Input: penmount - fix the protocol

The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index c7f9cebebbb6dbe5376e53407b44d4c41370aee8..3342c6d8e57dcf9f9af2b6586a94da0abb8e4ef2 100644 (file)
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -2,6 +2,7 @@
  * Penmount serial touchscreen driver
  *
  * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2011 John Sung <penmount.touch@gmail.com>
  *
  * Based on ELO driver (drivers/input/touchscreen/elo.c)
  * Copyright (c) 2004 Vojtech Pavlik
@@ -21,9 +22,10 @@
 #include <linux/serio.h>
 #include <linux/init.h>
 
-#define DRIVER_DESC    "Penmount serial touchscreen driver"
+#define DRIVER_DESC    "PenMount serial touchscreen driver"
 
 MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
@@ -55,8 +57,8 @@ static irqreturn_t pm_interrupt(struct serio *serio,
 
        if (pm->data[0] & 0x80) {
                if (PM_MAX_LENGTH == ++pm->idx) {
-                       input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
-                       input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
+                       input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]);
+                       input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]);
                        input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
                        input_sync(dev);
                        pm->idx = 0;
@@ -84,7 +86,7 @@ static void pm_disconnect(struct serio *serio)
 
 /*
  * pm_connect() is the routine that is called when someone adds a
- * new serio device that supports Gunze protocol and registers it as
+ * new serio device that supports PenMount protocol and registers it as
  * an input device.
  */
 
@@ -105,7 +107,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
        pm->dev = input_dev;
        snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
 
-       input_dev->name = "Penmount Serial TouchScreen";
+       input_dev->name = "PenMount Serial TouchScreen";
        input_dev->phys = pm->phys;
        input_dev->id.bustype = BUS_RS232;
        input_dev->id.vendor = SERIO_PENMOUNT;
@@ -155,7 +157,7 @@ MODULE_DEVICE_TABLE(serio, pm_serio_ids);
 
 static struct serio_driver pm_drv = {
        .driver         = {
-               .name   = "penmountlpc",
+               .name   = "serio-penmount",
        },
        .description    = DRIVER_DESC,
        .id_table       = pm_serio_ids,