GBE_MASK         GENMASK(6, 4)
-+#define   MTK_PHY_DA_RX_PSBN_LP_MASK          GENMASK(2, 0)
-+
-+#define MTK_PHY_LDO_OUTPUT_V                  0xd7
-+
-+#define MTK_PHY_RG_ANA_CAL_RG0                        0xdb
-+#define   MTK_PHY_RG_CAL_CKINV                        BIT(12)
-+#define   MTK_PHY_RG_ANA_CALEN                        BIT(8)
-+#define   MTK_PHY_RG_ZCALEN_A                 BIT(0)
-+
-+#define MTK_PHY_RG_ANA_CAL_RG1                        0xdc
-+#define   MTK_PHY_RG_ZCALEN_B                 BIT(12)
-+#define   MTK_PHY_RG_ZCALEN_C                 BIT(8)
-+#define   MTK_PHY_RG_ZCALEN_D                 BIT(4)
-+#define   MTK_PHY_RG_TXVOS_CALEN              BIT(0)
-+
-+#define MTK_PHY_RG_ANA_CAL_RG5                        0xe0
-+#define   MTK_PHY_RG_REXT_TRIM_MASK           GENMASK(13, 8)
-+
-+#define MTK_PHY_RG_TX_FILTER                  0xfe
-+
-+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120    0x120
-+#define   MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK       GENMASK(12, 8)
-+#define   MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK       GENMASK(4, 0)
-+
-+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122    0x122
-+#define   MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK     GENMASK(7, 0)
-+
-+#define MTK_PHY_RG_TESTMUX_ADC_CTRL           0x144
-+#define   MTK_PHY_RG_TXEN_DIG_MASK            GENMASK(5, 5)
-+
-+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B               0x172
-+#define   MTK_PHY_CR_TX_AMP_OFFSET_A_MASK     GENMASK(13, 8)
-+#define   MTK_PHY_CR_TX_AMP_OFFSET_B_MASK     GENMASK(6, 0)
-+
-+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D               0x173
-+#define   MTK_PHY_CR_TX_AMP_OFFSET_C_MASK     GENMASK(13, 8)
-+#define   MTK_PHY_CR_TX_AMP_OFFSET_D_MASK     GENMASK(6, 0)
-+
-+#define MTK_PHY_RG_AD_CAL_COMP                        0x17a
-+#define   MTK_PHY_AD_CAL_COMP_OUT_SHIFT               (8)
-+
-+#define MTK_PHY_RG_AD_CAL_CLK                 0x17b
-+#define   MTK_PHY_DA_CAL_CLK                  BIT(0)
-+
-+#define MTK_PHY_RG_AD_CALIN                   0x17c
-+#define   MTK_PHY_DA_CALIN_FLAG                       BIT(0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_A             0x17d
-+#define   MTK_PHY_DASN_DAC_IN0_A_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_B             0x17e
-+#define   MTK_PHY_DASN_DAC_IN0_B_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_C             0x17f
-+#define   MTK_PHY_DASN_DAC_IN0_C_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_D             0x180
-+#define   MTK_PHY_DASN_DAC_IN0_D_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_A             0x181
-+#define   MTK_PHY_DASN_DAC_IN1_A_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_B             0x182
-+#define   MTK_PHY_DASN_DAC_IN1_B_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_C             0x183
-+#define   MTK_PHY_DASN_DAC_IN1_C_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_D             0x184
-+#define   MTK_PHY_DASN_DAC_IN1_D_MASK         GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DEV1E_REG19b                       0x19b
-+#define   MTK_PHY_BYPASS_DSP_LPI_READY                BIT(8)
-+
-+#define MTK_PHY_RG_LP_IIR2_K1_L                       0x22a
-+#define MTK_PHY_RG_LP_IIR2_K1_U                       0x22b
-+#define MTK_PHY_RG_LP_IIR2_K2_L                       0x22c
-+#define MTK_PHY_RG_LP_IIR2_K2_U                       0x22d
-+#define MTK_PHY_RG_LP_IIR2_K3_L                       0x22e
-+#define MTK_PHY_RG_LP_IIR2_K3_U                       0x22f
-+#define MTK_PHY_RG_LP_IIR2_K4_L                       0x230
-+#define MTK_PHY_RG_LP_IIR2_K4_U                       0x231
-+#define MTK_PHY_RG_LP_IIR2_K5_L                       0x232
-+#define MTK_PHY_RG_LP_IIR2_K5_U                       0x233
-+
-+#define MTK_PHY_RG_DEV1E_REG234                       0x234
-+#define   MTK_PHY_TR_OPEN_LOOP_EN_MASK                GENMASK(0, 0)
-+#define   MTK_PHY_LPF_X_AVERAGE_MASK          GENMASK(7, 4)
-+#define   MTK_PHY_TR_LP_IIR_EEE_EN            BIT(12)
-+
-+#define MTK_PHY_RG_LPF_CNT_VAL                        0x235
-+
-+#define MTK_PHY_RG_DEV1E_REG238                       0x238
-+#define   MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK  GENMASK(8, 0)
-+#define   MTK_PHY_LPI_SLV_SEND_TX_EN          BIT(12)
-+
-+#define MTK_PHY_RG_DEV1E_REG239                       0x239
-+#define   MTK_PHY_LPI_SEND_LOC_TIMER_MASK     GENMASK(8, 0)
-+#define   MTK_PHY_LPI_TXPCS_LOC_RCV           BIT(12)
-+
-+#define MTK_PHY_RG_DEV1E_REG27C                       0x27c
-+#define   MTK_PHY_VGASTATE_FFE_THR_ST1_MASK   GENMASK(12, 8)
-+#define MTK_PHY_RG_DEV1E_REG27D                       0x27d
-+#define   MTK_PHY_VGASTATE_FFE_THR_ST2_MASK   GENMASK(4, 0)
-+
-+#define MTK_PHY_RG_DEV1E_REG2C7                       0x2c7
-+#define   MTK_PHY_MAX_GAIN_MASK                       GENMASK(4, 0)
-+#define   MTK_PHY_MIN_GAIN_MASK                       GENMASK(12, 8)
-+
-+#define MTK_PHY_RG_DEV1E_REG2D1                       0x2d1
-+#define   MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK        GENMASK(7, 0)
-+#define   MTK_PHY_LPI_SKIP_SD_SLV_TR          BIT(8)
-+#define   MTK_PHY_LPI_TR_READY                        BIT(9)
-+#define   MTK_PHY_LPI_VCO_EEE_STG0_EN         BIT(10)
-+
-+#define MTK_PHY_RG_DEV1E_REG323                       0x323
-+#define   MTK_PHY_EEE_WAKE_MAS_INT_DC         BIT(0)
-+#define   MTK_PHY_EEE_WAKE_SLV_INT_DC         BIT(4)
-+
-+#define MTK_PHY_RG_DEV1E_REG324                       0x324
-+#define   MTK_PHY_SMI_DETCNT_MAX_MASK         GENMASK(5, 0)
-+#define   MTK_PHY_SMI_DET_MAX_EN              BIT(8)
-+
-+#define MTK_PHY_RG_DEV1E_REG326                       0x326
-+#define   MTK_PHY_LPI_MODE_SD_ON              BIT(0)
-+#define   MTK_PHY_RESET_RANDUPD_CNT           BIT(1)
-+#define   MTK_PHY_TREC_UPDATE_ENAB_CLR                BIT(2)
-+#define   MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF       BIT(4)
-+#define   MTK_PHY_TR_READY_SKIP_AFE_WAKEUP    BIT(5)
-+
-+#define MTK_PHY_LDO_PUMP_EN_PAIRAB            0x502
-+#define MTK_PHY_LDO_PUMP_EN_PAIRCD            0x503
-+
-+#define MTK_PHY_DA_TX_R50_PAIR_A              0x53d
-+#define MTK_PHY_DA_TX_R50_PAIR_B              0x53e
-+#define MTK_PHY_DA_TX_R50_PAIR_C              0x53f
-+#define MTK_PHY_DA_TX_R50_PAIR_D              0x540
-+
-+#define MTK_PHY_RG_BG_RASEL                   0x115
-+#define   MTK_PHY_RG_BG_RASEL_MASK            GENMASK(2, 0)
-+
-+/* These macro privides efuse parsing for internal phy. */
-+#define EFS_DA_TX_I2MPB_A(x)                  (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_B(x)                  (((x) >> 6) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_C(x)                  (((x) >> 12) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_D(x)                  (((x) >> 18) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_A(x)             (((x) >> 24) & GENMASK(5, 0))
-+
-+#define EFS_DA_TX_AMP_OFFSET_B(x)             (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_C(x)             (((x) >> 6) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_D(x)             (((x) >> 12) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_A(x)                    (((x) >> 18) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_B(x)                    (((x) >> 24) & GENMASK(5, 0))
-+
-+#define EFS_DA_TX_R50_C(x)                    (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_D(x)                    (((x) >> 6) & GENMASK(5, 0))
-+
-+#define EFS_RG_BG_RASEL(x)                    (((x) >> 4) & GENMASK(2, 0))
-+#define EFS_RG_REXT_TRIM(x)                   (((x) >> 7) & GENMASK(5, 0))
-+
-+enum {
-+      NO_PAIR,
-+      PAIR_A,
-+      PAIR_B,
-+      PAIR_C,
-+      PAIR_D,
-+};
-+
-+enum {
-+      GPHY_PORT0,
-+      GPHY_PORT1,
-+      GPHY_PORT2,
-+      GPHY_PORT3,
-+};
-+
-+enum calibration_mode {
-+      EFUSE_K,
-+      SW_K
-+};
-+
-+enum CAL_ITEM {
-+      REXT,
-+      TX_OFFSET,
-+      TX_AMP,
-+      TX_R50,
-+      TX_VCM
-+};
-+
-+enum CAL_MODE {
-+      EFUSE_M,
-+      SW_M
-+};
-+
-+static int mtk_socphy_read_page(struct phy_device *phydev)
-+{
-+      return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-+}
-+
-+static int mtk_socphy_write_page(struct phy_device *phydev, int page)
-+{
-+      return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-+}
-+
-+/* One calibration cycle consists of:
-+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
-+ *   until AD_CAL_COMP is ready to output calibration result.
-+ * 2.Wait until DA_CAL_CLK is available.
-+ * 3.Fetch AD_CAL_COMP_OUT.
-+ */
-+static int cal_cycle(struct phy_device *phydev, int devad,
-+                   u32 regnum, u16 mask, u16 cal_val)
-+{
-+      int reg_val;
-+      int ret;
-+
-+      phy_modify_mmd(phydev, devad, regnum,
-+                     mask, cal_val);
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
-+                       MTK_PHY_DA_CALIN_FLAG);
-+
-+      ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+                                      MTK_PHY_RG_AD_CAL_CLK, reg_val,
-+                                      reg_val & MTK_PHY_DA_CAL_CLK, 500,
-+                                      ANALOG_INTERNAL_OPERATION_MAX_US, false);
-+      if (ret) {
-+              phydev_err(phydev, "Calibration cycle timeout\n");
-+              return ret;
-+      }
-+
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
-+                         MTK_PHY_DA_CALIN_FLAG);
-+      ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
-+                         MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
-+      phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
-+
-+      return ret;
-+}
-+
-+static int rext_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
-+                     MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
-+                     MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
-+
-+      return 0;
-+}
-+
-+static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+      u16 rext_cal_val[2];
-+
-+      rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
-+      rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
-+      rext_fill_result(phydev, rext_cal_val);
-+
-+      return 0;
-+}
-+
-+static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
-+                     MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
-+                     MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
-+                     MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
-+                     MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
-+
-+      return 0;
-+}
-+
-+static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+      u16 tx_offset_cal_val[4];
-+
-+      tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
-+      tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
-+      tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
-+      tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
-+
-+      tx_offset_fill_result(phydev, tx_offset_cal_val);
-+
-+      return 0;
-+}
-+
-+static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+      int i;
-+      int bias[16] = {};
-+      const int vals_9461[16] = { 7, 1, 4, 7,
-+                                  7, 1, 4, 7,
-+                                  7, 1, 4, 7,
-+                                  7, 1, 4, 7 };
-+      const int vals_9481[16] = { 10, 6, 6, 10,
-+                                  10, 6, 6, 10,
-+                                  10, 6, 6, 10,
-+                                  10, 6, 6, 10 };
-+      switch (phydev->drv->phy_id) {
-+      case MTK_GPHY_ID_MT7981:
-+              /* We add some calibration to efuse values
-+               * due to board level influence.
-+               * GBE: +7, TBT: +1, HBT: +4, TST: +7
-+               */
-+              memcpy(bias, (const void *)vals_9461, sizeof(bias));
-+              break;
-+      case MTK_GPHY_ID_MT7988:
-+              memcpy(bias, (const void *)vals_9481, sizeof(bias));
-+              break;
-+      }
-+
-+      /* Prevent overflow */
-+      for (i = 0; i < 12; i++) {
-+              if (buf[i >> 2] + bias[i] > 63) {
-+                      buf[i >> 2] = 63;
-+                      bias[i] = 0;
-+              }
-+      }
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
-+                     MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
-+                     MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
-+                     MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
-+                     MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
-+                     MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
-+                     MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
-+                     MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
-+                     MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
-+                     MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
-+                     MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
-+                     MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
-+                     MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
-+                     MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
-+                     MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
-+                     MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
-+                     MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
-+
-+      return 0;
-+}
-+
-+static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+      u16 tx_amp_cal_val[4];
-+
-+      tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
-+      tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
-+      tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
-+      tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
-+      tx_amp_fill_result(phydev, tx_amp_cal_val);
-+
-+      return 0;
-+}
-+
-+static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
-+                            u8 txg_calen_x)
-+{
-+      int bias = 0;
-+      u16 reg, val;
-+
-+      if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
-+              bias = -2;
-+
-+      val = clamp_val(bias + tx_r50_cal_val, 0, 63);
-+
-+      switch (txg_calen_x) {
-+      case PAIR_A:
-+              reg = MTK_PHY_DA_TX_R50_PAIR_A;
-+              break;
-+      case PAIR_B:
-+              reg = MTK_PHY_DA_TX_R50_PAIR_B;
-+              break;
-+      case PAIR_C:
-+              reg = MTK_PHY_DA_TX_R50_PAIR_C;
-+              break;
-+      case PAIR_D:
-+              reg = MTK_PHY_DA_TX_R50_PAIR_D;
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
-+
-+      return 0;
-+}
-+
-+static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
-+                          u8 txg_calen_x)
-+{
-+      u16 tx_r50_cal_val;
-+
-+      switch (txg_calen_x) {
-+      case PAIR_A:
-+              tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
-+              break;
-+      case PAIR_B:
-+              tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
-+              break;
-+      case PAIR_C:
-+              tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
-+              break;
-+      case PAIR_D:
-+              tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+      tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
-+
-+      return 0;
-+}
-+
-+static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
-+{
-+      u8 lower_idx, upper_idx, txreserve_val;
-+      u8 lower_ret, upper_ret;
-+      int ret;
-+
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+                       MTK_PHY_RG_ANA_CALEN);
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+                         MTK_PHY_RG_CAL_CKINV);
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+                       MTK_PHY_RG_TXVOS_CALEN);
-+
-+      switch (rg_txreserve_x) {
-+      case PAIR_A:
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN0_A,
-+                                 MTK_PHY_DASN_DAC_IN0_A_MASK);
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN1_A,
-+                                 MTK_PHY_DASN_DAC_IN1_A_MASK);
-+              phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                               MTK_PHY_RG_ANA_CAL_RG0,
-+                               MTK_PHY_RG_ZCALEN_A);
-+              break;
-+      case PAIR_B:
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN0_B,
-+                                 MTK_PHY_DASN_DAC_IN0_B_MASK);
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN1_B,
-+                                 MTK_PHY_DASN_DAC_IN1_B_MASK);
-+              phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                               MTK_PHY_RG_ANA_CAL_RG1,
-+                               MTK_PHY_RG_ZCALEN_B);
-+              break;
-+      case PAIR_C:
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN0_C,
-+                                 MTK_PHY_DASN_DAC_IN0_C_MASK);
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN1_C,
-+                                 MTK_PHY_DASN_DAC_IN1_C_MASK);
-+              phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                               MTK_PHY_RG_ANA_CAL_RG1,
-+                               MTK_PHY_RG_ZCALEN_C);
-+              break;
-+      case PAIR_D:
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN0_D,
-+                                 MTK_PHY_DASN_DAC_IN0_D_MASK);
-+              phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                                 MTK_PHY_RG_DASN_DAC_IN1_D,
-+                                 MTK_PHY_DASN_DAC_IN1_D_MASK);
-+              phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                               MTK_PHY_RG_ANA_CAL_RG1,
-+                               MTK_PHY_RG_ZCALEN_D);
-+              break;
-+      default:
-+              ret = -EINVAL;
-+              goto restore;
-+      }
-+
-+      lower_idx = TXRESERVE_MIN;
-+      upper_idx = TXRESERVE_MAX;
-+
-+      phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
-+      while ((upper_idx - lower_idx) > 1) {
-+              txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
-+              ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+                              MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+                              MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+                              MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+                              MTK_PHY_DA_RX_PSBN_LP_MASK,
-+                              txreserve_val << 12 | txreserve_val << 8 |
-+                              txreserve_val << 4 | txreserve_val);
-+              if (ret == 1) {
-+                      upper_idx = txreserve_val;
-+                      upper_ret = ret;
-+              } else if (ret == 0) {
-+                      lower_idx = txreserve_val;
-+                      lower_ret = ret;
-+              } else {
-+                      goto restore;
-+              }
-+      }
-+
-+      if (lower_idx == TXRESERVE_MIN) {
-+              lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
-+                                    MTK_PHY_RXADC_CTRL_RG9,
-+                                    MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_LP_MASK,
-+                                    lower_idx << 12 | lower_idx << 8 |
-+                                    lower_idx << 4 | lower_idx);
-+              ret = lower_ret;
-+      } else if (upper_idx == TXRESERVE_MAX) {
-+              upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
-+                                    MTK_PHY_RXADC_CTRL_RG9,
-+                                    MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+                                    MTK_PHY_DA_RX_PSBN_LP_MASK,
-+                                    upper_idx << 12 | upper_idx << 8 |
-+                                    upper_idx << 4 | upper_idx);
-+              ret = upper_ret;
-+      }
-+      if (ret < 0)
-+              goto restore;
-+
-+      /* We calibrate TX-VCM in different logic. Check upper index and then
-+       * lower index. If this calibration is valid, apply lower index's result.
-+       */
-+      ret = upper_ret - lower_ret;
-+      if (ret == 1) {
-+              ret = 0;
-+              /* Make sure we use upper_idx in our calibration system */
-+              cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+                        MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+                        MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+                        MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+                        MTK_PHY_DA_RX_PSBN_LP_MASK,
-+                        upper_idx << 12 | upper_idx << 8 |
-+                        upper_idx << 4 | upper_idx);
-+              phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
-+      } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
-+                 lower_ret == 1) {
-+              ret = 0;
-+              cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+                        MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+                        MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+                        MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+                        MTK_PHY_DA_RX_PSBN_LP_MASK,
-+                        lower_idx << 12 | lower_idx << 8 |
-+                        lower_idx << 4 | lower_idx);
-+              phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
-+                          lower_idx);
-+      } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
-+                 lower_ret == 0) {
-+              ret = 0;
-+              phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
-+                          upper_idx);
-+      } else {
-+              ret = -EINVAL;
-+      }
-+
-+restore:
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+                         MTK_PHY_RG_ANA_CALEN);
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+                         MTK_PHY_RG_TXVOS_CALEN);
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+                         MTK_PHY_RG_ZCALEN_A);
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+                         MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
-+                         MTK_PHY_RG_ZCALEN_D);
-+
-+      return ret;
-+}
-+
-+static void mt798x_phy_common_finetune(struct phy_device *phydev)
-+{
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+      /* EnabRandUpdTrig = 1 */
-+      __phy_write(phydev, 0x11, 0x2f00);
-+      __phy_write(phydev, 0x12, 0xe);
-+      __phy_write(phydev, 0x10, 0x8fb0);
-+
-+      /* NormMseLoThresh = 85 */
-+      __phy_write(phydev, 0x11, 0x55a0);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x83aa);
-+
-+      /* TrFreeze = 0 */
-+      __phy_write(phydev, 0x11, 0x0);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x9686);
-+
-+      /* SSTrKp1000Slv = 5 */
-+      __phy_write(phydev, 0x11, 0xbaef);
-+      __phy_write(phydev, 0x12, 0x2e);
-+      __phy_write(phydev, 0x10, 0x968c);
-+
-+      /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
-+       * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
-+       */
-+      __phy_write(phydev, 0x11, 0xd10a);
-+      __phy_write(phydev, 0x12, 0x34);
-+      __phy_write(phydev, 0x10, 0x8f82);
-+
-+      /* VcoSlicerThreshBitsHigh */
-+      __phy_write(phydev, 0x11, 0x5555);
-+      __phy_write(phydev, 0x12, 0x55);
-+      __phy_write(phydev, 0x10, 0x8ec0);
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+      /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
-+                     MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
-+                     BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
-+
-+      /* rg_tr_lpf_cnt_val = 512 */
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
-+
-+      /* IIR2 related */
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
-+
-+      /* FFE peaking */
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
-+                     MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
-+                     MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
-+
-+      /* Disable LDO pump */
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
-+      /* Adjust LDO output voltage */
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
-+}
-+
-+static void mt7981_phy_finetune(struct phy_device *phydev)
-+{
-+      u16 val[8] = { 0x01ce, 0x01c1,
-+                     0x020f, 0x0202,
-+                     0x03d0, 0x03c0,
-+                     0x0013, 0x0005 };
-+      int i, k;
-+
-+      /* 100M eye finetune:
-+       * Keep middle level of TX MLT3 shapper as default.
-+       * Only change TX MLT3 overshoot level here.
-+       */
-+      for (k = 0, i = 1; i < 12; i++) {
-+              if (i % 3 == 0)
-+                      continue;
-+              phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
-+      }
-+
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+      /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
-+      __phy_write(phydev, 0x11, 0xc71);
-+      __phy_write(phydev, 0x12, 0xc);
-+      __phy_write(phydev, 0x10, 0x8fae);
-+
-+      /* ResetSyncOffset = 6 */
-+      __phy_write(phydev, 0x11, 0x600);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x8fc0);
-+
-+      /* VgaDecRate = 1 */
-+      __phy_write(phydev, 0x11, 0x4c2a);
-+      __phy_write(phydev, 0x12, 0x3e);
-+      __phy_write(phydev, 0x10, 0x8fa4);
-+
-+      /* FfeUpdGainForce = 4 */
-+      __phy_write(phydev, 0x11, 0x240);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x9680);
-+
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+}
-+
-+static void mt7988_phy_finetune(struct phy_device *phydev)
-+{
-+      u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
-+                      0x020d, 0x0206, 0x0384, 0x03d0,
-+                      0x03c6, 0x030a, 0x0011, 0x0005 };
-+      int i;
-+
-+      /* Set default MLT3 shaper first */
-+      for (i = 0; i < 12; i++)
-+              phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
-+
-+      /* TCT finetune */
-+      phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
-+
-+      /* Disable TX power saving */
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
-+                     MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
-+
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+
-+      /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */
-+      __phy_write(phydev, 0x11, 0x671);
-+      __phy_write(phydev, 0x12, 0xc);
-+      __phy_write(phydev, 0x10, 0x8fae);
-+
-+      /* ResetSyncOffset = 5 */
-+      __phy_write(phydev, 0x11, 0x500);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x8fc0);
-+
-+      /* VgaDecRate is 1 at default on mt7988 */
-+
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30);
-+      /* TxClkOffset = 2 */
-+      __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK,
-+                   FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2));
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+}
-+
-+static void mt798x_phy_eee(struct phy_device *phydev)
-+{
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+                     MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
-+                     MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
-+                     MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
-+                     FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
-+                     FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+                     MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
-+                     MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+                     FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+                                0xff));
-+
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                         MTK_PHY_RG_TESTMUX_ADC_CTRL,
-+                         MTK_PHY_RG_TXEN_DIG_MASK);
-+
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                       MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
-+
-+      phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+                         MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
-+                     MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
-+                     MTK_PHY_LPI_SLV_SEND_TX_EN,
-+                     FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
-+                     MTK_PHY_LPI_SEND_LOC_TIMER_MASK |
-+                     MTK_PHY_LPI_TXPCS_LOC_RCV,
-+                     FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117));
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
-+                     MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
-+                     FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
-+                     FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
-+                     MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
-+                     FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
-+                                0x33) |
-+                     MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
-+                     MTK_PHY_LPI_VCO_EEE_STG0_EN);
-+
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
-+                       MTK_PHY_EEE_WAKE_MAS_INT_DC |
-+                       MTK_PHY_EEE_WAKE_SLV_INT_DC);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
-+                     MTK_PHY_SMI_DETCNT_MAX_MASK,
-+                     FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
-+                     MTK_PHY_SMI_DET_MAX_EN);
-+
-+      phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
-+                       MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
-+                       MTK_PHY_TREC_UPDATE_ENAB_CLR |
-+                       MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
-+                       MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
-+
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+      /* Regsigdet_sel_1000 = 0 */
-+      __phy_write(phydev, 0x11, 0xb);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x9690);
-+
-+      /* REG_EEE_st2TrKf1000 = 3 */
-+      __phy_write(phydev, 0x11, 0x114f);
-+      __phy_write(phydev, 0x12, 0x2);
-+      __phy_write(phydev, 0x10, 0x969a);
-+
-+      /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
-+      __phy_write(phydev, 0x11, 0x3028);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x969e);
-+
-+      /* RegEEE_slv_wake_int_timer_tar = 8 */
-+      __phy_write(phydev, 0x11, 0x5010);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x96a0);
-+
-+      /* RegEEE_trfreeze_timer2 = 586 */
-+      __phy_write(phydev, 0x11, 0x24a);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x96a8);
-+
-+      /* RegEEE100Stg1_tar = 16 */
-+      __phy_write(phydev, 0x11, 0x3210);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x96b8);
-+
-+      /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */
-+      __phy_write(phydev, 0x11, 0x1463);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x96ca);
-+
-+      /* DfeTailEnableVgaThresh1000 = 27 */
-+      __phy_write(phydev, 0x11, 0x36);
-+      __phy_write(phydev, 0x12, 0x0);
-+      __phy_write(phydev, 0x10, 0x8f80);
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+      phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
-+      __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
-+                   FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
-+
-+      __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
-+                   FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
-+      phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+      phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+                     MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
-+                     MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+                     FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
-+}
-+
-+static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+                u8 start_pair, u8 end_pair)
-+{
-+      u8 pair_n;
-+      int ret;
-+
-+      for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
-+              /* TX_OFFSET & TX_AMP have no SW calibration. */
-+              switch (cal_item) {
-+              case TX_VCM:
-+                      ret = tx_vcm_cal_sw(phydev, pair_n);
-+                      break;
-+              default:
-+                      return -EINVAL;
-+              }
-+              if (ret)
-+                      return ret;
-+      }
-+      return 0;
-+}
-+
-+static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+                   u8 start_pair, u8 end_pair, u32 *buf)
-+{
-+      u8 pair_n;
-+      int ret;
-+
-+      for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
-+              /* TX_VCM has no efuse calibration. */
-+              switch (cal_item) {
-+              case REXT:
-+                      ret = rext_cal_efuse(phydev, buf);
-+                      break;
-+              case TX_OFFSET:
-+                      ret = tx_offset_cal_efuse(phydev, buf);
-+                      break;
-+              case TX_AMP:
-+                      ret = tx_amp_cal_efuse(phydev, buf);
-+                      break;
-+              case TX_R50:
-+                      ret = tx_r50_cal_efuse(phydev, buf, pair_n);
-+                      break;
-+              default:
-+                      return -EINVAL;
-+              }
-+              if (ret)
-+                      return ret;
-+      }
-+
-+      return 0;
-+}
-+
-+static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+                   enum CAL_MODE cal_mode, u8 start_pair,
-+                   u8 end_pair, u32 *buf)
-+{
-+      int ret;
-+
-+      switch (cal_mode) {
-+      case EFUSE_M:
-+              ret = cal_efuse(phydev, cal_item, start_pair,
-+                              end_pair, buf);
-+              break;
-+      case SW_M:
-+              ret = cal_sw(phydev, cal_item, start_pair, end_pair);
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+      if (ret) {
-+              phydev_err(phydev, "cal %d failed\n", cal_item);
-+              return -EIO;
-+      }
-+
-+      return 0;
-+}
-+
-+static int mt798x_phy_calibration(struct phy_device *phydev)
-+{
-+      int ret = 0;
-+      u32 *buf;
-+      size_t len;
-+      struct nvmem_cell *cell;
-+
-+      cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
-+      if (IS_ERR(cell)) {
-+              if (PTR_ERR(cell) == -EPROBE_DEFER)
-+                      return PTR_ERR(cell);
-+              return 0;
-+      }
-+
-+      buf = (u32 *)nvmem_cell_read(cell, &len);
-+      if (IS_ERR(buf))
-+              return PTR_ERR(buf);
-+      nvmem_cell_put(cell);
-+
-+      if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
-+              phydev_err(phydev, "invalid efuse data\n");
-+              ret = -EINVAL;
-+              goto out;
-+      }
-+
-+      ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+      if (ret)
-+              goto out;
-+      ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+      if (ret)
-+              goto out;
-+      ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+      if (ret)
-+              goto out;
-+      ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
-+      if (ret)
-+              goto out;
-+      ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
-+      if (ret)
-+              goto out;
-+
-+out:
-+      kfree(buf);
-+      return ret;
-+}
-+
-+static int mt798x_phy_config_init(struct phy_device *phydev)
-+{
-+      switch (phydev->drv->phy_id) {
-+      case MTK_GPHY_ID_MT7981:
-+              mt7981_phy_finetune(phydev);
-+              break;
-+      case MTK_GPHY_ID_MT7988:
-+              mt7988_phy_finetune(phydev);
-+              break;
-+      }
-+
-+      mt798x_phy_common_finetune(phydev);
-+      mt798x_phy_eee(phydev);
-+
-+      return mt798x_phy_calibration(phydev);
-+}
-+
-+static struct phy_driver mtk_socphy_driver[] = {
-+      {
-+              PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
-+              .name           = "MediaTek MT7981 PHY",
-+              .config_init    = mt798x_phy_config_init,
-+              .config_intr    = genphy_no_config_intr,
-+              .handle_interrupt = genphy_handle_interrupt_no_ack,
-+              .probe          = mt798x_phy_calibration,
-+              .suspend        = genphy_suspend,
-+              .resume         = genphy_resume,
-+              .read_page      = mtk_socphy_read_page,
-+              .write_page     = mtk_socphy_write_page,
-+      },
-+      {
-+              PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
-+              .name           = "MediaTek MT7988 PHY",
-+              .config_init    = mt798x_phy_config_init,
-+              .config_intr    = genphy_no_config_intr,
-+              .handle_interrupt = genphy_handle_interrupt_no_ack,
-+              .probe          = mt798x_phy_calibration,
-+              .suspend        = genphy_suspend,
-+              .resume         = genphy_resume,
-+              .read_page      = mtk_socphy_read_page,
-+              .write_page     = mtk_socphy_write_page,
-+      },
-+};
-+
-+module_phy_driver(mtk_socphy_driver);
-+
-+static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
-+      { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
-+      { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
-+      { }
-+};
-+
-+MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
-+MODULE_LICENSE("GPL");
-+
-+MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
---- a/drivers/net/phy/mediatek-ge.c
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive
- module_phy_driver(mtk_gephy_driver);
- static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
--      { PHY_ID_MATCH_VENDOR(0x03a29400) },
-+      { PHY_ID_MATCH_EXACT(0x03a29441) },
-+      { PHY_ID_MATCH_EXACT(0x03a29412) },
-       { }
- };
diff --git a/target/linux/mediatek/patches-6.6/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch b/target/linux/mediatek/patches-6.6/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch
deleted file mode 100644 (file)
index 286ce96..0000000
+++ /dev/null
@@ -1,524 +0,0 @@
-From c66937b0f8dbb4c6c043663c702b1053fb47fab2 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 14 Aug 2023 02:58:14 +0100
-Subject: [PATCH] net: phy: mediatek-ge-soc: support PHY LEDs
-
-Implement netdev trigger and primitive bliking offloading as well as
-simple set_brigthness function for both PHY LEDs of the in-SoC PHYs
-found in MT7981 and MT7988.
-
-For MT7988, read boottrap register and apply LED polarities accordingly
-to get uniform behavior from all LEDs on MT7988.
-This requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
-which should point to the syscon holding the boottrap register.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/dc324d48c00cd7350f3a506eaa785324cae97372.1691977904.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/mediatek-ge-soc.c | 435 +++++++++++++++++++++++++++++-
- 1 file changed, 426 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/mediatek-ge-soc.c
-+++ b/drivers/net/phy/mediatek-ge-soc.c
-@@ -1,11 +1,14 @@
- // SPDX-License-Identifier: GPL-2.0+
- #include <linux/bitfield.h>
-+#include <linux/bitmap.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/nvmem-consumer.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/phy.h>
-+#include <linux/regmap.h>
- #define MTK_GPHY_ID_MT7981                    0x03a29461
- #define MTK_GPHY_ID_MT7988                    0x03a29481
-@@ -208,9 +211,42 @@
- #define MTK_PHY_DA_TX_R50_PAIR_C              0x53f
- #define MTK_PHY_DA_TX_R50_PAIR_D              0x540
-+/* Registers on MDIO_MMD_VEND2 */
-+#define MTK_PHY_LED0_ON_CTRL                  0x24
-+#define MTK_PHY_LED1_ON_CTRL                  0x26
-+#define   MTK_PHY_LED_ON_MASK                 GENMASK(6, 0)
-+#define   MTK_PHY_LED_ON_LINK1000             BIT(0)
-+#define   MTK_PHY_LED_ON_LINK100              BIT(1)
-+#define   MTK_PHY_LED_ON_LINK10                       BIT(2)
-+#define   MTK_PHY_LED_ON_LINKDOWN             BIT(3)
-+#define   MTK_PHY_LED_ON_FDX                  BIT(4) /* Full duplex */
-+#define   MTK_PHY_LED_ON_HDX                  BIT(5) /* Half duplex */
-+#define   MTK_PHY_LED_ON_FORCE_ON             BIT(6)
-+#define   MTK_PHY_LED_ON_POLARITY             BIT(14)
-+#define   MTK_PHY_LED_ON_ENABLE                       BIT(15)
-+
-+#define MTK_PHY_LED0_BLINK_CTRL                       0x25
-+#define MTK_PHY_LED1_BLINK_CTRL                       0x27
-+#define   MTK_PHY_LED_BLINK_1000TX            BIT(0)
-+#define   MTK_PHY_LED_BLINK_1000RX            BIT(1)
-+#define   MTK_PHY_LED_BLINK_100TX             BIT(2)
-+#define   MTK_PHY_LED_BLINK_100RX             BIT(3)
-+#define   MTK_PHY_LED_BLINK_10TX              BIT(4)
-+#define   MTK_PHY_LED_BLINK_10RX              BIT(5)
-+#define   MTK_PHY_LED_BLINK_COLLISION         BIT(6)
-+#define   MTK_PHY_LED_BLINK_RX_CRC_ERR                BIT(7)
-+#define   MTK_PHY_LED_BLINK_RX_IDLE_ERR               BIT(8)
-+#define   MTK_PHY_LED_BLINK_FORCE_BLINK               BIT(9)
-+
-+#define MTK_PHY_LED1_DEFAULT_POLARITIES               BIT(1)
-+
- #define MTK_PHY_RG_BG_RASEL                   0x115
- #define   MTK_PHY_RG_BG_RASEL_MASK            GENMASK(2, 0)
-+/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
-+#define RG_GPIO_MISC_TPBANK0                  0x6f0
-+#define   RG_GPIO_MISC_TPBANK0_BOOTMODE               GENMASK(11, 8)
-+
- /* These macro privides efuse parsing for internal phy. */
- #define EFS_DA_TX_I2MPB_A(x)                  (((x) >> 0) & GENMASK(5, 0))
- #define EFS_DA_TX_I2MPB_B(x)                  (((x) >> 6) & GENMASK(5, 0))
-@@ -238,13 +274,6 @@ enum {
-       PAIR_D,
- };
--enum {
--      GPHY_PORT0,
--      GPHY_PORT1,
--      GPHY_PORT2,
--      GPHY_PORT3,
--};
--
- enum calibration_mode {
-       EFUSE_K,
-       SW_K
-@@ -263,6 +292,19 @@ enum CAL_MODE {
-       SW_M
- };
-+#define MTK_PHY_LED_STATE_FORCE_ON    0
-+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
-+#define MTK_PHY_LED_STATE_NETDEV      2
-+
-+struct mtk_socphy_priv {
-+      unsigned long           led_state;
-+};
-+
-+struct mtk_socphy_shared {
-+      u32                     boottrap;
-+      struct mtk_socphy_priv  priv[4];
-+};
-+
- static int mtk_socphy_read_page(struct phy_device *phydev)
- {
-       return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-@@ -1073,6 +1115,371 @@ static int mt798x_phy_config_init(struct
-       return mt798x_phy_calibration(phydev);
- }
-+static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
-+                                  bool on)
-+{
-+      unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
-+      struct mtk_socphy_priv *priv = phydev->priv;
-+      bool changed;
-+
-+      if (on)
-+              changed = !test_and_set_bit(bit_on, &priv->led_state);
-+      else
-+              changed = !!test_and_clear_bit(bit_on, &priv->led_state);
-+
-+      changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
-+                                      (index ? 16 : 0), &priv->led_state);
-+      if (changed)
-+              return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+                                    MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
-+                                    MTK_PHY_LED_ON_MASK,
-+                                    on ? MTK_PHY_LED_ON_FORCE_ON : 0);
-+      else
-+              return 0;
-+}
-+
-+static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
-+                                     bool blinking)
-+{
-+      unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
-+      struct mtk_socphy_priv *priv = phydev->priv;
-+      bool changed;
-+
-+      if (blinking)
-+              changed = !test_and_set_bit(bit_blink, &priv->led_state);
-+      else
-+              changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
-+
-+      changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
-+                            (index ? 16 : 0), &priv->led_state);
-+      if (changed)
-+              return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
-+                                   MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
-+                                   blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
-+      else
-+              return 0;
-+}
-+
-+static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
-+                                  unsigned long *delay_on,
-+                                  unsigned long *delay_off)
-+{
-+      bool blinking = false;
-+      int err = 0;
-+
-+      if (index > 1)
-+              return -EINVAL;
-+
-+      if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
-+              blinking = true;
-+              *delay_on = 50;
-+              *delay_off = 50;
-+      }
-+
-+      err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
-+      if (err)
-+              return err;
-+
-+      return mt798x_phy_hw_led_on_set(phydev, index, false);
-+}
-+
-+static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
-+                                       u8 index, enum led_brightness value)
-+{
-+      int err;
-+
-+      err = mt798x_phy_hw_led_blink_set(phydev, index, false);
-+      if (err)
-+              return err;
-+
-+      return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
-+}
-+
-+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
-+                                               BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
-+                                               BIT(TRIGGER_NETDEV_LINK)        |
-+                                               BIT(TRIGGER_NETDEV_LINK_10)     |
-+                                               BIT(TRIGGER_NETDEV_LINK_100)    |
-+                                               BIT(TRIGGER_NETDEV_LINK_1000)   |
-+                                               BIT(TRIGGER_NETDEV_RX)          |
-+                                               BIT(TRIGGER_NETDEV_TX));
-+
-+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+                                        unsigned long rules)
-+{
-+      if (index > 1)
-+              return -EINVAL;
-+
-+      /* All combinations of the supported triggers are allowed */
-+      if (rules & ~supported_triggers)
-+              return -EOPNOTSUPP;
-+
-+      return 0;
-+};
-+
-+static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
-+                                       unsigned long *rules)
-+{
-+      unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
-+      unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
-+      unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
-+      struct mtk_socphy_priv *priv = phydev->priv;
-+      int on, blink;
-+
-+      if (index > 1)
-+              return -EINVAL;
-+
-+      on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
-+                        index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
-+
-+      if (on < 0)
-+              return -EIO;
-+
-+      blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
-+                           index ? MTK_PHY_LED1_BLINK_CTRL :
-+                                   MTK_PHY_LED0_BLINK_CTRL);
-+      if (blink < 0)
-+              return -EIO;
-+
-+      if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 |
-+                 MTK_PHY_LED_ON_LINK10)) ||
-+          (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX |
-+                    MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX |
-+                    MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)))
-+              set_bit(bit_netdev, &priv->led_state);
-+      else
-+              clear_bit(bit_netdev, &priv->led_state);
-+
-+      if (on & MTK_PHY_LED_ON_FORCE_ON)
-+              set_bit(bit_on, &priv->led_state);
-+      else
-+              clear_bit(bit_on, &priv->led_state);
-+
-+      if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
-+              set_bit(bit_blink, &priv->led_state);
-+      else
-+              clear_bit(bit_blink, &priv->led_state);
-+
-+      if (!rules)
-+              return 0;
-+
-+      if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10))
-+              *rules |= BIT(TRIGGER_NETDEV_LINK);
-+
-+      if (on & MTK_PHY_LED_ON_LINK10)
-+              *rules |= BIT(TRIGGER_NETDEV_LINK_10);
-+
-+      if (on & MTK_PHY_LED_ON_LINK100)
-+              *rules |= BIT(TRIGGER_NETDEV_LINK_100);
-+
-+      if (on & MTK_PHY_LED_ON_LINK1000)
-+              *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
-+
-+      if (on & MTK_PHY_LED_ON_FDX)
-+              *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
-+
-+      if (on & MTK_PHY_LED_ON_HDX)
-+              *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
-+
-+      if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX))
-+              *rules |= BIT(TRIGGER_NETDEV_RX);
-+
-+      if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))
-+              *rules |= BIT(TRIGGER_NETDEV_TX);
-+
-+      return 0;
-+};
-+
-+static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
-+                                       unsigned long rules)
-+{
-+      unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
-+      struct mtk_socphy_priv *priv = phydev->priv;
-+      u16 on = 0, blink = 0;
-+      int ret;
-+
-+      if (index > 1)
-+              return -EINVAL;
-+
-+      if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
-+              on |= MTK_PHY_LED_ON_FDX;
-+
-+      if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
-+              on |= MTK_PHY_LED_ON_HDX;
-+
-+      if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
-+              on |= MTK_PHY_LED_ON_LINK10;
-+
-+      if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
-+              on |= MTK_PHY_LED_ON_LINK100;
-+
-+      if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
-+              on |= MTK_PHY_LED_ON_LINK1000;
-+
-+      if (rules & BIT(TRIGGER_NETDEV_RX)) {
-+              blink |= MTK_PHY_LED_BLINK_10RX  |
-+                       MTK_PHY_LED_BLINK_100RX |
-+                       MTK_PHY_LED_BLINK_1000RX;
-+      }
-+
-+      if (rules & BIT(TRIGGER_NETDEV_TX)) {
-+              blink |= MTK_PHY_LED_BLINK_10TX  |
-+                       MTK_PHY_LED_BLINK_100TX |
-+                       MTK_PHY_LED_BLINK_1000TX;
-+      }
-+
-+      if (blink || on)
-+              set_bit(bit_netdev, &priv->led_state);
-+      else
-+              clear_bit(bit_netdev, &priv->led_state);
-+
-+      ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+                              MTK_PHY_LED1_ON_CTRL :
-+                              MTK_PHY_LED0_ON_CTRL,
-+                           MTK_PHY_LED_ON_FDX     |
-+                           MTK_PHY_LED_ON_HDX     |
-+                           MTK_PHY_LED_ON_LINK10  |
-+                           MTK_PHY_LED_ON_LINK100 |
-+                           MTK_PHY_LED_ON_LINK1000,
-+                           on);
-+
-+      if (ret)
-+              return ret;
-+
-+      return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
-+                              MTK_PHY_LED1_BLINK_CTRL :
-+                              MTK_PHY_LED0_BLINK_CTRL, blink);
-+};
-+
-+static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
-+{
-+      struct mtk_socphy_shared *priv = phydev->shared->priv;
-+      u32 polarities;
-+
-+      if (led_num == 0)
-+              polarities = ~(priv->boottrap);
-+      else
-+              polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
-+
-+      if (polarities & BIT(phydev->mdio.addr))
-+              return true;
-+
-+      return false;
-+}
-+
-+static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
-+{
-+      struct pinctrl *pinctrl;
-+      int index;
-+
-+      /* Setup LED polarity according to bootstrap use of LED pins */
-+      for (index = 0; index < 2; ++index)
-+              phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+                              MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
-+                             MTK_PHY_LED_ON_POLARITY,
-+                             mt7988_phy_led_get_polarity(phydev, index) ?
-+                              MTK_PHY_LED_ON_POLARITY : 0);
-+
-+      /* Only now setup pinctrl to avoid bogus blinking */
-+      pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
-+      if (IS_ERR(pinctrl))
-+              dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
-+
-+      return 0;
-+}
-+
-+static int mt7988_phy_probe_shared(struct phy_device *phydev)
-+{
-+      struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
-+      struct mtk_socphy_shared *shared = phydev->shared->priv;
-+      struct regmap *regmap;
-+      u32 reg;
-+      int ret;
-+
-+      /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
-+       * LED_C and LED_D respectively. At the same time those pins are used to
-+       * bootstrap configuration of the reference clock source (LED_A),
-+       * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
-+       * In practise this is done using a LED and a resistor pulling the pin
-+       * either to GND or to VIO.
-+       * The detected value at boot time is accessible at run-time using the
-+       * TPBANK0 register located in the gpio base of the pinctrl, in order
-+       * to read it here it needs to be referenced by a phandle called
-+       * 'mediatek,pio' in the MDIO bus hosting the PHY.
-+       * The 4 bits in TPBANK0 are kept as package shared data and are used to
-+       * set LED polarity for each of the LED0.
-+       */
-+      regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
-+      if (IS_ERR(regmap))
-+              return PTR_ERR(regmap);
-+
-+      ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, &reg);
-+      if (ret)
-+              return ret;
-+
-+      shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
-+
-+      return 0;
-+}
-+
-+static void mt798x_phy_leds_state_init(struct phy_device *phydev)
-+{
-+      int i;
-+
-+      for (i = 0; i < 2; ++i)
-+              mt798x_phy_led_hw_control_get(phydev, i, NULL);
-+}
-+
-+static int mt7988_phy_probe(struct phy_device *phydev)
-+{
-+      struct mtk_socphy_shared *shared;
-+      struct mtk_socphy_priv *priv;
-+      int err;
-+
-+      if (phydev->mdio.addr > 3)
-+              return -EINVAL;
-+
-+      err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
-+                                  sizeof(struct mtk_socphy_shared));
-+      if (err)
-+              return err;
-+
-+      if (phy_package_probe_once(phydev)) {
-+              err = mt7988_phy_probe_shared(phydev);
-+              if (err)
-+                      return err;
-+      }
-+
-+      shared = phydev->shared->priv;
-+      priv = &shared->priv[phydev->mdio.addr];
-+
-+      phydev->priv = priv;
-+
-+      mt798x_phy_leds_state_init(phydev);
-+
-+      err = mt7988_phy_fix_leds_polarities(phydev);
-+      if (err)
-+              return err;
-+
-+      return mt798x_phy_calibration(phydev);
-+}
-+
-+static int mt7981_phy_probe(struct phy_device *phydev)
-+{
-+      struct mtk_socphy_priv *priv;
-+
-+      priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
-+                          GFP_KERNEL);
-+      if (!priv)
-+              return -ENOMEM;
-+
-+      phydev->priv = priv;
-+
-+      mt798x_phy_leds_state_init(phydev);
-+
-+      return mt798x_phy_calibration(phydev);
-+}
-+
- static struct phy_driver mtk_socphy_driver[] = {
-       {
-               PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
-@@ -1080,11 +1487,16 @@ static struct phy_driver mtk_socphy_driv
-               .config_init    = mt798x_phy_config_init,
-               .config_intr    = genphy_no_config_intr,
-               .handle_interrupt = genphy_handle_interrupt_no_ack,
--              .probe          = mt798x_phy_calibration,
-+              .probe          = mt7981_phy_probe,
-               .suspend        = genphy_suspend,
-               .resume         = genphy_resume,
-               .read_page      = mtk_socphy_read_page,
-               .write_page     = mtk_socphy_write_page,
-+              .led_blink_set  = mt798x_phy_led_blink_set,
-+              .led_brightness_set = mt798x_phy_led_brightness_set,
-+              .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
-+              .led_hw_control_set = mt798x_phy_led_hw_control_set,
-+              .led_hw_control_get = mt798x_phy_led_hw_control_get,
-       },
-       {
-               PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
-@@ -1092,11 +1504,16 @@ static struct phy_driver mtk_socphy_driv
-               .config_init    = mt798x_phy_config_init,
-               .config_intr    = genphy_no_config_intr,
-               .handle_interrupt = genphy_handle_interrupt_no_ack,
--              .probe          = mt798x_phy_calibration,
-+              .probe          = mt7988_phy_probe,
-               .suspend        = genphy_suspend,
-               .resume         = genphy_resume,
-               .read_page      = mtk_socphy_read_page,
-               .write_page     = mtk_socphy_write_page,
-+              .led_blink_set  = mt798x_phy_led_blink_set,
-+              .led_brightness_set = mt798x_phy_led_brightness_set,
-+              .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
-+              .led_hw_control_set = mt798x_phy_led_hw_control_set,
-+              .led_hw_control_get = mt798x_phy_led_hw_control_get,
-       },
- };
diff --git a/target/linux/mediatek/patches-6.6/804-v6.2-pwm-add-mt7986-support.patch b/target/linux/mediatek/patches-6.6/804-v6.2-pwm-add-mt7986-support.patch
deleted file mode 100644 (file)
index 0c73d52..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/pwm/pwm-mediatek.c
-+++ b/drivers/pwm/pwm-mediatek.c
-@@ -329,6 +329,12 @@ static const struct pwm_mediatek_of_data
-       .has_ck_26m_sel = true,
- };
-+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
-+      .num_pwms = 2,
-+      .pwm45_fixup = false,
-+      .has_ck_26m_sel = true,
-+};
-+
- static const struct pwm_mediatek_of_data mt8516_pwm_data = {
-       .num_pwms = 5,
-       .pwm45_fixup = false,
-@@ -342,6 +348,7 @@ static const struct of_device_id pwm_med
-       { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
-       { .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
-       { .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
-+      { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
-       { .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
-       { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
-       { .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
diff --git a/target/linux/mediatek/patches-6.6/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch b/target/linux/mediatek/patches-6.6/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch
deleted file mode 100644 (file)
index f130fdb..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-From fae82621ac33e2a4a96220c56e90d1ec6237d394 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:01:12 +0100
-Subject: [PATCH] pinctrl: mediatek: extend pinctrl-moore to support new bias
- functions
-
-Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
-introduced SoC specify 'pull_type' attribute to mtk_pinconf_bias_set_combo
-and mtk_pinconf_bias_get_combo, and make the functions able to support
-almost all Mediatek SoCs that use pinctrl-mtk-common-v2.c.
-
-This patch enables pinctrl_moore to support these functions.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106080114.7426-6-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-moore.c | 49 ++++++++++++++++++++----
- 1 file changed, 42 insertions(+), 7 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-moore.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
-@@ -8,6 +8,7 @@
-  *
-  */
-+#include <dt-bindings/pinctrl/mt65xx.h>
- #include <linux/gpio/driver.h>
- #include "pinctrl-moore.h"
-@@ -105,7 +106,7 @@ static int mtk_pinconf_get(struct pinctr
- {
-       struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-       u32 param = pinconf_to_config_param(*config);
--      int val, val2, err, reg, ret = 1;
-+      int val, val2, err, pullup, reg, ret = 1;
-       const struct mtk_pin_desc *desc;
-       desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-@@ -114,7 +115,13 @@ static int mtk_pinconf_get(struct pinctr
-       switch (param) {
-       case PIN_CONFIG_BIAS_DISABLE:
--              if (hw->soc->bias_disable_get) {
-+              if (hw->soc->bias_get_combo) {
-+                      err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+                      if (err)
-+                              return err;
-+                      if (ret != MTK_PUPD_SET_R1R0_00 && ret != MTK_DISABLE)
-+                              return -EINVAL;
-+              } else if (hw->soc->bias_disable_get) {
-                       err = hw->soc->bias_disable_get(hw, desc, &ret);
-                       if (err)
-                               return err;
-@@ -123,7 +130,15 @@ static int mtk_pinconf_get(struct pinctr
-               }
-               break;
-       case PIN_CONFIG_BIAS_PULL_UP:
--              if (hw->soc->bias_get) {
-+              if (hw->soc->bias_get_combo) {
-+                      err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+                      if (err)
-+                              return err;
-+                      if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE)
-+                              return -EINVAL;
-+                      if (!pullup)
-+                              return -EINVAL;
-+              } else if (hw->soc->bias_get) {
-                       err = hw->soc->bias_get(hw, desc, 1, &ret);
-                       if (err)
-                               return err;
-@@ -132,7 +147,15 @@ static int mtk_pinconf_get(struct pinctr
-               }
-               break;
-       case PIN_CONFIG_BIAS_PULL_DOWN:
--              if (hw->soc->bias_get) {
-+              if (hw->soc->bias_get_combo) {
-+                      err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+                      if (err)
-+                              return err;
-+                      if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE)
-+                              return -EINVAL;
-+                      if (pullup)
-+                              return -EINVAL;
-+              } else if (hw->soc->bias_get) {
-                       err = hw->soc->bias_get(hw, desc, 0, &ret);
-                       if (err)
-                               return err;
-@@ -235,7 +258,11 @@ static int mtk_pinconf_set(struct pinctr
-               switch (param) {
-               case PIN_CONFIG_BIAS_DISABLE:
--                      if (hw->soc->bias_disable_set) {
-+                      if (hw->soc->bias_set_combo) {
-+                              err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
-+                              if (err)
-+                                      return err;
-+                      } else if (hw->soc->bias_disable_set) {
-                               err = hw->soc->bias_disable_set(hw, desc);
-                               if (err)
-                                       return err;
-@@ -244,7 +271,11 @@ static int mtk_pinconf_set(struct pinctr
-                       }
-                       break;
-               case PIN_CONFIG_BIAS_PULL_UP:
--                      if (hw->soc->bias_set) {
-+                      if (hw->soc->bias_set_combo) {
-+                              err = hw->soc->bias_set_combo(hw, desc, 1, arg);
-+                              if (err)
-+                                      return err;
-+                      } else if (hw->soc->bias_set) {
-                               err = hw->soc->bias_set(hw, desc, 1);
-                               if (err)
-                                       return err;
-@@ -253,7 +284,11 @@ static int mtk_pinconf_set(struct pinctr
-                       }
-                       break;
-               case PIN_CONFIG_BIAS_PULL_DOWN:
--                      if (hw->soc->bias_set) {
-+                      if (hw->soc->bias_set_combo) {
-+                              err = hw->soc->bias_set_combo(hw, desc, 0, arg);
-+                              if (err)
-+                                      return err;
-+                      } else if (hw->soc->bias_set) {
-                               err = hw->soc->bias_set(hw, desc, 0);
-                               if (err)
-                                       return err;
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch b/target/linux/mediatek/patches-6.6/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch
deleted file mode 100644 (file)
index 694b73a..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From f167da186acf90847e1a6d3716e253825a6218ec Mon Sep 17 00:00:00 2001
-From: Randy Dunlap <rdunlap@infradead.org>
-Date: Thu, 12 Jan 2023 22:44:49 -0800
-Subject: [PATCH 01/42] thermal/drivers/mtk_thermal: Fix kernel-doc function
- name
-
-Use the correct function name in a kernel-doc comment to prevent
-a warning:
-
-drivers/thermal/mtk_thermal.c:562: warning: expecting prototype for raw_to_mcelsius(). Prototype was for raw_to_mcelsius_v1() instead
-
-Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
-Cc: "Rafael J. Wysocki" <rafael@kernel.org>
-Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
-Cc: Amit Kucheria <amitk@kernel.org>
-Cc: Zhang Rui <rui.zhang@intel.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
-Cc: linux-pm@vger.kernel.org
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: linux-mediatek@lists.infradead.org
-Link: https://lore.kernel.org/r/20230113064449.15061-1-rdunlap@infradead.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -550,7 +550,7 @@ static const struct mtk_thermal_data mt8
- };
- /**
-- * raw_to_mcelsius - convert a raw ADC value to mcelsius
-+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-  * @mt:       The thermal controller
-  * @sensno:   sensor number
-  * @raw:      raw ADC value
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch b/target/linux/mediatek/patches-6.6/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch
deleted file mode 100644 (file)
index aaed9d7..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 255509232417ee71fd606cb957d44cf6544f0c43 Mon Sep 17 00:00:00 2001
-From: ye xingchen <ye.xingchen@zte.com.cn>
-Date: Wed, 18 Jan 2023 16:37:47 +0800
-Subject: [PATCH 02/42] thermal/drivers/mtk_thermal: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
-Link: https://lore.kernel.org/r/202301181637472073620@zte.com.cn
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -990,7 +990,6 @@ static int mtk_thermal_probe(struct plat
-       int ret, i, ctrl_id;
-       struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
-       struct mtk_thermal *mt;
--      struct resource *res;
-       u64 auxadc_phys_base, apmixed_phys_base;
-       struct thermal_zone_device *tzdev;
-       void __iomem *apmixed_base, *auxadc_base;
-@@ -1009,8 +1008,7 @@ static int mtk_thermal_probe(struct plat
-       if (IS_ERR(mt->clk_auxadc))
-               return PTR_ERR(mt->clk_auxadc);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
-+      mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-       if (IS_ERR(mt->thermal_base))
-               return PTR_ERR(mt->thermal_base);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch b/target/linux/mediatek/patches-6.6/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch
deleted file mode 100644 (file)
index 215b0fd..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-From ca86dbd309ba03bef38ae91f037e2030bb671ab7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Jan 2023 15:40:39 +0000
-Subject: [PATCH 03/42] thermal/drivers/mtk: Use function pointer for
- raw_to_mcelsius
-
-Instead of having if-else logic selecting either raw_to_mcelsius_v1 or
-raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function
-pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the
-probe function.
-
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Link: https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 17 ++++++++++-------
- 1 file changed, 10 insertions(+), 7 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -292,6 +292,8 @@ struct mtk_thermal {
-       const struct mtk_thermal_data *conf;
-       struct mtk_thermal_bank banks[MAX_NUM_ZONES];
-+
-+      int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
- };
- /* MT8183 thermal sensor data */
-@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature(
-       for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-               raw = readl(mt->thermal_base + conf->msr[i]);
--              if (mt->conf->version == MTK_THERMAL_V1) {
--                      temp = raw_to_mcelsius_v1(
--                              mt, conf->bank_data[bank->id].sensors[i], raw);
--              } else {
--                      temp = raw_to_mcelsius_v2(
--                              mt, conf->bank_data[bank->id].sensors[i], raw);
--              }
-+              temp = mt->raw_to_mcelsius(
-+                      mt, conf->bank_data[bank->id].sensors[i], raw);
-+
-               /*
-                * The first read of a sensor often contains very high bogus
-@@ -1073,6 +1071,11 @@ static int mtk_thermal_probe(struct plat
-               mtk_thermal_release_periodic_ts(mt, auxadc_base);
-       }
-+      if (mt->conf->version == MTK_THERMAL_V1)
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-+      else
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+
-       for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
-               for (i = 0; i < mt->conf->num_banks; i++)
-                       mtk_thermal_init_bank(mt, i, apmixed_phys_base,
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch b/target/linux/mediatek/patches-6.6/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch
deleted file mode 100644 (file)
index ef20067..0000000
+++ /dev/null
@@ -1,236 +0,0 @@
-From aec1d89dccc7cba04fdb3e52dfda328f3302ba17 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Jan 2023 15:40:58 +0000
-Subject: [PATCH 04/42] thermal/drivers/mtk: Add support for MT7986 and MT7981
-
-Add support for V3 generation thermal found in MT7986 and MT7981 SoCs.
-Brings code to assign values from efuse as well as new function to
-convert raw temperature to millidegree celsius, as found in MediaTek's
-SDK sources (but cleaned up and de-duplicated)
-
-[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/baf36c7eef477aae1f8f2653b6c29e2caf48475b
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/2d341fc45266217249586eb4bd3be3ac4ca83a12.1674055882.git.daniel@makrotopia.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 128 ++++++++++++++++++++++++++++++++--
- 1 file changed, 124 insertions(+), 4 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -150,6 +150,20 @@
- #define CALIB_BUF1_VALID_V2(x)                (((x) >> 4) & 0x1)
- #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros can be used for MT7981 and MT7986.
-+ */
-+#define CALIB_BUF0_ADC_GE_V3(x)               (((x) >> 0) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V3(x)    (((x) >> 20) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V3(x)      (((x) >> 26) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V3(x)      (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V3(x)      (((x) >> 21) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V3(x)    (((x) >> 9) & 0x1ff)
-+#define CALIB_BUF1_VALID_V3(x)                (((x) >> 18) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
-+#define CALIB_BUF1_ID_V3(x)           (((x) >> 20) & 0x1)
-+
- enum {
-       VTS1,
-       VTS2,
-@@ -163,6 +177,7 @@ enum {
- enum mtk_thermal_version {
-       MTK_THERMAL_V1 = 1,
-       MTK_THERMAL_V2,
-+      MTK_THERMAL_V3,
- };
- /* MT2701 thermal sensors */
-@@ -245,6 +260,27 @@ enum mtk_thermal_version {
- /* The calibration coefficient of sensor  */
- #define MT8183_CALIBRATION    153
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT7986_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT7986 */
-+#define MT7986_NUM_SENSORS            1
-+
-+/* The number of banks in the MT7986 */
-+#define MT7986_NUM_ZONES              1
-+
-+/* The number of sensing points per bank */
-+#define MT7986_NUM_SENSORS_PER_ZONE   1
-+
-+/* MT7986 thermal sensors */
-+#define MT7986_TS1                    0
-+
-+/* The number of controller in the MT7986 */
-+#define MT7986_NUM_CONTROLLER         1
-+
-+/* The calibration coefficient of sensor  */
-+#define MT7986_CALIBRATION            165
-+
- struct mtk_thermal;
- struct thermal_bank_cfg {
-@@ -388,6 +424,14 @@ static const int mt7622_mux_values[MT762
- static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
- static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
-+/* MT7986 thermal sensor data */
-+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
-+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
-+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
-+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-+
- /*
-  * The MT8173 thermal controller has four banks. Each bank can read up to
-  * four temperature sensors simultaneously. The MT8173 has a total of 5
-@@ -551,6 +595,30 @@ static const struct mtk_thermal_data mt8
-       .version = MTK_THERMAL_V1,
- };
-+/*
-+ * MT7986 uses AUXADC Channel 11 for raw data access.
-+ */
-+static const struct mtk_thermal_data mt7986_thermal_data = {
-+      .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT7986_NUM_ZONES,
-+      .num_sensors = MT7986_NUM_SENSORS,
-+      .vts_index = mt7986_vts_index,
-+      .cali_val = MT7986_CALIBRATION,
-+      .num_controller = MT7986_NUM_CONTROLLER,
-+      .controller_offset = mt7986_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 1,
-+                      .sensors = mt7986_bank_data,
-+              },
-+      },
-+      .msr = mt7986_msr,
-+      .adcpnp = mt7986_adcpnp,
-+      .sensor_mux_values = mt7986_mux_values,
-+      .version = MTK_THERMAL_V3,
-+};
-+
- /**
-  * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-  * @mt:       The thermal controller
-@@ -605,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk
-       return (format_2 - tmp) * 100;
- }
-+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+      s32 tmp;
-+
-+      if (raw == 0)
-+              return 0;
-+
-+      raw &= 0xfff;
-+      tmp = 100000 * 15 / 16 * 10000;
-+      tmp /= 4096 - 512 + mt->adc_ge;
-+      tmp /= 1490;
-+      tmp *= raw - mt->vts[sensno] - 2900;
-+
-+      return mt->degc_cali * 500 - tmp;
-+}
-+
- /**
-  * mtk_thermal_get_bank - get bank
-  * @bank:     The bank
-@@ -885,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2(
-       return 0;
- }
-+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
-+{
-+      if (!CALIB_BUF1_VALID_V3(buf[1]))
-+              return -EINVAL;
-+
-+      mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
-+      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
-+      mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
-+      mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
-+      mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
-+      mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
-+      mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
-+
-+      if (CALIB_BUF1_ID_V3(buf[1]) == 0)
-+              mt->o_slope = 0;
-+
-+      return 0;
-+}
-+
- static int mtk_thermal_get_calibration_data(struct device *dev,
-                                           struct mtk_thermal *mt)
- {
-@@ -895,6 +998,7 @@ static int mtk_thermal_get_calibration_d
-       /* Start with default values */
-       mt->adc_ge = 512;
-+      mt->adc_oe = 512;
-       for (i = 0; i < mt->conf->num_sensors; i++)
-               mt->vts[i] = 260;
-       mt->degc_cali = 40;
-@@ -920,10 +1024,20 @@ static int mtk_thermal_get_calibration_d
-               goto out;
-       }
--      if (mt->conf->version == MTK_THERMAL_V1)
-+      switch (mt->conf->version) {
-+      case MTK_THERMAL_V1:
-               ret = mtk_thermal_extract_efuse_v1(mt, buf);
--      else
-+              break;
-+      case MTK_THERMAL_V2:
-               ret = mtk_thermal_extract_efuse_v2(mt, buf);
-+              break;
-+      case MTK_THERMAL_V3:
-+              ret = mtk_thermal_extract_efuse_v3(mt, buf);
-+              break;
-+      default:
-+              ret = -EINVAL;
-+              break;
-+      }
-       if (ret) {
-               dev_info(dev, "Device not calibrated, using default calibration values\n");
-@@ -954,6 +1068,10 @@ static const struct of_device_id mtk_the
-               .data = (void *)&mt7622_thermal_data,
-       },
-       {
-+              .compatible = "mediatek,mt7986-thermal",
-+              .data = (void *)&mt7986_thermal_data,
-+      },
-+      {
-               .compatible = "mediatek,mt8183-thermal",
-               .data = (void *)&mt8183_thermal_data,
-       }, {
-@@ -1066,15 +1184,17 @@ static int mtk_thermal_probe(struct plat
-               goto err_disable_clk_auxadc;
-       }
--      if (mt->conf->version == MTK_THERMAL_V2) {
-+      if (mt->conf->version != MTK_THERMAL_V1) {
-               mtk_thermal_turn_on_buffer(apmixed_base);
-               mtk_thermal_release_periodic_ts(mt, auxadc_base);
-       }
-       if (mt->conf->version == MTK_THERMAL_V1)
-               mt->raw_to_mcelsius = raw_to_mcelsius_v1;
--      else
-+      else if (mt->conf->version == MTK_THERMAL_V2)
-               mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+      else
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v3;
-       for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
-               for (i = 0; i < mt->conf->num_banks; i++)
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch b/target/linux/mediatek/patches-6.6/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch
deleted file mode 100644 (file)
index e102a33..0000000
+++ /dev/null
@@ -1,2602 +0,0 @@
-From 5e3aac197a74914ccec2732a89c29d960730d28f Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:23 +0100
-Subject: [PATCH 05/42] thermal/drivers/mediatek: Relocate driver to mediatek
- folder
-
-Add MediaTek proprietary folder to upstream more thermal zone and cooler
-drivers, relocate the original thermal controller driver to it, and rename it
-as "auxadc_thermal.c" to show its purpose more clearly.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230209105628.50294-2-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/Kconfig                       | 14 ++++---------
- drivers/thermal/Makefile                      |  2 +-
- drivers/thermal/mediatek/Kconfig              | 21 +++++++++++++++++++
- drivers/thermal/mediatek/Makefile             |  1 +
- .../auxadc_thermal.c}                         |  2 +-
- 5 files changed, 28 insertions(+), 12 deletions(-)
- create mode 100644 drivers/thermal/mediatek/Kconfig
- create mode 100644 drivers/thermal/mediatek/Makefile
- rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%)
-
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -412,16 +412,10 @@ config DA9062_THERMAL
-         zone.
-         Compatible with the DA9062 and DA9061 PMICs.
--config MTK_THERMAL
--      tristate "Temperature sensor driver for mediatek SoCs"
--      depends on ARCH_MEDIATEK || COMPILE_TEST
--      depends on HAS_IOMEM
--      depends on NVMEM || NVMEM=n
--      depends on RESET_CONTROLLER
--      default y
--      help
--        Enable this option if you want to have support for thermal management
--        controller present in Mediatek SoCs
-+menu "Mediatek thermal drivers"
-+depends on ARCH_MEDIATEK || COMPILE_TEST
-+source "drivers/thermal/mediatek/Kconfig"
-+endmenu
- config AMLOGIC_THERMAL
-       tristate "Amlogic Thermal Support"
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -55,7 +55,7 @@ obj-y                                += st/
- obj-y                         += qcom/
- obj-y                         += tegra/
- obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
--obj-$(CONFIG_MTK_THERMAL)     += mtk_thermal.o
-+obj-y                         += mediatek/
- obj-$(CONFIG_GENERIC_ADC_THERMAL)     += thermal-generic-adc.o
- obj-$(CONFIG_UNIPHIER_THERMAL)        += uniphier_thermal.o
- obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
---- /dev/null
-+++ b/drivers/thermal/mediatek/Kconfig
-@@ -0,0 +1,21 @@
-+config MTK_THERMAL
-+      tristate "MediaTek thermal drivers"
-+      depends on THERMAL_OF
-+      help
-+        This is the option for MediaTek thermal software solutions.
-+        Please enable corresponding options to get temperature
-+        information from thermal sensors or turn on throttle
-+        mechaisms for thermal mitigation.
-+
-+if MTK_THERMAL
-+
-+config MTK_SOC_THERMAL
-+      tristate "AUXADC temperature sensor driver for MediaTek SoCs"
-+      depends on HAS_IOMEM
-+      help
-+        Enable this option if you want to get SoC temperature
-+        information for MediaTek platforms.
-+        This driver configures thermal controllers to collect
-+        temperature via AUXADC interface.
-+
-+endif
---- /dev/null
-+++ b/drivers/thermal/mediatek/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o
---- a/drivers/thermal/mtk_thermal.c
-+++ /dev/null
-@@ -1,1254 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (c) 2015 MediaTek Inc.
-- * Author: Hanyi Wu <hanyi.wu@mediatek.com>
-- *         Sascha Hauer <s.hauer@pengutronix.de>
-- *         Dawei Chien <dawei.chien@mediatek.com>
-- *         Louis Yu <louis.yu@mediatek.com>
-- */
--
--#include <linux/clk.h>
--#include <linux/delay.h>
--#include <linux/interrupt.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/nvmem-consumer.h>
--#include <linux/of.h>
--#include <linux/of_address.h>
--#include <linux/of_device.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/io.h>
--#include <linux/thermal.h>
--#include <linux/reset.h>
--#include <linux/types.h>
--
--#include "thermal_hwmon.h"
--
--/* AUXADC Registers */
--#define AUXADC_CON1_SET_V     0x008
--#define AUXADC_CON1_CLR_V     0x00c
--#define AUXADC_CON2_V         0x010
--#define AUXADC_DATA(channel)  (0x14 + (channel) * 4)
--
--#define APMIXED_SYS_TS_CON1   0x604
--
--/* Thermal Controller Registers */
--#define TEMP_MONCTL0          0x000
--#define TEMP_MONCTL1          0x004
--#define TEMP_MONCTL2          0x008
--#define TEMP_MONIDET0         0x014
--#define TEMP_MONIDET1         0x018
--#define TEMP_MSRCTL0          0x038
--#define TEMP_MSRCTL1          0x03c
--#define TEMP_AHBPOLL          0x040
--#define TEMP_AHBTO            0x044
--#define TEMP_ADCPNP0          0x048
--#define TEMP_ADCPNP1          0x04c
--#define TEMP_ADCPNP2          0x050
--#define TEMP_ADCPNP3          0x0b4
--
--#define TEMP_ADCMUX           0x054
--#define TEMP_ADCEN            0x060
--#define TEMP_PNPMUXADDR               0x064
--#define TEMP_ADCMUXADDR               0x068
--#define TEMP_ADCENADDR                0x074
--#define TEMP_ADCVALIDADDR     0x078
--#define TEMP_ADCVOLTADDR      0x07c
--#define TEMP_RDCTRL           0x080
--#define TEMP_ADCVALIDMASK     0x084
--#define TEMP_ADCVOLTAGESHIFT  0x088
--#define TEMP_ADCWRITECTRL     0x08c
--#define TEMP_MSR0             0x090
--#define TEMP_MSR1             0x094
--#define TEMP_MSR2             0x098
--#define TEMP_MSR3             0x0B8
--
--#define TEMP_SPARE0           0x0f0
--
--#define TEMP_ADCPNP0_1          0x148
--#define TEMP_ADCPNP1_1          0x14c
--#define TEMP_ADCPNP2_1          0x150
--#define TEMP_MSR0_1             0x190
--#define TEMP_MSR1_1             0x194
--#define TEMP_MSR2_1             0x198
--#define TEMP_ADCPNP3_1          0x1b4
--#define TEMP_MSR3_1             0x1B8
--
--#define PTPCORESEL            0x400
--
--#define TEMP_MONCTL1_PERIOD_UNIT(x)   ((x) & 0x3ff)
--
--#define TEMP_MONCTL2_FILTER_INTERVAL(x)       (((x) & 0x3ff) << 16)
--#define TEMP_MONCTL2_SENSOR_INTERVAL(x)       ((x) & 0x3ff)
--
--#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)     (x)
--
--#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE               BIT(0)
--#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE               BIT(1)
--
--#define TEMP_ADCVALIDMASK_VALID_HIGH          BIT(5)
--#define TEMP_ADCVALIDMASK_VALID_POS(bit)      (bit)
--
--/* MT8173 thermal sensors */
--#define MT8173_TS1    0
--#define MT8173_TS2    1
--#define MT8173_TS3    2
--#define MT8173_TS4    3
--#define MT8173_TSABB  4
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT8173_TEMP_AUXADC_CHANNEL    11
--
--/* The total number of temperature sensors in the MT8173 */
--#define MT8173_NUM_SENSORS            5
--
--/* The number of banks in the MT8173 */
--#define MT8173_NUM_ZONES              4
--
--/* The number of sensing points per bank */
--#define MT8173_NUM_SENSORS_PER_ZONE   4
--
--/* The number of controller in the MT8173 */
--#define MT8173_NUM_CONTROLLER         1
--
--/* The calibration coefficient of sensor  */
--#define MT8173_CALIBRATION    165
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-- * MT8183 has 6 sensors and needs 6 VTS calibration data.
-- * MT8173 has 5 sensors and needs 5 VTS calibration data.
-- * MT2701 has 3 sensors and needs 3 VTS calibration data.
-- * MT2712 has 4 sensors and needs 4 VTS calibration data.
-- */
--#define CALIB_BUF0_VALID_V1           BIT(0)
--#define CALIB_BUF1_ADC_GE_V1(x)               (((x) >> 22) & 0x3ff)
--#define CALIB_BUF0_VTS_TS1_V1(x)      (((x) >> 17) & 0x1ff)
--#define CALIB_BUF0_VTS_TS2_V1(x)      (((x) >> 8) & 0x1ff)
--#define CALIB_BUF1_VTS_TS3_V1(x)      (((x) >> 0) & 0x1ff)
--#define CALIB_BUF2_VTS_TS4_V1(x)      (((x) >> 23) & 0x1ff)
--#define CALIB_BUF2_VTS_TS5_V1(x)      (((x) >> 5) & 0x1ff)
--#define CALIB_BUF2_VTS_TSABB_V1(x)    (((x) >> 14) & 0x1ff)
--#define CALIB_BUF0_DEGC_CALI_V1(x)    (((x) >> 1) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V1(x)      (((x) >> 26) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
--#define CALIB_BUF1_ID_V1(x)           (((x) >> 9) & 0x1)
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros could be used for MT7622.
-- */
--#define CALIB_BUF0_ADC_OE_V2(x)               (((x) >> 22) & 0x3ff)
--#define CALIB_BUF0_ADC_GE_V2(x)               (((x) >> 12) & 0x3ff)
--#define CALIB_BUF0_DEGC_CALI_V2(x)    (((x) >> 6) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V2(x)      (((x) >> 0) & 0x3f)
--#define CALIB_BUF1_VTS_TS1_V2(x)      (((x) >> 23) & 0x1ff)
--#define CALIB_BUF1_VTS_TS2_V2(x)      (((x) >> 14) & 0x1ff)
--#define CALIB_BUF1_VTS_TSABB_V2(x)    (((x) >> 5) & 0x1ff)
--#define CALIB_BUF1_VALID_V2(x)                (((x) >> 4) & 0x1)
--#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros can be used for MT7981 and MT7986.
-- */
--#define CALIB_BUF0_ADC_GE_V3(x)               (((x) >> 0) & 0x3ff)
--#define CALIB_BUF0_DEGC_CALI_V3(x)    (((x) >> 20) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V3(x)      (((x) >> 26) & 0x3f)
--#define CALIB_BUF1_VTS_TS1_V3(x)      (((x) >> 0) & 0x1ff)
--#define CALIB_BUF1_VTS_TS2_V3(x)      (((x) >> 21) & 0x1ff)
--#define CALIB_BUF1_VTS_TSABB_V3(x)    (((x) >> 9) & 0x1ff)
--#define CALIB_BUF1_VALID_V3(x)                (((x) >> 18) & 0x1)
--#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
--#define CALIB_BUF1_ID_V3(x)           (((x) >> 20) & 0x1)
--
--enum {
--      VTS1,
--      VTS2,
--      VTS3,
--      VTS4,
--      VTS5,
--      VTSABB,
--      MAX_NUM_VTS,
--};
--
--enum mtk_thermal_version {
--      MTK_THERMAL_V1 = 1,
--      MTK_THERMAL_V2,
--      MTK_THERMAL_V3,
--};
--
--/* MT2701 thermal sensors */
--#define MT2701_TS1    0
--#define MT2701_TS2    1
--#define MT2701_TSABB  2
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT2701_TEMP_AUXADC_CHANNEL    11
--
--/* The total number of temperature sensors in the MT2701 */
--#define MT2701_NUM_SENSORS    3
--
--/* The number of sensing points per bank */
--#define MT2701_NUM_SENSORS_PER_ZONE   3
--
--/* The number of controller in the MT2701 */
--#define MT2701_NUM_CONTROLLER         1
--
--/* The calibration coefficient of sensor  */
--#define MT2701_CALIBRATION    165
--
--/* MT2712 thermal sensors */
--#define MT2712_TS1    0
--#define MT2712_TS2    1
--#define MT2712_TS3    2
--#define MT2712_TS4    3
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT2712_TEMP_AUXADC_CHANNEL    11
--
--/* The total number of temperature sensors in the MT2712 */
--#define MT2712_NUM_SENSORS    4
--
--/* The number of sensing points per bank */
--#define MT2712_NUM_SENSORS_PER_ZONE   4
--
--/* The number of controller in the MT2712 */
--#define MT2712_NUM_CONTROLLER         1
--
--/* The calibration coefficient of sensor  */
--#define MT2712_CALIBRATION    165
--
--#define MT7622_TEMP_AUXADC_CHANNEL    11
--#define MT7622_NUM_SENSORS            1
--#define MT7622_NUM_ZONES              1
--#define MT7622_NUM_SENSORS_PER_ZONE   1
--#define MT7622_TS1    0
--#define MT7622_NUM_CONTROLLER         1
--
--/* The maximum number of banks */
--#define MAX_NUM_ZONES         8
--
--/* The calibration coefficient of sensor  */
--#define MT7622_CALIBRATION    165
--
--/* MT8183 thermal sensors */
--#define MT8183_TS1    0
--#define MT8183_TS2    1
--#define MT8183_TS3    2
--#define MT8183_TS4    3
--#define MT8183_TS5    4
--#define MT8183_TSABB  5
--
--/* AUXADC channel  is used for the temperature sensors */
--#define MT8183_TEMP_AUXADC_CHANNEL    11
--
--/* The total number of temperature sensors in the MT8183 */
--#define MT8183_NUM_SENSORS    6
--
--/* The number of banks in the MT8183 */
--#define MT8183_NUM_ZONES               1
--
--/* The number of sensing points per bank */
--#define MT8183_NUM_SENSORS_PER_ZONE    6
--
--/* The number of controller in the MT8183 */
--#define MT8183_NUM_CONTROLLER         2
--
--/* The calibration coefficient of sensor  */
--#define MT8183_CALIBRATION    153
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT7986_TEMP_AUXADC_CHANNEL    11
--
--/* The total number of temperature sensors in the MT7986 */
--#define MT7986_NUM_SENSORS            1
--
--/* The number of banks in the MT7986 */
--#define MT7986_NUM_ZONES              1
--
--/* The number of sensing points per bank */
--#define MT7986_NUM_SENSORS_PER_ZONE   1
--
--/* MT7986 thermal sensors */
--#define MT7986_TS1                    0
--
--/* The number of controller in the MT7986 */
--#define MT7986_NUM_CONTROLLER         1
--
--/* The calibration coefficient of sensor  */
--#define MT7986_CALIBRATION            165
--
--struct mtk_thermal;
--
--struct thermal_bank_cfg {
--      unsigned int num_sensors;
--      const int *sensors;
--};
--
--struct mtk_thermal_bank {
--      struct mtk_thermal *mt;
--      int id;
--};
--
--struct mtk_thermal_data {
--      s32 num_banks;
--      s32 num_sensors;
--      s32 auxadc_channel;
--      const int *vts_index;
--      const int *sensor_mux_values;
--      const int *msr;
--      const int *adcpnp;
--      const int cali_val;
--      const int num_controller;
--      const int *controller_offset;
--      bool need_switch_bank;
--      struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
--      enum mtk_thermal_version version;
--};
--
--struct mtk_thermal {
--      struct device *dev;
--      void __iomem *thermal_base;
--
--      struct clk *clk_peri_therm;
--      struct clk *clk_auxadc;
--      /* lock: for getting and putting banks */
--      struct mutex lock;
--
--      /* Calibration values */
--      s32 adc_ge;
--      s32 adc_oe;
--      s32 degc_cali;
--      s32 o_slope;
--      s32 o_slope_sign;
--      s32 vts[MAX_NUM_VTS];
--
--      const struct mtk_thermal_data *conf;
--      struct mtk_thermal_bank banks[MAX_NUM_ZONES];
--
--      int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
--};
--
--/* MT8183 thermal sensor data */
--static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
--      MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
--};
--
--static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
--      TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
--};
--
--static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
--      TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
--      TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
--};
--
--static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
--static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
--
--static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
--      VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
--};
--
--/* MT8173 thermal sensor data */
--static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
--      { MT8173_TS2, MT8173_TS3 },
--      { MT8173_TS2, MT8173_TS4 },
--      { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
--      { MT8173_TS2 },
--};
--
--static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
--      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
--};
--
--static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
--      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
--};
--
--static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
--static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
--      VTS1, VTS2, VTS3, VTS4, VTSABB
--};
--
--/* MT2701 thermal sensor data */
--static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
--      MT2701_TS1, MT2701_TS2, MT2701_TSABB
--};
--
--static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
--      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
--};
--
--static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
--      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
--};
--
--static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
--static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
--      VTS1, VTS2, VTS3
--};
--
--/* MT2712 thermal sensor data */
--static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
--      MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
--};
--
--static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
--      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
--};
--
--static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
--      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
--};
--
--static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
--static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
--      VTS1, VTS2, VTS3, VTS4
--};
--
--/* MT7622 thermal sensor data */
--static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
--static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
--static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
--static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
--static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
--static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
--
--/* MT7986 thermal sensor data */
--static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
--static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
--static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
--static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
--static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
--static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
--
--/*
-- * The MT8173 thermal controller has four banks. Each bank can read up to
-- * four temperature sensors simultaneously. The MT8173 has a total of 5
-- * temperature sensors. We use each bank to measure a certain area of the
-- * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
-- * areas, hence is used in different banks.
-- *
-- * The thermal core only gets the maximum temperature of all banks, so
-- * the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data, and this indeed needs the temperatures of the individual banks
-- * for making better decisions.
-- */
--static const struct mtk_thermal_data mt8173_thermal_data = {
--      .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
--      .num_banks = MT8173_NUM_ZONES,
--      .num_sensors = MT8173_NUM_SENSORS,
--      .vts_index = mt8173_vts_index,
--      .cali_val = MT8173_CALIBRATION,
--      .num_controller = MT8173_NUM_CONTROLLER,
--      .controller_offset = mt8173_tc_offset,
--      .need_switch_bank = true,
--      .bank_data = {
--              {
--                      .num_sensors = 2,
--                      .sensors = mt8173_bank_data[0],
--              }, {
--                      .num_sensors = 2,
--                      .sensors = mt8173_bank_data[1],
--              }, {
--                      .num_sensors = 3,
--                      .sensors = mt8173_bank_data[2],
--              }, {
--                      .num_sensors = 1,
--                      .sensors = mt8173_bank_data[3],
--              },
--      },
--      .msr = mt8173_msr,
--      .adcpnp = mt8173_adcpnp,
--      .sensor_mux_values = mt8173_mux_values,
--      .version = MTK_THERMAL_V1,
--};
--
--/*
-- * The MT2701 thermal controller has one bank, which can read up to
-- * three temperature sensors simultaneously. The MT2701 has a total of 3
-- * temperature sensors.
-- *
-- * The thermal core only gets the maximum temperature of this one bank,
-- * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data.
-- */
--static const struct mtk_thermal_data mt2701_thermal_data = {
--      .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
--      .num_banks = 1,
--      .num_sensors = MT2701_NUM_SENSORS,
--      .vts_index = mt2701_vts_index,
--      .cali_val = MT2701_CALIBRATION,
--      .num_controller = MT2701_NUM_CONTROLLER,
--      .controller_offset = mt2701_tc_offset,
--      .need_switch_bank = true,
--      .bank_data = {
--              {
--                      .num_sensors = 3,
--                      .sensors = mt2701_bank_data,
--              },
--      },
--      .msr = mt2701_msr,
--      .adcpnp = mt2701_adcpnp,
--      .sensor_mux_values = mt2701_mux_values,
--      .version = MTK_THERMAL_V1,
--};
--
--/*
-- * The MT2712 thermal controller has one bank, which can read up to
-- * four temperature sensors simultaneously. The MT2712 has a total of 4
-- * temperature sensors.
-- *
-- * The thermal core only gets the maximum temperature of this one bank,
-- * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data.
-- */
--static const struct mtk_thermal_data mt2712_thermal_data = {
--      .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
--      .num_banks = 1,
--      .num_sensors = MT2712_NUM_SENSORS,
--      .vts_index = mt2712_vts_index,
--      .cali_val = MT2712_CALIBRATION,
--      .num_controller = MT2712_NUM_CONTROLLER,
--      .controller_offset = mt2712_tc_offset,
--      .need_switch_bank = true,
--      .bank_data = {
--              {
--                      .num_sensors = 4,
--                      .sensors = mt2712_bank_data,
--              },
--      },
--      .msr = mt2712_msr,
--      .adcpnp = mt2712_adcpnp,
--      .sensor_mux_values = mt2712_mux_values,
--      .version = MTK_THERMAL_V1,
--};
--
--/*
-- * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
-- * access.
-- */
--static const struct mtk_thermal_data mt7622_thermal_data = {
--      .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
--      .num_banks = MT7622_NUM_ZONES,
--      .num_sensors = MT7622_NUM_SENSORS,
--      .vts_index = mt7622_vts_index,
--      .cali_val = MT7622_CALIBRATION,
--      .num_controller = MT7622_NUM_CONTROLLER,
--      .controller_offset = mt7622_tc_offset,
--      .need_switch_bank = true,
--      .bank_data = {
--              {
--                      .num_sensors = 1,
--                      .sensors = mt7622_bank_data,
--              },
--      },
--      .msr = mt7622_msr,
--      .adcpnp = mt7622_adcpnp,
--      .sensor_mux_values = mt7622_mux_values,
--      .version = MTK_THERMAL_V2,
--};
--
--/*
-- * The MT8183 thermal controller has one bank for the current SW framework.
-- * The MT8183 has a total of 6 temperature sensors.
-- * There are two thermal controller to control the six sensor.
-- * The first one bind 2 sensor, and the other bind 4 sensors.
-- * The thermal core only gets the maximum temperature of all sensor, so
-- * the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data, and this indeed needs the temperatures of the individual banks
-- * for making better decisions.
-- */
--static const struct mtk_thermal_data mt8183_thermal_data = {
--      .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
--      .num_banks = MT8183_NUM_ZONES,
--      .num_sensors = MT8183_NUM_SENSORS,
--      .vts_index = mt8183_vts_index,
--      .cali_val = MT8183_CALIBRATION,
--      .num_controller = MT8183_NUM_CONTROLLER,
--      .controller_offset = mt8183_tc_offset,
--      .need_switch_bank = false,
--      .bank_data = {
--              {
--                      .num_sensors = 6,
--                      .sensors = mt8183_bank_data,
--              },
--      },
--
--      .msr = mt8183_msr,
--      .adcpnp = mt8183_adcpnp,
--      .sensor_mux_values = mt8183_mux_values,
--      .version = MTK_THERMAL_V1,
--};
--
--/*
-- * MT7986 uses AUXADC Channel 11 for raw data access.
-- */
--static const struct mtk_thermal_data mt7986_thermal_data = {
--      .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
--      .num_banks = MT7986_NUM_ZONES,
--      .num_sensors = MT7986_NUM_SENSORS,
--      .vts_index = mt7986_vts_index,
--      .cali_val = MT7986_CALIBRATION,
--      .num_controller = MT7986_NUM_CONTROLLER,
--      .controller_offset = mt7986_tc_offset,
--      .need_switch_bank = true,
--      .bank_data = {
--              {
--                      .num_sensors = 1,
--                      .sensors = mt7986_bank_data,
--              },
--      },
--      .msr = mt7986_msr,
--      .adcpnp = mt7986_adcpnp,
--      .sensor_mux_values = mt7986_mux_values,
--      .version = MTK_THERMAL_V3,
--};
--
--/**
-- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-- * @mt:       The thermal controller
-- * @sensno:   sensor number
-- * @raw:      raw ADC value
-- *
-- * This converts the raw ADC value to mcelsius using the SoC specific
-- * calibration constants
-- */
--static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
--{
--      s32 tmp;
--
--      raw &= 0xfff;
--
--      tmp = 203450520 << 3;
--      tmp /= mt->conf->cali_val + mt->o_slope;
--      tmp /= 10000 + mt->adc_ge;
--      tmp *= raw - mt->vts[sensno] - 3350;
--      tmp >>= 3;
--
--      return mt->degc_cali * 500 - tmp;
--}
--
--static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
--{
--      s32 format_1;
--      s32 format_2;
--      s32 g_oe;
--      s32 g_gain;
--      s32 g_x_roomt;
--      s32 tmp;
--
--      if (raw == 0)
--              return 0;
--
--      raw &= 0xfff;
--      g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
--      g_oe = mt->adc_oe - 512;
--      format_1 = mt->vts[VTS2] + 3105 - g_oe;
--      format_2 = (mt->degc_cali * 10) >> 1;
--      g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
--
--      tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
--      tmp = tmp * 10 * 100 / 11;
--
--      if (mt->o_slope_sign == 0)
--              tmp = tmp / (165 - mt->o_slope);
--      else
--              tmp = tmp / (165 + mt->o_slope);
--
--      return (format_2 - tmp) * 100;
--}
--
--static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
--{
--      s32 tmp;
--
--      if (raw == 0)
--              return 0;
--
--      raw &= 0xfff;
--      tmp = 100000 * 15 / 16 * 10000;
--      tmp /= 4096 - 512 + mt->adc_ge;
--      tmp /= 1490;
--      tmp *= raw - mt->vts[sensno] - 2900;
--
--      return mt->degc_cali * 500 - tmp;
--}
--
--/**
-- * mtk_thermal_get_bank - get bank
-- * @bank:     The bank
-- *
-- * The bank registers are banked, we have to select a bank in the
-- * PTPCORESEL register to access it.
-- */
--static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
--{
--      struct mtk_thermal *mt = bank->mt;
--      u32 val;
--
--      if (mt->conf->need_switch_bank) {
--              mutex_lock(&mt->lock);
--
--              val = readl(mt->thermal_base + PTPCORESEL);
--              val &= ~0xf;
--              val |= bank->id;
--              writel(val, mt->thermal_base + PTPCORESEL);
--      }
--}
--
--/**
-- * mtk_thermal_put_bank - release bank
-- * @bank:     The bank
-- *
-- * release a bank previously taken with mtk_thermal_get_bank,
-- */
--static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
--{
--      struct mtk_thermal *mt = bank->mt;
--
--      if (mt->conf->need_switch_bank)
--              mutex_unlock(&mt->lock);
--}
--
--/**
-- * mtk_thermal_bank_temperature - get the temperature of a bank
-- * @bank:     The bank
-- *
-- * The temperature of a bank is considered the maximum temperature of
-- * the sensors associated to the bank.
-- */
--static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
--{
--      struct mtk_thermal *mt = bank->mt;
--      const struct mtk_thermal_data *conf = mt->conf;
--      int i, temp = INT_MIN, max = INT_MIN;
--      u32 raw;
--
--      for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
--              raw = readl(mt->thermal_base + conf->msr[i]);
--
--              temp = mt->raw_to_mcelsius(
--                      mt, conf->bank_data[bank->id].sensors[i], raw);
--
--
--              /*
--               * The first read of a sensor often contains very high bogus
--               * temperature value. Filter these out so that the system does
--               * not immediately shut down.
--               */
--              if (temp > 200000)
--                      temp = 0;
--
--              if (temp > max)
--                      max = temp;
--      }
--
--      return max;
--}
--
--static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
--{
--      struct mtk_thermal *mt = tz->devdata;
--      int i;
--      int tempmax = INT_MIN;
--
--      for (i = 0; i < mt->conf->num_banks; i++) {
--              struct mtk_thermal_bank *bank = &mt->banks[i];
--
--              mtk_thermal_get_bank(bank);
--
--              tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
--
--              mtk_thermal_put_bank(bank);
--      }
--
--      *temperature = tempmax;
--
--      return 0;
--}
--
--static const struct thermal_zone_device_ops mtk_thermal_ops = {
--      .get_temp = mtk_read_temp,
--};
--
--static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
--                                u32 apmixed_phys_base, u32 auxadc_phys_base,
--                                int ctrl_id)
--{
--      struct mtk_thermal_bank *bank = &mt->banks[num];
--      const struct mtk_thermal_data *conf = mt->conf;
--      int i;
--
--      int offset = mt->conf->controller_offset[ctrl_id];
--      void __iomem *controller_base = mt->thermal_base + offset;
--
--      bank->id = num;
--      bank->mt = mt;
--
--      mtk_thermal_get_bank(bank);
--
--      /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
--      writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
--
--      /*
--       * filt interval is 1 * 46.540us = 46.54us,
--       * sen interval is 429 * 46.540us = 19.96ms
--       */
--      writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
--                      TEMP_MONCTL2_SENSOR_INTERVAL(429),
--                      controller_base + TEMP_MONCTL2);
--
--      /* poll is set to 10u */
--      writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
--             controller_base + TEMP_AHBPOLL);
--
--      /* temperature sampling control, 1 sample */
--      writel(0x0, controller_base + TEMP_MSRCTL0);
--
--      /* exceed this polling time, IRQ would be inserted */
--      writel(0xffffffff, controller_base + TEMP_AHBTO);
--
--      /* number of interrupts per event, 1 is enough */
--      writel(0x0, controller_base + TEMP_MONIDET0);
--      writel(0x0, controller_base + TEMP_MONIDET1);
--
--      /*
--       * The MT8173 thermal controller does not have its own ADC. Instead it
--       * uses AHB bus accesses to control the AUXADC. To do this the thermal
--       * controller has to be programmed with the physical addresses of the
--       * AUXADC registers and with the various bit positions in the AUXADC.
--       * Also the thermal controller controls a mux in the APMIXEDSYS register
--       * space.
--       */
--
--      /*
--       * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
--       * automatically by hw
--       */
--      writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
--
--      /* AHB address for auxadc mux selection */
--      writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
--             controller_base + TEMP_ADCMUXADDR);
--
--      if (mt->conf->version == MTK_THERMAL_V1) {
--              /* AHB address for pnp sensor mux selection */
--              writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
--                     controller_base + TEMP_PNPMUXADDR);
--      }
--
--      /* AHB value for auxadc enable */
--      writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
--
--      /* AHB address for auxadc enable (channel 0 immediate mode selected) */
--      writel(auxadc_phys_base + AUXADC_CON1_SET_V,
--             controller_base + TEMP_ADCENADDR);
--
--      /* AHB address for auxadc valid bit */
--      writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
--             controller_base + TEMP_ADCVALIDADDR);
--
--      /* AHB address for auxadc voltage output */
--      writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
--             controller_base + TEMP_ADCVOLTADDR);
--
--      /* read valid & voltage are at the same register */
--      writel(0x0, controller_base + TEMP_RDCTRL);
--
--      /* indicate where the valid bit is */
--      writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
--             controller_base + TEMP_ADCVALIDMASK);
--
--      /* no shift */
--      writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
--
--      /* enable auxadc mux write transaction */
--      writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
--              controller_base + TEMP_ADCWRITECTRL);
--
--      for (i = 0; i < conf->bank_data[num].num_sensors; i++)
--              writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
--                     mt->thermal_base + conf->adcpnp[i]);
--
--      writel((1 << conf->bank_data[num].num_sensors) - 1,
--             controller_base + TEMP_MONCTL0);
--
--      writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
--             TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
--             controller_base + TEMP_ADCWRITECTRL);
--
--      mtk_thermal_put_bank(bank);
--}
--
--static u64 of_get_phys_base(struct device_node *np)
--{
--      u64 size64;
--      const __be32 *regaddr_p;
--
--      regaddr_p = of_get_address(np, 0, &size64, NULL);
--      if (!regaddr_p)
--              return OF_BAD_ADDR;
--
--      return of_translate_address(np, regaddr_p);
--}
--
--static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
--{
--      int i;
--
--      if (!(buf[0] & CALIB_BUF0_VALID_V1))
--              return -EINVAL;
--
--      mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
--
--      for (i = 0; i < mt->conf->num_sensors; i++) {
--              switch (mt->conf->vts_index[i]) {
--              case VTS1:
--                      mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
--                      break;
--              case VTS2:
--                      mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
--                      break;
--              case VTS3:
--                      mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
--                      break;
--              case VTS4:
--                      mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
--                      break;
--              case VTS5:
--                      mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
--                      break;
--              case VTSABB:
--                      mt->vts[VTSABB] =
--                              CALIB_BUF2_VTS_TSABB_V1(buf[2]);
--                      break;
--              default:
--                      break;
--              }
--      }
--
--      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
--      if (CALIB_BUF1_ID_V1(buf[1]) &
--          CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
--              mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
--      else
--              mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
--
--      return 0;
--}
--
--static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
--{
--      if (!CALIB_BUF1_VALID_V2(buf[1]))
--              return -EINVAL;
--
--      mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
--      mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
--      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
--      mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
--      mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
--      mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
--      mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
--      mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
--
--      return 0;
--}
--
--static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
--{
--      if (!CALIB_BUF1_VALID_V3(buf[1]))
--              return -EINVAL;
--
--      mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
--      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
--      mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
--      mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
--      mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
--      mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
--      mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
--
--      if (CALIB_BUF1_ID_V3(buf[1]) == 0)
--              mt->o_slope = 0;
--
--      return 0;
--}
--
--static int mtk_thermal_get_calibration_data(struct device *dev,
--                                          struct mtk_thermal *mt)
--{
--      struct nvmem_cell *cell;
--      u32 *buf;
--      size_t len;
--      int i, ret = 0;
--
--      /* Start with default values */
--      mt->adc_ge = 512;
--      mt->adc_oe = 512;
--      for (i = 0; i < mt->conf->num_sensors; i++)
--              mt->vts[i] = 260;
--      mt->degc_cali = 40;
--      mt->o_slope = 0;
--
--      cell = nvmem_cell_get(dev, "calibration-data");
--      if (IS_ERR(cell)) {
--              if (PTR_ERR(cell) == -EPROBE_DEFER)
--                      return PTR_ERR(cell);
--              return 0;
--      }
--
--      buf = (u32 *)nvmem_cell_read(cell, &len);
--
--      nvmem_cell_put(cell);
--
--      if (IS_ERR(buf))
--              return PTR_ERR(buf);
--
--      if (len < 3 * sizeof(u32)) {
--              dev_warn(dev, "invalid calibration data\n");
--              ret = -EINVAL;
--              goto out;
--      }
--
--      switch (mt->conf->version) {
--      case MTK_THERMAL_V1:
--              ret = mtk_thermal_extract_efuse_v1(mt, buf);
--              break;
--      case MTK_THERMAL_V2:
--              ret = mtk_thermal_extract_efuse_v2(mt, buf);
--              break;
--      case MTK_THERMAL_V3:
--              ret = mtk_thermal_extract_efuse_v3(mt, buf);
--              break;
--      default:
--              ret = -EINVAL;
--              break;
--      }
--
--      if (ret) {
--              dev_info(dev, "Device not calibrated, using default calibration values\n");
--              ret = 0;
--      }
--
--out:
--      kfree(buf);
--
--      return ret;
--}
--
--static const struct of_device_id mtk_thermal_of_match[] = {
--      {
--              .compatible = "mediatek,mt8173-thermal",
--              .data = (void *)&mt8173_thermal_data,
--      },
--      {
--              .compatible = "mediatek,mt2701-thermal",
--              .data = (void *)&mt2701_thermal_data,
--      },
--      {
--              .compatible = "mediatek,mt2712-thermal",
--              .data = (void *)&mt2712_thermal_data,
--      },
--      {
--              .compatible = "mediatek,mt7622-thermal",
--              .data = (void *)&mt7622_thermal_data,
--      },
--      {
--              .compatible = "mediatek,mt7986-thermal",
--              .data = (void *)&mt7986_thermal_data,
--      },
--      {
--              .compatible = "mediatek,mt8183-thermal",
--              .data = (void *)&mt8183_thermal_data,
--      }, {
--      },
--};
--MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
--
--static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
--{
--      int tmp;
--
--      tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
--      tmp &= ~(0x37);
--      tmp |= 0x1;
--      writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
--      udelay(200);
--}
--
--static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
--                                          void __iomem *auxadc_base)
--{
--      int tmp;
--
--      writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
--      writel(0x1, mt->thermal_base + TEMP_MONCTL0);
--      tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
--      writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
--}
--
--static int mtk_thermal_probe(struct platform_device *pdev)
--{
--      int ret, i, ctrl_id;
--      struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
--      struct mtk_thermal *mt;
--      u64 auxadc_phys_base, apmixed_phys_base;
--      struct thermal_zone_device *tzdev;
--      void __iomem *apmixed_base, *auxadc_base;
--
--      mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
--      if (!mt)
--              return -ENOMEM;
--
--      mt->conf = of_device_get_match_data(&pdev->dev);
--
--      mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
--      if (IS_ERR(mt->clk_peri_therm))
--              return PTR_ERR(mt->clk_peri_therm);
--
--      mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
--      if (IS_ERR(mt->clk_auxadc))
--              return PTR_ERR(mt->clk_auxadc);
--
--      mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
--      if (IS_ERR(mt->thermal_base))
--              return PTR_ERR(mt->thermal_base);
--
--      ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
--      if (ret)
--              return ret;
--
--      mutex_init(&mt->lock);
--
--      mt->dev = &pdev->dev;
--
--      auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
--      if (!auxadc) {
--              dev_err(&pdev->dev, "missing auxadc node\n");
--              return -ENODEV;
--      }
--
--      auxadc_base = of_iomap(auxadc, 0);
--      auxadc_phys_base = of_get_phys_base(auxadc);
--
--      of_node_put(auxadc);
--
--      if (auxadc_phys_base == OF_BAD_ADDR) {
--              dev_err(&pdev->dev, "Can't get auxadc phys address\n");
--              return -EINVAL;
--      }
--
--      apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
--      if (!apmixedsys) {
--              dev_err(&pdev->dev, "missing apmixedsys node\n");
--              return -ENODEV;
--      }
--
--      apmixed_base = of_iomap(apmixedsys, 0);
--      apmixed_phys_base = of_get_phys_base(apmixedsys);
--
--      of_node_put(apmixedsys);
--
--      if (apmixed_phys_base == OF_BAD_ADDR) {
--              dev_err(&pdev->dev, "Can't get auxadc phys address\n");
--              return -EINVAL;
--      }
--
--      ret = device_reset_optional(&pdev->dev);
--      if (ret)
--              return ret;
--
--      ret = clk_prepare_enable(mt->clk_auxadc);
--      if (ret) {
--              dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
--              return ret;
--      }
--
--      ret = clk_prepare_enable(mt->clk_peri_therm);
--      if (ret) {
--              dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
--              goto err_disable_clk_auxadc;
--      }
--
--      if (mt->conf->version != MTK_THERMAL_V1) {
--              mtk_thermal_turn_on_buffer(apmixed_base);
--              mtk_thermal_release_periodic_ts(mt, auxadc_base);
--      }
--
--      if (mt->conf->version == MTK_THERMAL_V1)
--              mt->raw_to_mcelsius = raw_to_mcelsius_v1;
--      else if (mt->conf->version == MTK_THERMAL_V2)
--              mt->raw_to_mcelsius = raw_to_mcelsius_v2;
--      else
--              mt->raw_to_mcelsius = raw_to_mcelsius_v3;
--
--      for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
--              for (i = 0; i < mt->conf->num_banks; i++)
--                      mtk_thermal_init_bank(mt, i, apmixed_phys_base,
--                                            auxadc_phys_base, ctrl_id);
--
--      platform_set_drvdata(pdev, mt);
--
--      tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
--                                            &mtk_thermal_ops);
--      if (IS_ERR(tzdev)) {
--              ret = PTR_ERR(tzdev);
--              goto err_disable_clk_peri_therm;
--      }
--
--      ret = devm_thermal_add_hwmon_sysfs(tzdev);
--      if (ret)
--              dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
--
--      return 0;
--
--err_disable_clk_peri_therm:
--      clk_disable_unprepare(mt->clk_peri_therm);
--err_disable_clk_auxadc:
--      clk_disable_unprepare(mt->clk_auxadc);
--
--      return ret;
--}
--
--static int mtk_thermal_remove(struct platform_device *pdev)
--{
--      struct mtk_thermal *mt = platform_get_drvdata(pdev);
--
--      clk_disable_unprepare(mt->clk_peri_therm);
--      clk_disable_unprepare(mt->clk_auxadc);
--
--      return 0;
--}
--
--static struct platform_driver mtk_thermal_driver = {
--      .probe = mtk_thermal_probe,
--      .remove = mtk_thermal_remove,
--      .driver = {
--              .name = "mtk-thermal",
--              .of_match_table = mtk_thermal_of_match,
--      },
--};
--
--module_platform_driver(mtk_thermal_driver);
--
--MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
--MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
--MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
--MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
--MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
--MODULE_DESCRIPTION("Mediatek thermal driver");
--MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -0,0 +1,1254 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2015 MediaTek Inc.
-+ * Author: Hanyi Wu <hanyi.wu@mediatek.com>
-+ *         Sascha Hauer <s.hauer@pengutronix.de>
-+ *         Dawei Chien <dawei.chien@mediatek.com>
-+ *         Louis Yu <louis.yu@mediatek.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/thermal.h>
-+#include <linux/reset.h>
-+#include <linux/types.h>
-+
-+#include "../thermal_hwmon.h"
-+
-+/* AUXADC Registers */
-+#define AUXADC_CON1_SET_V     0x008
-+#define AUXADC_CON1_CLR_V     0x00c
-+#define AUXADC_CON2_V         0x010
-+#define AUXADC_DATA(channel)  (0x14 + (channel) * 4)
-+
-+#define APMIXED_SYS_TS_CON1   0x604
-+
-+/* Thermal Controller Registers */
-+#define TEMP_MONCTL0          0x000
-+#define TEMP_MONCTL1          0x004
-+#define TEMP_MONCTL2          0x008
-+#define TEMP_MONIDET0         0x014
-+#define TEMP_MONIDET1         0x018
-+#define TEMP_MSRCTL0          0x038
-+#define TEMP_MSRCTL1          0x03c
-+#define TEMP_AHBPOLL          0x040
-+#define TEMP_AHBTO            0x044
-+#define TEMP_ADCPNP0          0x048
-+#define TEMP_ADCPNP1          0x04c
-+#define TEMP_ADCPNP2          0x050
-+#define TEMP_ADCPNP3          0x0b4
-+
-+#define TEMP_ADCMUX           0x054
-+#define TEMP_ADCEN            0x060
-+#define TEMP_PNPMUXADDR               0x064
-+#define TEMP_ADCMUXADDR               0x068
-+#define TEMP_ADCENADDR                0x074
-+#define TEMP_ADCVALIDADDR     0x078
-+#define TEMP_ADCVOLTADDR      0x07c
-+#define TEMP_RDCTRL           0x080
-+#define TEMP_ADCVALIDMASK     0x084
-+#define TEMP_ADCVOLTAGESHIFT  0x088
-+#define TEMP_ADCWRITECTRL     0x08c
-+#define TEMP_MSR0             0x090
-+#define TEMP_MSR1             0x094
-+#define TEMP_MSR2             0x098
-+#define TEMP_MSR3             0x0B8
-+
-+#define TEMP_SPARE0           0x0f0
-+
-+#define TEMP_ADCPNP0_1          0x148
-+#define TEMP_ADCPNP1_1          0x14c
-+#define TEMP_ADCPNP2_1          0x150
-+#define TEMP_MSR0_1             0x190
-+#define TEMP_MSR1_1             0x194
-+#define TEMP_MSR2_1             0x198
-+#define TEMP_ADCPNP3_1          0x1b4
-+#define TEMP_MSR3_1             0x1B8
-+
-+#define PTPCORESEL            0x400
-+
-+#define TEMP_MONCTL1_PERIOD_UNIT(x)   ((x) & 0x3ff)
-+
-+#define TEMP_MONCTL2_FILTER_INTERVAL(x)       (((x) & 0x3ff) << 16)
-+#define TEMP_MONCTL2_SENSOR_INTERVAL(x)       ((x) & 0x3ff)
-+
-+#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)     (x)
-+
-+#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE               BIT(0)
-+#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE               BIT(1)
-+
-+#define TEMP_ADCVALIDMASK_VALID_HIGH          BIT(5)
-+#define TEMP_ADCVALIDMASK_VALID_POS(bit)      (bit)
-+
-+/* MT8173 thermal sensors */
-+#define MT8173_TS1    0
-+#define MT8173_TS2    1
-+#define MT8173_TS3    2
-+#define MT8173_TS4    3
-+#define MT8173_TSABB  4
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT8173_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT8173 */
-+#define MT8173_NUM_SENSORS            5
-+
-+/* The number of banks in the MT8173 */
-+#define MT8173_NUM_ZONES              4
-+
-+/* The number of sensing points per bank */
-+#define MT8173_NUM_SENSORS_PER_ZONE   4
-+
-+/* The number of controller in the MT8173 */
-+#define MT8173_NUM_CONTROLLER         1
-+
-+/* The calibration coefficient of sensor  */
-+#define MT8173_CALIBRATION    165
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-+ * MT8183 has 6 sensors and needs 6 VTS calibration data.
-+ * MT8173 has 5 sensors and needs 5 VTS calibration data.
-+ * MT2701 has 3 sensors and needs 3 VTS calibration data.
-+ * MT2712 has 4 sensors and needs 4 VTS calibration data.
-+ */
-+#define CALIB_BUF0_VALID_V1           BIT(0)
-+#define CALIB_BUF1_ADC_GE_V1(x)               (((x) >> 22) & 0x3ff)
-+#define CALIB_BUF0_VTS_TS1_V1(x)      (((x) >> 17) & 0x1ff)
-+#define CALIB_BUF0_VTS_TS2_V1(x)      (((x) >> 8) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS3_V1(x)      (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF2_VTS_TS4_V1(x)      (((x) >> 23) & 0x1ff)
-+#define CALIB_BUF2_VTS_TS5_V1(x)      (((x) >> 5) & 0x1ff)
-+#define CALIB_BUF2_VTS_TSABB_V1(x)    (((x) >> 14) & 0x1ff)
-+#define CALIB_BUF0_DEGC_CALI_V1(x)    (((x) >> 1) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V1(x)      (((x) >> 26) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
-+#define CALIB_BUF1_ID_V1(x)           (((x) >> 9) & 0x1)
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros could be used for MT7622.
-+ */
-+#define CALIB_BUF0_ADC_OE_V2(x)               (((x) >> 22) & 0x3ff)
-+#define CALIB_BUF0_ADC_GE_V2(x)               (((x) >> 12) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V2(x)    (((x) >> 6) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V2(x)      (((x) >> 0) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V2(x)      (((x) >> 23) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V2(x)      (((x) >> 14) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V2(x)    (((x) >> 5) & 0x1ff)
-+#define CALIB_BUF1_VALID_V2(x)                (((x) >> 4) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros can be used for MT7981 and MT7986.
-+ */
-+#define CALIB_BUF0_ADC_GE_V3(x)               (((x) >> 0) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V3(x)    (((x) >> 20) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V3(x)      (((x) >> 26) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V3(x)      (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V3(x)      (((x) >> 21) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V3(x)    (((x) >> 9) & 0x1ff)
-+#define CALIB_BUF1_VALID_V3(x)                (((x) >> 18) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
-+#define CALIB_BUF1_ID_V3(x)           (((x) >> 20) & 0x1)
-+
-+enum {
-+      VTS1,
-+      VTS2,
-+      VTS3,
-+      VTS4,
-+      VTS5,
-+      VTSABB,
-+      MAX_NUM_VTS,
-+};
-+
-+enum mtk_thermal_version {
-+      MTK_THERMAL_V1 = 1,
-+      MTK_THERMAL_V2,
-+      MTK_THERMAL_V3,
-+};
-+
-+/* MT2701 thermal sensors */
-+#define MT2701_TS1    0
-+#define MT2701_TS2    1
-+#define MT2701_TSABB  2
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT2701_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT2701 */
-+#define MT2701_NUM_SENSORS    3
-+
-+/* The number of sensing points per bank */
-+#define MT2701_NUM_SENSORS_PER_ZONE   3
-+
-+/* The number of controller in the MT2701 */
-+#define MT2701_NUM_CONTROLLER         1
-+
-+/* The calibration coefficient of sensor  */
-+#define MT2701_CALIBRATION    165
-+
-+/* MT2712 thermal sensors */
-+#define MT2712_TS1    0
-+#define MT2712_TS2    1
-+#define MT2712_TS3    2
-+#define MT2712_TS4    3
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT2712_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT2712 */
-+#define MT2712_NUM_SENSORS    4
-+
-+/* The number of sensing points per bank */
-+#define MT2712_NUM_SENSORS_PER_ZONE   4
-+
-+/* The number of controller in the MT2712 */
-+#define MT2712_NUM_CONTROLLER         1
-+
-+/* The calibration coefficient of sensor  */
-+#define MT2712_CALIBRATION    165
-+
-+#define MT7622_TEMP_AUXADC_CHANNEL    11
-+#define MT7622_NUM_SENSORS            1
-+#define MT7622_NUM_ZONES              1
-+#define MT7622_NUM_SENSORS_PER_ZONE   1
-+#define MT7622_TS1    0
-+#define MT7622_NUM_CONTROLLER         1
-+
-+/* The maximum number of banks */
-+#define MAX_NUM_ZONES         8
-+
-+/* The calibration coefficient of sensor  */
-+#define MT7622_CALIBRATION    165
-+
-+/* MT8183 thermal sensors */
-+#define MT8183_TS1    0
-+#define MT8183_TS2    1
-+#define MT8183_TS3    2
-+#define MT8183_TS4    3
-+#define MT8183_TS5    4
-+#define MT8183_TSABB  5
-+
-+/* AUXADC channel  is used for the temperature sensors */
-+#define MT8183_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT8183 */
-+#define MT8183_NUM_SENSORS    6
-+
-+/* The number of banks in the MT8183 */
-+#define MT8183_NUM_ZONES               1
-+
-+/* The number of sensing points per bank */
-+#define MT8183_NUM_SENSORS_PER_ZONE    6
-+
-+/* The number of controller in the MT8183 */
-+#define MT8183_NUM_CONTROLLER         2
-+
-+/* The calibration coefficient of sensor  */
-+#define MT8183_CALIBRATION    153
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT7986_TEMP_AUXADC_CHANNEL    11
-+
-+/* The total number of temperature sensors in the MT7986 */
-+#define MT7986_NUM_SENSORS            1
-+
-+/* The number of banks in the MT7986 */
-+#define MT7986_NUM_ZONES              1
-+
-+/* The number of sensing points per bank */
-+#define MT7986_NUM_SENSORS_PER_ZONE   1
-+
-+/* MT7986 thermal sensors */
-+#define MT7986_TS1                    0
-+
-+/* The number of controller in the MT7986 */
-+#define MT7986_NUM_CONTROLLER         1
-+
-+/* The calibration coefficient of sensor  */
-+#define MT7986_CALIBRATION            165
-+
-+struct mtk_thermal;
-+
-+struct thermal_bank_cfg {
-+      unsigned int num_sensors;
-+      const int *sensors;
-+};
-+
-+struct mtk_thermal_bank {
-+      struct mtk_thermal *mt;
-+      int id;
-+};
-+
-+struct mtk_thermal_data {
-+      s32 num_banks;
-+      s32 num_sensors;
-+      s32 auxadc_channel;
-+      const int *vts_index;
-+      const int *sensor_mux_values;
-+      const int *msr;
-+      const int *adcpnp;
-+      const int cali_val;
-+      const int num_controller;
-+      const int *controller_offset;
-+      bool need_switch_bank;
-+      struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
-+      enum mtk_thermal_version version;
-+};
-+
-+struct mtk_thermal {
-+      struct device *dev;
-+      void __iomem *thermal_base;
-+
-+      struct clk *clk_peri_therm;
-+      struct clk *clk_auxadc;
-+      /* lock: for getting and putting banks */
-+      struct mutex lock;
-+
-+      /* Calibration values */
-+      s32 adc_ge;
-+      s32 adc_oe;
-+      s32 degc_cali;
-+      s32 o_slope;
-+      s32 o_slope_sign;
-+      s32 vts[MAX_NUM_VTS];
-+
-+      const struct mtk_thermal_data *conf;
-+      struct mtk_thermal_bank banks[MAX_NUM_ZONES];
-+
-+      int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
-+};
-+
-+/* MT8183 thermal sensor data */
-+static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
-+      MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
-+};
-+
-+static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
-+};
-+
-+static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
-+      TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
-+};
-+
-+static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
-+static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
-+
-+static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
-+      VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
-+};
-+
-+/* MT8173 thermal sensor data */
-+static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
-+      { MT8173_TS2, MT8173_TS3 },
-+      { MT8173_TS2, MT8173_TS4 },
-+      { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
-+      { MT8173_TS2 },
-+};
-+
-+static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
-+};
-+
-+static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
-+};
-+
-+static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
-+static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
-+      VTS1, VTS2, VTS3, VTS4, VTSABB
-+};
-+
-+/* MT2701 thermal sensor data */
-+static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
-+      MT2701_TS1, MT2701_TS2, MT2701_TSABB
-+};
-+
-+static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
-+};
-+
-+static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
-+};
-+
-+static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
-+static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
-+      VTS1, VTS2, VTS3
-+};
-+
-+/* MT2712 thermal sensor data */
-+static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
-+      MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
-+};
-+
-+static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
-+};
-+
-+static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
-+};
-+
-+static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
-+static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
-+      VTS1, VTS2, VTS3, VTS4
-+};
-+
-+/* MT7622 thermal sensor data */
-+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
-+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
-+static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
-+static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
-+
-+/* MT7986 thermal sensor data */
-+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
-+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
-+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
-+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-+
-+/*
-+ * The MT8173 thermal controller has four banks. Each bank can read up to
-+ * four temperature sensors simultaneously. The MT8173 has a total of 5
-+ * temperature sensors. We use each bank to measure a certain area of the
-+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
-+ * areas, hence is used in different banks.
-+ *
-+ * The thermal core only gets the maximum temperature of all banks, so
-+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data, and this indeed needs the temperatures of the individual banks
-+ * for making better decisions.
-+ */
-+static const struct mtk_thermal_data mt8173_thermal_data = {
-+      .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT8173_NUM_ZONES,
-+      .num_sensors = MT8173_NUM_SENSORS,
-+      .vts_index = mt8173_vts_index,
-+      .cali_val = MT8173_CALIBRATION,
-+      .num_controller = MT8173_NUM_CONTROLLER,
-+      .controller_offset = mt8173_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 2,
-+                      .sensors = mt8173_bank_data[0],
-+              }, {
-+                      .num_sensors = 2,
-+                      .sensors = mt8173_bank_data[1],
-+              }, {
-+                      .num_sensors = 3,
-+                      .sensors = mt8173_bank_data[2],
-+              }, {
-+                      .num_sensors = 1,
-+                      .sensors = mt8173_bank_data[3],
-+              },
-+      },
-+      .msr = mt8173_msr,
-+      .adcpnp = mt8173_adcpnp,
-+      .sensor_mux_values = mt8173_mux_values,
-+      .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * The MT2701 thermal controller has one bank, which can read up to
-+ * three temperature sensors simultaneously. The MT2701 has a total of 3
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt2701_thermal_data = {
-+      .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
-+      .num_banks = 1,
-+      .num_sensors = MT2701_NUM_SENSORS,
-+      .vts_index = mt2701_vts_index,
-+      .cali_val = MT2701_CALIBRATION,
-+      .num_controller = MT2701_NUM_CONTROLLER,
-+      .controller_offset = mt2701_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 3,
-+                      .sensors = mt2701_bank_data,
-+              },
-+      },
-+      .msr = mt2701_msr,
-+      .adcpnp = mt2701_adcpnp,
-+      .sensor_mux_values = mt2701_mux_values,
-+      .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * The MT2712 thermal controller has one bank, which can read up to
-+ * four temperature sensors simultaneously. The MT2712 has a total of 4
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt2712_thermal_data = {
-+      .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
-+      .num_banks = 1,
-+      .num_sensors = MT2712_NUM_SENSORS,
-+      .vts_index = mt2712_vts_index,
-+      .cali_val = MT2712_CALIBRATION,
-+      .num_controller = MT2712_NUM_CONTROLLER,
-+      .controller_offset = mt2712_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 4,
-+                      .sensors = mt2712_bank_data,
-+              },
-+      },
-+      .msr = mt2712_msr,
-+      .adcpnp = mt2712_adcpnp,
-+      .sensor_mux_values = mt2712_mux_values,
-+      .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
-+ * access.
-+ */
-+static const struct mtk_thermal_data mt7622_thermal_data = {
-+      .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT7622_NUM_ZONES,
-+      .num_sensors = MT7622_NUM_SENSORS,
-+      .vts_index = mt7622_vts_index,
-+      .cali_val = MT7622_CALIBRATION,
-+      .num_controller = MT7622_NUM_CONTROLLER,
-+      .controller_offset = mt7622_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 1,
-+                      .sensors = mt7622_bank_data,
-+              },
-+      },
-+      .msr = mt7622_msr,
-+      .adcpnp = mt7622_adcpnp,
-+      .sensor_mux_values = mt7622_mux_values,
-+      .version = MTK_THERMAL_V2,
-+};
-+
-+/*
-+ * The MT8183 thermal controller has one bank for the current SW framework.
-+ * The MT8183 has a total of 6 temperature sensors.
-+ * There are two thermal controller to control the six sensor.
-+ * The first one bind 2 sensor, and the other bind 4 sensors.
-+ * The thermal core only gets the maximum temperature of all sensor, so
-+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data, and this indeed needs the temperatures of the individual banks
-+ * for making better decisions.
-+ */
-+static const struct mtk_thermal_data mt8183_thermal_data = {
-+      .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT8183_NUM_ZONES,
-+      .num_sensors = MT8183_NUM_SENSORS,
-+      .vts_index = mt8183_vts_index,
-+      .cali_val = MT8183_CALIBRATION,
-+      .num_controller = MT8183_NUM_CONTROLLER,
-+      .controller_offset = mt8183_tc_offset,
-+      .need_switch_bank = false,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 6,
-+                      .sensors = mt8183_bank_data,
-+              },
-+      },
-+
-+      .msr = mt8183_msr,
-+      .adcpnp = mt8183_adcpnp,
-+      .sensor_mux_values = mt8183_mux_values,
-+      .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * MT7986 uses AUXADC Channel 11 for raw data access.
-+ */
-+static const struct mtk_thermal_data mt7986_thermal_data = {
-+      .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT7986_NUM_ZONES,
-+      .num_sensors = MT7986_NUM_SENSORS,
-+      .vts_index = mt7986_vts_index,
-+      .cali_val = MT7986_CALIBRATION,
-+      .num_controller = MT7986_NUM_CONTROLLER,
-+      .controller_offset = mt7986_tc_offset,
-+      .need_switch_bank = true,
-+      .bank_data = {
-+              {
-+                      .num_sensors = 1,
-+                      .sensors = mt7986_bank_data,
-+              },
-+      },
-+      .msr = mt7986_msr,
-+      .adcpnp = mt7986_adcpnp,
-+      .sensor_mux_values = mt7986_mux_values,
-+      .version = MTK_THERMAL_V3,
-+};
-+
-+/**
-+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-+ * @mt:       The thermal controller
-+ * @sensno:   sensor number
-+ * @raw:      raw ADC value
-+ *
-+ * This converts the raw ADC value to mcelsius using the SoC specific
-+ * calibration constants
-+ */
-+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+      s32 tmp;
-+
-+      raw &= 0xfff;
-+
-+      tmp = 203450520 << 3;
-+      tmp /= mt->conf->cali_val + mt->o_slope;
-+      tmp /= 10000 + mt->adc_ge;
-+      tmp *= raw - mt->vts[sensno] - 3350;
-+      tmp >>= 3;
-+
-+      return mt->degc_cali * 500 - tmp;
-+}
-+
-+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+      s32 format_1;
-+      s32 format_2;
-+      s32 g_oe;
-+      s32 g_gain;
-+      s32 g_x_roomt;
-+      s32 tmp;
-+
-+      if (raw == 0)
-+              return 0;
-+
-+      raw &= 0xfff;
-+      g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
-+      g_oe = mt->adc_oe - 512;
-+      format_1 = mt->vts[VTS2] + 3105 - g_oe;
-+      format_2 = (mt->degc_cali * 10) >> 1;
-+      g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
-+
-+      tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
-+      tmp = tmp * 10 * 100 / 11;
-+
-+      if (mt->o_slope_sign == 0)
-+              tmp = tmp / (165 - mt->o_slope);
-+      else
-+              tmp = tmp / (165 + mt->o_slope);
-+
-+      return (format_2 - tmp) * 100;
-+}
-+
-+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+      s32 tmp;
-+
-+      if (raw == 0)
-+              return 0;
-+
-+      raw &= 0xfff;
-+      tmp = 100000 * 15 / 16 * 10000;
-+      tmp /= 4096 - 512 + mt->adc_ge;
-+      tmp /= 1490;
-+      tmp *= raw - mt->vts[sensno] - 2900;
-+
-+      return mt->degc_cali * 500 - tmp;
-+}
-+
-+/**
-+ * mtk_thermal_get_bank - get bank
-+ * @bank:     The bank
-+ *
-+ * The bank registers are banked, we have to select a bank in the
-+ * PTPCORESEL register to access it.
-+ */
-+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
-+{
-+      struct mtk_thermal *mt = bank->mt;
-+      u32 val;
-+
-+      if (mt->conf->need_switch_bank) {
-+              mutex_lock(&mt->lock);
-+
-+              val = readl(mt->thermal_base + PTPCORESEL);
-+              val &= ~0xf;
-+              val |= bank->id;
-+              writel(val, mt->thermal_base + PTPCORESEL);
-+      }
-+}
-+
-+/**
-+ * mtk_thermal_put_bank - release bank
-+ * @bank:     The bank
-+ *
-+ * release a bank previously taken with mtk_thermal_get_bank,
-+ */
-+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
-+{
-+      struct mtk_thermal *mt = bank->mt;
-+
-+      if (mt->conf->need_switch_bank)
-+              mutex_unlock(&mt->lock);
-+}
-+
-+/**
-+ * mtk_thermal_bank_temperature - get the temperature of a bank
-+ * @bank:     The bank
-+ *
-+ * The temperature of a bank is considered the maximum temperature of
-+ * the sensors associated to the bank.
-+ */
-+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
-+{
-+      struct mtk_thermal *mt = bank->mt;
-+      const struct mtk_thermal_data *conf = mt->conf;
-+      int i, temp = INT_MIN, max = INT_MIN;
-+      u32 raw;
-+
-+      for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-+              raw = readl(mt->thermal_base + conf->msr[i]);
-+
-+              temp = mt->raw_to_mcelsius(
-+                      mt, conf->bank_data[bank->id].sensors[i], raw);
-+
-+
-+              /*
-+               * The first read of a sensor often contains very high bogus
-+               * temperature value. Filter these out so that the system does
-+               * not immediately shut down.
-+               */
-+              if (temp > 200000)
-+                      temp = 0;
-+
-+              if (temp > max)
-+                      max = temp;
-+      }
-+
-+      return max;
-+}
-+
-+static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
-+{
-+      struct mtk_thermal *mt = tz->devdata;
-+      int i;
-+      int tempmax = INT_MIN;
-+
-+      for (i = 0; i < mt->conf->num_banks; i++) {
-+              struct mtk_thermal_bank *bank = &mt->banks[i];
-+
-+              mtk_thermal_get_bank(bank);
-+
-+              tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
-+
-+              mtk_thermal_put_bank(bank);
-+      }
-+
-+      *temperature = tempmax;
-+
-+      return 0;
-+}
-+
-+static const struct thermal_zone_device_ops mtk_thermal_ops = {
-+      .get_temp = mtk_read_temp,
-+};
-+
-+static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
-+                                u32 apmixed_phys_base, u32 auxadc_phys_base,
-+                                int ctrl_id)
-+{
-+      struct mtk_thermal_bank *bank = &mt->banks[num];
-+      const struct mtk_thermal_data *conf = mt->conf;
-+      int i;
-+
-+      int offset = mt->conf->controller_offset[ctrl_id];
-+      void __iomem *controller_base = mt->thermal_base + offset;
-+
-+      bank->id = num;
-+      bank->mt = mt;
-+
-+      mtk_thermal_get_bank(bank);
-+
-+      /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
-+      writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
-+
-+      /*
-+       * filt interval is 1 * 46.540us = 46.54us,
-+       * sen interval is 429 * 46.540us = 19.96ms
-+       */
-+      writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
-+                      TEMP_MONCTL2_SENSOR_INTERVAL(429),
-+                      controller_base + TEMP_MONCTL2);
-+
-+      /* poll is set to 10u */
-+      writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
-+             controller_base + TEMP_AHBPOLL);
-+
-+      /* temperature sampling control, 1 sample */
-+      writel(0x0, controller_base + TEMP_MSRCTL0);
-+
-+      /* exceed this polling time, IRQ would be inserted */
-+      writel(0xffffffff, controller_base + TEMP_AHBTO);
-+
-+      /* number of interrupts per event, 1 is enough */
-+      writel(0x0, controller_base + TEMP_MONIDET0);
-+      writel(0x0, controller_base + TEMP_MONIDET1);
-+
-+      /*
-+       * The MT8173 thermal controller does not have its own ADC. Instead it
-+       * uses AHB bus accesses to control the AUXADC. To do this the thermal
-+       * controller has to be programmed with the physical addresses of the
-+       * AUXADC registers and with the various bit positions in the AUXADC.
-+       * Also the thermal controller controls a mux in the APMIXEDSYS register
-+       * space.
-+       */
-+
-+      /*
-+       * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
-+       * automatically by hw
-+       */
-+      writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
-+
-+      /* AHB address for auxadc mux selection */
-+      writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
-+             controller_base + TEMP_ADCMUXADDR);
-+
-+      if (mt->conf->version == MTK_THERMAL_V1) {
-+              /* AHB address for pnp sensor mux selection */
-+              writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-+                     controller_base + TEMP_PNPMUXADDR);
-+      }
-+
-+      /* AHB value for auxadc enable */
-+      writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
-+
-+      /* AHB address for auxadc enable (channel 0 immediate mode selected) */
-+      writel(auxadc_phys_base + AUXADC_CON1_SET_V,
-+             controller_base + TEMP_ADCENADDR);
-+
-+      /* AHB address for auxadc valid bit */
-+      writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-+             controller_base + TEMP_ADCVALIDADDR);
-+
-+      /* AHB address for auxadc voltage output */
-+      writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-+             controller_base + TEMP_ADCVOLTADDR);
-+
-+      /* read valid & voltage are at the same register */
-+      writel(0x0, controller_base + TEMP_RDCTRL);
-+
-+      /* indicate where the valid bit is */
-+      writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
-+             controller_base + TEMP_ADCVALIDMASK);
-+
-+      /* no shift */
-+      writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
-+
-+      /* enable auxadc mux write transaction */
-+      writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-+              controller_base + TEMP_ADCWRITECTRL);
-+
-+      for (i = 0; i < conf->bank_data[num].num_sensors; i++)
-+              writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-+                     mt->thermal_base + conf->adcpnp[i]);
-+
-+      writel((1 << conf->bank_data[num].num_sensors) - 1,
-+             controller_base + TEMP_MONCTL0);
-+
-+      writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
-+             TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-+             controller_base + TEMP_ADCWRITECTRL);
-+
-+      mtk_thermal_put_bank(bank);
-+}
-+
-+static u64 of_get_phys_base(struct device_node *np)
-+{
-+      u64 size64;
-+      const __be32 *regaddr_p;
-+
-+      regaddr_p = of_get_address(np, 0, &size64, NULL);
-+      if (!regaddr_p)
-+              return OF_BAD_ADDR;
-+
-+      return of_translate_address(np, regaddr_p);
-+}
-+
-+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
-+{
-+      int i;
-+
-+      if (!(buf[0] & CALIB_BUF0_VALID_V1))
-+              return -EINVAL;
-+
-+      mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
-+
-+      for (i = 0; i < mt->conf->num_sensors; i++) {
-+              switch (mt->conf->vts_index[i]) {
-+              case VTS1:
-+                      mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
-+                      break;
-+              case VTS2:
-+                      mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
-+                      break;
-+              case VTS3:
-+                      mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
-+                      break;
-+              case VTS4:
-+                      mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
-+                      break;
-+              case VTS5:
-+                      mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
-+                      break;
-+              case VTSABB:
-+                      mt->vts[VTSABB] =
-+                              CALIB_BUF2_VTS_TSABB_V1(buf[2]);
-+                      break;
-+              default:
-+                      break;
-+              }
-+      }
-+
-+      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
-+      if (CALIB_BUF1_ID_V1(buf[1]) &
-+          CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
-+              mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
-+      else
-+              mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
-+
-+      return 0;
-+}
-+
-+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
-+{
-+      if (!CALIB_BUF1_VALID_V2(buf[1]))
-+              return -EINVAL;
-+
-+      mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
-+      mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
-+      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
-+      mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
-+      mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
-+      mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
-+      mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
-+      mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
-+
-+      return 0;
-+}
-+
-+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
-+{
-+      if (!CALIB_BUF1_VALID_V3(buf[1]))
-+              return -EINVAL;
-+
-+      mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
-+      mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
-+      mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
-+      mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
-+      mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
-+      mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
-+      mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
-+
-+      if (CALIB_BUF1_ID_V3(buf[1]) == 0)
-+              mt->o_slope = 0;
-+
-+      return 0;
-+}
-+
-+static int mtk_thermal_get_calibration_data(struct device *dev,
-+                                          struct mtk_thermal *mt)
-+{
-+      struct nvmem_cell *cell;
-+      u32 *buf;
-+      size_t len;
-+      int i, ret = 0;
-+
-+      /* Start with default values */
-+      mt->adc_ge = 512;
-+      mt->adc_oe = 512;
-+      for (i = 0; i < mt->conf->num_sensors; i++)
-+              mt->vts[i] = 260;
-+      mt->degc_cali = 40;
-+      mt->o_slope = 0;
-+
-+      cell = nvmem_cell_get(dev, "calibration-data");
-+      if (IS_ERR(cell)) {
-+              if (PTR_ERR(cell) == -EPROBE_DEFER)
-+                      return PTR_ERR(cell);
-+              return 0;
-+      }
-+
-+      buf = (u32 *)nvmem_cell_read(cell, &len);
-+
-+      nvmem_cell_put(cell);
-+
-+      if (IS_ERR(buf))
-+              return PTR_ERR(buf);
-+
-+      if (len < 3 * sizeof(u32)) {
-+              dev_warn(dev, "invalid calibration data\n");
-+              ret = -EINVAL;
-+              goto out;
-+      }
-+
-+      switch (mt->conf->version) {
-+      case MTK_THERMAL_V1:
-+              ret = mtk_thermal_extract_efuse_v1(mt, buf);
-+              break;
-+      case MTK_THERMAL_V2:
-+              ret = mtk_thermal_extract_efuse_v2(mt, buf);
-+              break;
-+      case MTK_THERMAL_V3:
-+              ret = mtk_thermal_extract_efuse_v3(mt, buf);
-+              break;
-+      default:
-+              ret = -EINVAL;
-+              break;
-+      }
-+
-+      if (ret) {
-+              dev_info(dev, "Device not calibrated, using default calibration values\n");
-+              ret = 0;
-+      }
-+
-+out:
-+      kfree(buf);
-+
-+      return ret;
-+}
-+
-+static const struct of_device_id mtk_thermal_of_match[] = {
-+      {
-+              .compatible = "mediatek,mt8173-thermal",
-+              .data = (void *)&mt8173_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt2701-thermal",
-+              .data = (void *)&mt2701_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt2712-thermal",
-+              .data = (void *)&mt2712_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt7622-thermal",
-+              .data = (void *)&mt7622_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt7986-thermal",
-+              .data = (void *)&mt7986_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt8183-thermal",
-+              .data = (void *)&mt8183_thermal_data,
-+      }, {
-+      },
-+};
-+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
-+
-+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
-+{
-+      int tmp;
-+
-+      tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-+      tmp &= ~(0x37);
-+      tmp |= 0x1;
-+      writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
-+      udelay(200);
-+}
-+
-+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
-+                                          void __iomem *auxadc_base)
-+{
-+      int tmp;
-+
-+      writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
-+      writel(0x1, mt->thermal_base + TEMP_MONCTL0);
-+      tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
-+      writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
-+}
-+
-+static int mtk_thermal_probe(struct platform_device *pdev)
-+{
-+      int ret, i, ctrl_id;
-+      struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
-+      struct mtk_thermal *mt;
-+      u64 auxadc_phys_base, apmixed_phys_base;
-+      struct thermal_zone_device *tzdev;
-+      void __iomem *apmixed_base, *auxadc_base;
-+
-+      mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
-+      if (!mt)
-+              return -ENOMEM;
-+
-+      mt->conf = of_device_get_match_data(&pdev->dev);
-+
-+      mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
-+      if (IS_ERR(mt->clk_peri_therm))
-+              return PTR_ERR(mt->clk_peri_therm);
-+
-+      mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
-+      if (IS_ERR(mt->clk_auxadc))
-+              return PTR_ERR(mt->clk_auxadc);
-+
-+      mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-+      if (IS_ERR(mt->thermal_base))
-+              return PTR_ERR(mt->thermal_base);
-+
-+      ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
-+      if (ret)
-+              return ret;
-+
-+      mutex_init(&mt->lock);
-+
-+      mt->dev = &pdev->dev;
-+
-+      auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
-+      if (!auxadc) {
-+              dev_err(&pdev->dev, "missing auxadc node\n");
-+              return -ENODEV;
-+      }
-+
-+      auxadc_base = of_iomap(auxadc, 0);
-+      auxadc_phys_base = of_get_phys_base(auxadc);
-+
-+      of_node_put(auxadc);
-+
-+      if (auxadc_phys_base == OF_BAD_ADDR) {
-+              dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-+              return -EINVAL;
-+      }
-+
-+      apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
-+      if (!apmixedsys) {
-+              dev_err(&pdev->dev, "missing apmixedsys node\n");
-+              return -ENODEV;
-+      }
-+
-+      apmixed_base = of_iomap(apmixedsys, 0);
-+      apmixed_phys_base = of_get_phys_base(apmixedsys);
-+
-+      of_node_put(apmixedsys);
-+
-+      if (apmixed_phys_base == OF_BAD_ADDR) {
-+              dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-+              return -EINVAL;
-+      }
-+
-+      ret = device_reset_optional(&pdev->dev);
-+      if (ret)
-+              return ret;
-+
-+      ret = clk_prepare_enable(mt->clk_auxadc);
-+      if (ret) {
-+              dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
-+              return ret;
-+      }
-+
-+      ret = clk_prepare_enable(mt->clk_peri_therm);
-+      if (ret) {
-+              dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
-+              goto err_disable_clk_auxadc;
-+      }
-+
-+      if (mt->conf->version != MTK_THERMAL_V1) {
-+              mtk_thermal_turn_on_buffer(apmixed_base);
-+              mtk_thermal_release_periodic_ts(mt, auxadc_base);
-+      }
-+
-+      if (mt->conf->version == MTK_THERMAL_V1)
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-+      else if (mt->conf->version == MTK_THERMAL_V2)
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+      else
-+              mt->raw_to_mcelsius = raw_to_mcelsius_v3;
-+
-+      for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
-+              for (i = 0; i < mt->conf->num_banks; i++)
-+                      mtk_thermal_init_bank(mt, i, apmixed_phys_base,
-+                                            auxadc_phys_base, ctrl_id);
-+
-+      platform_set_drvdata(pdev, mt);
-+
-+      tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-+                                            &mtk_thermal_ops);
-+      if (IS_ERR(tzdev)) {
-+              ret = PTR_ERR(tzdev);
-+              goto err_disable_clk_peri_therm;
-+      }
-+
-+      ret = devm_thermal_add_hwmon_sysfs(tzdev);
-+      if (ret)
-+              dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
-+
-+      return 0;
-+
-+err_disable_clk_peri_therm:
-+      clk_disable_unprepare(mt->clk_peri_therm);
-+err_disable_clk_auxadc:
-+      clk_disable_unprepare(mt->clk_auxadc);
-+
-+      return ret;
-+}
-+
-+static int mtk_thermal_remove(struct platform_device *pdev)
-+{
-+      struct mtk_thermal *mt = platform_get_drvdata(pdev);
-+
-+      clk_disable_unprepare(mt->clk_peri_therm);
-+      clk_disable_unprepare(mt->clk_auxadc);
-+
-+      return 0;
-+}
-+
-+static struct platform_driver mtk_thermal_driver = {
-+      .probe = mtk_thermal_probe,
-+      .remove = mtk_thermal_remove,
-+      .driver = {
-+              .name = "mtk-thermal",
-+              .of_match_table = mtk_thermal_of_match,
-+      },
-+};
-+
-+module_platform_driver(mtk_thermal_driver);
-+
-+MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
-+MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
-+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
-+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-+MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
-+MODULE_DESCRIPTION("Mediatek thermal driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mediatek/patches-6.6/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch b/target/linux/mediatek/patches-6.6/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch
deleted file mode 100644 (file)
index 2ae3734..0000000
+++ /dev/null
@@ -1,1298 +0,0 @@
-From 325fadf27b21f7d79843c3cc282b7f3e6620ad3d Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:26 +0100
-Subject: [PATCH 06/42] thermal/drivers/mediatek: Add the Low Voltage Thermal
- Sensor driver
-
-The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi
-controllers contained in a thermal domain.
-
-A thermal domains can be the MCU or the AP.
-
-Each thermal domains contain up to seven controllers, each thermal
-controller handle up to four thermal sensors.
-
-The LVTS has two Finite State Machines (FSM), one to handle the
-functionin temperatures range like hot or cold temperature and another
-one to handle monitoring trip point. The FSM notifies via interrupts
-when a trip point is crossed.
-
-The interrupt is managed at the thermal controller level, so when an
-interrupt occurs, the driver has to find out which sensor triggered
-such an interrupt.
-
-The sampling of the thermal can be filtered or immediate. For the
-former, the LVTS measures several points and applies a low pass
-filter.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
-On MT8195 Tomato Chromebook:
-
-Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230209105628.50294-5-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/Kconfig        |   16 +
- drivers/thermal/mediatek/Makefile       |    1 +
- drivers/thermal/mediatek/lvts_thermal.c | 1224 +++++++++++++++++++++++
- 3 files changed, 1241 insertions(+)
- create mode 100644 drivers/thermal/mediatek/lvts_thermal.c
-
---- a/drivers/thermal/mediatek/Kconfig
-+++ b/drivers/thermal/mediatek/Kconfig
-@@ -18,4 +18,20 @@ config MTK_SOC_THERMAL
-         This driver configures thermal controllers to collect
-         temperature via AUXADC interface.
-+config MTK_LVTS_THERMAL
-+        tristate "LVTS Thermal Driver for MediaTek SoCs"
-+        depends on HAS_IOMEM
-+        help
-+          Enable this option if you want to get SoC temperature
-+          information for supported MediaTek platforms.
-+          This driver configures LVTS (Low Voltage Thermal Sensor)
-+          thermal controllers to collect temperatures via ASIF
-+          (Analog Serial Interface).
-+
-+config MTK_LVTS_THERMAL_DEBUGFS
-+       bool "LVTS thermal debugfs"
-+       depends on MTK_LVTS_THERMAL && DEBUG_FS
-+       help
-+         Enable this option to debug the internals of the device driver.
-+
- endif
---- a/drivers/thermal/mediatek/Makefile
-+++ b/drivers/thermal/mediatek/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o
-+obj-$(CONFIG_MTK_LVTS_THERMAL)        += lvts_thermal.o
---- /dev/null
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -0,0 +1,1224 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Author: Balsam CHIHI <bchihi@baylibre.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/delay.h>
-+#include <linux/debugfs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/iopoll.h>
-+#include <linux/kernel.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+#include <linux/thermal.h>
-+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-+
-+#define LVTS_MONCTL0(__base)  (__base + 0x0000)
-+#define LVTS_MONCTL1(__base)  (__base + 0x0004)
-+#define LVTS_MONCTL2(__base)  (__base + 0x0008)
-+#define LVTS_MONINT(__base)           (__base + 0x000C)
-+#define LVTS_MONINTSTS(__base)        (__base + 0x0010)
-+#define LVTS_MONIDET0(__base) (__base + 0x0014)
-+#define LVTS_MONIDET1(__base) (__base + 0x0018)
-+#define LVTS_MONIDET2(__base) (__base + 0x001C)
-+#define LVTS_MONIDET3(__base) (__base + 0x0020)
-+#define LVTS_H2NTHRE(__base)  (__base + 0x0024)
-+#define LVTS_HTHRE(__base)            (__base + 0x0028)
-+#define LVTS_OFFSETH(__base)  (__base + 0x0030)
-+#define LVTS_OFFSETL(__base)  (__base + 0x0034)
-+#define LVTS_MSRCTL0(__base)  (__base + 0x0038)
-+#define LVTS_MSRCTL1(__base)  (__base + 0x003C)
-+#define LVTS_TSSEL(__base)            (__base + 0x0040)
-+#define LVTS_CALSCALE(__base) (__base + 0x0048)
-+#define LVTS_ID(__base)                       (__base + 0x004C)
-+#define LVTS_CONFIG(__base)           (__base + 0x0050)
-+#define LVTS_EDATA00(__base)  (__base + 0x0054)
-+#define LVTS_EDATA01(__base)  (__base + 0x0058)
-+#define LVTS_EDATA02(__base)  (__base + 0x005C)
-+#define LVTS_EDATA03(__base)  (__base + 0x0060)
-+#define LVTS_MSR0(__base)             (__base + 0x0090)
-+#define LVTS_MSR1(__base)             (__base + 0x0094)
-+#define LVTS_MSR2(__base)             (__base + 0x0098)
-+#define LVTS_MSR3(__base)             (__base + 0x009C)
-+#define LVTS_IMMD0(__base)            (__base + 0x00A0)
-+#define LVTS_IMMD1(__base)            (__base + 0x00A4)
-+#define LVTS_IMMD2(__base)            (__base + 0x00A8)
-+#define LVTS_IMMD3(__base)            (__base + 0x00AC)
-+#define LVTS_PROTCTL(__base)  (__base + 0x00C0)
-+#define LVTS_PROTTA(__base)           (__base + 0x00C4)
-+#define LVTS_PROTTB(__base)           (__base + 0x00C8)
-+#define LVTS_PROTTC(__base)           (__base + 0x00CC)
-+#define LVTS_CLKEN(__base)            (__base + 0x00E4)
-+
-+#define LVTS_PERIOD_UNIT                      ((118 * 1000) / (256 * 38))
-+#define LVTS_GROUP_INTERVAL                   1
-+#define LVTS_FILTER_INTERVAL          1
-+#define LVTS_SENSOR_INTERVAL          1
-+#define LVTS_HW_FILTER                                0x2
-+#define LVTS_TSSEL_CONF                               0x13121110
-+#define LVTS_CALSCALE_CONF                    0x300
-+#define LVTS_MONINT_CONF                      0x9FBF7BDE
-+
-+#define LVTS_INT_SENSOR0                      0x0009001F
-+#define LVTS_INT_SENSOR1                      0X000881F0
-+#define LVTS_INT_SENSOR2                      0x00247C00
-+#define LVTS_INT_SENSOR3                      0x1FC00000
-+
-+#define LVTS_SENSOR_MAX                               4
-+#define LVTS_GOLDEN_TEMP_MAX          62
-+#define LVTS_GOLDEN_TEMP_DEFAULT      50
-+#define LVTS_COEFF_A                          -250460
-+#define LVTS_COEFF_B                          250460
-+
-+#define LVTS_MSR_IMMEDIATE_MODE               0
-+#define LVTS_MSR_FILTERED_MODE                1
-+
-+#define LVTS_HW_SHUTDOWN_MT8195               105000
-+
-+static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
-+static int coeff_b = LVTS_COEFF_B;
-+
-+struct lvts_sensor_data {
-+      int dt_id;
-+};
-+
-+struct lvts_ctrl_data {
-+      struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX];
-+      int cal_offset[LVTS_SENSOR_MAX];
-+      int hw_tshut_temp;
-+      int num_lvts_sensor;
-+      int offset;
-+      int mode;
-+};
-+
-+struct lvts_data {
-+      const struct lvts_ctrl_data *lvts_ctrl;
-+      int num_lvts_ctrl;
-+};
-+
-+struct lvts_sensor {
-+      struct thermal_zone_device *tz;
-+      void __iomem *msr;
-+      void __iomem *base;
-+      int id;
-+      int dt_id;
-+};
-+
-+struct lvts_ctrl {
-+      struct lvts_sensor sensors[LVTS_SENSOR_MAX];
-+      u32 calibration[LVTS_SENSOR_MAX];
-+      u32 hw_tshut_raw_temp;
-+      int num_lvts_sensor;
-+      int mode;
-+      void __iomem *base;
-+};
-+
-+struct lvts_domain {
-+      struct lvts_ctrl *lvts_ctrl;
-+      struct reset_control *reset;
-+      struct clk *clk;
-+      int num_lvts_ctrl;
-+      void __iomem *base;
-+      size_t calib_len;
-+      u8 *calib;
-+#ifdef CONFIG_DEBUG_FS
-+      struct dentry *dom_dentry;
-+#endif
-+};
-+
-+#ifdef CONFIG_MTK_LVTS_THERMAL_DEBUGFS
-+
-+#define LVTS_DEBUG_FS_REGS(__reg)             \
-+{                                             \
-+      .name = __stringify(__reg),             \
-+      .offset = __reg(0),                     \
-+}
-+
-+static const struct debugfs_reg32 lvts_regs[] = {
-+      LVTS_DEBUG_FS_REGS(LVTS_MONCTL0),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONCTL1),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONCTL2),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONINT),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONINTSTS),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONIDET0),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONIDET1),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONIDET2),
-+      LVTS_DEBUG_FS_REGS(LVTS_MONIDET3),
-+      LVTS_DEBUG_FS_REGS(LVTS_H2NTHRE),
-+      LVTS_DEBUG_FS_REGS(LVTS_HTHRE),
-+      LVTS_DEBUG_FS_REGS(LVTS_OFFSETH),
-+      LVTS_DEBUG_FS_REGS(LVTS_OFFSETL),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSRCTL0),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSRCTL1),
-+      LVTS_DEBUG_FS_REGS(LVTS_TSSEL),
-+      LVTS_DEBUG_FS_REGS(LVTS_CALSCALE),
-+      LVTS_DEBUG_FS_REGS(LVTS_ID),
-+      LVTS_DEBUG_FS_REGS(LVTS_CONFIG),
-+      LVTS_DEBUG_FS_REGS(LVTS_EDATA00),
-+      LVTS_DEBUG_FS_REGS(LVTS_EDATA01),
-+      LVTS_DEBUG_FS_REGS(LVTS_EDATA02),
-+      LVTS_DEBUG_FS_REGS(LVTS_EDATA03),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSR0),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSR1),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSR2),
-+      LVTS_DEBUG_FS_REGS(LVTS_MSR3),
-+      LVTS_DEBUG_FS_REGS(LVTS_IMMD0),
-+      LVTS_DEBUG_FS_REGS(LVTS_IMMD1),
-+      LVTS_DEBUG_FS_REGS(LVTS_IMMD2),
-+      LVTS_DEBUG_FS_REGS(LVTS_IMMD3),
-+      LVTS_DEBUG_FS_REGS(LVTS_PROTCTL),
-+      LVTS_DEBUG_FS_REGS(LVTS_PROTTA),
-+      LVTS_DEBUG_FS_REGS(LVTS_PROTTB),
-+      LVTS_DEBUG_FS_REGS(LVTS_PROTTC),
-+      LVTS_DEBUG_FS_REGS(LVTS_CLKEN),
-+};
-+
-+static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td)
-+{
-+      struct debugfs_regset32 *regset;
-+      struct lvts_ctrl *lvts_ctrl;
-+      struct dentry *dentry;
-+      char name[64];
-+      int i;
-+
-+      lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL);
-+      if (!lvts_td->dom_dentry)
-+              return 0;
-+
-+      for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+              lvts_ctrl = &lvts_td->lvts_ctrl[i];
-+
-+              sprintf(name, "controller%d", i);
-+              dentry = debugfs_create_dir(name, lvts_td->dom_dentry);
-+              if (!dentry)
-+                      continue;
-+
-+              regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL);
-+              if (!regset)
-+                      continue;
-+
-+              regset->base = lvts_ctrl->base;
-+              regset->regs = lvts_regs;
-+              regset->nregs = ARRAY_SIZE(lvts_regs);
-+
-+              debugfs_create_regset32("registers", 0400, dentry, regset);
-+      }
-+
-+      return 0;
-+}
-+
-+static void lvts_debugfs_exit(struct lvts_domain *lvts_td)
-+{
-+      debugfs_remove_recursive(lvts_td->dom_dentry);
-+}
-+
-+#else
-+
-+static inline int lvts_debugfs_init(struct device *dev,
-+                                  struct lvts_domain *lvts_td)
-+{
-+      return 0;
-+}
-+
-+static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
-+
-+#endif
-+
-+static int lvts_raw_to_temp(u32 raw_temp)
-+{
-+      int temperature;
-+
-+      temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
-+      temperature += coeff_b;
-+
-+      return temperature;
-+}
-+
-+static u32 lvts_temp_to_raw(int temperature)
-+{
-+      u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
-+
-+      raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
-+
-+      return raw_temp;
-+}
-+
-+static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
-+{
-+      struct lvts_sensor *lvts_sensor = tz->devdata;
-+      void __iomem *msr = lvts_sensor->msr;
-+      u32 value;
-+
-+      /*
-+       * Measurement registers:
-+       *
-+       * LVTS_MSR[0-3] / LVTS_IMMD[0-3]
-+       *
-+       * Bits:
-+       *
-+       * 32-17: Unused
-+       * 16   : Valid temperature
-+       * 15-0 : Raw temperature
-+       */
-+      value = readl(msr);
-+
-+      /*
-+       * As the thermal zone temperature will read before the
-+       * hardware sensor is fully initialized, we have to check the
-+       * validity of the temperature returned when reading the
-+       * measurement register. The thermal controller will set the
-+       * valid bit temperature only when it is totally initialized.
-+       *
-+       * Otherwise, we may end up with garbage values out of the
-+       * functionning temperature and directly jump to a system
-+       * shutdown.
-+       */
-+      if (!(value & BIT(16)))
-+              return -EAGAIN;
-+
-+      *temp = lvts_raw_to_temp(value & 0xFFFF);
-+
-+      return 0;
-+}
-+
-+static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
-+{
-+      struct lvts_sensor *lvts_sensor = tz->devdata;
-+      void __iomem *base = lvts_sensor->base;
-+      u32 raw_low = lvts_temp_to_raw(low);
-+      u32 raw_high = lvts_temp_to_raw(high);
-+
-+      /*
-+       * Hot to normal temperature threshold
-+       *
-+       * LVTS_H2NTHRE
-+       *
-+       * Bits:
-+       *
-+       * 14-0 : Raw temperature for threshold
-+       */
-+      if (low != -INT_MAX) {
-+              dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low);
-+              writel(raw_low, LVTS_H2NTHRE(base));
-+      }
-+
-+      /*
-+       * Hot temperature threshold
-+       *
-+       * LVTS_HTHRE
-+       *
-+       * Bits:
-+       *
-+       * 14-0 : Raw temperature for threshold
-+       */
-+      dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high);
-+      writel(raw_high, LVTS_HTHRE(base));
-+
-+      return 0;
-+}
-+
-+static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
-+{
-+      irqreturn_t iret = IRQ_NONE;
-+      u32 value;
-+      u32 masks[] = {
-+              LVTS_INT_SENSOR0,
-+              LVTS_INT_SENSOR1,
-+              LVTS_INT_SENSOR2,
-+              LVTS_INT_SENSOR3
-+      };
-+      int i;
-+
-+      /*
-+       * Interrupt monitoring status
-+       *
-+       * LVTS_MONINTST
-+       *
-+       * Bits:
-+       *
-+       * 31 : Interrupt for stage 3
-+       * 30 : Interrupt for stage 2
-+       * 29 : Interrupt for state 1
-+       * 28 : Interrupt using filter on sensor 3
-+       *
-+       * 27 : Interrupt using immediate on sensor 3
-+       * 26 : Interrupt normal to hot on sensor 3
-+       * 25 : Interrupt high offset on sensor 3
-+       * 24 : Interrupt low offset on sensor 3
-+       *
-+       * 23 : Interrupt hot threshold on sensor 3
-+       * 22 : Interrupt cold threshold on sensor 3
-+       * 21 : Interrupt using filter on sensor 2
-+       * 20 : Interrupt using filter on sensor 1
-+       *
-+       * 19 : Interrupt using filter on sensor 0
-+       * 18 : Interrupt using immediate on sensor 2
-+       * 17 : Interrupt using immediate on sensor 1
-+       * 16 : Interrupt using immediate on sensor 0
-+       *
-+       * 15 : Interrupt device access timeout interrupt
-+       * 14 : Interrupt normal to hot on sensor 2
-+       * 13 : Interrupt high offset interrupt on sensor 2
-+       * 12 : Interrupt low offset interrupt on sensor 2
-+       *
-+       * 11 : Interrupt hot threshold on sensor 2
-+       * 10 : Interrupt cold threshold on sensor 2
-+       *  9 : Interrupt normal to hot on sensor 1
-+       *  8 : Interrupt high offset interrupt on sensor 1
-+       *
-+       *  7 : Interrupt low offset interrupt on sensor 1
-+       *  6 : Interrupt hot threshold on sensor 1
-+       *  5 : Interrupt cold threshold on sensor 1
-+       *  4 : Interrupt normal to hot on sensor 0
-+       *
-+       *  3 : Interrupt high offset interrupt on sensor 0
-+       *  2 : Interrupt low offset interrupt on sensor 0
-+       *  1 : Interrupt hot threshold on sensor 0
-+       *  0 : Interrupt cold threshold on sensor 0
-+       *
-+       * We are interested in the sensor(s) responsible of the
-+       * interrupt event. We update the thermal framework with the
-+       * thermal zone associated with the sensor. The framework will
-+       * take care of the rest whatever the kind of interrupt, we
-+       * are only interested in which sensor raised the interrupt.
-+       *
-+       * sensor 3 interrupt: 0001 1111 1100 0000 0000 0000 0000 0000
-+       *                  => 0x1FC00000
-+       * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
-+       *                  => 0x00247C00
-+       * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
-+       *                  => 0X000881F0
-+       * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
-+       *                  => 0x0009001F
-+       */
-+      value = readl(LVTS_MONINTSTS(lvts_ctrl->base));
-+
-+      /*
-+       * Let's figure out which sensors raised the interrupt
-+       *
-+       * NOTE: the masks array must be ordered with the index
-+       * corresponding to the sensor id eg. index=0, mask for
-+       * sensor0.
-+       */
-+      for (i = 0; i < ARRAY_SIZE(masks); i++) {
-+
-+              if (!(value & masks[i]))
-+                      continue;
-+
-+              thermal_zone_device_update(lvts_ctrl->sensors[i].tz,
-+                                         THERMAL_TRIP_VIOLATED);
-+              iret = IRQ_HANDLED;
-+      }
-+
-+      /*
-+       * Write back to clear the interrupt status (W1C)
-+       */
-+      writel(value, LVTS_MONINTSTS(lvts_ctrl->base));
-+
-+      return iret;
-+}
-+
-+/*
-+ * Temperature interrupt handler. Even if the driver supports more
-+ * interrupt modes, we use the interrupt when the temperature crosses
-+ * the hot threshold the way up and the way down (modulo the
-+ * hysteresis).
-+ *
-+ * Each thermal domain has a couple of interrupts, one for hardware
-+ * reset and another one for all the thermal events happening on the
-+ * different sensors.
-+ *
-+ * The interrupt is configured for thermal events when crossing the
-+ * hot temperature limit. At each interrupt, we check in every
-+ * controller if there is an interrupt pending.
-+ */
-+static irqreturn_t lvts_irq_handler(int irq, void *data)
-+{
-+      struct lvts_domain *lvts_td = data;
-+      irqreturn_t aux, iret = IRQ_NONE;
-+      int i;
-+
-+      for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+              aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
-+              if (aux != IRQ_HANDLED)
-+                      continue;
-+
-+              iret = IRQ_HANDLED;
-+      }
-+
-+      return iret;
-+}
-+
-+static struct thermal_zone_device_ops lvts_ops = {
-+      .get_temp = lvts_get_temp,
-+      .set_trips = lvts_set_trips,
-+};
-+
-+static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
-+                                      const struct lvts_ctrl_data *lvts_ctrl_data)
-+{
-+      struct lvts_sensor *lvts_sensor = lvts_ctrl->sensors;
-+      void __iomem *msr_regs[] = {
-+              LVTS_MSR0(lvts_ctrl->base),
-+              LVTS_MSR1(lvts_ctrl->base),
-+              LVTS_MSR2(lvts_ctrl->base),
-+              LVTS_MSR3(lvts_ctrl->base)
-+      };
-+
-+      void __iomem *imm_regs[] = {
-+              LVTS_IMMD0(lvts_ctrl->base),
-+              LVTS_IMMD1(lvts_ctrl->base),
-+              LVTS_IMMD2(lvts_ctrl->base),
-+              LVTS_IMMD3(lvts_ctrl->base)
-+      };
-+
-+      int i;
-+
-+      for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) {
-+
-+              int dt_id = lvts_ctrl_data->lvts_sensor[i].dt_id;
-+
-+              /*
-+               * At this point, we don't know which id matches which
-+               * sensor. Let's set arbitrally the id from the index.
-+               */
-+              lvts_sensor[i].id = i;
-+
-+              /*
-+               * The thermal zone registration will set the trip
-+               * point interrupt in the thermal controller
-+               * register. But this one will be reset in the
-+               * initialization after. So we need to post pone the
-+               * thermal zone creation after the controller is
-+               * setup. For this reason, we store the device tree
-+               * node id from the data in the sensor structure
-+               */
-+              lvts_sensor[i].dt_id = dt_id;
-+
-+              /*
-+               * We assign the base address of the thermal
-+               * controller as a back pointer. So it will be
-+               * accessible from the different thermal framework ops
-+               * as we pass the lvts_sensor pointer as thermal zone
-+               * private data.
-+               */
-+              lvts_sensor[i].base = lvts_ctrl->base;
-+
-+              /*
-+               * Each sensor has its own register address to read from.
-+               */
-+              lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ?
-+                      imm_regs[i] : msr_regs[i];
-+      };
-+
-+      lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
-+
-+      return 0;
-+}
-+
-+/*
-+ * The efuse blob values follows the sensor enumeration per thermal
-+ * controller. The decoding of the stream is as follow:
-+ *
-+ *                        <--?-> <----big0 ???---> <-sensor0-> <-0->
-+ *                        ------------------------------------------
-+ * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
-+ *                        ------------------------------------------
-+ *
-+ *                        <--sensor1--><-0-> <----big1 ???---> <-sen
-+ *                        ------------------------------------------
-+ *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-+ *                        ------------------------------------------
-+ *
-+ *                        sor0-> <-0-> <-sensor1-> <-0-> ..........
-+ *                        ------------------------------------------
-+ *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-+ *                        ------------------------------------------
-+ *
-+ * And so on ...
-+ *
-+ * The data description gives the offset of the calibration data in
-+ * this bytes stream for each sensor.
-+ *
-+ * Each thermal controller can handle up to 4 sensors max, we don't
-+ * care if there are less as the array of calibration is sized to 4
-+ * anyway. The unused sensor slot will be zeroed.
-+ */
-+static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
-+                                      const struct lvts_ctrl_data *lvts_ctrl_data,
-+                                      u8 *efuse_calibration)
-+{
-+      int i;
-+
-+      for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++)
-+              memcpy(&lvts_ctrl->calibration[i],
-+                     efuse_calibration + lvts_ctrl_data->cal_offset[i], 2);
-+
-+      return 0;
-+}
-+
-+/*
-+ * The efuse bytes stream can be split into different chunk of
-+ * nvmems. This function reads and concatenate those into a single
-+ * buffer so it can be read sequentially when initializing the
-+ * calibration data.
-+ */
-+static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td,
-+                                      const struct lvts_data *lvts_data)
-+{
-+      struct device_node *np = dev_of_node(dev);
-+      struct nvmem_cell *cell;
-+      struct property *prop;
-+      const char *cell_name;
-+
-+      of_property_for_each_string(np, "nvmem-cell-names", prop, cell_name) {
-+              size_t len;
-+              u8 *efuse;
-+
-+              cell = of_nvmem_cell_get(np, cell_name);
-+              if (IS_ERR(cell)) {
-+                      dev_err(dev, "Failed to get cell '%s'\n", cell_name);
-+                      return PTR_ERR(cell);
-+              }
-+
-+              efuse = nvmem_cell_read(cell, &len);
-+
-+              nvmem_cell_put(cell);
-+
-+              if (IS_ERR(efuse)) {
-+                      dev_err(dev, "Failed to read cell '%s'\n", cell_name);
-+                      return PTR_ERR(efuse);
-+              }
-+
-+              lvts_td->calib = devm_krealloc(dev, lvts_td->calib,
-+                                             lvts_td->calib_len + len, GFP_KERNEL);
-+              if (!lvts_td->calib)
-+                      return -ENOMEM;
-+
-+              memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len);
-+
-+              lvts_td->calib_len += len;
-+
-+              kfree(efuse);
-+      }
-+
-+      return 0;
-+}
-+
-+static int lvts_golden_temp_init(struct device *dev, u32 *value)
-+{
-+      u32 gt;
-+
-+      gt = (*value) >> 24;
-+
-+      if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
-+              golden_temp = gt;
-+
-+      coeff_b = golden_temp * 500 + LVTS_COEFF_B;
-+
-+      return 0;
-+}
-+
-+static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
-+                                      const struct lvts_data *lvts_data)
-+{
-+      size_t size = sizeof(*lvts_td->lvts_ctrl) * lvts_data->num_lvts_ctrl;
-+      struct lvts_ctrl *lvts_ctrl;
-+      int i, ret;
-+
-+      /*
-+       * Create the calibration bytes stream from efuse data
-+       */
-+      ret = lvts_calibration_read(dev, lvts_td, lvts_data);
-+      if (ret)
-+              return ret;
-+
-+      /*
-+       * The golden temp information is contained in the first chunk
-+       * of efuse data.
-+       */
-+      ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
-+      if (ret)
-+              return ret;
-+
-+      lvts_ctrl = devm_kzalloc(dev, size, GFP_KERNEL);
-+      if (!lvts_ctrl)
-+              return -ENOMEM;
-+
-+      for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
-+
-+              lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
-+
-+              ret = lvts_sensor_init(dev, &lvts_ctrl[i],
-+                                     &lvts_data->lvts_ctrl[i]);
-+              if (ret)
-+                      return ret;
-+
-+              ret = lvts_calibration_init(dev, &lvts_ctrl[i],
-+                                          &lvts_data->lvts_ctrl[i],
-+                                          lvts_td->calib);
-+              if (ret)
-+                      return ret;
-+
-+              /*
-+               * The mode the ctrl will use to read the temperature
-+               * (filtered or immediate)
-+               */
-+              lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode;
-+
-+              /*
-+               * The temperature to raw temperature must be done
-+               * after initializing the calibration.
-+               */
-+              lvts_ctrl[i].hw_tshut_raw_temp =
-+                      lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
-+      }
-+
-+      /*
-+       * We no longer need the efuse bytes stream, let's free it
-+       */
-+      devm_kfree(dev, lvts_td->calib);
-+
-+      lvts_td->lvts_ctrl = lvts_ctrl;
-+      lvts_td->num_lvts_ctrl = lvts_data->num_lvts_ctrl;
-+
-+      return 0;
-+}
-+
-+/*
-+ * At this point the configuration register is the only place in the
-+ * driver where we write multiple values. Per hardware constraint,
-+ * each write in the configuration register must be separated by a
-+ * delay of 2 us.
-+ */
-+static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds)
-+{
-+      int i;
-+
-+      /*
-+       * Configuration register
-+       */
-+      for (i = 0; i < nr_cmds; i++) {
-+              writel(cmds[i], LVTS_CONFIG(lvts_ctrl->base));
-+              usleep_range(2, 4);
-+      }
-+}
-+
-+static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl)
-+{
-+      /*
-+       * LVTS_PROTCTL : Thermal Protection Sensor Selection
-+       *
-+       * Bits:
-+       *
-+       * 19-18 : Sensor to base the protection on
-+       * 17-16 : Strategy:
-+       *         00 : Average of 4 sensors
-+       *         01 : Max of 4 sensors
-+       *         10 : Selected sensor with bits 19-18
-+       *         11 : Reserved
-+       */
-+      writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base));
-+
-+      /*
-+       * LVTS_PROTTA : Stage 1 temperature threshold
-+       * LVTS_PROTTB : Stage 2 temperature threshold
-+       * LVTS_PROTTC : Stage 3 temperature threshold
-+       *
-+       * Bits:
-+       *
-+       * 14-0: Raw temperature threshold
-+       *
-+       * writel(0x0, LVTS_PROTTA(lvts_ctrl->base));
-+       * writel(0x0, LVTS_PROTTB(lvts_ctrl->base));
-+       */
-+      writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base));
-+
-+      /*
-+       * LVTS_MONINT : Interrupt configuration register
-+       *
-+       * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS
-+       * register, except we set the bits to enable the interrupt.
-+       */
-+      writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base));
-+
-+      return 0;
-+}
-+
-+static int lvts_domain_reset(struct device *dev, struct reset_control *reset)
-+{
-+      int ret;
-+
-+      ret = reset_control_assert(reset);
-+      if (ret)
-+              return ret;
-+
-+      return reset_control_deassert(reset);
-+}
-+
-+/*
-+ * Enable or disable the clocks of a specified thermal controller
-+ */
-+static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable)
-+{
-+      /*
-+       * LVTS_CLKEN : Internal LVTS clock
-+       *
-+       * Bits:
-+       *
-+       * 0 : enable / disable clock
-+       */
-+      writel(enable, LVTS_CLKEN(lvts_ctrl->base));
-+
-+      return 0;
-+}
-+
-+static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+      u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 };
-+
-+      lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
-+
-+      /*
-+       * LVTS_ID : Get ID and status of the thermal controller
-+       *
-+       * Bits:
-+       *
-+       * 0-5  : thermal controller id
-+       *   7  : thermal controller connection is valid
-+       */
-+      id = readl(LVTS_ID(lvts_ctrl->base));
-+      if (!(id & BIT(7)))
-+              return -EIO;
-+
-+      return 0;
-+}
-+
-+static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+      /*
-+       * Write device mask: 0xC1030000
-+       */
-+      u32 cmds[] = {
-+              0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1,
-+              0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300,
-+              0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC,
-+              0xC10300FC, 0xC103009D, 0xC10300F1, 0xC10300E1
-+      };
-+
-+      lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
-+
-+      return 0;
-+}
-+
-+static int lvts_ctrl_calibrate(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+      int i;
-+      void __iomem *lvts_edata[] = {
-+              LVTS_EDATA00(lvts_ctrl->base),
-+              LVTS_EDATA01(lvts_ctrl->base),
-+              LVTS_EDATA02(lvts_ctrl->base),
-+              LVTS_EDATA03(lvts_ctrl->base)
-+      };
-+
-+      /*
-+       * LVTS_EDATA0X : Efuse calibration reference value for sensor X
-+       *
-+       * Bits:
-+       *
-+       * 20-0 : Efuse value for normalization data
-+       */
-+      for (i = 0; i < LVTS_SENSOR_MAX; i++)
-+              writel(lvts_ctrl->calibration[i], lvts_edata[i]);
-+
-+      return 0;
-+}
-+
-+static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+      u32 value;
-+
-+      /*
-+       * LVTS_TSSEL : Sensing point index numbering
-+       *
-+       * Bits:
-+       *
-+       * 31-24: ADC Sense 3
-+       * 23-16: ADC Sense 2
-+       * 15-8 : ADC Sense 1
-+       * 7-0  : ADC Sense 0
-+       */
-+      value = LVTS_TSSEL_CONF;
-+      writel(value, LVTS_TSSEL(lvts_ctrl->base));
-+
-+      /*
-+       * LVTS_CALSCALE : ADC voltage round
-+       */
-+      value = 0x300;
-+      value = LVTS_CALSCALE_CONF;
-+
-+      /*
-+       * LVTS_MSRCTL0 : Sensor filtering strategy
-+       *
-+       * Filters:
-+       *
-+       * 000 : One sample
-+       * 001 : Avg 2 samples
-+       * 010 : 4 samples, drop min and max, avg 2 samples
-+       * 011 : 6 samples, drop min and max, avg 4 samples
-+       * 100 : 10 samples, drop min and max, avg 8 samples
-+       * 101 : 18 samples, drop min and max, avg 16 samples
-+       *
-+       * Bits:
-+       *
-+       * 0-2  : Sensor0 filter
-+       * 3-5  : Sensor1 filter
-+       * 6-8  : Sensor2 filter
-+       * 9-11 : Sensor3 filter
-+       */
-+      value = LVTS_HW_FILTER << 9 |  LVTS_HW_FILTER << 6 |
-+                      LVTS_HW_FILTER << 3 | LVTS_HW_FILTER;
-+      writel(value, LVTS_MSRCTL0(lvts_ctrl->base));
-+
-+      /*
-+       * LVTS_MSRCTL1 : Measurement control
-+       *
-+       * Bits:
-+       *
-+       * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
-+       * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
-+       * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
-+       * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
-+       *
-+       * That configuration will ignore the filtering and the delays
-+       * introduced below in MONCTL1 and MONCTL2
-+       */
-+      if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
-+              value = BIT(9) | BIT(6) | BIT(5) | BIT(4);
-+              writel(value, LVTS_MSRCTL1(lvts_ctrl->base));
-+      }
-+
-+      /*
-+       * LVTS_MONCTL1 : Period unit and group interval configuration
-+       *
-+       * The clock source of LVTS thermal controller is 26MHz.
-+       *
-+       * The period unit is a time base for all the interval delays
-+       * specified in the registers. By default we use 12. The time
-+       * conversion is done by multiplying by 256 and 1/26.10^6
-+       *
-+       * An interval delay multiplied by the period unit gives the
-+       * duration in seconds.
-+       *
-+       * - Filter interval delay is a delay between two samples of
-+       * the same sensor.
-+       *
-+       * - Sensor interval delay is a delay between two samples of
-+       * different sensors.
-+       *
-+       * - Group interval delay is a delay between different rounds.
-+       *
-+       * For example:
-+       *     If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1,
-+       *     and two sensors, TS1 and TS2, are in a LVTS thermal controller
-+       *     and then
-+       *     Period unit time = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us
-+       *     Filter interval delay = 1 * Period unit = 118.149us
-+       *     Sensor interval delay = 2 * Period unit = 236.298us
-+       *     Group interval delay = 1 * Period unit = 118.149us
-+       *
-+       *     TS1    TS1 ... TS1    TS2    TS2 ... TS2    TS1...
-+       *        <--> Filter interval delay
-+       *                       <--> Sensor interval delay
-+       *                                             <--> Group interval delay
-+       * Bits:
-+       *      29 - 20 : Group interval
-+       *      16 - 13 : Send a single interrupt when crossing the hot threshold (1)
-+       *                or an interrupt everytime the hot threshold is crossed (0)
-+       *       9 - 0  : Period unit
-+       *
-+       */
-+      value = LVTS_GROUP_INTERVAL << 20 | LVTS_PERIOD_UNIT;
-+      writel(value, LVTS_MONCTL1(lvts_ctrl->base));
-+
-+      /*
-+       * LVTS_MONCTL2 : Filtering and sensor interval
-+       *
-+       * Bits:
-+       *
-+       *      25-16 : Interval unit in PERIOD_UNIT between sample on
-+       *              the same sensor, filter interval
-+       *       9-0  : Interval unit in PERIOD_UNIT between each sensor
-+       *
-+       */
-+      value = LVTS_FILTER_INTERVAL << 16 | LVTS_SENSOR_INTERVAL;
-+      writel(value, LVTS_MONCTL2(lvts_ctrl->base));
-+
-+      return lvts_irq_init(lvts_ctrl);
-+}
-+
-+static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+      struct lvts_sensor *lvts_sensors = lvts_ctrl->sensors;
-+      struct thermal_zone_device *tz;
-+      u32 sensor_map = 0;
-+      int i;
-+
-+      for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
-+
-+              int dt_id = lvts_sensors[i].dt_id;
-+
-+              tz = devm_thermal_of_zone_register(dev, dt_id, &lvts_sensors[i],
-+                                                 &lvts_ops);
-+              if (IS_ERR(tz)) {
-+                      /*
-+                       * This thermal zone is not described in the
-+                       * device tree. It is not an error from the
-+                       * thermal OF code POV, we just continue.
-+                       */
-+                      if (PTR_ERR(tz) == -ENODEV)
-+                              continue;
-+
-+                      return PTR_ERR(tz);
-+              }
-+
-+              /*
-+               * The thermal zone pointer will be needed in the
-+               * interrupt handler, we store it in the sensor
-+               * structure. The thermal domain structure will be
-+               * passed to the interrupt handler private data as the
-+               * interrupt is shared for all the controller
-+               * belonging to the thermal domain.
-+               */
-+              lvts_sensors[i].tz = tz;
-+
-+              /*
-+               * This sensor was correctly associated with a thermal
-+               * zone, let's set the corresponding bit in the sensor
-+               * map, so we can enable the temperature monitoring in
-+               * the hardware thermal controller.
-+               */
-+              sensor_map |= BIT(i);
-+      }
-+
-+      /*
-+       * Bits:
-+       *      9: Single point access flow
-+       *    0-3: Enable sensing point 0-3
-+       *
-+       * The initialization of the thermal zones give us
-+       * which sensor point to enable. If any thermal zone
-+       * was not described in the device tree, it won't be
-+       * enabled here in the sensor map.
-+       */
-+      writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+
-+      return 0;
-+}
-+
-+static int lvts_domain_init(struct device *dev, struct lvts_domain *lvts_td,
-+                                      const struct lvts_data *lvts_data)
-+{
-+      struct lvts_ctrl *lvts_ctrl;
-+      int i, ret;
-+
-+      ret = lvts_ctrl_init(dev, lvts_td, lvts_data);
-+      if (ret)
-+              return ret;
-+
-+      ret = lvts_domain_reset(dev, lvts_td->reset);
-+      if (ret) {
-+              dev_dbg(dev, "Failed to reset domain");
-+              return ret;
-+      }
-+
-+      for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+              lvts_ctrl = &lvts_td->lvts_ctrl[i];
-+
-+              /*
-+               * Initialization steps:
-+               *
-+               * - Enable the clock
-+               * - Connect to the LVTS
-+               * - Initialize the LVTS
-+               * - Prepare the calibration data
-+               * - Select monitored sensors
-+               * [ Configure sampling ]
-+               * [ Configure the interrupt ]
-+               * - Start measurement
-+               */
-+              ret = lvts_ctrl_set_enable(lvts_ctrl, true);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to enable LVTS clock");
-+                      return ret;
-+              }
-+
-+              ret = lvts_ctrl_connect(dev, lvts_ctrl);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to connect to LVTS controller");
-+                      return ret;
-+              }
-+
-+              ret = lvts_ctrl_initialize(dev, lvts_ctrl);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to initialize controller");
-+                      return ret;
-+              }
-+
-+              ret = lvts_ctrl_calibrate(dev, lvts_ctrl);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to calibrate controller");
-+                      return ret;
-+              }
-+
-+              ret = lvts_ctrl_configure(dev, lvts_ctrl);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to configure controller");
-+                      return ret;
-+              }
-+
-+              ret = lvts_ctrl_start(dev, lvts_ctrl);
-+              if (ret) {
-+                      dev_dbg(dev, "Failed to start controller");
-+                      return ret;
-+              }
-+      }
-+
-+      return lvts_debugfs_init(dev, lvts_td);
-+}
-+
-+static int lvts_probe(struct platform_device *pdev)
-+{
-+      const struct lvts_data *lvts_data;
-+      struct lvts_domain *lvts_td;
-+      struct device *dev = &pdev->dev;
-+      struct resource *res;
-+      int irq, ret;
-+
-+      lvts_td = devm_kzalloc(dev, sizeof(*lvts_td), GFP_KERNEL);
-+      if (!lvts_td)
-+              return -ENOMEM;
-+
-+      lvts_data = of_device_get_match_data(dev);
-+
-+      lvts_td->clk = devm_clk_get_enabled(dev, NULL);
-+      if (IS_ERR(lvts_td->clk))
-+              return dev_err_probe(dev, PTR_ERR(lvts_td->clk), "Failed to retrieve clock\n");
-+
-+      res = platform_get_mem_or_io(pdev, 0);
-+      if (!res)
-+              return dev_err_probe(dev, (-ENXIO), "No IO resource\n");
-+
-+      lvts_td->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-+      if (IS_ERR(lvts_td->base))
-+              return dev_err_probe(dev, PTR_ERR(lvts_td->base), "Failed to map io resource\n");
-+
-+      lvts_td->reset = devm_reset_control_get_by_index(dev, 0);
-+      if (IS_ERR(lvts_td->reset))
-+              return dev_err_probe(dev, PTR_ERR(lvts_td->reset), "Failed to get reset control\n");
-+
-+      irq = platform_get_irq(pdev, 0);
-+      if (irq < 0)
-+              return dev_err_probe(dev, irq, "No irq resource\n");
-+
-+      ret = lvts_domain_init(dev, lvts_td, lvts_data);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
-+
-+      /*
-+       * At this point the LVTS is initialized and enabled. We can
-+       * safely enable the interrupt.
-+       */
-+      ret = devm_request_threaded_irq(dev, irq, NULL, lvts_irq_handler,
-+                                      IRQF_ONESHOT, dev_name(dev), lvts_td);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Failed to request interrupt\n");
-+
-+      platform_set_drvdata(pdev, lvts_td);
-+
-+      return 0;
-+}
-+
-+static int lvts_remove(struct platform_device *pdev)
-+{
-+      struct lvts_domain *lvts_td;
-+      int i;
-+
-+      lvts_td = platform_get_drvdata(pdev);
-+
-+      for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
-+              lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
-+
-+      lvts_debugfs_exit(lvts_td);
-+
-+      return 0;
-+}
-+
-+static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
-+      {
-+              .cal_offset = { 0x04, 0x07 },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_MCU_BIG_CPU0 },
-+                      { .dt_id = MT8195_MCU_BIG_CPU1 }
-+              },
-+              .num_lvts_sensor = 2,
-+              .offset = 0x0,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      },
-+      {
-+              .cal_offset = { 0x0d, 0x10 },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_MCU_BIG_CPU2 },
-+                      { .dt_id = MT8195_MCU_BIG_CPU3 }
-+              },
-+              .num_lvts_sensor = 2,
-+              .offset = 0x100,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      },
-+      {
-+              .cal_offset = { 0x16, 0x19, 0x1c, 0x1f },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_MCU_LITTLE_CPU0 },
-+                      { .dt_id = MT8195_MCU_LITTLE_CPU1 },
-+                      { .dt_id = MT8195_MCU_LITTLE_CPU2 },
-+                      { .dt_id = MT8195_MCU_LITTLE_CPU3 }
-+              },
-+              .num_lvts_sensor = 4,
-+              .offset = 0x200,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      }
-+};
-+
-+static const struct lvts_data mt8195_lvts_mcu_data = {
-+      .lvts_ctrl      = mt8195_lvts_data_ctrl,
-+      .num_lvts_ctrl  = ARRAY_SIZE(mt8195_lvts_data_ctrl),
-+};
-+
-+static const struct of_device_id lvts_of_match[] = {
-+      { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, lvts_of_match);
-+
-+static struct platform_driver lvts_driver = {
-+      .probe = lvts_probe,
-+      .remove = lvts_remove,
-+      .driver = {
-+              .name = "mtk-lvts-thermal",
-+              .of_match_table = lvts_of_match,
-+      },
-+};
-+module_platform_driver(lvts_driver);
-+
-+MODULE_AUTHOR("Balsam CHIHI <bchihi@baylibre.com>");
-+MODULE_DESCRIPTION("MediaTek LVTS Thermal Driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch b/target/linux/mediatek/patches-6.6/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch
deleted file mode 100644 (file)
index b6a5f64..0000000
+++ /dev/null
@@ -1,186 +0,0 @@
-From 498e2f7a6e69dcbca24715de2b4b97569fdfeff4 Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:24 +0100
-Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controllers
-
-Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- .../thermal/mediatek,lvts-thermal.yaml        | 142 ++++++++++++++++++
- .../thermal/mediatek,lvts-thermal.h           |  19 +++
- 2 files changed, 161 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
- create mode 100644 include/dt-bindings/thermal/mediatek,lvts-thermal.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
-@@ -0,0 +1,142 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
-+
-+maintainers:
-+  - Balsam CHIHI <bchihi@baylibre.com>
-+
-+description: |
-+  LVTS is a thermal management architecture composed of three subsystems,
-+  a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
-+  a Converter - Low Voltage Thermal Sensor converter (LVTS), and
-+  a Digital controller (LVTS_CTRL).
-+
-+properties:
-+  compatible:
-+    enum:
-+      - mediatek,mt8192-lvts-ap
-+      - mediatek,mt8192-lvts-mcu
-+      - mediatek,mt8195-lvts-ap
-+      - mediatek,mt8195-lvts-mcu
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    maxItems: 1
-+
-+  clocks:
-+    maxItems: 1
-+
-+  resets:
-+    maxItems: 1
-+    description: LVTS reset for clearing temporary data on AP/MCU.
-+
-+  nvmem-cells:
-+    minItems: 1
-+    items:
-+      - description: Calibration eFuse data 1 for LVTS
-+      - description: Calibration eFuse data 2 for LVTS
-+
-+  nvmem-cell-names:
-+    minItems: 1
-+    items:
-+      - const: lvts-calib-data-1
-+      - const: lvts-calib-data-2
-+
-+  "#thermal-sensor-cells":
-+    const: 1
-+
-+allOf:
-+  - $ref: thermal-sensor.yaml#
-+
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            enum:
-+              - mediatek,mt8192-lvts-ap
-+              - mediatek,mt8192-lvts-mcu
-+    then:
-+      properties:
-+        nvmem-cells:
-+          maxItems: 1
-+
-+        nvmem-cell-names:
-+          maxItems: 1
-+
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            enum:
-+              - mediatek,mt8195-lvts-ap
-+              - mediatek,mt8195-lvts-mcu
-+    then:
-+      properties:
-+        nvmem-cells:
-+          minItems: 2
-+
-+        nvmem-cell-names:
-+          minItems: 2
-+
-+required:
-+  - compatible
-+  - reg
-+  - interrupts
-+  - clocks
-+  - resets
-+  - nvmem-cells
-+  - nvmem-cell-names
-+  - "#thermal-sensor-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+    #include <dt-bindings/clock/mt8195-clk.h>
-+    #include <dt-bindings/reset/mt8195-resets.h>
-+    #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-+
-+    soc {
-+      #address-cells = <2>;
-+      #size-cells = <2>;
-+
-+      lvts_mcu: thermal-sensor@11278000 {
-+        compatible = "mediatek,mt8195-lvts-mcu";
-+        reg = <0 0x11278000 0 0x1000>;
-+        interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
-+        clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
-+        resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
-+        nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
-+        nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
-+        #thermal-sensor-cells = <1>;
-+      };
-+    };
-+
-+    thermal_zones: thermal-zones {
-+      cpu0-thermal {
-+        polling-delay = <1000>;
-+        polling-delay-passive = <250>;
-+        thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
-+
-+        trips {
-+          cpu0_alert: trip-alert {
-+            temperature = <85000>;
-+            hysteresis = <2000>;
-+            type = "passive";
-+          };
-+
-+          cpu0_crit: trip-crit {
-+            temperature = <100000>;
-+            hysteresis = <2000>;
-+            type = "critical";
-+          };
-+        };
-+      };
-+    };
---- /dev/null
-+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-@@ -0,0 +1,19 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-+/*
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Author: Balsam CHIHI <bchihi@baylibre.com>
-+ */
-+
-+#ifndef __MEDIATEK_LVTS_DT_H
-+#define __MEDIATEK_LVTS_DT_H
-+
-+#define MT8195_MCU_BIG_CPU0     0
-+#define MT8195_MCU_BIG_CPU1     1
-+#define MT8195_MCU_BIG_CPU2     2
-+#define MT8195_MCU_BIG_CPU3     3
-+#define MT8195_MCU_LITTLE_CPU0  4
-+#define MT8195_MCU_LITTLE_CPU1  5
-+#define MT8195_MCU_LITTLE_CPU2  6
-+#define MT8195_MCU_LITTLE_CPU3  7
-+
-+#endif /* __MEDIATEK_LVTS_DT_H */
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch b/target/linux/mediatek/patches-6.6/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch
deleted file mode 100644 (file)
index efb0d8b..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From 05aaa7fdb0736262e224369b9b9f1410320fc71b Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Tue, 7 Mar 2023 16:45:21 +0100
-Subject: [PATCH] dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal
- controllers for mt8195
-
-Add AP Domain to LVTS thermal controllers dt-binding definition for mt8195.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230307154524.118541-2-bchihi@baylibre.com
----
- include/dt-bindings/thermal/mediatek,lvts-thermal.h | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-@@ -16,4 +16,14 @@
- #define MT8195_MCU_LITTLE_CPU2  6
- #define MT8195_MCU_LITTLE_CPU3  7
-+#define MT8195_AP_VPU0  8
-+#define MT8195_AP_VPU1  9
-+#define MT8195_AP_GPU0  10
-+#define MT8195_AP_GPU1  11
-+#define MT8195_AP_VDEC  12
-+#define MT8195_AP_IMG   13
-+#define MT8195_AP_INFRA 14
-+#define MT8195_AP_CAM0  15
-+#define MT8195_AP_CAM1  16
-+
- #endif /* __MEDIATEK_LVTS_DT_H */
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch b/target/linux/mediatek/patches-6.6/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch
deleted file mode 100644 (file)
index c689693..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a6ff3c0021468721b96e84892a8cae24bde8d65f Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:29 +0100
-Subject: [PATCH] thermal/core: Add a thermal zone 'devdata' accessor
-
-The thermal zone device structure is exposed to the different drivers
-and obviously they access the internals while that should be
-restricted to the core thermal code.
-
-In order to self-encapsulate the thermal core code, we need to prevent
-the drivers accessing directly the thermal zone structure and provide
-accessor functions to deal with.
-
-Provide an accessor to the 'devdata' structure and make use of it in
-the different drivers.
-
-No functional changes intended.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/thermal_core.c | 6 ++++++
- include/linux/thermal.h        | 7 +++++++
- 2 files changed, 13 insertions(+)
-
---- a/drivers/thermal/thermal_core.c
-+++ b/drivers/thermal/thermal_core.c
-@@ -1346,6 +1346,12 @@ struct thermal_zone_device *thermal_zone
- }
- EXPORT_SYMBOL_GPL(thermal_zone_device_register);
-+void *thermal_zone_device_priv(struct thermal_zone_device *tzd)
-+{
-+      return tzd->devdata;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_device_priv);
-+
- /**
-  * thermal_zone_device_unregister - removes the registered thermal zone device
-  * @tz: the thermal zone device to remove
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -346,6 +346,8 @@ thermal_zone_device_register_with_trips(
-                                       void *, struct thermal_zone_device_ops *,
-                                       struct thermal_zone_params *, int, int);
-+void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
-+
- int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
-                                    struct thermal_cooling_device *,
-                                    unsigned long, unsigned long,
-@@ -417,6 +419,11 @@ static inline int thermal_zone_get_offse
-               struct thermal_zone_device *tz)
- { return -ENODEV; }
-+static inline void *thermal_zone_device_priv(struct thermal_zone_device *tz)
-+{
-+      return NULL;
-+}
-+
- static inline int thermal_zone_device_enable(struct thermal_zone_device *tz)
- { return -ENODEV; }
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch
deleted file mode 100644 (file)
index 66d3c9e..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 072e35c98806100182c0a7263cf4cba09ce43463 Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:38 +0100
-Subject: [PATCH] thermal/core: Add thermal_zone_device structure 'type'
- accessor
-
-The thermal zone device structure is exposed via the exported
-thermal.h header. This structure should stay private the thermal core
-code. In order to encapsulate the structure, let's add an accessor to
-get the 'type' of the thermal zone.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/thermal_core.c | 6 ++++++
- include/linux/thermal.h        | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/thermal/thermal_core.c
-+++ b/drivers/thermal/thermal_core.c
-@@ -1352,6 +1352,12 @@ void *thermal_zone_device_priv(struct th
- }
- EXPORT_SYMBOL_GPL(thermal_zone_device_priv);
-+const char *thermal_zone_device_type(struct thermal_zone_device *tzd)
-+{
-+      return tzd->type;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_device_type);
-+
- /**
-  * thermal_zone_device_unregister - removes the registered thermal zone device
-  * @tz: the thermal zone device to remove
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -347,6 +347,7 @@ thermal_zone_device_register_with_trips(
-                                       struct thermal_zone_params *, int, int);
- void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
-+const char *thermal_zone_device_type(struct thermal_zone_device *tzd);
- int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
-                                    struct thermal_cooling_device *,
-@@ -423,6 +424,11 @@ static inline void *thermal_zone_device_
- {
-       return NULL;
- }
-+
-+static inline const char *thermal_zone_device_type(struct thermal_zone_device *tzd)
-+{
-+      return NULL;
-+}
- static inline int thermal_zone_device_enable(struct thermal_zone_device *tz)
- { return -ENODEV; }
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch b/target/linux/mediatek/patches-6.6/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch
deleted file mode 100644 (file)
index 57bc910..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 7d78bab533eb9aa0e5240e25a204e8f416723ed6 Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:30 +0100
-Subject: [PATCH 07/42] thermal/core: Use the thermal zone 'devdata' accessor
- in thermal located drivers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The thermal zone device structure is exposed to the different drivers
-and obviously they access the internals while that should be
-restricted to the core thermal code.
-
-In order to self-encapsulate the thermal core code, we need to prevent
-the drivers accessing directly the thermal zone structure and provide
-accessor functions to deal with.
-
-Use the devdata accessor introduced in the previous patch.
-
-No functional changes intended.
-
-[skipped drivers not relevant for mediatek target]
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
-Acked-by: Mark Brown <broonie@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts
-Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts
-Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062
-Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>  #spread
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
-Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
-Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap
-Acked-by: Linus Walleij <linus.walleij@linaro.org>
-Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
-Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/auxadc_thermal.c           |  2 +-
- drivers/thermal/mediatek/lvts_thermal.c             |  4 ++--
- 43 files changed, 71 insertions(+), 73 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -763,7 +763,7 @@ static int mtk_thermal_bank_temperature(
- static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
- {
--      struct mtk_thermal *mt = tz->devdata;
-+      struct mtk_thermal *mt = thermal_zone_device_priv(tz);
-       int i;
-       int tempmax = INT_MIN;
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -252,7 +252,7 @@ static u32 lvts_temp_to_raw(int temperat
- static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
- {
--      struct lvts_sensor *lvts_sensor = tz->devdata;
-+      struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-       void __iomem *msr = lvts_sensor->msr;
-       u32 value;
-@@ -290,7 +290,7 @@ static int lvts_get_temp(struct thermal_
- static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
- {
--      struct lvts_sensor *lvts_sensor = tz->devdata;
-+      struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-       void __iomem *base = lvts_sensor->base;
-       u32 raw_low = lvts_temp_to_raw(low);
-       u32 raw_high = lvts_temp_to_raw(high);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch b/target/linux/mediatek/patches-6.6/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch
deleted file mode 100644 (file)
index 647b3b0..0000000
+++ /dev/null
@@ -1,201 +0,0 @@
-From cc9c60e9cfeeac45d63361fa8c085c43c4bdfe3a Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:36 +0100
-Subject: [PATCH 08/42] thermal/hwmon: Use the right device for
- devm_thermal_add_hwmon_sysfs()
-
-The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
-zone structure pointer as parameter.
-
-Actually, it uses the tz->device to add it in the devres list.
-
-It is preferable to use the device registering the thermal zone
-instead of the thermal zone device itself. That prevents the driver
-accessing the thermal zone structure internals and it is from my POV
-more correct regarding how devm_ is used.
-
-[skipped imx thermal which did not apply cleanly and irrelevant on
-mediatek target]
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/amlogic_thermal.c                  | 2 +-
- drivers/thermal/imx_sc_thermal.c                   | 2 +-
- drivers/thermal/k3_bandgap.c                       | 2 +-
- drivers/thermal/mediatek/auxadc_thermal.c          | 2 +-
- drivers/thermal/qcom/qcom-spmi-adc-tm5.c           | 2 +-
- drivers/thermal/qcom/qcom-spmi-temp-alarm.c        | 2 +-
- drivers/thermal/qcom/tsens.c                       | 2 +-
- drivers/thermal/qoriq_thermal.c                    | 2 +-
- drivers/thermal/sun8i_thermal.c                    | 2 +-
- drivers/thermal/tegra/tegra30-tsensor.c            | 2 +-
- drivers/thermal/thermal_hwmon.c                    | 4 ++--
- drivers/thermal/thermal_hwmon.h                    | 4 ++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 13 files changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/thermal/amlogic_thermal.c
-+++ b/drivers/thermal/amlogic_thermal.c
-@@ -286,7 +286,7 @@ static int amlogic_thermal_probe(struct
-               return ret;
-       }
--      if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
-+      if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd))
-               dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
-       ret = amlogic_thermal_initialize(pdata);
---- a/drivers/thermal/imx_sc_thermal.c
-+++ b/drivers/thermal/imx_sc_thermal.c
-@@ -120,7 +120,7 @@ static int imx_sc_thermal_probe(struct p
-                       return ret;
-               }
--              if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
-+              if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd))
-                       dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
-       }
---- a/drivers/thermal/k3_bandgap.c
-+++ b/drivers/thermal/k3_bandgap.c
-@@ -222,7 +222,7 @@ static int k3_bandgap_probe(struct platf
-                       goto err_alloc;
-               }
--              if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
-+              if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd))
-                       dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
-       }
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1210,7 +1210,7 @@ static int mtk_thermal_probe(struct plat
-               goto err_disable_clk_peri_therm;
-       }
--      ret = devm_thermal_add_hwmon_sysfs(tzdev);
-+      ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
-       if (ret)
-               dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
---- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
-+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
-@@ -688,7 +688,7 @@ static int adc_tm5_register_tzd(struct a
-                       return PTR_ERR(tzd);
-               }
-               adc_tm->channels[i].tzd = tzd;
--              if (devm_thermal_add_hwmon_sysfs(tzd))
-+              if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
-                       dev_warn(adc_tm->dev,
-                                "Failed to add hwmon sysfs attributes\n");
-       }
---- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
-+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
-@@ -460,7 +460,7 @@ static int qpnp_tm_probe(struct platform
-               return ret;
-       }
--      if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
-+      if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
-               dev_warn(&pdev->dev,
-                        "Failed to add hwmon sysfs attributes\n");
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -1056,7 +1056,7 @@ static int tsens_register(struct tsens_p
-               if (priv->ops->enable)
-                       priv->ops->enable(priv, i);
--              if (devm_thermal_add_hwmon_sysfs(tzd))
-+              if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
-                       dev_warn(priv->dev,
-                                "Failed to add hwmon sysfs attributes\n");
-       }
---- a/drivers/thermal/qoriq_thermal.c
-+++ b/drivers/thermal/qoriq_thermal.c
-@@ -158,7 +158,7 @@ static int qoriq_tmu_register_tmu_zone(s
-                       return ret;
-               }
--              if (devm_thermal_add_hwmon_sysfs(tzd))
-+              if (devm_thermal_add_hwmon_sysfs(dev, tzd))
-                       dev_warn(dev,
-                                "Failed to add hwmon sysfs attributes\n");
---- a/drivers/thermal/sun8i_thermal.c
-+++ b/drivers/thermal/sun8i_thermal.c
-@@ -468,7 +468,7 @@ static int sun8i_ths_register(struct ths
-               if (IS_ERR(tmdev->sensor[i].tzd))
-                       return PTR_ERR(tmdev->sensor[i].tzd);
--              if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
-+              if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd))
-                       dev_warn(tmdev->dev,
-                                "Failed to add hwmon sysfs attributes\n");
-       }
---- a/drivers/thermal/tegra/tegra30-tsensor.c
-+++ b/drivers/thermal/tegra/tegra30-tsensor.c
-@@ -530,7 +530,7 @@ static int tegra_tsensor_register_channe
-               return 0;
-       }
--      if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
-+      if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd))
-               dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
-       return 0;
---- a/drivers/thermal/thermal_hwmon.c
-+++ b/drivers/thermal/thermal_hwmon.c
-@@ -255,7 +255,7 @@ static void devm_thermal_hwmon_release(s
-       thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
- }
--int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
-+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
- {
-       struct thermal_zone_device **ptr;
-       int ret;
-@@ -272,7 +272,7 @@ int devm_thermal_add_hwmon_sysfs(struct
-       }
-       *ptr = tz;
--      devres_add(&tz->device, ptr);
-+      devres_add(dev, ptr);
-       return ret;
- }
---- a/drivers/thermal/thermal_hwmon.h
-+++ b/drivers/thermal/thermal_hwmon.h
-@@ -17,7 +17,7 @@
- #ifdef CONFIG_THERMAL_HWMON
- int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
--int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
-+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz);
- void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
- #else
- static inline int
-@@ -27,7 +27,7 @@ thermal_add_hwmon_sysfs(struct thermal_z
- }
- static inline int
--devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
-+devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
- {
-       return 0;
- }
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -182,7 +182,7 @@ int ti_thermal_expose_sensor(struct ti_b
-       ti_bandgap_set_sensor_data(bgp, id, data);
-       ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
--      if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
-+      if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
-               dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
-       return 0;
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch b/target/linux/mediatek/patches-6.6/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch
deleted file mode 100644 (file)
index 9dedc2c..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-From 5a72b8e4bac753e4dc74dc0a1335d120f63df97a Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:37 +0100
-Subject: [PATCH 09/42] thermal: Don't use 'device' internal thermal zone
- structure field
-
-Some drivers are directly using the thermal zone's 'device' structure
-field.
-
-Use the driver device pointer instead of the thermal zone device when
-it is available.
-
-Remove the traces when they are duplicate with the traces in the core
-code.
-
-[again skipped imx_thermal.c]
-
-Cc: Jean Delvare <jdelvare@suse.com>
-Cc: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek LVTS
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/lvts_thermal.c            | 4 ++--
- drivers/thermal/thermal_hwmon.c                    | 4 ++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 3 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -305,7 +305,7 @@ static int lvts_set_trips(struct thermal
-        * 14-0 : Raw temperature for threshold
-        */
-       if (low != -INT_MAX) {
--              dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low);
-+              pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low);
-               writel(raw_low, LVTS_H2NTHRE(base));
-       }
-@@ -318,7 +318,7 @@ static int lvts_set_trips(struct thermal
-        *
-        * 14-0 : Raw temperature for threshold
-        */
--      dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high);
-+      pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high);
-       writel(raw_high, LVTS_HTHRE(base));
-       return 0;
---- a/drivers/thermal/thermal_hwmon.c
-+++ b/drivers/thermal/thermal_hwmon.c
-@@ -220,14 +220,14 @@ void thermal_remove_hwmon_sysfs(struct t
-       hwmon = thermal_hwmon_lookup_by_type(tz);
-       if (unlikely(!hwmon)) {
-               /* Should never happen... */
--              dev_dbg(&tz->device, "hwmon device lookup failed!\n");
-+              dev_dbg(hwmon->device, "hwmon device lookup failed!\n");
-               return;
-       }
-       temp = thermal_hwmon_lookup_temp(hwmon, tz);
-       if (unlikely(!temp)) {
-               /* Should never happen... */
--              dev_dbg(&tz->device, "temperature input lookup failed!\n");
-+              dev_dbg(hwmon->device, "temperature input lookup failed!\n");
-               return;
-       }
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -43,7 +43,7 @@ static void ti_thermal_work(struct work_
-       thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
--      dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
-+      dev_dbg(data->bgp->dev, "updated thermal zone %s\n",
-               data->ti_thermal->type);
- }
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch b/target/linux/mediatek/patches-6.6/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch
deleted file mode 100644 (file)
index 8cec9ab..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 66b3a292d3fc749e8ec7ac5278a17e8a5757ecbc Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:41 +0100
-Subject: [PATCH 10/42] thermal: Use thermal_zone_device_type() accessor
-
-Replace the accesses to 'tz->type' by its accessor version in order to
-self-encapsulate the thermal_zone_device structure.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 2 +-
- drivers/thermal/mediatek/lvts_thermal.c            | 6 ++++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 3 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
-+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
-@@ -168,7 +168,7 @@ mlxsw_thermal_module_trips_update(struct
-       if (crit_temp > emerg_temp) {
-               dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n",
--                       tz->tzdev->type, crit_temp, emerg_temp);
-+                       thermal_zone_device_type(tz->tzdev), crit_temp, emerg_temp);
-               return 0;
-       }
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -305,7 +305,8 @@ static int lvts_set_trips(struct thermal
-        * 14-0 : Raw temperature for threshold
-        */
-       if (low != -INT_MAX) {
--              pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low);
-+              pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-+                       thermal_zone_device_type(tz), low);
-               writel(raw_low, LVTS_H2NTHRE(base));
-       }
-@@ -318,7 +319,8 @@ static int lvts_set_trips(struct thermal
-        *
-        * 14-0 : Raw temperature for threshold
-        */
--      pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high);
-+      pr_debug("%s: Setting high limit temperature interrupt: %d\n",
-+               thermal_zone_device_type(tz), high);
-       writel(raw_high, LVTS_HTHRE(base));
-       return 0;
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -44,7 +44,7 @@ static void ti_thermal_work(struct work_
-       thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
-       dev_dbg(data->bgp->dev, "updated thermal zone %s\n",
--              data->ti_thermal->type);
-+              thermal_zone_device_type(data->ti_thermal));
- }
- /**
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch b/target/linux/mediatek/patches-6.6/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch
deleted file mode 100644 (file)
index 68f41fd..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-From f6658c1c4ae98477d6be00495226c0617354fe76 Mon Sep 17 00:00:00 2001
-From: Markus Schneider-Pargmann <msp@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:43 +0100
-Subject: [PATCH 11/42] thermal/drivers/mediatek: Control buffer enablement
- tweaks
-
-Add logic in order to be able to turn on the control buffer on MT8365.
-This change now allows to have control buffer support for MTK_THERMAL_V1,
-and it allows to define the register offset, and mask used to enable it.
-
-Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Signed-off-by: Fabien Parent <fparent@baylibre.com>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 28 +++++++++++++++--------
- 1 file changed, 19 insertions(+), 9 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -307,6 +307,9 @@ struct mtk_thermal_data {
-       bool need_switch_bank;
-       struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
-       enum mtk_thermal_version version;
-+      u32 apmixed_buffer_ctl_reg;
-+      u32 apmixed_buffer_ctl_mask;
-+      u32 apmixed_buffer_ctl_set;
- };
- struct mtk_thermal {
-@@ -560,6 +563,9 @@ static const struct mtk_thermal_data mt7
-       .adcpnp = mt7622_adcpnp,
-       .sensor_mux_values = mt7622_mux_values,
-       .version = MTK_THERMAL_V2,
-+      .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
-+      .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
-+      .apmixed_buffer_ctl_set = BIT(0),
- };
- /*
-@@ -1079,14 +1085,18 @@ static const struct of_device_id mtk_the
- };
- MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
--static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
-+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
-+                                     void __iomem *apmixed_base)
- {
--      int tmp;
-+      u32 tmp;
-+
-+      if (!mt->conf->apmixed_buffer_ctl_reg)
-+              return;
--      tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
--      tmp &= ~(0x37);
--      tmp |= 0x1;
--      writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
-+      tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
-+      tmp &= mt->conf->apmixed_buffer_ctl_mask;
-+      tmp |= mt->conf->apmixed_buffer_ctl_set;
-+      writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
-       udelay(200);
- }
-@@ -1184,10 +1194,10 @@ static int mtk_thermal_probe(struct plat
-               goto err_disable_clk_auxadc;
-       }
--      if (mt->conf->version != MTK_THERMAL_V1) {
--              mtk_thermal_turn_on_buffer(apmixed_base);
-+      mtk_thermal_turn_on_buffer(mt, apmixed_base);
-+
-+      if (mt->conf->version != MTK_THERMAL_V2)
-               mtk_thermal_release_periodic_ts(mt, auxadc_base);
--      }
-       if (mt->conf->version == MTK_THERMAL_V1)
-               mt->raw_to_mcelsius = raw_to_mcelsius_v1;
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch b/target/linux/mediatek/patches-6.6/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch
deleted file mode 100644 (file)
index 285c6f6..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
-From c4eff784465f88218dc5eb51320320464db83d3f Mon Sep 17 00:00:00 2001
-From: Fabien Parent <fparent@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:44 +0100
-Subject: [PATCH 12/42] thermal/drivers/mediatek: Add support for MT8365 SoC
-
-MT8365 is similar to the other SoCs supported by the driver. It has only
-one bank and 3 actual sensors that can be multiplexed. There is another
-one sensor that does not have usable data.
-
-Signed-off-by: Fabien Parent <fparent@baylibre.com>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -31,6 +31,7 @@
- #define AUXADC_CON2_V         0x010
- #define AUXADC_DATA(channel)  (0x14 + (channel) * 4)
-+#define APMIXED_SYS_TS_CON0   0x600
- #define APMIXED_SYS_TS_CON1   0x604
- /* Thermal Controller Registers */
-@@ -281,6 +282,17 @@ enum mtk_thermal_version {
- /* The calibration coefficient of sensor  */
- #define MT7986_CALIBRATION            165
-+/* MT8365 */
-+#define MT8365_TEMP_AUXADC_CHANNEL 11
-+#define MT8365_CALIBRATION 164
-+#define MT8365_NUM_CONTROLLER 1
-+#define MT8365_NUM_BANKS 1
-+#define MT8365_NUM_SENSORS 3
-+#define MT8365_NUM_SENSORS_PER_ZONE 3
-+#define MT8365_TS1 0
-+#define MT8365_TS2 1
-+#define MT8365_TS3 2
-+
- struct mtk_thermal;
- struct thermal_bank_cfg {
-@@ -435,6 +447,24 @@ static const int mt7986_mux_values[MT798
- static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
- static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-+/* MT8365 thermal sensor data */
-+static const int mt8365_bank_data[MT8365_NUM_SENSORS] = {
-+      MT8365_TS1, MT8365_TS2, MT8365_TS3
-+};
-+
-+static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
-+};
-+
-+static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = {
-+      TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
-+};
-+
-+static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 };
-+static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 };
-+
-+static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 };
-+
- /*
-  * The MT8173 thermal controller has four banks. Each bank can read up to
-  * four temperature sensors simultaneously. The MT8173 has a total of 5
-@@ -510,6 +540,40 @@ static const struct mtk_thermal_data mt2
- };
- /*
-+ * The MT8365 thermal controller has one bank, which can read up to
-+ * four temperature sensors simultaneously. The MT8365 has a total of 3
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt8365_thermal_data = {
-+      .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL,
-+      .num_banks = MT8365_NUM_BANKS,
-+      .num_sensors = MT8365_NUM_SENSORS,
-+      .vts_index = mt8365_vts_index,
-+      .cali_val = MT8365_CALIBRATION,
-+      .num_controller = MT8365_NUM_CONTROLLER,
-+      .controller_offset = mt8365_tc_offset,
-+      .need_switch_bank = false,
-+      .bank_data = {
-+              {
-+                      .num_sensors = MT8365_NUM_SENSORS,
-+                      .sensors = mt8365_bank_data
-+              },
-+      },
-+      .msr = mt8365_msr,
-+      .adcpnp = mt8365_adcpnp,
-+      .sensor_mux_values = mt8365_mux_values,
-+      .version = MTK_THERMAL_V1,
-+      .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0,
-+      .apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28),
-+      .apmixed_buffer_ctl_set = 0,
-+};
-+
-+/*
-  * The MT2712 thermal controller has one bank, which can read up to
-  * four temperature sensors simultaneously. The MT2712 has a total of 4
-  * temperature sensors.
-@@ -1080,6 +1144,10 @@ static const struct of_device_id mtk_the
-       {
-               .compatible = "mediatek,mt8183-thermal",
-               .data = (void *)&mt8183_thermal_data,
-+      },
-+      {
-+              .compatible = "mediatek,mt8365-thermal",
-+              .data = (void *)&mt8365_thermal_data,
-       }, {
-       },
- };
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch b/target/linux/mediatek/patches-6.6/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch
deleted file mode 100644 (file)
index 5c99aa8..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-From 4eead70db74922bc61e9d0b4591524369a335751 Mon Sep 17 00:00:00 2001
-From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:46 +0100
-Subject: [PATCH 13/42] thermal/drivers/mediatek: Add delay after thermal banks
- initialization
-
-Thermal sensor reads performed immediately after thermal bank
-initialization returns bogus values. This is currently tackled by returning
-0 if the temperature is bogus (exceeding 200000).
-
-Instead, add a delay between the bank init and the thermal zone device
-register to properly fix this.
-
-Signed-off-by: Michael Kao <michael.kao@mediatek.com>
-Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-5-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 11 +++--------
- 1 file changed, 3 insertions(+), 8 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -816,14 +816,6 @@ static int mtk_thermal_bank_temperature(
-                       mt, conf->bank_data[bank->id].sensors[i], raw);
--              /*
--               * The first read of a sensor often contains very high bogus
--               * temperature value. Filter these out so that the system does
--               * not immediately shut down.
--               */
--              if (temp > 200000)
--                      temp = 0;
--
-               if (temp > max)
-                       max = temp;
-       }
-@@ -1281,6 +1273,9 @@ static int mtk_thermal_probe(struct plat
-       platform_set_drvdata(pdev, mt);
-+      /* Delay for thermal banks to be ready */
-+      msleep(30);
-+
-       tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-                                             &mtk_thermal_ops);
-       if (IS_ERR(tzdev)) {
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch b/target/linux/mediatek/patches-6.6/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch
deleted file mode 100644 (file)
index 734f5c1..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From ad9dc9e92367803a4f9576aea0dab110d03fc510 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wenst@chromium.org>
-Date: Tue, 28 Mar 2023 11:10:17 +0800
-Subject: [PATCH 14/42] thermal/drivers/mediatek/lvts_thermal: Fix sensor 1
- interrupt status bitmask
-
-The binary representation for sensor 1 interrupt status was incorrectly
-assembled, when compared to the full table given in the same comment
-section. The conversion into hex was also incorrect, leading to
-incorrect interrupt status bitmask for sensor 1. This would cause the
-driver to incorrectly identify changes for sensor 1, when in fact it
-was sensor 0, or a sensor access time out.
-
-Fix the binary and hex representations in the comments, and the actual
-bitmask macro.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230328031017.1360976-1-wenst@chromium.org
----
- drivers/thermal/mediatek/lvts_thermal.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -66,7 +66,7 @@
- #define LVTS_MONINT_CONF                      0x9FBF7BDE
- #define LVTS_INT_SENSOR0                      0x0009001F
--#define LVTS_INT_SENSOR1                      0X000881F0
-+#define LVTS_INT_SENSOR1                      0x001203E0
- #define LVTS_INT_SENSOR2                      0x00247C00
- #define LVTS_INT_SENSOR3                      0x1FC00000
-@@ -395,8 +395,8 @@ static irqreturn_t lvts_ctrl_irq_handler
-        *                  => 0x1FC00000
-        * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
-        *                  => 0x00247C00
--       * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
--       *                  => 0X000881F0
-+       * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000
-+       *                  => 0X001203E0
-        * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
-        *                  => 0x0009001F
-        */
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch
deleted file mode 100644 (file)
index d09c205..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-From 9aad43ad3285fc21158fb416830a6156a9a31fa5 Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Tue, 7 Mar 2023 16:45:22 +0100
-Subject: [PATCH 15/42] thermal/drivers/mediatek/lvts_thermal: Add AP domain
- for mt8195
-
-Add MT8195 AP Domain support to LVTS Driver.
-
-Take the opportunity to update the comments to show calibration data
-information related to the new domain.
-
-[dlezcano]: Massaged a bit the changelog
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 94 +++++++++++++++++++------
- 1 file changed, 74 insertions(+), 20 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -530,29 +530,33 @@ static int lvts_sensor_init(struct devic
-  * The efuse blob values follows the sensor enumeration per thermal
-  * controller. The decoding of the stream is as follow:
-  *
-- *                        <--?-> <----big0 ???---> <-sensor0-> <-0->
-- *                        ------------------------------------------
-- * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
-- *                        ------------------------------------------
-+ * stream index map for MCU Domain :
-  *
-- *                        <--sensor1--><-0-> <----big1 ???---> <-sen
-- *                        ------------------------------------------
-- *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-- *                        ------------------------------------------
-+ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
-+ *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
-  *
-- *                        sor0-> <-0-> <-sensor1-> <-0-> ..........
-- *                        ------------------------------------------
-- *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-- *                        ------------------------------------------
-+ * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3----->
-+ *  0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
-  *
-- * And so on ...
-+ * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
-+ *  0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
-+ *
-+ * stream index map for AP Domain :
-+ *
-+ * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
-+ *  0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
-+ *
-+ * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3----->
-+ *  0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
-+ *
-+ * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
-+ *  0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
-+ *
-+ * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
-+ *  0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
-  *
-  * The data description gives the offset of the calibration data in
-  * this bytes stream for each sensor.
-- *
-- * Each thermal controller can handle up to 4 sensors max, we don't
-- * care if there are less as the array of calibration is sized to 4
-- * anyway. The unused sensor slot will be zeroed.
-  */
- static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
-                                       const struct lvts_ctrl_data *lvts_ctrl_data,
-@@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_d
-       return 0;
- }
--static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
-+static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
-       {
-               .cal_offset = { 0x04, 0x07 },
-               .lvts_sensor = {
-@@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt819
-       }
- };
-+static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
-+              {
-+              .cal_offset = { 0x25, 0x28 },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_AP_VPU0 },
-+                      { .dt_id = MT8195_AP_VPU1 }
-+              },
-+              .num_lvts_sensor = 2,
-+              .offset = 0x0,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      },
-+      {
-+              .cal_offset = { 0x2e, 0x31 },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_AP_GPU0 },
-+                      { .dt_id = MT8195_AP_GPU1 }
-+              },
-+              .num_lvts_sensor = 2,
-+              .offset = 0x100,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      },
-+      {
-+              .cal_offset = { 0x37, 0x3a, 0x3d },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_AP_VDEC },
-+                      { .dt_id = MT8195_AP_IMG },
-+                      { .dt_id = MT8195_AP_INFRA },
-+              },
-+              .num_lvts_sensor = 3,
-+              .offset = 0x200,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      },
-+      {
-+              .cal_offset = { 0x43, 0x46 },
-+              .lvts_sensor = {
-+                      { .dt_id = MT8195_AP_CAM0 },
-+                      { .dt_id = MT8195_AP_CAM1 }
-+              },
-+              .num_lvts_sensor = 2,
-+              .offset = 0x300,
-+              .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+      }
-+};
-+
- static const struct lvts_data mt8195_lvts_mcu_data = {
--      .lvts_ctrl      = mt8195_lvts_data_ctrl,
--      .num_lvts_ctrl  = ARRAY_SIZE(mt8195_lvts_data_ctrl),
-+      .lvts_ctrl      = mt8195_lvts_mcu_data_ctrl,
-+      .num_lvts_ctrl  = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
-+};
-+
-+static const struct lvts_data mt8195_lvts_ap_data = {
-+      .lvts_ctrl      = mt8195_lvts_ap_data_ctrl,
-+      .num_lvts_ctrl  = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
- };
- static const struct of_device_id lvts_of_match[] = {
-       { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
-+      { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
-       {},
- };
- MODULE_DEVICE_TABLE(of, lvts_of_match);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch b/target/linux/mediatek/patches-6.6/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch
deleted file mode 100644 (file)
index a48ea37..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7105a86760bd9e4d107075cefc75016b693a5542 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 19 Apr 2023 08:11:45 +0200
-Subject: [PATCH 16/42] Revert "thermal/drivers/mediatek: Add delay after
- thermal banks initialization"
-
-Some more testing revealed that this commit introduces a regression on some
-MT8173 Chromebooks and at least on one MT6795 Sony Xperia M5 smartphone due
-to the delay being apparently variable and machine specific.
-
-Another solution would be to delay for a bit more (~70ms) but this is not
-feasible for two reasons: first of all, we're adding an even bigger delay
-in a probe function; second, some machines need less, some may need even
-more, making the msleep at probe solution highly suboptimal.
-
-This reverts commit 10debf8c2da8011c8009dd4b3f6d0ab85891c81b.
-
-Fixes: 10debf8c2da8 ("thermal/drivers/mediatek: Add delay after thermal banks initialization")
-Reported-by: "kernelci.org bot" <bot@kernelci.org>
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419061146.22246-2-angelogioacchino.delregno@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -816,6 +816,14 @@ static int mtk_thermal_bank_temperature(
-                       mt, conf->bank_data[bank->id].sensors[i], raw);
-+              /*
-+               * The first read of a sensor often contains very high bogus
-+               * temperature value. Filter these out so that the system does
-+               * not immediately shut down.
-+               */
-+              if (temp > 200000)
-+                      temp = 0;
-+
-               if (temp > max)
-                       max = temp;
-       }
-@@ -1273,9 +1281,6 @@ static int mtk_thermal_probe(struct plat
-       platform_set_drvdata(pdev, mt);
--      /* Delay for thermal banks to be ready */
--      msleep(30);
--
-       tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-                                             &mtk_thermal_ops);
-       if (IS_ERR(tzdev)) {
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch b/target/linux/mediatek/patches-6.6/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch
deleted file mode 100644 (file)
index aae87af..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-From 681b652c9dfc4037d4a55b2733e091a4e1a5de18 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 19 Apr 2023 08:11:46 +0200
-Subject: [PATCH 17/42] thermal/drivers/mediatek: Add temperature constraints
- to validate read
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The AUXADC thermal v1 allows reading temperature range between -20°C to
-150°C and any value out of this range is invalid.
-
-Add new definitions for MT8173_TEMP_{MIN_MAX} and a new small helper
-mtk_thermal_temp_is_valid() to check if new readings are in range: if
-not, we tell to the API that the reading is invalid by returning
-THERMAL_TEMP_INVALID.
-
-It was chosen to introduce the helper function because, even though this
-temperature range is realistically ok for all, it comes from a downstream
-kernel driver for version 1, but here we also support v2 and v3 which may
-may have wider constraints.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419061146.22246-3-angelogioacchino.delregno@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 24 +++++++++++++++++------
- 1 file changed, 18 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -116,6 +116,10 @@
- /* The calibration coefficient of sensor  */
- #define MT8173_CALIBRATION    165
-+/* Valid temperatures range */
-+#define MT8173_TEMP_MIN               -20000
-+#define MT8173_TEMP_MAX               150000
-+
- /*
-  * Layout of the fuses providing the calibration data
-  * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-@@ -689,6 +693,11 @@ static const struct mtk_thermal_data mt7
-       .version = MTK_THERMAL_V3,
- };
-+static bool mtk_thermal_temp_is_valid(int temp)
-+{
-+      return (temp >= MT8173_TEMP_MIN) && (temp <= MT8173_TEMP_MAX);
-+}
-+
- /**
-  * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-  * @mt:       The thermal controller
-@@ -815,14 +824,17 @@ static int mtk_thermal_bank_temperature(
-               temp = mt->raw_to_mcelsius(
-                       mt, conf->bank_data[bank->id].sensors[i], raw);
--
-               /*
--               * The first read of a sensor often contains very high bogus
--               * temperature value. Filter these out so that the system does
--               * not immediately shut down.
-+               * Depending on the filt/sen intervals and ADC polling time,
-+               * we may need up to 60 milliseconds after initialization: this
-+               * will result in the first reading containing an out of range
-+               * temperature value.
-+               * Validate the reading to both address the aforementioned issue
-+               * and to eventually avoid bogus readings during runtime in the
-+               * event that the AUXADC gets unstable due to high EMI, etc.
-                */
--              if (temp > 200000)
--                      temp = 0;
-+              if (!mtk_thermal_temp_is_valid(temp))
-+                      temp = THERMAL_TEMP_INVALID;
-               if (temp > max)
-                       max = temp;
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch
deleted file mode 100644 (file)
index 782684a..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From 458fa1d508de3f17e49d974a0158d9aeff273a58 Mon Sep 17 00:00:00 2001
-From: Kang Chen <void0red@hust.edu.cn>
-Date: Wed, 19 Apr 2023 10:07:48 +0800
-Subject: [PATCH 18/42] thermal/drivers/mediatek: Use devm_of_iomap to avoid
- resource leak in mtk_thermal_probe
-
-Smatch reports:
-1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
-2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
-
-The original code forgets to release iomap resource when handling errors,
-fix it by switch to devm_of_iomap.
-
-Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
-Signed-off-by: Kang Chen <void0red@hust.edu.cn>
-Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
----
- drivers/thermal/mediatek/auxadc_thermal.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1232,7 +1232,12 @@ static int mtk_thermal_probe(struct plat
-               return -ENODEV;
-       }
--      auxadc_base = of_iomap(auxadc, 0);
-+      auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL);
-+      if (IS_ERR(auxadc_base)) {
-+              of_node_put(auxadc);
-+              return PTR_ERR(auxadc_base);
-+      }
-+
-       auxadc_phys_base = of_get_phys_base(auxadc);
-       of_node_put(auxadc);
-@@ -1248,7 +1253,12 @@ static int mtk_thermal_probe(struct plat
-               return -ENODEV;
-       }
--      apmixed_base = of_iomap(apmixedsys, 0);
-+      apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL);
-+      if (IS_ERR(apmixed_base)) {
-+              of_node_put(apmixedsys);
-+              return PTR_ERR(apmixed_base);
-+      }
-+
-       apmixed_phys_base = of_get_phys_base(apmixedsys);
-       of_node_put(apmixedsys);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch b/target/linux/mediatek/patches-6.6/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch
deleted file mode 100644 (file)
index d7896db..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 227d1856924ec00a4f5bdf5afcf77bc7f3f04e86 Mon Sep 17 00:00:00 2001
-From: Kang Chen <void0red@hust.edu.cn>
-Date: Wed, 19 Apr 2023 10:07:49 +0800
-Subject: [PATCH 19/42] thermal/drivers/mediatek: Change clk_prepare_enable to
- devm_clk_get_enabled in mtk_thermal_probe
-
-Use devm_clk_get_enabled to do automatic resource management.
-Meanwhile, remove error handling labels in the probe function and
-the whole remove function.
-
-Signed-off-by: Kang Chen <void0red@hust.edu.cn>
-Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419020749.621257-2-void0red@hust.edu.cn
----
- drivers/thermal/mediatek/auxadc_thermal.c | 44 +++++------------------
- 1 file changed, 9 insertions(+), 35 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1206,14 +1206,6 @@ static int mtk_thermal_probe(struct plat
-       mt->conf = of_device_get_match_data(&pdev->dev);
--      mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
--      if (IS_ERR(mt->clk_peri_therm))
--              return PTR_ERR(mt->clk_peri_therm);
--
--      mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
--      if (IS_ERR(mt->clk_auxadc))
--              return PTR_ERR(mt->clk_auxadc);
--
-       mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-       if (IS_ERR(mt->thermal_base))
-               return PTR_ERR(mt->thermal_base);
-@@ -1272,16 +1264,18 @@ static int mtk_thermal_probe(struct plat
-       if (ret)
-               return ret;
--      ret = clk_prepare_enable(mt->clk_auxadc);
--      if (ret) {
-+      mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc");
-+      if (IS_ERR(mt->clk_auxadc)) {
-+              ret = PTR_ERR(mt->clk_auxadc);
-               dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
-               return ret;
-       }
--      ret = clk_prepare_enable(mt->clk_peri_therm);
--      if (ret) {
-+      mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm");
-+      if (IS_ERR(mt->clk_peri_therm)) {
-+              ret = PTR_ERR(mt->clk_peri_therm);
-               dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
--              goto err_disable_clk_auxadc;
-+              return ret;
-       }
-       mtk_thermal_turn_on_buffer(mt, apmixed_base);
-@@ -1305,38 +1299,18 @@ static int mtk_thermal_probe(struct plat
-       tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-                                             &mtk_thermal_ops);
--      if (IS_ERR(tzdev)) {
--              ret = PTR_ERR(tzdev);
--              goto err_disable_clk_peri_therm;
--      }
-+      if (IS_ERR(tzdev))
-+              return PTR_ERR(tzdev);
-       ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
-       if (ret)
-               dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
-       return 0;
--
--err_disable_clk_peri_therm:
--      clk_disable_unprepare(mt->clk_peri_therm);
--err_disable_clk_auxadc:
--      clk_disable_unprepare(mt->clk_auxadc);
--
--      return ret;
--}
--
--static int mtk_thermal_remove(struct platform_device *pdev)
--{
--      struct mtk_thermal *mt = platform_get_drvdata(pdev);
--
--      clk_disable_unprepare(mt->clk_peri_therm);
--      clk_disable_unprepare(mt->clk_auxadc);
--
--      return 0;
- }
- static struct platform_driver mtk_thermal_driver = {
-       .probe = mtk_thermal_probe,
--      .remove = mtk_thermal_remove,
-       .driver = {
-               .name = "mtk-thermal",
-               .of_match_table = mtk_thermal_of_match,
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch b/target/linux/mediatek/patches-6.6/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch
deleted file mode 100644 (file)
index fd18a53..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 655fe2533ac05323a07c19ba079bf2064e7741af Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Sun, 19 Mar 2023 11:32:31 -0500
-Subject: [PATCH 20/42] thermal/drivers/mediatek: Use of_address_to_resource()
-
-Replace of_get_address() and of_translate_address() calls with single
-call to of_address_to_resource().
-
-Signed-off-by: Rob Herring <robh@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230319163231.226738-1-robh@kernel.org
----
- drivers/thermal/mediatek/auxadc_thermal.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -979,14 +979,12 @@ static void mtk_thermal_init_bank(struct
- static u64 of_get_phys_base(struct device_node *np)
- {
--      u64 size64;
--      const __be32 *regaddr_p;
-+      struct resource res;
--      regaddr_p = of_get_address(np, 0, &size64, NULL);
--      if (!regaddr_p)
-+      if (of_address_to_resource(np, 0, &res))
-               return OF_BAD_ADDR;
--      return of_translate_address(np, regaddr_p);
-+      return res.start;
- }
- static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch b/target/linux/mediatek/patches-6.6/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch
deleted file mode 100644 (file)
index c3ff17d..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 2c380d07215e6fce3ac66cc5af059bc2c2a69f7a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ricardo=20Ca=C3=B1uelo?= <ricardo.canuelo@collabora.com>
-Date: Thu, 25 May 2023 14:18:11 +0200
-Subject: [PATCH 21/42] Revert "thermal/drivers/mediatek: Use devm_of_iomap to
- avoid resource leak in mtk_thermal_probe"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26.
-
-That change was causing a regression in the generic-adc-thermal-probed
-bootrr test as reported in the kernelci-results list [1].
-A proper rework will take longer, so revert it for now.
-
-[1] https://groups.io/g/kernelci-results/message/42660
-
-Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe")
-Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
-Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 14 ++------------
- 1 file changed, 2 insertions(+), 12 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1222,12 +1222,7 @@ static int mtk_thermal_probe(struct plat
-               return -ENODEV;
-       }
--      auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL);
--      if (IS_ERR(auxadc_base)) {
--              of_node_put(auxadc);
--              return PTR_ERR(auxadc_base);
--      }
--
-+      auxadc_base = of_iomap(auxadc, 0);
-       auxadc_phys_base = of_get_phys_base(auxadc);
-       of_node_put(auxadc);
-@@ -1243,12 +1238,7 @@ static int mtk_thermal_probe(struct plat
-               return -ENODEV;
-       }
--      apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL);
--      if (IS_ERR(apmixed_base)) {
--              of_node_put(apmixedsys);
--              return PTR_ERR(apmixed_base);
--      }
--
-+      apmixed_base = of_iomap(apmixedsys, 0);
-       apmixed_phys_base = of_get_phys_base(apmixedsys);
-       of_node_put(apmixedsys);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch b/target/linux/mediatek/patches-6.6/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch
deleted file mode 100644 (file)
index c445652..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 496f4b08981d8a788ad5a2073fa1c65a2af1862b Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wenst@chromium.org>
-Date: Tue, 13 Jun 2023 17:13:16 +0800
-Subject: [PATCH 22/42] thermal/drivers/mediatek/lvts_thermal: Register thermal
- zones as hwmon sensors
-
-Register thermal zones as hwmon sensors to let userspace read
-temperatures using standard hwmon interface.
-
-Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230613091317.1691247-1-wenst@chromium.org
----
- drivers/thermal/mediatek/lvts_thermal.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -19,6 +19,8 @@
- #include <linux/thermal.h>
- #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-+#include "../thermal_hwmon.h"
-+
- #define LVTS_MONCTL0(__base)  (__base + 0x0000)
- #define LVTS_MONCTL1(__base)  (__base + 0x0004)
- #define LVTS_MONCTL2(__base)  (__base + 0x0008)
-@@ -996,6 +998,9 @@ static int lvts_ctrl_start(struct device
-                       return PTR_ERR(tz);
-               }
-+              if (devm_thermal_add_hwmon_sysfs(dev, tz))
-+                      dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id);
-+
-               /*
-                * The thermal zone pointer will be needed in the
-                * interrupt handler, we store it in the sensor
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch b/target/linux/mediatek/patches-6.6/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch
deleted file mode 100644 (file)
index 22e7a95..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 885b9768ce2a66ed5d250822aed53d5114c895da Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Tue, 20 Jun 2023 17:07:31 +0800
-Subject: [PATCH 23/42] thermal/drivers/mediatek/lvts_thermal: Remove redundant
- msg in lvts_ctrl_start()
-
-The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
-print error information.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230620090732.50025-10-frank.li@vivo.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -998,8 +998,7 @@ static int lvts_ctrl_start(struct device
-                       return PTR_ERR(tz);
-               }
--              if (devm_thermal_add_hwmon_sysfs(dev, tz))
--                      dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id);
-+              devm_thermal_add_hwmon_sysfs(dev, tz);
-               /*
-                * The thermal zone pointer will be needed in the
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch
deleted file mode 100644 (file)
index bc67727..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-From 27b389d9f62c2174f95fe4002b11e77d4cb3ce80 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:32 -0400
-Subject: [PATCH 25/42] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on
- all controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is a single IRQ handler for each LVTS thermal domain, and it is
-supposed to check each of its underlying controllers for the origin of
-the interrupt and clear its status. However due to a typo, only the
-first controller was ever being handled, which resulted in the interrupt
-never being cleared when it happened on the other controllers. Add the
-missing index so interrupts are handled for all controllers.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -451,7 +451,7 @@ static irqreturn_t lvts_irq_handler(int
-       for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
--              aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
-+              aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]);
-               if (aux != IRQ_HANDLED)
-                       continue;
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch
deleted file mode 100644 (file)
index 51d119c..0000000
+++ /dev/null
@@ -1,120 +0,0 @@
-From 6d827142643ee10c13ff9a1d90f38fb399aa9fff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:33 -0400
-Subject: [PATCH 26/42] thermal/drivers/mediatek/lvts_thermal: Honor sensors in
- immediate mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Each controller can be configured to operate on immediate or filtered
-mode. On filtered mode, the sensors are enabled by setting the
-corresponding bits in MONCTL0, while on immediate mode, by setting
-MSRCTL1.
-
-Previously, the code would set MSRCTL1 for all four sensors when
-configured to immediate mode, but given that the controller might not
-have all four sensors connected, this would cause interrupts to trigger
-for non-existent sensors. Fix this by handling the MSRCTL1 register
-analogously to the MONCTL0: only enable the sensors that were declared.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 57 ++++++++++++++-----------
- 1 file changed, 33 insertions(+), 24 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -897,24 +897,6 @@ static int lvts_ctrl_configure(struct de
-       writel(value, LVTS_MSRCTL0(lvts_ctrl->base));
-       /*
--       * LVTS_MSRCTL1 : Measurement control
--       *
--       * Bits:
--       *
--       * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
--       * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
--       * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
--       * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
--       *
--       * That configuration will ignore the filtering and the delays
--       * introduced below in MONCTL1 and MONCTL2
--       */
--      if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
--              value = BIT(9) | BIT(6) | BIT(5) | BIT(4);
--              writel(value, LVTS_MSRCTL1(lvts_ctrl->base));
--      }
--
--      /*
-        * LVTS_MONCTL1 : Period unit and group interval configuration
-        *
-        * The clock source of LVTS thermal controller is 26MHz.
-@@ -979,6 +961,15 @@ static int lvts_ctrl_start(struct device
-       struct thermal_zone_device *tz;
-       u32 sensor_map = 0;
-       int i;
-+      /*
-+       * Bitmaps to enable each sensor on immediate and filtered modes, as
-+       * described in MSRCTL1 and MONCTL0 registers below, respectively.
-+       */
-+      u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) };
-+      u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) };
-+
-+      u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ?
-+                           sensor_imm_bitmap : sensor_filt_bitmap;
-       for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
-@@ -1016,20 +1007,38 @@ static int lvts_ctrl_start(struct device
-                * map, so we can enable the temperature monitoring in
-                * the hardware thermal controller.
-                */
--              sensor_map |= BIT(i);
-+              sensor_map |= sensor_bitmap[i];
-       }
-       /*
--       * Bits:
--       *      9: Single point access flow
--       *    0-3: Enable sensing point 0-3
--       *
-        * The initialization of the thermal zones give us
-        * which sensor point to enable. If any thermal zone
-        * was not described in the device tree, it won't be
-        * enabled here in the sensor map.
-        */
--      writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+      if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
-+              /*
-+               * LVTS_MSRCTL1 : Measurement control
-+               *
-+               * Bits:
-+               *
-+               * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
-+               * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
-+               * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
-+               * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
-+               *
-+               * That configuration will ignore the filtering and the delays
-+               * introduced in MONCTL1 and MONCTL2
-+               */
-+              writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base));
-+      } else {
-+              /*
-+               * Bits:
-+               *      9: Single point access flow
-+               *    0-3: Enable sensing point 0-3
-+               */
-+              writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+      }
-       return 0;
- }
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch b/target/linux/mediatek/patches-6.6/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch
deleted file mode 100644 (file)
index bfbadee..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From 93bb11dd19bdcc1fc97c7ceababd0db9fde128ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:34 -0400
-Subject: [PATCH 27/42] thermal/drivers/mediatek/lvts_thermal: Use offset
- threshold for IRQ
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are two kinds of temperature monitoring interrupts available:
-* High Offset, Low Offset
-* Hot, Hot to normal, Cold
-
-The code currently uses the hot/h2n/cold interrupts, however in a way
-that doesn't work: the cold threshold is left uninitialized, which
-prevents the other thresholds from ever triggering, and the h2n
-interrupt is used as the lower threshold, which prevents the hot
-interrupt from triggering again after the thresholds are updated by the
-thermal framework, since a hot interrupt can only trigger again after
-the hot to normal interrupt has been triggered.
-
-But better yet than addressing those issues, is to use the high/low
-offset interrupts instead. This way only two thresholds need to be
-managed, which have a simpler state machine, making them a better match
-to the thermal framework's high and low thresholds.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -298,9 +298,9 @@ static int lvts_set_trips(struct thermal
-       u32 raw_high = lvts_temp_to_raw(high);
-       /*
--       * Hot to normal temperature threshold
-+       * Low offset temperature threshold
-        *
--       * LVTS_H2NTHRE
-+       * LVTS_OFFSETL
-        *
-        * Bits:
-        *
-@@ -309,13 +309,13 @@ static int lvts_set_trips(struct thermal
-       if (low != -INT_MAX) {
-               pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-                        thermal_zone_device_type(tz), low);
--              writel(raw_low, LVTS_H2NTHRE(base));
-+              writel(raw_low, LVTS_OFFSETL(base));
-       }
-       /*
--       * Hot temperature threshold
-+       * High offset temperature threshold
-        *
--       * LVTS_HTHRE
-+       * LVTS_OFFSETH
-        *
-        * Bits:
-        *
-@@ -323,7 +323,7 @@ static int lvts_set_trips(struct thermal
-        */
-       pr_debug("%s: Setting high limit temperature interrupt: %d\n",
-                thermal_zone_device_type(tz), high);
--      writel(raw_high, LVTS_HTHRE(base));
-+      writel(raw_high, LVTS_OFFSETH(base));
-       return 0;
- }
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch b/target/linux/mediatek/patches-6.6/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch
deleted file mode 100644 (file)
index 1c35d0a..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-From 8f8cab9d3e90acf1db278ef44ad05f10aefb973f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:35 -0400
-Subject: [PATCH 28/42] thermal/drivers/mediatek/lvts_thermal: Disable
- undesired interrupts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Out of the many interrupts supported by the hardware, the only ones of
-interest to the driver currently are:
-* The temperature went over the high offset threshold, for any of the
-  sensors
-* The temperature went below the low offset threshold, for any of the
-  sensors
-* The temperature went over the stage3 threshold
-
-These are the only thresholds configured by the driver through the
-OFFSETH, OFFSETL, and PROTTC registers, respectively.
-
-The current interrupt mask in LVTS_MONINT_CONF, enables many more
-interrupts, including data ready on sensors for both filtered and
-immediate mode. These are not only not handled by the driver, but they
-are also triggered too often, causing unneeded overhead. Disable these
-unnecessary interrupts.
-
-The meaning of each bit can be seen in the comment describing
-LVTS_MONINTST in the IRQ handler.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -65,7 +65,7 @@
- #define LVTS_HW_FILTER                                0x2
- #define LVTS_TSSEL_CONF                               0x13121110
- #define LVTS_CALSCALE_CONF                    0x300
--#define LVTS_MONINT_CONF                      0x9FBF7BDE
-+#define LVTS_MONINT_CONF                      0x8300318C
- #define LVTS_INT_SENSOR0                      0x0009001F
- #define LVTS_INT_SENSOR1                      0x001203E0
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch b/target/linux/mediatek/patches-6.6/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch
deleted file mode 100644 (file)
index 60942fd..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From bd1ccf9408e6155564530af5e09b53ae497fe332 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:36 -0400
-Subject: [PATCH 29/42] thermal/drivers/mediatek/lvts_thermal: Don't leave
- threshold zeroed
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The thermal framework might leave the low threshold unset if there
-aren't any lower trip points. This leaves the register zeroed, which
-translates to a very high temperature for the low threshold. The
-interrupt for this threshold is then immediately triggered, and the
-state machine gets stuck, preventing any other temperature monitoring
-interrupts to ever trigger.
-
-(The same happens by not setting the Cold or Hot to Normal thresholds
-when using those)
-
-Set the unused threshold to a valid low value. This value was chosen so
-that for any valid golden temperature read from the efuse, when the
-value is converted to raw and back again to milliCelsius, the result
-doesn't underflow.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -83,6 +83,8 @@
- #define LVTS_HW_SHUTDOWN_MT8195               105000
-+#define LVTS_MINIMUM_THRESHOLD                20000
-+
- static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
- static int coeff_b = LVTS_COEFF_B;
-@@ -294,7 +296,7 @@ static int lvts_set_trips(struct thermal
- {
-       struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-       void __iomem *base = lvts_sensor->base;
--      u32 raw_low = lvts_temp_to_raw(low);
-+      u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
-       u32 raw_high = lvts_temp_to_raw(high);
-       /*
-@@ -306,11 +308,9 @@ static int lvts_set_trips(struct thermal
-        *
-        * 14-0 : Raw temperature for threshold
-        */
--      if (low != -INT_MAX) {
--              pr_debug("%s: Setting low limit temperature interrupt: %d\n",
--                       thermal_zone_device_type(tz), low);
--              writel(raw_low, LVTS_OFFSETL(base));
--      }
-+      pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-+               thermal_zone_device_type(tz), low);
-+      writel(raw_low, LVTS_OFFSETL(base));
-       /*
-        * High offset temperature threshold
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch b/target/linux/mediatek/patches-6.6/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch
deleted file mode 100644 (file)
index e99aa0c..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From d4dd09968cab3249e6148e1c3fccb51824edb411 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:37 -0400
-Subject: [PATCH 30/42] thermal/drivers/mediatek/lvts_thermal: Manage threshold
- between sensors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Each LVTS thermal controller can have up to four sensors, each capable
-of triggering its own interrupt when its measured temperature crosses
-the configured threshold. The threshold for each sensor is handled
-separately by the thermal framework, since each one is registered with
-its own thermal zone and trips. However, the temperature thresholds are
-configured on the controller, and therefore are shared between all
-sensors on that controller.
-
-When the temperature measured by the sensors is different enough to
-cause the thermal framework to configure different thresholds for each
-one, interrupts start triggering on sensors outside the last threshold
-configured.
-
-To address the issue, track the thresholds required by each sensor and
-only actually set the highest one in the hardware, and disable
-interrupts for all sensors outside the current configured range.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 69 +++++++++++++++++++++++++
- 1 file changed, 69 insertions(+)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -67,6 +67,11 @@
- #define LVTS_CALSCALE_CONF                    0x300
- #define LVTS_MONINT_CONF                      0x8300318C
-+#define LVTS_MONINT_OFFSET_SENSOR0            0xC
-+#define LVTS_MONINT_OFFSET_SENSOR1            0x180
-+#define LVTS_MONINT_OFFSET_SENSOR2            0x3000
-+#define LVTS_MONINT_OFFSET_SENSOR3            0x3000000
-+
- #define LVTS_INT_SENSOR0                      0x0009001F
- #define LVTS_INT_SENSOR1                      0x001203E0
- #define LVTS_INT_SENSOR2                      0x00247C00
-@@ -112,6 +117,8 @@ struct lvts_sensor {
-       void __iomem *base;
-       int id;
-       int dt_id;
-+      int low_thresh;
-+      int high_thresh;
- };
- struct lvts_ctrl {
-@@ -121,6 +128,8 @@ struct lvts_ctrl {
-       int num_lvts_sensor;
-       int mode;
-       void __iomem *base;
-+      int low_thresh;
-+      int high_thresh;
- };
- struct lvts_domain {
-@@ -292,12 +301,66 @@ static int lvts_get_temp(struct thermal_
-       return 0;
- }
-+static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
-+{
-+      u32 masks[] = {
-+              LVTS_MONINT_OFFSET_SENSOR0,
-+              LVTS_MONINT_OFFSET_SENSOR1,
-+              LVTS_MONINT_OFFSET_SENSOR2,
-+              LVTS_MONINT_OFFSET_SENSOR3,
-+      };
-+      u32 value = 0;
-+      int i;
-+
-+      value = readl(LVTS_MONINT(lvts_ctrl->base));
-+
-+      for (i = 0; i < ARRAY_SIZE(masks); i++) {
-+              if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
-+                  && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
-+                      value |= masks[i];
-+              else
-+                      value &= ~masks[i];
-+      }
-+
-+      writel(value, LVTS_MONINT(lvts_ctrl->base));
-+}
-+
-+static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
-+{
-+      int i;
-+
-+      if (high > lvts_ctrl->high_thresh)
-+              return true;
-+
-+      for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++)
-+              if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
-+                  && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
-+                      return false;
-+
-+      return true;
-+}
-+
- static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
- {
-       struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-+      struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
-       void __iomem *base = lvts_sensor->base;
-       u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
-       u32 raw_high = lvts_temp_to_raw(high);
-+      bool should_update_thresh;
-+
-+      lvts_sensor->low_thresh = low;
-+      lvts_sensor->high_thresh = high;
-+
-+      should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high);
-+      if (should_update_thresh) {
-+              lvts_ctrl->high_thresh = high;
-+              lvts_ctrl->low_thresh = low;
-+      }
-+      lvts_update_irq_mask(lvts_ctrl);
-+
-+      if (!should_update_thresh)
-+              return 0;
-       /*
-        * Low offset temperature threshold
-@@ -521,6 +584,9 @@ static int lvts_sensor_init(struct devic
-                */
-               lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ?
-                       imm_regs[i] : msr_regs[i];
-+
-+              lvts_sensor[i].low_thresh = INT_MIN;
-+              lvts_sensor[i].high_thresh = INT_MIN;
-       };
-       lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
-@@ -688,6 +754,9 @@ static int lvts_ctrl_init(struct device
-                */
-               lvts_ctrl[i].hw_tshut_raw_temp =
-                       lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
-+
-+              lvts_ctrl[i].low_thresh = INT_MIN;
-+              lvts_ctrl[i].high_thresh = INT_MIN;
-       }
-       /*
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch b/target/linux/mediatek/patches-6.6/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch
deleted file mode 100644 (file)
index 9ce3eeb..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From 5af4904adc8b840987000724977c13c706d3b7d8 Mon Sep 17 00:00:00 2001
-From: Minjie Du <duminjie@vivo.com>
-Date: Thu, 13 Jul 2023 12:24:12 +0800
-Subject: [PATCH 31/42] thermal/drivers/mediatek/lvts: Fix parameter check in
- lvts_debugfs_init()
-
-The documentation says "If an error occurs, ERR_PTR(-ERROR) will be
-returned" but the current code checks against a NULL pointer returned.
-
-Fix this by checking if IS_ERR().
-
-Signed-off-by: Minjie Du <duminjie@vivo.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -201,7 +201,7 @@ static int lvts_debugfs_init(struct devi
-       int i;
-       lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL);
--      if (!lvts_td->dom_dentry)
-+      if (IS_ERR(lvts_td->dom_dentry))
-               return 0;
-       for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch b/target/linux/mediatek/patches-6.6/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch
deleted file mode 100644 (file)
index 4841054..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From 6186be80317d1dbda34d35c06c084a083938f2d3 Mon Sep 17 00:00:00 2001
-From: Chen Jiahao <chenjiahao16@huawei.com>
-Date: Wed, 2 Aug 2023 17:45:27 +0800
-Subject: [PATCH 32/42] thermal/drivers/mediatek: Clean up redundant
- dev_err_probe()
-
-Referring to platform_get_irq()'s definition, the return value has
-already been checked if ret < 0, and printed via dev_err_probe().
-Calling dev_err_probe() one more time outside platform_get_irq()
-is obviously redundant.
-
-Removing dev_err_probe() outside platform_get_irq() to clean up
-above problem.
-
-Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -1216,7 +1216,7 @@ static int lvts_probe(struct platform_de
-       irq = platform_get_irq(pdev, 0);
-       if (irq < 0)
--              return dev_err_probe(dev, irq, "No irq resource\n");
-+              return irq;
-       ret = lvts_domain_init(dev, lvts_td, lvts_data);
-       if (ret)
diff --git a/target/linux/mediatek/patches-6.6/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch b/target/linux/mediatek/patches-6.6/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch
deleted file mode 100644 (file)
index c88bf98..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From c2ab54ab0425388e65901a7af2fbf69ead968708 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 13 Jul 2023 11:42:37 -0400
-Subject: [PATCH 33/42] thermal/drivers/mediatek/lvts_thermal: Make readings
- valid in filtered mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently, when a controller is configured to use filtered mode, thermal
-readings are valid only about 30% of the time.
-
-Upon testing, it was noticed that lowering any of the interval settings
-resulted in an improved rate of valid data. The same was observed when
-decreasing the number of samples for each sensor (which also results in
-quicker measurements).
-
-Retrying the read with a timeout longer than the time it takes to
-resample (about 344us with these settings and 4 sensors) also improves
-the rate.
-
-Lower all timing settings to the minimum, configure the filtering to
-single sample, and poll the measurement register for at least one period
-to improve the data validity on filtered mode.  With these changes in
-place, out of 100000 reads, a single one failed, ie 99.999% of the data
-was valid.
-
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230713154743.611870-1-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 19 ++++++++++++-------
- 1 file changed, 12 insertions(+), 7 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -58,11 +58,11 @@
- #define LVTS_PROTTC(__base)           (__base + 0x00CC)
- #define LVTS_CLKEN(__base)            (__base + 0x00E4)
--#define LVTS_PERIOD_UNIT                      ((118 * 1000) / (256 * 38))
--#define LVTS_GROUP_INTERVAL                   1
--#define LVTS_FILTER_INTERVAL          1
--#define LVTS_SENSOR_INTERVAL          1
--#define LVTS_HW_FILTER                                0x2
-+#define LVTS_PERIOD_UNIT                      0
-+#define LVTS_GROUP_INTERVAL                   0
-+#define LVTS_FILTER_INTERVAL          0
-+#define LVTS_SENSOR_INTERVAL          0
-+#define LVTS_HW_FILTER                                0x0
- #define LVTS_TSSEL_CONF                               0x13121110
- #define LVTS_CALSCALE_CONF                    0x300
- #define LVTS_MONINT_CONF                      0x8300318C
-@@ -86,6 +86,9 @@
- #define LVTS_MSR_IMMEDIATE_MODE               0
- #define LVTS_MSR_FILTERED_MODE                1
-+#define LVTS_MSR_READ_TIMEOUT_US      400
-+#define LVTS_MSR_READ_WAIT_US         (LVTS_MSR_READ_TIMEOUT_US / 2)
-+
- #define LVTS_HW_SHUTDOWN_MT8195               105000
- #define LVTS_MINIMUM_THRESHOLD                20000
-@@ -268,6 +271,7 @@ static int lvts_get_temp(struct thermal_
-       struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-       void __iomem *msr = lvts_sensor->msr;
-       u32 value;
-+      int rc;
-       /*
-        * Measurement registers:
-@@ -280,7 +284,8 @@ static int lvts_get_temp(struct thermal_
-        * 16   : Valid temperature
-        * 15-0 : Raw temperature
-        */
--      value = readl(msr);
-+      rc = readl_poll_timeout(msr, value, value & BIT(16),
-+                              LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US);
-       /*
-        * As the thermal zone temperature will read before the
-@@ -293,7 +298,7 @@ static int lvts_get_temp(struct thermal_
-        * functionning temperature and directly jump to a system
-        * shutdown.
-        */
--      if (!(value & BIT(16)))
-+      if (rc)
-               return -EAGAIN;
-       *temp = lvts_raw_to_temp(value & 0xFFFF);
diff --git a/target/linux/mediatek/patches-6.6/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch b/target/linux/mediatek/patches-6.6/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch
deleted file mode 100644 (file)
index 994461c..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From c864ff9de3b225b43bb8e08dedb223632323e059 Mon Sep 17 00:00:00 2001
-From: Andrei Coardos <aboutphysycs@gmail.com>
-Date: Fri, 11 Aug 2023 22:28:47 +0300
-Subject: [PATCH 34/42] thermal/drivers/mediatek/auxadc_thermal: Removed call
- to platform_set_drvdata()
-
-This function call was found to be unnecessary as there is no equivalent
-platform_get_drvdata() call to access the private data of the driver. Also,
-the private data is defined in this driver, so there is no risk of it being
-accessed outside of this driver file.
-
-Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
-Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1283,8 +1283,6 @@ static int mtk_thermal_probe(struct plat
-                       mtk_thermal_init_bank(mt, i, apmixed_phys_base,
-                                             auxadc_phys_base, ctrl_id);
--      platform_set_drvdata(pdev, mt);
--
-       tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-                                             &mtk_thermal_ops);
-       if (IS_ERR(tzdev))
diff --git a/target/linux/mediatek/patches-6.6/851-v6.2-i2c-mediatek-add-mt7986-support.patch b/target/linux/mediatek/patches-6.6/851-v6.2-i2c-mediatek-add-mt7986-support.patch
deleted file mode 100644 (file)
index 4c398c5..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-From 11f9a0f4e51887ad7b4a2898a368fcd0c2984e89 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 9 Oct 2022 12:16:31 +0200
-Subject: [PATCH 12/16] i2c: mediatek: add mt7986 support
-
-Add i2c support for MT7986 SoC.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -431,6 +431,19 @@ static const struct mtk_i2c_compatible m
-       .max_dma_support = 33,
- };
-+static const struct mtk_i2c_compatible mt7986_compat = {
-+      .quirks = &mt7622_i2c_quirks,
-+      .regs = mt_i2c_regs_v1,
-+      .pmic_i2c = 0,
-+      .dcm = 1,
-+      .auto_restart = 1,
-+      .aux_len_reg = 1,
-+      .timing_adjust = 0,
-+      .dma_sync = 1,
-+      .ltiming_adjust = 0,
-+      .max_dma_support = 32,
-+};
-+
- static const struct mtk_i2c_compatible mt8173_compat = {
-       .regs = mt_i2c_regs_v1,
-       .pmic_i2c = 0,
-@@ -503,6 +516,7 @@ static const struct of_device_id mtk_i2c
-       { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
-       { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
-       { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
-+      { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
-       { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
-       { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
-       { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
diff --git a/target/linux/mediatek/patches-6.6/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch b/target/linux/mediatek/patches-6.6/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch
deleted file mode 100644 (file)
index 18c66cd..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-From 98204ccafd45a8a6109ff2d60e2c179b95d92578 Mon Sep 17 00:00:00 2001
-From: ye xingchen <ye.xingchen@zte.com.cn>
-Date: Thu, 19 Jan 2023 17:19:58 +0800
-Subject: [PATCH 13/16] i2c: mt65xx: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -1366,20 +1366,17 @@ static int mtk_i2c_probe(struct platform
- {
-       int ret = 0;
-       struct mtk_i2c *i2c;
--      struct resource *res;
-       int i, irq, speed_clk;
-       i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
-       if (!i2c)
-               return -ENOMEM;
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+      i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-       if (IS_ERR(i2c->base))
-               return PTR_ERR(i2c->base);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--      i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
-+      i2c->pdmabase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
-       if (IS_ERR(i2c->pdmabase))
-               return PTR_ERR(i2c->pdmabase);
diff --git a/target/linux/mediatek/patches-6.6/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch b/target/linux/mediatek/patches-6.6/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch
deleted file mode 100644 (file)
index d000d53..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8106fa2e0ae6082833fe1df97829c46c0183eaea Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Sat, 11 Mar 2023 12:16:54 +0100
-Subject: [PATCH 14/16] i2c: mt65xx: drop of_match_ptr for ID table
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The driver can match only via the DT table so the table should be always
-used and the of_match_ptr does not have any sense (this also allows ACPI
-matching via PRP0001, even though it might not be relevant here).
-
-  drivers/i2c/busses/i2c-mt65xx.c:514:34: error: â€˜mtk_i2c_of_match’ defined but not used [-Werror=unused-const-variable=]
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Guenter Roeck <groeck@chromium.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -1546,7 +1546,7 @@ static struct platform_driver mtk_i2c_dr
-       .driver = {
-               .name = I2C_DRV_NAME,
-               .pm = &mtk_i2c_pm,
--              .of_match_table = of_match_ptr(mtk_i2c_of_match),
-+              .of_match_table = mtk_i2c_of_match,
-       },
- };
diff --git a/target/linux/mediatek/patches-6.6/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch b/target/linux/mediatek/patches-6.6/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch
deleted file mode 100644 (file)
index e097374..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-From f69f3d662ba3bf999c36d9ac1e684540c4487bc3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 10 Apr 2023 17:19:38 +0100
-Subject: [PATCH 15/16] i2c: mediatek: add support for MT7981 SoC
-
-Add support for the I2C units found in the MediaTek MT7981 and MT7988
-SoCs. Just like other recent MediaTek I2C units that also uses v3
-register offsets (which differ from v2 only by OFFSET_SLAVE_ADDR being
-0x94 instead of 0x4).
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -431,6 +431,18 @@ static const struct mtk_i2c_compatible m
-       .max_dma_support = 33,
- };
-+static const struct mtk_i2c_compatible mt7981_compat = {
-+      .regs = mt_i2c_regs_v3,
-+      .pmic_i2c = 0,
-+      .dcm = 0,
-+      .auto_restart = 1,
-+      .aux_len_reg = 1,
-+      .timing_adjust = 1,
-+      .dma_sync = 1,
-+      .ltiming_adjust = 1,
-+      .max_dma_support = 33
-+};
-+
- static const struct mtk_i2c_compatible mt7986_compat = {
-       .quirks = &mt7622_i2c_quirks,
-       .regs = mt_i2c_regs_v1,
-@@ -516,6 +528,7 @@ static const struct of_device_id mtk_i2c
-       { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
-       { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
-       { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
-+      { .compatible = "mediatek,mt7981-i2c", .data = &mt7981_compat },
-       { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
-       { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
-       { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch b/target/linux/mediatek/patches-6.6/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch
deleted file mode 100644 (file)
index 9607eec..0000000
+++ /dev/null
@@ -1,269 +0,0 @@
-From d35469096915f2551ed1d26da1ab12ff500fc963 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:33 +0800
-Subject: [PATCH 1/9] ASoC: mediatek: mt7986: add common header
-
-Add header files for register definition and structure.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-2-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt7986/mt7986-afe-common.h |  49 +++++
- sound/soc/mediatek/mt7986/mt7986-reg.h        | 196 ++++++++++++++++++
- 2 files changed, 245 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-common.h
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-reg.h
-
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-afe-common.h
-@@ -0,0 +1,49 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * mt7986-afe-common.h  --  MediaTek 7986 audio driver definitions
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ *          Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#ifndef _MT_7986_AFE_COMMON_H_
-+#define _MT_7986_AFE_COMMON_H_
-+
-+#include <sound/soc.h>
-+#include <linux/clk.h>
-+#include <linux/list.h>
-+#include <linux/regmap.h>
-+#include "../common/mtk-base-afe.h"
-+
-+enum {
-+      MT7986_MEMIF_DL1,
-+      MT7986_MEMIF_VUL12,
-+      MT7986_MEMIF_NUM,
-+      MT7986_DAI_ETDM = MT7986_MEMIF_NUM,
-+      MT7986_DAI_NUM,
-+};
-+
-+enum {
-+      MT7986_IRQ_0,
-+      MT7986_IRQ_1,
-+      MT7986_IRQ_2,
-+      MT7986_IRQ_NUM,
-+};
-+
-+struct mt7986_afe_private {
-+      struct clk_bulk_data *clks;
-+      int num_clks;
-+
-+      int pm_runtime_bypass_reg_ctl;
-+
-+      /* dai */
-+      void *dai_priv[MT7986_DAI_NUM];
-+};
-+
-+unsigned int mt7986_afe_rate_transform(struct device *dev,
-+                                     unsigned int rate);
-+
-+/* dai register */
-+int mt7986_dai_etdm_register(struct mtk_base_afe *afe);
-+#endif
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-reg.h
-@@ -0,0 +1,196 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * mt7986-reg.h  --  MediaTek 7986 audio driver reg definition
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ *          Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#ifndef _MT7986_REG_H_
-+#define _MT7986_REG_H_
-+
-+#define AUDIO_TOP_CON2                  0x0008
-+#define AUDIO_TOP_CON4                  0x0010
-+#define AUDIO_ENGEN_CON0                0x0014
-+#define AFE_IRQ_MCU_EN                  0x0100
-+#define AFE_IRQ_MCU_STATUS              0x0120
-+#define AFE_IRQ_MCU_CLR                 0x0128
-+#define AFE_IRQ0_MCU_CFG0               0x0140
-+#define AFE_IRQ0_MCU_CFG1               0x0144
-+#define AFE_IRQ1_MCU_CFG0               0x0148
-+#define AFE_IRQ1_MCU_CFG1               0x014c
-+#define AFE_IRQ2_MCU_CFG0               0x0150
-+#define AFE_IRQ2_MCU_CFG1               0x0154
-+#define ETDM_IN5_CON0                   0x13f0
-+#define ETDM_IN5_CON1                   0x13f4
-+#define ETDM_IN5_CON2                   0x13f8
-+#define ETDM_IN5_CON3                   0x13fc
-+#define ETDM_IN5_CON4                   0x1400
-+#define ETDM_OUT5_CON0                  0x1570
-+#define ETDM_OUT5_CON4                  0x1580
-+#define ETDM_OUT5_CON5                  0x1584
-+#define ETDM_4_7_COWORK_CON0            0x15e0
-+#define ETDM_4_7_COWORK_CON1            0x15e4
-+#define AFE_CONN018_1                   0x1b44
-+#define AFE_CONN018_4                   0x1b50
-+#define AFE_CONN019_1                   0x1b64
-+#define AFE_CONN019_4                   0x1b70
-+#define AFE_CONN124_1                   0x2884
-+#define AFE_CONN124_4                   0x2890
-+#define AFE_CONN125_1                   0x28a4
-+#define AFE_CONN125_4                   0x28b0
-+#define AFE_CONN_RS_0                   0x3920
-+#define AFE_CONN_RS_3                   0x392c
-+#define AFE_CONN_16BIT_0                0x3960
-+#define AFE_CONN_16BIT_3                0x396c
-+#define AFE_CONN_24BIT_0                0x3980
-+#define AFE_CONN_24BIT_3                0x398c
-+#define AFE_MEMIF_CON0                  0x3d98
-+#define AFE_MEMIF_RD_MON                0x3da0
-+#define AFE_MEMIF_WR_MON                0x3da4
-+#define AFE_DL0_BASE_MSB                0x3e40
-+#define AFE_DL0_BASE                    0x3e44
-+#define AFE_DL0_CUR_MSB                 0x3e48
-+#define AFE_DL0_CUR                     0x3e4c
-+#define AFE_DL0_END_MSB                 0x3e50
-+#define AFE_DL0_END                     0x3e54
-+#define AFE_DL0_RCH_MON                 0x3e58
-+#define AFE_DL0_LCH_MON                 0x3e5c
-+#define AFE_DL0_CON0                    0x3e60
-+#define AFE_VUL0_BASE_MSB               0x4220
-+#define AFE_VUL0_BASE                   0x4224
-+#define AFE_VUL0_CUR_MSB                0x4228
-+#define AFE_VUL0_CUR                    0x422c
-+#define AFE_VUL0_END_MSB                0x4230
-+#define AFE_VUL0_END                    0x4234
-+#define AFE_VUL0_CON0                   0x4238
-+
-+#define AFE_MAX_REGISTER AFE_VUL0_CON0
-+#define AFE_IRQ_STATUS_BITS             0x7
-+#define AFE_IRQ_CNT_SHIFT               0
-+#define AFE_IRQ_CNT_MASK              0xffffff
-+
-+/* AUDIO_TOP_CON2 */
-+#define CLK_OUT5_PDN                    BIT(14)
-+#define CLK_OUT5_PDN_MASK               BIT(14)
-+#define CLK_IN5_PDN                     BIT(7)
-+#define CLK_IN5_PDN_MASK                BIT(7)
-+
-+/* AUDIO_TOP_CON4 */
-+#define PDN_APLL_TUNER2                 BIT(12)
-+#define PDN_APLL_TUNER2_MASK            BIT(12)
-+
-+/* AUDIO_ENGEN_CON0 */
-+#define AUD_APLL2_EN                    BIT(3)
-+#define AUD_APLL2_EN_MASK               BIT(3)
-+#define AUD_26M_EN                      BIT(0)
-+#define AUD_26M_EN_MASK                 BIT(0)
-+
-+/* AFE_DL0_CON0 */
-+#define DL0_ON_SFT                      28
-+#define DL0_ON_MASK                     0x1
-+#define DL0_ON_MASK_SFT                 BIT(28)
-+#define DL0_MINLEN_SFT                  20
-+#define DL0_MINLEN_MASK                 0xf
-+#define DL0_MINLEN_MASK_SFT             (0xf << 20)
-+#define DL0_MODE_SFT                    8
-+#define DL0_MODE_MASK                   0x1f
-+#define DL0_MODE_MASK_SFT               (0x1f << 8)
-+#define DL0_PBUF_SIZE_SFT               5
-+#define DL0_PBUF_SIZE_MASK              0x3
-+#define DL0_PBUF_SIZE_MASK_SFT          (0x3 << 5)
-+#define DL0_MONO_SFT                    4
-+#define DL0_MONO_MASK                   0x1
-+#define DL0_MONO_MASK_SFT               BIT(4)
-+#define DL0_HALIGN_SFT                  2
-+#define DL0_HALIGN_MASK                 0x1
-+#define DL0_HALIGN_MASK_SFT             BIT(2)
-+#define DL0_HD_MODE_SFT                 0
-+#define DL0_HD_MODE_MASK                0x3
-+#define DL0_HD_MODE_MASK_SFT            (0x3 << 0)
-+
-+/* AFE_VUL0_CON0 */
-+#define VUL0_ON_SFT                     28
-+#define VUL0_ON_MASK                    0x1
-+#define VUL0_ON_MASK_SFT                BIT(28)
-+#define VUL0_MODE_SFT                   8
-+#define VUL0_MODE_MASK                  0x1f
-+#define VUL0_MODE_MASK_SFT              (0x1f << 8)
-+#define VUL0_MONO_SFT                   4
-+#define VUL0_MONO_MASK                  0x1
-+#define VUL0_MONO_MASK_SFT              BIT(4)
-+#define VUL0_HALIGN_SFT                 2
-+#define VUL0_HALIGN_MASK                0x1
-+#define VUL0_HALIGN_MASK_SFT            BIT(2)
-+#define VUL0_HD_MODE_SFT                0
-+#define VUL0_HD_MODE_MASK               0x3
-+#define VUL0_HD_MODE_MASK_SFT           (0x3 << 0)
-+
-+/* AFE_IRQ_MCU_CON */
-+#define IRQ_MCU_MODE_SFT                4
-+#define IRQ_MCU_MODE_MASK               0x1f
-+#define IRQ_MCU_MODE_MASK_SFT           (0x1f << 4)
-+#define IRQ_MCU_ON_SFT                  0
-+#define IRQ_MCU_ON_MASK                 0x1
-+#define IRQ_MCU_ON_MASK_SFT             BIT(0)
-+#define IRQ0_MCU_CLR_SFT                0
-+#define IRQ0_MCU_CLR_MASK               0x1
-+#define IRQ0_MCU_CLR_MASK_SFT           BIT(0)
-+#define IRQ1_MCU_CLR_SFT                1
-+#define IRQ1_MCU_CLR_MASK               0x1
-+#define IRQ1_MCU_CLR_MASK_SFT           BIT(1)
-+#define IRQ2_MCU_CLR_SFT                2
-+#define IRQ2_MCU_CLR_MASK               0x1
-+#define IRQ2_MCU_CLR_MASK_SFT           BIT(2)
-+
-+/* ETDM_IN5_CON2 */
-+#define IN_CLK_SRC(x)                   ((x) << 10)
-+#define IN_CLK_SRC_SFT                  10
-+#define IN_CLK_SRC_MASK                 GENMASK(12, 10)
-+
-+/* ETDM_IN5_CON3 */
-+#define IN_SEL_FS(x)                    ((x) << 26)
-+#define IN_SEL_FS_SFT                   26
-+#define IN_SEL_FS_MASK                  GENMASK(30, 26)
-+
-+/* ETDM_IN5_CON4 */
-+#define IN_RELATCH(x)                   ((x) << 20)
-+#define IN_RELATCH_SFT                  20
-+#define IN_RELATCH_MASK                 GENMASK(24, 20)
-+#define IN_CLK_INV                      BIT(18)
-+#define IN_CLK_INV_MASK                 BIT(18)
-+
-+/* ETDM_IN5_CON0 & ETDM_OUT5_CON0 */
-+#define RELATCH_SRC_MASK                GENMASK(30, 28)
-+#define ETDM_CH_NUM_MASK                GENMASK(27, 23)
-+#define ETDM_WRD_LEN_MASK               GENMASK(20, 16)
-+#define ETDM_BIT_LEN_MASK               GENMASK(15, 11)
-+#define ETDM_FMT_MASK                   GENMASK(8, 6)
-+#define ETDM_SYNC                       BIT(1)
-+#define ETDM_SYNC_MASK                  BIT(1)
-+#define ETDM_EN                         BIT(0)
-+#define ETDM_EN_MASK                    BIT(0)
-+
-+/* ETDM_OUT5_CON4 */
-+#define OUT_RELATCH(x)                  ((x) << 24)
-+#define OUT_RELATCH_SFT                 24
-+#define OUT_RELATCH_MASK                GENMASK(28, 24)
-+#define OUT_CLK_SRC(x)                  ((x) << 6)
-+#define OUT_CLK_SRC_SFT                 6
-+#define OUT_CLK_SRC_MASK                GENMASK(8, 6)
-+#define OUT_SEL_FS(x)                   (x)
-+#define OUT_SEL_FS_SFT                  0
-+#define OUT_SEL_FS_MASK                 GENMASK(4, 0)
-+
-+/* ETDM_OUT5_CON5 */
-+#define ETDM_CLK_DIV                    BIT(12)
-+#define ETDM_CLK_DIV_MASK               BIT(12)
-+#define OUT_CLK_INV                     BIT(9)
-+#define OUT_CLK_INV_MASK                BIT(9)
-+
-+/* ETDM_4_7_COWORK_CON0 */
-+#define OUT_SEL(x)                      ((x) << 12)
-+#define OUT_SEL_SFT                     12
-+#define OUT_SEL_MASK                    GENMASK(15, 12)
-+#endif
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch b/target/linux/mediatek/patches-6.6/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch
deleted file mode 100644 (file)
index f22add5..0000000
+++ /dev/null
@@ -1,430 +0,0 @@
-From 948a288897015fb3ee63b3f720b396b590c17fd7 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:34 +0800
-Subject: [PATCH 2/9] ASoC: mediatek: mt7986: support etdm in platform driver
-
-Add mt7986 etdm dai driver support.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-3-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt7986/mt7986-dai-etdm.c | 411 ++++++++++++++++++++
- 1 file changed, 411 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-dai-etdm.c
-
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-dai-etdm.c
-@@ -0,0 +1,411 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek ALSA SoC Audio DAI eTDM Control
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ *          Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/bitfield.h>
-+#include <linux/bitops.h>
-+#include <linux/regmap.h>
-+#include <sound/pcm_params.h>
-+#include "mt7986-afe-common.h"
-+#include "mt7986-reg.h"
-+
-+#define HOPPING_CLK  0
-+#define APLL_CLK     1
-+#define MTK_DAI_ETDM_FORMAT_I2S   0
-+#define MTK_DAI_ETDM_FORMAT_DSPA  4
-+#define MTK_DAI_ETDM_FORMAT_DSPB  5
-+
-+enum {
-+      MTK_ETDM_RATE_8K = 0,
-+      MTK_ETDM_RATE_12K = 1,
-+      MTK_ETDM_RATE_16K = 2,
-+      MTK_ETDM_RATE_24K = 3,
-+      MTK_ETDM_RATE_32K = 4,
-+      MTK_ETDM_RATE_48K = 5,
-+      MTK_ETDM_RATE_96K = 7,
-+      MTK_ETDM_RATE_192K = 9,
-+      MTK_ETDM_RATE_11K = 16,
-+      MTK_ETDM_RATE_22K = 17,
-+      MTK_ETDM_RATE_44K = 18,
-+      MTK_ETDM_RATE_88K = 19,
-+      MTK_ETDM_RATE_176K = 20,
-+};
-+
-+struct mtk_dai_etdm_priv {
-+      bool bck_inv;
-+      bool lrck_inv;
-+      bool slave_mode;
-+      unsigned int format;
-+};
-+
-+static unsigned int mt7986_etdm_rate_transform(struct device *dev, unsigned int rate)
-+{
-+      switch (rate) {
-+      case 8000:
-+              return MTK_ETDM_RATE_8K;
-+      case 11025:
-+              return MTK_ETDM_RATE_11K;
-+      case 12000:
-+              return MTK_ETDM_RATE_12K;
-+      case 16000:
-+              return MTK_ETDM_RATE_16K;
-+      case 22050:
-+              return MTK_ETDM_RATE_22K;
-+      case 24000:
-+              return MTK_ETDM_RATE_24K;
-+      case 32000:
-+              return MTK_ETDM_RATE_32K;
-+      case 44100:
-+              return MTK_ETDM_RATE_44K;
-+      case 48000:
-+              return MTK_ETDM_RATE_48K;
-+      case 88200:
-+              return MTK_ETDM_RATE_88K;
-+      case 96000:
-+              return MTK_ETDM_RATE_96K;
-+      case 176400:
-+              return MTK_ETDM_RATE_176K;
-+      case 192000:
-+              return MTK_ETDM_RATE_192K;
-+      default:
-+              dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n",
-+                       __func__, rate, MTK_ETDM_RATE_48K);
-+              return MTK_ETDM_RATE_48K;
-+      }
-+}
-+
-+static int get_etdm_wlen(unsigned int bitwidth)
-+{
-+      return bitwidth <= 16 ? 16 : 32;
-+}
-+
-+/* dai component */
-+/* interconnection */
-+
-+static const struct snd_kcontrol_new o124_mix[] = {
-+      SOC_DAPM_SINGLE_AUTODISABLE("I032_Switch", AFE_CONN124_1, 0, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new o125_mix[] = {
-+      SOC_DAPM_SINGLE_AUTODISABLE("I033_Switch", AFE_CONN125_1, 1, 1, 0),
-+};
-+
-+static const struct snd_soc_dapm_widget mtk_dai_etdm_widgets[] = {
-+
-+      /* DL */
-+      SND_SOC_DAPM_MIXER("I150", SND_SOC_NOPM, 0, 0, NULL, 0),
-+      SND_SOC_DAPM_MIXER("I151", SND_SOC_NOPM, 0, 0, NULL, 0),
-+      /* UL */
-+      SND_SOC_DAPM_MIXER("O124", SND_SOC_NOPM, 0, 0, o124_mix, ARRAY_SIZE(o124_mix)),
-+      SND_SOC_DAPM_MIXER("O125", SND_SOC_NOPM, 0, 0, o125_mix, ARRAY_SIZE(o125_mix)),
-+};
-+
-+static const struct snd_soc_dapm_route mtk_dai_etdm_routes[] = {
-+      {"I150", NULL, "ETDM Capture"},
-+      {"I151", NULL, "ETDM Capture"},
-+      {"ETDM Playback", NULL, "O124"},
-+      {"ETDM Playback", NULL, "O125"},
-+      {"O124", "I032_Switch", "I032"},
-+      {"O125", "I033_Switch", "I033"},
-+};
-+
-+/* dai ops */
-+static int mtk_dai_etdm_startup(struct snd_pcm_substream *substream,
-+                              struct snd_soc_dai *dai)
-+{
-+      struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+      int ret;
-+
-+      ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks);
-+      if (ret)
-+              return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n");
-+
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK, 0);
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK, 0);
-+
-+      return 0;
-+}
-+
-+static void mtk_dai_etdm_shutdown(struct snd_pcm_substream *substream,
-+                                struct snd_soc_dai *dai)
-+{
-+      struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK,
-+                         CLK_OUT5_PDN);
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK,
-+                         CLK_IN5_PDN);
-+
-+      clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks);
-+}
-+
-+static unsigned int get_etdm_ch_fixup(unsigned int channels)
-+{
-+      if (channels > 16)
-+              return 24;
-+      else if (channels > 8)
-+              return 16;
-+      else if (channels > 4)
-+              return 8;
-+      else if (channels > 2)
-+              return 4;
-+      else
-+              return 2;
-+}
-+
-+static int mtk_dai_etdm_config(struct mtk_base_afe *afe,
-+                             struct snd_pcm_hw_params *params,
-+                             struct snd_soc_dai *dai,
-+                             int stream)
-+{
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+      struct mtk_dai_etdm_priv *etdm_data = afe_priv->dai_priv[dai->id];
-+      unsigned int rate = params_rate(params);
-+      unsigned int etdm_rate = mt7986_etdm_rate_transform(afe->dev, rate);
-+      unsigned int afe_rate = mt7986_afe_rate_transform(afe->dev, rate);
-+      unsigned int channels = params_channels(params);
-+      unsigned int bit_width = params_width(params);
-+      unsigned int wlen = get_etdm_wlen(bit_width);
-+      unsigned int val = 0;
-+      unsigned int mask = 0;
-+
-+      dev_dbg(afe->dev, "%s(), stream %d, rate %u, bitwidth %u\n",
-+               __func__, stream, rate, bit_width);
-+
-+      /* CON0 */
-+      mask |= ETDM_BIT_LEN_MASK;
-+      val |= FIELD_PREP(ETDM_BIT_LEN_MASK, bit_width - 1);
-+      mask |= ETDM_WRD_LEN_MASK;
-+      val |= FIELD_PREP(ETDM_WRD_LEN_MASK, wlen - 1);
-+      mask |= ETDM_FMT_MASK;
-+      val |= FIELD_PREP(ETDM_FMT_MASK, etdm_data->format);
-+      mask |= ETDM_CH_NUM_MASK;
-+      val |= FIELD_PREP(ETDM_CH_NUM_MASK, get_etdm_ch_fixup(channels) - 1);
-+      mask |= RELATCH_SRC_MASK;
-+      val |= FIELD_PREP(RELATCH_SRC_MASK, APLL_CLK);
-+
-+      switch (stream) {
-+      case SNDRV_PCM_STREAM_PLAYBACK:
-+              /* set ETDM_OUT5_CON0 */
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, mask, val);
-+
-+              /* set ETDM_OUT5_CON4 */
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+                                 OUT_RELATCH_MASK, OUT_RELATCH(afe_rate));
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+                                 OUT_CLK_SRC_MASK, OUT_CLK_SRC(APLL_CLK));
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+                                 OUT_SEL_FS_MASK, OUT_SEL_FS(etdm_rate));
-+
-+              /* set ETDM_OUT5_CON5 */
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON5,
-+                                 ETDM_CLK_DIV_MASK, ETDM_CLK_DIV);
-+              break;
-+      case SNDRV_PCM_STREAM_CAPTURE:
-+              /* set ETDM_IN5_CON0 */
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON0, mask, val);
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON0,
-+                                 ETDM_SYNC_MASK, ETDM_SYNC);
-+
-+              /* set ETDM_IN5_CON2 */
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON2,
-+                                 IN_CLK_SRC_MASK, IN_CLK_SRC(APLL_CLK));
-+
-+              /* set ETDM_IN5_CON3 */
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON3,
-+                                 IN_SEL_FS_MASK, IN_SEL_FS(etdm_rate));
-+
-+              /* set ETDM_IN5_CON4 */
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON4,
-+                                 IN_RELATCH_MASK, IN_RELATCH(afe_rate));
-+              break;
-+      default:
-+              break;
-+      }
-+
-+      return 0;
-+}
-+
-+static int mtk_dai_etdm_hw_params(struct snd_pcm_substream *substream,
-+                                struct snd_pcm_hw_params *params,
-+                                struct snd_soc_dai *dai)
-+{
-+      struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+
-+      mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_PLAYBACK);
-+      mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_CAPTURE);
-+
-+      return 0;
-+}
-+
-+static int mtk_dai_etdm_trigger(struct snd_pcm_substream *substream, int cmd,
-+                              struct snd_soc_dai *dai)
-+{
-+      struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+
-+      dev_dbg(afe->dev, "%s(), cmd %d, dai id %d\n", __func__, cmd, dai->id);
-+      switch (cmd) {
-+      case SNDRV_PCM_TRIGGER_START:
-+      case SNDRV_PCM_TRIGGER_RESUME:
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK,
-+                                 ETDM_EN);
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK,
-+                                 ETDM_EN);
-+              break;
-+      case SNDRV_PCM_TRIGGER_STOP:
-+      case SNDRV_PCM_TRIGGER_SUSPEND:
-+              regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK,
-+                                 0);
-+              regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK,
-+                                 0);
-+              break;
-+      default:
-+              break;
-+      }
-+
-+      return 0;
-+}
-+
-+static int mtk_dai_etdm_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+      struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+      struct mtk_dai_etdm_priv *etdm_data;
-+      void *priv_data;
-+
-+      switch (dai->id) {
-+      case MT7986_DAI_ETDM:
-+              break;
-+      default:
-+              dev_warn(afe->dev, "%s(), id %d not support\n",
-+                       __func__, dai->id);
-+              return -EINVAL;
-+      }
-+
-+      priv_data = devm_kzalloc(afe->dev, sizeof(struct mtk_dai_etdm_priv),
-+                               GFP_KERNEL);
-+      if (!priv_data)
-+              return -ENOMEM;
-+
-+      afe_priv->dai_priv[dai->id] = priv_data;
-+      etdm_data = afe_priv->dai_priv[dai->id];
-+
-+      switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+      case SND_SOC_DAIFMT_I2S:
-+              etdm_data->format = MTK_DAI_ETDM_FORMAT_I2S;
-+              break;
-+      case SND_SOC_DAIFMT_DSP_A:
-+              etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPA;
-+              break;
-+      case SND_SOC_DAIFMT_DSP_B:
-+              etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPB;
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+      switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+      case SND_SOC_DAIFMT_NB_NF:
-+              etdm_data->bck_inv = false;
-+              etdm_data->lrck_inv = false;
-+              break;
-+      case SND_SOC_DAIFMT_NB_IF:
-+              etdm_data->bck_inv = false;
-+              etdm_data->lrck_inv = true;
-+              break;
-+      case SND_SOC_DAIFMT_IB_NF:
-+              etdm_data->bck_inv = true;
-+              etdm_data->lrck_inv = false;
-+              break;
-+      case SND_SOC_DAIFMT_IB_IF:
-+              etdm_data->bck_inv = true;
-+              etdm_data->lrck_inv = true;
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+      switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+      case SND_SOC_DAIFMT_CBM_CFM:
-+              etdm_data->slave_mode = true;
-+              break;
-+      case SND_SOC_DAIFMT_CBS_CFS:
-+              etdm_data->slave_mode = false;
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+      return 0;
-+}
-+
-+static const struct snd_soc_dai_ops mtk_dai_etdm_ops = {
-+      .startup = mtk_dai_etdm_startup,
-+      .shutdown = mtk_dai_etdm_shutdown,
-+      .hw_params = mtk_dai_etdm_hw_params,
-+      .trigger = mtk_dai_etdm_trigger,
-+      .set_fmt = mtk_dai_etdm_set_fmt,
-+};
-+
-+/* dai driver */
-+#define MTK_ETDM_RATES (SNDRV_PCM_RATE_8000_48000 |\
-+                      SNDRV_PCM_RATE_88200 |\
-+                      SNDRV_PCM_RATE_96000 |\
-+                      SNDRV_PCM_RATE_176400 |\
-+                      SNDRV_PCM_RATE_192000)
-+
-+#define MTK_ETDM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-+                        SNDRV_PCM_FMTBIT_S24_LE |\
-+                        SNDRV_PCM_FMTBIT_S32_LE)
-+
-+static struct snd_soc_dai_driver mtk_dai_etdm_driver[] = {
-+      {
-+              .name = "ETDM",
-+              .id = MT7986_DAI_ETDM,
-+              .capture = {
-+                      .stream_name = "ETDM Capture",
-+                      .channels_min = 1,
-+                      .channels_max = 2,
-+                      .rates = MTK_ETDM_RATES,
-+                      .formats = MTK_ETDM_FORMATS,
-+              },
-+              .playback = {
-+                      .stream_name = "ETDM Playback",
-+                      .channels_min = 1,
-+                      .channels_max = 2,
-+                      .rates = MTK_ETDM_RATES,
-+                      .formats = MTK_ETDM_FORMATS,
-+              },
-+              .ops = &mtk_dai_etdm_ops,
-+              .symmetric_rate = 1,
-+              .symmetric_sample_bits = 1,
-+      },
-+};
-+
-+int mt7986_dai_etdm_register(struct mtk_base_afe *afe)
-+{
-+      struct mtk_base_afe_dai *dai;
-+
-+      dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL);
-+      if (!dai)
-+              return -ENOMEM;
-+
-+      list_add(&dai->list, &afe->sub_dais);
-+
-+      dai->dai_drivers = mtk_dai_etdm_driver;
-+      dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_etdm_driver);
-+
-+      dai->dapm_widgets = mtk_dai_etdm_widgets;
-+      dai->num_dapm_widgets = ARRAY_SIZE(mtk_dai_etdm_widgets);
-+      dai->dapm_routes = mtk_dai_etdm_routes;
-+      dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_etdm_routes);
-+
-+      return 0;
-+}
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch b/target/linux/mediatek/patches-6.6/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch
deleted file mode 100644 (file)
index b899b96..0000000
+++ /dev/null
@@ -1,685 +0,0 @@
-From fc7776dee86bc07d22820a904760a95f49a2f12e Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:35 +0800
-Subject: [PATCH 3/9] ASoC: mediatek: mt7986: add platform driver
-
-Add mt7986 platform driver.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-4-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/Kconfig                 |  10 +
- sound/soc/mediatek/Makefile                |   1 +
- sound/soc/mediatek/mt7986/Makefile         |   8 +
- sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 622 +++++++++++++++++++++
- 4 files changed, 641 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/Makefile
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-pcm.c
-
---- a/sound/soc/mediatek/Kconfig
-+++ b/sound/soc/mediatek/Kconfig
-@@ -54,6 +54,16 @@ config SND_SOC_MT6797_MT6351
-         Select Y if you have such device.
-         If unsure select "N".
-+config SND_SOC_MT7986
-+      tristate "ASoC support for Mediatek MT7986 chip"
-+      depends on ARCH_MEDIATEK
-+      select SND_SOC_MEDIATEK
-+      help
-+        This adds ASoC platform driver support for MediaTek MT7986 chip
-+        that can be used with other codecs.
-+        Select Y if you have such device.
-+        If unsure select "N".
-+
- config SND_SOC_MT8173
-       tristate "ASoC support for Mediatek MT8173 chip"
-       depends on ARCH_MEDIATEK
---- a/sound/soc/mediatek/Makefile
-+++ b/sound/soc/mediatek/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_SND_SOC_MEDIATEK) += common/
- obj-$(CONFIG_SND_SOC_MT2701) += mt2701/
- obj-$(CONFIG_SND_SOC_MT6797) += mt6797/
-+obj-$(CONFIG_SND_SOC_MT7986) += mt7986/
- obj-$(CONFIG_SND_SOC_MT8173) += mt8173/
- obj-$(CONFIG_SND_SOC_MT8183) += mt8183/
- obj-$(CONFIG_SND_SOC_MT8186) += mt8186/
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/Makefile
-@@ -0,0 +1,8 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+# platform driver
-+snd-soc-mt7986-afe-objs := \
-+      mt7986-afe-pcm.o \
-+      mt7986-dai-etdm.o
-+
-+obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-afe-pcm.c
-@@ -0,0 +1,622 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek ALSA SoC AFE platform driver for MT7986
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ *          Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/pm_runtime.h>
-+
-+#include "mt7986-afe-common.h"
-+#include "mt7986-reg.h"
-+#include "../common/mtk-afe-platform-driver.h"
-+#include "../common/mtk-afe-fe-dai.h"
-+
-+enum {
-+      MTK_AFE_RATE_8K = 0,
-+      MTK_AFE_RATE_11K = 1,
-+      MTK_AFE_RATE_12K = 2,
-+      MTK_AFE_RATE_16K = 4,
-+      MTK_AFE_RATE_22K = 5,
-+      MTK_AFE_RATE_24K = 6,
-+      MTK_AFE_RATE_32K = 8,
-+      MTK_AFE_RATE_44K = 9,
-+      MTK_AFE_RATE_48K = 10,
-+      MTK_AFE_RATE_88K = 13,
-+      MTK_AFE_RATE_96K = 14,
-+      MTK_AFE_RATE_176K = 17,
-+      MTK_AFE_RATE_192K = 18,
-+};
-+
-+enum {
-+      CLK_INFRA_AUD_BUS_CK = 0,
-+      CLK_INFRA_AUD_26M_CK,
-+      CLK_INFRA_AUD_L_CK,
-+      CLK_INFRA_AUD_AUD_CK,
-+      CLK_INFRA_AUD_EG2_CK,
-+      CLK_NUM
-+};
-+
-+static const char *aud_clks[CLK_NUM] = {
-+      [CLK_INFRA_AUD_BUS_CK] = "aud_bus_ck",
-+      [CLK_INFRA_AUD_26M_CK] = "aud_26m_ck",
-+      [CLK_INFRA_AUD_L_CK] = "aud_l_ck",
-+      [CLK_INFRA_AUD_AUD_CK] = "aud_aud_ck",
-+      [CLK_INFRA_AUD_EG2_CK] = "aud_eg2_ck",
-+};
-+
-+unsigned int mt7986_afe_rate_transform(struct device *dev, unsigned int rate)
-+{
-+      switch (rate) {
-+      case 8000:
-+              return MTK_AFE_RATE_8K;
-+      case 11025:
-+              return MTK_AFE_RATE_11K;
-+      case 12000:
-+              return MTK_AFE_RATE_12K;
-+      case 16000:
-+              return MTK_AFE_RATE_16K;
-+      case 22050:
-+              return MTK_AFE_RATE_22K;
-+      case 24000:
-+              return MTK_AFE_RATE_24K;
-+      case 32000:
-+              return MTK_AFE_RATE_32K;
-+      case 44100:
-+              return MTK_AFE_RATE_44K;
-+      case 48000:
-+              return MTK_AFE_RATE_48K;
-+      case 88200:
-+              return MTK_AFE_RATE_88K;
-+      case 96000:
-+              return MTK_AFE_RATE_96K;
-+      case 176400:
-+              return MTK_AFE_RATE_176K;
-+      case 192000:
-+              return MTK_AFE_RATE_192K;
-+      default:
-+              dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n",
-+                       __func__, rate, MTK_AFE_RATE_48K);
-+              return MTK_AFE_RATE_48K;
-+      }
-+}
-+
-+static const struct snd_pcm_hardware mt7986_afe_hardware = {
-+      .info = SNDRV_PCM_INFO_MMAP |
-+              SNDRV_PCM_INFO_INTERLEAVED |
-+              SNDRV_PCM_INFO_MMAP_VALID,
-+      .formats = SNDRV_PCM_FMTBIT_S16_LE |
-+                 SNDRV_PCM_FMTBIT_S24_LE |
-+                 SNDRV_PCM_FMTBIT_S32_LE,
-+      .period_bytes_min = 256,
-+      .period_bytes_max = 4 * 48 * 1024,
-+      .periods_min = 2,
-+      .periods_max = 256,
-+      .buffer_bytes_max = 8 * 48 * 1024,
-+      .fifo_size = 0,
-+};
-+
-+static int mt7986_memif_fs(struct snd_pcm_substream *substream,
-+                         unsigned int rate)
-+{
-+      struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+      struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
-+      struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-+
-+      return mt7986_afe_rate_transform(afe->dev, rate);
-+}
-+
-+static int mt7986_irq_fs(struct snd_pcm_substream *substream,
-+                       unsigned int rate)
-+{
-+      struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+      struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
-+      struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-+
-+      return mt7986_afe_rate_transform(afe->dev, rate);
-+}
-+
-+#define MTK_PCM_RATES (SNDRV_PCM_RATE_8000_48000 |\
-+                     SNDRV_PCM_RATE_88200 |\
-+                     SNDRV_PCM_RATE_96000 |\
-+                     SNDRV_PCM_RATE_176400 |\
-+                     SNDRV_PCM_RATE_192000)
-+
-+#define MTK_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-+                       SNDRV_PCM_FMTBIT_S24_LE |\
-+                       SNDRV_PCM_FMTBIT_S32_LE)
-+
-+static struct snd_soc_dai_driver mt7986_memif_dai_driver[] = {
-+      /* FE DAIs: memory intefaces to CPU */
-+      {
-+              .name = "DL1",
-+              .id = MT7986_MEMIF_DL1,
-+              .playback = {
-+                      .stream_name = "DL1",
-+                      .channels_min = 1,
-+                      .channels_max = 2,
-+                      .rates = MTK_PCM_RATES,
-+                      .formats = MTK_PCM_FORMATS,
-+              },
-+              .ops = &mtk_afe_fe_ops,
-+      },
-+      {
-+              .name = "UL1",
-+              .id = MT7986_MEMIF_VUL12,
-+              .capture = {
-+                      .stream_name = "UL1",
-+                      .channels_min = 1,
-+                      .channels_max = 2,
-+                      .rates = MTK_PCM_RATES,
-+                      .formats = MTK_PCM_FORMATS,
-+              },
-+              .ops = &mtk_afe_fe_ops,
-+      },
-+};
-+
-+static const struct snd_kcontrol_new o018_mix[] = {
-+      SOC_DAPM_SINGLE_AUTODISABLE("I150_Switch", AFE_CONN018_4, 22, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new o019_mix[] = {
-+      SOC_DAPM_SINGLE_AUTODISABLE("I151_Switch", AFE_CONN019_4, 23, 1, 0),
-+};
-+
-+static const struct snd_soc_dapm_widget mt7986_memif_widgets[] = {
-+      /* DL */
-+      SND_SOC_DAPM_MIXER("I032", SND_SOC_NOPM, 0, 0, NULL, 0),
-+      SND_SOC_DAPM_MIXER("I033", SND_SOC_NOPM, 0, 0, NULL, 0),
-+
-+      /* UL */
-+      SND_SOC_DAPM_MIXER("O018", SND_SOC_NOPM, 0, 0,
-+                         o018_mix, ARRAY_SIZE(o018_mix)),
-+      SND_SOC_DAPM_MIXER("O019", SND_SOC_NOPM, 0, 0,
-+                         o019_mix, ARRAY_SIZE(o019_mix)),
-+};
-+
-+static const struct snd_soc_dapm_route mt7986_memif_routes[] = {
-+      {"I032", NULL, "DL1"},
-+      {"I033", NULL, "DL1"},
-+      {"UL1", NULL, "O018"},
-+      {"UL1", NULL, "O019"},
-+      {"O018", "I150_Switch", "I150"},
-+      {"O019", "I151_Switch", "I151"},
-+};
-+
-+static const struct snd_soc_component_driver mt7986_afe_pcm_dai_component = {
-+      .name = "mt7986-afe-pcm-dai",
-+};
-+
-+static const struct mtk_base_memif_data memif_data[MT7986_MEMIF_NUM] = {
-+      [MT7986_MEMIF_DL1] = {
-+              .name = "DL1",
-+              .id = MT7986_MEMIF_DL1,
-+              .reg_ofs_base = AFE_DL0_BASE,
-+              .reg_ofs_cur = AFE_DL0_CUR,
-+              .reg_ofs_end = AFE_DL0_END,
-+              .reg_ofs_base_msb = AFE_DL0_BASE_MSB,
-+              .reg_ofs_cur_msb = AFE_DL0_CUR_MSB,
-+              .reg_ofs_end_msb = AFE_DL0_END_MSB,
-+              .fs_reg = AFE_DL0_CON0,
-+              .fs_shift =  DL0_MODE_SFT,
-+              .fs_maskbit =  DL0_MODE_MASK,
-+              .mono_reg = AFE_DL0_CON0,
-+              .mono_shift = DL0_MONO_SFT,
-+              .enable_reg = AFE_DL0_CON0,
-+              .enable_shift = DL0_ON_SFT,
-+              .hd_reg = AFE_DL0_CON0,
-+              .hd_shift = DL0_HD_MODE_SFT,
-+              .hd_align_reg = AFE_DL0_CON0,
-+              .hd_align_mshift = DL0_HALIGN_SFT,
-+              .pbuf_reg = AFE_DL0_CON0,
-+              .pbuf_shift = DL0_PBUF_SIZE_SFT,
-+              .minlen_reg = AFE_DL0_CON0,
-+              .minlen_shift = DL0_MINLEN_SFT,
-+      },
-+      [MT7986_MEMIF_VUL12] = {
-+              .name = "VUL12",
-+              .id = MT7986_MEMIF_VUL12,
-+              .reg_ofs_base = AFE_VUL0_BASE,
-+              .reg_ofs_cur = AFE_VUL0_CUR,
-+              .reg_ofs_end = AFE_VUL0_END,
-+              .reg_ofs_base_msb = AFE_VUL0_BASE_MSB,
-+              .reg_ofs_cur_msb = AFE_VUL0_CUR_MSB,
-+              .reg_ofs_end_msb = AFE_VUL0_END_MSB,
-+              .fs_reg = AFE_VUL0_CON0,
-+              .fs_shift = VUL0_MODE_SFT,
-+              .fs_maskbit = VUL0_MODE_MASK,
-+              .mono_reg = AFE_VUL0_CON0,
-+              .mono_shift = VUL0_MONO_SFT,
-+              .enable_reg = AFE_VUL0_CON0,
-+              .enable_shift = VUL0_ON_SFT,
-+              .hd_reg = AFE_VUL0_CON0,
-+              .hd_shift = VUL0_HD_MODE_SFT,
-+              .hd_align_reg = AFE_VUL0_CON0,
-+              .hd_align_mshift = VUL0_HALIGN_SFT,
-+      },
-+};
-+
-+static const struct mtk_base_irq_data irq_data[MT7986_IRQ_NUM] = {
-+      [MT7986_IRQ_0] = {
-+              .id = MT7986_IRQ_0,
-+              .irq_cnt_reg = AFE_IRQ0_MCU_CFG1,
-+              .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+              .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+              .irq_fs_reg = AFE_IRQ0_MCU_CFG0,
-+              .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+              .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+              .irq_en_reg = AFE_IRQ0_MCU_CFG0,
-+              .irq_en_shift = IRQ_MCU_ON_SFT,
-+              .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+              .irq_clr_shift = IRQ0_MCU_CLR_SFT,
-+      },
-+      [MT7986_IRQ_1] = {
-+              .id = MT7986_IRQ_1,
-+              .irq_cnt_reg = AFE_IRQ1_MCU_CFG1,
-+              .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+              .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+              .irq_fs_reg = AFE_IRQ1_MCU_CFG0,
-+              .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+              .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+              .irq_en_reg = AFE_IRQ1_MCU_CFG0,
-+              .irq_en_shift = IRQ_MCU_ON_SFT,
-+              .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+              .irq_clr_shift = IRQ1_MCU_CLR_SFT,
-+      },
-+      [MT7986_IRQ_2] = {
-+              .id = MT7986_IRQ_2,
-+              .irq_cnt_reg = AFE_IRQ2_MCU_CFG1,
-+              .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+              .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+              .irq_fs_reg = AFE_IRQ2_MCU_CFG0,
-+              .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+              .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+              .irq_en_reg = AFE_IRQ2_MCU_CFG0,
-+              .irq_en_shift = IRQ_MCU_ON_SFT,
-+              .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+              .irq_clr_shift = IRQ2_MCU_CLR_SFT,
-+      },
-+};
-+
-+static bool mt7986_is_volatile_reg(struct device *dev, unsigned int reg)
-+{
-+      /*
-+       * Those auto-gen regs are read-only, so put it as volatile because
-+       * volatile registers cannot be cached, which means that they cannot
-+       * be set when power is off
-+       */
-+
-+      switch (reg) {
-+      case AFE_DL0_CUR_MSB:
-+      case AFE_DL0_CUR:
-+      case AFE_DL0_RCH_MON:
-+      case AFE_DL0_LCH_MON:
-+      case AFE_VUL0_CUR_MSB:
-+      case AFE_VUL0_CUR:
-+      case AFE_IRQ_MCU_STATUS:
-+      case AFE_MEMIF_RD_MON:
-+      case AFE_MEMIF_WR_MON:
-+              return true;
-+      default:
-+              return false;
-+      };
-+}
-+
-+static const struct regmap_config mt7986_afe_regmap_config = {
-+      .reg_bits = 32,
-+      .reg_stride = 4,
-+      .val_bits = 32,
-+      .volatile_reg = mt7986_is_volatile_reg,
-+      .max_register = AFE_MAX_REGISTER,
-+      .num_reg_defaults_raw = ((AFE_MAX_REGISTER / 4) + 1),
-+};
-+
-+static int mt7986_init_clock(struct mtk_base_afe *afe)
-+{
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+      int ret, i;
-+
-+      afe_priv->clks = devm_kcalloc(afe->dev, CLK_NUM,
-+                              sizeof(*afe_priv->clks), GFP_KERNEL);
-+      if (!afe_priv->clks)
-+              return -ENOMEM;
-+      afe_priv->num_clks = CLK_NUM;
-+
-+      for (i = 0; i < afe_priv->num_clks; i++)
-+              afe_priv->clks[i].id = aud_clks[i];
-+
-+      ret = devm_clk_bulk_get(afe->dev, afe_priv->num_clks, afe_priv->clks);
-+      if (ret)
-+              return dev_err_probe(afe->dev, ret, "Failed to get clocks\n");
-+
-+      return 0;
-+}
-+
-+static irqreturn_t mt7986_afe_irq_handler(int irq_id, void *dev)
-+{
-+      struct mtk_base_afe *afe = dev;
-+      struct mtk_base_afe_irq *irq;
-+      u32 mcu_en, status, status_mcu;
-+      int i, ret;
-+      irqreturn_t irq_ret = IRQ_HANDLED;
-+
-+      /* get irq that is sent to MCU */
-+      regmap_read(afe->regmap, AFE_IRQ_MCU_EN, &mcu_en);
-+
-+      ret = regmap_read(afe->regmap, AFE_IRQ_MCU_STATUS, &status);
-+      /* only care IRQ which is sent to MCU */
-+      status_mcu = status & mcu_en & AFE_IRQ_STATUS_BITS;
-+
-+      if (ret || status_mcu == 0) {
-+              dev_err(afe->dev, "%s(), irq status err, ret %d, status 0x%x, mcu_en 0x%x\n",
-+                      __func__, ret, status, mcu_en);
-+
-+              irq_ret = IRQ_NONE;
-+              goto err_irq;
-+      }
-+
-+      for (i = 0; i < MT7986_MEMIF_NUM; i++) {
-+              struct mtk_base_afe_memif *memif = &afe->memif[i];
-+
-+              if (!memif->substream)
-+                      continue;
-+
-+              if (memif->irq_usage < 0)
-+                      continue;
-+
-+              irq = &afe->irqs[memif->irq_usage];
-+
-+              if (status_mcu & (1 << irq->irq_data->irq_en_shift))
-+                      snd_pcm_period_elapsed(memif->substream);
-+      }
-+
-+err_irq:
-+      /* clear irq */
-+      regmap_write(afe->regmap, AFE_IRQ_MCU_CLR, status_mcu);
-+
-+      return irq_ret;
-+}
-+
-+static int mt7986_afe_runtime_suspend(struct device *dev)
-+{
-+      struct mtk_base_afe *afe = dev_get_drvdata(dev);
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+
-+      if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl)
-+              goto skip_regmap;
-+
-+      /* disable clk*/
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0x3fff);
-+      regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK, 0);
-+      regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK, 0);
-+
-+      /* make sure all irq status are cleared, twice intended */
-+      regmap_update_bits(afe->regmap, AFE_IRQ_MCU_CLR, 0xffff, 0xffff);
-+
-+skip_regmap:
-+      clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks);
-+
-+      return 0;
-+}
-+
-+static int mt7986_afe_runtime_resume(struct device *dev)
-+{
-+      struct mtk_base_afe *afe = dev_get_drvdata(dev);
-+      struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+      int ret;
-+
-+      ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks);
-+      if (ret)
-+              return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n");
-+
-+      if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl)
-+              return 0;
-+
-+      /* enable clk*/
-+      regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0);
-+      regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK,
-+                         AUD_APLL2_EN);
-+      regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK,
-+                         AUD_26M_EN);
-+
-+      return 0;
-+}
-+
-+static int mt7986_afe_component_probe(struct snd_soc_component *component)
-+{
-+      return mtk_afe_add_sub_dai_control(component);
-+}
-+
-+static const struct snd_soc_component_driver mt7986_afe_component = {
-+      .name = AFE_PCM_NAME,
-+      .probe = mt7986_afe_component_probe,
-+      .pointer        = mtk_afe_pcm_pointer,
-+      .pcm_construct  = mtk_afe_pcm_new,
-+};
-+
-+static int mt7986_dai_memif_register(struct mtk_base_afe *afe)
-+{
-+      struct mtk_base_afe_dai *dai;
-+
-+      dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL);
-+      if (!dai)
-+              return -ENOMEM;
-+
-+      list_add(&dai->list, &afe->sub_dais);
-+
-+      dai->dai_drivers = mt7986_memif_dai_driver;
-+      dai->num_dai_drivers = ARRAY_SIZE(mt7986_memif_dai_driver);
-+
-+      dai->dapm_widgets = mt7986_memif_widgets;
-+      dai->num_dapm_widgets = ARRAY_SIZE(mt7986_memif_widgets);
-+      dai->dapm_routes = mt7986_memif_routes;
-+      dai->num_dapm_routes = ARRAY_SIZE(mt7986_memif_routes);
-+
-+      return 0;
-+}
-+
-+typedef int (*dai_register_cb)(struct mtk_base_afe *);
-+static const dai_register_cb dai_register_cbs[] = {
-+      mt7986_dai_etdm_register,
-+      mt7986_dai_memif_register,
-+};
-+
-+static int mt7986_afe_pcm_dev_probe(struct platform_device *pdev)
-+{
-+      struct mtk_base_afe *afe;
-+      struct mt7986_afe_private *afe_priv;
-+      struct device *dev;
-+      int i, irq_id, ret;
-+
-+      afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL);
-+      if (!afe)
-+              return -ENOMEM;
-+      platform_set_drvdata(pdev, afe);
-+
-+      afe->platform_priv = devm_kzalloc(&pdev->dev, sizeof(*afe_priv),
-+                                        GFP_KERNEL);
-+      if (!afe->platform_priv)
-+              return -ENOMEM;
-+
-+      afe_priv = afe->platform_priv;
-+      afe->dev = &pdev->dev;
-+      dev = afe->dev;
-+
-+      afe->base_addr = devm_platform_ioremap_resource(pdev, 0);
-+      if (IS_ERR(afe->base_addr))
-+              return PTR_ERR(afe->base_addr);
-+
-+      /* initial audio related clock */
-+      ret = mt7986_init_clock(afe);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Cannot initialize clocks\n");
-+
-+      ret = devm_pm_runtime_enable(dev);
-+      if (ret)
-+              return ret;
-+
-+      /* enable clock for regcache get default value from hw */
-+      afe_priv->pm_runtime_bypass_reg_ctl = true;
-+      pm_runtime_get_sync(&pdev->dev);
-+
-+      afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
-+                    &mt7986_afe_regmap_config);
-+
-+      pm_runtime_put_sync(&pdev->dev);
-+      if (IS_ERR(afe->regmap))
-+              return PTR_ERR(afe->regmap);
-+
-+      afe_priv->pm_runtime_bypass_reg_ctl = false;
-+
-+      /* init memif */
-+      afe->memif_size = MT7986_MEMIF_NUM;
-+      afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif),
-+                                GFP_KERNEL);
-+      if (!afe->memif)
-+              return -ENOMEM;
-+
-+      for (i = 0; i < afe->memif_size; i++) {
-+              afe->memif[i].data = &memif_data[i];
-+              afe->memif[i].irq_usage = -1;
-+      }
-+
-+      mutex_init(&afe->irq_alloc_lock);
-+
-+      /* irq initialize */
-+      afe->irqs_size = MT7986_IRQ_NUM;
-+      afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs),
-+                               GFP_KERNEL);
-+      if (!afe->irqs)
-+              return -ENOMEM;
-+
-+      for (i = 0; i < afe->irqs_size; i++)
-+              afe->irqs[i].irq_data = &irq_data[i];
-+
-+      /* request irq */
-+      irq_id = platform_get_irq(pdev, 0);
-+      if (irq_id < 0) {
-+              ret = irq_id;
-+              return dev_err_probe(dev, ret, "No irq found\n");
-+      }
-+      ret = devm_request_irq(dev, irq_id, mt7986_afe_irq_handler,
-+                             IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Failed to request irq for asys-isr\n");
-+
-+      /* init sub_dais */
-+      INIT_LIST_HEAD(&afe->sub_dais);
-+
-+      for (i = 0; i < ARRAY_SIZE(dai_register_cbs); i++) {
-+              ret = dai_register_cbs[i](afe);
-+              if (ret)
-+                      return dev_err_probe(dev, ret, "DAI register failed, i: %d\n", i);
-+      }
-+
-+      /* init dai_driver and component_driver */
-+      ret = mtk_afe_combine_sub_dai(afe);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "mtk_afe_combine_sub_dai fail\n");
-+
-+      afe->mtk_afe_hardware = &mt7986_afe_hardware;
-+      afe->memif_fs = mt7986_memif_fs;
-+      afe->irq_fs = mt7986_irq_fs;
-+
-+      afe->runtime_resume = mt7986_afe_runtime_resume;
-+      afe->runtime_suspend = mt7986_afe_runtime_suspend;
-+
-+      /* register component */
-+      ret = devm_snd_soc_register_component(&pdev->dev,
-+                                            &mt7986_afe_component,
-+                                            NULL, 0);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Cannot register AFE component\n");
-+
-+      ret = devm_snd_soc_register_component(afe->dev,
-+                                            &mt7986_afe_pcm_dai_component,
-+                                            afe->dai_drivers,
-+                                            afe->num_dai_drivers);
-+      if (ret)
-+              return dev_err_probe(dev, ret, "Cannot register PCM DAI component\n");
-+
-+      return 0;
-+}
-+
-+static void mt7986_afe_pcm_dev_remove(struct platform_device *pdev)
-+{
-+      pm_runtime_disable(&pdev->dev);
-+      if (!pm_runtime_status_suspended(&pdev->dev))
-+              mt7986_afe_runtime_suspend(&pdev->dev);
-+}
-+
-+static const struct of_device_id mt7986_afe_pcm_dt_match[] = {
-+      { .compatible = "mediatek,mt7986-afe" },
-+      { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mt7986_afe_pcm_dt_match);
-+
-+static const struct dev_pm_ops mt7986_afe_pm_ops = {
-+      SET_RUNTIME_PM_OPS(mt7986_afe_runtime_suspend,
-+                         mt7986_afe_runtime_resume, NULL)
-+};
-+
-+static struct platform_driver mt7986_afe_pcm_driver = {
-+      .driver = {
-+                 .name = "mt7986-audio",
-+                 .of_match_table = mt7986_afe_pcm_dt_match,
-+                 .pm = &mt7986_afe_pm_ops,
-+      },
-+      .probe = mt7986_afe_pcm_dev_probe,
-+      .remove_new = mt7986_afe_pcm_dev_remove,
-+};
-+module_platform_driver(mt7986_afe_pcm_driver);
-+
-+MODULE_DESCRIPTION("MediaTek SoC AFE platform driver for ALSA MT7986");
-+MODULE_AUTHOR("Vic Wu <vic.wu@mediatek.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch b/target/linux/mediatek/patches-6.6/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch
deleted file mode 100644 (file)
index dd354c0..0000000
+++ /dev/null
@@ -1,243 +0,0 @@
-From ddf6abc1c78072f8ccad59166be95f0ca5af8ca4 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:36 +0800
-Subject: [PATCH 4/9] ASoC: mediatek: mt7986: add machine driver with wm8960
-
-Add support for mt7986 board with wm8960.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-5-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/Kconfig                |  10 ++
- sound/soc/mediatek/mt7986/Makefile        |   1 +
- sound/soc/mediatek/mt7986/mt7986-wm8960.c | 196 ++++++++++++++++++++++
- 3 files changed, 207 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-wm8960.c
-
---- a/sound/soc/mediatek/Kconfig
-+++ b/sound/soc/mediatek/Kconfig
-@@ -64,6 +64,16 @@ config SND_SOC_MT7986
-         Select Y if you have such device.
-         If unsure select "N".
-+config SND_SOC_MT7986_WM8960
-+      tristate "ASoc Audio driver for MT7986 with WM8960 codec"
-+      depends on SND_SOC_MT7986 && I2C
-+      select SND_SOC_WM8960
-+      help
-+        This adds support for ASoC machine driver for MediaTek MT7986
-+        boards with the WM8960 codecs.
-+        Select Y if you have such device.
-+        If unsure select "N".
-+
- config SND_SOC_MT8173
-       tristate "ASoC support for Mediatek MT8173 chip"
-       depends on ARCH_MEDIATEK
---- a/sound/soc/mediatek/mt7986/Makefile
-+++ b/sound/soc/mediatek/mt7986/Makefile
-@@ -6,3 +6,4 @@ snd-soc-mt7986-afe-objs := \
-       mt7986-dai-etdm.o
- obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o
-+obj-$(CONFIG_SND_SOC_MT7986_WM8960) += mt7986-wm8960.o
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c
-@@ -0,0 +1,196 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * mt7986-wm8960.c  --  MT7986-WM8960 ALSA SoC machine driver
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ *          Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <sound/soc.h>
-+
-+#include "mt7986-afe-common.h"
-+
-+struct mt7986_wm8960_priv {
-+      struct device_node *platform_node;
-+      struct device_node *codec_node;
-+};
-+
-+static const struct snd_soc_dapm_widget mt7986_wm8960_widgets[] = {
-+      SND_SOC_DAPM_HP("Headphone", NULL),
-+      SND_SOC_DAPM_MIC("AMIC", NULL),
-+};
-+
-+static const struct snd_kcontrol_new mt7986_wm8960_controls[] = {
-+      SOC_DAPM_PIN_SWITCH("Headphone"),
-+      SOC_DAPM_PIN_SWITCH("AMIC"),
-+};
-+
-+SND_SOC_DAILINK_DEFS(playback,
-+      DAILINK_COMP_ARRAY(COMP_CPU("DL1")),
-+      DAILINK_COMP_ARRAY(COMP_DUMMY()),
-+      DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+SND_SOC_DAILINK_DEFS(capture,
-+      DAILINK_COMP_ARRAY(COMP_CPU("UL1")),
-+      DAILINK_COMP_ARRAY(COMP_DUMMY()),
-+      DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+SND_SOC_DAILINK_DEFS(codec,
-+      DAILINK_COMP_ARRAY(COMP_CPU("ETDM")),
-+      DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8960-hifi")),
-+      DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+static struct snd_soc_dai_link mt7986_wm8960_dai_links[] = {
-+      /* FE */
-+      {
-+              .name = "wm8960-playback",
-+              .stream_name = "wm8960-playback",
-+              .trigger = {SND_SOC_DPCM_TRIGGER_POST,
-+                          SND_SOC_DPCM_TRIGGER_POST},
-+              .dynamic = 1,
-+              .dpcm_playback = 1,
-+              SND_SOC_DAILINK_REG(playback),
-+      },
-+      {
-+              .name = "wm8960-capture",
-+              .stream_name = "wm8960-capture",
-+              .trigger = {SND_SOC_DPCM_TRIGGER_POST,
-+                          SND_SOC_DPCM_TRIGGER_POST},
-+              .dynamic = 1,
-+              .dpcm_capture = 1,
-+              SND_SOC_DAILINK_REG(capture),
-+      },
-+      /* BE */
-+      {
-+              .name = "wm8960-codec",
-+              .no_pcm = 1,
-+              .dai_fmt = SND_SOC_DAIFMT_I2S |
-+                      SND_SOC_DAIFMT_NB_NF |
-+                      SND_SOC_DAIFMT_CBS_CFS |
-+                      SND_SOC_DAIFMT_GATED,
-+              .dpcm_playback = 1,
-+              .dpcm_capture = 1,
-+              SND_SOC_DAILINK_REG(codec),
-+      },
-+};
-+
-+static struct snd_soc_card mt7986_wm8960_card = {
-+      .name = "mt7986-wm8960",
-+      .owner = THIS_MODULE,
-+      .dai_link = mt7986_wm8960_dai_links,
-+      .num_links = ARRAY_SIZE(mt7986_wm8960_dai_links),
-+      .controls = mt7986_wm8960_controls,
-+      .num_controls = ARRAY_SIZE(mt7986_wm8960_controls),
-+      .dapm_widgets = mt7986_wm8960_widgets,
-+      .num_dapm_widgets = ARRAY_SIZE(mt7986_wm8960_widgets),
-+};
-+
-+static int mt7986_wm8960_machine_probe(struct platform_device *pdev)
-+{
-+      struct snd_soc_card *card = &mt7986_wm8960_card;
-+      struct snd_soc_dai_link *dai_link;
-+      struct device_node *platform, *codec;
-+      struct mt7986_wm8960_priv *priv;
-+      int ret, i;
-+
-+      priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+      if (!priv)
-+              return -ENOMEM;
-+
-+      platform = of_get_child_by_name(pdev->dev.of_node, "platform");
-+
-+      if (platform) {
-+              priv->platform_node = of_parse_phandle(platform, "sound-dai", 0);
-+              of_node_put(platform);
-+
-+              if (!priv->platform_node) {
-+                      dev_err(&pdev->dev, "Failed to parse platform/sound-dai property\n");
-+                      return -EINVAL;
-+              }
-+      } else {
-+              dev_err(&pdev->dev, "Property 'platform' missing or invalid\n");
-+              return -EINVAL;
-+      }
-+
-+      for_each_card_prelinks(card, i, dai_link) {
-+              if (dai_link->platforms->name)
-+                      continue;
-+              dai_link->platforms->of_node = priv->platform_node;
-+      }
-+
-+      card->dev = &pdev->dev;
-+
-+      codec = of_get_child_by_name(pdev->dev.of_node, "codec");
-+
-+      if (codec) {
-+              priv->codec_node = of_parse_phandle(codec, "sound-dai", 0);
-+              of_node_put(codec);
-+
-+              if (!priv->codec_node) {
-+                      of_node_put(priv->platform_node);
-+                      dev_err(&pdev->dev, "Failed to parse codec/sound-dai property\n");
-+                      return -EINVAL;
-+              }
-+      } else {
-+              of_node_put(priv->platform_node);
-+              dev_err(&pdev->dev, "Property 'codec' missing or invalid\n");
-+              return -EINVAL;
-+      }
-+
-+      for_each_card_prelinks(card, i, dai_link) {
-+              if (dai_link->codecs->name)
-+                      continue;
-+              dai_link->codecs->of_node = priv->codec_node;
-+      }
-+
-+      ret = snd_soc_of_parse_audio_routing(card, "audio-routing");
-+      if (ret) {
-+              dev_err(&pdev->dev, "Failed to parse audio-routing: %d\n", ret);
-+              goto err_of_node_put;
-+      }
-+
-+      ret = devm_snd_soc_register_card(&pdev->dev, card);
-+      if (ret) {
-+              dev_err(&pdev->dev, "%s snd_soc_register_card fail: %d\n", __func__, ret);
-+              goto err_of_node_put;
-+      }
-+
-+err_of_node_put:
-+      of_node_put(priv->codec_node);
-+      of_node_put(priv->platform_node);
-+      return ret;
-+}
-+
-+static void mt7986_wm8960_machine_remove(struct platform_device *pdev)
-+{
-+      struct snd_soc_card *card = platform_get_drvdata(pdev);
-+      struct mt7986_wm8960_priv *priv = snd_soc_card_get_drvdata(card);
-+
-+      of_node_put(priv->codec_node);
-+      of_node_put(priv->platform_node);
-+}
-+
-+static const struct of_device_id mt7986_wm8960_machine_dt_match[] = {
-+      {.compatible = "mediatek,mt7986-wm8960-sound"},
-+      { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mt7986_wm8960_machine_dt_match);
-+
-+static struct platform_driver mt7986_wm8960_machine = {
-+      .driver = {
-+              .name = "mt7986-wm8960",
-+              .of_match_table = mt7986_wm8960_machine_dt_match,
-+      },
-+      .probe = mt7986_wm8960_machine_probe,
-+      .remove_new = mt7986_wm8960_machine_remove,
-+};
-+
-+module_platform_driver(mt7986_wm8960_machine);
-+
-+/* Module information */
-+MODULE_DESCRIPTION("MT7986 WM8960 ALSA SoC machine driver");
-+MODULE_AUTHOR("Vic Wu <vic.wu@mediatek.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("mt7986 wm8960 soc card");
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch b/target/linux/mediatek/patches-6.6/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch
deleted file mode 100644 (file)
index 8cf0b54..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-From 72469f950b629e57e60fbcbefed45e083619b986 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:37 +0800
-Subject: [PATCH 5/9] ASoC: dt-bindings: mediatek,mt7986-wm8960: add
- mt7986-wm8960 document
-
-Add document for mt7986 board with wm8960.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-6-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../sound/mediatek,mt7986-wm8960.yaml         | 67 +++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
-@@ -0,0 +1,67 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek MT7986 sound card with WM8960 codec
-+
-+maintainers:
-+  - Maso Huang <maso.huang@mediatek.com>
-+
-+allOf:
-+  - $ref: sound-card-common.yaml#
-+
-+properties:
-+  compatible:
-+    const: mediatek,mt7986-wm8960-sound
-+
-+  platform:
-+    type: object
-+    additionalProperties: false
-+    properties:
-+      sound-dai:
-+        description: The phandle of MT7986 platform.
-+        maxItems: 1
-+    required:
-+      - sound-dai
-+
-+  codec:
-+    type: object
-+    additionalProperties: false
-+    properties:
-+      sound-dai:
-+        description: The phandle of wm8960 codec.
-+        maxItems: 1
-+    required:
-+      - sound-dai
-+
-+unevaluatedProperties: false
-+
-+required:
-+  - compatible
-+  - audio-routing
-+  - platform
-+  - codec
-+
-+examples:
-+  - |
-+    sound {
-+        compatible = "mediatek,mt7986-wm8960-sound";
-+        model = "mt7986-wm8960";
-+        audio-routing =
-+            "Headphone", "HP_L",
-+            "Headphone", "HP_R",
-+            "LINPUT1", "AMIC",
-+            "RINPUT1", "AMIC";
-+
-+        platform {
-+            sound-dai = <&afe>;
-+        };
-+
-+        codec {
-+            sound-dai = <&wm8960>;
-+        };
-+    };
-+
-+...
diff --git a/target/linux/mediatek/patches-6.6/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch b/target/linux/mediatek/patches-6.6/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch
deleted file mode 100644 (file)
index 236d6a2..0000000
+++ /dev/null
@@ -1,180 +0,0 @@
-From d16202eb38585adbc16e32d11188dbc2127015de Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:38 +0800
-Subject: [PATCH 6/9] ASoC: dt-bindings: mediatek,mt7986-afe: add audio afe
- document
-
-Add mt7986 audio afe document.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../bindings/sound/mediatek,mt7986-afe.yaml   | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
-@@ -0,0 +1,160 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek AFE PCM controller for MT7986
-+
-+maintainers:
-+  - Maso Huang <maso.huang@mediatek.com>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - const: mediatek,mt7986-afe
-+      - items:
-+          - enum:
-+              - mediatek,mt7981-afe
-+              - mediatek,mt7988-afe
-+          - const: mediatek,mt7986-afe
-+
-+  reg:
-+    maxItems: 1
-+
-+  interrupts:
-+    maxItems: 1
-+
-+  clocks:
-+    minItems: 5
-+    items:
-+      - description: audio bus clock
-+      - description: audio 26M clock
-+      - description: audio intbus clock
-+      - description: audio hopping clock
-+      - description: audio pll clock
-+      - description: mux for pcm_mck
-+      - description: audio i2s/pcm mck
-+
-+  clock-names:
-+    minItems: 5
-+    items:
-+      - const: bus_ck
-+      - const: 26m_ck
-+      - const: l_ck
-+      - const: aud_ck
-+      - const: eg2_ck
-+      - const: sel
-+      - const: i2s_m
-+
-+required:
-+  - compatible
-+  - reg
-+  - interrupts
-+  - clocks
-+  - clock-names
-+
-+allOf:
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: mediatek,mt7986-afe
-+    then:
-+      properties:
-+        clocks:
-+          items:
-+            - description: audio bus clock
-+            - description: audio 26M clock
-+            - description: audio intbus clock
-+            - description: audio hopping clock
-+            - description: audio pll clock
-+        clock-names:
-+          items:
-+            - const: bus_ck
-+            - const: 26m_ck
-+            - const: l_ck
-+            - const: aud_ck
-+            - const: eg2_ck
-+
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: mediatek,mt7981-afe
-+    then:
-+      properties:
-+        clocks:
-+          items:
-+            - description: audio bus clock
-+            - description: audio 26M clock
-+            - description: audio intbus clock
-+            - description: audio hopping clock
-+            - description: audio pll clock
-+            - description: mux for pcm_mck
-+        clock-names:
-+          items:
-+            - const: bus_ck
-+            - const: 26m_ck
-+            - const: l_ck
-+            - const: aud_ck
-+            - const: eg2_ck
-+            - const: sel
-+
-+  - if:
-+      properties:
-+        compatible:
-+          contains:
-+            const: mediatek,mt7988-afe
-+    then:
-+      properties:
-+        clocks:
-+          items:
-+            - description: audio bus clock
-+            - description: audio 26M clock
-+            - description: audio intbus clock
-+            - description: audio hopping clock
-+            - description: audio pll clock
-+            - description: mux for pcm_mck
-+            - description: audio i2s/pcm mck
-+        clock-names:
-+          items:
-+            - const: bus_ck
-+            - const: 26m_ck
-+            - const: l_ck
-+            - const: aud_ck
-+            - const: eg2_ck
-+            - const: sel
-+            - const: i2s_m
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/interrupt-controller/arm-gic.h>
-+    #include <dt-bindings/interrupt-controller/irq.h>
-+    #include <dt-bindings/clock/mt7986-clk.h>
-+
-+    afe@11210000 {
-+        compatible = "mediatek,mt7986-afe";
-+        reg = <0x11210000 0x9000>;
-+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-+        clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>,
-+                 <&infracfg_ao CLK_INFRA_AUD_26M_CK>,
-+                 <&infracfg_ao CLK_INFRA_AUD_L_CK>,
-+                 <&infracfg_ao CLK_INFRA_AUD_AUD_CK>,
-+                 <&infracfg_ao CLK_INFRA_AUD_EG2_CK>;
-+        clock-names = "bus_ck",
-+                      "26m_ck",
-+                      "l_ck",
-+                      "aud_ck",
-+                      "eg2_ck";
-+        assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>,
-+                          <&topckgen CLK_TOP_AUD_L_SEL>,
-+                          <&topckgen CLK_TOP_A_TUNER_SEL>;
-+        assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>,
-+                                 <&apmixedsys CLK_APMIXED_APLL2>,
-+                                 <&topckgen CLK_TOP_APLL2_D4>;
-+    };
-+
-+...