config BOOT_RAW
bool
+config CEVT_BCM1480
+ bool
+
config CEVT_GT641XX
bool
config CEVT_R4K
bool
+config CEVT_SB1250
+ bool
+
config CEVT_TXX9
bool
+config CSRC_BCM1480
+ bool
+
+config CSRC_SB1250
+ bool
+
config CFE
bool
ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
+obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
+obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
+obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
+obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
--- /dev/null
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1480_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
+
+ sprintf(name, "bcm1480-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
+
+ bcm1480_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define IMR_IP2_VAL K_INT_MAP_I0
+#define IMR_IP3_VAL K_INT_MAP_I1
+#define IMR_IP4_VAL K_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1250_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ /* Only have 4 general purpose timers, and we use last one as hpt */
+ BUG_ON(cpu > 2);
+
+ sprintf(name, "sb1250-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ sb1250_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+ (irq << 3)));
+
+ sb1250_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
--- /dev/null
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+static cycle_t bcm1480_hpt_read(void)
+{
+ return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+struct clocksource bcm1480_clocksource = {
+ .name = "zbbus-cycles",
+ .rating = 200,
+ .read = bcm1480_hpt_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1480_clocksource;
+ unsigned int plldiv;
+ unsigned long zbbus;
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+ clocksource_set_clock(cs, zbbus);
+ clocksource_register(cs);
+}
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define SB1250_HPT_NUM 3
+#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
+
+/*
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again.
+ */
+static cycle_t sb1250_hpt_read(void)
+{
+ unsigned int count;
+
+ count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+ return SB1250_HPT_VALUE - count;
+}
+
+struct clocksource bcm1250_clocksource = {
+ .name = "MIPS",
+ .rating = 200,
+ .read = sb1250_hpt_read,
+ .mask = CLOCKSOURCE_MASK(23),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1250_clocksource;
+
+ /* Setup hpt using timer #3 but do not enable irq for it */
+ __raw_writeq(0,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+ __raw_writeq(SB1250_HPT_VALUE,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_INIT)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+
+ clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+ clocksource_register(cs);
+}
config SIBYTE_SB1250
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
config SIBYTE_BCM1120
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1125
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
config SIBYTE_BCM1125H
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
config SIBYTE_BCM112X
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x55
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
+#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-#include <asm/sibyte/bcm1480_scd.h>
-
-#include <asm/sibyte/sb1250.h>
-
-
-#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
-#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
-#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *cfg, *init;
-
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *cfg, *init;
-
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- __raw_writeq(delta - 1, init);
- __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
-
- return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
- void __iomem *cfg;
- unsigned long tmode;
-
- if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
- tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
- else
- tmode = 0;
-
- /* ACK interrupt */
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- ____raw_writeq(tmode, cfg);
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1480_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
-
- sprintf(name, "bcm1480-counter-%d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- bcm1480_mask_irq(cpu, irq);
-
- /*
- * Map the timer interrupt to IP[4] of this cpu
- */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(cpu,
- R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
-
- bcm1480_unmask_irq(cpu, irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, action);
-}
-
-static cycle_t bcm1480_hpt_read(void)
-{
- return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
-}
-
-struct clocksource bcm1480_clocksource = {
- .name = "zbbus-cycles",
- .rating = 200,
- .read = bcm1480_hpt_read,
- .mask = CLOCKSOURCE_MASK(64),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1480_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1480_clocksource;
- unsigned int plldiv;
- unsigned long zbbus;
-
- plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
- zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
-}
+extern void sb1480_clockevent_init(void);
+extern void sb1480_clocksource_init(void);
void __init plat_time_init(void)
{
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
+#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_scd.h>
-
-#define IMR_IP2_VAL K_INT_MAP_I0
-#define IMR_IP3_VAL K_INT_MAP_I1
-#define IMR_IP4_VAL K_INT_MAP_I2
-
-#define SB1250_HPT_NUM 3
-#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *cfg, *init;
-
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *cfg, *init;
-
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- __raw_writeq(delta - 1, init);
- __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
-
- return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
- void __iomem *cfg;
- unsigned long tmode;
-
- if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
- tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
- else
- tmode = 0;
-
- /* ACK interrupt */
- cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- ____raw_writeq(tmode, cfg);
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1250_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- /* Only have 4 general purpose timers, and we use last one as hpt */
- BUG_ON(cpu > 2);
-
- sprintf(name, "sb1250-counter-%d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- sb1250_mask_irq(cpu, irq);
-
- /*
- * Map the timer interrupt to IP[4] of this cpu
- */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
- (irq << 3)));
-
- sb1250_unmask_irq(cpu, irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, action);
-}
-
-/*
- * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
- * again.
- */
-static cycle_t sb1250_hpt_read(void)
-{
- unsigned int count;
-
- count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
-
- return SB1250_HPT_VALUE - count;
-}
-
-struct clocksource bcm1250_clocksource = {
- .name = "MIPS",
- .rating = 200,
- .read = sb1250_hpt_read,
- .mask = CLOCKSOURCE_MASK(23),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1250_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1250_clocksource;
-
- /* Setup hpt using timer #3 but do not enable irq for it */
- __raw_writeq(0,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
- __raw_writeq(SB1250_HPT_VALUE,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_INIT)));
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
-
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
-}
+extern void sb1250_clocksource_init(void);
+extern void sb1250_clockevent_init(void);
void __init plat_time_init(void)
{
projects / openwrt / staging / blogic.git / commitdiff