/dts-v1/;
#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW51XX";
compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-
- /* these are used by bootloader for disabling nodes */
- aliases {
- can0 = &can1;
- ethernet0 = &fec;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- led0 = &led0;
- led1 = &led1;
- nand = &gpmi;
- usb0 = &usbh1;
- usb1 = &usbotg;
- };
-
- memory {
- reg = <0x10000000 0x20000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0: user1 {
- label = "user1";
- gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led1: user2 {
- label = "user2";
- gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
- default-state = "off";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_5p0v: 5p0v {
- compatible = "regulator-fixed";
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 30 0>;
- status = "okay";
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_2>;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- eeprom1: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-
- eeprom2: eeprom@51 {
- compatible = "atmel,24c02";
- reg = <0x51>;
- pagesize = <16>;
- };
-
- eeprom3: eeprom@52 {
- compatible = "atmel,24c02";
- reg = <0x52>;
- pagesize = <16>;
- };
-
- eeprom4: eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- };
-
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hwmon: gsc@29 {
- compatible = "gw,gsp";
- reg = <0x29>;
- };
-
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
- status = "okay";
-
- pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
- reg = <0x3c>;
-
- regulators {
- sw1_reg: ltc3676__sw1 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: ltc3676__sw2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: ltc3676__sw3 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: ltc3676__sw4 {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ltc3676__ldo2 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: ltc3676__ldo4 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "okay";
-
- videoin: adv7180@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- };
};
&iomuxc {
};
};
};
-
-&pcie {
- reset-gpio = <&gpio1 0 0>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5_1>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- status = "okay";
-};
/dts-v1/;
#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW52XX";
compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-
- /* these are used by bootloader for disabling nodes */
- aliases {
- can0 = &can1;
- ethernet0 = &fec;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- led0 = &led0;
- led1 = &led1;
- led2 = &led2;
- nand = &gpmi;
- ssi0 = &ssi1;
- usb0 = &usbh1;
- usb1 = &usbotg;
- usdhc2 = &usdhc3;
- };
-
- memory {
- reg = <0x10000000 0x20000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0: user1 {
- label = "user1";
- gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led1: user2 {
- label = "user2";
- gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
- default-state = "off";
- };
-
- led2: user3 {
- label = "user3";
- gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
- default-state = "off";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_1p0v: 1p0v {
- compatible = "regulator-fixed";
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- /* remove this fixed regulator once ltc3676__sw2 driver available */
- reg_1p8v: 1p8v {
- compatible = "regulator-fixed";
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_5p0v: 5p0v {
- compatible = "regulator-fixed";
- regulator-name = "5P0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 30 0>;
- status = "okay";
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_2>;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- eeprom1: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-
- eeprom2: eeprom@51 {
- compatible = "atmel,24c02";
- reg = <0x51>;
- pagesize = <16>;
- };
-
- eeprom3: eeprom@52 {
- compatible = "atmel,24c02";
- reg = <0x52>;
- pagesize = <16>;
- };
-
- eeprom4: eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- };
-
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hwmon: gsc@29 {
- compatible = "gw,gsp";
- reg = <0x29>;
- };
-
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
- status = "okay";
-
- pciswitch: pex8609@3f {
- compatible = "plx,pex8609";
- reg = <0x3f>;
- };
-
- pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
- reg = <0x3c>;
-
- regulators {
- sw1_reg: ltc3676__sw1 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: ltc3676__sw2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: ltc3676__sw3 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: ltc3676__sw4 {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ltc3676__ldo2 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: ltc3676__ldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: ltc3676__ldo4 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "okay";
-
- accelerometer: fxos8700@1e {
- compatible = "fsl,fxos8700";
- reg = <0x13>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 169>;
- VDDA-supply = <®_1p8v>;
- VDDIO-supply = <®_3p3v>;
- };
-
- touchscreen: egalax_ts@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- interrupt-parent = <&gpio7>;
- interrupts = <12 2>; /* gpio7_12 active low */
- wakeup-gpios = <&gpio7 12 0>;
- };
-
- videoin: adv7180@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- };
};
&iomuxc {
};
};
};
-
-&ldb {
- status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-};
-
-&pcie {
- reset-gpio = <&gpio1 29 0>;
- status = "okay";
-};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5_1>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- cd-gpios = <&gpio7 0 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
/dts-v1/;
#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 DualLite GW53XX";
compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-
- /* these are used by bootloader for disabling nodes */
- aliases {
- can0 = &can1;
- ethernet0 = &fec;
- ethernet1 = ð1;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- led0 = &led0;
- led1 = &led1;
- led2 = &led2;
- nand = &gpmi;
- sky2 = ð1;
- ssi0 = &ssi1;
- usb0 = &usbh1;
- usb1 = &usbotg;
- usdhc2 = &usdhc3;
- };
-
- chosen {
- bootargs = "console=ttymxc1,115200";
- };
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0: user1 {
- label = "user1";
- gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led1: user2 {
- label = "user2";
- gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
- default-state = "off";
- };
-
- led2: user3 {
- label = "user3";
- gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
- default-state = "off";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_1p0v: 1p0v {
- compatible = "regulator-fixed";
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- /* remove this fixed regulator once ltc3676__sw2 driver available */
- reg_1p8v: 1p8v {
- compatible = "regulator-fixed";
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_h1_vbus: usb_h1_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 30 0>;
- status = "okay";
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_2>;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- eeprom1: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-
- eeprom2: eeprom@51 {
- compatible = "atmel,24c02";
- reg = <0x51>;
- pagesize = <16>;
- };
-
- eeprom3: eeprom@52 {
- compatible = "atmel,24c02";
- reg = <0x52>;
- pagesize = <16>;
- };
-
- eeprom4: eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- };
-
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hwmon: gsc@29 {
- compatible = "gw,gsp";
- reg = <0x29>;
- };
-
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
- status = "okay";
-
- pciswitch: pex8609@3f {
- compatible = "plx,pex8609";
- reg = <0x3f>;
- };
-
- pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
- reg = <0x3c>;
-
- regulators {
- sw1_reg: ltc3676__sw1 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: ltc3676__sw2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: ltc3676__sw3 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: ltc3676__sw4 {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ltc3676__ldo2 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: ltc3676__ldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: ltc3676__ldo4 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "okay";
-
- accelerometer: fxos8700@1e {
- compatible = "fsl,fxos8700";
- reg = <0x1e>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 169>;
- VDDA-supply = <®_1p8v>;
- VDDIO-supply = <®_3p3v>;
- };
-
- hdmiin: adv7611@4c {
- compatible = "adi,adv7611";
- reg = <0x4c>;
- };
-
- touchscreen: egalax_ts@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- interrupt-parent = <&gpio7>;
- interrupts = <12 2>; /* gpio7_12 active low */
- wakeup-gpios = <&gpio7 12 0>;
- };
-
- videoout: adv7393@2a {
- compatible = "adi,adv7393";
- reg = <0x2a>;
- };
-
- videoin: adv7180@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- };
};
&iomuxc {
};
};
};
-
-&ldb {
- status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-};
-
-&pcie {
- reset-gpio = <&gpio1 29 0>;
- status = "okay";
-
- eth1: sky2@8 { /* MAC/PHY on bus 8 */
- compatible = "marvell,sky2";
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
-};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5_1>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_h1_vbus>;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- cd-gpios = <&gpio7 0 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
+ MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
+ MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
+ MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
+ MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6Q_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
+ MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
+ MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
+ MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+ MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+ MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
+ MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
+ MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
+ MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
+ >;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
+ MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
+ MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+ MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+ MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
+ MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
+ MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
+ >;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
bootargs = "console=ttymxc1,115200";
};
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
leds {
compatible = "gpio-leds";
};
};
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
regulators {
compatible = "simple-bus";
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart2_3>;
status = "okay";
};
/dts-v1/;
#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW54XX";
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-
- /* these are used by bootloader for disabling nodes */
- aliases {
- can0 = &can1;
- ethernet0 = &fec;
- ethernet1 = ð1;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- led0 = &led0;
- led1 = &led1;
- led2 = &led2;
- nand = &gpmi;
- sky2 = ð1;
- ssi0 = &ssi1;
- usb0 = &usbh1;
- usb1 = &usbotg;
- usdhc2 = &usdhc3;
- };
-
- chosen {
- bootargs = "console=ttymxc1,115200";
- };
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0: user1 {
- label = "user1";
- gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led1: user2 {
- label = "user2";
- gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
- default-state = "off";
- };
-
- led2: user3 {
- label = "user3";
- gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
- default-state = "off";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_1p0v: 1p0v {
- compatible = "regulator-fixed";
- regulator-name = "1P0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_h1_vbus: usb_h1_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 30 0>;
- status = "okay";
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_2>;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- eeprom1: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-
- eeprom2: eeprom@51 {
- compatible = "atmel,24c02";
- reg = <0x51>;
- pagesize = <16>;
- };
-
- eeprom3: eeprom@52 {
- compatible = "atmel,24c02";
- reg = <0x52>;
- pagesize = <16>;
- };
-
- eeprom4: eeprom@53 {
- compatible = "atmel,24c02";
- reg = <0x53>;
- pagesize = <16>;
- };
-
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- hwmon: gsc@29 {
- compatible = "gw,gsp";
- reg = <0x29>;
- };
-
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
- status = "okay";
-
- pmic: pfuze100@08 {
- compatible = "fsl,pfuze100";
- reg = <0x08>;
-
- regulators {
- sw1a_reg: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3b_reg: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- };
-
- snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vref_reg: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
-
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- };
-
- vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vgen4_reg: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen5_reg: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen6_reg: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-
- pciswitch: pex8609@3f {
- compatible = "plx,pex8609";
- reg = <0x3f>;
- };
-
- pciclkgen: si52147@6b {
- compatible = "sil,si52147";
- reg = <0x6b>;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "okay";
-
- accelerometer: fxos8700@1e {
- compatible = "fsl,fxos8700";
- reg = <0x1e>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 169>;
- VDDA-supply = <&sw4_reg>;
- VDDIO-supply = <®_3p3v>;
- };
-
- hdmiin: adv7611@4c {
- compatible = "adi,adv7611";
- reg = <0x4c>;
- };
-
- touchscreen: egalax_ts@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- interrupt-parent = <&gpio7>;
- interrupts = <12 2>; /* gpio7_12 active low */
- wakeup-gpios = <&gpio7 12 0>;
- };
-
- videoout: adv7393@2a {
- compatible = "adi,adv7393";
- reg = <0x2a>;
- };
-
- videoin: adv7180@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- };
};
&iomuxc {
};
};
-&ldb {
+&ldb {
status = "okay";
lvds-channel@0 {
crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
};
};
-&pcie {
- reset-gpio = <&gpio1 29 0>;
- status = "okay";
-
- eth1: sky2@8 { /* MAC/PHY on bus 8 */
- compatible = "marvell,sky2";
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- };
-};
-
&sata {
status = "okay";
};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5_1>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_h1_vbus>;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- cd-gpios = <&gpio7 0 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ led0 = &led0;
+ led1 = &led1;
+ nand = &gpmi;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: 5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 0 0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_3>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_1p0v: 1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ /* remove this fixed regulator once ltc3676__sw2 driver available */
+ reg_1p8v: 1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: 5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ltc3676__ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x13>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 169>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ ethernet1 = ð1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ sky2 = ð1;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_1p0v: 1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ /* remove this fixed regulator once ltc3676__sw2 driver available */
+ reg_1p8v: 1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ltc3676__ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x1e>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 169>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoout: adv7393@2a {
+ compatible = "adi,adv7393";
+ reg = <0x2a>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ ethernet1 = ð1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ sky2 = ð1;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_1p0v: 1p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pciclkgen: si52147@6b {
+ compatible = "sil,si52147";
+ reg = <0x6b>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x1e>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 169>;
+ VDDA-supply = <&sw4_reg>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoout: adv7393@2a {
+ compatible = "adi,adv7393";
+ reg = <0x2a>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--- /dev/null
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ imx6dl-sabresd.dtb \
+ imx6dl-wandboard.dtb \
+ imx6q-arm2.dtb \
++ imx6q-gw51xx.dtb \
++ imx6q-gw52xx.dtb \
++ imx6q-gw53xx.dtb \
++ imx6q-gw54xx.dtb \
++ imx6q-gw5400-a.dtb \
++ imx6dl-gw51xx.dtb \
++ imx6dl-gw52xx.dtb \
++ imx6dl-gw53xx.dtb \
++ imx6dl-gw54xx.dtb \
+ imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
+--- a/arch/arm/boot/dts/imx6q.dtsi
++++ b/arch/arm/boot/dts/imx6q.dtsi
+@@ -212,6 +212,30 @@
+ MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
++
++ /* No strobe */
++ pinctrl_gpmi_nand_2: gpmi-nand-2 {
++ fsl,pins = <
++ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
++ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
++ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
++ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
++ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
++ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
++ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
++ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
++ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
++ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
++ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
++ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
++ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
++ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
++ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
++ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
++ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
++ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
++ >;
++ };
+ };
+
+ i2c1 {
+@@ -230,6 +254,12 @@
+ MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
++ pinctrl_i2c2_2: i2c2grp-2 {
++ fsl,pins = <
++ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++ >;
++ };
+ };
+
+ i2c3 {
+@@ -239,6 +269,12 @@
+ MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
++ pinctrl_i2c3_2: i2c3grp-2 {
++ fsl,pins = <
++ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++ >;
++ };
+ };
+
+ uart1 {
+@@ -248,6 +284,12 @@
+ MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
++ pinctrl_uart1_2: uart1grp-2 {
++ fsl,pins = <
++ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++ >;
++ };
+ };
+
+ uart2 {
+@@ -257,6 +299,21 @@
+ MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
++ pinctrl_uart2_3: uart2grp-3 {
++ fsl,pins = <
++ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++ >;
++ };
++ };
++
++ uart3 {
++ pinctrl_uart3_3: uart3grp-3 {
++ fsl,pins = <
++ MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++ MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++ >;
++ };
+ };
+
+ uart4 {
+@@ -267,6 +324,15 @@
+ >;
+ };
+ };
++
++ uart5 {
++ pinctrl_uart5_1: uart5grp-1 {
++ fsl,pins = <
++ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++ >;
++ };
++ };
+
+ usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+--- a/arch/arm/boot/dts/imx6dl.dtsi
++++ b/arch/arm/boot/dts/imx6dl.dtsi
+@@ -37,6 +37,18 @@
+ compatible = "fsl,imx6dl-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
++ /* shared pinctrl settings */
++ audmux {
++ pinctrl_audmux_1: audmux-1 {
++ fsl,pins = <
++ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
++ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
++ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
++ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
++ >;
++ };
++ };
++
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+@@ -105,6 +117,59 @@
+ };
+ };
+
++ gpmi-nand {
++ /* No strobe */
++ pinctrl_gpmi_nand_2: gpmi-nand-2 {
++ fsl,pins = <
++ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
++ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
++ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
++ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
++ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
++ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
++ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
++ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
++ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
++ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
++ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
++ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
++ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
++ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
++ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
++ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
++ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
++ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
++ >;
++ };
++ };
++
++ i2c1 {
++ pinctrl_i2c1_1: i2c1grp-1 {
++ fsl,pins = <
++ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
++ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
++ >;
++ };
++ };
++
++ i2c2 {
++ pinctrl_i2c2_2: i2c2grp-2 {
++ fsl,pins = <
++ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++ >;
++ };
++ };
++
++ i2c3 {
++ pinctrl_i2c3_2: i2c3grp-2 {
++ fsl,pins = <
++ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++ >;
++ };
++ };
++
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+@@ -112,6 +177,30 @@
+ MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
++ pinctrl_uart1_2: uart1grp-2 {
++ fsl,pins = <
++ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++ >;
++ };
++ };
++
++ uart2 {
++ pinctrl_uart2_3: uart2grp-3 {
++ fsl,pins = <
++ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++ >;
++ };
++ };
++
++ uart3 {
++ pinctrl_uart3_3: uart3grp-3 {
++ fsl,pins = <
++ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++ >;
++ };
+ };
+
+ uart4 {
+@@ -123,7 +212,22 @@
+ };
+ };
+
++ uart5 {
++ pinctrl_uart5_1: uart5grp-1 {
++ fsl,pins = <
++ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++ >;
++ };
++ };
++
+ usbotg {
++ pinctrl_usbotg_1: usbotggrp-1 {
++ fsl,pins = <
++ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
++ >;
++ };
++
+ pinctrl_usbotg_2: usbotggrp-2 {
+ fsl,pins = <
+ MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-gw5400-a.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
---- a/arch/arm/boot/dts/imx6q.dtsi
-+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -98,6 +98,14 @@
- MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
- >;
- };
-+
-+ pinctrl_audmux_3: audmux-3 {
-+ fsl,pins = <
-+ MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
-+ MX6Q_PAD_EIM_D25__AUD5_RXC 0x80000000
-+ MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
-+ >;
-+ };
- };
-
- ecspi1 {
-@@ -212,6 +220,30 @@
- MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-+
-+ /* No strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
-+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
- };
-
- i2c1 {
-@@ -230,6 +262,12 @@
- MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
-+ pinctrl_i2c2_2: i2c2grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
- };
-
- i2c3 {
-@@ -239,6 +277,12 @@
- MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
-+ pinctrl_i2c3_2: i2c3grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
- };
-
- uart1 {
-@@ -248,6 +292,12 @@
- MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart2 {
-@@ -257,6 +307,21 @@
- MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart2_2: uart2grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart3 {
-+ pinctrl_uart3_1: uart3grp-1 {
-+ fsl,pins = <
-+ MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
-+ MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -267,6 +332,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
- imx6q-gw5400-a.dtb \
-+ imx6q-gw54xx.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
+++ /dev/null
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -105,6 +105,95 @@
- };
- };
-
-+ gpmi-nand {
-+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
-+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1
-+ >;
-+ };
-+
-+ /* No strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
-+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+ };
-+
-+ i2c1 {
-+ pinctrl_i2c1_1: i2c1grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
-+ i2c2 {
-+ pinctrl_i2c2_1: i2c2grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-+ MX6DL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+ pinctrl_i2c2_2: i2c2grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
-+ i2c3 {
-+ pinctrl_i2c3_1: i2c3grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-+ MX6DL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+ pinctrl_i2c3_2: i2c3grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
-@@ -112,6 +201,36 @@
- MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart2 {
-+ pinctrl_uart2_1: uart2grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ pinctrl_uart2_2: uart2grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
-+ MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart3 {
-+ pinctrl_uart3_1: uart3grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -122,6 +241,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_2: usbotggrp-2 {
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6q-arm2.dtb \
- imx6q-gw5400-a.dtb \
- imx6q-gw54xx.dtb \
-+ imx6dl-gw51xx.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6q-gw5400-a.dtb \
- imx6q-gw54xx.dtb \
- imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -37,6 +37,18 @@
- compatible = "fsl,imx6dl-iomuxc";
- reg = <0x020e0000 0x4000>;
-
-+ /* shared pinctrl settings */
-+ audmux {
-+ pinctrl_audmux_1: audmux-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
-+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
-+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
-+ >;
-+ };
-+ };
-+
- enet {
- pinctrl_enet_1: enetgrp-1 {
- fsl,pins = <
-@@ -222,6 +234,12 @@
- MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart3 {
-@@ -252,6 +270,12 @@
- };
-
- usbotg {
-+ pinctrl_usbotg_1: usbotggrp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
- pinctrl_usbotg_2: usbotggrp-2 {
- fsl,pins = <
- MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+++ /dev/null
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -121,6 +121,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6q-gw54xx.dtb \
- imx6dl-gw51xx.dtb \
- imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
imx6dl-gw51xx \
imx6dl-gw52xx \
imx6dl-gw53xx \
- imx6q-gw5400-a \
- imx6q-gw54xx
+ imx6dl-gw54xx \
+ imx6q-gw51xx \
+ imx6q-gw52xx \
+ imx6q-gw53xx \
+ imx6q-gw54xx \
+ imx6q-gw5400-a
$(eval $(call Profile,VENTANA))
projects / openwrt / staging / ansuel.git / commitdiff