/* #define DEBUG_BABOON */
/* #define DEBUG_IRQS */
-int baboon_present,baboon_active;
+int baboon_present;
volatile struct baboon *baboon;
irqreturn_t baboon_irq(int, void *);
baboon = (struct baboon *) BABOON_BASE;
baboon_present = 1;
- baboon_active = 0;
printk("Baboon detected at %p\n", baboon);
}
unsigned char events;
#ifdef DEBUG_IRQS
- printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X active %02X\n",
+ printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n",
(uint) baboon->mb_control, (uint) baboon->mb_ifr,
- (uint) baboon->mb_status, baboon_active);
+ (uint) baboon->mb_status);
#endif
if (!(events = baboon->mb_ifr & 0x07))
irq_num = IRQ_BABOON_0;
irq_bit = 1;
do {
- if (events & irq_bit/* & baboon_active*/) {
- baboon_active &= ~irq_bit;
+ if (events & irq_bit) {
baboon->mb_ifr &= ~irq_bit;
m68k_handle_int(irq_num);
- baboon_active |= irq_bit;
}
irq_bit <<= 1;
irq_num++;
}
void baboon_irq_enable(int irq) {
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
#endif
- baboon_active |= (1 << irq_idx);
+ /* FIXME: figure out how to mask and unmask baboon interrupt sources */
+ enable_irq(IRQ_NUBUS_C);
}
void baboon_irq_disable(int irq) {
- int irq_idx = IRQ_IDX(irq);
-
#ifdef DEBUG_IRQUSE
printk("baboon_irq_disable(%d)\n", irq);
#endif
- baboon_active &= ~(1 << irq_idx);
+ disable_irq(IRQ_NUBUS_C);
}
void baboon_irq_clear(int irq) {
oss->irq_pending &= ~OSS_IP_SOUND;
/* FIXME: call sound handler */
} else if (events & OSS_IP_SCSI) {
- oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED;
oss->irq_pending &= ~OSS_IP_SCSI;
m68k_handle_int(IRQ_MAC_SCSI);
- oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI;
} else {
/* FIXME: error check here? */
}
--i;
irq_bit >>= 1;
if (events & irq_bit) {
- oss->irq_level[i] = OSS_IRQLEV_DISABLED;
oss->irq_pending &= ~irq_bit;
m68k_handle_int(NUBUS_SOURCE_BASE + i);
- oss->irq_level[i] = OSS_IRQLEV_NUBUS;
}
} while(events & (irq_bit - 1));
return IRQ_HANDLED;
/*
* The generic VIA interrupt routines (shamelessly stolen from Alan Cox's
* via6522.c :-), disable/pending masks added.
- *
- * The new interrupt architecture in macints.c takes care of a lot of the
- * gruntwork for us, including tallying the interrupts and calling the
- * handlers on the linked list. All we need to do here is basically generate
- * the machspec interrupt number after clearing the interrupt.
*/
irqreturn_t via1_irq(int irq, void *dev_id)
irq_bit = 1;
do {
if (events & irq_bit) {
- via1[vIER] = irq_bit;
via1[vIFR] = irq_bit;
m68k_handle_int(irq_num);
- via1[vIER] = irq_bit | 0x80;
}
++irq_num;
irq_bit <<= 1;
irq_bit = 1;
do {
if (events & irq_bit) {
- via2[gIER] = irq_bit;
via2[gIFR] = irq_bit | rbv_clear;
m68k_handle_int(irq_num);
- if (irq_num != IRQ_MAC_NUBUS || nubus_disabled == 0)
- via2[gIER] = irq_bit | 0x80;
}
++irq_num;
irq_bit <<= 1;