--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 7412";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+
+ led-dsl = &info;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power_green {
+ label = "fritz7412:green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ power_red: power_red {
+ label = "fritz7412:red:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ fon {
+ label = "fritz7412:green:fon";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ dect {
+ label = "fritz7412:green:dect";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi: wifi {
+ label = "fritz7412:green:wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ info: info {
+ label = "fritz7412:green:info";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&localbus {
+ nand@0 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ lantiq,cs = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "urlader";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "nand-tffs";
+ reg = <0x40000 0x400000>;
+ read-only;
+ };
+
+ partition@440000 {
+ label = "kernel";
+ reg = <0x440000 0x400000>;
+ };
+
+ partition@840000 {
+ label = "ubi";
+ reg = <0x840000 0x3000000>;
+ };
+
+ partition@3840000 {
+ label = "reserved-kernel";
+ reg = <0x3840000 0x400000>;
+ read-only;
+ };
+
+ partition@3c40000 {
+ label = "reserved-filesystem";
+ reg = <0x3c40000 0x3000000>;
+ read-only;
+ };
+
+ partition@6c40000 {
+ label = "config";
+ reg = <0x6c40000 0x400000>;
+ read-only;
+ };
+
+ partition@6e40000 {
+ label = "nand-filesystem";
+ reg = <0x6e40000 0x400000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+
+ wifi@168c,002e {
+ compatible = "pci168c,002e";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ pcie-rst {
+ lantiq,pins = "io11";
+ lantiq,open-drain = <1>;
+ lantiq,output = <1>;
+ };
+ nand-mux {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd", "nand cs1",
+ "nand rdy";
+ lantiq,function = "ebu";
+ };
+ nand-pins {
+ lantiq,pins = "io13", "io24", "io49";
+ lantiq,pull = <1>;
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+ð0 {
+ lantiq,phys = <&gphy0>;
+
+ interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&vmmc {
+ status = "okay";
+};
projects / openwrt / staging / hauke.git / commitdiff