ixp4xx: patch cleanup

roll all cambria patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33643

diff --git a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
index 3c6627cb35c273fd5e8e22e47663d076d70ba63b..dcd116e8d7c2b466f1b955599e4f4785bf55c4c7 100644 (file)
--- a/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
+++ b/target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
@@ -77,7 +77,7 @@
 +subsys_initcall(cambria_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,430 @@
+@@ -0,0 +1,574 @@
 +/*
 + * arch/arm/mach-ixp4xx/cambria-setup.c
 + *
@@ -92,11 +92,14 @@
 + */
 +
 +#include <linux/device.h>
++#include <linux/gpio_buttons.h>
 +#include <linux/i2c.h>
 +#include <linux/i2c-gpio.h>
 +#include <linux/i2c/at24.h>
++#include <linux/i2c/gw_i2c_pld.h>
 +#include <linux/if_ether.h>
 +#include <linux/init.h>
++#include <linux/input.h>
 +#include <linux/kernel.h>
 +#include <linux/leds.h>
 +#include <linux/memory.h>
@@ -114,6 +117,7 @@
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +#include <asm/setup.h>
++#include <linux/irq.h>
 +
 +struct cambria_board_info {
 +      unsigned char   *model;
@@ -207,6 +211,45 @@
 +      .resource       = &cambria_uart_resource,
 +};
 +
++static struct resource cambria_optional_uart_resources[] = {
++      {
++              .start  = 0x52000000,
++              .end    = 0x52000fff,
++              .flags  = IORESOURCE_MEM
++      },
++      {
++              .start  = 0x53000000,
++              .end    = 0x53000fff,
++              .flags  = IORESOURCE_MEM
++      }
++};
++
++static struct plat_serial8250_port cambria_optional_uart_data[] = {
++      {
++              .flags          = UPF_BOOT_AUTOCONF,
++              .iotype         = UPIO_MEM_DELAY,
++              .regshift       = 0,
++              .uartclk        = 1843200,
++              .rw_delay       = 2,
++      },
++      {
++              .flags          = UPF_BOOT_AUTOCONF,
++              .iotype         = UPIO_MEM_DELAY,
++              .regshift       = 0,
++              .uartclk        = 1843200,
++              .rw_delay       = 2,
++      },
++  { },
++};
++
++static struct platform_device cambria_optional_uart = {
++      .name           = "serial8250",
++      .id             = PLAT8250_DEV_PLATFORM1,
++      .dev.platform_data      = cambria_optional_uart_data,
++      .num_resources  = 2,
++      .resource       = cambria_optional_uart_resources,
++};
++
 +static struct resource cambria_pata_resources[] = {
 +      {
 +              .flags  = IORESOURCE_MEM
@@ -254,6 +297,20 @@
 +      .dev.platform_data = &cambria_gpio_leds_data,
 +};
 +
++static struct resource cambria_gpio_resources[] = {
++      {
++              .name = "gpio",
++              .flags  = 0,
++      },
++};
++
++static struct platform_device cambria_gpio = {
++      .name     = "GPIODEV",
++      .id     = -1,
++      .num_resources    = ARRAY_SIZE(cambria_gpio_resources),
++      .resource   = cambria_gpio_resources,
++};
++
 +static struct latch_led cambria_latch_leds[] = {
 +      {
 +              .name   = "ledA",  /* green led */
@@ -349,6 +406,39 @@
 +      },
 +};
 +
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
++      .gpio_base      = 16,
++      .nr_gpio        = 8,
++};
++
++static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
++      .gpio_base      = 24,
++      .nr_gpio        = 2,
++};
++
++
++static struct gpio_button cambria_gpio_buttons[] = {
++      {
++              .desc           = "user",
++              .type           = EV_KEY,
++              .code           = BTN_0,
++              .threshold      = 2,
++              .gpio           = 25,
++      }
++};
++
++static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
++      .poll_interval  = 500,
++      .nbuttons       = 1,
++      .buttons        = cambria_gpio_buttons,
++};
++
++static struct platform_device cambria_gpio_buttons_device = {
++      .name                   = "gpio-buttons",
++      .id                     = -1,
++      .dev.platform_data      = &cambria_gpio_buttons_data,
++};
++
 +static struct platform_device *cambria_devices[] __initdata = {
 +      &cambria_i2c_gpio,
 +      &cambria_flash,
@@ -357,12 +447,35 @@
 +
 +static void __init cambria_gw23xx_setup(void)
 +{
++      cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++                                                                                                                                              (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++      platform_device_register(&cambria_gpio);
 +      platform_device_register(&cambria_npec_device);
 +      platform_device_register(&cambria_npea_device);
 +}
 +
 +static void __init cambria_gw2350_setup(void)
 +{
++      *IXP4XX_EXP_CS2 = 0xBFFF3C43;
++      irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++      cambria_optional_uart_data[0].mapbase   = 0x52FF0000;
++      cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
++      cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
++
++      *IXP4XX_EXP_CS3 = 0xBFFF3C43;
++      irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++      cambria_optional_uart_data[1].mapbase   = 0x53FF0000;
++      cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
++      cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
++
++      cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
++                                                                                                                                              (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
++      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++      platform_device_register(&cambria_gpio);
++      platform_device_register(&cambria_optional_uart);
 +      platform_device_register(&cambria_npec_device);
 +      platform_device_register(&cambria_npea_device);
 +
@@ -374,6 +487,24 @@
 +
 +static void __init cambria_gw2358_setup(void)
 +{
++      *IXP4XX_EXP_CS3 = 0xBFFF3C43;
++      irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
++      cambria_optional_uart_data[0].mapbase   = 0x53FC0000;
++      cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
++      cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
++
++      irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
++      cambria_optional_uart_data[1].mapbase   = 0x53F80000;
++      cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53F80000, 0x0fff);
++      cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
++
++      cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
++                                                                                                                                              (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
++      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
++
++      platform_device_register(&cambria_gpio);
++      platform_device_register(&cambria_optional_uart);
++
 +      platform_device_register(&cambria_npec_device);
 +      platform_device_register(&cambria_npea_device);
 +
@@ -382,7 +513,12 @@
 +
 +      platform_device_register(&cambria_pata);
 +
++      cambria_gpio_leds[0].gpio = 24;
++      platform_device_register(&cambria_gpio_leds_device);
++
 +      platform_device_register(&cambria_latch_leds_device);
++
++      platform_device_register(&cambria_gpio_buttons_device);
 +}
 +
 +static struct cambria_board_info cambria_boards[] __initdata = {
@@ -451,6 +587,14 @@
 +              I2C_BOARD_INFO("24c08", 0x51),
 +              .platform_data  = &cambria_eeprom_info
 +      },
++      {
++              I2C_BOARD_INFO("gw_i2c_pld", 0x56),
++              .platform_data  = &gw_i2c_pld_data0,
++      },
++      {
++              I2C_BOARD_INFO("gw_i2c_pld", 0x57),
++              .platform_data  = &gw_i2c_pld_data1,
++      },
 +};
 +
 +static void __init cambria_init(void)

diff --git a/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch
deleted file mode 100644 (file)
index 130606f..0000000
--- a/target/linux/ixp4xx/patches-3.3/191-cambria_optional_uart.patch
+++ /dev/null
@@ -1,96 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -34,6 +34,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/setup.h>
-+#include <linux/irq.h>
- 
- struct cambria_board_info {
-       unsigned char   *model;
-@@ -127,6 +128,45 @@ static struct platform_device cambria_ua
-       .resource       = &cambria_uart_resource,
- };
- 
-+static struct resource cambria_optional_uart_resources[] = {
-+      {
-+              .start  = 0x52000000,
-+              .end    = 0x52000fff,
-+              .flags  = IORESOURCE_MEM
-+      },
-+      {
-+              .start  = 0x53000000,
-+              .end    = 0x53000fff,
-+              .flags  = IORESOURCE_MEM
-+      }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+      {
-+              .flags          = UPF_BOOT_AUTOCONF,
-+              .iotype         = UPIO_MEM_DELAY,
-+              .regshift       = 0,
-+              .uartclk        = 1843200,
-+              .rw_delay       = 2,
-+      },
-+      {
-+              .flags          = UPF_BOOT_AUTOCONF,
-+              .iotype         = UPIO_MEM_DELAY,
-+              .regshift       = 0,
-+              .uartclk        = 1843200,
-+              .rw_delay       = 2,
-+      },
-+  { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+      .name           = "serial8250",
-+      .id             = PLAT8250_DEV_PLATFORM1,
-+      .dev.platform_data      = cambria_optional_uart_data,
-+      .num_resources  = 2,
-+      .resource       = cambria_optional_uart_resources,
-+};
-+
- static struct resource cambria_pata_resources[] = {
-       {
-               .flags  = IORESOURCE_MEM
-@@ -283,6 +323,19 @@ static void __init cambria_gw23xx_setup(
- 
- static void __init cambria_gw2350_setup(void)
- {
-+      *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+      irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+      cambria_optional_uart_data[0].mapbase   = 0x52FF0000;
-+      cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+      cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
-+
-+      *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+      irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+      cambria_optional_uart_data[1].mapbase   = 0x53FF0000;
-+      cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+      cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
-+
-+      platform_device_register(&cambria_optional_uart);
-       platform_device_register(&cambria_npec_device);
-       platform_device_register(&cambria_npea_device);
- 
-@@ -294,6 +347,19 @@ static void __init cambria_gw2350_setup(
- 
- static void __init cambria_gw2358_setup(void)
- {
-+      *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+      irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+      cambria_optional_uart_data[0].mapbase   = 0x53FC0000;
-+      cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+      cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
-+
-+      irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+      cambria_optional_uart_data[1].mapbase   = 0x53F80000;
-+      cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+      cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
-+
-+      platform_device_register(&cambria_optional_uart);
-+
-       platform_device_register(&cambria_npec_device);
-       platform_device_register(&cambria_npea_device);
- 

diff --git a/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch b/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch
deleted file mode 100644 (file)
index d785c3a..0000000
--- a/target/linux/ixp4xx/patches-3.3/192-cambria_gpio_device.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -214,6 +214,20 @@ static struct platform_device cambria_gp
-       .dev.platform_data = &cambria_gpio_leds_data,
- };
- 
-+static struct resource cambria_gpio_resources[] = {
-+      {
-+              .name = "gpio",
-+              .flags  = 0,
-+      },
-+};
-+
-+static struct platform_device cambria_gpio = {
-+      .name     = "GPIODEV",
-+      .id     = -1,
-+      .num_resources    = ARRAY_SIZE(cambria_gpio_resources),
-+      .resource   = cambria_gpio_resources,
-+};
-+
- static struct latch_led cambria_latch_leds[] = {
-       {
-               .name   = "ledA",  /* green led */
-@@ -335,6 +349,11 @@ static void __init cambria_gw2350_setup(
-       cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-       cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
- 
-+      cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+                                                                                                                                              (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+      platform_device_register(&cambria_gpio);
-       platform_device_register(&cambria_optional_uart);
-       platform_device_register(&cambria_npec_device);
-       platform_device_register(&cambria_npea_device);
-@@ -358,6 +377,10 @@ static void __init cambria_gw2358_setup(
-       cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-       cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
- 
-+      cambria_gpio_resources[0].start = (1 << 14);
-+      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+      platform_device_register(&cambria_gpio);
-       platform_device_register(&cambria_optional_uart);
- 
-       platform_device_register(&cambria_npec_device);

diff --git a/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch
deleted file mode 100644 (file)
index 171898d..0000000
--- a/target/linux/ixp4xx/patches-3.3/193-cambria_pld_gpio.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -12,11 +12,14 @@
-  */
- 
- #include <linux/device.h>
-+#include <linux/gpio_buttons.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
- #include <linux/if_ether.h>
- #include <linux/init.h>
-+#include <linux/input.h>
- #include <linux/kernel.h>
- #include <linux/leds.h>
- #include <linux/memory.h>
-@@ -323,6 +326,39 @@ static struct platform_device cambria_us
-       },
- };
- 
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+      .gpio_base      = 16,
-+      .nr_gpio        = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+      .gpio_base      = 24,
-+      .nr_gpio        = 2,
-+};
-+
-+
-+static struct gpio_button cambria_gpio_buttons[] = {
-+      {
-+              .desc           = "user",
-+              .type           = EV_KEY,
-+              .code           = BTN_0,
-+              .threshold      = 2,
-+              .gpio           = 25,
-+      }
-+};
-+
-+static struct gpio_buttons_platform_data cambria_gpio_buttons_data = {
-+      .poll_interval  = 500,
-+      .nbuttons       = 1,
-+      .buttons        = cambria_gpio_buttons, 
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+      .name                   = "gpio-buttons",
-+      .id                     = -1,
-+      .dev.platform_data      = &cambria_gpio_buttons_data,
-+};
-+
- static struct platform_device *cambria_devices[] __initdata = {
-       &cambria_i2c_gpio,
-       &cambria_flash,
-@@ -331,6 +367,11 @@ static struct platform_device *cambria_d
- 
- static void __init cambria_gw23xx_setup(void)
- {
-+      cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+                                                                                                                                              (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+      cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+      platform_device_register(&cambria_gpio);
-       platform_device_register(&cambria_npec_device);
-       platform_device_register(&cambria_npea_device);
- }
-@@ -377,7 +418,8 @@ static void __init cambria_gw2358_setup(
-       cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-       cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
- 
--      cambria_gpio_resources[0].start = (1 << 14);
-+      cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+                                                                                                                                              (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
-       cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
- 
-       platform_device_register(&cambria_gpio);
-@@ -391,7 +433,12 @@ static void __init cambria_gw2358_setup(
- 
-       platform_device_register(&cambria_pata);
- 
-+      cambria_gpio_leds[0].gpio = 24;
-+      platform_device_register(&cambria_gpio_leds_device);
-+
-       platform_device_register(&cambria_latch_leds_device);
-+
-+      platform_device_register(&cambria_gpio_buttons_device);
- }
- 
- static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
-               I2C_BOARD_INFO("24c08", 0x51),
-               .platform_data  = &cambria_eeprom_info
-       },
-+      {
-+              I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+              .platform_data  = &gw_i2c_pld_data0,
-+      },
-+      {
-+              I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+              .platform_data  = &gw_i2c_pld_data1,
-+      },
- };
- 
- static void __init cambria_init(void)