.i2c = &ivtv_i2c_std,
};
+/* ------------------------------------------------------------------------- */
+
+/* AVerMedia M104 miniPCI card */
+
+static const struct ivtv_card_pci_info ivtv_pci_aver_m104[] = {
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc136 },
+ { 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_aver_m104 = {
+ .type = IVTV_CARD_AVER_M104,
+ .name = "AVerMedia M104",
+ .comment = "Not yet supported!\n",
+ .v4l2_capabilities = 0, /*IVTV_CAP_ENCODER,*/
+ .hw_video = IVTV_HW_CX25840,
+ .hw_audio = IVTV_HW_CX25840,
+ .hw_audio_ctrl = IVTV_HW_CX25840,
+ .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739,
+ .video_inputs = {
+ { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 },
+ { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 },
+ },
+ .audio_inputs = {
+ { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 },
+ },
+ .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 },
+ /* enable line-in + reset tuner */
+ .gpio_init = { .direction = 0xf000, .initial_value = 0x5000 },
+ .tuners = {
+ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+ },
+ .pci_list = ivtv_pci_aver_m104,
+ .i2c = &ivtv_i2c_std,
+};
+
static const struct ivtv_card *ivtv_card_list[] = {
&ivtv_card_pvr250,
&ivtv_card_pvr350,
&ivtv_card_asus_falcon2,
&ivtv_card_aver_pvr150,
&ivtv_card_aver_ezmaker,
+ &ivtv_card_aver_m104,
/* Variations of standard cards but with the same PCI IDs.
These cards must come last in this list. */
#define IVTV_CARD_ASUS_FALCON2 21 /* ASUS Falcon2 */
#define IVTV_CARD_AVER_PVR150PLUS 22 /* AVerMedia PVR-150 Plus */
#define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */
-#define IVTV_CARD_LAST 23
+#define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */
+#define IVTV_CARD_LAST 24
/* Variants of existing cards but with the same PCI IDs. The driver
detects these based on other device information.
"\t\t\t22 = ASUS Falcon2\n"
"\t\t\t23 = AverMedia PVR-150 Plus\n"
"\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
+ "\t\t\t25 = AverMedia M104 (not yet working)\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");