if (wait_startup(chip, 0) != 0) {
rc = -ENODEV;
- goto out_err;
+ goto err_start;
}
/* Take control of the TPM's interrupt hardware and shut it off */
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
- goto out_err;
+ goto err_start;
intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
rc = tpm_chip_start(chip);
if (rc)
- goto out_err;
+ goto err_start;
+
rc = tpm2_probe(chip);
- tpm_chip_stop(chip);
if (rc)
- goto out_err;
+ goto err_probe;
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
- goto out_err;
+ goto err_probe;
priv->manufacturer_id = vendor;
rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
if (rc < 0)
- goto out_err;
+ goto err_probe;
dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
(chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
probe = probe_itpm(chip);
if (probe < 0) {
rc = -ENODEV;
- goto out_err;
+ goto err_probe;
}
/* Figure out the capabilities */
rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
if (rc < 0)
- goto out_err;
+ goto err_probe;
dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
intfcaps);
if (tpm_get_timeouts(chip)) {
dev_err(dev, "Could not get TPM timeouts and durations\n");
rc = -ENODEV;
- goto out_err;
+ goto err_probe;
}
- tpm_chip_start(chip);
chip->flags |= TPM_CHIP_FLAG_IRQ;
if (irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
} else {
tpm_tis_probe_irq(chip, intmask);
}
- tpm_chip_stop(chip);
}
+ tpm_chip_stop(chip);
+
rc = tpm_chip_register(chip);
if (rc)
- goto out_err;
-
- if (chip->ops->clk_enable != NULL)
- chip->ops->clk_enable(chip, false);
+ goto err_start;
return 0;
-out_err:
+
+err_probe:
+ tpm_chip_stop(chip);
+
+err_start:
if ((chip->ops != NULL) && (chip->ops->clk_enable != NULL))
chip->ops->clk_enable(chip, false);