-/* Copyright (C) 2010 - 2013 UNISYS CORPORATION */
+/* Copyright (C) 2010 - 2016 UNISYS CORPORATION */
/* All rights reserved. */
#ifndef __IOCHANNEL_H__
#define __IOCHANNEL_H__
/*
* Everything needed for IOPart-GuestPart communication is define in
- * this file. Note: Everything is OS-independent because this file is
+ * this file. Note: Everything is OS-independent because this file is
* used by Windows, Linux and possible EFI drivers.
*/
/*
* Communication flow between the IOPart and GuestPart uses the channel headers
- * channel state. The following states are currently being used:
+ * channel state. The following states are currently being used:
* UNINIT(All Zeroes), CHANNEL_ATTACHING, CHANNEL_ATTACHED, CHANNEL_OPENED
*
- * additional states will be used later. No locking is needed to switch between
+ * Additional states will be used later. No locking is needed to switch between
* states due to the following rules:
*
* 1. IOPart is only the only partition allowed to change from UNIT
#define ULTRA_VSWITCH_CHANNEL_PROTOCOL_SIGNATURE \
ULTRA_CHANNEL_PROTOCOL_SIGNATURE
-/* Must increment these whenever you insert or delete fields within this channel
- * struct. Also increment whenever you change the meaning of fields within this
- * channel struct so as to break pre-existing software. Note that you can
- * usually add fields to the END of the channel struct withOUT needing to
+/*
+ * Must increment these whenever you insert or delete fields within this channel
+ * struct. Also increment whenever you change the meaning of fields within this
+ * channel struct so as to break pre-existing software. Note that you can
+ * usually add fields to the END of the channel struct without needing to
* increment this.
*/
#define ULTRA_VHBA_CHANNEL_PROTOCOL_VERSIONID 2
#define MINNUM(a, b) (((a) < (b)) ? (a) : (b))
#define MAXNUM(a, b) (((a) > (b)) ? (a) : (b))
-/* define the two queues per data channel between iopart and ioguestparts */
-/* used by ioguestpart to 'insert' signals to iopart */
+/* Define the two queues per data channel between iopart and ioguestparts. */
+/* Used by ioguestpart to 'insert' signals to iopart. */
#define IOCHAN_TO_IOPART 0
-/* used by ioguestpart to 'remove' signals from iopart, same previous queue */
+/* Used by ioguestpart to 'remove' signals from iopart, same previous queue. */
#define IOCHAN_FROM_IOPART 1
-/* size of cdb - i.e., scsi cmnd */
+/* Size of cdb - i.e., SCSI cmnd */
#define MAX_CMND_SIZE 16
#define MAX_SENSE_SIZE 64
#define MAX_PHYS_INFO 64
-/* various types of network packets that can be sent in cmdrsp */
+/* Various types of network packets that can be sent in cmdrsp. */
enum net_types {
- NET_RCV_POST = 0, /* submit buffer to hold receiving
+ NET_RCV_POST = 0, /*
+ * Submit buffer to hold receiving
* incoming packet
*/
- /* virtnic -> uisnic */
+ /* visornic -> uisnic */
NET_RCV, /* incoming packet received */
/* uisnic -> virtpci */
NET_XMIT, /* for outgoing net packets */
- /* virtnic -> uisnic */
+ /* visornic -> uisnic */
NET_XMIT_DONE, /* outgoing packet xmitted */
/* uisnic -> virtpci */
NET_RCV_ENBDIS, /* enable/disable packet reception */
- /* virtnic -> uisnic */
+ /* visornic -> uisnic */
NET_RCV_ENBDIS_ACK, /* acknowledge enable/disable packet */
/* reception */
- /* uisnic -> virtnic */
+ /* uisnic -> visornic */
NET_RCV_PROMISC, /* enable/disable promiscuous mode */
- /* virtnic -> uisnic */
- NET_CONNECT_STATUS, /* indicate the loss or restoration of a network
+ /* visornic -> uisnic */
+ NET_CONNECT_STATUS, /*
+ * indicate the loss or restoration of a network
* connection
*/
- /* uisnic -> virtnic */
- NET_MACADDR, /* indicates the client has requested to update
- * its MAC addr
+ /* uisnic -> visornic */
+ NET_MACADDR, /*
+ * Indicates the client has requested to update
+ * it's MAC address
*/
- NET_MACADDR_ACK, /* MAC address */
+ NET_MACADDR_ACK, /* MAC address acknowledge */
};
#ifndef MAX_MACADDR_LEN
#define MAX_MACADDR_LEN 6 /* number of bytes in MAC address */
-#endif /* MAX_MACADDR_LEN */
+#endif
-/* various types of scsi task mgmt commands */
+/* Various types of scsi task mgmt commands. */
enum task_mgmt_types {
TASK_MGMT_ABORT_TASK = 1,
TASK_MGMT_BUS_RESET,
TASK_MGMT_TARGET_RESET,
};
-/* various types of vdisk mgmt commands */
+/* Various types of vdisk mgmt commands. */
enum vdisk_mgmt_types {
VDISK_MGMT_ACQUIRE = 1,
VDISK_MGMT_RELEASE,
#define MIN_NUMSIGNALS 64
-/* structs with pragma pack */
+/* Structs with pragma pack. */
struct guest_phys_info {
u64 address;
#define GPI_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(struct guest_phys_info))
struct uisscsi_dest {
- u32 channel; /* channel == bus number */
- u32 id; /* id == target number */
- u32 lun; /* lun == logical unit number */
+ u32 channel; /* channel == bus number */
+ u32 id; /* id == target number */
+ u32 lun; /* lun == logical unit number */
} __packed;
struct vhba_wwnn {
u32 wwnn2;
} __packed;
-/* WARNING: Values stired in this structure must contain maximum counts (not
+/*
+ * WARNING: Values stired in this structure must contain maximum counts (not
* maximum values).
*/
struct vhba_config_max {/* 20 bytes */
* information for each
* fragment
*/
- enum dma_data_direction data_dir; /* direction of the data, if any */
+ enum dma_data_direction data_dir; /* direction of the data, if any */
struct uisscsi_dest vdest; /* identifies the virtual hba, id, */
/* channel, lun to which cmd was sent */
- /* Needed to queue the rsp back to cmd originator */
- int linuxstat; /* original Linux status used by linux vdisk */
+ /* Needed to queue the rsp back to cmd originator. */
+ int linuxstat; /* original Linux status used by Linux vdisk */
u8 scsistat; /* the scsi status */
u8 addlstat; /* non-scsi status */
#define ADDL_SEL_TIMEOUT 4
- /* the following fields are need to determine the result of command */
+ /* The following fields are need to determine the result of command. */
u8 sensebuf[MAX_SENSE_SIZE]; /* sense info in case cmd failed; */
- /* it holds the sense_data struct; */
- /* see that struct for details. */
- void *vdisk; /* pointer to the vdisk to clean up when IO completes. */
+ /* sensebuf holds the sense_data struct; */
+ /* See sense_data struct for more details. */
+ void *vdisk; /* Pointer to the vdisk to clean up when IO completes. */
int no_disk_result;
- /* used to return no disk inquiry result
+ /*
+ * Used to return no disk inquiry result
* when no_disk_result is set to 1,
* scsi.scsistat is SAM_STAT_GOOD
* scsi.addlstat is 0
*/
} __packed;
-/* Defines to support sending correct inquiry result when no disk is
+/*
+ * Defines to support sending correct inquiry result when no disk is
* configured.
*/
-/* From SCSI SPC2 -
+/*
+ * From SCSI SPC2 -
*
* If the target is not capable of supporting a device on this logical unit, the
* device server shall set this field to 7Fh (PERIPHERAL QUALIFIER set to 011b
* and PERIPHERAL DEVICE TYPE set to 1Fh).
*
- *The device server is capable of supporting the specified peripheral device
- *type on this logical unit. However, the physical device is not currently
- *connected to this logical unit.
+ * The device server is capable of supporting the specified peripheral device
+ * type on this logical unit. However, the physical device is not currently
+ * connected to this logical unit.
*/
-#define DEV_NOT_CAPABLE 0x7f /* peripheral qualifier of 0x3 */
- /* peripheral type of 0x1f */
- /* specifies no device but target present */
+#define DEV_NOT_CAPABLE 0x7f /*
+ * peripheral qualifier of 0x3
+ * peripheral type of 0x1f
+ * specifies no device but target present
+ */
-#define DEV_DISK_CAPABLE_NOT_PRESENT 0x20 /* peripheral qualifier of 0x1 */
- /* peripheral type of 0 - disk */
- /* specifies device capable, but not present */
+#define DEV_DISK_CAPABLE_NOT_PRESENT 0x20 /* peripheral qualifier of 0x1
+ * peripheral type of 0 - disk
+ * Specifies device capable, but
+ * not present
+ */
-#define DEV_HISUPPORT 0x10 /* HiSup = 1; shows support for report luns */
- /* must be returned for lun 0. */
+#define DEV_HISUPPORT 0x10 /*
+ * HiSup = 1; shows support for report luns
+ * must be returned for lun 0.
+ */
-/* NOTE: Linux code assumes inquiry contains 36 bytes. Without checking length
- * in buf[4] some linux code accesses bytes beyond 5 to retrieve vendor, product
- * & revision. Yikes! So let us always send back 36 bytes, the minimum for
+/*
+ * NOTE: Linux code assumes inquiry contains 36 bytes. Without checking length
+ * in buf[4] some Linux code accesses bytes beyond 5 to retrieve vendor, product
+ * and revision. Yikes! So let us always send back 36 bytes, the minimum for
* inquiry result.
*/
#define NO_DISK_INQUIRY_RESULT_LEN 36
#define MIN_INQUIRY_RESULT_LEN 5 /* 5 bytes minimum for inquiry result */
/* SCSI device version for no disk inquiry result */
-#define SCSI_SPC2_VER 4 /* indicates SCSI SPC2 (SPC3 is 5) */
+#define SCSI_SPC2_VER 4 /* indicates SCSI SPC2 (SPC3 is 5) */
-/* Struct & Defines to support sense information. */
+/* Struct and Defines to support sense information. */
-/* The following struct is returned in sensebuf field in uiscmdrsp_scsi. It is
+/*
+ * The following struct is returned in sensebuf field in uiscmdrsp_scsi. It is
* initialized in exactly the manner that is recommended in Windows (hence the
* odd values).
* When set, these fields will have the following values:
struct phys_info frags[MAX_PHYS_INFO]; /* physical page information */
char ethhdr[ETH_HEADER_SIZE]; /* the ethernet header */
struct {
- /* these are needed for csum at uisnic end */
+ /* These are needed for csum at uisnic end */
u8 valid; /* 1 = struct is valid - else ignore */
u8 hrawoffv; /* 1 = hwrafoff is valid */
u8 nhrawoffv; /* 1 = nhwrafoff is valid */
/* nhrawoff points to the start of the NETWORK LAYER HEADER */
} lincsum;
- /* **** NOTE ****
+ /*
+ * NOTE:
* The full packet is described in frags but the ethernet header is
* separately kept in ethhdr so that uisnic doesn't have "MAP" the
* guest memory to get to the header. uisnic needs ethhdr to
} __packed;
struct net_pkt_xmtdone {
- u32 xmt_done_result; /* result of NET_XMIT */
+ u32 xmt_done_result; /* result of NET_XMIT */
} __packed;
-/* RCVPOST_BUF_SIZe must be at most page_size(4096) - cache_line_size (64) The
+/*
+ * RCVPOST_BUF_SIZE must be at most page_size(4096) - cache_line_size (64) The
* reason is because dev_skb_alloc which is used to generate RCV_POST skbs in
- * virtnic requires that there is "overhead" in the buffer, and pads 16 bytes. I
- * prefer to use 1 full cache line size for "overhead" so that transfers are
- * better. IOVM requires that a buffer be represented by 1 phys_info structure
+ * visornic requires that there is "overhead" in the buffer, and pads 16 bytes.
+ * Use 1 full cache line size for "overhead" so that transfers are optimized.
+ * IOVM requires that a buffer be represented by 1 phys_info structure
* which can only cover page_size.
*/
#define RCVPOST_BUF_SIZE 4032
((ETH_MAX_MTU + ETH_HEADER_SIZE + RCVPOST_BUF_SIZE - 1) \
/ RCVPOST_BUF_SIZE)
+/*
+ * rcv buf size must be large enough to include ethernet data len + ethernet
+ * header len - we are choosing 2K because it is guaranteed to be describable.
+ */
struct net_pkt_rcvpost {
- /* rcv buf size must be large enough to include ethernet data len +
- * ethernet header len - we are choosing 2K because it is guaranteed
- * to be describable
- */
- struct phys_info frag; /* physical page information for the */
- /* single fragment 2K rcv buf */
- u64 unique_num;
- /* unique_num ensure that receive posts are returned to */
- /* the Adapter which we sent them originally. */
+ /* Physical page information for the single fragment 2K rcv buf */
+ struct phys_info frag;
+
+ /*
+ * Ensures that receive posts are returned to the adapter which we sent
+ * them from originally.
+ */
+ u64 unique_num;
+
} __packed;
+/*
+ * The number of rcvbuf that can be chained is based on max mtu and size of each
+ * rcvbuf.
+ */
struct net_pkt_rcv {
- /* the number of receive buffers that can be chained */
- /* is based on max mtu and size of each rcv buf */
- u32 rcv_done_len; /* length of received data */
- u8 numrcvbufs; /* number of receive buffers that contain the */
- /* incoming data; guest end MUST chain these together. */
- void *rcvbuf[MAX_NET_RCV_CHAIN]; /* list of chained rcvbufs */
- /* each entry is a receive buffer provided by NET_RCV_POST. */
+ u32 rcv_done_len; /* length of received data */
+
+ /*
+ * numrcvbufs: contain the incoming data; guest side MUST chain these
+ * together.
+ */
+ u8 numrcvbufs;
+
+ void *rcvbuf[MAX_NET_RCV_CHAIN]; /* list of chained rcvbufs */
+
+ /* Each entry is a receive buffer provided by NET_RCV_POST. */
/* NOTE: first rcvbuf in the chain will also be provided in net.buf. */
u64 unique_num;
u32 rcvs_dropped_delta;
struct net_pkt_enbdis {
void *context;
- u16 enable; /* 1 = enable, 0 = disable */
+ u16 enable; /* 1 = enable, 0 = disable */
} __packed;
struct net_pkt_macaddr {
void *context;
- u8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
+ u8 macaddr[MAX_MACADDR_LEN]; /* 6 bytes */
} __packed;
/* cmd rsp packet used for VNIC network traffic */
} __packed;
struct uiscmdrsp_scsitaskmgmt {
+ /* The type of task. */
enum task_mgmt_types tasktype;
- /* the type of task */
+ /* The vdisk for which this task mgmt is generated. */
struct uisscsi_dest vdest;
- /* the vdisk for which this task mgmt is generated */
+ /*
+ * This is a handle that the guest has saved off for its own use.
+ * The handle value is preserved by iopart and returned as in task
+ * mgmt rsp.
+ */
u64 handle;
- /* This is a handle that the guest has saved off for its own use.
- * Its value is preserved by iopart & returned as is in the task
- * mgmt rsp.
- */
+ /*
+ * For Linux guests, this is a pointer to wait_queue_head that a
+ * thread is waiting on to see if the taskmgmt command has completed.
+ * When the rsp is received by guest, the thread receiving the
+ * response uses this to notify the thread waiting for taskmgmt
+ * command completion. It's value is preserved by iopart and returned
+ * as in the task mgmt rsp.
+ */
u64 notify_handle;
- /* For linux guests, this is a pointer to wait_queue_head that a
- * thread is waiting on to see if the taskmgmt command has completed.
- * When the rsp is received by guest, the thread receiving the
- * response uses this to notify the thread waiting for taskmgmt
- * command completion. Its value is preserved by iopart & returned
- * as is in the task mgmt rsp.
- */
+ /*
+ * This is a handle to the location in the guest where the result of
+ * the taskmgmt command (result field) is saved to when the response
+ * is handled. It's value is preserved by iopart and returned as in
+ * the task mgmt rsp.
+ */
u64 notifyresult_handle;
- /* this is a handle to location in guest where the result of the
- * taskmgmt command (result field) is to saved off when the response
- * is handled. Its value is preserved by iopart & returned as is in
- * the task mgmt rsp.
- */
+ /* Result of taskmgmt command - set by IOPart - values are: */
char result;
- /* result of taskmgmt command - set by IOPart - values are: */
#define TASK_MGMT_FAILED 0
} __packed;
-/* Used by uissd to send disk add/remove notifications to Guest */
+/* Used by uissd to send disk add/remove notifications to Guest. */
/* Note that the vHba pointer is not used by the Client/Guest side. */
struct uiscmdrsp_disknotify {
u8 add; /* 0-remove, 1-add */
u32 channel, id, lun; /* SCSI Path of Disk to added or removed */
} __packed;
-/* The following is used by virthba/vSCSI to send the Acquire/Release commands
+/*
+ * The following is used by virthba/vSCSI to send the Acquire/Release commands
* to the IOVM.
*/
struct uiscmdrsp_vdiskmgmt {
+ /* The type of task */
enum vdisk_mgmt_types vdisktype;
- /* the type of task */
+ /* The vdisk for which this task mgmt is generated */
struct uisscsi_dest vdest;
- /* the vdisk for which this task mgmt is generated */
+ /*
+ * This is a handle that the guest has saved off for its own use. It's
+ * value is preserved by iopart and returned as in the task mgmt rsp.
+ */
u64 handle;
- /* This is a handle that the guest has saved off for its own use.
- * Its value is preserved by iopart & returned as is in the task
- * mgmt rsp.
- */
+ /*
+ * For Linux guests, this is a pointer to wait_queue_head that a
+ * thread is waiting on to see if the tskmgmt command has completed.
+ * When the rsp is received by guest, the thread receiving the
+ * response uses this to notify the thread waiting for taskmgmt
+ * command completion. It's value is preserved by iopart and returned
+ * as in the task mgmt rsp.
+ */
u64 notify_handle;
- /* For linux guests, this is a pointer to wait_queue_head that a
- * thread is waiting on to see if the tskmgmt command has completed.
- * When the rsp is received by guest, the thread receiving the
- * response uses this to notify the thread waiting for taskmgmt
- * command completion. Its value is preserved by iopart & returned
- * as is in the task mgmt rsp.
- */
+ /*
+ * Handle to the location in guest where the result of the
+ * taskmgmt command (result field) is saved to when the response
+ * is handled. It's value is preserved by iopart and returned as in
+ * the task mgmt rsp.
+ */
u64 notifyresult_handle;
- /* this is a handle to location in guest where the result of the
- * taskmgmt command (result field) is to saved off when the response
- * is handled. Its value is preserved by iopart & returned as is in
- * the task mgmt rsp.
- */
+ /* Result of taskmgmt command - set by IOPart - values are: */
char result;
- /* result of taskmgmt command - set by IOPart - values are: */
#define VDISK_MGMT_FAILED 0
} __packed;
-/* keeping cmd & rsp info in one structure for now cmd rsp packet for scsi */
+/* Keeping cmd and rsp info in one structure for now cmd rsp packet for SCSI */
struct uiscmdrsp {
char cmdtype;
-/* describes what type of information is in the struct */
+/* Describes what type of information is in the struct */
#define CMD_SCSI_TYPE 1
#define CMD_NET_TYPE 2
#define CMD_SCSITASKMGMT_TYPE 3
struct uiscmdrsp_disknotify disknotify;
struct uiscmdrsp_vdiskmgmt vdiskmgmt;
};
- void *private_data; /* send the response when the cmd is */
- /* done (scsi & scsittaskmgmt). */
+ /* Send the response when the cmd is done (scsi and scsittaskmgmt). */
+ void *private_data;
struct uiscmdrsp *next; /* General Purpose Queue Link */
- struct uiscmdrsp *activeQ_next; /* Used to track active commands */
- struct uiscmdrsp *activeQ_prev; /* Used to track active commands */
+ struct uiscmdrsp *activeQ_next; /* Pointer to the nextactive commands */
+ struct uiscmdrsp *activeQ_prev; /* Pointer to the prevactive commands */
} __packed;
struct iochannel_vhba {
u32 mtu; /* 4 bytes */
uuid_le zone_uuid; /* 16 bytes */
} __packed;
-/* This is just the header of the IO channel. It is assumed that directly after
+/*
+ * This is just the header of the IO channel. It is assumed that directly after
* this header there is a large region of memory which contains the command and
* response queues as specified in cmd_q and rsp_q SIGNAL_QUEUE_HEADERS.
*/
} __packed;
#define MAX_CLIENTSTRING_LEN 1024
- /* client_string is NULL termimated so holds max -1 bytes */
+ /* client_string is NULL termimated so holds max-1 bytes */
u8 client_string[MAX_CLIENTSTRING_LEN];
} __packed;
-/* INLINE functions for initializing and accessing I/O data channels */
+/* INLINE functions for initializing and accessing I/O data channels. */
#define SIZEOF_PROTOCOL (COVER(sizeof(struct spar_io_channel_protocol), 64))
#define SIZEOF_CMDRSP (COVER(sizeof(struct uiscmdrsp), 64))
#define MIN_IO_CHANNEL_SIZE COVER(SIZEOF_PROTOCOL + \
2 * MIN_NUMSIGNALS * SIZEOF_CMDRSP, 4096)
-/*
- * INLINE function for expanding a guest's pfn-off-size into multiple 4K page
- * pfn-off-size entires.
- */
-
-/* use 4K page sizes when we it comes to passing page information between */
-/* Guest and IOPartition. */
+/* Use 4K page sizes when passing page info between Guest and IOPartition. */
#define PI_PAGE_SIZE 0x1000
#define PI_PAGE_MASK 0x0FFF
-/* returns next non-zero index on success or zero on failure (i.e. out of
- * room)
- */
-static inline u16
+/* Returns next non-zero index on success or 0 on failure (i.e. out of room). */
+static inline u16
add_physinfo_entries(u64 inp_pfn, u16 inp_off, u32 inp_len, u16 index,
u16 max_pi_arr_entries, struct phys_info pi_arr[])
{
firstlen = PI_PAGE_SIZE - inp_off;
if (inp_len <= firstlen) {
- /* the input entry spans only one page - add as is */
+ /* The input entry spans only one page - add as is. */
if (index >= max_pi_arr_entries)
return 0;
pi_arr[index].pi_pfn = inp_pfn;
return index + 1;
}
- /* this entry spans multiple pages */
+ /* This entry spans multiple pages. */
for (len = inp_len, i = 0; len;
len -= pi_arr[index + i].pi_len, i++) {
if (index + i >= max_pi_arr_entries)
return index + i;
}
-#endif /* __IOCHANNEL_H__ */
+#endif /* __IOCHANNEL_H__ */
projects / openwrt / staging / blogic.git / commitdiff