+++ /dev/null
-From 586f04ce6a391419ca3cc9cef6b6f38570cede88 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 2 Nov 2020 11:45:04 +0000
-Subject: [PATCH] net: usb: r8152: Provide missing documentation for
- some struct members
-
-commit 34e653efb602e0651867fb5ab14369b555a61dcd upstream.
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac'
- drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac'
- drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key'
- drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc'
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -899,6 +899,7 @@ struct fw_header {
- * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
- * The layout of the firmware block is:
- * <struct fw_mac> + <info> + <firmware data>.
-+ * @blk_hdr: firmware descriptor (type, length)
- * @fw_offset: offset of the firmware binary data. The start address of
- * the data would be the address of struct fw_mac + @fw_offset.
- * @fw_reg: the register to load the firmware. Depends on chip.
-@@ -912,6 +913,7 @@ struct fw_header {
- * @bp_num: the break point number which needs to be set for this firmware.
- * Depends on the firmware.
- * @bp: break points. Depends on firmware.
-+ * @reserved: reserved space (unused)
- * @fw_ver_reg: the register to store the fw version.
- * @fw_ver_data: the firmware version of the current type.
- * @info: additional information for debugging, and is followed by the
-@@ -937,8 +939,10 @@ struct fw_mac {
- /**
- * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
- * This is used to set patch key when loading the firmware of PHY.
-+ * @blk_hdr: firmware descriptor (type, length)
- * @key_reg: the register to write the patch key.
- * @key_data: patch key.
-+ * @reserved: reserved space (unused)
- */
- struct fw_phy_patch_key {
- struct fw_block blk_hdr;
-@@ -951,6 +955,7 @@ struct fw_phy_patch_key {
- * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
- * The layout of the firmware block is:
- * <struct fw_phy_nc> + <info> + <firmware data>.
-+ * @blk_hdr: firmware descriptor (type, length)
- * @fw_offset: offset of the firmware binary data. The start address of
- * the data would be the address of struct fw_phy_nc + @fw_offset.
- * @fw_reg: the register to load the firmware. Depends on chip.
-@@ -961,6 +966,7 @@ struct fw_phy_patch_key {
- * @mode_reg: the regitster of switching the mode.
- * @mod_pre: the mode needing to be set before loading the firmware.
- * @mod_post: the mode to be set when finishing to load the firmware.
-+ * @reserved: reserved space (unused)
- * @bp_start: the start register of break points. Depends on chip.
- * @bp_num: the break point number which needs to be set for this firmware.
- * Depends on the firmware.
+++ /dev/null
-From 5fcfa846181de6676509696c4cd7b60a22e74077 Mon Sep 17 00:00:00 2001
-From: Lee Jones <lee.jones@linaro.org>
-Date: Mon, 2 Nov 2020 11:45:09 +0000
-Subject: [PATCH] net: usb: r8152: Fix a couple of spelling errors in
- fw_phy_nc's docs
-
-commit 9f07814d01ad085b2d9f1d55b4ce532fb2c27110 upstream.
-
-Fixes the following W=1 kernel build warning(s):
-
- drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
- drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
-
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -964,8 +964,8 @@ struct fw_phy_patch_key {
- * @patch_en_addr: the register of enabling patch mode. Depends on chip.
- * @patch_en_value: patch mode enabled mask. Depends on the firmware.
- * @mode_reg: the regitster of switching the mode.
-- * @mod_pre: the mode needing to be set before loading the firmware.
-- * @mod_post: the mode to be set when finishing to load the firmware.
-+ * @mode_pre: the mode needing to be set before loading the firmware.
-+ * @mode_post: the mode to be set when finishing to load the firmware.
- * @reserved: reserved space (unused)
- * @bp_start: the start register of break points. Depends on chip.
- * @bp_num: the break point number which needs to be set for this firmware.
+++ /dev/null
-From 0ef50460f7f053bd2a911ec53e01bfda646a5574 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 4 Nov 2020 10:19:22 +0800
-Subject: [PATCH] net/usb/r8153_ecm: support ECM mode for RTL8153
-
-commit c1aedf015ebdd0232757a66e2daccf1246bd609c upstream.
-
-Support ECM mode based on cdc_ether with relative mii functions,
-when CONFIG_USB_RTL8152 is not set, or the device is not supported
-by r8152 driver.
-
-Both r8152 and r8153_ecm would check the return value of
-rtl8152_get_version() in porbe(). If rtl8152_get_version()
-return none zero value, the r8152 is used for the device
-with vendor mode. Otherwise, the r8153_ecm is used for the
-device with ECM mode.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/Makefile | 2 +-
- drivers/net/usb/r8152.c | 30 +------
- drivers/net/usb/r8153_ecm.c | 162 ++++++++++++++++++++++++++++++++++++
- include/linux/usb/r8152.h | 37 ++++++++
- 4 files changed, 204 insertions(+), 27 deletions(-)
- create mode 100644 drivers/net/usb/r8153_ecm.c
- create mode 100644 include/linux/usb/r8152.h
-
---- a/drivers/net/usb/Makefile
-+++ b/drivers/net/usb/Makefile
-@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o
- obj-$(CONFIG_USB_NET_AX8817X) += asix.o
- asix-y := asix_devices.o asix_common.o ax88172a.o
- obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
--obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
-+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o
- obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
- obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
- obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -27,6 +27,7 @@
- #include <linux/acpi.h>
- #include <linux/firmware.h>
- #include <crypto/hash.h>
-+#include <linux/usb/r8152.h>
-
- /* Information for net-next */
- #define NETNEXT_VERSION "11"
-@@ -654,18 +655,6 @@ enum rtl_register_content {
-
- #define INTR_LINK 0x0004
-
--#define RTL8152_REQT_READ 0xc0
--#define RTL8152_REQT_WRITE 0x40
--#define RTL8152_REQ_GET_REGS 0x05
--#define RTL8152_REQ_SET_REGS 0x05
--
--#define BYTE_EN_DWORD 0xff
--#define BYTE_EN_WORD 0x33
--#define BYTE_EN_BYTE 0x11
--#define BYTE_EN_SIX_BYTES 0x3f
--#define BYTE_EN_START_MASK 0x0f
--#define BYTE_EN_END_MASK 0xf0
--
- #define RTL8153_MAX_PACKET 9216 /* 9K */
- #define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
- ETH_FCS_LEN)
-@@ -690,21 +679,9 @@ enum rtl8152_flags {
- LENOVO_MACPASSTHRU,
- };
-
--/* Define these values to match your device */
--#define VENDOR_ID_REALTEK 0x0bda
--#define VENDOR_ID_MICROSOFT 0x045e
--#define VENDOR_ID_SAMSUNG 0x04e8
--#define VENDOR_ID_LENOVO 0x17ef
--#define VENDOR_ID_LINKSYS 0x13b1
--#define VENDOR_ID_NVIDIA 0x0955
--#define VENDOR_ID_TPLINK 0x2357
--
- #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082
- #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2 0xa387
-
--#define MCU_TYPE_PLA 0x0100
--#define MCU_TYPE_USB 0x0000
--
- struct tally_counter {
- __le64 tx_packets;
- __le64 rx_packets;
-@@ -6625,7 +6602,7 @@ static int rtl_fw_init(struct r8152 *tp)
- return 0;
- }
-
--static u8 rtl_get_version(struct usb_interface *intf)
-+u8 rtl8152_get_version(struct usb_interface *intf)
- {
- struct usb_device *udev = interface_to_usbdev(intf);
- u32 ocp_data = 0;
-@@ -6683,12 +6660,13 @@ static u8 rtl_get_version(struct usb_int
-
- return version;
- }
-+EXPORT_SYMBOL_GPL(rtl8152_get_version);
-
- static int rtl8152_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
- {
- struct usb_device *udev = interface_to_usbdev(intf);
-- u8 version = rtl_get_version(intf);
-+ u8 version = rtl8152_get_version(intf);
- struct r8152 *tp;
- struct net_device *netdev;
- int ret;
---- /dev/null
-+++ b/drivers/net/usb/r8153_ecm.c
-@@ -0,0 +1,162 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/mii.h>
-+#include <linux/usb.h>
-+#include <linux/usb/cdc.h>
-+#include <linux/usb/usbnet.h>
-+#include <linux/usb/r8152.h>
-+
-+#define OCP_BASE 0xe86c
-+
-+static int pla_read_word(struct usbnet *dev, u16 index)
-+{
-+ u16 byen = BYTE_EN_WORD;
-+ u8 shift = index & 2;
-+ __le32 tmp;
-+ int ret;
-+
-+ if (shift)
-+ byen <<= shift;
-+
-+ index &= ~3;
-+
-+ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
-+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+ if (ret < 0)
-+ goto out;
-+
-+ ret = __le32_to_cpu(tmp);
-+ ret >>= (shift * 8);
-+ ret &= 0xffff;
-+
-+out:
-+ return ret;
-+}
-+
-+static int pla_write_word(struct usbnet *dev, u16 index, u32 data)
-+{
-+ u32 mask = 0xffff;
-+ u16 byen = BYTE_EN_WORD;
-+ u8 shift = index & 2;
-+ __le32 tmp;
-+ int ret;
-+
-+ data &= mask;
-+
-+ if (shift) {
-+ byen <<= shift;
-+ mask <<= (shift * 8);
-+ data <<= (shift * 8);
-+ }
-+
-+ index &= ~3;
-+
-+ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
-+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+
-+ if (ret < 0)
-+ goto out;
-+
-+ data |= __le32_to_cpu(tmp) & ~mask;
-+ tmp = __cpu_to_le32(data);
-+
-+ ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index,
-+ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
-+
-+out:
-+ return ret;
-+}
-+
-+static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg)
-+{
-+ struct usbnet *dev = netdev_priv(netdev);
-+ int ret;
-+
-+ ret = pla_write_word(dev, OCP_BASE, 0xa000);
-+ if (ret < 0)
-+ goto out;
-+
-+ ret = pla_read_word(dev, 0xb400 + reg * 2);
-+
-+out:
-+ return ret;
-+}
-+
-+static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
-+{
-+ struct usbnet *dev = netdev_priv(netdev);
-+ int ret;
-+
-+ ret = pla_write_word(dev, OCP_BASE, 0xa000);
-+ if (ret < 0)
-+ return;
-+
-+ ret = pla_write_word(dev, 0xb400 + reg * 2, val);
-+}
-+
-+static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
-+{
-+ int status;
-+
-+ status = usbnet_cdc_bind(dev, intf);
-+ if (status < 0)
-+ return status;
-+
-+ dev->mii.dev = dev->net;
-+ dev->mii.mdio_read = r8153_ecm_mdio_read;
-+ dev->mii.mdio_write = r8153_ecm_mdio_write;
-+ dev->mii.reg_num_mask = 0x1f;
-+ dev->mii.supports_gmii = 1;
-+
-+ return status;
-+}
-+
-+static const struct driver_info r8153_info = {
-+ .description = "RTL8153 ECM Device",
-+ .flags = FLAG_ETHER,
-+ .bind = r8153_bind,
-+ .unbind = usbnet_cdc_unbind,
-+ .status = usbnet_cdc_status,
-+ .manage_power = usbnet_manage_power,
-+};
-+
-+static const struct usb_device_id products[] = {
-+{
-+ USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
-+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-+ .driver_info = (unsigned long)&r8153_info,
-+},
-+
-+ { }, /* END */
-+};
-+MODULE_DEVICE_TABLE(usb, products);
-+
-+static int rtl8153_ecm_probe(struct usb_interface *intf,
-+ const struct usb_device_id *id)
-+{
-+#if IS_REACHABLE(CONFIG_USB_RTL8152)
-+ if (rtl8152_get_version(intf))
-+ return -ENODEV;
-+#endif
-+
-+ return usbnet_probe(intf, id);
-+}
-+
-+static struct usb_driver r8153_ecm_driver = {
-+ .name = "r8153_ecm",
-+ .id_table = products,
-+ .probe = rtl8153_ecm_probe,
-+ .disconnect = usbnet_disconnect,
-+ .suspend = usbnet_suspend,
-+ .resume = usbnet_resume,
-+ .reset_resume = usbnet_resume,
-+ .supports_autosuspend = 1,
-+ .disable_hub_initiated_lpm = 1,
-+};
-+
-+module_usb_driver(r8153_ecm_driver);
-+
-+MODULE_AUTHOR("Hayes Wang");
-+MODULE_DESCRIPTION("Realtek USB ECM device");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/usb/r8152.h
-@@ -0,0 +1,37 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved.
-+ */
-+
-+#ifndef __LINUX_R8152_H
-+#define __LINUX_R8152_H
-+
-+#define RTL8152_REQT_READ 0xc0
-+#define RTL8152_REQT_WRITE 0x40
-+#define RTL8152_REQ_GET_REGS 0x05
-+#define RTL8152_REQ_SET_REGS 0x05
-+
-+#define BYTE_EN_DWORD 0xff
-+#define BYTE_EN_WORD 0x33
-+#define BYTE_EN_BYTE 0x11
-+#define BYTE_EN_SIX_BYTES 0x3f
-+#define BYTE_EN_START_MASK 0x0f
-+#define BYTE_EN_END_MASK 0xf0
-+
-+#define MCU_TYPE_PLA 0x0100
-+#define MCU_TYPE_USB 0x0000
-+
-+/* Define these values to match your device */
-+#define VENDOR_ID_REALTEK 0x0bda
-+#define VENDOR_ID_MICROSOFT 0x045e
-+#define VENDOR_ID_SAMSUNG 0x04e8
-+#define VENDOR_ID_LENOVO 0x17ef
-+#define VENDOR_ID_LINKSYS 0x13b1
-+#define VENDOR_ID_NVIDIA 0x0955
-+#define VENDOR_ID_TPLINK 0x2357
-+
-+#if IS_REACHABLE(CONFIG_USB_RTL8152)
-+extern u8 rtl8152_get_version(struct usb_interface *intf);
-+#endif
-+
-+#endif /* __LINUX_R8152_H */
+++ /dev/null
-From 90f1afc7f96c8f7cf19c82e5f4b39e61a63b053d Mon Sep 17 00:00:00 2001
-From: Emil Renner Berthing <kernel@esmil.dk>
-Date: Sun, 31 Jan 2021 00:47:29 +0100
-Subject: [PATCH] net: usb: r8152: use new tasklet API
-
-commit f3163f1cb87141c7a41a15a5d4c98b353f807b04 upstream.
-
-This converts the driver to use the new tasklet API introduced in
-commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
-
-Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2394,11 +2394,9 @@ static void tx_bottom(struct r8152 *tp)
- } while (res == 0);
- }
-
--static void bottom_half(unsigned long data)
-+static void bottom_half(struct tasklet_struct *t)
- {
-- struct r8152 *tp;
--
-- tp = (struct r8152 *)data;
-+ struct r8152 *tp = from_tasklet(tp, t, tx_tl);
-
- if (test_bit(RTL8152_UNPLUG, &tp->flags))
- return;
-@@ -6718,7 +6716,7 @@ static int rtl8152_probe(struct usb_inte
- mutex_init(&tp->control);
- INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
- INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
-- tasklet_init(&tp->tx_tl, bottom_half, (unsigned long)tp);
-+ tasklet_setup(&tp->tx_tl, bottom_half);
- tasklet_disable(&tp->tx_tl);
-
- netdev->netdev_ops = &rtl8152_netdev_ops;
+++ /dev/null
-From 86b98abf4f8c691c260c5113d6a2d32f5377caca Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 3 Feb 2021 17:14:28 +0800
-Subject: [PATCH] r8152: replace several functions about phy patch
- request
-
-commit a08c0d309d8c078d22717d815cf9853f6f2c07bd upstream.
-
-Replace r8153_patch_request() with rtl_phy_patch_request().
-Replace r8153_pre_ram_code() with rtl_pre_ram_code().
-Replace r8153_post_ram_code() with rtl_post_ram_code().
-Add rtl_patch_key_set().
-
-The new functions have an additional parameter. It is used to wait
-the patch request command finished. When the PHY is resumed from
-the state of power cut, the PHY is at a safe mode and the
-OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is
-safe to set patch request command without waiting OCP_PHY_PATCH_STAT.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 84 ++++++++++++++++++++++++-----------------
- 1 file changed, 50 insertions(+), 34 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -3444,59 +3444,76 @@ static void rtl_clear_bp(struct r8152 *t
- ocp_write_word(tp, type, PLA_BP_BA, 0);
- }
-
--static int r8153_patch_request(struct r8152 *tp, bool request)
-+static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
- {
-- u16 data;
-+ u16 data, check;
- int i;
-
- data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
-- if (request)
-+ if (request) {
- data |= PATCH_REQUEST;
-- else
-+ check = 0;
-+ } else {
- data &= ~PATCH_REQUEST;
-+ check = PATCH_READY;
-+ }
- ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
-
-- for (i = 0; request && i < 5000; i++) {
-+ for (i = 0; wait && i < 5000; i++) {
-+ u32 ocp_data;
-+
- usleep_range(1000, 2000);
-- if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
-+ ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
-+ if ((ocp_data & PATCH_READY) ^ check)
- break;
- }
-
-- if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
-- netif_err(tp, drv, tp->netdev, "patch request fail\n");
-- r8153_patch_request(tp, false);
-+ if (request && wait &&
-+ !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
-+ dev_err(&tp->intf->dev, "PHY patch request fail\n");
-+ rtl_phy_patch_request(tp, false, false);
- return -ETIME;
- } else {
- return 0;
- }
- }
-
--static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key)
-+static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
- {
-- if (r8153_patch_request(tp, true)) {
-- dev_err(&tp->intf->dev, "patch request fail\n");
-- return -ETIME;
-- }
-+ if (patch_key && key_addr) {
-+ sram_write(tp, key_addr, patch_key);
-+ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
-+ } else if (key_addr) {
-+ u16 data;
-
-- sram_write(tp, key_addr, patch_key);
-- sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
-+ sram_write(tp, 0x0000, 0x0000);
-
-- return 0;
-+ data = ocp_reg_read(tp, OCP_PHY_LOCK);
-+ data &= ~PATCH_LOCK;
-+ ocp_reg_write(tp, OCP_PHY_LOCK, data);
-+
-+ sram_write(tp, key_addr, 0x0000);
-+ } else {
-+ WARN_ON_ONCE(1);
-+ }
- }
-
--static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)
-+static int
-+rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
- {
-- u16 data;
-+ if (rtl_phy_patch_request(tp, true, wait))
-+ return -ETIME;
-
-- sram_write(tp, 0x0000, 0x0000);
-+ rtl_patch_key_set(tp, key_addr, patch_key);
-
-- data = ocp_reg_read(tp, OCP_PHY_LOCK);
-- data &= ~PATCH_LOCK;
-- ocp_reg_write(tp, OCP_PHY_LOCK, data);
-+ return 0;
-+}
-
-- sram_write(tp, key_addr, 0x0000);
-+static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
-+{
-+ rtl_patch_key_set(tp, key_addr, 0);
-
-- r8153_patch_request(tp, false);
-+ rtl_phy_patch_request(tp, false, wait);
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-
-@@ -3981,7 +3998,7 @@ static void rtl8152_fw_mac_apply(struct
- dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
- }
-
--static void rtl8152_apply_firmware(struct r8152 *tp)
-+static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
- {
- struct rtl_fw *rtl_fw = &tp->rtl_fw;
- const struct firmware *fw;
-@@ -4012,12 +4029,11 @@ static void rtl8152_apply_firmware(struc
- case RTL_FW_PHY_START:
- key = (struct fw_phy_patch_key *)block;
- key_addr = __le16_to_cpu(key->key_reg);
-- r8153_pre_ram_code(tp, key_addr,
-- __le16_to_cpu(key->key_data));
-+ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
- break;
- case RTL_FW_PHY_STOP:
- WARN_ON(!key_addr);
-- r8153_post_ram_code(tp, key_addr);
-+ rtl_post_ram_code(tp, key_addr, !power_cut);
- break;
- case RTL_FW_PHY_NC:
- rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
-@@ -4222,7 +4238,7 @@ static void rtl8152_disable(struct r8152
-
- static void r8152b_hw_phy_cfg(struct r8152 *tp)
- {
-- rtl8152_apply_firmware(tp);
-+ rtl8152_apply_firmware(tp, false);
- rtl_eee_enable(tp, tp->eee_en);
- r8152_aldps_en(tp, true);
- r8152b_enable_fc(tp);
-@@ -4504,7 +4520,7 @@ static void r8153_hw_phy_cfg(struct r815
- /* disable EEE before updating the PHY parameters */
- rtl_eee_enable(tp, false);
-
-- rtl8152_apply_firmware(tp);
-+ rtl8152_apply_firmware(tp, false);
-
- if (tp->version == RTL_VER_03) {
- data = ocp_reg_read(tp, OCP_EEE_CFG);
-@@ -4578,7 +4594,7 @@ static void r8153b_hw_phy_cfg(struct r81
- /* disable EEE before updating the PHY parameters */
- rtl_eee_enable(tp, false);
-
-- rtl8152_apply_firmware(tp);
-+ rtl8152_apply_firmware(tp, false);
-
- r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-
-@@ -4619,7 +4635,7 @@ static void r8153b_hw_phy_cfg(struct r81
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-
- /* Advnace EEE */
-- if (!r8153_patch_request(tp, true)) {
-+ if (!rtl_phy_patch_request(tp, true, true)) {
- data = ocp_reg_read(tp, OCP_POWER_CFG);
- data |= EEE_CLKDIV_EN;
- ocp_reg_write(tp, OCP_POWER_CFG, data);
-@@ -4636,7 +4652,7 @@ static void r8153b_hw_phy_cfg(struct r81
- ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
- tp->ups_info._250m_ckdiv = true;
-
-- r8153_patch_request(tp, false);
-+ rtl_phy_patch_request(tp, false, true);
- }
-
- if (tp->eee_en)
+++ /dev/null
-From 29a61d8564ad3439d03c7ec135016a4e70072af1 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 3 Feb 2021 17:14:29 +0800
-Subject: [PATCH] r8152: adjust the flow of power cut for RTL8153B
-
-commit 80fd850b31f09263ad175b2f640d5c5c6f76ed41 upstream.
-
-For runtime resuming, the RTL8153B may be resumed from the state
-of power cut, when enabling the feature of UPS. Then, the PHY
-would be reset, so it is necessary to be initailized again.
-
-Besides, the USB_U1U2_TIMER also has to be set again, so I move
-it from r8153b_init() to r8153b_hw_phy_cfg().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++-----------------
- 1 file changed, 40 insertions(+), 28 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -1372,6 +1372,10 @@ void write_mii_word(struct net_device *n
- static int
- r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
-
-+static int
-+rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
-+ u32 advertising);
-+
- static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
- {
- struct r8152 *tp = netdev_priv(netdev);
-@@ -3183,8 +3187,6 @@ static void r8153b_ups_en(struct r8152 *
- ocp_data |= BIT(0);
- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
- } else {
-- u16 data;
--
- ocp_data &= ~(UPS_EN | USP_PREWAKE);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-
-@@ -3192,31 +3194,20 @@ static void r8153b_ups_en(struct r8152 *
- ocp_data &= ~BIT(0);
- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
-
-- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-- ocp_data &= ~PCUT_STATUS;
-- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+ int i;
-
-- data = r8153_phy_status(tp, 0);
-+ for (i = 0; i < 500; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+ AUTOLOAD_DONE)
-+ break;
-+ msleep(20);
-+ }
-
-- switch (data) {
-- case PHY_STAT_PWRDN:
-- case PHY_STAT_EXT_INIT:
-- r8153b_green_en(tp,
-- test_bit(GREEN_ETHERNET, &tp->flags));
--
-- data = r8152_mdio_read(tp, MII_BMCR);
-- data &= ~BMCR_PDOWN;
-- data |= BMCR_RESET;
-- r8152_mdio_write(tp, MII_BMCR, data);
-+ tp->rtl_ops.hw_phy_cfg(tp);
-
-- data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-- fallthrough;
--
-- default:
-- if (data != PHY_STAT_LAN_ON)
-- netif_warn(tp, link, tp->netdev,
-- "PHY not ready");
-- break;
-+ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+ tp->duplex, tp->advertising);
- }
- }
- }
-@@ -4588,13 +4579,37 @@ static void r8153b_hw_phy_cfg(struct r81
- u32 ocp_data;
- u16 data;
-
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+ if (ocp_data & PCUT_STATUS) {
-+ ocp_data &= ~PCUT_STATUS;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+ }
-+
- /* disable ALDPS before updating the PHY parameters */
- r8153_aldps_en(tp, false);
-
- /* disable EEE before updating the PHY parameters */
- rtl_eee_enable(tp, false);
-
-- rtl8152_apply_firmware(tp, false);
-+ /* U1/U2/L1 idle timer. 500 us */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+ data = r8153_phy_status(tp, 0);
-+
-+ switch (data) {
-+ case PHY_STAT_PWRDN:
-+ case PHY_STAT_EXT_INIT:
-+ rtl8152_apply_firmware(tp, true);
-+
-+ data = r8152_mdio_read(tp, MII_BMCR);
-+ data &= ~BMCR_PDOWN;
-+ r8152_mdio_write(tp, MII_BMCR, data);
-+ break;
-+ case PHY_STAT_LAN_ON:
-+ default:
-+ rtl8152_apply_firmware(tp, false);
-+ break;
-+ }
-
- r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-
-@@ -5543,9 +5558,6 @@ static void r8153b_init(struct r8152 *tp
- /* MSC timer = 0xfff * 8ms = 32760 ms */
- ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-
-- /* U1/U2/L1 idle timer. 500 us */
-- ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
--
- r8153b_power_cut_en(tp, false);
- r8153b_ups_en(tp, false);
- r8153_queue_wake(tp, false);
+++ /dev/null
-From 69b4339c0b9f3edc6a8f681f05efaaf4add1bb0e Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:40 +0800
-Subject: [PATCH] r8152: enable U1/U2 for USB_SPEED_SUPER
-
-commit 7a0ae61acde2cebd69665837170405eced86a6c7 upstream.
-
-U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't
-support it.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -3336,7 +3336,7 @@ static void rtl8153b_runtime_enable(stru
- r8153b_ups_en(tp, false);
- r8153_queue_wake(tp, false);
- rtl_runtime_suspend_enable(tp, false);
-- if (tp->udev->speed != USB_SPEED_HIGH)
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
- r8153b_u1u2en(tp, true);
- }
- }
-@@ -5029,7 +5029,7 @@ static void rtl8153b_up(struct r8152 *tp
-
- r8153_aldps_en(tp, true);
-
-- if (tp->udev->speed != USB_SPEED_HIGH)
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
- r8153b_u1u2en(tp, true);
- }
-
-@@ -5571,8 +5571,9 @@ static void r8153b_init(struct r8152 *tp
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-
-- if (tp->udev->speed != USB_SPEED_HIGH)
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
- r8153b_u1u2en(tp, true);
-+
- usb_enable_lpm(tp->udev);
-
- /* MAC clock speed down */
+++ /dev/null
-From e78b75f5be204a0a235da995d01c778dc282bb42 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:41 +0800
-Subject: [PATCH] r8152: check if the pointer of the function exists
-
-commit c79515e47935c747282c6ed2ee5b2ef039756eeb upstream.
-
-Return error code if autosuspend_en, eee_get, or eee_set don't exist.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -5758,6 +5758,9 @@ static int rtl8152_runtime_suspend(struc
- struct net_device *netdev = tp->netdev;
- int ret = 0;
-
-+ if (!tp->rtl_ops.autosuspend_en)
-+ return -EBUSY;
-+
- set_bit(SELECTIVE_SUSPEND, &tp->flags);
- smp_mb__after_atomic();
-
-@@ -6157,6 +6160,11 @@ rtl_ethtool_get_eee(struct net_device *n
- struct r8152 *tp = netdev_priv(net);
- int ret;
-
-+ if (!tp->rtl_ops.eee_get) {
-+ ret = -EOPNOTSUPP;
-+ goto out;
-+ }
-+
- ret = usb_autopm_get_interface(tp->intf);
- if (ret < 0)
- goto out;
-@@ -6179,6 +6187,11 @@ rtl_ethtool_set_eee(struct net_device *n
- struct r8152 *tp = netdev_priv(net);
- int ret;
-
-+ if (!tp->rtl_ops.eee_set) {
-+ ret = -EOPNOTSUPP;
-+ goto out;
-+ }
-+
- ret = usb_autopm_get_interface(tp->intf);
- if (ret < 0)
- goto out;
+++ /dev/null
-From 38e44c7926512cff0b2809dc329de2a8e769e523 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:42 +0800
-Subject: [PATCH] r8152: replace netif_err with dev_err
-
-commit 156c3207611262266f0eea589ac3f00c5657320e upstream.
-
-Some messages are before calling register_netdev(), so replace
-netif_err() with dev_err().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -6594,7 +6594,7 @@ static int rtl_ops_init(struct r8152 *tp
-
- default:
- ret = -ENODEV;
-- netif_err(tp, probe, tp->netdev, "Unknown Device\n");
-+ dev_err(&tp->intf->dev, "Unknown Device\n");
- break;
- }
-
-@@ -6851,7 +6851,7 @@ static int rtl8152_probe(struct usb_inte
-
- ret = register_netdev(netdev);
- if (ret != 0) {
-- netif_err(tp, probe, netdev, "couldn't register the device\n");
-+ dev_err(&intf->dev, "couldn't register the device\n");
- goto out1;
- }
-
+++ /dev/null
-From 260814de2d6cb958767785ffcb2e76915d1be32b Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 19 Feb 2021 17:04:43 +0800
-Subject: [PATCH] r8152: spilt rtl_set_eee_plus and r8153b_green_en
-
-commit 40fa7568ac230446d888b7ad402cff9e20fe3ad5 upstream.
-
-Add rtl_eee_plus_en() and rtl_green_en().
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++---------------
- 1 file changed, 27 insertions(+), 16 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2633,21 +2633,24 @@ static inline u8 rtl8152_get_speed(struc
- return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
- }
-
--static void rtl_set_eee_plus(struct r8152 *tp)
-+static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
- {
- u32 ocp_data;
-- u8 speed;
-
-- speed = rtl8152_get_speed(tp);
-- if (speed & _10bps) {
-- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+ if (enable)
- ocp_data |= EEEP_CR_EEEP_TX;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
-- } else {
-- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-+ else
- ocp_data &= ~EEEP_CR_EEEP_TX;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
-- }
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
-+}
-+
-+static void rtl_set_eee_plus(struct r8152 *tp)
-+{
-+ if (rtl8152_get_speed(tp) & _10bps)
-+ rtl_eee_plus_en(tp, true);
-+ else
-+ rtl_eee_plus_en(tp, false);
- }
-
- static void rxdy_gated_en(struct r8152 *tp, bool enable)
-@@ -3128,10 +3131,22 @@ static void r8153b_ups_flags(struct r815
- ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
- }
-
--static void r8153b_green_en(struct r8152 *tp, bool enable)
-+static void rtl_green_en(struct r8152 *tp, bool enable)
- {
- u16 data;
-
-+ data = sram_read(tp, SRAM_GREEN_CFG);
-+ if (enable)
-+ data |= GREEN_ETH_EN;
-+ else
-+ data &= ~GREEN_ETH_EN;
-+ sram_write(tp, SRAM_GREEN_CFG, data);
-+
-+ tp->ups_info.green = enable;
-+}
-+
-+static void r8153b_green_en(struct r8152 *tp, bool enable)
-+{
- if (enable) {
- sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */
- sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
-@@ -3142,11 +3157,7 @@ static void r8153b_green_en(struct r8152
- sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
- }
-
-- data = sram_read(tp, SRAM_GREEN_CFG);
-- data |= GREEN_ETH_EN;
-- sram_write(tp, SRAM_GREEN_CFG, data);
--
-- tp->ups_info.green = enable;
-+ rtl_green_en(tp, true);
- }
-
- static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
+++ /dev/null
-From f1bbbb260a8016373adf239c716d2da90e6ced0b Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:32 +0800
-Subject: [PATCH] r8152: set inter fram gap time depending on speed
-
-commit 5133bcc7481528e36fff0a3b056601efb704fb32 upstream.
-
-Set the maximum inter frame gap time (144ns) for speed 10M/half and
-100M/half. It improves the performance for those speeds. And, there
-is no effect for the other speeds.
-
-For 10M/half and 100M/half, the fast inter frame gap time let the
-device couldn't use the feature of the aggregation effectively,
-because the transfer would be completed fastly. Therefore, use the
-maximum value to improve the effect of the aggregation. However, you
-may not feel the improvement for fast CPUs, because they compensate
-for the effect of the aggregation.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -250,6 +250,9 @@
-
- /* PLA_TCR1 */
- #define VERSION_MASK 0x7cf0
-+#define IFG_MASK (BIT(3) | BIT(9) | BIT(8))
-+#define IFG_144NS BIT(9)
-+#define IFG_96NS (BIT(9) | BIT(8))
-
- /* PLA_MTPS */
- #define MTPS_JUMBO (12 * 1024 / 64)
-@@ -2748,6 +2751,29 @@ static int rtl_stop_rx(struct r8152 *tp)
- return 0;
- }
-
-+static void rtl_set_ifg(struct r8152 *tp, u16 speed)
-+{
-+ u32 ocp_data;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
-+ ocp_data &= ~IFG_MASK;
-+ if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
-+ ocp_data |= IFG_144NS;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ ocp_data &= ~TX10MIDLE_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+ } else {
-+ ocp_data |= IFG_96NS;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ ocp_data |= TX10MIDLE_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+ }
-+}
-+
- static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
- {
- ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
-@@ -2851,6 +2877,8 @@ static int rtl8153_enable(struct r8152 *
- r8153_set_rx_early_timeout(tp);
- r8153_set_rx_early_size(tp);
-
-+ rtl_set_ifg(tp, rtl8152_get_speed(tp));
-+
- if (tp->version == RTL_VER_09) {
- u32 ocp_data;
-
+++ /dev/null
-From f10c9edf47d3fa240d965e151a48c670f5035b73 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:33 +0800
-Subject: [PATCH] r8152: adjust rtl8152_check_firmware function
-
-commit a8a7be178e81a3d4b6972cbeb0ccd091ca2f9f89 upstream.
-
-Use bits operations to record and check the firmware.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 51 +++++++++++++++++++++++------------------
- 1 file changed, 29 insertions(+), 22 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -875,6 +875,14 @@ struct fw_header {
- struct fw_block blocks[];
- } __packed;
-
-+enum rtl8152_fw_flags {
-+ FW_FLAGS_USB = 0,
-+ FW_FLAGS_PLA,
-+ FW_FLAGS_START,
-+ FW_FLAGS_STOP,
-+ FW_FLAGS_NC,
-+};
-+
- /**
- * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
- * The layout of the firmware block is:
-@@ -3801,10 +3809,7 @@ static long rtl8152_check_firmware(struc
- {
- const struct firmware *fw = rtl_fw->fw;
- struct fw_header *fw_hdr = (struct fw_header *)fw->data;
-- struct fw_mac *pla = NULL, *usb = NULL;
-- struct fw_phy_patch_key *start = NULL;
-- struct fw_phy_nc *phy_nc = NULL;
-- struct fw_block *stop = NULL;
-+ unsigned long fw_flags = 0;
- long ret = -EFAULT;
- int i;
-
-@@ -3833,50 +3838,52 @@ static long rtl8152_check_firmware(struc
- goto fail;
- goto fw_end;
- case RTL_FW_PLA:
-- if (pla) {
-+ if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple PLA firmware encountered");
- goto fail;
- }
-
-- pla = (struct fw_mac *)block;
-- if (!rtl8152_is_fw_mac_ok(tp, pla)) {
-+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- dev_err(&tp->intf->dev,
- "check PLA firmware failed\n");
- goto fail;
- }
-+ __set_bit(FW_FLAGS_PLA, &fw_flags);
- break;
- case RTL_FW_USB:
-- if (usb) {
-+ if (test_bit(FW_FLAGS_USB, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple USB firmware encountered");
- goto fail;
- }
-
-- usb = (struct fw_mac *)block;
-- if (!rtl8152_is_fw_mac_ok(tp, usb)) {
-+ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
- dev_err(&tp->intf->dev,
- "check USB firmware failed\n");
- goto fail;
- }
-+ __set_bit(FW_FLAGS_USB, &fw_flags);
- break;
- case RTL_FW_PHY_START:
-- if (start || phy_nc || stop) {
-+ if (test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "check PHY_START fail\n");
- goto fail;
- }
-
-- if (__le32_to_cpu(block->length) != sizeof(*start)) {
-+ if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
- dev_err(&tp->intf->dev,
- "Invalid length for PHY_START\n");
- goto fail;
- }
--
-- start = (struct fw_phy_patch_key *)block;
-+ __set_bit(FW_FLAGS_START, &fw_flags);
- break;
- case RTL_FW_PHY_STOP:
-- if (stop || !start) {
-+ if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
-+ !test_bit(FW_FLAGS_START, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "Check PHY_STOP fail\n");
- goto fail;
-@@ -3887,28 +3894,28 @@ static long rtl8152_check_firmware(struc
- "Invalid length for PHY_STOP\n");
- goto fail;
- }
--
-- stop = block;
-+ __set_bit(FW_FLAGS_STOP, &fw_flags);
- break;
- case RTL_FW_PHY_NC:
-- if (!start || stop) {
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "check PHY_NC fail\n");
- goto fail;
- }
-
-- if (phy_nc) {
-+ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "multiple PHY NC encountered\n");
- goto fail;
- }
-
-- phy_nc = (struct fw_phy_nc *)block;
-- if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) {
-+ if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
- dev_err(&tp->intf->dev,
- "check PHY NC firmware failed\n");
- goto fail;
- }
-+ __set_bit(FW_FLAGS_NC, &fw_flags);
-
- break;
- default:
-@@ -3922,7 +3929,7 @@ static long rtl8152_check_firmware(struc
- }
-
- fw_end:
-- if ((phy_nc || start) && !stop) {
-+ if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev, "without PHY_STOP\n");
- goto fail;
- }
+++ /dev/null
-From f010a7d51cbb42bdb956f0a28b8868b15d7a3816 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:34 +0800
-Subject: [PATCH] r8152: add help function to change mtu
-
-commit 67ce1a806f164e59a074fea8809725d3411eaa20 upstream.
-
-The different chips may have different requests when changing mtu.
-Therefore, add a new help function of rtl_ops to change mtu. Besides,
-reset the tx/rx after changing mtu.
-
-Additionally, add mtu_to_size() and size_to_mtu() macros to simplify
-the code.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 53 ++++++++++++++++++++++++-----------------
- 1 file changed, 31 insertions(+), 22 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -658,15 +658,13 @@ enum rtl_register_content {
-
- #define INTR_LINK 0x0004
-
--#define RTL8153_MAX_PACKET 9216 /* 9K */
--#define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
-- ETH_FCS_LEN)
- #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
- #define RTL8153_RMS RTL8153_MAX_PACKET
- #define RTL8152_TX_TIMEOUT (5 * HZ)
- #define RTL8152_NAPI_WEIGHT 64
--#define rx_reserved_size(x) ((x) + VLAN_ETH_HLEN + ETH_FCS_LEN + \
-- sizeof(struct rx_desc) + RX_ALIGN)
-+#define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
-+#define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
-+#define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
-
- /* rtl8152 flags */
- enum rtl8152_flags {
-@@ -796,6 +794,7 @@ struct r8152 {
- bool (*in_nway)(struct r8152 *tp);
- void (*hw_phy_cfg)(struct r8152 *tp);
- void (*autosuspend_en)(struct r8152 *tp, bool enable);
-+ void (*change_mtu)(struct r8152 *tp);
- } rtl_ops;
-
- struct ups_info {
-@@ -1022,8 +1021,7 @@ enum tx_csum_stat {
- static const int multicast_filter_limit = 32;
- static unsigned int agg_buf_sz = 16384;
-
--#define RTL_LIMITED_TSO_SIZE (agg_buf_sz - sizeof(struct tx_desc) - \
-- VLAN_ETH_HLEN - ETH_FCS_LEN)
-+#define RTL_LIMITED_TSO_SIZE (size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
-
- static
- int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
-@@ -2633,10 +2631,7 @@ static void rtl8152_nic_reset(struct r81
-
- static void set_tx_qlen(struct r8152 *tp)
- {
-- struct net_device *netdev = tp->netdev;
--
-- tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
-- sizeof(struct tx_desc));
-+ tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
- }
-
- static inline u8 rtl8152_get_speed(struct r8152 *tp)
-@@ -4725,6 +4720,12 @@ static void r8153b_hw_phy_cfg(struct r81
- set_bit(PHY_RESET, &tp->flags);
- }
-
-+static void rtl8153_change_mtu(struct r8152 *tp)
-+{
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+}
-+
- static void r8153_first_init(struct r8152 *tp)
- {
- u32 ocp_data;
-@@ -4757,9 +4758,7 @@ static void r8153_first_init(struct r815
-
- rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
-
-- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
-- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+ rtl8153_change_mtu(tp);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
- ocp_data |= TCR0_AUTO_FIFO;
-@@ -4794,8 +4793,7 @@ static void r8153_enter_oob(struct r8152
-
- wait_oob_link_list_ready(tp);
-
-- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-
- switch (tp->version) {
- case RTL_VER_03:
-@@ -6518,12 +6516,21 @@ static int rtl8152_change_mtu(struct net
- dev->mtu = new_mtu;
-
- if (netif_running(dev)) {
-- u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
--
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms);
-+ if (tp->rtl_ops.change_mtu)
-+ tp->rtl_ops.change_mtu(tp);
-
-- if (netif_carrier_ok(dev))
-- r8153_set_rx_early_size(tp);
-+ if (netif_carrier_ok(dev)) {
-+ netif_stop_queue(dev);
-+ napi_disable(&tp->napi);
-+ tasklet_disable(&tp->tx_tl);
-+ tp->rtl_ops.disable(tp);
-+ tp->rtl_ops.enable(tp);
-+ rtl_start_rx(tp);
-+ tasklet_enable(&tp->tx_tl);
-+ napi_enable(&tp->napi);
-+ rtl8152_set_rx_mode(dev);
-+ netif_wake_queue(dev);
-+ }
- }
-
- mutex_unlock(&tp->control);
-@@ -6612,6 +6619,7 @@ static int rtl_ops_init(struct r8152 *tp
- ops->in_nway = rtl8153_in_nway;
- ops->hw_phy_cfg = r8153_hw_phy_cfg;
- ops->autosuspend_en = rtl8153_runtime_enable;
-+ ops->change_mtu = rtl8153_change_mtu;
- if (tp->udev->speed < USB_SPEED_SUPER)
- tp->rx_buf_sz = 16 * 1024;
- else
-@@ -6633,6 +6641,7 @@ static int rtl_ops_init(struct r8152 *tp
- ops->in_nway = rtl8153_in_nway;
- ops->hw_phy_cfg = r8153b_hw_phy_cfg;
- ops->autosuspend_en = rtl8153b_runtime_enable;
-+ ops->change_mtu = rtl8153_change_mtu;
- tp->rx_buf_sz = 32 * 1024;
- tp->eee_en = true;
- tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
-@@ -6853,7 +6862,7 @@ static int rtl8152_probe(struct usb_inte
- netdev->max_mtu = ETH_DATA_LEN;
- break;
- default:
-- netdev->max_mtu = RTL8153_MAX_MTU;
-+ netdev->max_mtu = size_to_mtu(9 * 1024);
- break;
- }
-
+++ /dev/null
-From e7439e7fd384f55f55837f7e4866e74d8dca3827 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:35 +0800
-Subject: [PATCH] r8152: support new chips
-
-commit 195aae321c829dd1945900d75561e6aa79cce208 upstream.
-
-Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A
-and RTL8156B are the 2.5G ethernet.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 2634 +++++++++++++++++++++++++++++++++++----
- 1 file changed, 2359 insertions(+), 275 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -44,10 +44,14 @@
-
- #define PLA_IDR 0xc000
- #define PLA_RCR 0xc010
-+#define PLA_RCR1 0xc012
- #define PLA_RMS 0xc016
- #define PLA_RXFIFO_CTRL0 0xc0a0
-+#define PLA_RXFIFO_FULL 0xc0a2
- #define PLA_RXFIFO_CTRL1 0xc0a4
-+#define PLA_RX_FIFO_FULL 0xc0a6
- #define PLA_RXFIFO_CTRL2 0xc0a8
-+#define PLA_RX_FIFO_EMPTY 0xc0aa
- #define PLA_DMY_REG0 0xc0b0
- #define PLA_FMC 0xc0b4
- #define PLA_CFG_WOL 0xc0b6
-@@ -64,6 +68,8 @@
- #define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
- #define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
- #define PLA_EXTRA_STATUS 0xd398
-+#define PLA_GPHY_CTRL 0xd3ae
-+#define PLA_POL_GPIO_CTRL 0xdc6a
- #define PLA_EFUSE_DATA 0xdd00
- #define PLA_EFUSE_CMD 0xdd02
- #define PLA_LEDSEL 0xdd90
-@@ -73,6 +79,8 @@
- #define PLA_LWAKE_CTRL_REG 0xe007
- #define PLA_GPHY_INTR_IMR 0xe022
- #define PLA_EEE_CR 0xe040
-+#define PLA_EEE_TXTWSYS 0xe04c
-+#define PLA_EEE_TXTWSYS_2P5G 0xe058
- #define PLA_EEEP_CR 0xe080
- #define PLA_MAC_PWR_CTRL 0xe0c0
- #define PLA_MAC_PWR_CTRL2 0xe0ca
-@@ -83,6 +91,7 @@
- #define PLA_TCR1 0xe612
- #define PLA_MTPS 0xe615
- #define PLA_TXFIFO_CTRL 0xe618
-+#define PLA_TXFIFO_FULL 0xe61a
- #define PLA_RSTTALLY 0xe800
- #define PLA_CR 0xe813
- #define PLA_CRWECR 0xe81c
-@@ -99,6 +108,7 @@
- #define PLA_SFF_STS_7 0xe8de
- #define PLA_PHYSTATUS 0xe908
- #define PLA_CONFIG6 0xe90a /* CONFIG6 */
-+#define PLA_USB_CFG 0xe952
- #define PLA_BP_BA 0xfc26
- #define PLA_BP_0 0xfc28
- #define PLA_BP_1 0xfc2a
-@@ -113,6 +123,7 @@
- #define USB_USB2PHY 0xb41e
- #define USB_SSPHYLINK1 0xb426
- #define USB_SSPHYLINK2 0xb428
-+#define USB_L1_CTRL 0xb45e
- #define USB_U2P3_CTRL 0xb460
- #define USB_CSR_DUMMY1 0xb464
- #define USB_CSR_DUMMY2 0xb466
-@@ -123,7 +134,12 @@
- #define USB_FW_FIX_EN0 0xcfca
- #define USB_FW_FIX_EN1 0xcfcc
- #define USB_LPM_CONFIG 0xcfd8
-+#define USB_ECM_OPTION 0xcfee
- #define USB_CSTMR 0xcfef /* RTL8153A */
-+#define USB_MISC_2 0xcfff
-+#define USB_ECM_OP 0xd26b
-+#define USB_GPHY_CTRL 0xd284
-+#define USB_SPEED_OPTION 0xd32a
- #define USB_FW_CTRL 0xd334 /* RTL8153B */
- #define USB_FC_TIMER 0xd340
- #define USB_USB_CTRL 0xd406
-@@ -137,16 +153,20 @@
- #define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
- #define USB_TX_DMA 0xd434
- #define USB_UPT_RXDMA_OWN 0xd437
-+#define USB_UPHY3_MDCMDIO 0xd480
- #define USB_TOLERANCE 0xd490
- #define USB_LPM_CTRL 0xd41a
- #define USB_BMU_RESET 0xd4b0
-+#define USB_BMU_CONFIG 0xd4b4
- #define USB_U1U2_TIMER 0xd4da
- #define USB_FW_TASK 0xd4e8 /* RTL8153B */
-+#define USB_RX_AGGR_NUM 0xd4ee
- #define USB_UPS_CTRL 0xd800
- #define USB_POWER_CUT 0xd80a
- #define USB_MISC_0 0xd81a
- #define USB_MISC_1 0xd81f
- #define USB_AFE_CTRL2 0xd824
-+#define USB_UPHY_XTAL 0xd826
- #define USB_UPS_CFG 0xd842
- #define USB_UPS_FLAGS 0xd848
- #define USB_WDT1_CTRL 0xe404
-@@ -189,6 +209,9 @@
- #define OCP_EEE_ABLE 0xa5c4
- #define OCP_EEE_ADV 0xa5d0
- #define OCP_EEE_LPABLE 0xa5d2
-+#define OCP_10GBT_CTRL 0xa5d4
-+#define OCP_10GBT_STAT 0xa5d6
-+#define OCP_EEE_ADV2 0xa6d4
- #define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
- #define OCP_PHY_PATCH_STAT 0xb800
- #define OCP_PHY_PATCH_CMD 0xb820
-@@ -200,6 +223,7 @@
- /* SRAM Register */
- #define SRAM_GREEN_CFG 0x8011
- #define SRAM_LPF_CFG 0x8012
-+#define SRAM_GPHY_FW_VER 0x801e
- #define SRAM_10M_AMP1 0x8080
- #define SRAM_10M_AMP2 0x8082
- #define SRAM_IMPEDANCE 0x8084
-@@ -211,11 +235,19 @@
- #define RCR_AM 0x00000004
- #define RCR_AB 0x00000008
- #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
-+#define SLOT_EN BIT(11)
-+
-+/* PLA_RCR1 */
-+#define OUTER_VLAN BIT(7)
-+#define INNER_VLAN BIT(6)
-
- /* PLA_RXFIFO_CTRL0 */
- #define RXFIFO_THR1_NORMAL 0x00080002
- #define RXFIFO_THR1_OOB 0x01800003
-
-+/* PLA_RXFIFO_FULL */
-+#define RXFIFO_FULL_MASK 0xfff
-+
- /* PLA_RXFIFO_CTRL1 */
- #define RXFIFO_THR2_FULL 0x00000060
- #define RXFIFO_THR2_HIGH 0x00000038
-@@ -286,6 +318,7 @@
- #define MCU_BORW_EN 0x4000
-
- /* PLA_CPCR */
-+#define FLOW_CTRL_EN BIT(0)
- #define CPCR_RX_VLAN 0x0040
-
- /* PLA_CFG_WOL */
-@@ -311,6 +344,10 @@
- /* PLA_CONFIG6 */
- #define LANWAKE_CLR_EN BIT(0)
-
-+/* PLA_USB_CFG */
-+#define EN_XG_LIP BIT(1)
-+#define EN_G_LIP BIT(2)
-+
- /* PLA_CONFIG5 */
- #define BWF_EN 0x0040
- #define MWF_EN 0x0020
-@@ -334,6 +371,7 @@
- /* PLA_MAC_PWR_CTRL2 */
- #define EEE_SPDWN_RATIO 0x8007
- #define MAC_CLK_SPDWN_EN BIT(15)
-+#define EEE_SPDWN_RATIO_MASK 0xff
-
- /* PLA_MAC_PWR_CTRL3 */
- #define PLA_MCU_SPDWN_EN BIT(14)
-@@ -346,6 +384,7 @@
- #define PWRSAVE_SPDWN_EN 0x1000
- #define RXDV_SPDWN_EN 0x0800
- #define TX10MIDLE_EN 0x0100
-+#define IDLE_SPDWN_EN BIT(6)
- #define TP100_SPDWN_EN 0x0020
- #define TP500_SPDWN_EN 0x0010
- #define TP1000_SPDWN_EN 0x0008
-@@ -386,6 +425,13 @@
- #define LINK_CHANGE_FLAG BIT(8)
- #define POLL_LINK_CHG BIT(0)
-
-+/* PLA_GPHY_CTRL */
-+#define GPHY_FLASH BIT(1)
-+
-+/* PLA_POL_GPIO_CTRL */
-+#define DACK_DET_EN BIT(15)
-+#define POL_GPHY_PATCH BIT(4)
-+
- /* USB_USB2PHY */
- #define USB2PHY_SUSPEND 0x0001
- #define USB2PHY_L1 0x0002
-@@ -434,6 +480,9 @@
- #define BMU_RESET_EP_IN 0x01
- #define BMU_RESET_EP_OUT 0x02
-
-+/* USB_BMU_CONFIG */
-+#define ACT_ODMA BIT(1)
-+
- /* USB_UPT_RXDMA_OWN */
- #define OWN_UPDATE BIT(0)
- #define OWN_CLEAR BIT(1)
-@@ -441,27 +490,52 @@
- /* USB_FW_TASK */
- #define FC_PATCH_TASK BIT(1)
-
-+/* USB_RX_AGGR_NUM */
-+#define RX_AGGR_NUM_MASK 0x1ff
-+
- /* USB_UPS_CTRL */
- #define POWER_CUT 0x0100
-
- /* USB_PM_CTRL_STATUS */
- #define RESUME_INDICATE 0x0001
-
-+/* USB_ECM_OPTION */
-+#define BYPASS_MAC_RESET BIT(5)
-+
- /* USB_CSTMR */
- #define FORCE_SUPER BIT(0)
-
-+/* USB_MISC_2 */
-+#define UPS_FORCE_PWR_DOWN BIT(0)
-+
-+/* USB_ECM_OP */
-+#define EN_ALL_SPEED BIT(0)
-+
-+/* USB_GPHY_CTRL */
-+#define GPHY_PATCH_DONE BIT(2)
-+#define BYPASS_FLASH BIT(5)
-+#define BACKUP_RESTRORE BIT(6)
-+
-+/* USB_SPEED_OPTION */
-+#define RG_PWRDN_EN BIT(8)
-+#define ALL_SPEED_OFF BIT(9)
-+
- /* USB_FW_CTRL */
- #define FLOW_CTRL_PATCH_OPT BIT(1)
-+#define AUTO_SPEEDUP BIT(3)
-+#define FLOW_CTRL_PATCH_2 BIT(8)
-
- /* USB_FC_TIMER */
- #define CTRL_TIMER_EN BIT(15)
-
- /* USB_USB_CTRL */
-+#define CDC_ECM_EN BIT(3)
- #define RX_AGG_DISABLE 0x0010
- #define RX_ZERO_EN 0x0080
-
- /* USB_U2P3_CTRL */
- #define U2P3_ENABLE 0x0001
-+#define RX_DETECT8 BIT(3)
-
- /* USB_POWER_CUT */
- #define PWR_EN 0x0001
-@@ -497,8 +571,12 @@
- #define SEN_VAL_NORMAL 0xa000
- #define SEL_RXIDLE 0x0100
-
-+/* USB_UPHY_XTAL */
-+#define OOBS_POLLING BIT(8)
-+
- /* USB_UPS_CFG */
- #define SAW_CNT_1MS_MASK 0x0fff
-+#define MID_REVERSE BIT(5) /* RTL8156A */
-
- /* USB_UPS_FLAGS */
- #define UPS_FLAGS_R_TUNE BIT(0)
-@@ -506,6 +584,7 @@
- #define UPS_FLAGS_250M_CKDIV BIT(2)
- #define UPS_FLAGS_EN_ALDPS BIT(3)
- #define UPS_FLAGS_CTAP_SHORT_DIS BIT(4)
-+#define UPS_FLAGS_SPEED_MASK (0xf << 16)
- #define ups_flags_speed(x) ((x) << 16)
- #define UPS_FLAGS_EN_EEE BIT(20)
- #define UPS_FLAGS_EN_500M_EEE BIT(21)
-@@ -526,6 +605,8 @@ enum spd_duplex {
- FORCE_10M_FULL,
- FORCE_100M_HALF,
- FORCE_100M_FULL,
-+ FORCE_1000M_FULL,
-+ NWAY_2500M_FULL,
- };
-
- /* OCP_ALDPS_CONFIG */
-@@ -590,6 +671,9 @@ enum spd_duplex {
- #define EN_10M_CLKDIV BIT(11)
- #define EN_10M_BGOFF 0x0080
-
-+/* OCP_10GBT_CTRL */
-+#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */
-+
- /* OCP_PHY_STATE */
- #define TXDIS_STATE 0x01
- #define ABD_STATE 0x02
-@@ -609,7 +693,8 @@ enum spd_duplex {
- #define EN_EMI_L 0x0040
-
- /* OCP_SYSCLK_CFG */
--#define clk_div_expo(x) (min(x, 5) << 8)
-+#define sysclk_div_expo(x) (min(x, 5) << 8)
-+#define clk_div_expo(x) (min(x, 5) << 4)
-
- /* SRAM_GREEN_CFG */
- #define GREEN_ETH_EN BIT(15)
-@@ -640,6 +725,11 @@ enum spd_duplex {
- #define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
-
- enum rtl_register_content {
-+ _2500bps = BIT(10),
-+ _1250bps = BIT(9),
-+ _500bps = BIT(8),
-+ _tx_flow = BIT(6),
-+ _rx_flow = BIT(5),
- _1000bps = 0x10,
- _100bps = 0x08,
- _10bps = 0x04,
-@@ -647,6 +737,9 @@ enum rtl_register_content {
- FULL_DUP = 0x01,
- };
-
-+#define is_speed_2500(_speed) (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
-+#define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
-+
- #define RTL8152_MAX_TX 4
- #define RTL8152_MAX_RX 10
- #define INTBUFSIZE 2
-@@ -661,7 +754,6 @@ enum rtl_register_content {
- #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
- #define RTL8153_RMS RTL8153_MAX_PACKET
- #define RTL8152_TX_TIMEOUT (5 * HZ)
--#define RTL8152_NAPI_WEIGHT 64
- #define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
- #define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
- #define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
-@@ -798,6 +890,7 @@ struct r8152 {
- } rtl_ops;
-
- struct ups_info {
-+ u32 r_tune:1;
- u32 _10m_ckdiv:1;
- u32 _250m_ckdiv:1;
- u32 aldps:1;
-@@ -839,7 +932,9 @@ struct r8152 {
- u32 rx_buf_sz;
- u32 rx_copybreak;
- u32 rx_pending;
-+ u32 fc_pause_on, fc_pause_off;
-
-+ u32 support_2500full:1;
- u16 ocp_base;
- u16 speed;
- u16 eee_adv;
-@@ -999,6 +1094,15 @@ enum rtl_version {
- RTL_VER_07,
- RTL_VER_08,
- RTL_VER_09,
-+
-+ RTL_TEST_01,
-+ RTL_VER_10,
-+ RTL_VER_11,
-+ RTL_VER_12,
-+ RTL_VER_13,
-+ RTL_VER_14,
-+ RTL_VER_15,
-+
- RTL_VER_MAX
- };
-
-@@ -1014,6 +1118,7 @@ enum tx_csum_stat {
- #define RTL_ADVERTISED_100_FULL BIT(3)
- #define RTL_ADVERTISED_1000_HALF BIT(4)
- #define RTL_ADVERTISED_1000_FULL BIT(5)
-+#define RTL_ADVERTISED_2500_FULL BIT(6)
-
- /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
- * The RTL chips use a 64 element hash table based on the Ethernet CRC.
-@@ -2607,7 +2712,7 @@ static netdev_tx_t rtl8152_start_xmit(st
-
- static void r8152b_reset_packet_filter(struct r8152 *tp)
- {
-- u32 ocp_data;
-+ u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
- ocp_data &= ~FMC_FCR_MCU_EN;
-@@ -2618,14 +2723,47 @@ static void r8152b_reset_packet_filter(s
-
- static void rtl8152_nic_reset(struct r8152 *tp)
- {
-- int i;
-+ u32 ocp_data;
-+ int i;
-
-- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
-+ switch (tp->version) {
-+ case RTL_TEST_01:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
-+ ocp_data &= ~CR_TE;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
-+ ocp_data &= ~BMU_RESET_EP_IN;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+ ocp_data |= CDC_ECM_EN;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
-+ ocp_data &= ~CR_RE;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
-+ ocp_data |= BMU_RESET_EP_IN;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+ ocp_data &= ~CDC_ECM_EN;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+ break;
-
-- for (i = 0; i < 1000; i++) {
-- if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
-- break;
-- usleep_range(100, 400);
-+ default:
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
-+
-+ for (i = 0; i < 1000; i++) {
-+ if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
-+ break;
-+ usleep_range(100, 400);
-+ }
-+ break;
- }
- }
-
-@@ -2634,9 +2772,9 @@ static void set_tx_qlen(struct r8152 *tp
- tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
- }
-
--static inline u8 rtl8152_get_speed(struct r8152 *tp)
-+static inline u16 rtl8152_get_speed(struct r8152 *tp)
- {
-- return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
-+ return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
- }
-
- static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
-@@ -2796,6 +2934,7 @@ static int rtl_enable(struct r8152 *tp)
- switch (tp->version) {
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_14:
- r8153b_rx_agg_chg_indicate(tp);
- break;
- default:
-@@ -2833,6 +2972,7 @@ static void r8153_set_rx_early_timeout(s
-
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_14:
- /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
- * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
- */
-@@ -2842,6 +2982,18 @@ static void r8153_set_rx_early_timeout(s
- ocp_data);
- break;
-
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
-+ 640 / 8);
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
-+ ocp_data);
-+ r8153b_rx_agg_chg_indicate(tp);
-+ break;
-+
- default:
- break;
- }
-@@ -2861,8 +3013,19 @@ static void r8153_set_rx_early_size(stru
- break;
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_14:
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
-+ ocp_data / 8);
-+ break;
-+ case RTL_TEST_01:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
- ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
- ocp_data / 8);
-+ r8153b_rx_agg_chg_indicate(tp);
- break;
- default:
- WARN_ON_ONCE(1);
-@@ -2872,6 +3035,8 @@ static void r8153_set_rx_early_size(stru
-
- static int rtl8153_enable(struct r8152 *tp)
- {
-+ u32 ocp_data;
-+
- if (test_bit(RTL8152_UNPLUG, &tp->flags))
- return -ENODEV;
-
-@@ -2882,15 +3047,18 @@ static int rtl8153_enable(struct r8152 *
-
- rtl_set_ifg(tp, rtl8152_get_speed(tp));
-
-- if (tp->version == RTL_VER_09) {
-- u32 ocp_data;
--
-+ switch (tp->version) {
-+ case RTL_VER_09:
-+ case RTL_VER_14:
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data &= ~FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
- usleep_range(1000, 2000);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+ break;
-+ default:
-+ break;
- }
-
- return rtl_enable(tp);
-@@ -2955,12 +3123,40 @@ static void rtl_rx_vlan_en(struct r8152
- {
- u32 ocp_data;
-
-- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
-- if (enable)
-- ocp_data |= CPCR_RX_VLAN;
-- else
-- ocp_data &= ~CPCR_RX_VLAN;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+ switch (tp->version) {
-+ case RTL_VER_01:
-+ case RTL_VER_02:
-+ case RTL_VER_03:
-+ case RTL_VER_04:
-+ case RTL_VER_05:
-+ case RTL_VER_06:
-+ case RTL_VER_07:
-+ case RTL_VER_08:
-+ case RTL_VER_09:
-+ case RTL_VER_14:
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
-+ if (enable)
-+ ocp_data |= CPCR_RX_VLAN;
-+ else
-+ ocp_data &= ~CPCR_RX_VLAN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+ break;
-+
-+ case RTL_TEST_01:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ default:
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
-+ if (enable)
-+ ocp_data |= OUTER_VLAN | INNER_VLAN;
-+ else
-+ ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
-+ break;
-+ }
- }
-
- static int rtl8152_set_features(struct net_device *dev,
-@@ -3053,6 +3249,40 @@ static void __rtl_set_wol(struct r8152 *
- device_set_wakeup_enable(&tp->udev->dev, false);
- }
-
-+static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
-+{
-+ u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+
-+ /* MAC clock speed down */
-+ if (enable)
-+ ocp_data |= MAC_CLK_SPDWN_EN;
-+ else
-+ ocp_data &= ~MAC_CLK_SPDWN_EN;
-+
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+}
-+
-+static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
-+{
-+ u32 ocp_data;
-+
-+ /* MAC clock speed down */
-+ if (enable) {
-+ /* aldps_spdwn_ratio, tp10_spdwn_ratio */
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
-+ 0x0403);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+ ocp_data &= ~EEE_SPDWN_RATIO_MASK;
-+ ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+ } else {
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-+ ocp_data &= ~MAC_CLK_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+ }
-+}
-+
- static void r8153_u1u2en(struct r8152 *tp, bool enable)
- {
- u8 u1u2[8];
-@@ -3112,6 +3342,9 @@ static void r8153b_ups_flags(struct r815
- if (tp->ups_info.eee_cmod_lv)
- ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
-
-+ if (tp->ups_info.r_tune)
-+ ups_flags |= UPS_FLAGS_R_TUNE;
-+
- if (tp->ups_info._10m_ckdiv)
- ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
-
-@@ -3162,6 +3395,88 @@ static void r8153b_ups_flags(struct r815
- ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
- }
-
-+static void r8156_ups_flags(struct r8152 *tp)
-+{
-+ u32 ups_flags = 0;
-+
-+ if (tp->ups_info.green)
-+ ups_flags |= UPS_FLAGS_EN_GREEN;
-+
-+ if (tp->ups_info.aldps)
-+ ups_flags |= UPS_FLAGS_EN_ALDPS;
-+
-+ if (tp->ups_info.eee)
-+ ups_flags |= UPS_FLAGS_EN_EEE;
-+
-+ if (tp->ups_info.flow_control)
-+ ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
-+
-+ if (tp->ups_info.eee_ckdiv)
-+ ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
-+
-+ if (tp->ups_info._10m_ckdiv)
-+ ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
-+
-+ if (tp->ups_info.eee_plloff_100)
-+ ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
-+
-+ if (tp->ups_info.eee_plloff_giga)
-+ ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
-+
-+ if (tp->ups_info._250m_ckdiv)
-+ ups_flags |= UPS_FLAGS_250M_CKDIV;
-+
-+ switch (tp->ups_info.speed_duplex) {
-+ case FORCE_10M_HALF:
-+ ups_flags |= ups_flags_speed(0);
-+ break;
-+ case FORCE_10M_FULL:
-+ ups_flags |= ups_flags_speed(1);
-+ break;
-+ case FORCE_100M_HALF:
-+ ups_flags |= ups_flags_speed(2);
-+ break;
-+ case FORCE_100M_FULL:
-+ ups_flags |= ups_flags_speed(3);
-+ break;
-+ case NWAY_10M_HALF:
-+ ups_flags |= ups_flags_speed(4);
-+ break;
-+ case NWAY_10M_FULL:
-+ ups_flags |= ups_flags_speed(5);
-+ break;
-+ case NWAY_100M_HALF:
-+ ups_flags |= ups_flags_speed(6);
-+ break;
-+ case NWAY_100M_FULL:
-+ ups_flags |= ups_flags_speed(7);
-+ break;
-+ case NWAY_1000M_FULL:
-+ ups_flags |= ups_flags_speed(8);
-+ break;
-+ case NWAY_2500M_FULL:
-+ ups_flags |= ups_flags_speed(9);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ switch (tp->ups_info.lite_mode) {
-+ case 1:
-+ ups_flags |= 0 << 5;
-+ break;
-+ case 2:
-+ ups_flags |= 2 << 5;
-+ break;
-+ case 0:
-+ default:
-+ ups_flags |= 1 << 5;
-+ break;
-+ }
-+
-+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
-+}
-+
- static void rtl_green_en(struct r8152 *tp, bool enable)
- {
- u16 data;
-@@ -3225,16 +3540,16 @@ static void r8153b_ups_en(struct r8152 *
- ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-
-- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
-- ocp_data |= BIT(0);
-- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data |= UPS_FORCE_PWR_DOWN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
- } else {
- ocp_data &= ~(UPS_EN | USP_PREWAKE);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-
-- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
-- ocp_data &= ~BIT(0);
-- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-
- if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
- int i;
-@@ -3254,6 +3569,95 @@ static void r8153b_ups_en(struct r8152 *
- }
- }
-
-+static void r8153c_ups_en(struct r8152 *tp, bool enable)
-+{
-+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-+
-+ if (enable) {
-+ r8153b_ups_flags(tp);
-+
-+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data |= UPS_FORCE_PWR_DOWN;
-+ ocp_data &= ~BIT(7);
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+ } else {
-+ ocp_data &= ~(UPS_EN | USP_PREWAKE);
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+ int i;
-+
-+ for (i = 0; i < 500; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+ AUTOLOAD_DONE)
-+ break;
-+ msleep(20);
-+ }
-+
-+ tp->rtl_ops.hw_phy_cfg(tp);
-+
-+ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+ tp->duplex, tp->advertising);
-+ }
-+
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
-+ ocp_data |= BIT(8);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
-+
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-+ }
-+}
-+
-+static void r8156_ups_en(struct r8152 *tp, bool enable)
-+{
-+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-+
-+ if (enable) {
-+ r8156_ups_flags(tp);
-+
-+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data |= UPS_FORCE_PWR_DOWN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+ switch (tp->version) {
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
-+ ocp_data &= ~OOBS_POLLING;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
-+ break;
-+ default:
-+ break;
-+ }
-+ } else {
-+ ocp_data &= ~(UPS_EN | USP_PREWAKE);
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data &= ~UPS_FORCE_PWR_DOWN;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
-+ tp->rtl_ops.hw_phy_cfg(tp);
-+
-+ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
-+ tp->duplex, tp->advertising);
-+ }
-+ }
-+}
-+
- static void r8153_power_cut_en(struct r8152 *tp, bool enable)
- {
- u32 ocp_data;
-@@ -3383,6 +3787,38 @@ static void rtl8153b_runtime_enable(stru
- }
- }
-
-+static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
-+{
-+ if (enable) {
-+ r8153_queue_wake(tp, true);
-+ r8153b_u1u2en(tp, false);
-+ r8153_u2p3en(tp, false);
-+ rtl_runtime_suspend_enable(tp, true);
-+ r8153c_ups_en(tp, true);
-+ } else {
-+ r8153c_ups_en(tp, false);
-+ r8153_queue_wake(tp, false);
-+ rtl_runtime_suspend_enable(tp, false);
-+ r8153b_u1u2en(tp, true);
-+ }
-+}
-+
-+static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
-+{
-+ if (enable) {
-+ r8153_queue_wake(tp, true);
-+ r8153b_u1u2en(tp, false);
-+ r8153_u2p3en(tp, false);
-+ rtl_runtime_suspend_enable(tp, true);
-+ } else {
-+ r8153_queue_wake(tp, false);
-+ rtl_runtime_suspend_enable(tp, false);
-+ r8153_u2p3en(tp, true);
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
-+ r8153b_u1u2en(tp, true);
-+ }
-+}
-+
- static void r8153_teredo_off(struct r8152 *tp)
- {
- u32 ocp_data;
-@@ -3403,14 +3839,19 @@ static void r8153_teredo_off(struct r815
-
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_TEST_01:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_14:
-+ case RTL_VER_15:
-+ default:
- /* The bit 0 ~ 7 are relative with teredo settings. They are
- * W1C (write 1 to clear), so set all 1 to disable it.
- */
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
- break;
--
-- default:
-- break;
- }
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
-@@ -3445,6 +3886,12 @@ static void rtl_clear_bp(struct r8152 *t
- break;
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_14:
-+ case RTL_VER_15:
- default:
- if (type == MCU_TYPE_USB) {
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-@@ -3654,6 +4101,11 @@ static bool rtl8152_is_fw_mac_ok(struct
- case RTL_VER_06:
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_14:
-+ case RTL_VER_15:
- fw_reg = 0xf800;
- bp_ba_addr = PLA_BP_BA;
- bp_en_addr = PLA_BP_EN;
-@@ -3677,6 +4129,11 @@ static bool rtl8152_is_fw_mac_ok(struct
- break;
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_14:
-+ case RTL_VER_15:
- fw_reg = 0xe600;
- bp_ba_addr = USB_BP_BA;
- bp_en_addr = USB_BP2_EN;
-@@ -4216,6 +4673,22 @@ static void r8153_eee_en(struct r8152 *t
- tp->ups_info.eee = enable;
- }
-
-+static void r8156_eee_en(struct r8152 *tp, bool enable)
-+{
-+ u16 config;
-+
-+ r8153_eee_en(tp, enable);
-+
-+ config = ocp_reg_read(tp, OCP_EEE_ADV2);
-+
-+ if (enable)
-+ config |= MDIO_EEE_2_5GT;
-+ else
-+ config &= ~MDIO_EEE_2_5GT;
-+
-+ ocp_reg_write(tp, OCP_EEE_ADV2, config);
-+}
-+
- static void rtl_eee_enable(struct r8152 *tp, bool enable)
- {
- switch (tp->version) {
-@@ -4237,6 +4710,7 @@ static void rtl_eee_enable(struct r8152
- case RTL_VER_06:
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_14:
- if (enable) {
- r8153_eee_en(tp, true);
- ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-@@ -4245,6 +4719,19 @@ static void rtl_eee_enable(struct r8152
- ocp_reg_write(tp, OCP_EEE_ADV, 0);
- }
- break;
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ if (enable) {
-+ r8156_eee_en(tp, true);
-+ ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
-+ } else {
-+ r8156_eee_en(tp, false);
-+ ocp_reg_write(tp, OCP_EEE_ADV, 0);
-+ }
-+ break;
- default:
- break;
- }
-@@ -4291,6 +4778,20 @@ static void wait_oob_link_list_ready(str
- }
- }
-
-+static void r8156b_wait_loading_flash(struct r8152 *tp)
-+{
-+ if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) &&
-+ !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) {
-+ int i;
-+
-+ for (i = 0; i < 100; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
-+ break;
-+ usleep_range(1000, 2000);
-+ }
-+ }
-+}
-+
- static void r8152b_exit_oob(struct r8152 *tp)
- {
- u32 ocp_data;
-@@ -4341,7 +4842,7 @@ static void r8152b_exit_oob(struct r8152
- }
-
- /* TX share fifo free credit full threshold */
-- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
-+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
-
- ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
-@@ -4518,6 +5019,21 @@ static int r8153b_post_firmware_1(struct
- return 0;
- }
-
-+static int r8153c_post_firmware_1(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
-+ ocp_data |= FLOW_CTRL_PATCH_2;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+ ocp_data |= FC_PATCH_TASK;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+ return 0;
-+}
-+
- static void r8153_aldps_en(struct r8152 *tp, bool enable)
- {
- u16 data;
-@@ -4720,6 +5236,13 @@ static void r8153b_hw_phy_cfg(struct r81
- set_bit(PHY_RESET, &tp->flags);
- }
-
-+static void r8153c_hw_phy_cfg(struct r8152 *tp)
-+{
-+ r8153b_hw_phy_cfg(tp);
-+
-+ tp->ups_info.r_tune = true;
-+}
-+
- static void rtl8153_change_mtu(struct r8152 *tp)
- {
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-@@ -4807,6 +5330,7 @@ static void r8153_enter_oob(struct r8152
-
- case RTL_VER_08:
- case RTL_VER_09:
-+ case RTL_VER_14:
- /* Clear teredo wake event. bit[15:8] is the teredo wakeup
- * type. Set it to zero. bits[7:0] are the W1C bits about
- * the events. Set them to all 1 to clear them.
-@@ -4843,6 +5367,96 @@ static void rtl8153_disable(struct r8152
- r8153_aldps_en(tp, true);
- }
-
-+static int rtl8156_enable(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 speed;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return -ENODEV;
-+
-+ set_tx_qlen(tp);
-+ rtl_set_eee_plus(tp);
-+ r8153_set_rx_early_timeout(tp);
-+ r8153_set_rx_early_size(tp);
-+
-+ speed = rtl8152_get_speed(tp);
-+ rtl_set_ifg(tp, speed);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ if (speed & _2500bps)
-+ ocp_data &= ~IDLE_SPDWN_EN;
-+ else
-+ ocp_data |= IDLE_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+ if (speed & _1000bps)
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
-+ else if (speed & _500bps)
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d);
-+
-+ if (tp->udev->speed == USB_SPEED_HIGH) {
-+ /* USB 0xb45e[3:0] l1_nyet_hird */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
-+ ocp_data &= ~0xf;
-+ if (is_flow_control(speed))
-+ ocp_data |= 0xf;
-+ else
-+ ocp_data |= 0x1;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
-+ }
-+
-+ return rtl_enable(tp);
-+}
-+
-+static int rtl8156b_enable(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 speed;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return -ENODEV;
-+
-+ set_tx_qlen(tp);
-+ rtl_set_eee_plus(tp);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
-+ ocp_data &= ~RX_AGGR_NUM_MASK;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
-+
-+ r8153_set_rx_early_timeout(tp);
-+ r8153_set_rx_early_size(tp);
-+
-+ speed = rtl8152_get_speed(tp);
-+ rtl_set_ifg(tp, speed);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ if (speed & _2500bps)
-+ ocp_data &= ~IDLE_SPDWN_EN;
-+ else
-+ ocp_data |= IDLE_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+ if (tp->udev->speed == USB_SPEED_HIGH) {
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
-+ ocp_data &= ~0xf;
-+ if (is_flow_control(speed))
-+ ocp_data |= 0xf;
-+ else
-+ ocp_data |= 0x1;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
-+ }
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+ ocp_data &= ~FC_PATCH_TASK;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+ usleep_range(1000, 2000);
-+ ocp_data |= FC_PATCH_TASK;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+ return rtl_enable(tp);
-+}
-+
- static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
- u32 advertising)
- {
-@@ -4891,58 +5505,73 @@ static int rtl8152_set_speed(struct r815
-
- tp->mii.force_media = 1;
- } else {
-- u16 anar, tmp1;
-+ u16 orig, new1;
- u32 support;
-
- support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
- RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
-
-- if (tp->mii.supports_gmii)
-+ if (tp->mii.supports_gmii) {
- support |= RTL_ADVERTISED_1000_FULL;
-
-+ if (tp->support_2500full)
-+ support |= RTL_ADVERTISED_2500_FULL;
-+ }
-+
- if (!(advertising & support))
- return -EINVAL;
-
-- anar = r8152_mdio_read(tp, MII_ADVERTISE);
-- tmp1 = anar & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ orig = r8152_mdio_read(tp, MII_ADVERTISE);
-+ new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
- ADVERTISE_100HALF | ADVERTISE_100FULL);
- if (advertising & RTL_ADVERTISED_10_HALF) {
-- tmp1 |= ADVERTISE_10HALF;
-+ new1 |= ADVERTISE_10HALF;
- tp->ups_info.speed_duplex = NWAY_10M_HALF;
- }
- if (advertising & RTL_ADVERTISED_10_FULL) {
-- tmp1 |= ADVERTISE_10FULL;
-+ new1 |= ADVERTISE_10FULL;
- tp->ups_info.speed_duplex = NWAY_10M_FULL;
- }
-
- if (advertising & RTL_ADVERTISED_100_HALF) {
-- tmp1 |= ADVERTISE_100HALF;
-+ new1 |= ADVERTISE_100HALF;
- tp->ups_info.speed_duplex = NWAY_100M_HALF;
- }
- if (advertising & RTL_ADVERTISED_100_FULL) {
-- tmp1 |= ADVERTISE_100FULL;
-+ new1 |= ADVERTISE_100FULL;
- tp->ups_info.speed_duplex = NWAY_100M_FULL;
- }
-
-- if (anar != tmp1) {
-- r8152_mdio_write(tp, MII_ADVERTISE, tmp1);
-- tp->mii.advertising = tmp1;
-+ if (orig != new1) {
-+ r8152_mdio_write(tp, MII_ADVERTISE, new1);
-+ tp->mii.advertising = new1;
- }
-
- if (tp->mii.supports_gmii) {
-- u16 gbcr;
--
-- gbcr = r8152_mdio_read(tp, MII_CTRL1000);
-- tmp1 = gbcr & ~(ADVERTISE_1000FULL |
-+ orig = r8152_mdio_read(tp, MII_CTRL1000);
-+ new1 = orig & ~(ADVERTISE_1000FULL |
- ADVERTISE_1000HALF);
-
- if (advertising & RTL_ADVERTISED_1000_FULL) {
-- tmp1 |= ADVERTISE_1000FULL;
-+ new1 |= ADVERTISE_1000FULL;
- tp->ups_info.speed_duplex = NWAY_1000M_FULL;
- }
-
-- if (gbcr != tmp1)
-- r8152_mdio_write(tp, MII_CTRL1000, tmp1);
-+ if (orig != new1)
-+ r8152_mdio_write(tp, MII_CTRL1000, new1);
-+ }
-+
-+ if (tp->support_2500full) {
-+ orig = ocp_reg_read(tp, OCP_10GBT_CTRL);
-+ new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G;
-+
-+ if (advertising & RTL_ADVERTISED_2500_FULL) {
-+ new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G;
-+ tp->ups_info.speed_duplex = NWAY_2500M_FULL;
-+ }
-+
-+ if (orig != new1)
-+ ocp_reg_write(tp, OCP_10GBT_CTRL, new1);
- }
-
- bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
-@@ -5098,6 +5727,253 @@ static void rtl8153b_down(struct r8152 *
- r8153_aldps_en(tp, true);
- }
-
-+static void rtl8153c_change_mtu(struct r8152 *tp)
-+{
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64);
-+
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
-+
-+ /* Adjust the tx fifo free credit full threshold, otherwise
-+ * the fifo would be too small to send a jumbo frame packet.
-+ */
-+ if (tp->netdev->mtu < 8000)
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8);
-+ else
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8);
-+}
-+
-+static void rtl8153c_up(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+
-+ r8153b_u1u2en(tp, false);
-+ r8153_u2p3en(tp, false);
-+ r8153_aldps_en(tp, false);
-+
-+ rxdy_gated_en(tp, true);
-+ r8153_teredo_off(tp);
-+
-+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+ ocp_data &= ~RCR_ACPT_ALL;
-+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+ rtl8152_nic_reset(tp);
-+ rtl_reset_bmu(tp);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+ ocp_data &= ~NOW_IS_OOB;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+ ocp_data &= ~MCU_BORW_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+ wait_oob_link_list_ready(tp);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+ ocp_data |= RE_INIT_LL;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+ wait_oob_link_list_ready(tp);
-+
-+ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
-+
-+ rtl8153c_change_mtu(tp);
-+
-+ rtl8152_nic_reset(tp);
-+
-+ /* rx share fifo credit full threshold */
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02);
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
-+
-+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
-+
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
-+ ocp_data |= BIT(8);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
-+
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+ ocp_data &= ~PLA_MCU_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+ r8153_aldps_en(tp, true);
-+ r8153b_u1u2en(tp, true);
-+}
-+
-+static inline u32 fc_pause_on_auto(struct r8152 *tp)
-+{
-+ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
-+}
-+
-+static inline u32 fc_pause_off_auto(struct r8152 *tp)
-+{
-+ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024);
-+}
-+
-+static void r8156_fc_parameter(struct r8152 *tp)
-+{
-+ u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp);
-+ u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp);
-+
-+ switch (tp->version) {
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 8);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 8);
-+ break;
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16);
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void rtl8156_change_mtu(struct r8152 *tp)
-+{
-+ u32 rx_max_size = mtu_to_size(tp->netdev->mtu);
-+
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size);
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
-+ r8156_fc_parameter(tp);
-+
-+ /* TX share fifo free credit full threshold */
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
-+ ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16);
-+}
-+
-+static void rtl8156_up(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+
-+ r8153b_u1u2en(tp, false);
-+ r8153_u2p3en(tp, false);
-+ r8153_aldps_en(tp, false);
-+
-+ rxdy_gated_en(tp, true);
-+ r8153_teredo_off(tp);
-+
-+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+ ocp_data &= ~RCR_ACPT_ALL;
-+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+ rtl8152_nic_reset(tp);
-+ rtl_reset_bmu(tp);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+ ocp_data &= ~NOW_IS_OOB;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
-+ ocp_data &= ~MCU_BORW_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
-+
-+ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
-+
-+ rtl8156_change_mtu(tp);
-+
-+ switch (tp->version) {
-+ case RTL_TEST_01:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
-+ ocp_data |= ACT_ODMA;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* share FIFO settings */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
-+ ocp_data &= ~RXFIFO_FULL_MASK;
-+ ocp_data |= 0x08;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+ ocp_data &= ~PLA_MCU_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
-+ ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
-+
-+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
-+
-+ if (tp->saved_wolopts != __rtl_get_wol(tp)) {
-+ netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n");
-+ __rtl_set_wol(tp, tp->saved_wolopts);
-+ }
-+
-+ r8153_aldps_en(tp, true);
-+ r8153_u2p3en(tp, true);
-+
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
-+ r8153b_u1u2en(tp, true);
-+}
-+
-+static void rtl8156_down(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
-+ rtl_drop_queued_tx(tp);
-+ return;
-+ }
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+ ocp_data |= PLA_MCU_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+ r8153b_u1u2en(tp, false);
-+ r8153_u2p3en(tp, false);
-+ r8153b_power_cut_en(tp, false);
-+ r8153_aldps_en(tp, false);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+ ocp_data &= ~NOW_IS_OOB;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+ rtl_disable(tp);
-+ rtl_reset_bmu(tp);
-+
-+ /* Clear teredo wake event. bit[15:8] is the teredo wakeup
-+ * type. Set it to zero. bits[7:0] are the W1C bits about
-+ * the events. Set them to all 1 to clear them.
-+ */
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
-+ ocp_data |= NOW_IS_OOB;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
-+
-+ rtl_rx_vlan_en(tp, true);
-+ rxdy_gated_en(tp, false);
-+
-+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
-+ ocp_data |= RCR_APM | RCR_AM | RCR_AB;
-+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+ r8153_aldps_en(tp, true);
-+}
-+
- static bool rtl8152_in_nway(struct r8152 *tp)
- {
- u16 nway_state;
-@@ -5128,7 +6004,7 @@ static void set_carrier(struct r8152 *tp
- {
- struct net_device *netdev = tp->netdev;
- struct napi_struct *napi = &tp->napi;
-- u8 speed;
-+ u16 speed;
-
- speed = rtl8152_get_speed(tp);
-
-@@ -5141,7 +6017,7 @@ static void set_carrier(struct r8152 *tp
- rtl_start_rx(tp);
- clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
- _rtl8152_set_rx_mode(netdev);
-- napi_enable(&tp->napi);
-+ napi_enable(napi);
- netif_wake_queue(netdev);
- netif_info(tp, link, netdev, "carrier on\n");
- } else if (netif_queue_stopped(netdev) &&
-@@ -5521,14 +6397,9 @@ static void r8153_init(struct r8152 *tp)
-
- ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
-
-- /* MAC clock speed down */
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
--
- r8153_power_cut_en(tp, false);
- rtl_runtime_suspend_enable(tp, false);
-+ r8153_mac_clk_speed_down(tp, false);
- r8153_u1u2en(tp, true);
- usb_enable_lpm(tp->udev);
-
-@@ -5621,9 +6492,7 @@ static void r8153b_init(struct r8152 *tp
- usb_enable_lpm(tp->udev);
-
- /* MAC clock speed down */
-- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-- ocp_data |= MAC_CLK_SPDWN_EN;
-- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
-+ r8153_mac_clk_speed_down(tp, true);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
-@@ -5652,6 +6521,1069 @@ static void r8153b_init(struct r8152 *tp
- r8152_led_configuration(tp);
- }
-
-+static void r8153c_init(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 data;
-+ int i;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+
-+ r8153b_u1u2en(tp, false);
-+
-+ /* Disable spi_en */
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
-+ ocp_data &= ~BIT(3);
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
-+ ocp_data |= BIT(1);
-+ ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
-+
-+ for (i = 0; i < 500; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+ AUTOLOAD_DONE)
-+ break;
-+
-+ msleep(20);
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+ }
-+
-+ data = r8153_phy_status(tp, 0);
-+
-+ data = r8152_mdio_read(tp, MII_BMCR);
-+ if (data & BMCR_PDOWN) {
-+ data &= ~BMCR_PDOWN;
-+ r8152_mdio_write(tp, MII_BMCR, data);
-+ }
-+
-+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+
-+ r8153_u2p3en(tp, false);
-+
-+ /* MSC timer = 0xfff * 8ms = 32760 ms */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+ r8153b_power_cut_en(tp, false);
-+ r8153c_ups_en(tp, false);
-+ r8153_queue_wake(tp, false);
-+ rtl_runtime_suspend_enable(tp, false);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+ if (rtl8152_get_speed(tp) & LINK_STATUS)
-+ ocp_data |= CUR_LINK_OK;
-+ else
-+ ocp_data &= ~CUR_LINK_OK;
-+
-+ ocp_data |= POLL_LINK_CHG;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+ r8153b_u1u2en(tp, true);
-+
-+ usb_enable_lpm(tp->udev);
-+
-+ /* MAC clock speed down */
-+ r8153_mac_clk_speed_down(tp, true);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
-+ ocp_data &= ~BIT(7);
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
-+
-+ set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+ /* rx aggregation */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+ rtl_tally_reset(tp);
-+
-+ tp->coalesce = 15000; /* 15 us */
-+}
-+
-+static void r8156_hw_phy_cfg(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 data;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+ if (ocp_data & PCUT_STATUS) {
-+ ocp_data &= ~PCUT_STATUS;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+ }
-+
-+ data = r8153_phy_status(tp, 0);
-+ switch (data) {
-+ case PHY_STAT_EXT_INIT:
-+ rtl8152_apply_firmware(tp, true);
-+
-+ data = ocp_reg_read(tp, 0xa468);
-+ data &= ~(BIT(3) | BIT(1));
-+ ocp_reg_write(tp, 0xa468, data);
-+ break;
-+ case PHY_STAT_LAN_ON:
-+ case PHY_STAT_PWRDN:
-+ default:
-+ rtl8152_apply_firmware(tp, false);
-+ break;
-+ }
-+
-+ /* disable ALDPS before updating the PHY parameters */
-+ r8153_aldps_en(tp, false);
-+
-+ /* disable EEE before updating the PHY parameters */
-+ rtl_eee_enable(tp, false);
-+
-+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
-+ ocp_data |= PFM_PWM_SWITCH;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-+
-+ switch (tp->version) {
-+ case RTL_VER_10:
-+ data = ocp_reg_read(tp, 0xad40);
-+ data &= ~0x3ff;
-+ data |= BIT(7) | BIT(2);
-+ ocp_reg_write(tp, 0xad40, data);
-+
-+ data = ocp_reg_read(tp, 0xad4e);
-+ data |= BIT(4);
-+ ocp_reg_write(tp, 0xad4e, data);
-+ data = ocp_reg_read(tp, 0xad16);
-+ data &= ~0x3ff;
-+ data |= 0x6;
-+ ocp_reg_write(tp, 0xad16, data);
-+ data = ocp_reg_read(tp, 0xad32);
-+ data &= ~0x3f;
-+ data |= 6;
-+ ocp_reg_write(tp, 0xad32, data);
-+ data = ocp_reg_read(tp, 0xac08);
-+ data &= ~(BIT(12) | BIT(8));
-+ ocp_reg_write(tp, 0xac08, data);
-+ data = ocp_reg_read(tp, 0xac8a);
-+ data |= BIT(12) | BIT(13) | BIT(14);
-+ data &= ~BIT(15);
-+ ocp_reg_write(tp, 0xac8a, data);
-+ data = ocp_reg_read(tp, 0xad18);
-+ data |= BIT(10);
-+ ocp_reg_write(tp, 0xad18, data);
-+ data = ocp_reg_read(tp, 0xad1a);
-+ data |= 0x3ff;
-+ ocp_reg_write(tp, 0xad1a, data);
-+ data = ocp_reg_read(tp, 0xad1c);
-+ data |= 0x3ff;
-+ ocp_reg_write(tp, 0xad1c, data);
-+
-+ data = sram_read(tp, 0x80ea);
-+ data &= ~0xff00;
-+ data |= 0xc400;
-+ sram_write(tp, 0x80ea, data);
-+ data = sram_read(tp, 0x80eb);
-+ data &= ~0x0700;
-+ data |= 0x0300;
-+ sram_write(tp, 0x80eb, data);
-+ data = sram_read(tp, 0x80f8);
-+ data &= ~0xff00;
-+ data |= 0x1c00;
-+ sram_write(tp, 0x80f8, data);
-+ data = sram_read(tp, 0x80f1);
-+ data &= ~0xff00;
-+ data |= 0x3000;
-+ sram_write(tp, 0x80f1, data);
-+
-+ data = sram_read(tp, 0x80fe);
-+ data &= ~0xff00;
-+ data |= 0xa500;
-+ sram_write(tp, 0x80fe, data);
-+ data = sram_read(tp, 0x8102);
-+ data &= ~0xff00;
-+ data |= 0x5000;
-+ sram_write(tp, 0x8102, data);
-+ data = sram_read(tp, 0x8015);
-+ data &= ~0xff00;
-+ data |= 0x3300;
-+ sram_write(tp, 0x8015, data);
-+ data = sram_read(tp, 0x8100);
-+ data &= ~0xff00;
-+ data |= 0x7000;
-+ sram_write(tp, 0x8100, data);
-+ data = sram_read(tp, 0x8014);
-+ data &= ~0xff00;
-+ data |= 0xf000;
-+ sram_write(tp, 0x8014, data);
-+ data = sram_read(tp, 0x8016);
-+ data &= ~0xff00;
-+ data |= 0x6500;
-+ sram_write(tp, 0x8016, data);
-+ data = sram_read(tp, 0x80dc);
-+ data &= ~0xff00;
-+ data |= 0xed00;
-+ sram_write(tp, 0x80dc, data);
-+ data = sram_read(tp, 0x80df);
-+ data |= BIT(8);
-+ sram_write(tp, 0x80df, data);
-+ data = sram_read(tp, 0x80e1);
-+ data &= ~BIT(8);
-+ sram_write(tp, 0x80e1, data);
-+
-+ data = ocp_reg_read(tp, 0xbf06);
-+ data &= ~0x003f;
-+ data |= 0x0038;
-+ ocp_reg_write(tp, 0xbf06, data);
-+
-+ sram_write(tp, 0x819f, 0xddb6);
-+
-+ ocp_reg_write(tp, 0xbc34, 0x5555);
-+ data = ocp_reg_read(tp, 0xbf0a);
-+ data &= ~0x0e00;
-+ data |= 0x0a00;
-+ ocp_reg_write(tp, 0xbf0a, data);
-+
-+ data = ocp_reg_read(tp, 0xbd2c);
-+ data &= ~BIT(13);
-+ ocp_reg_write(tp, 0xbd2c, data);
-+ break;
-+ case RTL_VER_11:
-+ data = ocp_reg_read(tp, 0xad16);
-+ data |= 0x3ff;
-+ ocp_reg_write(tp, 0xad16, data);
-+ data = ocp_reg_read(tp, 0xad32);
-+ data &= ~0x3f;
-+ data |= 6;
-+ ocp_reg_write(tp, 0xad32, data);
-+ data = ocp_reg_read(tp, 0xac08);
-+ data &= ~(BIT(12) | BIT(8));
-+ ocp_reg_write(tp, 0xac08, data);
-+ data = ocp_reg_read(tp, 0xacc0);
-+ data &= ~0x3;
-+ data |= BIT(1);
-+ ocp_reg_write(tp, 0xacc0, data);
-+ data = ocp_reg_read(tp, 0xad40);
-+ data &= ~0xe7;
-+ data |= BIT(6) | BIT(2);
-+ ocp_reg_write(tp, 0xad40, data);
-+ data = ocp_reg_read(tp, 0xac14);
-+ data &= ~BIT(7);
-+ ocp_reg_write(tp, 0xac14, data);
-+ data = ocp_reg_read(tp, 0xac80);
-+ data &= ~(BIT(8) | BIT(9));
-+ ocp_reg_write(tp, 0xac80, data);
-+ data = ocp_reg_read(tp, 0xac5e);
-+ data &= ~0x7;
-+ data |= BIT(1);
-+ ocp_reg_write(tp, 0xac5e, data);
-+ ocp_reg_write(tp, 0xad4c, 0x00a8);
-+ ocp_reg_write(tp, 0xac5c, 0x01ff);
-+ data = ocp_reg_read(tp, 0xac8a);
-+ data &= ~0xf0;
-+ data |= BIT(4) | BIT(5);
-+ ocp_reg_write(tp, 0xac8a, data);
-+ ocp_reg_write(tp, 0xb87c, 0x8157);
-+ data = ocp_reg_read(tp, 0xb87e);
-+ data &= ~0xff00;
-+ data |= 0x0500;
-+ ocp_reg_write(tp, 0xb87e, data);
-+ ocp_reg_write(tp, 0xb87c, 0x8159);
-+ data = ocp_reg_read(tp, 0xb87e);
-+ data &= ~0xff00;
-+ data |= 0x0700;
-+ ocp_reg_write(tp, 0xb87e, data);
-+
-+ /* AAGC */
-+ ocp_reg_write(tp, 0xb87c, 0x80a2);
-+ ocp_reg_write(tp, 0xb87e, 0x0153);
-+ ocp_reg_write(tp, 0xb87c, 0x809c);
-+ ocp_reg_write(tp, 0xb87e, 0x0153);
-+
-+ /* EEE parameter */
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
-+ ocp_data |= EN_XG_LIP | EN_G_LIP;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
-+
-+ sram_write(tp, 0x8257, 0x020f); /* XG PLL */
-+ sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
-+
-+ if (rtl_phy_patch_request(tp, true, true))
-+ return;
-+
-+ /* Advance EEE */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ ocp_data |= EEE_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
-+ data &= ~(EN_EEE_100 | EN_EEE_1000);
-+ data |= EN_10M_CLKDIV;
-+ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
-+ tp->ups_info._10m_ckdiv = true;
-+ tp->ups_info.eee_plloff_100 = false;
-+ tp->ups_info.eee_plloff_giga = false;
-+
-+ data = ocp_reg_read(tp, OCP_POWER_CFG);
-+ data &= ~EEE_CLKDIV_EN;
-+ ocp_reg_write(tp, OCP_POWER_CFG, data);
-+ tp->ups_info.eee_ckdiv = false;
-+
-+ ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
-+ ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5));
-+ tp->ups_info._250m_ckdiv = false;
-+
-+ rtl_phy_patch_request(tp, false, true);
-+
-+ /* enable ADC Ibias Cal */
-+ data = ocp_reg_read(tp, 0xd068);
-+ data |= BIT(13);
-+ ocp_reg_write(tp, 0xd068, data);
-+
-+ /* enable Thermal Sensor */
-+ data = sram_read(tp, 0x81a2);
-+ data &= ~BIT(8);
-+ sram_write(tp, 0x81a2, data);
-+ data = ocp_reg_read(tp, 0xb54c);
-+ data &= ~0xff00;
-+ data |= 0xdb00;
-+ ocp_reg_write(tp, 0xb54c, data);
-+
-+ /* Nway 2.5G Lite */
-+ data = ocp_reg_read(tp, 0xa454);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa454, data);
-+
-+ /* CS DSP solution */
-+ data = ocp_reg_read(tp, OCP_10GBT_CTRL);
-+ data |= RTL_ADV2_5G_F_R;
-+ ocp_reg_write(tp, OCP_10GBT_CTRL, data);
-+ data = ocp_reg_read(tp, 0xad4e);
-+ data &= ~BIT(4);
-+ ocp_reg_write(tp, 0xad4e, data);
-+ data = ocp_reg_read(tp, 0xa86a);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa86a, data);
-+
-+ /* MDI SWAP */
-+ if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) &&
-+ (ocp_reg_read(tp, 0xd068) & BIT(1))) {
-+ u16 swap_a, swap_b;
-+
-+ data = ocp_reg_read(tp, 0xd068);
-+ data &= ~0x1f;
-+ data |= 0x1; /* p0 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ swap_a = ocp_reg_read(tp, 0xd06a);
-+ data &= ~0x18;
-+ data |= 0x18; /* p3 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ swap_b = ocp_reg_read(tp, 0xd06a);
-+ data &= ~0x18; /* p0 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ ocp_reg_write(tp, 0xd06a,
-+ (swap_a & ~0x7ff) | (swap_b & 0x7ff));
-+ data |= 0x18; /* p3 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ ocp_reg_write(tp, 0xd06a,
-+ (swap_b & ~0x7ff) | (swap_a & 0x7ff));
-+ data &= ~0x18;
-+ data |= 0x08; /* p1 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ swap_a = ocp_reg_read(tp, 0xd06a);
-+ data &= ~0x18;
-+ data |= 0x10; /* p2 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ swap_b = ocp_reg_read(tp, 0xd06a);
-+ data &= ~0x18;
-+ data |= 0x08; /* p1 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ ocp_reg_write(tp, 0xd06a,
-+ (swap_a & ~0x7ff) | (swap_b & 0x7ff));
-+ data &= ~0x18;
-+ data |= 0x10; /* p2 */
-+ ocp_reg_write(tp, 0xd068, data);
-+ ocp_reg_write(tp, 0xd06a,
-+ (swap_b & ~0x7ff) | (swap_a & 0x7ff));
-+ swap_a = ocp_reg_read(tp, 0xbd5a);
-+ swap_b = ocp_reg_read(tp, 0xbd5c);
-+ ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) |
-+ ((swap_b & 0x1f) << 8) |
-+ ((swap_b >> 8) & 0x1f));
-+ ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) |
-+ ((swap_a & 0x1f) << 8) |
-+ ((swap_a >> 8) & 0x1f));
-+ swap_a = ocp_reg_read(tp, 0xbc18);
-+ swap_b = ocp_reg_read(tp, 0xbc1a);
-+ ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) |
-+ ((swap_b & 0x1f) << 8) |
-+ ((swap_b >> 8) & 0x1f));
-+ ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) |
-+ ((swap_a & 0x1f) << 8) |
-+ ((swap_a >> 8) & 0x1f));
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-+
-+ data = ocp_reg_read(tp, 0xa428);
-+ data &= ~BIT(9);
-+ ocp_reg_write(tp, 0xa428, data);
-+ data = ocp_reg_read(tp, 0xa5ea);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa5ea, data);
-+ tp->ups_info.lite_mode = 0;
-+
-+ if (tp->eee_en)
-+ rtl_eee_enable(tp, true);
-+
-+ r8153_aldps_en(tp, true);
-+ r8152b_enable_fc(tp);
-+ r8153_u2p3en(tp, true);
-+
-+ set_bit(PHY_RESET, &tp->flags);
-+}
-+
-+static void r8156b_hw_phy_cfg(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 data;
-+
-+ switch (tp->version) {
-+ case RTL_VER_12:
-+ ocp_reg_write(tp, 0xbf86, 0x9000);
-+ data = ocp_reg_read(tp, 0xc402);
-+ data |= BIT(10);
-+ ocp_reg_write(tp, 0xc402, data);
-+ data &= ~BIT(10);
-+ ocp_reg_write(tp, 0xc402, data);
-+ ocp_reg_write(tp, 0xbd86, 0x1010);
-+ ocp_reg_write(tp, 0xbd88, 0x1010);
-+ data = ocp_reg_read(tp, 0xbd4e);
-+ data &= ~(BIT(10) | BIT(11));
-+ data |= BIT(11);
-+ ocp_reg_write(tp, 0xbd4e, data);
-+ data = ocp_reg_read(tp, 0xbf46);
-+ data &= ~0xf00;
-+ data |= 0x700;
-+ ocp_reg_write(tp, 0xbf46, data);
-+ break;
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ r8156b_wait_loading_flash(tp);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-+ if (ocp_data & PCUT_STATUS) {
-+ ocp_data &= ~PCUT_STATUS;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
-+ }
-+
-+ data = r8153_phy_status(tp, 0);
-+ switch (data) {
-+ case PHY_STAT_EXT_INIT:
-+ rtl8152_apply_firmware(tp, true);
-+
-+ data = ocp_reg_read(tp, 0xa466);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa466, data);
-+
-+ data = ocp_reg_read(tp, 0xa468);
-+ data &= ~(BIT(3) | BIT(1));
-+ ocp_reg_write(tp, 0xa468, data);
-+ break;
-+ case PHY_STAT_LAN_ON:
-+ case PHY_STAT_PWRDN:
-+ default:
-+ rtl8152_apply_firmware(tp, false);
-+ break;
-+ }
-+
-+ data = r8152_mdio_read(tp, MII_BMCR);
-+ if (data & BMCR_PDOWN) {
-+ data &= ~BMCR_PDOWN;
-+ r8152_mdio_write(tp, MII_BMCR, data);
-+ }
-+
-+ /* disable ALDPS before updating the PHY parameters */
-+ r8153_aldps_en(tp, false);
-+
-+ /* disable EEE before updating the PHY parameters */
-+ rtl_eee_enable(tp, false);
-+
-+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
-+ ocp_data |= PFM_PWM_SWITCH;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
-+
-+ switch (tp->version) {
-+ case RTL_VER_12:
-+ data = ocp_reg_read(tp, 0xbc08);
-+ data |= BIT(3) | BIT(2);
-+ ocp_reg_write(tp, 0xbc08, data);
-+
-+ data = sram_read(tp, 0x8fff);
-+ data &= ~0xff00;
-+ data |= 0x0400;
-+ sram_write(tp, 0x8fff, data);
-+
-+ data = ocp_reg_read(tp, 0xacda);
-+ data |= 0xff00;
-+ ocp_reg_write(tp, 0xacda, data);
-+ data = ocp_reg_read(tp, 0xacde);
-+ data |= 0xf000;
-+ ocp_reg_write(tp, 0xacde, data);
-+ ocp_reg_write(tp, 0xac8c, 0x0ffc);
-+ ocp_reg_write(tp, 0xac46, 0xb7b4);
-+ ocp_reg_write(tp, 0xac50, 0x0fbc);
-+ ocp_reg_write(tp, 0xac3c, 0x9240);
-+ ocp_reg_write(tp, 0xac4e, 0x0db4);
-+ ocp_reg_write(tp, 0xacc6, 0x0707);
-+ ocp_reg_write(tp, 0xacc8, 0xa0d3);
-+ ocp_reg_write(tp, 0xad08, 0x0007);
-+
-+ ocp_reg_write(tp, 0xb87c, 0x8560);
-+ ocp_reg_write(tp, 0xb87e, 0x19cc);
-+ ocp_reg_write(tp, 0xb87c, 0x8562);
-+ ocp_reg_write(tp, 0xb87e, 0x19cc);
-+ ocp_reg_write(tp, 0xb87c, 0x8564);
-+ ocp_reg_write(tp, 0xb87e, 0x19cc);
-+ ocp_reg_write(tp, 0xb87c, 0x8566);
-+ ocp_reg_write(tp, 0xb87e, 0x147d);
-+ ocp_reg_write(tp, 0xb87c, 0x8568);
-+ ocp_reg_write(tp, 0xb87e, 0x147d);
-+ ocp_reg_write(tp, 0xb87c, 0x856a);
-+ ocp_reg_write(tp, 0xb87e, 0x147d);
-+ ocp_reg_write(tp, 0xb87c, 0x8ffe);
-+ ocp_reg_write(tp, 0xb87e, 0x0907);
-+ ocp_reg_write(tp, 0xb87c, 0x80d6);
-+ ocp_reg_write(tp, 0xb87e, 0x2801);
-+ ocp_reg_write(tp, 0xb87c, 0x80f2);
-+ ocp_reg_write(tp, 0xb87e, 0x2801);
-+ ocp_reg_write(tp, 0xb87c, 0x80f4);
-+ ocp_reg_write(tp, 0xb87e, 0x6077);
-+ ocp_reg_write(tp, 0xb506, 0x01e7);
-+
-+ ocp_reg_write(tp, 0xb87c, 0x8013);
-+ ocp_reg_write(tp, 0xb87e, 0x0700);
-+ ocp_reg_write(tp, 0xb87c, 0x8fb9);
-+ ocp_reg_write(tp, 0xb87e, 0x2801);
-+ ocp_reg_write(tp, 0xb87c, 0x8fba);
-+ ocp_reg_write(tp, 0xb87e, 0x0100);
-+ ocp_reg_write(tp, 0xb87c, 0x8fbc);
-+ ocp_reg_write(tp, 0xb87e, 0x1900);
-+ ocp_reg_write(tp, 0xb87c, 0x8fbe);
-+ ocp_reg_write(tp, 0xb87e, 0xe100);
-+ ocp_reg_write(tp, 0xb87c, 0x8fc0);
-+ ocp_reg_write(tp, 0xb87e, 0x0800);
-+ ocp_reg_write(tp, 0xb87c, 0x8fc2);
-+ ocp_reg_write(tp, 0xb87e, 0xe500);
-+ ocp_reg_write(tp, 0xb87c, 0x8fc4);
-+ ocp_reg_write(tp, 0xb87e, 0x0f00);
-+ ocp_reg_write(tp, 0xb87c, 0x8fc6);
-+ ocp_reg_write(tp, 0xb87e, 0xf100);
-+ ocp_reg_write(tp, 0xb87c, 0x8fc8);
-+ ocp_reg_write(tp, 0xb87e, 0x0400);
-+ ocp_reg_write(tp, 0xb87c, 0x8fca);
-+ ocp_reg_write(tp, 0xb87e, 0xf300);
-+ ocp_reg_write(tp, 0xb87c, 0x8fcc);
-+ ocp_reg_write(tp, 0xb87e, 0xfd00);
-+ ocp_reg_write(tp, 0xb87c, 0x8fce);
-+ ocp_reg_write(tp, 0xb87e, 0xff00);
-+ ocp_reg_write(tp, 0xb87c, 0x8fd0);
-+ ocp_reg_write(tp, 0xb87e, 0xfb00);
-+ ocp_reg_write(tp, 0xb87c, 0x8fd2);
-+ ocp_reg_write(tp, 0xb87e, 0x0100);
-+ ocp_reg_write(tp, 0xb87c, 0x8fd4);
-+ ocp_reg_write(tp, 0xb87e, 0xf400);
-+ ocp_reg_write(tp, 0xb87c, 0x8fd6);
-+ ocp_reg_write(tp, 0xb87e, 0xff00);
-+ ocp_reg_write(tp, 0xb87c, 0x8fd8);
-+ ocp_reg_write(tp, 0xb87e, 0xf600);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
-+ ocp_data |= EN_XG_LIP | EN_G_LIP;
-+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
-+ ocp_reg_write(tp, 0xb87c, 0x813d);
-+ ocp_reg_write(tp, 0xb87e, 0x390e);
-+ ocp_reg_write(tp, 0xb87c, 0x814f);
-+ ocp_reg_write(tp, 0xb87e, 0x790e);
-+ ocp_reg_write(tp, 0xb87c, 0x80b0);
-+ ocp_reg_write(tp, 0xb87e, 0x0f31);
-+ data = ocp_reg_read(tp, 0xbf4c);
-+ data |= BIT(1);
-+ ocp_reg_write(tp, 0xbf4c, data);
-+ data = ocp_reg_read(tp, 0xbcca);
-+ data |= BIT(9) | BIT(8);
-+ ocp_reg_write(tp, 0xbcca, data);
-+ ocp_reg_write(tp, 0xb87c, 0x8141);
-+ ocp_reg_write(tp, 0xb87e, 0x320e);
-+ ocp_reg_write(tp, 0xb87c, 0x8153);
-+ ocp_reg_write(tp, 0xb87e, 0x720e);
-+ ocp_reg_write(tp, 0xb87c, 0x8529);
-+ ocp_reg_write(tp, 0xb87e, 0x050e);
-+ data = ocp_reg_read(tp, OCP_EEE_CFG);
-+ data &= ~CTAP_SHORT_EN;
-+ ocp_reg_write(tp, OCP_EEE_CFG, data);
-+
-+ sram_write(tp, 0x816c, 0xc4a0);
-+ sram_write(tp, 0x8170, 0xc4a0);
-+ sram_write(tp, 0x8174, 0x04a0);
-+ sram_write(tp, 0x8178, 0x04a0);
-+ sram_write(tp, 0x817c, 0x0719);
-+ sram_write(tp, 0x8ff4, 0x0400);
-+ sram_write(tp, 0x8ff1, 0x0404);
-+
-+ ocp_reg_write(tp, 0xbf4a, 0x001b);
-+ ocp_reg_write(tp, 0xb87c, 0x8033);
-+ ocp_reg_write(tp, 0xb87e, 0x7c13);
-+ ocp_reg_write(tp, 0xb87c, 0x8037);
-+ ocp_reg_write(tp, 0xb87e, 0x7c13);
-+ ocp_reg_write(tp, 0xb87c, 0x803b);
-+ ocp_reg_write(tp, 0xb87e, 0xfc32);
-+ ocp_reg_write(tp, 0xb87c, 0x803f);
-+ ocp_reg_write(tp, 0xb87e, 0x7c13);
-+ ocp_reg_write(tp, 0xb87c, 0x8043);
-+ ocp_reg_write(tp, 0xb87e, 0x7c13);
-+ ocp_reg_write(tp, 0xb87c, 0x8047);
-+ ocp_reg_write(tp, 0xb87e, 0x7c13);
-+
-+ ocp_reg_write(tp, 0xb87c, 0x8145);
-+ ocp_reg_write(tp, 0xb87e, 0x370e);
-+ ocp_reg_write(tp, 0xb87c, 0x8157);
-+ ocp_reg_write(tp, 0xb87e, 0x770e);
-+ ocp_reg_write(tp, 0xb87c, 0x8169);
-+ ocp_reg_write(tp, 0xb87e, 0x0d0a);
-+ ocp_reg_write(tp, 0xb87c, 0x817b);
-+ ocp_reg_write(tp, 0xb87e, 0x1d0a);
-+
-+ data = sram_read(tp, 0x8217);
-+ data &= ~0xff00;
-+ data |= 0x5000;
-+ sram_write(tp, 0x8217, data);
-+ data = sram_read(tp, 0x821a);
-+ data &= ~0xff00;
-+ data |= 0x5000;
-+ sram_write(tp, 0x821a, data);
-+ sram_write(tp, 0x80da, 0x0403);
-+ data = sram_read(tp, 0x80dc);
-+ data &= ~0xff00;
-+ data |= 0x1000;
-+ sram_write(tp, 0x80dc, data);
-+ sram_write(tp, 0x80b3, 0x0384);
-+ sram_write(tp, 0x80b7, 0x2007);
-+ data = sram_read(tp, 0x80ba);
-+ data &= ~0xff00;
-+ data |= 0x6c00;
-+ sram_write(tp, 0x80ba, data);
-+ sram_write(tp, 0x80b5, 0xf009);
-+ data = sram_read(tp, 0x80bd);
-+ data &= ~0xff00;
-+ data |= 0x9f00;
-+ sram_write(tp, 0x80bd, data);
-+ sram_write(tp, 0x80c7, 0xf083);
-+ sram_write(tp, 0x80dd, 0x03f0);
-+ data = sram_read(tp, 0x80df);
-+ data &= ~0xff00;
-+ data |= 0x1000;
-+ sram_write(tp, 0x80df, data);
-+ sram_write(tp, 0x80cb, 0x2007);
-+ data = sram_read(tp, 0x80ce);
-+ data &= ~0xff00;
-+ data |= 0x6c00;
-+ sram_write(tp, 0x80ce, data);
-+ sram_write(tp, 0x80c9, 0x8009);
-+ data = sram_read(tp, 0x80d1);
-+ data &= ~0xff00;
-+ data |= 0x8000;
-+ sram_write(tp, 0x80d1, data);
-+ sram_write(tp, 0x80a3, 0x200a);
-+ sram_write(tp, 0x80a5, 0xf0ad);
-+ sram_write(tp, 0x809f, 0x6073);
-+ sram_write(tp, 0x80a1, 0x000b);
-+ data = sram_read(tp, 0x80a9);
-+ data &= ~0xff00;
-+ data |= 0xc000;
-+ sram_write(tp, 0x80a9, data);
-+
-+ if (rtl_phy_patch_request(tp, true, true))
-+ return;
-+
-+ data = ocp_reg_read(tp, 0xb896);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xb896, data);
-+ data = ocp_reg_read(tp, 0xb892);
-+ data &= ~0xff00;
-+ ocp_reg_write(tp, 0xb892, data);
-+ ocp_reg_write(tp, 0xb88e, 0xc23e);
-+ ocp_reg_write(tp, 0xb890, 0x0000);
-+ ocp_reg_write(tp, 0xb88e, 0xc240);
-+ ocp_reg_write(tp, 0xb890, 0x0103);
-+ ocp_reg_write(tp, 0xb88e, 0xc242);
-+ ocp_reg_write(tp, 0xb890, 0x0507);
-+ ocp_reg_write(tp, 0xb88e, 0xc244);
-+ ocp_reg_write(tp, 0xb890, 0x090b);
-+ ocp_reg_write(tp, 0xb88e, 0xc246);
-+ ocp_reg_write(tp, 0xb890, 0x0c0e);
-+ ocp_reg_write(tp, 0xb88e, 0xc248);
-+ ocp_reg_write(tp, 0xb890, 0x1012);
-+ ocp_reg_write(tp, 0xb88e, 0xc24a);
-+ ocp_reg_write(tp, 0xb890, 0x1416);
-+ data = ocp_reg_read(tp, 0xb896);
-+ data |= BIT(0);
-+ ocp_reg_write(tp, 0xb896, data);
-+
-+ rtl_phy_patch_request(tp, false, true);
-+
-+ data = ocp_reg_read(tp, 0xa86a);
-+ data |= BIT(0);
-+ ocp_reg_write(tp, 0xa86a, data);
-+ data = ocp_reg_read(tp, 0xa6f0);
-+ data |= BIT(0);
-+ ocp_reg_write(tp, 0xa6f0, data);
-+
-+ ocp_reg_write(tp, 0xbfa0, 0xd70d);
-+ ocp_reg_write(tp, 0xbfa2, 0x4100);
-+ ocp_reg_write(tp, 0xbfa4, 0xe868);
-+ ocp_reg_write(tp, 0xbfa6, 0xdc59);
-+ ocp_reg_write(tp, 0xb54c, 0x3c18);
-+ data = ocp_reg_read(tp, 0xbfa4);
-+ data &= ~BIT(5);
-+ ocp_reg_write(tp, 0xbfa4, data);
-+ data = sram_read(tp, 0x817d);
-+ data |= BIT(12);
-+ sram_write(tp, 0x817d, data);
-+ break;
-+ case RTL_VER_13:
-+ /* 2.5G INRX */
-+ data = ocp_reg_read(tp, 0xac46);
-+ data &= ~0x00f0;
-+ data |= 0x0090;
-+ ocp_reg_write(tp, 0xac46, data);
-+ data = ocp_reg_read(tp, 0xad30);
-+ data &= ~0x0003;
-+ data |= 0x0001;
-+ ocp_reg_write(tp, 0xad30, data);
-+ fallthrough;
-+ case RTL_VER_15:
-+ /* EEE parameter */
-+ ocp_reg_write(tp, 0xb87c, 0x80f5);
-+ ocp_reg_write(tp, 0xb87e, 0x760e);
-+ ocp_reg_write(tp, 0xb87c, 0x8107);
-+ ocp_reg_write(tp, 0xb87e, 0x360e);
-+ ocp_reg_write(tp, 0xb87c, 0x8551);
-+ data = ocp_reg_read(tp, 0xb87e);
-+ data &= ~0xff00;
-+ data |= 0x0800;
-+ ocp_reg_write(tp, 0xb87e, data);
-+
-+ /* ADC_PGA parameter */
-+ data = ocp_reg_read(tp, 0xbf00);
-+ data &= ~0xe000;
-+ data |= 0xa000;
-+ ocp_reg_write(tp, 0xbf00, data);
-+ data = ocp_reg_read(tp, 0xbf46);
-+ data &= ~0x0f00;
-+ data |= 0x0300;
-+ ocp_reg_write(tp, 0xbf46, data);
-+
-+ /* Green Table-PGA, 1G full viterbi */
-+ sram_write(tp, 0x8044, 0x2417);
-+ sram_write(tp, 0x804a, 0x2417);
-+ sram_write(tp, 0x8050, 0x2417);
-+ sram_write(tp, 0x8056, 0x2417);
-+ sram_write(tp, 0x805c, 0x2417);
-+ sram_write(tp, 0x8062, 0x2417);
-+ sram_write(tp, 0x8068, 0x2417);
-+ sram_write(tp, 0x806e, 0x2417);
-+ sram_write(tp, 0x8074, 0x2417);
-+ sram_write(tp, 0x807a, 0x2417);
-+
-+ /* XG PLL */
-+ data = ocp_reg_read(tp, 0xbf84);
-+ data &= ~0xe000;
-+ data |= 0xa000;
-+ ocp_reg_write(tp, 0xbf84, data);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if (rtl_phy_patch_request(tp, true, true))
-+ return;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
-+ ocp_data |= EEE_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
-+
-+ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
-+ data &= ~(EN_EEE_100 | EN_EEE_1000);
-+ data |= EN_10M_CLKDIV;
-+ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
-+ tp->ups_info._10m_ckdiv = true;
-+ tp->ups_info.eee_plloff_100 = false;
-+ tp->ups_info.eee_plloff_giga = false;
-+
-+ data = ocp_reg_read(tp, OCP_POWER_CFG);
-+ data &= ~EEE_CLKDIV_EN;
-+ ocp_reg_write(tp, OCP_POWER_CFG, data);
-+ tp->ups_info.eee_ckdiv = false;
-+
-+ rtl_phy_patch_request(tp, false, true);
-+
-+ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
-+
-+ data = ocp_reg_read(tp, 0xa428);
-+ data &= ~BIT(9);
-+ ocp_reg_write(tp, 0xa428, data);
-+ data = ocp_reg_read(tp, 0xa5ea);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa5ea, data);
-+ tp->ups_info.lite_mode = 0;
-+
-+ if (tp->eee_en)
-+ rtl_eee_enable(tp, true);
-+
-+ r8153_aldps_en(tp, true);
-+ r8152b_enable_fc(tp);
-+ r8153_u2p3en(tp, true);
-+
-+ set_bit(PHY_RESET, &tp->flags);
-+}
-+
-+static void r8156_init(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 data;
-+ int i;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
-+ ocp_data &= ~EN_ALL_SPEED;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
-+
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
-+ ocp_data |= BYPASS_MAC_RESET;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
-+
-+ r8153b_u1u2en(tp, false);
-+
-+ for (i = 0; i < 500; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+ AUTOLOAD_DONE)
-+ break;
-+
-+ msleep(20);
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+ }
-+
-+ data = r8153_phy_status(tp, 0);
-+ if (data == PHY_STAT_EXT_INIT) {
-+ data = ocp_reg_read(tp, 0xa468);
-+ data &= ~(BIT(3) | BIT(1));
-+ ocp_reg_write(tp, 0xa468, data);
-+ }
-+
-+ data = r8152_mdio_read(tp, MII_BMCR);
-+ if (data & BMCR_PDOWN) {
-+ data &= ~BMCR_PDOWN;
-+ r8152_mdio_write(tp, MII_BMCR, data);
-+ }
-+
-+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
-+
-+ r8153_u2p3en(tp, false);
-+
-+ /* MSC timer = 0xfff * 8ms = 32760 ms */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+ /* U1/U2/L1 idle timer. 500 us */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+ r8153b_power_cut_en(tp, false);
-+ r8156_ups_en(tp, false);
-+ r8153_queue_wake(tp, false);
-+ rtl_runtime_suspend_enable(tp, false);
-+
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
-+ r8153b_u1u2en(tp, true);
-+
-+ usb_enable_lpm(tp->udev);
-+
-+ r8156_mac_clk_spd(tp, true);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+ ocp_data &= ~PLA_MCU_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+ if (rtl8152_get_speed(tp) & LINK_STATUS)
-+ ocp_data |= CUR_LINK_OK;
-+ else
-+ ocp_data &= ~CUR_LINK_OK;
-+ ocp_data |= POLL_LINK_CHG;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+ set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+ /* rx aggregation */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
-+ ocp_data |= ACT_ODMA;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
-+
-+ rtl_tally_reset(tp);
-+
-+ tp->coalesce = 15000; /* 15 us */
-+}
-+
-+static void r8156b_init(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+ u16 data;
-+ int i;
-+
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+
-+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
-+ ocp_data &= ~EN_ALL_SPEED;
-+ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
-+
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
-+ ocp_data |= BYPASS_MAC_RESET;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
-+ ocp_data |= RX_DETECT8;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
-+
-+ r8153b_u1u2en(tp, false);
-+
-+ switch (tp->version) {
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ r8156b_wait_loading_flash(tp);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ for (i = 0; i < 500; i++) {
-+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
-+ AUTOLOAD_DONE)
-+ break;
-+
-+ msleep(20);
-+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
-+ return;
-+ }
-+
-+ data = r8153_phy_status(tp, 0);
-+ if (data == PHY_STAT_EXT_INIT) {
-+ data = ocp_reg_read(tp, 0xa468);
-+ data &= ~(BIT(3) | BIT(1));
-+ ocp_reg_write(tp, 0xa468, data);
-+
-+ data = ocp_reg_read(tp, 0xa466);
-+ data &= ~BIT(0);
-+ ocp_reg_write(tp, 0xa466, data);
-+ }
-+
-+ data = r8152_mdio_read(tp, MII_BMCR);
-+ if (data & BMCR_PDOWN) {
-+ data &= ~BMCR_PDOWN;
-+ r8152_mdio_write(tp, MII_BMCR, data);
-+ }
-+
-+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
-+
-+ r8153_u2p3en(tp, false);
-+
-+ /* MSC timer = 0xfff * 8ms = 32760 ms */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
-+
-+ /* U1/U2/L1 idle timer. 500 us */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
-+
-+ r8153b_power_cut_en(tp, false);
-+ r8156_ups_en(tp, false);
-+ r8153_queue_wake(tp, false);
-+ rtl_runtime_suspend_enable(tp, false);
-+
-+ if (tp->udev->speed >= USB_SPEED_SUPER)
-+ r8153b_u1u2en(tp, true);
-+
-+ usb_enable_lpm(tp->udev);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
-+ ocp_data &= ~SLOT_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
-+ ocp_data |= FLOW_CTRL_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
-+
-+ /* enable fc timer and set timer to 600 ms. */
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
-+ CTRL_TIMER_EN | (600 / 8));
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
-+ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
-+ ocp_data |= FLOW_CTRL_PATCH_2;
-+ ocp_data &= ~AUTO_SPEEDUP;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
-+ ocp_data |= FC_PATCH_TASK;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
-+
-+ r8156_mac_clk_spd(tp, true);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
-+ ocp_data &= ~PLA_MCU_SPDWN_EN;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
-+ if (rtl8152_get_speed(tp) & LINK_STATUS)
-+ ocp_data |= CUR_LINK_OK;
-+ else
-+ ocp_data &= ~CUR_LINK_OK;
-+ ocp_data |= POLL_LINK_CHG;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
-+
-+ set_bit(GREEN_ETHERNET, &tp->flags);
-+
-+ /* rx aggregation */
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+ rtl_tally_reset(tp);
-+
-+ tp->coalesce = 15000; /* 15 us */
-+}
-+
- static int rtl8152_pre_reset(struct usb_interface *intf)
- {
- struct r8152 *tp = usb_get_intfdata(intf);
-@@ -6015,6 +7947,22 @@ int rtl8152_get_link_ksettings(struct ne
-
- mii_ethtool_get_link_ksettings(&tp->mii, cmd);
-
-+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+ cmd->link_modes.supported, tp->support_2500full);
-+
-+ if (tp->support_2500full) {
-+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+ cmd->link_modes.advertising,
-+ ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G);
-+
-+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+ cmd->link_modes.lp_advertising,
-+ ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G);
-+
-+ if (is_speed_2500(rtl8152_get_speed(tp)))
-+ cmd->base.speed = SPEED_2500;
-+ }
-+
- mutex_unlock(&tp->control);
-
- usb_autopm_put_interface(tp->intf);
-@@ -6058,6 +8006,10 @@ static int rtl8152_set_link_ksettings(st
- cmd->link_modes.advertising))
- advertising |= RTL_ADVERTISED_1000_FULL;
-
-+ if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+ cmd->link_modes.advertising))
-+ advertising |= RTL_ADVERTISED_2500_FULL;
-+
- mutex_lock(&tp->control);
-
- ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
-@@ -6647,6 +8599,67 @@ static int rtl_ops_init(struct r8152 *tp
- tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
- break;
-
-+ case RTL_VER_11:
-+ tp->eee_en = true;
-+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
-+ fallthrough;
-+ case RTL_VER_10:
-+ ops->init = r8156_init;
-+ ops->enable = rtl8156_enable;
-+ ops->disable = rtl8153_disable;
-+ ops->up = rtl8156_up;
-+ ops->down = rtl8156_down;
-+ ops->unload = rtl8153_unload;
-+ ops->eee_get = r8153_get_eee;
-+ ops->eee_set = r8152_set_eee;
-+ ops->in_nway = rtl8153_in_nway;
-+ ops->hw_phy_cfg = r8156_hw_phy_cfg;
-+ ops->autosuspend_en = rtl8156_runtime_enable;
-+ ops->change_mtu = rtl8156_change_mtu;
-+ tp->rx_buf_sz = 48 * 1024;
-+ tp->support_2500full = 1;
-+ break;
-+
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ tp->support_2500full = 1;
-+ fallthrough;
-+ case RTL_VER_15:
-+ tp->eee_en = true;
-+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
-+ ops->init = r8156b_init;
-+ ops->enable = rtl8156b_enable;
-+ ops->disable = rtl8153_disable;
-+ ops->up = rtl8156_up;
-+ ops->down = rtl8156_down;
-+ ops->unload = rtl8153_unload;
-+ ops->eee_get = r8153_get_eee;
-+ ops->eee_set = r8152_set_eee;
-+ ops->in_nway = rtl8153_in_nway;
-+ ops->hw_phy_cfg = r8156b_hw_phy_cfg;
-+ ops->autosuspend_en = rtl8156_runtime_enable;
-+ ops->change_mtu = rtl8156_change_mtu;
-+ tp->rx_buf_sz = 48 * 1024;
-+ break;
-+
-+ case RTL_VER_14:
-+ ops->init = r8153c_init;
-+ ops->enable = rtl8153_enable;
-+ ops->disable = rtl8153_disable;
-+ ops->up = rtl8153c_up;
-+ ops->down = rtl8153b_down;
-+ ops->unload = rtl8153_unload;
-+ ops->eee_get = r8153_get_eee;
-+ ops->eee_set = r8152_set_eee;
-+ ops->in_nway = rtl8153_in_nway;
-+ ops->hw_phy_cfg = r8153c_hw_phy_cfg;
-+ ops->autosuspend_en = rtl8153c_runtime_enable;
-+ ops->change_mtu = rtl8153c_change_mtu;
-+ tp->rx_buf_sz = 32 * 1024;
-+ tp->eee_en = true;
-+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
-+ break;
-+
- default:
- ret = -ENODEV;
- dev_err(&tp->intf->dev, "Unknown Device\n");
-@@ -6660,11 +8673,13 @@ static int rtl_ops_init(struct r8152 *tp
- #define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
- #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
- #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
-+#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
-
- MODULE_FIRMWARE(FIRMWARE_8153A_2);
- MODULE_FIRMWARE(FIRMWARE_8153A_3);
- MODULE_FIRMWARE(FIRMWARE_8153A_4);
- MODULE_FIRMWARE(FIRMWARE_8153B_2);
-+MODULE_FIRMWARE(FIRMWARE_8153C_1);
-
- static int rtl_fw_init(struct r8152 *tp)
- {
-@@ -6690,6 +8705,11 @@ static int rtl_fw_init(struct r8152 *tp)
- rtl_fw->pre_fw = r8153b_pre_firmware_1;
- rtl_fw->post_fw = r8153b_post_firmware_1;
- break;
-+ case RTL_VER_14:
-+ rtl_fw->fw_name = FIRMWARE_8153C_1;
-+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
-+ rtl_fw->post_fw = r8153c_post_firmware_1;
-+ break;
- default:
- break;
- }
-@@ -6745,6 +8765,27 @@ u8 rtl8152_get_version(struct usb_interf
- case 0x6010:
- version = RTL_VER_09;
- break;
-+ case 0x7010:
-+ version = RTL_TEST_01;
-+ break;
-+ case 0x7020:
-+ version = RTL_VER_10;
-+ break;
-+ case 0x7030:
-+ version = RTL_VER_11;
-+ break;
-+ case 0x7400:
-+ version = RTL_VER_12;
-+ break;
-+ case 0x7410:
-+ version = RTL_VER_13;
-+ break;
-+ case 0x6400:
-+ version = RTL_VER_14;
-+ break;
-+ case 0x7420:
-+ version = RTL_VER_15;
-+ break;
- default:
- version = RTL_VER_UNKNOWN;
- dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
-@@ -6857,12 +8898,29 @@ static int rtl8152_probe(struct usb_inte
- /* MTU range: 68 - 1500 or 9194 */
- netdev->min_mtu = ETH_MIN_MTU;
- switch (tp->version) {
-+ case RTL_VER_03:
-+ case RTL_VER_04:
-+ case RTL_VER_05:
-+ case RTL_VER_06:
-+ case RTL_VER_08:
-+ case RTL_VER_09:
-+ case RTL_VER_14:
-+ netdev->max_mtu = size_to_mtu(9 * 1024);
-+ break;
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ netdev->max_mtu = size_to_mtu(15 * 1024);
-+ break;
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ netdev->max_mtu = size_to_mtu(16 * 1024);
-+ break;
- case RTL_VER_01:
- case RTL_VER_02:
-- netdev->max_mtu = ETH_DATA_LEN;
-- break;
-+ case RTL_VER_07:
- default:
-- netdev->max_mtu = size_to_mtu(9 * 1024);
-+ netdev->max_mtu = ETH_DATA_LEN;
- break;
- }
-
-@@ -6878,7 +8936,13 @@ static int rtl8152_probe(struct usb_inte
- tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
- RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
- if (tp->mii.supports_gmii) {
-- tp->speed = SPEED_1000;
-+ if (tp->support_2500full &&
-+ tp->udev->speed >= USB_SPEED_SUPER) {
-+ tp->speed = SPEED_2500;
-+ tp->advertising |= RTL_ADVERTISED_2500_FULL;
-+ } else {
-+ tp->speed = SPEED_1000;
-+ }
- tp->advertising |= RTL_ADVERTISED_1000_FULL;
- }
- tp->duplex = DUPLEX_FULL;
-@@ -6902,7 +8966,11 @@ static int rtl8152_probe(struct usb_inte
- set_ethernet_addr(tp);
-
- usb_set_intfdata(intf, tp);
-- netif_napi_add(netdev, &tp->napi, r8152_poll, RTL8152_NAPI_WEIGHT);
-+
-+ if (tp->support_2500full)
-+ netif_napi_add(netdev, &tp->napi, r8152_poll, 256);
-+ else
-+ netif_napi_add(netdev, &tp->napi, r8152_poll, 64);
-
- ret = register_netdev(netdev);
- if (ret != 0) {
-@@ -6938,7 +9006,8 @@ static void rtl8152_disconnect(struct us
- unregister_netdev(tp->netdev);
- tasklet_kill(&tp->tx_tl);
- cancel_delayed_work_sync(&tp->hw_phy_work);
-- tp->rtl_ops.unload(tp);
-+ if (tp->rtl_ops.unload)
-+ tp->rtl_ops.unload(tp);
- rtl8152_release_firmware(tp);
- free_netdev(tp->netdev);
- }
-@@ -6958,13 +9027,28 @@ static void rtl8152_disconnect(struct us
- .idProduct = (prod), \
- .bInterfaceClass = USB_CLASS_COMM, \
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
-+ .bInterfaceProtocol = USB_CDC_PROTO_NONE \
-+}, \
-+{ \
-+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \
-+ USB_DEVICE_ID_MATCH_DEVICE, \
-+ .idVendor = (vend), \
-+ .idProduct = (prod), \
-+ .bInterfaceClass = USB_CLASS_COMM, \
-+ .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \
- .bInterfaceProtocol = USB_CDC_PROTO_NONE
-
- /* table of devices that work with this driver */
- static const struct usb_device_id rtl8152_table[] = {
-+ /* Realtek */
- {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050)},
-+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053)},
- {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
- {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
-+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155)},
-+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156)},
-+
-+ /* Microsoft */
- {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
- {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
- {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
+++ /dev/null
-From ca09589a72a0aa17389754fb75a5cd1a5d46818f Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:36 +0800
-Subject: [PATCH] r8152: support PHY firmware for RTL8156 series
-
-commit 4a51b0e8a0143b0e83d51d9c58c6416c3818a9f2 upstream.
-
-Support new firmware type and method for RTL8156 series.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 563 +++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 561 insertions(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -975,8 +975,60 @@ enum rtl8152_fw_flags {
- FW_FLAGS_START,
- FW_FLAGS_STOP,
- FW_FLAGS_NC,
-+ FW_FLAGS_NC1,
-+ FW_FLAGS_NC2,
-+ FW_FLAGS_UC2,
-+ FW_FLAGS_UC,
-+ FW_FLAGS_SPEED_UP,
-+ FW_FLAGS_VER,
- };
-
-+enum rtl8152_fw_fixup_cmd {
-+ FW_FIXUP_AND = 0,
-+ FW_FIXUP_OR,
-+ FW_FIXUP_NOT,
-+ FW_FIXUP_XOR,
-+};
-+
-+struct fw_phy_set {
-+ __le16 addr;
-+ __le16 data;
-+} __packed;
-+
-+struct fw_phy_speed_up {
-+ struct fw_block blk_hdr;
-+ __le16 fw_offset;
-+ __le16 version;
-+ __le16 fw_reg;
-+ __le16 reserved;
-+ char info[];
-+} __packed;
-+
-+struct fw_phy_ver {
-+ struct fw_block blk_hdr;
-+ struct fw_phy_set ver;
-+ __le32 reserved;
-+} __packed;
-+
-+struct fw_phy_fixup {
-+ struct fw_block blk_hdr;
-+ struct fw_phy_set setting;
-+ __le16 bit_cmd;
-+ __le16 reserved;
-+} __packed;
-+
-+struct fw_phy_union {
-+ struct fw_block blk_hdr;
-+ __le16 fw_offset;
-+ __le16 fw_reg;
-+ struct fw_phy_set pre_set[2];
-+ struct fw_phy_set bp[8];
-+ struct fw_phy_set bp_en;
-+ u8 pre_num;
-+ u8 bp_num;
-+ char info[];
-+} __packed;
-+
- /**
- * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
- * The layout of the firmware block is:
-@@ -1081,6 +1133,15 @@ enum rtl_fw_type {
- RTL_FW_PHY_START,
- RTL_FW_PHY_STOP,
- RTL_FW_PHY_NC,
-+ RTL_FW_PHY_FIXUP,
-+ RTL_FW_PHY_UNION_NC,
-+ RTL_FW_PHY_UNION_NC1,
-+ RTL_FW_PHY_UNION_NC2,
-+ RTL_FW_PHY_UNION_UC2,
-+ RTL_FW_PHY_UNION_UC,
-+ RTL_FW_PHY_UNION_MISC,
-+ RTL_FW_PHY_SPEED_UP,
-+ RTL_FW_PHY_VER,
- };
-
- enum rtl_version {
-@@ -4000,6 +4061,162 @@ static int rtl_post_ram_code(struct r815
- return 0;
- }
-
-+static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
-+{
-+ u16 fw_offset;
-+ u32 length;
-+ bool rc = false;
-+
-+ switch (tp->version) {
-+ case RTL_VER_01:
-+ case RTL_VER_02:
-+ case RTL_VER_03:
-+ case RTL_VER_04:
-+ case RTL_VER_05:
-+ case RTL_VER_06:
-+ case RTL_VER_07:
-+ case RTL_VER_08:
-+ case RTL_VER_09:
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_14:
-+ goto out;
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ default:
-+ break;
-+ }
-+
-+ fw_offset = __le16_to_cpu(phy->fw_offset);
-+ length = __le32_to_cpu(phy->blk_hdr.length);
-+ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
-+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
-+ goto out;
-+ }
-+
-+ length -= fw_offset;
-+ if (length & 3) {
-+ dev_err(&tp->intf->dev, "invalid block length\n");
-+ goto out;
-+ }
-+
-+ if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
-+ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
-+ goto out;
-+ }
-+
-+ rc = true;
-+out:
-+ return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
-+{
-+ bool rc = false;
-+
-+ switch (tp->version) {
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ break;
-+ default:
-+ goto out;
-+ }
-+
-+ if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
-+ dev_err(&tp->intf->dev, "invalid block length\n");
-+ goto out;
-+ }
-+
-+ if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
-+ dev_err(&tp->intf->dev, "invalid phy ver addr\n");
-+ goto out;
-+ }
-+
-+ rc = true;
-+out:
-+ return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
-+{
-+ bool rc = false;
-+
-+ switch (tp->version) {
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ break;
-+ default:
-+ goto out;
-+ }
-+
-+ if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
-+ dev_err(&tp->intf->dev, "invalid block length\n");
-+ goto out;
-+ }
-+
-+ if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
-+ __le16_to_cpu(fix->setting.data) != BIT(7)) {
-+ dev_err(&tp->intf->dev, "invalid phy fixup\n");
-+ goto out;
-+ }
-+
-+ rc = true;
-+out:
-+ return rc;
-+}
-+
-+static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
-+{
-+ u16 fw_offset;
-+ u32 length;
-+ bool rc = false;
-+
-+ switch (tp->version) {
-+ case RTL_VER_10:
-+ case RTL_VER_11:
-+ case RTL_VER_12:
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ break;
-+ default:
-+ goto out;
-+ }
-+
-+ fw_offset = __le16_to_cpu(phy->fw_offset);
-+ length = __le32_to_cpu(phy->blk_hdr.length);
-+ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
-+ dev_err(&tp->intf->dev, "invalid fw_offset\n");
-+ goto out;
-+ }
-+
-+ length -= fw_offset;
-+ if (length & 1) {
-+ dev_err(&tp->intf->dev, "invalid block length\n");
-+ goto out;
-+ }
-+
-+ if (phy->pre_num > 2) {
-+ dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
-+ goto out;
-+ }
-+
-+ if (phy->bp_num > 8) {
-+ dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
-+ goto out;
-+ }
-+
-+ rc = true;
-+out:
-+ return rc;
-+}
-+
- static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
- {
- u32 length;
-@@ -4320,6 +4537,10 @@ static long rtl8152_check_firmware(struc
- case RTL_FW_PHY_START:
- if (test_bit(FW_FLAGS_START, &fw_flags) ||
- test_bit(FW_FLAGS_NC, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
- test_bit(FW_FLAGS_STOP, &fw_flags)) {
- dev_err(&tp->intf->dev,
- "check PHY_START fail\n");
-@@ -4368,7 +4589,153 @@ static long rtl8152_check_firmware(struc
- goto fail;
- }
- __set_bit(FW_FLAGS_NC, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_NC:
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
-+ goto fail;
-+ }
-
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_NC, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_NC1:
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_NC1, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_NC2:
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_NC2, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_UC2:
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_UC2, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_UC:
-+ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_UC, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_UC, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_UNION_MISC:
-+ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
-+ dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
-+ goto fail;
-+ }
-+ break;
-+ case RTL_FW_PHY_FIXUP:
-+ if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY fixup failed\n");
-+ goto fail;
-+ }
-+ break;
-+ case RTL_FW_PHY_SPEED_UP:
-+ if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY speed up failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
-+ break;
-+ case RTL_FW_PHY_VER:
-+ if (test_bit(FW_FLAGS_START, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC1, &fw_flags) ||
-+ test_bit(FW_FLAGS_NC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC2, &fw_flags) ||
-+ test_bit(FW_FLAGS_UC, &fw_flags) ||
-+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
-+ goto fail;
-+ }
-+
-+ if (test_bit(FW_FLAGS_VER, &fw_flags)) {
-+ dev_err(&tp->intf->dev, "multiple PHY version encountered");
-+ goto fail;
-+ }
-+
-+ if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
-+ dev_err(&tp->intf->dev, "check PHY version failed\n");
-+ goto fail;
-+ }
-+ __set_bit(FW_FLAGS_VER, &fw_flags);
- break;
- default:
- dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
-@@ -4391,6 +4758,143 @@ fail:
- return ret;
- }
-
-+static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
-+{
-+ u32 len;
-+ u8 *data;
-+
-+ if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
-+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
-+ return;
-+ }
-+
-+ len = __le32_to_cpu(phy->blk_hdr.length);
-+ len -= __le16_to_cpu(phy->fw_offset);
-+ data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
-+
-+ if (rtl_phy_patch_request(tp, true, wait))
-+ return;
-+
-+ while (len) {
-+ u32 ocp_data, size;
-+ int i;
-+
-+ if (len < 2048)
-+ size = len;
-+ else
-+ size = 2048;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
-+ ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
-+
-+ generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
-+
-+ data += size;
-+ len -= size;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
-+ ocp_data |= POL_GPHY_PATCH;
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
-+
-+ for (i = 0; i < 1000; i++) {
-+ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
-+ break;
-+ }
-+
-+ if (i == 1000) {
-+ dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
-+ return;
-+ }
-+ }
-+
-+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-+ rtl_phy_patch_request(tp, false, wait);
-+
-+ if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
-+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
-+ else
-+ dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
-+}
-+
-+static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
-+{
-+ u16 ver_addr, ver;
-+
-+ ver_addr = __le16_to_cpu(phy_ver->ver.addr);
-+ ver = __le16_to_cpu(phy_ver->ver.data);
-+
-+ if (sram_read(tp, ver_addr) >= ver) {
-+ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
-+ return 0;
-+ }
-+
-+ sram_write(tp, ver_addr, ver);
-+
-+ dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
-+
-+ return ver;
-+}
-+
-+static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
-+{
-+ u16 addr, data;
-+
-+ addr = __le16_to_cpu(fix->setting.addr);
-+ data = ocp_reg_read(tp, addr);
-+
-+ switch (__le16_to_cpu(fix->bit_cmd)) {
-+ case FW_FIXUP_AND:
-+ data &= __le16_to_cpu(fix->setting.data);
-+ break;
-+ case FW_FIXUP_OR:
-+ data |= __le16_to_cpu(fix->setting.data);
-+ break;
-+ case FW_FIXUP_NOT:
-+ data &= ~__le16_to_cpu(fix->setting.data);
-+ break;
-+ case FW_FIXUP_XOR:
-+ data ^= __le16_to_cpu(fix->setting.data);
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ ocp_reg_write(tp, addr, data);
-+
-+ dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
-+}
-+
-+static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
-+{
-+ __le16 *data;
-+ u32 length;
-+ int i, num;
-+
-+ num = phy->pre_num;
-+ for (i = 0; i < num; i++)
-+ sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
-+ __le16_to_cpu(phy->pre_set[i].data));
-+
-+ length = __le32_to_cpu(phy->blk_hdr.length);
-+ length -= __le16_to_cpu(phy->fw_offset);
-+ num = length / 2;
-+ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
-+
-+ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
-+ for (i = 0; i < num; i++)
-+ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
-+
-+ num = phy->bp_num;
-+ for (i = 0; i < num; i++)
-+ sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
-+
-+ if (phy->bp_num && phy->bp_en.addr)
-+ sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
-+
-+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
-+}
-+
- static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
- {
- u16 mode_reg, bp_index;
-@@ -4444,6 +4948,12 @@ static void rtl8152_fw_mac_apply(struct
- return;
- }
-
-+ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
-+ if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
-+ dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
-+ return;
-+ }
-+
- rtl_clear_bp(tp, type);
-
- /* Enable backup/restore of MACDBG. This is required after clearing PLA
-@@ -4479,7 +4989,6 @@ static void rtl8152_fw_mac_apply(struct
- ocp_write_word(tp, type, bp_en_addr,
- __le16_to_cpu(mac->bp_en_value));
-
-- fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
- if (fw_ver_reg)
- ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
- mac->fw_ver_data);
-@@ -4494,7 +5003,7 @@ static void rtl8152_apply_firmware(struc
- struct fw_header *fw_hdr;
- struct fw_phy_patch_key *key;
- u16 key_addr = 0;
-- int i;
-+ int i, patch_phy = 1;
-
- if (IS_ERR_OR_NULL(rtl_fw->fw))
- return;
-@@ -4516,17 +5025,40 @@ static void rtl8152_apply_firmware(struc
- rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
- break;
- case RTL_FW_PHY_START:
-+ if (!patch_phy)
-+ break;
- key = (struct fw_phy_patch_key *)block;
- key_addr = __le16_to_cpu(key->key_reg);
- rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
- break;
- case RTL_FW_PHY_STOP:
-+ if (!patch_phy)
-+ break;
- WARN_ON(!key_addr);
- rtl_post_ram_code(tp, key_addr, !power_cut);
- break;
- case RTL_FW_PHY_NC:
- rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
- break;
-+ case RTL_FW_PHY_VER:
-+ patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
-+ break;
-+ case RTL_FW_PHY_UNION_NC:
-+ case RTL_FW_PHY_UNION_NC1:
-+ case RTL_FW_PHY_UNION_NC2:
-+ case RTL_FW_PHY_UNION_UC2:
-+ case RTL_FW_PHY_UNION_UC:
-+ case RTL_FW_PHY_UNION_MISC:
-+ if (patch_phy)
-+ rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
-+ break;
-+ case RTL_FW_PHY_FIXUP:
-+ if (patch_phy)
-+ rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
-+ break;
-+ case RTL_FW_PHY_SPEED_UP:
-+ rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
-+ break;
- default:
- break;
- }
-@@ -5034,6 +5566,21 @@ static int r8153c_post_firmware_1(struct
- return 0;
- }
-
-+static int r8156a_post_firmware_1(struct r8152 *tp)
-+{
-+ u32 ocp_data;
-+
-+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
-+ ocp_data |= FW_IP_RESET_EN;
-+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
-+
-+ /* Modify U3PHY parameter for compatibility issue */
-+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
-+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
-+
-+ return 0;
-+}
-+
- static void r8153_aldps_en(struct r8152 *tp, bool enable)
- {
- u16 data;
-@@ -8674,12 +9221,16 @@ static int rtl_ops_init(struct r8152 *tp
- #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
- #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
- #define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
-+#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw"
-+#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw"
-
- MODULE_FIRMWARE(FIRMWARE_8153A_2);
- MODULE_FIRMWARE(FIRMWARE_8153A_3);
- MODULE_FIRMWARE(FIRMWARE_8153A_4);
- MODULE_FIRMWARE(FIRMWARE_8153B_2);
- MODULE_FIRMWARE(FIRMWARE_8153C_1);
-+MODULE_FIRMWARE(FIRMWARE_8156A_2);
-+MODULE_FIRMWARE(FIRMWARE_8156B_2);
-
- static int rtl_fw_init(struct r8152 *tp)
- {
-@@ -8705,6 +9256,14 @@ static int rtl_fw_init(struct r8152 *tp)
- rtl_fw->pre_fw = r8153b_pre_firmware_1;
- rtl_fw->post_fw = r8153b_post_firmware_1;
- break;
-+ case RTL_VER_11:
-+ rtl_fw->fw_name = FIRMWARE_8156A_2;
-+ rtl_fw->post_fw = r8156a_post_firmware_1;
-+ break;
-+ case RTL_VER_13:
-+ case RTL_VER_15:
-+ rtl_fw->fw_name = FIRMWARE_8156B_2;
-+ break;
- case RTL_VER_14:
- rtl_fw->fw_name = FIRMWARE_8153C_1;
- rtl_fw->pre_fw = r8153b_pre_firmware_1;
+++ /dev/null
-From 579f58dd2819910354753bc5489fc1588fe9cfe2 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Fri, 16 Apr 2021 16:04:37 +0800
-Subject: [PATCH] r8152: search the configuration of vendor mode
-
-commit c2198943e33b100ed21dfb636c8fa6baef841e9d upstream.
-
-The vendor mode is not always at config #1, so it is necessary to
-set the correct configuration number.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 39 +++++++++++++++++++++++++++++++++++----
- 1 file changed, 35 insertions(+), 4 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -30,7 +30,7 @@
- #include <linux/usb/r8152.h>
-
- /* Information for net-next */
--#define NETNEXT_VERSION "11"
-+#define NETNEXT_VERSION "12"
-
- /* Information for net */
- #define NET_VERSION "11"
-@@ -8131,6 +8131,39 @@ static void r8156b_init(struct r8152 *tp
- tp->coalesce = 15000; /* 15 us */
- }
-
-+static bool rtl_vendor_mode(struct usb_interface *intf)
-+{
-+ struct usb_host_interface *alt = intf->cur_altsetting;
-+ struct usb_device *udev;
-+ struct usb_host_config *c;
-+ int i, num_configs;
-+
-+ if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC)
-+ return true;
-+
-+ /* The vendor mode is not always config #1, so to find it out. */
-+ udev = interface_to_usbdev(intf);
-+ c = udev->config;
-+ num_configs = udev->descriptor.bNumConfigurations;
-+ for (i = 0; i < num_configs; (i++, c++)) {
-+ struct usb_interface_descriptor *desc = NULL;
-+
-+ if (c->desc.bNumInterfaces > 0)
-+ desc = &c->intf_cache[0]->altsetting->desc;
-+ else
-+ continue;
-+
-+ if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
-+ usb_driver_set_configuration(udev, c->desc.bConfigurationValue);
-+ break;
-+ }
-+ }
-+
-+ WARN_ON_ONCE(i == num_configs);
-+
-+ return false;
-+}
-+
- static int rtl8152_pre_reset(struct usb_interface *intf)
- {
- struct r8152 *tp = usb_get_intfdata(intf);
-@@ -9369,10 +9402,8 @@ static int rtl8152_probe(struct usb_inte
- if (version == RTL_VER_UNKNOWN)
- return -ENODEV;
-
-- if (udev->actconfig->desc.bConfigurationValue != 1) {
-- usb_driver_set_configuration(udev, 1);
-+ if (!rtl_vendor_mode(intf))
- return -ENODEV;
-- }
-
- if (intf->cur_altsetting->desc.bNumEndpoints < 3)
- return -ENODEV;
--- /dev/null
+From 586f04ce6a391419ca3cc9cef6b6f38570cede88 Mon Sep 17 00:00:00 2001
+From: Lee Jones <lee.jones@linaro.org>
+Date: Mon, 2 Nov 2020 11:45:04 +0000
+Subject: [PATCH] net: usb: r8152: Provide missing documentation for
+ some struct members
+
+commit 34e653efb602e0651867fb5ab14369b555a61dcd upstream.
+
+Fixes the following W=1 kernel build warning(s):
+
+ drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac'
+ drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac'
+ drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key'
+ drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key'
+ drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc'
+ drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
+ drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
+ drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc'
+
+Signed-off-by: Lee Jones <lee.jones@linaro.org>
+Acked-by: Hayes Wang <hayeswang@realtek.com>
+Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -899,6 +899,7 @@ struct fw_header {
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * The layout of the firmware block is:
+ * <struct fw_mac> + <info> + <firmware data>.
++ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_mac + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+@@ -912,6 +913,7 @@ struct fw_header {
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
+ * @bp: break points. Depends on firmware.
++ * @reserved: reserved space (unused)
+ * @fw_ver_reg: the register to store the fw version.
+ * @fw_ver_data: the firmware version of the current type.
+ * @info: additional information for debugging, and is followed by the
+@@ -937,8 +939,10 @@ struct fw_mac {
+ /**
+ * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
+ * This is used to set patch key when loading the firmware of PHY.
++ * @blk_hdr: firmware descriptor (type, length)
+ * @key_reg: the register to write the patch key.
+ * @key_data: patch key.
++ * @reserved: reserved space (unused)
+ */
+ struct fw_phy_patch_key {
+ struct fw_block blk_hdr;
+@@ -951,6 +955,7 @@ struct fw_phy_patch_key {
+ * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
+ * The layout of the firmware block is:
+ * <struct fw_phy_nc> + <info> + <firmware data>.
++ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ * the data would be the address of struct fw_phy_nc + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+@@ -961,6 +966,7 @@ struct fw_phy_patch_key {
+ * @mode_reg: the regitster of switching the mode.
+ * @mod_pre: the mode needing to be set before loading the firmware.
+ * @mod_post: the mode to be set when finishing to load the firmware.
++ * @reserved: reserved space (unused)
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ * Depends on the firmware.
--- /dev/null
+From 5fcfa846181de6676509696c4cd7b60a22e74077 Mon Sep 17 00:00:00 2001
+From: Lee Jones <lee.jones@linaro.org>
+Date: Mon, 2 Nov 2020 11:45:09 +0000
+Subject: [PATCH] net: usb: r8152: Fix a couple of spelling errors in
+ fw_phy_nc's docs
+
+commit 9f07814d01ad085b2d9f1d55b4ce532fb2c27110 upstream.
+
+Fixes the following W=1 kernel build warning(s):
+
+ drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
+ drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
+
+Signed-off-by: Lee Jones <lee.jones@linaro.org>
+Acked-by: Hayes Wang <hayeswang@realtek.com>
+Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -964,8 +964,8 @@ struct fw_phy_patch_key {
+ * @patch_en_addr: the register of enabling patch mode. Depends on chip.
+ * @patch_en_value: patch mode enabled mask. Depends on the firmware.
+ * @mode_reg: the regitster of switching the mode.
+- * @mod_pre: the mode needing to be set before loading the firmware.
+- * @mod_post: the mode to be set when finishing to load the firmware.
++ * @mode_pre: the mode needing to be set before loading the firmware.
++ * @mode_post: the mode to be set when finishing to load the firmware.
+ * @reserved: reserved space (unused)
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
--- /dev/null
+From 0ef50460f7f053bd2a911ec53e01bfda646a5574 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Wed, 4 Nov 2020 10:19:22 +0800
+Subject: [PATCH] net/usb/r8153_ecm: support ECM mode for RTL8153
+
+commit c1aedf015ebdd0232757a66e2daccf1246bd609c upstream.
+
+Support ECM mode based on cdc_ether with relative mii functions,
+when CONFIG_USB_RTL8152 is not set, or the device is not supported
+by r8152 driver.
+
+Both r8152 and r8153_ecm would check the return value of
+rtl8152_get_version() in porbe(). If rtl8152_get_version()
+return none zero value, the r8152 is used for the device
+with vendor mode. Otherwise, the r8153_ecm is used for the
+device with ECM mode.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/Makefile | 2 +-
+ drivers/net/usb/r8152.c | 30 +------
+ drivers/net/usb/r8153_ecm.c | 162 ++++++++++++++++++++++++++++++++++++
+ include/linux/usb/r8152.h | 37 ++++++++
+ 4 files changed, 204 insertions(+), 27 deletions(-)
+ create mode 100644 drivers/net/usb/r8153_ecm.c
+ create mode 100644 include/linux/usb/r8152.h
+
+--- a/drivers/net/usb/Makefile
++++ b/drivers/net/usb/Makefile
+@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o
+ obj-$(CONFIG_USB_NET_AX8817X) += asix.o
+ asix-y := asix_devices.o asix_common.o ax88172a.o
+ obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
+-obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
++obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o
+ obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
+ obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
+ obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -27,6 +27,7 @@
+ #include <linux/acpi.h>
+ #include <linux/firmware.h>
+ #include <crypto/hash.h>
++#include <linux/usb/r8152.h>
+
+ /* Information for net-next */
+ #define NETNEXT_VERSION "11"
+@@ -654,18 +655,6 @@ enum rtl_register_content {
+
+ #define INTR_LINK 0x0004
+
+-#define RTL8152_REQT_READ 0xc0
+-#define RTL8152_REQT_WRITE 0x40
+-#define RTL8152_REQ_GET_REGS 0x05
+-#define RTL8152_REQ_SET_REGS 0x05
+-
+-#define BYTE_EN_DWORD 0xff
+-#define BYTE_EN_WORD 0x33
+-#define BYTE_EN_BYTE 0x11
+-#define BYTE_EN_SIX_BYTES 0x3f
+-#define BYTE_EN_START_MASK 0x0f
+-#define BYTE_EN_END_MASK 0xf0
+-
+ #define RTL8153_MAX_PACKET 9216 /* 9K */
+ #define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
+ ETH_FCS_LEN)
+@@ -690,21 +679,9 @@ enum rtl8152_flags {
+ LENOVO_MACPASSTHRU,
+ };
+
+-/* Define these values to match your device */
+-#define VENDOR_ID_REALTEK 0x0bda
+-#define VENDOR_ID_MICROSOFT 0x045e
+-#define VENDOR_ID_SAMSUNG 0x04e8
+-#define VENDOR_ID_LENOVO 0x17ef
+-#define VENDOR_ID_LINKSYS 0x13b1
+-#define VENDOR_ID_NVIDIA 0x0955
+-#define VENDOR_ID_TPLINK 0x2357
+-
+ #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082
+ #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2 0xa387
+
+-#define MCU_TYPE_PLA 0x0100
+-#define MCU_TYPE_USB 0x0000
+-
+ struct tally_counter {
+ __le64 tx_packets;
+ __le64 rx_packets;
+@@ -6625,7 +6602,7 @@ static int rtl_fw_init(struct r8152 *tp)
+ return 0;
+ }
+
+-static u8 rtl_get_version(struct usb_interface *intf)
++u8 rtl8152_get_version(struct usb_interface *intf)
+ {
+ struct usb_device *udev = interface_to_usbdev(intf);
+ u32 ocp_data = 0;
+@@ -6683,12 +6660,13 @@ static u8 rtl_get_version(struct usb_int
+
+ return version;
+ }
++EXPORT_SYMBOL_GPL(rtl8152_get_version);
+
+ static int rtl8152_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+ {
+ struct usb_device *udev = interface_to_usbdev(intf);
+- u8 version = rtl_get_version(intf);
++ u8 version = rtl8152_get_version(intf);
+ struct r8152 *tp;
+ struct net_device *netdev;
+ int ret;
+--- /dev/null
++++ b/drivers/net/usb/r8153_ecm.c
+@@ -0,0 +1,162 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/mii.h>
++#include <linux/usb.h>
++#include <linux/usb/cdc.h>
++#include <linux/usb/usbnet.h>
++#include <linux/usb/r8152.h>
++
++#define OCP_BASE 0xe86c
++
++static int pla_read_word(struct usbnet *dev, u16 index)
++{
++ u16 byen = BYTE_EN_WORD;
++ u8 shift = index & 2;
++ __le32 tmp;
++ int ret;
++
++ if (shift)
++ byen <<= shift;
++
++ index &= ~3;
++
++ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
++ if (ret < 0)
++ goto out;
++
++ ret = __le32_to_cpu(tmp);
++ ret >>= (shift * 8);
++ ret &= 0xffff;
++
++out:
++ return ret;
++}
++
++static int pla_write_word(struct usbnet *dev, u16 index, u32 data)
++{
++ u32 mask = 0xffff;
++ u16 byen = BYTE_EN_WORD;
++ u8 shift = index & 2;
++ __le32 tmp;
++ int ret;
++
++ data &= mask;
++
++ if (shift) {
++ byen <<= shift;
++ mask <<= (shift * 8);
++ data <<= (shift * 8);
++ }
++
++ index &= ~3;
++
++ ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
++
++ if (ret < 0)
++ goto out;
++
++ data |= __le32_to_cpu(tmp) & ~mask;
++ tmp = __cpu_to_le32(data);
++
++ ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index,
++ MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
++
++out:
++ return ret;
++}
++
++static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg)
++{
++ struct usbnet *dev = netdev_priv(netdev);
++ int ret;
++
++ ret = pla_write_word(dev, OCP_BASE, 0xa000);
++ if (ret < 0)
++ goto out;
++
++ ret = pla_read_word(dev, 0xb400 + reg * 2);
++
++out:
++ return ret;
++}
++
++static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
++{
++ struct usbnet *dev = netdev_priv(netdev);
++ int ret;
++
++ ret = pla_write_word(dev, OCP_BASE, 0xa000);
++ if (ret < 0)
++ return;
++
++ ret = pla_write_word(dev, 0xb400 + reg * 2, val);
++}
++
++static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
++{
++ int status;
++
++ status = usbnet_cdc_bind(dev, intf);
++ if (status < 0)
++ return status;
++
++ dev->mii.dev = dev->net;
++ dev->mii.mdio_read = r8153_ecm_mdio_read;
++ dev->mii.mdio_write = r8153_ecm_mdio_write;
++ dev->mii.reg_num_mask = 0x1f;
++ dev->mii.supports_gmii = 1;
++
++ return status;
++}
++
++static const struct driver_info r8153_info = {
++ .description = "RTL8153 ECM Device",
++ .flags = FLAG_ETHER,
++ .bind = r8153_bind,
++ .unbind = usbnet_cdc_unbind,
++ .status = usbnet_cdc_status,
++ .manage_power = usbnet_manage_power,
++};
++
++static const struct usb_device_id products[] = {
++{
++ USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
++ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
++ .driver_info = (unsigned long)&r8153_info,
++},
++
++ { }, /* END */
++};
++MODULE_DEVICE_TABLE(usb, products);
++
++static int rtl8153_ecm_probe(struct usb_interface *intf,
++ const struct usb_device_id *id)
++{
++#if IS_REACHABLE(CONFIG_USB_RTL8152)
++ if (rtl8152_get_version(intf))
++ return -ENODEV;
++#endif
++
++ return usbnet_probe(intf, id);
++}
++
++static struct usb_driver r8153_ecm_driver = {
++ .name = "r8153_ecm",
++ .id_table = products,
++ .probe = rtl8153_ecm_probe,
++ .disconnect = usbnet_disconnect,
++ .suspend = usbnet_suspend,
++ .resume = usbnet_resume,
++ .reset_resume = usbnet_resume,
++ .supports_autosuspend = 1,
++ .disable_hub_initiated_lpm = 1,
++};
++
++module_usb_driver(r8153_ecm_driver);
++
++MODULE_AUTHOR("Hayes Wang");
++MODULE_DESCRIPTION("Realtek USB ECM device");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/include/linux/usb/r8152.h
+@@ -0,0 +1,37 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++/*
++ * Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved.
++ */
++
++#ifndef __LINUX_R8152_H
++#define __LINUX_R8152_H
++
++#define RTL8152_REQT_READ 0xc0
++#define RTL8152_REQT_WRITE 0x40
++#define RTL8152_REQ_GET_REGS 0x05
++#define RTL8152_REQ_SET_REGS 0x05
++
++#define BYTE_EN_DWORD 0xff
++#define BYTE_EN_WORD 0x33
++#define BYTE_EN_BYTE 0x11
++#define BYTE_EN_SIX_BYTES 0x3f
++#define BYTE_EN_START_MASK 0x0f
++#define BYTE_EN_END_MASK 0xf0
++
++#define MCU_TYPE_PLA 0x0100
++#define MCU_TYPE_USB 0x0000
++
++/* Define these values to match your device */
++#define VENDOR_ID_REALTEK 0x0bda
++#define VENDOR_ID_MICROSOFT 0x045e
++#define VENDOR_ID_SAMSUNG 0x04e8
++#define VENDOR_ID_LENOVO 0x17ef
++#define VENDOR_ID_LINKSYS 0x13b1
++#define VENDOR_ID_NVIDIA 0x0955
++#define VENDOR_ID_TPLINK 0x2357
++
++#if IS_REACHABLE(CONFIG_USB_RTL8152)
++extern u8 rtl8152_get_version(struct usb_interface *intf);
++#endif
++
++#endif /* __LINUX_R8152_H */
--- /dev/null
+From 90f1afc7f96c8f7cf19c82e5f4b39e61a63b053d Mon Sep 17 00:00:00 2001
+From: Emil Renner Berthing <kernel@esmil.dk>
+Date: Sun, 31 Jan 2021 00:47:29 +0100
+Subject: [PATCH] net: usb: r8152: use new tasklet API
+
+commit f3163f1cb87141c7a41a15a5d4c98b353f807b04 upstream.
+
+This converts the driver to use the new tasklet API introduced in
+commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
+
+Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -2394,11 +2394,9 @@ static void tx_bottom(struct r8152 *tp)
+ } while (res == 0);
+ }
+
+-static void bottom_half(unsigned long data)
++static void bottom_half(struct tasklet_struct *t)
+ {
+- struct r8152 *tp;
+-
+- tp = (struct r8152 *)data;
++ struct r8152 *tp = from_tasklet(tp, t, tx_tl);
+
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+@@ -6718,7 +6716,7 @@ static int rtl8152_probe(struct usb_inte
+ mutex_init(&tp->control);
+ INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+ INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
+- tasklet_init(&tp->tx_tl, bottom_half, (unsigned long)tp);
++ tasklet_setup(&tp->tx_tl, bottom_half);
+ tasklet_disable(&tp->tx_tl);
+
+ netdev->netdev_ops = &rtl8152_netdev_ops;
--- /dev/null
+From 86b98abf4f8c691c260c5113d6a2d32f5377caca Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Wed, 3 Feb 2021 17:14:28 +0800
+Subject: [PATCH] r8152: replace several functions about phy patch
+ request
+
+commit a08c0d309d8c078d22717d815cf9853f6f2c07bd upstream.
+
+Replace r8153_patch_request() with rtl_phy_patch_request().
+Replace r8153_pre_ram_code() with rtl_pre_ram_code().
+Replace r8153_post_ram_code() with rtl_post_ram_code().
+Add rtl_patch_key_set().
+
+The new functions have an additional parameter. It is used to wait
+the patch request command finished. When the PHY is resumed from
+the state of power cut, the PHY is at a safe mode and the
+OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is
+safe to set patch request command without waiting OCP_PHY_PATCH_STAT.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 84 ++++++++++++++++++++++++-----------------
+ 1 file changed, 50 insertions(+), 34 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -3444,59 +3444,76 @@ static void rtl_clear_bp(struct r8152 *t
+ ocp_write_word(tp, type, PLA_BP_BA, 0);
+ }
+
+-static int r8153_patch_request(struct r8152 *tp, bool request)
++static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
+ {
+- u16 data;
++ u16 data, check;
+ int i;
+
+ data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
+- if (request)
++ if (request) {
+ data |= PATCH_REQUEST;
+- else
++ check = 0;
++ } else {
+ data &= ~PATCH_REQUEST;
++ check = PATCH_READY;
++ }
+ ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
+
+- for (i = 0; request && i < 5000; i++) {
++ for (i = 0; wait && i < 5000; i++) {
++ u32 ocp_data;
++
+ usleep_range(1000, 2000);
+- if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
++ ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
++ if ((ocp_data & PATCH_READY) ^ check)
+ break;
+ }
+
+- if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
+- netif_err(tp, drv, tp->netdev, "patch request fail\n");
+- r8153_patch_request(tp, false);
++ if (request && wait &&
++ !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
++ dev_err(&tp->intf->dev, "PHY patch request fail\n");
++ rtl_phy_patch_request(tp, false, false);
+ return -ETIME;
+ } else {
+ return 0;
+ }
+ }
+
+-static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key)
++static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
+ {
+- if (r8153_patch_request(tp, true)) {
+- dev_err(&tp->intf->dev, "patch request fail\n");
+- return -ETIME;
+- }
++ if (patch_key && key_addr) {
++ sram_write(tp, key_addr, patch_key);
++ sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
++ } else if (key_addr) {
++ u16 data;
+
+- sram_write(tp, key_addr, patch_key);
+- sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
++ sram_write(tp, 0x0000, 0x0000);
+
+- return 0;
++ data = ocp_reg_read(tp, OCP_PHY_LOCK);
++ data &= ~PATCH_LOCK;
++ ocp_reg_write(tp, OCP_PHY_LOCK, data);
++
++ sram_write(tp, key_addr, 0x0000);
++ } else {
++ WARN_ON_ONCE(1);
++ }
+ }
+
+-static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)
++static int
++rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
+ {
+- u16 data;
++ if (rtl_phy_patch_request(tp, true, wait))
++ return -ETIME;
+
+- sram_write(tp, 0x0000, 0x0000);
++ rtl_patch_key_set(tp, key_addr, patch_key);
+
+- data = ocp_reg_read(tp, OCP_PHY_LOCK);
+- data &= ~PATCH_LOCK;
+- ocp_reg_write(tp, OCP_PHY_LOCK, data);
++ return 0;
++}
+
+- sram_write(tp, key_addr, 0x0000);
++static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
++{
++ rtl_patch_key_set(tp, key_addr, 0);
+
+- r8153_patch_request(tp, false);
++ rtl_phy_patch_request(tp, false, wait);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+
+@@ -3981,7 +3998,7 @@ static void rtl8152_fw_mac_apply(struct
+ dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
+ }
+
+-static void rtl8152_apply_firmware(struct r8152 *tp)
++static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
+ {
+ struct rtl_fw *rtl_fw = &tp->rtl_fw;
+ const struct firmware *fw;
+@@ -4012,12 +4029,11 @@ static void rtl8152_apply_firmware(struc
+ case RTL_FW_PHY_START:
+ key = (struct fw_phy_patch_key *)block;
+ key_addr = __le16_to_cpu(key->key_reg);
+- r8153_pre_ram_code(tp, key_addr,
+- __le16_to_cpu(key->key_data));
++ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
+ break;
+ case RTL_FW_PHY_STOP:
+ WARN_ON(!key_addr);
+- r8153_post_ram_code(tp, key_addr);
++ rtl_post_ram_code(tp, key_addr, !power_cut);
+ break;
+ case RTL_FW_PHY_NC:
+ rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
+@@ -4222,7 +4238,7 @@ static void rtl8152_disable(struct r8152
+
+ static void r8152b_hw_phy_cfg(struct r8152 *tp)
+ {
+- rtl8152_apply_firmware(tp);
++ rtl8152_apply_firmware(tp, false);
+ rtl_eee_enable(tp, tp->eee_en);
+ r8152_aldps_en(tp, true);
+ r8152b_enable_fc(tp);
+@@ -4504,7 +4520,7 @@ static void r8153_hw_phy_cfg(struct r815
+ /* disable EEE before updating the PHY parameters */
+ rtl_eee_enable(tp, false);
+
+- rtl8152_apply_firmware(tp);
++ rtl8152_apply_firmware(tp, false);
+
+ if (tp->version == RTL_VER_03) {
+ data = ocp_reg_read(tp, OCP_EEE_CFG);
+@@ -4578,7 +4594,7 @@ static void r8153b_hw_phy_cfg(struct r81
+ /* disable EEE before updating the PHY parameters */
+ rtl_eee_enable(tp, false);
+
+- rtl8152_apply_firmware(tp);
++ rtl8152_apply_firmware(tp, false);
+
+ r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+@@ -4619,7 +4635,7 @@ static void r8153b_hw_phy_cfg(struct r81
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+ /* Advnace EEE */
+- if (!r8153_patch_request(tp, true)) {
++ if (!rtl_phy_patch_request(tp, true, true)) {
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data |= EEE_CLKDIV_EN;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+@@ -4636,7 +4652,7 @@ static void r8153b_hw_phy_cfg(struct r81
+ ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
+ tp->ups_info._250m_ckdiv = true;
+
+- r8153_patch_request(tp, false);
++ rtl_phy_patch_request(tp, false, true);
+ }
+
+ if (tp->eee_en)
--- /dev/null
+From 29a61d8564ad3439d03c7ec135016a4e70072af1 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Wed, 3 Feb 2021 17:14:29 +0800
+Subject: [PATCH] r8152: adjust the flow of power cut for RTL8153B
+
+commit 80fd850b31f09263ad175b2f640d5c5c6f76ed41 upstream.
+
+For runtime resuming, the RTL8153B may be resumed from the state
+of power cut, when enabling the feature of UPS. Then, the PHY
+would be reset, so it is necessary to be initailized again.
+
+Besides, the USB_U1U2_TIMER also has to be set again, so I move
+it from r8153b_init() to r8153b_hw_phy_cfg().
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 68 ++++++++++++++++++++++++-----------------
+ 1 file changed, 40 insertions(+), 28 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -1372,6 +1372,10 @@ void write_mii_word(struct net_device *n
+ static int
+ r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
+
++static int
++rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
++ u32 advertising);
++
+ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+ {
+ struct r8152 *tp = netdev_priv(netdev);
+@@ -3183,8 +3187,6 @@ static void r8153b_ups_en(struct r8152 *
+ ocp_data |= BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+ } else {
+- u16 data;
+-
+ ocp_data &= ~(UPS_EN | USP_PREWAKE);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+@@ -3192,31 +3194,20 @@ static void r8153b_ups_en(struct r8152 *
+ ocp_data &= ~BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+
+- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+- ocp_data &= ~PCUT_STATUS;
+- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
++ int i;
+
+- data = r8153_phy_status(tp, 0);
++ for (i = 0; i < 500; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++ AUTOLOAD_DONE)
++ break;
++ msleep(20);
++ }
+
+- switch (data) {
+- case PHY_STAT_PWRDN:
+- case PHY_STAT_EXT_INIT:
+- r8153b_green_en(tp,
+- test_bit(GREEN_ETHERNET, &tp->flags));
+-
+- data = r8152_mdio_read(tp, MII_BMCR);
+- data &= ~BMCR_PDOWN;
+- data |= BMCR_RESET;
+- r8152_mdio_write(tp, MII_BMCR, data);
++ tp->rtl_ops.hw_phy_cfg(tp);
+
+- data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+- fallthrough;
+-
+- default:
+- if (data != PHY_STAT_LAN_ON)
+- netif_warn(tp, link, tp->netdev,
+- "PHY not ready");
+- break;
++ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
++ tp->duplex, tp->advertising);
+ }
+ }
+ }
+@@ -4588,13 +4579,37 @@ static void r8153b_hw_phy_cfg(struct r81
+ u32 ocp_data;
+ u16 data;
+
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
++ if (ocp_data & PCUT_STATUS) {
++ ocp_data &= ~PCUT_STATUS;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
++ }
++
+ /* disable ALDPS before updating the PHY parameters */
+ r8153_aldps_en(tp, false);
+
+ /* disable EEE before updating the PHY parameters */
+ rtl_eee_enable(tp, false);
+
+- rtl8152_apply_firmware(tp, false);
++ /* U1/U2/L1 idle timer. 500 us */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
++
++ data = r8153_phy_status(tp, 0);
++
++ switch (data) {
++ case PHY_STAT_PWRDN:
++ case PHY_STAT_EXT_INIT:
++ rtl8152_apply_firmware(tp, true);
++
++ data = r8152_mdio_read(tp, MII_BMCR);
++ data &= ~BMCR_PDOWN;
++ r8152_mdio_write(tp, MII_BMCR, data);
++ break;
++ case PHY_STAT_LAN_ON:
++ default:
++ rtl8152_apply_firmware(tp, false);
++ break;
++ }
+
+ r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+@@ -5543,9 +5558,6 @@ static void r8153b_init(struct r8152 *tp
+ /* MSC timer = 0xfff * 8ms = 32760 ms */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+- /* U1/U2/L1 idle timer. 500 us */
+- ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+-
+ r8153b_power_cut_en(tp, false);
+ r8153b_ups_en(tp, false);
+ r8153_queue_wake(tp, false);
--- /dev/null
+From 69b4339c0b9f3edc6a8f681f05efaaf4add1bb0e Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 19 Feb 2021 17:04:40 +0800
+Subject: [PATCH] r8152: enable U1/U2 for USB_SPEED_SUPER
+
+commit 7a0ae61acde2cebd69665837170405eced86a6c7 upstream.
+
+U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't
+support it.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -3336,7 +3336,7 @@ static void rtl8153b_runtime_enable(stru
+ r8153b_ups_en(tp, false);
+ r8153_queue_wake(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
+- if (tp->udev->speed != USB_SPEED_HIGH)
++ if (tp->udev->speed >= USB_SPEED_SUPER)
+ r8153b_u1u2en(tp, true);
+ }
+ }
+@@ -5029,7 +5029,7 @@ static void rtl8153b_up(struct r8152 *tp
+
+ r8153_aldps_en(tp, true);
+
+- if (tp->udev->speed != USB_SPEED_HIGH)
++ if (tp->udev->speed >= USB_SPEED_SUPER)
+ r8153b_u1u2en(tp, true);
+ }
+
+@@ -5571,8 +5571,9 @@ static void r8153b_init(struct r8152 *tp
+ ocp_data |= POLL_LINK_CHG;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+- if (tp->udev->speed != USB_SPEED_HIGH)
++ if (tp->udev->speed >= USB_SPEED_SUPER)
+ r8153b_u1u2en(tp, true);
++
+ usb_enable_lpm(tp->udev);
+
+ /* MAC clock speed down */
--- /dev/null
+From e78b75f5be204a0a235da995d01c778dc282bb42 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 19 Feb 2021 17:04:41 +0800
+Subject: [PATCH] r8152: check if the pointer of the function exists
+
+commit c79515e47935c747282c6ed2ee5b2ef039756eeb upstream.
+
+Return error code if autosuspend_en, eee_get, or eee_set don't exist.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -5758,6 +5758,9 @@ static int rtl8152_runtime_suspend(struc
+ struct net_device *netdev = tp->netdev;
+ int ret = 0;
+
++ if (!tp->rtl_ops.autosuspend_en)
++ return -EBUSY;
++
+ set_bit(SELECTIVE_SUSPEND, &tp->flags);
+ smp_mb__after_atomic();
+
+@@ -6157,6 +6160,11 @@ rtl_ethtool_get_eee(struct net_device *n
+ struct r8152 *tp = netdev_priv(net);
+ int ret;
+
++ if (!tp->rtl_ops.eee_get) {
++ ret = -EOPNOTSUPP;
++ goto out;
++ }
++
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
+@@ -6179,6 +6187,11 @@ rtl_ethtool_set_eee(struct net_device *n
+ struct r8152 *tp = netdev_priv(net);
+ int ret;
+
++ if (!tp->rtl_ops.eee_set) {
++ ret = -EOPNOTSUPP;
++ goto out;
++ }
++
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
--- /dev/null
+From 38e44c7926512cff0b2809dc329de2a8e769e523 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 19 Feb 2021 17:04:42 +0800
+Subject: [PATCH] r8152: replace netif_err with dev_err
+
+commit 156c3207611262266f0eea589ac3f00c5657320e upstream.
+
+Some messages are before calling register_netdev(), so replace
+netif_err() with dev_err().
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -6594,7 +6594,7 @@ static int rtl_ops_init(struct r8152 *tp
+
+ default:
+ ret = -ENODEV;
+- netif_err(tp, probe, tp->netdev, "Unknown Device\n");
++ dev_err(&tp->intf->dev, "Unknown Device\n");
+ break;
+ }
+
+@@ -6851,7 +6851,7 @@ static int rtl8152_probe(struct usb_inte
+
+ ret = register_netdev(netdev);
+ if (ret != 0) {
+- netif_err(tp, probe, netdev, "couldn't register the device\n");
++ dev_err(&intf->dev, "couldn't register the device\n");
+ goto out1;
+ }
+
--- /dev/null
+From 260814de2d6cb958767785ffcb2e76915d1be32b Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 19 Feb 2021 17:04:43 +0800
+Subject: [PATCH] r8152: spilt rtl_set_eee_plus and r8153b_green_en
+
+commit 40fa7568ac230446d888b7ad402cff9e20fe3ad5 upstream.
+
+Add rtl_eee_plus_en() and rtl_green_en().
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++---------------
+ 1 file changed, 27 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -2633,21 +2633,24 @@ static inline u8 rtl8152_get_speed(struc
+ return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+ }
+
+-static void rtl_set_eee_plus(struct r8152 *tp)
++static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
+ {
+ u32 ocp_data;
+- u8 speed;
+
+- speed = rtl8152_get_speed(tp);
+- if (speed & _10bps) {
+- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
++ if (enable)
+ ocp_data |= EEEP_CR_EEEP_TX;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+- } else {
+- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
++ else
+ ocp_data &= ~EEEP_CR_EEEP_TX;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+- }
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
++}
++
++static void rtl_set_eee_plus(struct r8152 *tp)
++{
++ if (rtl8152_get_speed(tp) & _10bps)
++ rtl_eee_plus_en(tp, true);
++ else
++ rtl_eee_plus_en(tp, false);
+ }
+
+ static void rxdy_gated_en(struct r8152 *tp, bool enable)
+@@ -3128,10 +3131,22 @@ static void r8153b_ups_flags(struct r815
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
+ }
+
+-static void r8153b_green_en(struct r8152 *tp, bool enable)
++static void rtl_green_en(struct r8152 *tp, bool enable)
+ {
+ u16 data;
+
++ data = sram_read(tp, SRAM_GREEN_CFG);
++ if (enable)
++ data |= GREEN_ETH_EN;
++ else
++ data &= ~GREEN_ETH_EN;
++ sram_write(tp, SRAM_GREEN_CFG, data);
++
++ tp->ups_info.green = enable;
++}
++
++static void r8153b_green_en(struct r8152 *tp, bool enable)
++{
+ if (enable) {
+ sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */
+ sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
+@@ -3142,11 +3157,7 @@ static void r8153b_green_en(struct r8152
+ sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
+ }
+
+- data = sram_read(tp, SRAM_GREEN_CFG);
+- data |= GREEN_ETH_EN;
+- sram_write(tp, SRAM_GREEN_CFG, data);
+-
+- tp->ups_info.green = enable;
++ rtl_green_en(tp, true);
+ }
+
+ static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
--- /dev/null
+From f1bbbb260a8016373adf239c716d2da90e6ced0b Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:32 +0800
+Subject: [PATCH] r8152: set inter fram gap time depending on speed
+
+commit 5133bcc7481528e36fff0a3b056601efb704fb32 upstream.
+
+Set the maximum inter frame gap time (144ns) for speed 10M/half and
+100M/half. It improves the performance for those speeds. And, there
+is no effect for the other speeds.
+
+For 10M/half and 100M/half, the fast inter frame gap time let the
+device couldn't use the feature of the aggregation effectively,
+because the transfer would be completed fastly. Therefore, use the
+maximum value to improve the effect of the aggregation. However, you
+may not feel the improvement for fast CPUs, because they compensate
+for the effect of the aggregation.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -250,6 +250,9 @@
+
+ /* PLA_TCR1 */
+ #define VERSION_MASK 0x7cf0
++#define IFG_MASK (BIT(3) | BIT(9) | BIT(8))
++#define IFG_144NS BIT(9)
++#define IFG_96NS (BIT(9) | BIT(8))
+
+ /* PLA_MTPS */
+ #define MTPS_JUMBO (12 * 1024 / 64)
+@@ -2748,6 +2751,29 @@ static int rtl_stop_rx(struct r8152 *tp)
+ return 0;
+ }
+
++static void rtl_set_ifg(struct r8152 *tp, u16 speed)
++{
++ u32 ocp_data;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
++ ocp_data &= ~IFG_MASK;
++ if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
++ ocp_data |= IFG_144NS;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ ocp_data &= ~TX10MIDLE_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++ } else {
++ ocp_data |= IFG_96NS;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ ocp_data |= TX10MIDLE_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++ }
++}
++
+ static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
+ {
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
+@@ -2851,6 +2877,8 @@ static int rtl8153_enable(struct r8152 *
+ r8153_set_rx_early_timeout(tp);
+ r8153_set_rx_early_size(tp);
+
++ rtl_set_ifg(tp, rtl8152_get_speed(tp));
++
+ if (tp->version == RTL_VER_09) {
+ u32 ocp_data;
+
--- /dev/null
+From f10c9edf47d3fa240d965e151a48c670f5035b73 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:33 +0800
+Subject: [PATCH] r8152: adjust rtl8152_check_firmware function
+
+commit a8a7be178e81a3d4b6972cbeb0ccd091ca2f9f89 upstream.
+
+Use bits operations to record and check the firmware.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 51 +++++++++++++++++++++++------------------
+ 1 file changed, 29 insertions(+), 22 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -875,6 +875,14 @@ struct fw_header {
+ struct fw_block blocks[];
+ } __packed;
+
++enum rtl8152_fw_flags {
++ FW_FLAGS_USB = 0,
++ FW_FLAGS_PLA,
++ FW_FLAGS_START,
++ FW_FLAGS_STOP,
++ FW_FLAGS_NC,
++};
++
+ /**
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * The layout of the firmware block is:
+@@ -3801,10 +3809,7 @@ static long rtl8152_check_firmware(struc
+ {
+ const struct firmware *fw = rtl_fw->fw;
+ struct fw_header *fw_hdr = (struct fw_header *)fw->data;
+- struct fw_mac *pla = NULL, *usb = NULL;
+- struct fw_phy_patch_key *start = NULL;
+- struct fw_phy_nc *phy_nc = NULL;
+- struct fw_block *stop = NULL;
++ unsigned long fw_flags = 0;
+ long ret = -EFAULT;
+ int i;
+
+@@ -3833,50 +3838,52 @@ static long rtl8152_check_firmware(struc
+ goto fail;
+ goto fw_end;
+ case RTL_FW_PLA:
+- if (pla) {
++ if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple PLA firmware encountered");
+ goto fail;
+ }
+
+- pla = (struct fw_mac *)block;
+- if (!rtl8152_is_fw_mac_ok(tp, pla)) {
++ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+ dev_err(&tp->intf->dev,
+ "check PLA firmware failed\n");
+ goto fail;
+ }
++ __set_bit(FW_FLAGS_PLA, &fw_flags);
+ break;
+ case RTL_FW_USB:
+- if (usb) {
++ if (test_bit(FW_FLAGS_USB, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple USB firmware encountered");
+ goto fail;
+ }
+
+- usb = (struct fw_mac *)block;
+- if (!rtl8152_is_fw_mac_ok(tp, usb)) {
++ if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+ dev_err(&tp->intf->dev,
+ "check USB firmware failed\n");
+ goto fail;
+ }
++ __set_bit(FW_FLAGS_USB, &fw_flags);
+ break;
+ case RTL_FW_PHY_START:
+- if (start || phy_nc || stop) {
++ if (test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_NC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "check PHY_START fail\n");
+ goto fail;
+ }
+
+- if (__le32_to_cpu(block->length) != sizeof(*start)) {
++ if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
+ dev_err(&tp->intf->dev,
+ "Invalid length for PHY_START\n");
+ goto fail;
+ }
+-
+- start = (struct fw_phy_patch_key *)block;
++ __set_bit(FW_FLAGS_START, &fw_flags);
+ break;
+ case RTL_FW_PHY_STOP:
+- if (stop || !start) {
++ if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
++ !test_bit(FW_FLAGS_START, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "Check PHY_STOP fail\n");
+ goto fail;
+@@ -3887,28 +3894,28 @@ static long rtl8152_check_firmware(struc
+ "Invalid length for PHY_STOP\n");
+ goto fail;
+ }
+-
+- stop = block;
++ __set_bit(FW_FLAGS_STOP, &fw_flags);
+ break;
+ case RTL_FW_PHY_NC:
+- if (!start || stop) {
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "check PHY_NC fail\n");
+ goto fail;
+ }
+
+- if (phy_nc) {
++ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "multiple PHY NC encountered\n");
+ goto fail;
+ }
+
+- phy_nc = (struct fw_phy_nc *)block;
+- if (!rtl8152_is_fw_phy_nc_ok(tp, phy_nc)) {
++ if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
+ dev_err(&tp->intf->dev,
+ "check PHY NC firmware failed\n");
+ goto fail;
+ }
++ __set_bit(FW_FLAGS_NC, &fw_flags);
+
+ break;
+ default:
+@@ -3922,7 +3929,7 @@ static long rtl8152_check_firmware(struc
+ }
+
+ fw_end:
+- if ((phy_nc || start) && !stop) {
++ if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev, "without PHY_STOP\n");
+ goto fail;
+ }
--- /dev/null
+From f010a7d51cbb42bdb956f0a28b8868b15d7a3816 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:34 +0800
+Subject: [PATCH] r8152: add help function to change mtu
+
+commit 67ce1a806f164e59a074fea8809725d3411eaa20 upstream.
+
+The different chips may have different requests when changing mtu.
+Therefore, add a new help function of rtl_ops to change mtu. Besides,
+reset the tx/rx after changing mtu.
+
+Additionally, add mtu_to_size() and size_to_mtu() macros to simplify
+the code.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 53 ++++++++++++++++++++++++-----------------
+ 1 file changed, 31 insertions(+), 22 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -658,15 +658,13 @@ enum rtl_register_content {
+
+ #define INTR_LINK 0x0004
+
+-#define RTL8153_MAX_PACKET 9216 /* 9K */
+-#define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \
+- ETH_FCS_LEN)
+ #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+ #define RTL8153_RMS RTL8153_MAX_PACKET
+ #define RTL8152_TX_TIMEOUT (5 * HZ)
+ #define RTL8152_NAPI_WEIGHT 64
+-#define rx_reserved_size(x) ((x) + VLAN_ETH_HLEN + ETH_FCS_LEN + \
+- sizeof(struct rx_desc) + RX_ALIGN)
++#define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
++#define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
++#define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
+
+ /* rtl8152 flags */
+ enum rtl8152_flags {
+@@ -796,6 +794,7 @@ struct r8152 {
+ bool (*in_nway)(struct r8152 *tp);
+ void (*hw_phy_cfg)(struct r8152 *tp);
+ void (*autosuspend_en)(struct r8152 *tp, bool enable);
++ void (*change_mtu)(struct r8152 *tp);
+ } rtl_ops;
+
+ struct ups_info {
+@@ -1022,8 +1021,7 @@ enum tx_csum_stat {
+ static const int multicast_filter_limit = 32;
+ static unsigned int agg_buf_sz = 16384;
+
+-#define RTL_LIMITED_TSO_SIZE (agg_buf_sz - sizeof(struct tx_desc) - \
+- VLAN_ETH_HLEN - ETH_FCS_LEN)
++#define RTL_LIMITED_TSO_SIZE (size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
+
+ static
+ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+@@ -2633,10 +2631,7 @@ static void rtl8152_nic_reset(struct r81
+
+ static void set_tx_qlen(struct r8152 *tp)
+ {
+- struct net_device *netdev = tp->netdev;
+-
+- tp->tx_qlen = agg_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
+- sizeof(struct tx_desc));
++ tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
+ }
+
+ static inline u8 rtl8152_get_speed(struct r8152 *tp)
+@@ -4725,6 +4720,12 @@ static void r8153b_hw_phy_cfg(struct r81
+ set_bit(PHY_RESET, &tp->flags);
+ }
+
++static void rtl8153_change_mtu(struct r8152 *tp)
++{
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
++}
++
+ static void r8153_first_init(struct r8152 *tp)
+ {
+ u32 ocp_data;
+@@ -4757,9 +4758,7 @@ static void r8153_first_init(struct r815
+
+ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
+
+- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
+- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
++ rtl8153_change_mtu(tp);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+ ocp_data |= TCR0_AUTO_FIFO;
+@@ -4794,8 +4793,7 @@ static void r8153_enter_oob(struct r8152
+
+ wait_oob_link_list_ready(tp);
+
+- ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
+
+ switch (tp->version) {
+ case RTL_VER_03:
+@@ -6518,12 +6516,21 @@ static int rtl8152_change_mtu(struct net
+ dev->mtu = new_mtu;
+
+ if (netif_running(dev)) {
+- u32 rms = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+-
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms);
++ if (tp->rtl_ops.change_mtu)
++ tp->rtl_ops.change_mtu(tp);
+
+- if (netif_carrier_ok(dev))
+- r8153_set_rx_early_size(tp);
++ if (netif_carrier_ok(dev)) {
++ netif_stop_queue(dev);
++ napi_disable(&tp->napi);
++ tasklet_disable(&tp->tx_tl);
++ tp->rtl_ops.disable(tp);
++ tp->rtl_ops.enable(tp);
++ rtl_start_rx(tp);
++ tasklet_enable(&tp->tx_tl);
++ napi_enable(&tp->napi);
++ rtl8152_set_rx_mode(dev);
++ netif_wake_queue(dev);
++ }
+ }
+
+ mutex_unlock(&tp->control);
+@@ -6612,6 +6619,7 @@ static int rtl_ops_init(struct r8152 *tp
+ ops->in_nway = rtl8153_in_nway;
+ ops->hw_phy_cfg = r8153_hw_phy_cfg;
+ ops->autosuspend_en = rtl8153_runtime_enable;
++ ops->change_mtu = rtl8153_change_mtu;
+ if (tp->udev->speed < USB_SPEED_SUPER)
+ tp->rx_buf_sz = 16 * 1024;
+ else
+@@ -6633,6 +6641,7 @@ static int rtl_ops_init(struct r8152 *tp
+ ops->in_nway = rtl8153_in_nway;
+ ops->hw_phy_cfg = r8153b_hw_phy_cfg;
+ ops->autosuspend_en = rtl8153b_runtime_enable;
++ ops->change_mtu = rtl8153_change_mtu;
+ tp->rx_buf_sz = 32 * 1024;
+ tp->eee_en = true;
+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
+@@ -6853,7 +6862,7 @@ static int rtl8152_probe(struct usb_inte
+ netdev->max_mtu = ETH_DATA_LEN;
+ break;
+ default:
+- netdev->max_mtu = RTL8153_MAX_MTU;
++ netdev->max_mtu = size_to_mtu(9 * 1024);
+ break;
+ }
+
--- /dev/null
+From e7439e7fd384f55f55837f7e4866e74d8dca3827 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:35 +0800
+Subject: [PATCH] r8152: support new chips
+
+commit 195aae321c829dd1945900d75561e6aa79cce208 upstream.
+
+Support RTL8153C, RTL8153D, RTL8156A, and RTL8156B. The RTL8156A
+and RTL8156B are the 2.5G ethernet.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 2634 +++++++++++++++++++++++++++++++++++----
+ 1 file changed, 2359 insertions(+), 275 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -44,10 +44,14 @@
+
+ #define PLA_IDR 0xc000
+ #define PLA_RCR 0xc010
++#define PLA_RCR1 0xc012
+ #define PLA_RMS 0xc016
+ #define PLA_RXFIFO_CTRL0 0xc0a0
++#define PLA_RXFIFO_FULL 0xc0a2
+ #define PLA_RXFIFO_CTRL1 0xc0a4
++#define PLA_RX_FIFO_FULL 0xc0a6
+ #define PLA_RXFIFO_CTRL2 0xc0a8
++#define PLA_RX_FIFO_EMPTY 0xc0aa
+ #define PLA_DMY_REG0 0xc0b0
+ #define PLA_FMC 0xc0b4
+ #define PLA_CFG_WOL 0xc0b6
+@@ -64,6 +68,8 @@
+ #define PLA_MACDBG_PRE 0xd38c /* RTL_VER_04 only */
+ #define PLA_MACDBG_POST 0xd38e /* RTL_VER_04 only */
+ #define PLA_EXTRA_STATUS 0xd398
++#define PLA_GPHY_CTRL 0xd3ae
++#define PLA_POL_GPIO_CTRL 0xdc6a
+ #define PLA_EFUSE_DATA 0xdd00
+ #define PLA_EFUSE_CMD 0xdd02
+ #define PLA_LEDSEL 0xdd90
+@@ -73,6 +79,8 @@
+ #define PLA_LWAKE_CTRL_REG 0xe007
+ #define PLA_GPHY_INTR_IMR 0xe022
+ #define PLA_EEE_CR 0xe040
++#define PLA_EEE_TXTWSYS 0xe04c
++#define PLA_EEE_TXTWSYS_2P5G 0xe058
+ #define PLA_EEEP_CR 0xe080
+ #define PLA_MAC_PWR_CTRL 0xe0c0
+ #define PLA_MAC_PWR_CTRL2 0xe0ca
+@@ -83,6 +91,7 @@
+ #define PLA_TCR1 0xe612
+ #define PLA_MTPS 0xe615
+ #define PLA_TXFIFO_CTRL 0xe618
++#define PLA_TXFIFO_FULL 0xe61a
+ #define PLA_RSTTALLY 0xe800
+ #define PLA_CR 0xe813
+ #define PLA_CRWECR 0xe81c
+@@ -99,6 +108,7 @@
+ #define PLA_SFF_STS_7 0xe8de
+ #define PLA_PHYSTATUS 0xe908
+ #define PLA_CONFIG6 0xe90a /* CONFIG6 */
++#define PLA_USB_CFG 0xe952
+ #define PLA_BP_BA 0xfc26
+ #define PLA_BP_0 0xfc28
+ #define PLA_BP_1 0xfc2a
+@@ -113,6 +123,7 @@
+ #define USB_USB2PHY 0xb41e
+ #define USB_SSPHYLINK1 0xb426
+ #define USB_SSPHYLINK2 0xb428
++#define USB_L1_CTRL 0xb45e
+ #define USB_U2P3_CTRL 0xb460
+ #define USB_CSR_DUMMY1 0xb464
+ #define USB_CSR_DUMMY2 0xb466
+@@ -123,7 +134,12 @@
+ #define USB_FW_FIX_EN0 0xcfca
+ #define USB_FW_FIX_EN1 0xcfcc
+ #define USB_LPM_CONFIG 0xcfd8
++#define USB_ECM_OPTION 0xcfee
+ #define USB_CSTMR 0xcfef /* RTL8153A */
++#define USB_MISC_2 0xcfff
++#define USB_ECM_OP 0xd26b
++#define USB_GPHY_CTRL 0xd284
++#define USB_SPEED_OPTION 0xd32a
+ #define USB_FW_CTRL 0xd334 /* RTL8153B */
+ #define USB_FC_TIMER 0xd340
+ #define USB_USB_CTRL 0xd406
+@@ -137,16 +153,20 @@
+ #define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
+ #define USB_TX_DMA 0xd434
+ #define USB_UPT_RXDMA_OWN 0xd437
++#define USB_UPHY3_MDCMDIO 0xd480
+ #define USB_TOLERANCE 0xd490
+ #define USB_LPM_CTRL 0xd41a
+ #define USB_BMU_RESET 0xd4b0
++#define USB_BMU_CONFIG 0xd4b4
+ #define USB_U1U2_TIMER 0xd4da
+ #define USB_FW_TASK 0xd4e8 /* RTL8153B */
++#define USB_RX_AGGR_NUM 0xd4ee
+ #define USB_UPS_CTRL 0xd800
+ #define USB_POWER_CUT 0xd80a
+ #define USB_MISC_0 0xd81a
+ #define USB_MISC_1 0xd81f
+ #define USB_AFE_CTRL2 0xd824
++#define USB_UPHY_XTAL 0xd826
+ #define USB_UPS_CFG 0xd842
+ #define USB_UPS_FLAGS 0xd848
+ #define USB_WDT1_CTRL 0xe404
+@@ -189,6 +209,9 @@
+ #define OCP_EEE_ABLE 0xa5c4
+ #define OCP_EEE_ADV 0xa5d0
+ #define OCP_EEE_LPABLE 0xa5d2
++#define OCP_10GBT_CTRL 0xa5d4
++#define OCP_10GBT_STAT 0xa5d6
++#define OCP_EEE_ADV2 0xa6d4
+ #define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
+ #define OCP_PHY_PATCH_STAT 0xb800
+ #define OCP_PHY_PATCH_CMD 0xb820
+@@ -200,6 +223,7 @@
+ /* SRAM Register */
+ #define SRAM_GREEN_CFG 0x8011
+ #define SRAM_LPF_CFG 0x8012
++#define SRAM_GPHY_FW_VER 0x801e
+ #define SRAM_10M_AMP1 0x8080
+ #define SRAM_10M_AMP2 0x8082
+ #define SRAM_IMPEDANCE 0x8084
+@@ -211,11 +235,19 @@
+ #define RCR_AM 0x00000004
+ #define RCR_AB 0x00000008
+ #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
++#define SLOT_EN BIT(11)
++
++/* PLA_RCR1 */
++#define OUTER_VLAN BIT(7)
++#define INNER_VLAN BIT(6)
+
+ /* PLA_RXFIFO_CTRL0 */
+ #define RXFIFO_THR1_NORMAL 0x00080002
+ #define RXFIFO_THR1_OOB 0x01800003
+
++/* PLA_RXFIFO_FULL */
++#define RXFIFO_FULL_MASK 0xfff
++
+ /* PLA_RXFIFO_CTRL1 */
+ #define RXFIFO_THR2_FULL 0x00000060
+ #define RXFIFO_THR2_HIGH 0x00000038
+@@ -286,6 +318,7 @@
+ #define MCU_BORW_EN 0x4000
+
+ /* PLA_CPCR */
++#define FLOW_CTRL_EN BIT(0)
+ #define CPCR_RX_VLAN 0x0040
+
+ /* PLA_CFG_WOL */
+@@ -311,6 +344,10 @@
+ /* PLA_CONFIG6 */
+ #define LANWAKE_CLR_EN BIT(0)
+
++/* PLA_USB_CFG */
++#define EN_XG_LIP BIT(1)
++#define EN_G_LIP BIT(2)
++
+ /* PLA_CONFIG5 */
+ #define BWF_EN 0x0040
+ #define MWF_EN 0x0020
+@@ -334,6 +371,7 @@
+ /* PLA_MAC_PWR_CTRL2 */
+ #define EEE_SPDWN_RATIO 0x8007
+ #define MAC_CLK_SPDWN_EN BIT(15)
++#define EEE_SPDWN_RATIO_MASK 0xff
+
+ /* PLA_MAC_PWR_CTRL3 */
+ #define PLA_MCU_SPDWN_EN BIT(14)
+@@ -346,6 +384,7 @@
+ #define PWRSAVE_SPDWN_EN 0x1000
+ #define RXDV_SPDWN_EN 0x0800
+ #define TX10MIDLE_EN 0x0100
++#define IDLE_SPDWN_EN BIT(6)
+ #define TP100_SPDWN_EN 0x0020
+ #define TP500_SPDWN_EN 0x0010
+ #define TP1000_SPDWN_EN 0x0008
+@@ -386,6 +425,13 @@
+ #define LINK_CHANGE_FLAG BIT(8)
+ #define POLL_LINK_CHG BIT(0)
+
++/* PLA_GPHY_CTRL */
++#define GPHY_FLASH BIT(1)
++
++/* PLA_POL_GPIO_CTRL */
++#define DACK_DET_EN BIT(15)
++#define POL_GPHY_PATCH BIT(4)
++
+ /* USB_USB2PHY */
+ #define USB2PHY_SUSPEND 0x0001
+ #define USB2PHY_L1 0x0002
+@@ -434,6 +480,9 @@
+ #define BMU_RESET_EP_IN 0x01
+ #define BMU_RESET_EP_OUT 0x02
+
++/* USB_BMU_CONFIG */
++#define ACT_ODMA BIT(1)
++
+ /* USB_UPT_RXDMA_OWN */
+ #define OWN_UPDATE BIT(0)
+ #define OWN_CLEAR BIT(1)
+@@ -441,27 +490,52 @@
+ /* USB_FW_TASK */
+ #define FC_PATCH_TASK BIT(1)
+
++/* USB_RX_AGGR_NUM */
++#define RX_AGGR_NUM_MASK 0x1ff
++
+ /* USB_UPS_CTRL */
+ #define POWER_CUT 0x0100
+
+ /* USB_PM_CTRL_STATUS */
+ #define RESUME_INDICATE 0x0001
+
++/* USB_ECM_OPTION */
++#define BYPASS_MAC_RESET BIT(5)
++
+ /* USB_CSTMR */
+ #define FORCE_SUPER BIT(0)
+
++/* USB_MISC_2 */
++#define UPS_FORCE_PWR_DOWN BIT(0)
++
++/* USB_ECM_OP */
++#define EN_ALL_SPEED BIT(0)
++
++/* USB_GPHY_CTRL */
++#define GPHY_PATCH_DONE BIT(2)
++#define BYPASS_FLASH BIT(5)
++#define BACKUP_RESTRORE BIT(6)
++
++/* USB_SPEED_OPTION */
++#define RG_PWRDN_EN BIT(8)
++#define ALL_SPEED_OFF BIT(9)
++
+ /* USB_FW_CTRL */
+ #define FLOW_CTRL_PATCH_OPT BIT(1)
++#define AUTO_SPEEDUP BIT(3)
++#define FLOW_CTRL_PATCH_2 BIT(8)
+
+ /* USB_FC_TIMER */
+ #define CTRL_TIMER_EN BIT(15)
+
+ /* USB_USB_CTRL */
++#define CDC_ECM_EN BIT(3)
+ #define RX_AGG_DISABLE 0x0010
+ #define RX_ZERO_EN 0x0080
+
+ /* USB_U2P3_CTRL */
+ #define U2P3_ENABLE 0x0001
++#define RX_DETECT8 BIT(3)
+
+ /* USB_POWER_CUT */
+ #define PWR_EN 0x0001
+@@ -497,8 +571,12 @@
+ #define SEN_VAL_NORMAL 0xa000
+ #define SEL_RXIDLE 0x0100
+
++/* USB_UPHY_XTAL */
++#define OOBS_POLLING BIT(8)
++
+ /* USB_UPS_CFG */
+ #define SAW_CNT_1MS_MASK 0x0fff
++#define MID_REVERSE BIT(5) /* RTL8156A */
+
+ /* USB_UPS_FLAGS */
+ #define UPS_FLAGS_R_TUNE BIT(0)
+@@ -506,6 +584,7 @@
+ #define UPS_FLAGS_250M_CKDIV BIT(2)
+ #define UPS_FLAGS_EN_ALDPS BIT(3)
+ #define UPS_FLAGS_CTAP_SHORT_DIS BIT(4)
++#define UPS_FLAGS_SPEED_MASK (0xf << 16)
+ #define ups_flags_speed(x) ((x) << 16)
+ #define UPS_FLAGS_EN_EEE BIT(20)
+ #define UPS_FLAGS_EN_500M_EEE BIT(21)
+@@ -526,6 +605,8 @@ enum spd_duplex {
+ FORCE_10M_FULL,
+ FORCE_100M_HALF,
+ FORCE_100M_FULL,
++ FORCE_1000M_FULL,
++ NWAY_2500M_FULL,
+ };
+
+ /* OCP_ALDPS_CONFIG */
+@@ -590,6 +671,9 @@ enum spd_duplex {
+ #define EN_10M_CLKDIV BIT(11)
+ #define EN_10M_BGOFF 0x0080
+
++/* OCP_10GBT_CTRL */
++#define RTL_ADV2_5G_F_R BIT(5) /* Advertise 2.5GBASE-T fast-retrain */
++
+ /* OCP_PHY_STATE */
+ #define TXDIS_STATE 0x01
+ #define ABD_STATE 0x02
+@@ -609,7 +693,8 @@ enum spd_duplex {
+ #define EN_EMI_L 0x0040
+
+ /* OCP_SYSCLK_CFG */
+-#define clk_div_expo(x) (min(x, 5) << 8)
++#define sysclk_div_expo(x) (min(x, 5) << 8)
++#define clk_div_expo(x) (min(x, 5) << 4)
+
+ /* SRAM_GREEN_CFG */
+ #define GREEN_ETH_EN BIT(15)
+@@ -640,6 +725,11 @@ enum spd_duplex {
+ #define BP4_SUPER_ONLY 0x1578 /* RTL_VER_04 only */
+
+ enum rtl_register_content {
++ _2500bps = BIT(10),
++ _1250bps = BIT(9),
++ _500bps = BIT(8),
++ _tx_flow = BIT(6),
++ _rx_flow = BIT(5),
+ _1000bps = 0x10,
+ _100bps = 0x08,
+ _10bps = 0x04,
+@@ -647,6 +737,9 @@ enum rtl_register_content {
+ FULL_DUP = 0x01,
+ };
+
++#define is_speed_2500(_speed) (((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
++#define is_flow_control(_speed) (((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
++
+ #define RTL8152_MAX_TX 4
+ #define RTL8152_MAX_RX 10
+ #define INTBUFSIZE 2
+@@ -661,7 +754,6 @@ enum rtl_register_content {
+ #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+ #define RTL8153_RMS RTL8153_MAX_PACKET
+ #define RTL8152_TX_TIMEOUT (5 * HZ)
+-#define RTL8152_NAPI_WEIGHT 64
+ #define mtu_to_size(m) ((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
+ #define size_to_mtu(s) ((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
+ #define rx_reserved_size(x) (mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
+@@ -798,6 +890,7 @@ struct r8152 {
+ } rtl_ops;
+
+ struct ups_info {
++ u32 r_tune:1;
+ u32 _10m_ckdiv:1;
+ u32 _250m_ckdiv:1;
+ u32 aldps:1;
+@@ -839,7 +932,9 @@ struct r8152 {
+ u32 rx_buf_sz;
+ u32 rx_copybreak;
+ u32 rx_pending;
++ u32 fc_pause_on, fc_pause_off;
+
++ u32 support_2500full:1;
+ u16 ocp_base;
+ u16 speed;
+ u16 eee_adv;
+@@ -999,6 +1094,15 @@ enum rtl_version {
+ RTL_VER_07,
+ RTL_VER_08,
+ RTL_VER_09,
++
++ RTL_TEST_01,
++ RTL_VER_10,
++ RTL_VER_11,
++ RTL_VER_12,
++ RTL_VER_13,
++ RTL_VER_14,
++ RTL_VER_15,
++
+ RTL_VER_MAX
+ };
+
+@@ -1014,6 +1118,7 @@ enum tx_csum_stat {
+ #define RTL_ADVERTISED_100_FULL BIT(3)
+ #define RTL_ADVERTISED_1000_HALF BIT(4)
+ #define RTL_ADVERTISED_1000_FULL BIT(5)
++#define RTL_ADVERTISED_2500_FULL BIT(6)
+
+ /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
+@@ -2607,7 +2712,7 @@ static netdev_tx_t rtl8152_start_xmit(st
+
+ static void r8152b_reset_packet_filter(struct r8152 *tp)
+ {
+- u32 ocp_data;
++ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+ ocp_data &= ~FMC_FCR_MCU_EN;
+@@ -2618,14 +2723,47 @@ static void r8152b_reset_packet_filter(s
+
+ static void rtl8152_nic_reset(struct r8152 *tp)
+ {
+- int i;
++ u32 ocp_data;
++ int i;
+
+- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
++ switch (tp->version) {
++ case RTL_TEST_01:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
++ ocp_data &= ~CR_TE;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
++ ocp_data &= ~BMU_RESET_EP_IN;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++ ocp_data |= CDC_ECM_EN;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
++ ocp_data &= ~CR_RE;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
++ ocp_data |= BMU_RESET_EP_IN;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++ ocp_data &= ~CDC_ECM_EN;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++ break;
+
+- for (i = 0; i < 1000; i++) {
+- if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+- break;
+- usleep_range(100, 400);
++ default:
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
++
++ for (i = 0; i < 1000; i++) {
++ if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
++ break;
++ usleep_range(100, 400);
++ }
++ break;
+ }
+ }
+
+@@ -2634,9 +2772,9 @@ static void set_tx_qlen(struct r8152 *tp
+ tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
+ }
+
+-static inline u8 rtl8152_get_speed(struct r8152 *tp)
++static inline u16 rtl8152_get_speed(struct r8152 *tp)
+ {
+- return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
++ return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+ }
+
+ static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
+@@ -2796,6 +2934,7 @@ static int rtl_enable(struct r8152 *tp)
+ switch (tp->version) {
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_14:
+ r8153b_rx_agg_chg_indicate(tp);
+ break;
+ default:
+@@ -2833,6 +2972,7 @@ static void r8153_set_rx_early_timeout(s
+
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_14:
+ /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
+ * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
+ */
+@@ -2842,6 +2982,18 @@ static void r8153_set_rx_early_timeout(s
+ ocp_data);
+ break;
+
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
++ 640 / 8);
++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
++ ocp_data);
++ r8153b_rx_agg_chg_indicate(tp);
++ break;
++
+ default:
+ break;
+ }
+@@ -2861,8 +3013,19 @@ static void r8153_set_rx_early_size(stru
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_14:
++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
++ ocp_data / 8);
++ break;
++ case RTL_TEST_01:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+ ocp_data / 8);
++ r8153b_rx_agg_chg_indicate(tp);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+@@ -2872,6 +3035,8 @@ static void r8153_set_rx_early_size(stru
+
+ static int rtl8153_enable(struct r8152 *tp)
+ {
++ u32 ocp_data;
++
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return -ENODEV;
+
+@@ -2882,15 +3047,18 @@ static int rtl8153_enable(struct r8152 *
+
+ rtl_set_ifg(tp, rtl8152_get_speed(tp));
+
+- if (tp->version == RTL_VER_09) {
+- u32 ocp_data;
+-
++ switch (tp->version) {
++ case RTL_VER_09:
++ case RTL_VER_14:
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+ ocp_data &= ~FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ usleep_range(1000, 2000);
+ ocp_data |= FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
++ break;
++ default:
++ break;
+ }
+
+ return rtl_enable(tp);
+@@ -2955,12 +3123,40 @@ static void rtl_rx_vlan_en(struct r8152
+ {
+ u32 ocp_data;
+
+- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+- if (enable)
+- ocp_data |= CPCR_RX_VLAN;
+- else
+- ocp_data &= ~CPCR_RX_VLAN;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
++ switch (tp->version) {
++ case RTL_VER_01:
++ case RTL_VER_02:
++ case RTL_VER_03:
++ case RTL_VER_04:
++ case RTL_VER_05:
++ case RTL_VER_06:
++ case RTL_VER_07:
++ case RTL_VER_08:
++ case RTL_VER_09:
++ case RTL_VER_14:
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
++ if (enable)
++ ocp_data |= CPCR_RX_VLAN;
++ else
++ ocp_data &= ~CPCR_RX_VLAN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
++ break;
++
++ case RTL_TEST_01:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ default:
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
++ if (enable)
++ ocp_data |= OUTER_VLAN | INNER_VLAN;
++ else
++ ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
++ break;
++ }
+ }
+
+ static int rtl8152_set_features(struct net_device *dev,
+@@ -3053,6 +3249,40 @@ static void __rtl_set_wol(struct r8152 *
+ device_set_wakeup_enable(&tp->udev->dev, false);
+ }
+
++static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
++{
++ u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
++
++ /* MAC clock speed down */
++ if (enable)
++ ocp_data |= MAC_CLK_SPDWN_EN;
++ else
++ ocp_data &= ~MAC_CLK_SPDWN_EN;
++
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
++}
++
++static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
++{
++ u32 ocp_data;
++
++ /* MAC clock speed down */
++ if (enable) {
++ /* aldps_spdwn_ratio, tp10_spdwn_ratio */
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
++ 0x0403);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
++ ocp_data &= ~EEE_SPDWN_RATIO_MASK;
++ ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
++ } else {
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
++ ocp_data &= ~MAC_CLK_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
++ }
++}
++
+ static void r8153_u1u2en(struct r8152 *tp, bool enable)
+ {
+ u8 u1u2[8];
+@@ -3112,6 +3342,9 @@ static void r8153b_ups_flags(struct r815
+ if (tp->ups_info.eee_cmod_lv)
+ ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
+
++ if (tp->ups_info.r_tune)
++ ups_flags |= UPS_FLAGS_R_TUNE;
++
+ if (tp->ups_info._10m_ckdiv)
+ ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
+
+@@ -3162,6 +3395,88 @@ static void r8153b_ups_flags(struct r815
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
+ }
+
++static void r8156_ups_flags(struct r8152 *tp)
++{
++ u32 ups_flags = 0;
++
++ if (tp->ups_info.green)
++ ups_flags |= UPS_FLAGS_EN_GREEN;
++
++ if (tp->ups_info.aldps)
++ ups_flags |= UPS_FLAGS_EN_ALDPS;
++
++ if (tp->ups_info.eee)
++ ups_flags |= UPS_FLAGS_EN_EEE;
++
++ if (tp->ups_info.flow_control)
++ ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
++
++ if (tp->ups_info.eee_ckdiv)
++ ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
++
++ if (tp->ups_info._10m_ckdiv)
++ ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
++
++ if (tp->ups_info.eee_plloff_100)
++ ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
++
++ if (tp->ups_info.eee_plloff_giga)
++ ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
++
++ if (tp->ups_info._250m_ckdiv)
++ ups_flags |= UPS_FLAGS_250M_CKDIV;
++
++ switch (tp->ups_info.speed_duplex) {
++ case FORCE_10M_HALF:
++ ups_flags |= ups_flags_speed(0);
++ break;
++ case FORCE_10M_FULL:
++ ups_flags |= ups_flags_speed(1);
++ break;
++ case FORCE_100M_HALF:
++ ups_flags |= ups_flags_speed(2);
++ break;
++ case FORCE_100M_FULL:
++ ups_flags |= ups_flags_speed(3);
++ break;
++ case NWAY_10M_HALF:
++ ups_flags |= ups_flags_speed(4);
++ break;
++ case NWAY_10M_FULL:
++ ups_flags |= ups_flags_speed(5);
++ break;
++ case NWAY_100M_HALF:
++ ups_flags |= ups_flags_speed(6);
++ break;
++ case NWAY_100M_FULL:
++ ups_flags |= ups_flags_speed(7);
++ break;
++ case NWAY_1000M_FULL:
++ ups_flags |= ups_flags_speed(8);
++ break;
++ case NWAY_2500M_FULL:
++ ups_flags |= ups_flags_speed(9);
++ break;
++ default:
++ break;
++ }
++
++ switch (tp->ups_info.lite_mode) {
++ case 1:
++ ups_flags |= 0 << 5;
++ break;
++ case 2:
++ ups_flags |= 2 << 5;
++ break;
++ case 0:
++ default:
++ ups_flags |= 1 << 5;
++ break;
++ }
++
++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
++}
++
+ static void rtl_green_en(struct r8152 *tp, bool enable)
+ {
+ u16 data;
+@@ -3225,16 +3540,16 @@ static void r8153b_ups_en(struct r8152 *
+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+- ocp_data |= BIT(0);
+- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data |= UPS_FORCE_PWR_DOWN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ } else {
+ ocp_data &= ~(UPS_EN | USP_PREWAKE);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+- ocp_data &= ~BIT(0);
+- ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data &= ~UPS_FORCE_PWR_DOWN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
+ int i;
+@@ -3254,6 +3569,95 @@ static void r8153b_ups_en(struct r8152 *
+ }
+ }
+
++static void r8153c_ups_en(struct r8152 *tp, bool enable)
++{
++ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
++
++ if (enable) {
++ r8153b_ups_flags(tp);
++
++ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data |= UPS_FORCE_PWR_DOWN;
++ ocp_data &= ~BIT(7);
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
++ } else {
++ ocp_data &= ~(UPS_EN | USP_PREWAKE);
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data &= ~UPS_FORCE_PWR_DOWN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
++
++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
++ int i;
++
++ for (i = 0; i < 500; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++ AUTOLOAD_DONE)
++ break;
++ msleep(20);
++ }
++
++ tp->rtl_ops.hw_phy_cfg(tp);
++
++ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
++ tp->duplex, tp->advertising);
++ }
++
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
++ ocp_data |= BIT(8);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
++
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++ }
++}
++
++static void r8156_ups_en(struct r8152 *tp, bool enable)
++{
++ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
++
++ if (enable) {
++ r8156_ups_flags(tp);
++
++ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data |= UPS_FORCE_PWR_DOWN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
++
++ switch (tp->version) {
++ case RTL_VER_13:
++ case RTL_VER_15:
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
++ ocp_data &= ~OOBS_POLLING;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
++ break;
++ default:
++ break;
++ }
++ } else {
++ ocp_data &= ~(UPS_EN | USP_PREWAKE);
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data &= ~UPS_FORCE_PWR_DOWN;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
++
++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
++ tp->rtl_ops.hw_phy_cfg(tp);
++
++ rtl8152_set_speed(tp, tp->autoneg, tp->speed,
++ tp->duplex, tp->advertising);
++ }
++ }
++}
++
+ static void r8153_power_cut_en(struct r8152 *tp, bool enable)
+ {
+ u32 ocp_data;
+@@ -3383,6 +3787,38 @@ static void rtl8153b_runtime_enable(stru
+ }
+ }
+
++static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
++{
++ if (enable) {
++ r8153_queue_wake(tp, true);
++ r8153b_u1u2en(tp, false);
++ r8153_u2p3en(tp, false);
++ rtl_runtime_suspend_enable(tp, true);
++ r8153c_ups_en(tp, true);
++ } else {
++ r8153c_ups_en(tp, false);
++ r8153_queue_wake(tp, false);
++ rtl_runtime_suspend_enable(tp, false);
++ r8153b_u1u2en(tp, true);
++ }
++}
++
++static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
++{
++ if (enable) {
++ r8153_queue_wake(tp, true);
++ r8153b_u1u2en(tp, false);
++ r8153_u2p3en(tp, false);
++ rtl_runtime_suspend_enable(tp, true);
++ } else {
++ r8153_queue_wake(tp, false);
++ rtl_runtime_suspend_enable(tp, false);
++ r8153_u2p3en(tp, true);
++ if (tp->udev->speed >= USB_SPEED_SUPER)
++ r8153b_u1u2en(tp, true);
++ }
++}
++
+ static void r8153_teredo_off(struct r8152 *tp)
+ {
+ u32 ocp_data;
+@@ -3403,14 +3839,19 @@ static void r8153_teredo_off(struct r815
+
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_TEST_01:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_14:
++ case RTL_VER_15:
++ default:
+ /* The bit 0 ~ 7 are relative with teredo settings. They are
+ * W1C (write 1 to clear), so set all 1 to disable it.
+ */
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
+ break;
+-
+- default:
+- break;
+ }
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+@@ -3445,6 +3886,12 @@ static void rtl_clear_bp(struct r8152 *t
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_14:
++ case RTL_VER_15:
+ default:
+ if (type == MCU_TYPE_USB) {
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
+@@ -3654,6 +4101,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+ case RTL_VER_06:
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_14:
++ case RTL_VER_15:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = PLA_BP_EN;
+@@ -3677,6 +4129,11 @@ static bool rtl8152_is_fw_mac_ok(struct
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_14:
++ case RTL_VER_15:
+ fw_reg = 0xe600;
+ bp_ba_addr = USB_BP_BA;
+ bp_en_addr = USB_BP2_EN;
+@@ -4216,6 +4673,22 @@ static void r8153_eee_en(struct r8152 *t
+ tp->ups_info.eee = enable;
+ }
+
++static void r8156_eee_en(struct r8152 *tp, bool enable)
++{
++ u16 config;
++
++ r8153_eee_en(tp, enable);
++
++ config = ocp_reg_read(tp, OCP_EEE_ADV2);
++
++ if (enable)
++ config |= MDIO_EEE_2_5GT;
++ else
++ config &= ~MDIO_EEE_2_5GT;
++
++ ocp_reg_write(tp, OCP_EEE_ADV2, config);
++}
++
+ static void rtl_eee_enable(struct r8152 *tp, bool enable)
+ {
+ switch (tp->version) {
+@@ -4237,6 +4710,7 @@ static void rtl_eee_enable(struct r8152
+ case RTL_VER_06:
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_14:
+ if (enable) {
+ r8153_eee_en(tp, true);
+ ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
+@@ -4245,6 +4719,19 @@ static void rtl_eee_enable(struct r8152
+ ocp_reg_write(tp, OCP_EEE_ADV, 0);
+ }
+ break;
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ if (enable) {
++ r8156_eee_en(tp, true);
++ ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
++ } else {
++ r8156_eee_en(tp, false);
++ ocp_reg_write(tp, OCP_EEE_ADV, 0);
++ }
++ break;
+ default:
+ break;
+ }
+@@ -4291,6 +4778,20 @@ static void wait_oob_link_list_ready(str
+ }
+ }
+
++static void r8156b_wait_loading_flash(struct r8152 *tp)
++{
++ if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) &&
++ !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) {
++ int i;
++
++ for (i = 0; i < 100; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
++ break;
++ usleep_range(1000, 2000);
++ }
++ }
++}
++
+ static void r8152b_exit_oob(struct r8152 *tp)
+ {
+ u32 ocp_data;
+@@ -4341,7 +4842,7 @@ static void r8152b_exit_oob(struct r8152
+ }
+
+ /* TX share fifo free credit full threshold */
+- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
+@@ -4518,6 +5019,21 @@ static int r8153b_post_firmware_1(struct
+ return 0;
+ }
+
++static int r8153c_post_firmware_1(struct r8152 *tp)
++{
++ u32 ocp_data;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
++ ocp_data |= FLOW_CTRL_PATCH_2;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
++ ocp_data |= FC_PATCH_TASK;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
++
++ return 0;
++}
++
+ static void r8153_aldps_en(struct r8152 *tp, bool enable)
+ {
+ u16 data;
+@@ -4720,6 +5236,13 @@ static void r8153b_hw_phy_cfg(struct r81
+ set_bit(PHY_RESET, &tp->flags);
+ }
+
++static void r8153c_hw_phy_cfg(struct r8152 *tp)
++{
++ r8153b_hw_phy_cfg(tp);
++
++ tp->ups_info.r_tune = true;
++}
++
+ static void rtl8153_change_mtu(struct r8152 *tp)
+ {
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
+@@ -4807,6 +5330,7 @@ static void r8153_enter_oob(struct r8152
+
+ case RTL_VER_08:
+ case RTL_VER_09:
++ case RTL_VER_14:
+ /* Clear teredo wake event. bit[15:8] is the teredo wakeup
+ * type. Set it to zero. bits[7:0] are the W1C bits about
+ * the events. Set them to all 1 to clear them.
+@@ -4843,6 +5367,96 @@ static void rtl8153_disable(struct r8152
+ r8153_aldps_en(tp, true);
+ }
+
++static int rtl8156_enable(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 speed;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return -ENODEV;
++
++ set_tx_qlen(tp);
++ rtl_set_eee_plus(tp);
++ r8153_set_rx_early_timeout(tp);
++ r8153_set_rx_early_size(tp);
++
++ speed = rtl8152_get_speed(tp);
++ rtl_set_ifg(tp, speed);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ if (speed & _2500bps)
++ ocp_data &= ~IDLE_SPDWN_EN;
++ else
++ ocp_data |= IDLE_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++
++ if (speed & _1000bps)
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
++ else if (speed & _500bps)
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d);
++
++ if (tp->udev->speed == USB_SPEED_HIGH) {
++ /* USB 0xb45e[3:0] l1_nyet_hird */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
++ ocp_data &= ~0xf;
++ if (is_flow_control(speed))
++ ocp_data |= 0xf;
++ else
++ ocp_data |= 0x1;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
++ }
++
++ return rtl_enable(tp);
++}
++
++static int rtl8156b_enable(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 speed;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return -ENODEV;
++
++ set_tx_qlen(tp);
++ rtl_set_eee_plus(tp);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
++ ocp_data &= ~RX_AGGR_NUM_MASK;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
++
++ r8153_set_rx_early_timeout(tp);
++ r8153_set_rx_early_size(tp);
++
++ speed = rtl8152_get_speed(tp);
++ rtl_set_ifg(tp, speed);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ if (speed & _2500bps)
++ ocp_data &= ~IDLE_SPDWN_EN;
++ else
++ ocp_data |= IDLE_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++
++ if (tp->udev->speed == USB_SPEED_HIGH) {
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
++ ocp_data &= ~0xf;
++ if (is_flow_control(speed))
++ ocp_data |= 0xf;
++ else
++ ocp_data |= 0x1;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
++ }
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
++ ocp_data &= ~FC_PATCH_TASK;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
++ usleep_range(1000, 2000);
++ ocp_data |= FC_PATCH_TASK;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
++
++ return rtl_enable(tp);
++}
++
+ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
+ u32 advertising)
+ {
+@@ -4891,58 +5505,73 @@ static int rtl8152_set_speed(struct r815
+
+ tp->mii.force_media = 1;
+ } else {
+- u16 anar, tmp1;
++ u16 orig, new1;
+ u32 support;
+
+ support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
+ RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
+
+- if (tp->mii.supports_gmii)
++ if (tp->mii.supports_gmii) {
+ support |= RTL_ADVERTISED_1000_FULL;
+
++ if (tp->support_2500full)
++ support |= RTL_ADVERTISED_2500_FULL;
++ }
++
+ if (!(advertising & support))
+ return -EINVAL;
+
+- anar = r8152_mdio_read(tp, MII_ADVERTISE);
+- tmp1 = anar & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
++ orig = r8152_mdio_read(tp, MII_ADVERTISE);
++ new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL);
+ if (advertising & RTL_ADVERTISED_10_HALF) {
+- tmp1 |= ADVERTISE_10HALF;
++ new1 |= ADVERTISE_10HALF;
+ tp->ups_info.speed_duplex = NWAY_10M_HALF;
+ }
+ if (advertising & RTL_ADVERTISED_10_FULL) {
+- tmp1 |= ADVERTISE_10FULL;
++ new1 |= ADVERTISE_10FULL;
+ tp->ups_info.speed_duplex = NWAY_10M_FULL;
+ }
+
+ if (advertising & RTL_ADVERTISED_100_HALF) {
+- tmp1 |= ADVERTISE_100HALF;
++ new1 |= ADVERTISE_100HALF;
+ tp->ups_info.speed_duplex = NWAY_100M_HALF;
+ }
+ if (advertising & RTL_ADVERTISED_100_FULL) {
+- tmp1 |= ADVERTISE_100FULL;
++ new1 |= ADVERTISE_100FULL;
+ tp->ups_info.speed_duplex = NWAY_100M_FULL;
+ }
+
+- if (anar != tmp1) {
+- r8152_mdio_write(tp, MII_ADVERTISE, tmp1);
+- tp->mii.advertising = tmp1;
++ if (orig != new1) {
++ r8152_mdio_write(tp, MII_ADVERTISE, new1);
++ tp->mii.advertising = new1;
+ }
+
+ if (tp->mii.supports_gmii) {
+- u16 gbcr;
+-
+- gbcr = r8152_mdio_read(tp, MII_CTRL1000);
+- tmp1 = gbcr & ~(ADVERTISE_1000FULL |
++ orig = r8152_mdio_read(tp, MII_CTRL1000);
++ new1 = orig & ~(ADVERTISE_1000FULL |
+ ADVERTISE_1000HALF);
+
+ if (advertising & RTL_ADVERTISED_1000_FULL) {
+- tmp1 |= ADVERTISE_1000FULL;
++ new1 |= ADVERTISE_1000FULL;
+ tp->ups_info.speed_duplex = NWAY_1000M_FULL;
+ }
+
+- if (gbcr != tmp1)
+- r8152_mdio_write(tp, MII_CTRL1000, tmp1);
++ if (orig != new1)
++ r8152_mdio_write(tp, MII_CTRL1000, new1);
++ }
++
++ if (tp->support_2500full) {
++ orig = ocp_reg_read(tp, OCP_10GBT_CTRL);
++ new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G;
++
++ if (advertising & RTL_ADVERTISED_2500_FULL) {
++ new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G;
++ tp->ups_info.speed_duplex = NWAY_2500M_FULL;
++ }
++
++ if (orig != new1)
++ ocp_reg_write(tp, OCP_10GBT_CTRL, new1);
+ }
+
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+@@ -5098,6 +5727,253 @@ static void rtl8153b_down(struct r8152 *
+ r8153_aldps_en(tp, true);
+ }
+
++static void rtl8153c_change_mtu(struct r8152 *tp)
++{
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64);
++
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
++
++ /* Adjust the tx fifo free credit full threshold, otherwise
++ * the fifo would be too small to send a jumbo frame packet.
++ */
++ if (tp->netdev->mtu < 8000)
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8);
++ else
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8);
++}
++
++static void rtl8153c_up(struct r8152 *tp)
++{
++ u32 ocp_data;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++
++ r8153b_u1u2en(tp, false);
++ r8153_u2p3en(tp, false);
++ r8153_aldps_en(tp, false);
++
++ rxdy_gated_en(tp, true);
++ r8153_teredo_off(tp);
++
++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++ ocp_data &= ~RCR_ACPT_ALL;
++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++ rtl8152_nic_reset(tp);
++ rtl_reset_bmu(tp);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++ ocp_data &= ~NOW_IS_OOB;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++ ocp_data &= ~MCU_BORW_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++ wait_oob_link_list_ready(tp);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++ ocp_data |= RE_INIT_LL;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++ wait_oob_link_list_ready(tp);
++
++ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
++
++ rtl8153c_change_mtu(tp);
++
++ rtl8152_nic_reset(tp);
++
++ /* rx share fifo credit full threshold */
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02);
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
++
++ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
++
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
++ ocp_data |= BIT(8);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
++
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
++ ocp_data &= ~PLA_MCU_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
++
++ r8153_aldps_en(tp, true);
++ r8153b_u1u2en(tp, true);
++}
++
++static inline u32 fc_pause_on_auto(struct r8152 *tp)
++{
++ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
++}
++
++static inline u32 fc_pause_off_auto(struct r8152 *tp)
++{
++ return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024);
++}
++
++static void r8156_fc_parameter(struct r8152 *tp)
++{
++ u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp);
++ u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp);
++
++ switch (tp->version) {
++ case RTL_VER_10:
++ case RTL_VER_11:
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 8);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 8);
++ break;
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16);
++ break;
++ default:
++ break;
++ }
++}
++
++static void rtl8156_change_mtu(struct r8152 *tp)
++{
++ u32 rx_max_size = mtu_to_size(tp->netdev->mtu);
++
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size);
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
++ r8156_fc_parameter(tp);
++
++ /* TX share fifo free credit full threshold */
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
++ ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16);
++}
++
++static void rtl8156_up(struct r8152 *tp)
++{
++ u32 ocp_data;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++
++ r8153b_u1u2en(tp, false);
++ r8153_u2p3en(tp, false);
++ r8153_aldps_en(tp, false);
++
++ rxdy_gated_en(tp, true);
++ r8153_teredo_off(tp);
++
++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++ ocp_data &= ~RCR_ACPT_ALL;
++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++ rtl8152_nic_reset(tp);
++ rtl_reset_bmu(tp);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++ ocp_data &= ~NOW_IS_OOB;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
++ ocp_data &= ~MCU_BORW_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
++
++ rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
++
++ rtl8156_change_mtu(tp);
++
++ switch (tp->version) {
++ case RTL_TEST_01:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
++ ocp_data |= ACT_ODMA;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
++ break;
++ default:
++ break;
++ }
++
++ /* share FIFO settings */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
++ ocp_data &= ~RXFIFO_FULL_MASK;
++ ocp_data |= 0x08;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
++ ocp_data &= ~PLA_MCU_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
++ ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
++
++ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
++
++ if (tp->saved_wolopts != __rtl_get_wol(tp)) {
++ netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n");
++ __rtl_set_wol(tp, tp->saved_wolopts);
++ }
++
++ r8153_aldps_en(tp, true);
++ r8153_u2p3en(tp, true);
++
++ if (tp->udev->speed >= USB_SPEED_SUPER)
++ r8153b_u1u2en(tp, true);
++}
++
++static void rtl8156_down(struct r8152 *tp)
++{
++ u32 ocp_data;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
++ rtl_drop_queued_tx(tp);
++ return;
++ }
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
++ ocp_data |= PLA_MCU_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
++
++ r8153b_u1u2en(tp, false);
++ r8153_u2p3en(tp, false);
++ r8153b_power_cut_en(tp, false);
++ r8153_aldps_en(tp, false);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++ ocp_data &= ~NOW_IS_OOB;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++ rtl_disable(tp);
++ rtl_reset_bmu(tp);
++
++ /* Clear teredo wake event. bit[15:8] is the teredo wakeup
++ * type. Set it to zero. bits[7:0] are the W1C bits about
++ * the events. Set them to all 1 to clear them.
++ */
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
++ ocp_data |= NOW_IS_OOB;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
++
++ rtl_rx_vlan_en(tp, true);
++ rxdy_gated_en(tp, false);
++
++ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
++ ocp_data |= RCR_APM | RCR_AM | RCR_AB;
++ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++ r8153_aldps_en(tp, true);
++}
++
+ static bool rtl8152_in_nway(struct r8152 *tp)
+ {
+ u16 nway_state;
+@@ -5128,7 +6004,7 @@ static void set_carrier(struct r8152 *tp
+ {
+ struct net_device *netdev = tp->netdev;
+ struct napi_struct *napi = &tp->napi;
+- u8 speed;
++ u16 speed;
+
+ speed = rtl8152_get_speed(tp);
+
+@@ -5141,7 +6017,7 @@ static void set_carrier(struct r8152 *tp
+ rtl_start_rx(tp);
+ clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+ _rtl8152_set_rx_mode(netdev);
+- napi_enable(&tp->napi);
++ napi_enable(napi);
+ netif_wake_queue(netdev);
+ netif_info(tp, link, netdev, "carrier on\n");
+ } else if (netif_queue_stopped(netdev) &&
+@@ -5521,14 +6397,9 @@ static void r8153_init(struct r8152 *tp)
+
+ ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
+
+- /* MAC clock speed down */
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
+-
+ r8153_power_cut_en(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
++ r8153_mac_clk_speed_down(tp, false);
+ r8153_u1u2en(tp, true);
+ usb_enable_lpm(tp->udev);
+
+@@ -5621,9 +6492,7 @@ static void r8153b_init(struct r8152 *tp
+ usb_enable_lpm(tp->udev);
+
+ /* MAC clock speed down */
+- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+- ocp_data |= MAC_CLK_SPDWN_EN;
+- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
++ r8153_mac_clk_speed_down(tp, true);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+ ocp_data &= ~PLA_MCU_SPDWN_EN;
+@@ -5652,6 +6521,1069 @@ static void r8153b_init(struct r8152 *tp
+ r8152_led_configuration(tp);
+ }
+
++static void r8153c_init(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 data;
++ int i;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++
++ r8153b_u1u2en(tp, false);
++
++ /* Disable spi_en */
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
++ ocp_data &= ~BIT(3);
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
++ ocp_data |= BIT(1);
++ ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
++
++ for (i = 0; i < 500; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++ AUTOLOAD_DONE)
++ break;
++
++ msleep(20);
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++ }
++
++ data = r8153_phy_status(tp, 0);
++
++ data = r8152_mdio_read(tp, MII_BMCR);
++ if (data & BMCR_PDOWN) {
++ data &= ~BMCR_PDOWN;
++ r8152_mdio_write(tp, MII_BMCR, data);
++ }
++
++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
++
++ r8153_u2p3en(tp, false);
++
++ /* MSC timer = 0xfff * 8ms = 32760 ms */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
++
++ r8153b_power_cut_en(tp, false);
++ r8153c_ups_en(tp, false);
++ r8153_queue_wake(tp, false);
++ rtl_runtime_suspend_enable(tp, false);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
++ if (rtl8152_get_speed(tp) & LINK_STATUS)
++ ocp_data |= CUR_LINK_OK;
++ else
++ ocp_data &= ~CUR_LINK_OK;
++
++ ocp_data |= POLL_LINK_CHG;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
++
++ r8153b_u1u2en(tp, true);
++
++ usb_enable_lpm(tp->udev);
++
++ /* MAC clock speed down */
++ r8153_mac_clk_speed_down(tp, true);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
++ ocp_data &= ~BIT(7);
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
++
++ set_bit(GREEN_ETHERNET, &tp->flags);
++
++ /* rx aggregation */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++ rtl_tally_reset(tp);
++
++ tp->coalesce = 15000; /* 15 us */
++}
++
++static void r8156_hw_phy_cfg(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 data;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
++ if (ocp_data & PCUT_STATUS) {
++ ocp_data &= ~PCUT_STATUS;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
++ }
++
++ data = r8153_phy_status(tp, 0);
++ switch (data) {
++ case PHY_STAT_EXT_INIT:
++ rtl8152_apply_firmware(tp, true);
++
++ data = ocp_reg_read(tp, 0xa468);
++ data &= ~(BIT(3) | BIT(1));
++ ocp_reg_write(tp, 0xa468, data);
++ break;
++ case PHY_STAT_LAN_ON:
++ case PHY_STAT_PWRDN:
++ default:
++ rtl8152_apply_firmware(tp, false);
++ break;
++ }
++
++ /* disable ALDPS before updating the PHY parameters */
++ r8153_aldps_en(tp, false);
++
++ /* disable EEE before updating the PHY parameters */
++ rtl_eee_enable(tp, false);
++
++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
++ ocp_data |= PFM_PWM_SWITCH;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
++
++ switch (tp->version) {
++ case RTL_VER_10:
++ data = ocp_reg_read(tp, 0xad40);
++ data &= ~0x3ff;
++ data |= BIT(7) | BIT(2);
++ ocp_reg_write(tp, 0xad40, data);
++
++ data = ocp_reg_read(tp, 0xad4e);
++ data |= BIT(4);
++ ocp_reg_write(tp, 0xad4e, data);
++ data = ocp_reg_read(tp, 0xad16);
++ data &= ~0x3ff;
++ data |= 0x6;
++ ocp_reg_write(tp, 0xad16, data);
++ data = ocp_reg_read(tp, 0xad32);
++ data &= ~0x3f;
++ data |= 6;
++ ocp_reg_write(tp, 0xad32, data);
++ data = ocp_reg_read(tp, 0xac08);
++ data &= ~(BIT(12) | BIT(8));
++ ocp_reg_write(tp, 0xac08, data);
++ data = ocp_reg_read(tp, 0xac8a);
++ data |= BIT(12) | BIT(13) | BIT(14);
++ data &= ~BIT(15);
++ ocp_reg_write(tp, 0xac8a, data);
++ data = ocp_reg_read(tp, 0xad18);
++ data |= BIT(10);
++ ocp_reg_write(tp, 0xad18, data);
++ data = ocp_reg_read(tp, 0xad1a);
++ data |= 0x3ff;
++ ocp_reg_write(tp, 0xad1a, data);
++ data = ocp_reg_read(tp, 0xad1c);
++ data |= 0x3ff;
++ ocp_reg_write(tp, 0xad1c, data);
++
++ data = sram_read(tp, 0x80ea);
++ data &= ~0xff00;
++ data |= 0xc400;
++ sram_write(tp, 0x80ea, data);
++ data = sram_read(tp, 0x80eb);
++ data &= ~0x0700;
++ data |= 0x0300;
++ sram_write(tp, 0x80eb, data);
++ data = sram_read(tp, 0x80f8);
++ data &= ~0xff00;
++ data |= 0x1c00;
++ sram_write(tp, 0x80f8, data);
++ data = sram_read(tp, 0x80f1);
++ data &= ~0xff00;
++ data |= 0x3000;
++ sram_write(tp, 0x80f1, data);
++
++ data = sram_read(tp, 0x80fe);
++ data &= ~0xff00;
++ data |= 0xa500;
++ sram_write(tp, 0x80fe, data);
++ data = sram_read(tp, 0x8102);
++ data &= ~0xff00;
++ data |= 0x5000;
++ sram_write(tp, 0x8102, data);
++ data = sram_read(tp, 0x8015);
++ data &= ~0xff00;
++ data |= 0x3300;
++ sram_write(tp, 0x8015, data);
++ data = sram_read(tp, 0x8100);
++ data &= ~0xff00;
++ data |= 0x7000;
++ sram_write(tp, 0x8100, data);
++ data = sram_read(tp, 0x8014);
++ data &= ~0xff00;
++ data |= 0xf000;
++ sram_write(tp, 0x8014, data);
++ data = sram_read(tp, 0x8016);
++ data &= ~0xff00;
++ data |= 0x6500;
++ sram_write(tp, 0x8016, data);
++ data = sram_read(tp, 0x80dc);
++ data &= ~0xff00;
++ data |= 0xed00;
++ sram_write(tp, 0x80dc, data);
++ data = sram_read(tp, 0x80df);
++ data |= BIT(8);
++ sram_write(tp, 0x80df, data);
++ data = sram_read(tp, 0x80e1);
++ data &= ~BIT(8);
++ sram_write(tp, 0x80e1, data);
++
++ data = ocp_reg_read(tp, 0xbf06);
++ data &= ~0x003f;
++ data |= 0x0038;
++ ocp_reg_write(tp, 0xbf06, data);
++
++ sram_write(tp, 0x819f, 0xddb6);
++
++ ocp_reg_write(tp, 0xbc34, 0x5555);
++ data = ocp_reg_read(tp, 0xbf0a);
++ data &= ~0x0e00;
++ data |= 0x0a00;
++ ocp_reg_write(tp, 0xbf0a, data);
++
++ data = ocp_reg_read(tp, 0xbd2c);
++ data &= ~BIT(13);
++ ocp_reg_write(tp, 0xbd2c, data);
++ break;
++ case RTL_VER_11:
++ data = ocp_reg_read(tp, 0xad16);
++ data |= 0x3ff;
++ ocp_reg_write(tp, 0xad16, data);
++ data = ocp_reg_read(tp, 0xad32);
++ data &= ~0x3f;
++ data |= 6;
++ ocp_reg_write(tp, 0xad32, data);
++ data = ocp_reg_read(tp, 0xac08);
++ data &= ~(BIT(12) | BIT(8));
++ ocp_reg_write(tp, 0xac08, data);
++ data = ocp_reg_read(tp, 0xacc0);
++ data &= ~0x3;
++ data |= BIT(1);
++ ocp_reg_write(tp, 0xacc0, data);
++ data = ocp_reg_read(tp, 0xad40);
++ data &= ~0xe7;
++ data |= BIT(6) | BIT(2);
++ ocp_reg_write(tp, 0xad40, data);
++ data = ocp_reg_read(tp, 0xac14);
++ data &= ~BIT(7);
++ ocp_reg_write(tp, 0xac14, data);
++ data = ocp_reg_read(tp, 0xac80);
++ data &= ~(BIT(8) | BIT(9));
++ ocp_reg_write(tp, 0xac80, data);
++ data = ocp_reg_read(tp, 0xac5e);
++ data &= ~0x7;
++ data |= BIT(1);
++ ocp_reg_write(tp, 0xac5e, data);
++ ocp_reg_write(tp, 0xad4c, 0x00a8);
++ ocp_reg_write(tp, 0xac5c, 0x01ff);
++ data = ocp_reg_read(tp, 0xac8a);
++ data &= ~0xf0;
++ data |= BIT(4) | BIT(5);
++ ocp_reg_write(tp, 0xac8a, data);
++ ocp_reg_write(tp, 0xb87c, 0x8157);
++ data = ocp_reg_read(tp, 0xb87e);
++ data &= ~0xff00;
++ data |= 0x0500;
++ ocp_reg_write(tp, 0xb87e, data);
++ ocp_reg_write(tp, 0xb87c, 0x8159);
++ data = ocp_reg_read(tp, 0xb87e);
++ data &= ~0xff00;
++ data |= 0x0700;
++ ocp_reg_write(tp, 0xb87e, data);
++
++ /* AAGC */
++ ocp_reg_write(tp, 0xb87c, 0x80a2);
++ ocp_reg_write(tp, 0xb87e, 0x0153);
++ ocp_reg_write(tp, 0xb87c, 0x809c);
++ ocp_reg_write(tp, 0xb87e, 0x0153);
++
++ /* EEE parameter */
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
++ ocp_data |= EN_XG_LIP | EN_G_LIP;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
++
++ sram_write(tp, 0x8257, 0x020f); /* XG PLL */
++ sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
++
++ if (rtl_phy_patch_request(tp, true, true))
++ return;
++
++ /* Advance EEE */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ ocp_data |= EEE_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++
++ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
++ data &= ~(EN_EEE_100 | EN_EEE_1000);
++ data |= EN_10M_CLKDIV;
++ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
++ tp->ups_info._10m_ckdiv = true;
++ tp->ups_info.eee_plloff_100 = false;
++ tp->ups_info.eee_plloff_giga = false;
++
++ data = ocp_reg_read(tp, OCP_POWER_CFG);
++ data &= ~EEE_CLKDIV_EN;
++ ocp_reg_write(tp, OCP_POWER_CFG, data);
++ tp->ups_info.eee_ckdiv = false;
++
++ ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
++ ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5));
++ tp->ups_info._250m_ckdiv = false;
++
++ rtl_phy_patch_request(tp, false, true);
++
++ /* enable ADC Ibias Cal */
++ data = ocp_reg_read(tp, 0xd068);
++ data |= BIT(13);
++ ocp_reg_write(tp, 0xd068, data);
++
++ /* enable Thermal Sensor */
++ data = sram_read(tp, 0x81a2);
++ data &= ~BIT(8);
++ sram_write(tp, 0x81a2, data);
++ data = ocp_reg_read(tp, 0xb54c);
++ data &= ~0xff00;
++ data |= 0xdb00;
++ ocp_reg_write(tp, 0xb54c, data);
++
++ /* Nway 2.5G Lite */
++ data = ocp_reg_read(tp, 0xa454);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa454, data);
++
++ /* CS DSP solution */
++ data = ocp_reg_read(tp, OCP_10GBT_CTRL);
++ data |= RTL_ADV2_5G_F_R;
++ ocp_reg_write(tp, OCP_10GBT_CTRL, data);
++ data = ocp_reg_read(tp, 0xad4e);
++ data &= ~BIT(4);
++ ocp_reg_write(tp, 0xad4e, data);
++ data = ocp_reg_read(tp, 0xa86a);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa86a, data);
++
++ /* MDI SWAP */
++ if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) &&
++ (ocp_reg_read(tp, 0xd068) & BIT(1))) {
++ u16 swap_a, swap_b;
++
++ data = ocp_reg_read(tp, 0xd068);
++ data &= ~0x1f;
++ data |= 0x1; /* p0 */
++ ocp_reg_write(tp, 0xd068, data);
++ swap_a = ocp_reg_read(tp, 0xd06a);
++ data &= ~0x18;
++ data |= 0x18; /* p3 */
++ ocp_reg_write(tp, 0xd068, data);
++ swap_b = ocp_reg_read(tp, 0xd06a);
++ data &= ~0x18; /* p0 */
++ ocp_reg_write(tp, 0xd068, data);
++ ocp_reg_write(tp, 0xd06a,
++ (swap_a & ~0x7ff) | (swap_b & 0x7ff));
++ data |= 0x18; /* p3 */
++ ocp_reg_write(tp, 0xd068, data);
++ ocp_reg_write(tp, 0xd06a,
++ (swap_b & ~0x7ff) | (swap_a & 0x7ff));
++ data &= ~0x18;
++ data |= 0x08; /* p1 */
++ ocp_reg_write(tp, 0xd068, data);
++ swap_a = ocp_reg_read(tp, 0xd06a);
++ data &= ~0x18;
++ data |= 0x10; /* p2 */
++ ocp_reg_write(tp, 0xd068, data);
++ swap_b = ocp_reg_read(tp, 0xd06a);
++ data &= ~0x18;
++ data |= 0x08; /* p1 */
++ ocp_reg_write(tp, 0xd068, data);
++ ocp_reg_write(tp, 0xd06a,
++ (swap_a & ~0x7ff) | (swap_b & 0x7ff));
++ data &= ~0x18;
++ data |= 0x10; /* p2 */
++ ocp_reg_write(tp, 0xd068, data);
++ ocp_reg_write(tp, 0xd06a,
++ (swap_b & ~0x7ff) | (swap_a & 0x7ff));
++ swap_a = ocp_reg_read(tp, 0xbd5a);
++ swap_b = ocp_reg_read(tp, 0xbd5c);
++ ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) |
++ ((swap_b & 0x1f) << 8) |
++ ((swap_b >> 8) & 0x1f));
++ ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) |
++ ((swap_a & 0x1f) << 8) |
++ ((swap_a >> 8) & 0x1f));
++ swap_a = ocp_reg_read(tp, 0xbc18);
++ swap_b = ocp_reg_read(tp, 0xbc1a);
++ ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) |
++ ((swap_b & 0x1f) << 8) |
++ ((swap_b >> 8) & 0x1f));
++ ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) |
++ ((swap_a & 0x1f) << 8) |
++ ((swap_a >> 8) & 0x1f));
++ }
++ break;
++ default:
++ break;
++ }
++
++ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
++
++ data = ocp_reg_read(tp, 0xa428);
++ data &= ~BIT(9);
++ ocp_reg_write(tp, 0xa428, data);
++ data = ocp_reg_read(tp, 0xa5ea);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa5ea, data);
++ tp->ups_info.lite_mode = 0;
++
++ if (tp->eee_en)
++ rtl_eee_enable(tp, true);
++
++ r8153_aldps_en(tp, true);
++ r8152b_enable_fc(tp);
++ r8153_u2p3en(tp, true);
++
++ set_bit(PHY_RESET, &tp->flags);
++}
++
++static void r8156b_hw_phy_cfg(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 data;
++
++ switch (tp->version) {
++ case RTL_VER_12:
++ ocp_reg_write(tp, 0xbf86, 0x9000);
++ data = ocp_reg_read(tp, 0xc402);
++ data |= BIT(10);
++ ocp_reg_write(tp, 0xc402, data);
++ data &= ~BIT(10);
++ ocp_reg_write(tp, 0xc402, data);
++ ocp_reg_write(tp, 0xbd86, 0x1010);
++ ocp_reg_write(tp, 0xbd88, 0x1010);
++ data = ocp_reg_read(tp, 0xbd4e);
++ data &= ~(BIT(10) | BIT(11));
++ data |= BIT(11);
++ ocp_reg_write(tp, 0xbd4e, data);
++ data = ocp_reg_read(tp, 0xbf46);
++ data &= ~0xf00;
++ data |= 0x700;
++ ocp_reg_write(tp, 0xbf46, data);
++ break;
++ case RTL_VER_13:
++ case RTL_VER_15:
++ r8156b_wait_loading_flash(tp);
++ break;
++ default:
++ break;
++ }
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
++ if (ocp_data & PCUT_STATUS) {
++ ocp_data &= ~PCUT_STATUS;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
++ }
++
++ data = r8153_phy_status(tp, 0);
++ switch (data) {
++ case PHY_STAT_EXT_INIT:
++ rtl8152_apply_firmware(tp, true);
++
++ data = ocp_reg_read(tp, 0xa466);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa466, data);
++
++ data = ocp_reg_read(tp, 0xa468);
++ data &= ~(BIT(3) | BIT(1));
++ ocp_reg_write(tp, 0xa468, data);
++ break;
++ case PHY_STAT_LAN_ON:
++ case PHY_STAT_PWRDN:
++ default:
++ rtl8152_apply_firmware(tp, false);
++ break;
++ }
++
++ data = r8152_mdio_read(tp, MII_BMCR);
++ if (data & BMCR_PDOWN) {
++ data &= ~BMCR_PDOWN;
++ r8152_mdio_write(tp, MII_BMCR, data);
++ }
++
++ /* disable ALDPS before updating the PHY parameters */
++ r8153_aldps_en(tp, false);
++
++ /* disable EEE before updating the PHY parameters */
++ rtl_eee_enable(tp, false);
++
++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
++ ocp_data |= PFM_PWM_SWITCH;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
++
++ switch (tp->version) {
++ case RTL_VER_12:
++ data = ocp_reg_read(tp, 0xbc08);
++ data |= BIT(3) | BIT(2);
++ ocp_reg_write(tp, 0xbc08, data);
++
++ data = sram_read(tp, 0x8fff);
++ data &= ~0xff00;
++ data |= 0x0400;
++ sram_write(tp, 0x8fff, data);
++
++ data = ocp_reg_read(tp, 0xacda);
++ data |= 0xff00;
++ ocp_reg_write(tp, 0xacda, data);
++ data = ocp_reg_read(tp, 0xacde);
++ data |= 0xf000;
++ ocp_reg_write(tp, 0xacde, data);
++ ocp_reg_write(tp, 0xac8c, 0x0ffc);
++ ocp_reg_write(tp, 0xac46, 0xb7b4);
++ ocp_reg_write(tp, 0xac50, 0x0fbc);
++ ocp_reg_write(tp, 0xac3c, 0x9240);
++ ocp_reg_write(tp, 0xac4e, 0x0db4);
++ ocp_reg_write(tp, 0xacc6, 0x0707);
++ ocp_reg_write(tp, 0xacc8, 0xa0d3);
++ ocp_reg_write(tp, 0xad08, 0x0007);
++
++ ocp_reg_write(tp, 0xb87c, 0x8560);
++ ocp_reg_write(tp, 0xb87e, 0x19cc);
++ ocp_reg_write(tp, 0xb87c, 0x8562);
++ ocp_reg_write(tp, 0xb87e, 0x19cc);
++ ocp_reg_write(tp, 0xb87c, 0x8564);
++ ocp_reg_write(tp, 0xb87e, 0x19cc);
++ ocp_reg_write(tp, 0xb87c, 0x8566);
++ ocp_reg_write(tp, 0xb87e, 0x147d);
++ ocp_reg_write(tp, 0xb87c, 0x8568);
++ ocp_reg_write(tp, 0xb87e, 0x147d);
++ ocp_reg_write(tp, 0xb87c, 0x856a);
++ ocp_reg_write(tp, 0xb87e, 0x147d);
++ ocp_reg_write(tp, 0xb87c, 0x8ffe);
++ ocp_reg_write(tp, 0xb87e, 0x0907);
++ ocp_reg_write(tp, 0xb87c, 0x80d6);
++ ocp_reg_write(tp, 0xb87e, 0x2801);
++ ocp_reg_write(tp, 0xb87c, 0x80f2);
++ ocp_reg_write(tp, 0xb87e, 0x2801);
++ ocp_reg_write(tp, 0xb87c, 0x80f4);
++ ocp_reg_write(tp, 0xb87e, 0x6077);
++ ocp_reg_write(tp, 0xb506, 0x01e7);
++
++ ocp_reg_write(tp, 0xb87c, 0x8013);
++ ocp_reg_write(tp, 0xb87e, 0x0700);
++ ocp_reg_write(tp, 0xb87c, 0x8fb9);
++ ocp_reg_write(tp, 0xb87e, 0x2801);
++ ocp_reg_write(tp, 0xb87c, 0x8fba);
++ ocp_reg_write(tp, 0xb87e, 0x0100);
++ ocp_reg_write(tp, 0xb87c, 0x8fbc);
++ ocp_reg_write(tp, 0xb87e, 0x1900);
++ ocp_reg_write(tp, 0xb87c, 0x8fbe);
++ ocp_reg_write(tp, 0xb87e, 0xe100);
++ ocp_reg_write(tp, 0xb87c, 0x8fc0);
++ ocp_reg_write(tp, 0xb87e, 0x0800);
++ ocp_reg_write(tp, 0xb87c, 0x8fc2);
++ ocp_reg_write(tp, 0xb87e, 0xe500);
++ ocp_reg_write(tp, 0xb87c, 0x8fc4);
++ ocp_reg_write(tp, 0xb87e, 0x0f00);
++ ocp_reg_write(tp, 0xb87c, 0x8fc6);
++ ocp_reg_write(tp, 0xb87e, 0xf100);
++ ocp_reg_write(tp, 0xb87c, 0x8fc8);
++ ocp_reg_write(tp, 0xb87e, 0x0400);
++ ocp_reg_write(tp, 0xb87c, 0x8fca);
++ ocp_reg_write(tp, 0xb87e, 0xf300);
++ ocp_reg_write(tp, 0xb87c, 0x8fcc);
++ ocp_reg_write(tp, 0xb87e, 0xfd00);
++ ocp_reg_write(tp, 0xb87c, 0x8fce);
++ ocp_reg_write(tp, 0xb87e, 0xff00);
++ ocp_reg_write(tp, 0xb87c, 0x8fd0);
++ ocp_reg_write(tp, 0xb87e, 0xfb00);
++ ocp_reg_write(tp, 0xb87c, 0x8fd2);
++ ocp_reg_write(tp, 0xb87e, 0x0100);
++ ocp_reg_write(tp, 0xb87c, 0x8fd4);
++ ocp_reg_write(tp, 0xb87e, 0xf400);
++ ocp_reg_write(tp, 0xb87c, 0x8fd6);
++ ocp_reg_write(tp, 0xb87e, 0xff00);
++ ocp_reg_write(tp, 0xb87c, 0x8fd8);
++ ocp_reg_write(tp, 0xb87e, 0xf600);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
++ ocp_data |= EN_XG_LIP | EN_G_LIP;
++ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
++ ocp_reg_write(tp, 0xb87c, 0x813d);
++ ocp_reg_write(tp, 0xb87e, 0x390e);
++ ocp_reg_write(tp, 0xb87c, 0x814f);
++ ocp_reg_write(tp, 0xb87e, 0x790e);
++ ocp_reg_write(tp, 0xb87c, 0x80b0);
++ ocp_reg_write(tp, 0xb87e, 0x0f31);
++ data = ocp_reg_read(tp, 0xbf4c);
++ data |= BIT(1);
++ ocp_reg_write(tp, 0xbf4c, data);
++ data = ocp_reg_read(tp, 0xbcca);
++ data |= BIT(9) | BIT(8);
++ ocp_reg_write(tp, 0xbcca, data);
++ ocp_reg_write(tp, 0xb87c, 0x8141);
++ ocp_reg_write(tp, 0xb87e, 0x320e);
++ ocp_reg_write(tp, 0xb87c, 0x8153);
++ ocp_reg_write(tp, 0xb87e, 0x720e);
++ ocp_reg_write(tp, 0xb87c, 0x8529);
++ ocp_reg_write(tp, 0xb87e, 0x050e);
++ data = ocp_reg_read(tp, OCP_EEE_CFG);
++ data &= ~CTAP_SHORT_EN;
++ ocp_reg_write(tp, OCP_EEE_CFG, data);
++
++ sram_write(tp, 0x816c, 0xc4a0);
++ sram_write(tp, 0x8170, 0xc4a0);
++ sram_write(tp, 0x8174, 0x04a0);
++ sram_write(tp, 0x8178, 0x04a0);
++ sram_write(tp, 0x817c, 0x0719);
++ sram_write(tp, 0x8ff4, 0x0400);
++ sram_write(tp, 0x8ff1, 0x0404);
++
++ ocp_reg_write(tp, 0xbf4a, 0x001b);
++ ocp_reg_write(tp, 0xb87c, 0x8033);
++ ocp_reg_write(tp, 0xb87e, 0x7c13);
++ ocp_reg_write(tp, 0xb87c, 0x8037);
++ ocp_reg_write(tp, 0xb87e, 0x7c13);
++ ocp_reg_write(tp, 0xb87c, 0x803b);
++ ocp_reg_write(tp, 0xb87e, 0xfc32);
++ ocp_reg_write(tp, 0xb87c, 0x803f);
++ ocp_reg_write(tp, 0xb87e, 0x7c13);
++ ocp_reg_write(tp, 0xb87c, 0x8043);
++ ocp_reg_write(tp, 0xb87e, 0x7c13);
++ ocp_reg_write(tp, 0xb87c, 0x8047);
++ ocp_reg_write(tp, 0xb87e, 0x7c13);
++
++ ocp_reg_write(tp, 0xb87c, 0x8145);
++ ocp_reg_write(tp, 0xb87e, 0x370e);
++ ocp_reg_write(tp, 0xb87c, 0x8157);
++ ocp_reg_write(tp, 0xb87e, 0x770e);
++ ocp_reg_write(tp, 0xb87c, 0x8169);
++ ocp_reg_write(tp, 0xb87e, 0x0d0a);
++ ocp_reg_write(tp, 0xb87c, 0x817b);
++ ocp_reg_write(tp, 0xb87e, 0x1d0a);
++
++ data = sram_read(tp, 0x8217);
++ data &= ~0xff00;
++ data |= 0x5000;
++ sram_write(tp, 0x8217, data);
++ data = sram_read(tp, 0x821a);
++ data &= ~0xff00;
++ data |= 0x5000;
++ sram_write(tp, 0x821a, data);
++ sram_write(tp, 0x80da, 0x0403);
++ data = sram_read(tp, 0x80dc);
++ data &= ~0xff00;
++ data |= 0x1000;
++ sram_write(tp, 0x80dc, data);
++ sram_write(tp, 0x80b3, 0x0384);
++ sram_write(tp, 0x80b7, 0x2007);
++ data = sram_read(tp, 0x80ba);
++ data &= ~0xff00;
++ data |= 0x6c00;
++ sram_write(tp, 0x80ba, data);
++ sram_write(tp, 0x80b5, 0xf009);
++ data = sram_read(tp, 0x80bd);
++ data &= ~0xff00;
++ data |= 0x9f00;
++ sram_write(tp, 0x80bd, data);
++ sram_write(tp, 0x80c7, 0xf083);
++ sram_write(tp, 0x80dd, 0x03f0);
++ data = sram_read(tp, 0x80df);
++ data &= ~0xff00;
++ data |= 0x1000;
++ sram_write(tp, 0x80df, data);
++ sram_write(tp, 0x80cb, 0x2007);
++ data = sram_read(tp, 0x80ce);
++ data &= ~0xff00;
++ data |= 0x6c00;
++ sram_write(tp, 0x80ce, data);
++ sram_write(tp, 0x80c9, 0x8009);
++ data = sram_read(tp, 0x80d1);
++ data &= ~0xff00;
++ data |= 0x8000;
++ sram_write(tp, 0x80d1, data);
++ sram_write(tp, 0x80a3, 0x200a);
++ sram_write(tp, 0x80a5, 0xf0ad);
++ sram_write(tp, 0x809f, 0x6073);
++ sram_write(tp, 0x80a1, 0x000b);
++ data = sram_read(tp, 0x80a9);
++ data &= ~0xff00;
++ data |= 0xc000;
++ sram_write(tp, 0x80a9, data);
++
++ if (rtl_phy_patch_request(tp, true, true))
++ return;
++
++ data = ocp_reg_read(tp, 0xb896);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xb896, data);
++ data = ocp_reg_read(tp, 0xb892);
++ data &= ~0xff00;
++ ocp_reg_write(tp, 0xb892, data);
++ ocp_reg_write(tp, 0xb88e, 0xc23e);
++ ocp_reg_write(tp, 0xb890, 0x0000);
++ ocp_reg_write(tp, 0xb88e, 0xc240);
++ ocp_reg_write(tp, 0xb890, 0x0103);
++ ocp_reg_write(tp, 0xb88e, 0xc242);
++ ocp_reg_write(tp, 0xb890, 0x0507);
++ ocp_reg_write(tp, 0xb88e, 0xc244);
++ ocp_reg_write(tp, 0xb890, 0x090b);
++ ocp_reg_write(tp, 0xb88e, 0xc246);
++ ocp_reg_write(tp, 0xb890, 0x0c0e);
++ ocp_reg_write(tp, 0xb88e, 0xc248);
++ ocp_reg_write(tp, 0xb890, 0x1012);
++ ocp_reg_write(tp, 0xb88e, 0xc24a);
++ ocp_reg_write(tp, 0xb890, 0x1416);
++ data = ocp_reg_read(tp, 0xb896);
++ data |= BIT(0);
++ ocp_reg_write(tp, 0xb896, data);
++
++ rtl_phy_patch_request(tp, false, true);
++
++ data = ocp_reg_read(tp, 0xa86a);
++ data |= BIT(0);
++ ocp_reg_write(tp, 0xa86a, data);
++ data = ocp_reg_read(tp, 0xa6f0);
++ data |= BIT(0);
++ ocp_reg_write(tp, 0xa6f0, data);
++
++ ocp_reg_write(tp, 0xbfa0, 0xd70d);
++ ocp_reg_write(tp, 0xbfa2, 0x4100);
++ ocp_reg_write(tp, 0xbfa4, 0xe868);
++ ocp_reg_write(tp, 0xbfa6, 0xdc59);
++ ocp_reg_write(tp, 0xb54c, 0x3c18);
++ data = ocp_reg_read(tp, 0xbfa4);
++ data &= ~BIT(5);
++ ocp_reg_write(tp, 0xbfa4, data);
++ data = sram_read(tp, 0x817d);
++ data |= BIT(12);
++ sram_write(tp, 0x817d, data);
++ break;
++ case RTL_VER_13:
++ /* 2.5G INRX */
++ data = ocp_reg_read(tp, 0xac46);
++ data &= ~0x00f0;
++ data |= 0x0090;
++ ocp_reg_write(tp, 0xac46, data);
++ data = ocp_reg_read(tp, 0xad30);
++ data &= ~0x0003;
++ data |= 0x0001;
++ ocp_reg_write(tp, 0xad30, data);
++ fallthrough;
++ case RTL_VER_15:
++ /* EEE parameter */
++ ocp_reg_write(tp, 0xb87c, 0x80f5);
++ ocp_reg_write(tp, 0xb87e, 0x760e);
++ ocp_reg_write(tp, 0xb87c, 0x8107);
++ ocp_reg_write(tp, 0xb87e, 0x360e);
++ ocp_reg_write(tp, 0xb87c, 0x8551);
++ data = ocp_reg_read(tp, 0xb87e);
++ data &= ~0xff00;
++ data |= 0x0800;
++ ocp_reg_write(tp, 0xb87e, data);
++
++ /* ADC_PGA parameter */
++ data = ocp_reg_read(tp, 0xbf00);
++ data &= ~0xe000;
++ data |= 0xa000;
++ ocp_reg_write(tp, 0xbf00, data);
++ data = ocp_reg_read(tp, 0xbf46);
++ data &= ~0x0f00;
++ data |= 0x0300;
++ ocp_reg_write(tp, 0xbf46, data);
++
++ /* Green Table-PGA, 1G full viterbi */
++ sram_write(tp, 0x8044, 0x2417);
++ sram_write(tp, 0x804a, 0x2417);
++ sram_write(tp, 0x8050, 0x2417);
++ sram_write(tp, 0x8056, 0x2417);
++ sram_write(tp, 0x805c, 0x2417);
++ sram_write(tp, 0x8062, 0x2417);
++ sram_write(tp, 0x8068, 0x2417);
++ sram_write(tp, 0x806e, 0x2417);
++ sram_write(tp, 0x8074, 0x2417);
++ sram_write(tp, 0x807a, 0x2417);
++
++ /* XG PLL */
++ data = ocp_reg_read(tp, 0xbf84);
++ data &= ~0xe000;
++ data |= 0xa000;
++ ocp_reg_write(tp, 0xbf84, data);
++ break;
++ default:
++ break;
++ }
++
++ if (rtl_phy_patch_request(tp, true, true))
++ return;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
++ ocp_data |= EEE_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
++
++ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
++ data &= ~(EN_EEE_100 | EN_EEE_1000);
++ data |= EN_10M_CLKDIV;
++ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
++ tp->ups_info._10m_ckdiv = true;
++ tp->ups_info.eee_plloff_100 = false;
++ tp->ups_info.eee_plloff_giga = false;
++
++ data = ocp_reg_read(tp, OCP_POWER_CFG);
++ data &= ~EEE_CLKDIV_EN;
++ ocp_reg_write(tp, OCP_POWER_CFG, data);
++ tp->ups_info.eee_ckdiv = false;
++
++ rtl_phy_patch_request(tp, false, true);
++
++ rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
++
++ data = ocp_reg_read(tp, 0xa428);
++ data &= ~BIT(9);
++ ocp_reg_write(tp, 0xa428, data);
++ data = ocp_reg_read(tp, 0xa5ea);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa5ea, data);
++ tp->ups_info.lite_mode = 0;
++
++ if (tp->eee_en)
++ rtl_eee_enable(tp, true);
++
++ r8153_aldps_en(tp, true);
++ r8152b_enable_fc(tp);
++ r8153_u2p3en(tp, true);
++
++ set_bit(PHY_RESET, &tp->flags);
++}
++
++static void r8156_init(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 data;
++ int i;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
++ ocp_data &= ~EN_ALL_SPEED;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
++
++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
++ ocp_data |= BYPASS_MAC_RESET;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
++
++ r8153b_u1u2en(tp, false);
++
++ for (i = 0; i < 500; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++ AUTOLOAD_DONE)
++ break;
++
++ msleep(20);
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++ }
++
++ data = r8153_phy_status(tp, 0);
++ if (data == PHY_STAT_EXT_INIT) {
++ data = ocp_reg_read(tp, 0xa468);
++ data &= ~(BIT(3) | BIT(1));
++ ocp_reg_write(tp, 0xa468, data);
++ }
++
++ data = r8152_mdio_read(tp, MII_BMCR);
++ if (data & BMCR_PDOWN) {
++ data &= ~BMCR_PDOWN;
++ r8152_mdio_write(tp, MII_BMCR, data);
++ }
++
++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
++ WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
++
++ r8153_u2p3en(tp, false);
++
++ /* MSC timer = 0xfff * 8ms = 32760 ms */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
++
++ /* U1/U2/L1 idle timer. 500 us */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
++
++ r8153b_power_cut_en(tp, false);
++ r8156_ups_en(tp, false);
++ r8153_queue_wake(tp, false);
++ rtl_runtime_suspend_enable(tp, false);
++
++ if (tp->udev->speed >= USB_SPEED_SUPER)
++ r8153b_u1u2en(tp, true);
++
++ usb_enable_lpm(tp->udev);
++
++ r8156_mac_clk_spd(tp, true);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
++ ocp_data &= ~PLA_MCU_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
++ if (rtl8152_get_speed(tp) & LINK_STATUS)
++ ocp_data |= CUR_LINK_OK;
++ else
++ ocp_data &= ~CUR_LINK_OK;
++ ocp_data |= POLL_LINK_CHG;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
++
++ set_bit(GREEN_ETHERNET, &tp->flags);
++
++ /* rx aggregation */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
++ ocp_data |= ACT_ODMA;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
++
++ rtl_tally_reset(tp);
++
++ tp->coalesce = 15000; /* 15 us */
++}
++
++static void r8156b_init(struct r8152 *tp)
++{
++ u32 ocp_data;
++ u16 data;
++ int i;
++
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++
++ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
++ ocp_data &= ~EN_ALL_SPEED;
++ ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
++
++ ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
++ ocp_data |= BYPASS_MAC_RESET;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
++ ocp_data |= RX_DETECT8;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
++
++ r8153b_u1u2en(tp, false);
++
++ switch (tp->version) {
++ case RTL_VER_13:
++ case RTL_VER_15:
++ r8156b_wait_loading_flash(tp);
++ break;
++ default:
++ break;
++ }
++
++ for (i = 0; i < 500; i++) {
++ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
++ AUTOLOAD_DONE)
++ break;
++
++ msleep(20);
++ if (test_bit(RTL8152_UNPLUG, &tp->flags))
++ return;
++ }
++
++ data = r8153_phy_status(tp, 0);
++ if (data == PHY_STAT_EXT_INIT) {
++ data = ocp_reg_read(tp, 0xa468);
++ data &= ~(BIT(3) | BIT(1));
++ ocp_reg_write(tp, 0xa468, data);
++
++ data = ocp_reg_read(tp, 0xa466);
++ data &= ~BIT(0);
++ ocp_reg_write(tp, 0xa466, data);
++ }
++
++ data = r8152_mdio_read(tp, MII_BMCR);
++ if (data & BMCR_PDOWN) {
++ data &= ~BMCR_PDOWN;
++ r8152_mdio_write(tp, MII_BMCR, data);
++ }
++
++ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
++
++ r8153_u2p3en(tp, false);
++
++ /* MSC timer = 0xfff * 8ms = 32760 ms */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
++
++ /* U1/U2/L1 idle timer. 500 us */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
++
++ r8153b_power_cut_en(tp, false);
++ r8156_ups_en(tp, false);
++ r8153_queue_wake(tp, false);
++ rtl_runtime_suspend_enable(tp, false);
++
++ if (tp->udev->speed >= USB_SPEED_SUPER)
++ r8153b_u1u2en(tp, true);
++
++ usb_enable_lpm(tp->udev);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
++ ocp_data &= ~SLOT_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
++ ocp_data |= FLOW_CTRL_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
++
++ /* enable fc timer and set timer to 600 ms. */
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
++ CTRL_TIMER_EN | (600 / 8));
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
++ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
++ ocp_data |= FLOW_CTRL_PATCH_2;
++ ocp_data &= ~AUTO_SPEEDUP;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
++ ocp_data |= FC_PATCH_TASK;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
++
++ r8156_mac_clk_spd(tp, true);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
++ ocp_data &= ~PLA_MCU_SPDWN_EN;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
++ if (rtl8152_get_speed(tp) & LINK_STATUS)
++ ocp_data |= CUR_LINK_OK;
++ else
++ ocp_data &= ~CUR_LINK_OK;
++ ocp_data |= POLL_LINK_CHG;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
++
++ set_bit(GREEN_ETHERNET, &tp->flags);
++
++ /* rx aggregation */
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
++ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
++ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++ rtl_tally_reset(tp);
++
++ tp->coalesce = 15000; /* 15 us */
++}
++
+ static int rtl8152_pre_reset(struct usb_interface *intf)
+ {
+ struct r8152 *tp = usb_get_intfdata(intf);
+@@ -6015,6 +7947,22 @@ int rtl8152_get_link_ksettings(struct ne
+
+ mii_ethtool_get_link_ksettings(&tp->mii, cmd);
+
++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
++ cmd->link_modes.supported, tp->support_2500full);
++
++ if (tp->support_2500full) {
++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
++ cmd->link_modes.advertising,
++ ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G);
++
++ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
++ cmd->link_modes.lp_advertising,
++ ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G);
++
++ if (is_speed_2500(rtl8152_get_speed(tp)))
++ cmd->base.speed = SPEED_2500;
++ }
++
+ mutex_unlock(&tp->control);
+
+ usb_autopm_put_interface(tp->intf);
+@@ -6058,6 +8006,10 @@ static int rtl8152_set_link_ksettings(st
+ cmd->link_modes.advertising))
+ advertising |= RTL_ADVERTISED_1000_FULL;
+
++ if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
++ cmd->link_modes.advertising))
++ advertising |= RTL_ADVERTISED_2500_FULL;
++
+ mutex_lock(&tp->control);
+
+ ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
+@@ -6647,6 +8599,67 @@ static int rtl_ops_init(struct r8152 *tp
+ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
+ break;
+
++ case RTL_VER_11:
++ tp->eee_en = true;
++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
++ fallthrough;
++ case RTL_VER_10:
++ ops->init = r8156_init;
++ ops->enable = rtl8156_enable;
++ ops->disable = rtl8153_disable;
++ ops->up = rtl8156_up;
++ ops->down = rtl8156_down;
++ ops->unload = rtl8153_unload;
++ ops->eee_get = r8153_get_eee;
++ ops->eee_set = r8152_set_eee;
++ ops->in_nway = rtl8153_in_nway;
++ ops->hw_phy_cfg = r8156_hw_phy_cfg;
++ ops->autosuspend_en = rtl8156_runtime_enable;
++ ops->change_mtu = rtl8156_change_mtu;
++ tp->rx_buf_sz = 48 * 1024;
++ tp->support_2500full = 1;
++ break;
++
++ case RTL_VER_12:
++ case RTL_VER_13:
++ tp->support_2500full = 1;
++ fallthrough;
++ case RTL_VER_15:
++ tp->eee_en = true;
++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
++ ops->init = r8156b_init;
++ ops->enable = rtl8156b_enable;
++ ops->disable = rtl8153_disable;
++ ops->up = rtl8156_up;
++ ops->down = rtl8156_down;
++ ops->unload = rtl8153_unload;
++ ops->eee_get = r8153_get_eee;
++ ops->eee_set = r8152_set_eee;
++ ops->in_nway = rtl8153_in_nway;
++ ops->hw_phy_cfg = r8156b_hw_phy_cfg;
++ ops->autosuspend_en = rtl8156_runtime_enable;
++ ops->change_mtu = rtl8156_change_mtu;
++ tp->rx_buf_sz = 48 * 1024;
++ break;
++
++ case RTL_VER_14:
++ ops->init = r8153c_init;
++ ops->enable = rtl8153_enable;
++ ops->disable = rtl8153_disable;
++ ops->up = rtl8153c_up;
++ ops->down = rtl8153b_down;
++ ops->unload = rtl8153_unload;
++ ops->eee_get = r8153_get_eee;
++ ops->eee_set = r8152_set_eee;
++ ops->in_nway = rtl8153_in_nway;
++ ops->hw_phy_cfg = r8153c_hw_phy_cfg;
++ ops->autosuspend_en = rtl8153c_runtime_enable;
++ ops->change_mtu = rtl8153c_change_mtu;
++ tp->rx_buf_sz = 32 * 1024;
++ tp->eee_en = true;
++ tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
++ break;
++
+ default:
+ ret = -ENODEV;
+ dev_err(&tp->intf->dev, "Unknown Device\n");
+@@ -6660,11 +8673,13 @@ static int rtl_ops_init(struct r8152 *tp
+ #define FIRMWARE_8153A_3 "rtl_nic/rtl8153a-3.fw"
+ #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
+ #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
++#define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
+
+ MODULE_FIRMWARE(FIRMWARE_8153A_2);
+ MODULE_FIRMWARE(FIRMWARE_8153A_3);
+ MODULE_FIRMWARE(FIRMWARE_8153A_4);
+ MODULE_FIRMWARE(FIRMWARE_8153B_2);
++MODULE_FIRMWARE(FIRMWARE_8153C_1);
+
+ static int rtl_fw_init(struct r8152 *tp)
+ {
+@@ -6690,6 +8705,11 @@ static int rtl_fw_init(struct r8152 *tp)
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
+ rtl_fw->post_fw = r8153b_post_firmware_1;
+ break;
++ case RTL_VER_14:
++ rtl_fw->fw_name = FIRMWARE_8153C_1;
++ rtl_fw->pre_fw = r8153b_pre_firmware_1;
++ rtl_fw->post_fw = r8153c_post_firmware_1;
++ break;
+ default:
+ break;
+ }
+@@ -6745,6 +8765,27 @@ u8 rtl8152_get_version(struct usb_interf
+ case 0x6010:
+ version = RTL_VER_09;
+ break;
++ case 0x7010:
++ version = RTL_TEST_01;
++ break;
++ case 0x7020:
++ version = RTL_VER_10;
++ break;
++ case 0x7030:
++ version = RTL_VER_11;
++ break;
++ case 0x7400:
++ version = RTL_VER_12;
++ break;
++ case 0x7410:
++ version = RTL_VER_13;
++ break;
++ case 0x6400:
++ version = RTL_VER_14;
++ break;
++ case 0x7420:
++ version = RTL_VER_15;
++ break;
+ default:
+ version = RTL_VER_UNKNOWN;
+ dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
+@@ -6857,12 +8898,29 @@ static int rtl8152_probe(struct usb_inte
+ /* MTU range: 68 - 1500 or 9194 */
+ netdev->min_mtu = ETH_MIN_MTU;
+ switch (tp->version) {
++ case RTL_VER_03:
++ case RTL_VER_04:
++ case RTL_VER_05:
++ case RTL_VER_06:
++ case RTL_VER_08:
++ case RTL_VER_09:
++ case RTL_VER_14:
++ netdev->max_mtu = size_to_mtu(9 * 1024);
++ break;
++ case RTL_VER_10:
++ case RTL_VER_11:
++ netdev->max_mtu = size_to_mtu(15 * 1024);
++ break;
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ netdev->max_mtu = size_to_mtu(16 * 1024);
++ break;
+ case RTL_VER_01:
+ case RTL_VER_02:
+- netdev->max_mtu = ETH_DATA_LEN;
+- break;
++ case RTL_VER_07:
+ default:
+- netdev->max_mtu = size_to_mtu(9 * 1024);
++ netdev->max_mtu = ETH_DATA_LEN;
+ break;
+ }
+
+@@ -6878,7 +8936,13 @@ static int rtl8152_probe(struct usb_inte
+ tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
+ RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
+ if (tp->mii.supports_gmii) {
+- tp->speed = SPEED_1000;
++ if (tp->support_2500full &&
++ tp->udev->speed >= USB_SPEED_SUPER) {
++ tp->speed = SPEED_2500;
++ tp->advertising |= RTL_ADVERTISED_2500_FULL;
++ } else {
++ tp->speed = SPEED_1000;
++ }
+ tp->advertising |= RTL_ADVERTISED_1000_FULL;
+ }
+ tp->duplex = DUPLEX_FULL;
+@@ -6902,7 +8966,11 @@ static int rtl8152_probe(struct usb_inte
+ set_ethernet_addr(tp);
+
+ usb_set_intfdata(intf, tp);
+- netif_napi_add(netdev, &tp->napi, r8152_poll, RTL8152_NAPI_WEIGHT);
++
++ if (tp->support_2500full)
++ netif_napi_add(netdev, &tp->napi, r8152_poll, 256);
++ else
++ netif_napi_add(netdev, &tp->napi, r8152_poll, 64);
+
+ ret = register_netdev(netdev);
+ if (ret != 0) {
+@@ -6938,7 +9006,8 @@ static void rtl8152_disconnect(struct us
+ unregister_netdev(tp->netdev);
+ tasklet_kill(&tp->tx_tl);
+ cancel_delayed_work_sync(&tp->hw_phy_work);
+- tp->rtl_ops.unload(tp);
++ if (tp->rtl_ops.unload)
++ tp->rtl_ops.unload(tp);
+ rtl8152_release_firmware(tp);
+ free_netdev(tp->netdev);
+ }
+@@ -6958,13 +9027,28 @@ static void rtl8152_disconnect(struct us
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
++ .bInterfaceProtocol = USB_CDC_PROTO_NONE \
++}, \
++{ \
++ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \
++ USB_DEVICE_ID_MATCH_DEVICE, \
++ .idVendor = (vend), \
++ .idProduct = (prod), \
++ .bInterfaceClass = USB_CLASS_COMM, \
++ .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+ /* table of devices that work with this driver */
+ static const struct usb_device_id rtl8152_table[] = {
++ /* Realtek */
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050)},
++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155)},
++ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156)},
++
++ /* Microsoft */
+ {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
--- /dev/null
+From ca09589a72a0aa17389754fb75a5cd1a5d46818f Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:36 +0800
+Subject: [PATCH] r8152: support PHY firmware for RTL8156 series
+
+commit 4a51b0e8a0143b0e83d51d9c58c6416c3818a9f2 upstream.
+
+Support new firmware type and method for RTL8156 series.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 563 +++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 561 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -975,8 +975,60 @@ enum rtl8152_fw_flags {
+ FW_FLAGS_START,
+ FW_FLAGS_STOP,
+ FW_FLAGS_NC,
++ FW_FLAGS_NC1,
++ FW_FLAGS_NC2,
++ FW_FLAGS_UC2,
++ FW_FLAGS_UC,
++ FW_FLAGS_SPEED_UP,
++ FW_FLAGS_VER,
+ };
+
++enum rtl8152_fw_fixup_cmd {
++ FW_FIXUP_AND = 0,
++ FW_FIXUP_OR,
++ FW_FIXUP_NOT,
++ FW_FIXUP_XOR,
++};
++
++struct fw_phy_set {
++ __le16 addr;
++ __le16 data;
++} __packed;
++
++struct fw_phy_speed_up {
++ struct fw_block blk_hdr;
++ __le16 fw_offset;
++ __le16 version;
++ __le16 fw_reg;
++ __le16 reserved;
++ char info[];
++} __packed;
++
++struct fw_phy_ver {
++ struct fw_block blk_hdr;
++ struct fw_phy_set ver;
++ __le32 reserved;
++} __packed;
++
++struct fw_phy_fixup {
++ struct fw_block blk_hdr;
++ struct fw_phy_set setting;
++ __le16 bit_cmd;
++ __le16 reserved;
++} __packed;
++
++struct fw_phy_union {
++ struct fw_block blk_hdr;
++ __le16 fw_offset;
++ __le16 fw_reg;
++ struct fw_phy_set pre_set[2];
++ struct fw_phy_set bp[8];
++ struct fw_phy_set bp_en;
++ u8 pre_num;
++ u8 bp_num;
++ char info[];
++} __packed;
++
+ /**
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ * The layout of the firmware block is:
+@@ -1081,6 +1133,15 @@ enum rtl_fw_type {
+ RTL_FW_PHY_START,
+ RTL_FW_PHY_STOP,
+ RTL_FW_PHY_NC,
++ RTL_FW_PHY_FIXUP,
++ RTL_FW_PHY_UNION_NC,
++ RTL_FW_PHY_UNION_NC1,
++ RTL_FW_PHY_UNION_NC2,
++ RTL_FW_PHY_UNION_UC2,
++ RTL_FW_PHY_UNION_UC,
++ RTL_FW_PHY_UNION_MISC,
++ RTL_FW_PHY_SPEED_UP,
++ RTL_FW_PHY_VER,
+ };
+
+ enum rtl_version {
+@@ -4000,6 +4061,162 @@ static int rtl_post_ram_code(struct r815
+ return 0;
+ }
+
++static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
++{
++ u16 fw_offset;
++ u32 length;
++ bool rc = false;
++
++ switch (tp->version) {
++ case RTL_VER_01:
++ case RTL_VER_02:
++ case RTL_VER_03:
++ case RTL_VER_04:
++ case RTL_VER_05:
++ case RTL_VER_06:
++ case RTL_VER_07:
++ case RTL_VER_08:
++ case RTL_VER_09:
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_14:
++ goto out;
++ case RTL_VER_13:
++ case RTL_VER_15:
++ default:
++ break;
++ }
++
++ fw_offset = __le16_to_cpu(phy->fw_offset);
++ length = __le32_to_cpu(phy->blk_hdr.length);
++ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
++ dev_err(&tp->intf->dev, "invalid fw_offset\n");
++ goto out;
++ }
++
++ length -= fw_offset;
++ if (length & 3) {
++ dev_err(&tp->intf->dev, "invalid block length\n");
++ goto out;
++ }
++
++ if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
++ dev_err(&tp->intf->dev, "invalid register to load firmware\n");
++ goto out;
++ }
++
++ rc = true;
++out:
++ return rc;
++}
++
++static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
++{
++ bool rc = false;
++
++ switch (tp->version) {
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ break;
++ default:
++ goto out;
++ }
++
++ if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
++ dev_err(&tp->intf->dev, "invalid block length\n");
++ goto out;
++ }
++
++ if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
++ dev_err(&tp->intf->dev, "invalid phy ver addr\n");
++ goto out;
++ }
++
++ rc = true;
++out:
++ return rc;
++}
++
++static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
++{
++ bool rc = false;
++
++ switch (tp->version) {
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ break;
++ default:
++ goto out;
++ }
++
++ if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
++ dev_err(&tp->intf->dev, "invalid block length\n");
++ goto out;
++ }
++
++ if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
++ __le16_to_cpu(fix->setting.data) != BIT(7)) {
++ dev_err(&tp->intf->dev, "invalid phy fixup\n");
++ goto out;
++ }
++
++ rc = true;
++out:
++ return rc;
++}
++
++static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
++{
++ u16 fw_offset;
++ u32 length;
++ bool rc = false;
++
++ switch (tp->version) {
++ case RTL_VER_10:
++ case RTL_VER_11:
++ case RTL_VER_12:
++ case RTL_VER_13:
++ case RTL_VER_15:
++ break;
++ default:
++ goto out;
++ }
++
++ fw_offset = __le16_to_cpu(phy->fw_offset);
++ length = __le32_to_cpu(phy->blk_hdr.length);
++ if (fw_offset < sizeof(*phy) || length <= fw_offset) {
++ dev_err(&tp->intf->dev, "invalid fw_offset\n");
++ goto out;
++ }
++
++ length -= fw_offset;
++ if (length & 1) {
++ dev_err(&tp->intf->dev, "invalid block length\n");
++ goto out;
++ }
++
++ if (phy->pre_num > 2) {
++ dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
++ goto out;
++ }
++
++ if (phy->bp_num > 8) {
++ dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
++ goto out;
++ }
++
++ rc = true;
++out:
++ return rc;
++}
++
+ static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
+ {
+ u32 length;
+@@ -4320,6 +4537,10 @@ static long rtl8152_check_firmware(struc
+ case RTL_FW_PHY_START:
+ if (test_bit(FW_FLAGS_START, &fw_flags) ||
+ test_bit(FW_FLAGS_NC, &fw_flags) ||
++ test_bit(FW_FLAGS_NC1, &fw_flags) ||
++ test_bit(FW_FLAGS_NC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
+ test_bit(FW_FLAGS_STOP, &fw_flags)) {
+ dev_err(&tp->intf->dev,
+ "check PHY_START fail\n");
+@@ -4368,7 +4589,153 @@ static long rtl8152_check_firmware(struc
+ goto fail;
+ }
+ __set_bit(FW_FLAGS_NC, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_NC:
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_NC1, &fw_flags) ||
++ test_bit(FW_FLAGS_NC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_NC, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
++ goto fail;
++ }
+
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_NC, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_NC1:
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_NC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_NC1, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_NC2:
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_UC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_NC2, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_UC2:
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_UC2, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_UC:
++ if (!test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_UC, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_UC, &fw_flags);
++ break;
++ case RTL_FW_PHY_UNION_MISC:
++ if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
++ dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
++ goto fail;
++ }
++ break;
++ case RTL_FW_PHY_FIXUP:
++ if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
++ dev_err(&tp->intf->dev, "check PHY fixup failed\n");
++ goto fail;
++ }
++ break;
++ case RTL_FW_PHY_SPEED_UP:
++ if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
++ dev_err(&tp->intf->dev, "check PHY speed up failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
++ break;
++ case RTL_FW_PHY_VER:
++ if (test_bit(FW_FLAGS_START, &fw_flags) ||
++ test_bit(FW_FLAGS_NC, &fw_flags) ||
++ test_bit(FW_FLAGS_NC1, &fw_flags) ||
++ test_bit(FW_FLAGS_NC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC2, &fw_flags) ||
++ test_bit(FW_FLAGS_UC, &fw_flags) ||
++ test_bit(FW_FLAGS_STOP, &fw_flags)) {
++ dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
++ goto fail;
++ }
++
++ if (test_bit(FW_FLAGS_VER, &fw_flags)) {
++ dev_err(&tp->intf->dev, "multiple PHY version encountered");
++ goto fail;
++ }
++
++ if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
++ dev_err(&tp->intf->dev, "check PHY version failed\n");
++ goto fail;
++ }
++ __set_bit(FW_FLAGS_VER, &fw_flags);
+ break;
+ default:
+ dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
+@@ -4391,6 +4758,143 @@ fail:
+ return ret;
+ }
+
++static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
++{
++ u32 len;
++ u8 *data;
++
++ if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
++ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
++ return;
++ }
++
++ len = __le32_to_cpu(phy->blk_hdr.length);
++ len -= __le16_to_cpu(phy->fw_offset);
++ data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
++
++ if (rtl_phy_patch_request(tp, true, wait))
++ return;
++
++ while (len) {
++ u32 ocp_data, size;
++ int i;
++
++ if (len < 2048)
++ size = len;
++ else
++ size = 2048;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
++ ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
++
++ generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
++
++ data += size;
++ len -= size;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
++ ocp_data |= POL_GPHY_PATCH;
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
++
++ for (i = 0; i < 1000; i++) {
++ if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
++ break;
++ }
++
++ if (i == 1000) {
++ dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
++ return;
++ }
++ }
++
++ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
++ rtl_phy_patch_request(tp, false, wait);
++
++ if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
++ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
++ else
++ dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
++}
++
++static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
++{
++ u16 ver_addr, ver;
++
++ ver_addr = __le16_to_cpu(phy_ver->ver.addr);
++ ver = __le16_to_cpu(phy_ver->ver.data);
++
++ if (sram_read(tp, ver_addr) >= ver) {
++ dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
++ return 0;
++ }
++
++ sram_write(tp, ver_addr, ver);
++
++ dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
++
++ return ver;
++}
++
++static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
++{
++ u16 addr, data;
++
++ addr = __le16_to_cpu(fix->setting.addr);
++ data = ocp_reg_read(tp, addr);
++
++ switch (__le16_to_cpu(fix->bit_cmd)) {
++ case FW_FIXUP_AND:
++ data &= __le16_to_cpu(fix->setting.data);
++ break;
++ case FW_FIXUP_OR:
++ data |= __le16_to_cpu(fix->setting.data);
++ break;
++ case FW_FIXUP_NOT:
++ data &= ~__le16_to_cpu(fix->setting.data);
++ break;
++ case FW_FIXUP_XOR:
++ data ^= __le16_to_cpu(fix->setting.data);
++ break;
++ default:
++ return;
++ }
++
++ ocp_reg_write(tp, addr, data);
++
++ dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
++}
++
++static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
++{
++ __le16 *data;
++ u32 length;
++ int i, num;
++
++ num = phy->pre_num;
++ for (i = 0; i < num; i++)
++ sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
++ __le16_to_cpu(phy->pre_set[i].data));
++
++ length = __le32_to_cpu(phy->blk_hdr.length);
++ length -= __le16_to_cpu(phy->fw_offset);
++ num = length / 2;
++ data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
++
++ ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
++ for (i = 0; i < num; i++)
++ ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
++
++ num = phy->bp_num;
++ for (i = 0; i < num; i++)
++ sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
++
++ if (phy->bp_num && phy->bp_en.addr)
++ sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
++
++ dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
++}
++
+ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
+ {
+ u16 mode_reg, bp_index;
+@@ -4444,6 +4948,12 @@ static void rtl8152_fw_mac_apply(struct
+ return;
+ }
+
++ fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
++ if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
++ dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
++ return;
++ }
++
+ rtl_clear_bp(tp, type);
+
+ /* Enable backup/restore of MACDBG. This is required after clearing PLA
+@@ -4479,7 +4989,6 @@ static void rtl8152_fw_mac_apply(struct
+ ocp_write_word(tp, type, bp_en_addr,
+ __le16_to_cpu(mac->bp_en_value));
+
+- fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
+ if (fw_ver_reg)
+ ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
+ mac->fw_ver_data);
+@@ -4494,7 +5003,7 @@ static void rtl8152_apply_firmware(struc
+ struct fw_header *fw_hdr;
+ struct fw_phy_patch_key *key;
+ u16 key_addr = 0;
+- int i;
++ int i, patch_phy = 1;
+
+ if (IS_ERR_OR_NULL(rtl_fw->fw))
+ return;
+@@ -4516,17 +5025,40 @@ static void rtl8152_apply_firmware(struc
+ rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
+ break;
+ case RTL_FW_PHY_START:
++ if (!patch_phy)
++ break;
+ key = (struct fw_phy_patch_key *)block;
+ key_addr = __le16_to_cpu(key->key_reg);
+ rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
+ break;
+ case RTL_FW_PHY_STOP:
++ if (!patch_phy)
++ break;
+ WARN_ON(!key_addr);
+ rtl_post_ram_code(tp, key_addr, !power_cut);
+ break;
+ case RTL_FW_PHY_NC:
+ rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
+ break;
++ case RTL_FW_PHY_VER:
++ patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
++ break;
++ case RTL_FW_PHY_UNION_NC:
++ case RTL_FW_PHY_UNION_NC1:
++ case RTL_FW_PHY_UNION_NC2:
++ case RTL_FW_PHY_UNION_UC2:
++ case RTL_FW_PHY_UNION_UC:
++ case RTL_FW_PHY_UNION_MISC:
++ if (patch_phy)
++ rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
++ break;
++ case RTL_FW_PHY_FIXUP:
++ if (patch_phy)
++ rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
++ break;
++ case RTL_FW_PHY_SPEED_UP:
++ rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
++ break;
+ default:
+ break;
+ }
+@@ -5034,6 +5566,21 @@ static int r8153c_post_firmware_1(struct
+ return 0;
+ }
+
++static int r8156a_post_firmware_1(struct r8152 *tp)
++{
++ u32 ocp_data;
++
++ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
++ ocp_data |= FW_IP_RESET_EN;
++ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
++
++ /* Modify U3PHY parameter for compatibility issue */
++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
++ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
++
++ return 0;
++}
++
+ static void r8153_aldps_en(struct r8152 *tp, bool enable)
+ {
+ u16 data;
+@@ -8674,12 +9221,16 @@ static int rtl_ops_init(struct r8152 *tp
+ #define FIRMWARE_8153A_4 "rtl_nic/rtl8153a-4.fw"
+ #define FIRMWARE_8153B_2 "rtl_nic/rtl8153b-2.fw"
+ #define FIRMWARE_8153C_1 "rtl_nic/rtl8153c-1.fw"
++#define FIRMWARE_8156A_2 "rtl_nic/rtl8156a-2.fw"
++#define FIRMWARE_8156B_2 "rtl_nic/rtl8156b-2.fw"
+
+ MODULE_FIRMWARE(FIRMWARE_8153A_2);
+ MODULE_FIRMWARE(FIRMWARE_8153A_3);
+ MODULE_FIRMWARE(FIRMWARE_8153A_4);
+ MODULE_FIRMWARE(FIRMWARE_8153B_2);
+ MODULE_FIRMWARE(FIRMWARE_8153C_1);
++MODULE_FIRMWARE(FIRMWARE_8156A_2);
++MODULE_FIRMWARE(FIRMWARE_8156B_2);
+
+ static int rtl_fw_init(struct r8152 *tp)
+ {
+@@ -8705,6 +9256,14 @@ static int rtl_fw_init(struct r8152 *tp)
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
+ rtl_fw->post_fw = r8153b_post_firmware_1;
+ break;
++ case RTL_VER_11:
++ rtl_fw->fw_name = FIRMWARE_8156A_2;
++ rtl_fw->post_fw = r8156a_post_firmware_1;
++ break;
++ case RTL_VER_13:
++ case RTL_VER_15:
++ rtl_fw->fw_name = FIRMWARE_8156B_2;
++ break;
+ case RTL_VER_14:
+ rtl_fw->fw_name = FIRMWARE_8153C_1;
+ rtl_fw->pre_fw = r8153b_pre_firmware_1;
--- /dev/null
+From 579f58dd2819910354753bc5489fc1588fe9cfe2 Mon Sep 17 00:00:00 2001
+From: Hayes Wang <hayeswang@realtek.com>
+Date: Fri, 16 Apr 2021 16:04:37 +0800
+Subject: [PATCH] r8152: search the configuration of vendor mode
+
+commit c2198943e33b100ed21dfb636c8fa6baef841e9d upstream.
+
+The vendor mode is not always at config #1, so it is necessary to
+set the correct configuration number.
+
+Signed-off-by: Hayes Wang <hayeswang@realtek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/usb/r8152.c | 39 +++++++++++++++++++++++++++++++++++----
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -30,7 +30,7 @@
+ #include <linux/usb/r8152.h>
+
+ /* Information for net-next */
+-#define NETNEXT_VERSION "11"
++#define NETNEXT_VERSION "12"
+
+ /* Information for net */
+ #define NET_VERSION "11"
+@@ -8131,6 +8131,39 @@ static void r8156b_init(struct r8152 *tp
+ tp->coalesce = 15000; /* 15 us */
+ }
+
++static bool rtl_vendor_mode(struct usb_interface *intf)
++{
++ struct usb_host_interface *alt = intf->cur_altsetting;
++ struct usb_device *udev;
++ struct usb_host_config *c;
++ int i, num_configs;
++
++ if (alt->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC)
++ return true;
++
++ /* The vendor mode is not always config #1, so to find it out. */
++ udev = interface_to_usbdev(intf);
++ c = udev->config;
++ num_configs = udev->descriptor.bNumConfigurations;
++ for (i = 0; i < num_configs; (i++, c++)) {
++ struct usb_interface_descriptor *desc = NULL;
++
++ if (c->desc.bNumInterfaces > 0)
++ desc = &c->intf_cache[0]->altsetting->desc;
++ else
++ continue;
++
++ if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
++ usb_driver_set_configuration(udev, c->desc.bConfigurationValue);
++ break;
++ }
++ }
++
++ WARN_ON_ONCE(i == num_configs);
++
++ return false;
++}
++
+ static int rtl8152_pre_reset(struct usb_interface *intf)
+ {
+ struct r8152 *tp = usb_get_intfdata(intf);
+@@ -9369,10 +9402,8 @@ static int rtl8152_probe(struct usb_inte
+ if (version == RTL_VER_UNKNOWN)
+ return -ENODEV;
+
+- if (udev->actconfig->desc.bConfigurationValue != 1) {
+- usb_driver_set_configuration(udev, 1);
++ if (!rtl_vendor_mode(intf))
+ return -ENODEV;
+- }
+
+ if (intf->cur_altsetting->desc.bNumEndpoints < 3)
+ return -ENODEV;