+++ /dev/null
-/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * Neither the name of ARM nor the names of its contributors may be used
- * to endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <arch_helpers.h>
-#include <assert.h>
-#include <debug.h>
-#include <mmio.h>
-#include <memctrl.h>
-#include <string.h>
-#include <tegra_def.h>
-#include <utils.h>
-#include <xlat_tables.h>
-
-#define TEGRA_GPU_RESET_REG_OFFSET 0x28c
-#define GPU_RESET_BIT (1 << 24)
-
-/* Video Memory base and size (live values) */
-static uintptr_t video_mem_base;
-static uint64_t video_mem_size;
-
-/*
- * Init SMMU.
- */
-void tegra_memctrl_setup(void)
-{
- /*
- * Setup the Memory controller to allow only secure accesses to
- * the TZDRAM carveout
- */
- INFO("Configuring SMMU\n");
-
- /* allow translations for all MC engines */
- tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_0_0,
- (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
- tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_1_0,
- (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
- tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_2_0,
- (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
- tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_3_0,
- (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
- tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_4_0,
- (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
-
- tegra_mc_write_32(MC_SMMU_ASID_SECURITY_0, MC_SMMU_ASID_SECURITY);
-
- tegra_mc_write_32(MC_SMMU_TLB_CONFIG_0, MC_SMMU_TLB_CONFIG_0_RESET_VAL);
- tegra_mc_write_32(MC_SMMU_PTC_CONFIG_0, MC_SMMU_PTC_CONFIG_0_RESET_VAL);
-
- /* flush PTC and TLB */
- tegra_mc_write_32(MC_SMMU_PTC_FLUSH_0, MC_SMMU_PTC_FLUSH_ALL);
- (void)tegra_mc_read_32(MC_SMMU_CONFIG_0); /* read to flush writes */
- tegra_mc_write_32(MC_SMMU_TLB_FLUSH_0, MC_SMMU_TLB_FLUSH_ALL);
-
- /* enable SMMU */
- tegra_mc_write_32(MC_SMMU_CONFIG_0,
- MC_SMMU_CONFIG_0_SMMU_ENABLE_ENABLE);
- (void)tegra_mc_read_32(MC_SMMU_CONFIG_0); /* read to flush writes */
-
- /* video memory carveout */
- tegra_mc_write_32(MC_VIDEO_PROTECT_BASE, video_mem_base);
- tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, video_mem_size);
-}
-
-/*
- * Secure the BL31 DRAM aperture.
- *
- * phys_base = physical base of TZDRAM aperture
- * size_in_bytes = size of aperture in bytes
- */
-void tegra_memctrl_tzdram_setup(uint64_t phys_base, uint32_t size_in_bytes)
-{
- /*
- * Setup the Memory controller to allow only secure accesses to
- * the TZDRAM carveout
- */
- INFO("Configuring TrustZone DRAM Memory Carveout\n");
-
- tegra_mc_write_32(MC_SECURITY_CFG0_0, phys_base);
- tegra_mc_write_32(MC_SECURITY_CFG1_0, size_in_bytes >> 20);
-}
-
-static void tegra_clear_videomem(uintptr_t non_overlap_area_start,
- unsigned long long non_overlap_area_size)
-{
- /*
- * Perform cache maintenance to ensure that the non-overlapping area is
- * zeroed out. The first invalidation of this range ensures that
- * possible evictions of dirty cache lines do not interfere with the
- * 'zeromem' operation. Other CPUs could speculatively prefetch the
- * main memory contents of this area between the first invalidation and
- * the 'zeromem' operation. The second invalidation ensures that any
- * such cache lines are removed as well.
- */
- inv_dcache_range(non_overlap_area_start, non_overlap_area_size);
- zeromem((void *)non_overlap_area_start, non_overlap_area_size);
- inv_dcache_range(non_overlap_area_start, non_overlap_area_size);
-}
-
-/*
- * Program the Video Memory carveout region
- *
- * phys_base = physical base of aperture
- * size_in_bytes = size of aperture in bytes
- */
-void tegra_memctrl_videomem_setup(uint64_t phys_base, uint32_t size_in_bytes)
-{
- uintptr_t vmem_end_old = video_mem_base + (video_mem_size << 20);
- uintptr_t vmem_end_new = phys_base + size_in_bytes;
- uint32_t regval;
- unsigned long long non_overlap_area_size;
-
- /*
- * The GPU is the user of the Video Memory region. In order to
- * transition to the new memory region smoothly, we program the
- * new base/size ONLY if the GPU is in reset mode.
- */
- regval = mmio_read_32(TEGRA_CAR_RESET_BASE + TEGRA_GPU_RESET_REG_OFFSET);
- if ((regval & GPU_RESET_BIT) == 0) {
- ERROR("GPU not in reset! Video Memory setup failed\n");
- return;
- }
-
- /*
- * Setup the Memory controller to restrict CPU accesses to the Video
- * Memory region
- */
- INFO("Configuring Video Memory Carveout\n");
-
- /*
- * Configure Memory Controller directly for the first time.
- */
- if (video_mem_base == 0)
- goto done;
-
- /*
- * Clear the old regions now being exposed. The following cases
- * can occur -
- *
- * 1. clear whole old region (no overlap with new region)
- * 2. clear old sub-region below new base
- * 3. clear old sub-region above new end
- */
- INFO("Cleaning previous Video Memory Carveout\n");
-
- disable_mmu_el3();
- if (phys_base > vmem_end_old || video_mem_base > vmem_end_new) {
- tegra_clear_videomem(video_mem_base, video_mem_size << 20);
- } else {
- if (video_mem_base < phys_base) {
- non_overlap_area_size = phys_base - video_mem_base;
- tegra_clear_videomem(video_mem_base, non_overlap_area_size);
- }
- if (vmem_end_old > vmem_end_new) {
- non_overlap_area_size = vmem_end_old - vmem_end_new;
- tegra_clear_videomem(vmem_end_new, non_overlap_area_size);
- }
- }
- enable_mmu_el3(0);
-
-done:
- tegra_mc_write_32(MC_VIDEO_PROTECT_BASE, phys_base);
- tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, size_in_bytes >> 20);
-
- /* store new values */
- video_mem_base = phys_base;
- video_mem_size = size_in_bytes >> 20;
-}
--- /dev/null
+/*
+ * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <memctrl.h>
+#include <memctrl_v1.h>
+#include <mmio.h>
+#include <string.h>
+#include <tegra_def.h>
+#include <utils.h>
+#include <xlat_tables.h>
+
+#define TEGRA_GPU_RESET_REG_OFFSET 0x28c
+#define GPU_RESET_BIT (1 << 24)
+
+/* Video Memory base and size (live values) */
+static uintptr_t video_mem_base;
+static uint64_t video_mem_size;
+
+/*
+ * Init SMMU.
+ */
+void tegra_memctrl_setup(void)
+{
+ /*
+ * Setup the Memory controller to allow only secure accesses to
+ * the TZDRAM carveout
+ */
+ INFO("Tegra Memory Controller (v1)\n");
+
+ /* allow translations for all MC engines */
+ tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_0_0,
+ (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
+ tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_1_0,
+ (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
+ tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_2_0,
+ (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
+ tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_3_0,
+ (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
+ tegra_mc_write_32(MC_SMMU_TRANSLATION_ENABLE_4_0,
+ (unsigned int)MC_SMMU_TRANSLATION_ENABLE);
+
+ tegra_mc_write_32(MC_SMMU_ASID_SECURITY_0, MC_SMMU_ASID_SECURITY);
+
+ tegra_mc_write_32(MC_SMMU_TLB_CONFIG_0, MC_SMMU_TLB_CONFIG_0_RESET_VAL);
+ tegra_mc_write_32(MC_SMMU_PTC_CONFIG_0, MC_SMMU_PTC_CONFIG_0_RESET_VAL);
+
+ /* flush PTC and TLB */
+ tegra_mc_write_32(MC_SMMU_PTC_FLUSH_0, MC_SMMU_PTC_FLUSH_ALL);
+ (void)tegra_mc_read_32(MC_SMMU_CONFIG_0); /* read to flush writes */
+ tegra_mc_write_32(MC_SMMU_TLB_FLUSH_0, MC_SMMU_TLB_FLUSH_ALL);
+
+ /* enable SMMU */
+ tegra_mc_write_32(MC_SMMU_CONFIG_0,
+ MC_SMMU_CONFIG_0_SMMU_ENABLE_ENABLE);
+ (void)tegra_mc_read_32(MC_SMMU_CONFIG_0); /* read to flush writes */
+
+ /* video memory carveout */
+ tegra_mc_write_32(MC_VIDEO_PROTECT_BASE, video_mem_base);
+ tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, video_mem_size);
+}
+
+/*
+ * Secure the BL31 DRAM aperture.
+ *
+ * phys_base = physical base of TZDRAM aperture
+ * size_in_bytes = size of aperture in bytes
+ */
+void tegra_memctrl_tzdram_setup(uint64_t phys_base, uint32_t size_in_bytes)
+{
+ /*
+ * Setup the Memory controller to allow only secure accesses to
+ * the TZDRAM carveout
+ */
+ INFO("Configuring TrustZone DRAM Memory Carveout\n");
+
+ tegra_mc_write_32(MC_SECURITY_CFG0_0, phys_base);
+ tegra_mc_write_32(MC_SECURITY_CFG1_0, size_in_bytes >> 20);
+}
+
+static void tegra_clear_videomem(uintptr_t non_overlap_area_start,
+ unsigned long long non_overlap_area_size)
+{
+ /*
+ * Perform cache maintenance to ensure that the non-overlapping area is
+ * zeroed out. The first invalidation of this range ensures that
+ * possible evictions of dirty cache lines do not interfere with the
+ * 'zeromem' operation. Other CPUs could speculatively prefetch the
+ * main memory contents of this area between the first invalidation and
+ * the 'zeromem' operation. The second invalidation ensures that any
+ * such cache lines are removed as well.
+ */
+ inv_dcache_range(non_overlap_area_start, non_overlap_area_size);
+ zeromem((void *)non_overlap_area_start, non_overlap_area_size);
+ inv_dcache_range(non_overlap_area_start, non_overlap_area_size);
+}
+
+/*
+ * Program the Video Memory carveout region
+ *
+ * phys_base = physical base of aperture
+ * size_in_bytes = size of aperture in bytes
+ */
+void tegra_memctrl_videomem_setup(uint64_t phys_base, uint32_t size_in_bytes)
+{
+ uintptr_t vmem_end_old = video_mem_base + (video_mem_size << 20);
+ uintptr_t vmem_end_new = phys_base + size_in_bytes;
+ uint32_t regval;
+ unsigned long long non_overlap_area_size;
+
+ /*
+ * The GPU is the user of the Video Memory region. In order to
+ * transition to the new memory region smoothly, we program the
+ * new base/size ONLY if the GPU is in reset mode.
+ */
+ regval = mmio_read_32(TEGRA_CAR_RESET_BASE + TEGRA_GPU_RESET_REG_OFFSET);
+ if ((regval & GPU_RESET_BIT) == 0) {
+ ERROR("GPU not in reset! Video Memory setup failed\n");
+ return;
+ }
+
+ /*
+ * Setup the Memory controller to restrict CPU accesses to the Video
+ * Memory region
+ */
+ INFO("Configuring Video Memory Carveout\n");
+
+ /*
+ * Configure Memory Controller directly for the first time.
+ */
+ if (video_mem_base == 0)
+ goto done;
+
+ /*
+ * Clear the old regions now being exposed. The following cases
+ * can occur -
+ *
+ * 1. clear whole old region (no overlap with new region)
+ * 2. clear old sub-region below new base
+ * 3. clear old sub-region above new end
+ */
+ INFO("Cleaning previous Video Memory Carveout\n");
+
+ disable_mmu_el3();
+ if (phys_base > vmem_end_old || video_mem_base > vmem_end_new) {
+ tegra_clear_videomem(video_mem_base, video_mem_size << 20);
+ } else {
+ if (video_mem_base < phys_base) {
+ non_overlap_area_size = phys_base - video_mem_base;
+ tegra_clear_videomem(video_mem_base, non_overlap_area_size);
+ }
+ if (vmem_end_old > vmem_end_new) {
+ non_overlap_area_size = vmem_end_old - vmem_end_new;
+ tegra_clear_videomem(vmem_end_new, non_overlap_area_size);
+ }
+ }
+ enable_mmu_el3(0);
+
+done:
+ tegra_mc_write_32(MC_VIDEO_PROTECT_BASE, phys_base);
+ tegra_mc_write_32(MC_VIDEO_PROTECT_SIZE_MB, size_in_bytes >> 20);
+
+ /* store new values */
+ video_mem_base = phys_base;
+ video_mem_size = size_in_bytes >> 20;
+}
plat/common/aarch64/platform_mp_stack.S \
plat/common/plat_psci_common.c \
${COMMON_DIR}/aarch64/tegra_helpers.S \
- ${COMMON_DIR}/drivers/memctrl/memctrl.c \
${COMMON_DIR}/drivers/pmc/pmc.c \
${COMMON_DIR}/tegra_bl31_setup.c \
${COMMON_DIR}/tegra_delay_timer.c \
#ifndef __MEMCTRL_H__
#define __MEMCTRL_H__
-#include <mmio.h>
-#include <tegra_def.h>
-
-/* SMMU registers */
-#define MC_SMMU_CONFIG_0 0x10
-#define MC_SMMU_CONFIG_0_SMMU_ENABLE_DISABLE 0
-#define MC_SMMU_CONFIG_0_SMMU_ENABLE_ENABLE 1
-#define MC_SMMU_TLB_CONFIG_0 0x14
-#define MC_SMMU_TLB_CONFIG_0_RESET_VAL 0x20000010
-#define MC_SMMU_PTC_CONFIG_0 0x18
-#define MC_SMMU_PTC_CONFIG_0_RESET_VAL 0x2000003f
-#define MC_SMMU_TLB_FLUSH_0 0x30
-#define TLB_FLUSH_VA_MATCH_ALL 0
-#define TLB_FLUSH_ASID_MATCH_DISABLE 0
-#define TLB_FLUSH_ASID_MATCH_SHIFT 31
-#define MC_SMMU_TLB_FLUSH_ALL \
- (TLB_FLUSH_VA_MATCH_ALL | \
- (TLB_FLUSH_ASID_MATCH_DISABLE << TLB_FLUSH_ASID_MATCH_SHIFT))
-#define MC_SMMU_PTC_FLUSH_0 0x34
-#define MC_SMMU_PTC_FLUSH_ALL 0
-#define MC_SMMU_ASID_SECURITY_0 0x38
-#define MC_SMMU_ASID_SECURITY 0
-#define MC_SMMU_TRANSLATION_ENABLE_0_0 0x228
-#define MC_SMMU_TRANSLATION_ENABLE_1_0 0x22c
-#define MC_SMMU_TRANSLATION_ENABLE_2_0 0x230
-#define MC_SMMU_TRANSLATION_ENABLE_3_0 0x234
-#define MC_SMMU_TRANSLATION_ENABLE_4_0 0xb98
-#define MC_SMMU_TRANSLATION_ENABLE (~0)
-
-/* TZDRAM carveout configuration registers */
-#define MC_SECURITY_CFG0_0 0x70
-#define MC_SECURITY_CFG1_0 0x74
-
-/* Video Memory carveout configuration registers */
-#define MC_VIDEO_PROTECT_BASE 0x648
-#define MC_VIDEO_PROTECT_SIZE_MB 0x64c
-
-static inline uint32_t tegra_mc_read_32(uint32_t off)
-{
- return mmio_read_32(TEGRA_MC_BASE + off);
-}
-
-static inline void tegra_mc_write_32(uint32_t off, uint32_t val)
-{
- mmio_write_32(TEGRA_MC_BASE + off, val);
-}
-
void tegra_memctrl_setup(void);
void tegra_memctrl_tzdram_setup(uint64_t phys_base, uint32_t size_in_bytes);
void tegra_memctrl_videomem_setup(uint64_t phys_base, uint32_t size_in_bytes);
--- /dev/null
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __MEMCTRLV1_H__
+#define __MEMCTRLV1_H__
+
+#include <mmio.h>
+#include <tegra_def.h>
+
+/* SMMU registers */
+#define MC_SMMU_CONFIG_0 0x10
+#define MC_SMMU_CONFIG_0_SMMU_ENABLE_DISABLE 0
+#define MC_SMMU_CONFIG_0_SMMU_ENABLE_ENABLE 1
+#define MC_SMMU_TLB_CONFIG_0 0x14
+#define MC_SMMU_TLB_CONFIG_0_RESET_VAL 0x20000010
+#define MC_SMMU_PTC_CONFIG_0 0x18
+#define MC_SMMU_PTC_CONFIG_0_RESET_VAL 0x2000003f
+#define MC_SMMU_TLB_FLUSH_0 0x30
+#define TLB_FLUSH_VA_MATCH_ALL 0
+#define TLB_FLUSH_ASID_MATCH_DISABLE 0
+#define TLB_FLUSH_ASID_MATCH_SHIFT 31
+#define MC_SMMU_TLB_FLUSH_ALL \
+ (TLB_FLUSH_VA_MATCH_ALL | \
+ (TLB_FLUSH_ASID_MATCH_DISABLE << TLB_FLUSH_ASID_MATCH_SHIFT))
+#define MC_SMMU_PTC_FLUSH_0 0x34
+#define MC_SMMU_PTC_FLUSH_ALL 0
+#define MC_SMMU_ASID_SECURITY_0 0x38
+#define MC_SMMU_ASID_SECURITY 0
+#define MC_SMMU_TRANSLATION_ENABLE_0_0 0x228
+#define MC_SMMU_TRANSLATION_ENABLE_1_0 0x22c
+#define MC_SMMU_TRANSLATION_ENABLE_2_0 0x230
+#define MC_SMMU_TRANSLATION_ENABLE_3_0 0x234
+#define MC_SMMU_TRANSLATION_ENABLE_4_0 0xb98
+#define MC_SMMU_TRANSLATION_ENABLE (~0)
+
+/* TZDRAM carveout configuration registers */
+#define MC_SECURITY_CFG0_0 0x70
+#define MC_SECURITY_CFG1_0 0x74
+
+/* Video Memory carveout configuration registers */
+#define MC_VIDEO_PROTECT_BASE 0x648
+#define MC_VIDEO_PROTECT_SIZE_MB 0x64c
+
+static inline uint32_t tegra_mc_read_32(uint32_t off)
+{
+ return mmio_read_32(TEGRA_MC_BASE + off);
+}
+
+static inline void tegra_mc_write_32(uint32_t off, uint32_t val)
+{
+ mmio_write_32(TEGRA_MC_BASE + off, val);
+}
+
+#endif /* __MEMCTRLV1_H__ */
BL31_SOURCES += lib/cpus/aarch64/denver.S \
${COMMON_DIR}/drivers/flowctrl/flowctrl.c \
+ ${COMMON_DIR}/drivers/memctrl/memctrl_v1.c \
${SOC_DIR}/plat_psci_handlers.c \
${SOC_DIR}/plat_sip_calls.c \
${SOC_DIR}/plat_setup.c \
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a57.S \
${COMMON_DIR}/drivers/flowctrl/flowctrl.c \
+ ${COMMON_DIR}/drivers/memctrl/memctrl_v1.c \
${SOC_DIR}/plat_psci_handlers.c \
${SOC_DIR}/plat_sip_calls.c \
${SOC_DIR}/plat_setup.c \
projects / project / bcm63xx / atf.git / commitdiff