PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
Changes since U-Boot 1.1.4:
======================================================================
+* PMC405 and CPCI405: Moved configuration of pci resources
+ into config file.
+ PMC405 and CPCI2DP: Added firmware download and booting via pci.
+ Patch by Matthias Fuchs, 20 Dec 2005
+
* Fix 28F256J3A support on PM520 board
(without bank-switching only 32 MB can be accessed)
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Matthias Fuchs, esd GmbH Germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
+extern int do_autoscript (cmd_tbl_t *, int, int, char *[]);
+
+#define ADDRMASK 0xfffff000
+
+/*
+ * Command loadpci: wait for signal from host and boot image.
+ */
+int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int *ptr = 0;
+ int count = 0;
+ int count2 = 0;
+ char addr[16];
+ char str[] = "\\|/-";
+ char *local_args[2];
+
+ while(1) {
+ /*
+ * Mark sync address
+ */
+ ptr = 0;
+ memset(ptr, 0, 0x20);
+
+ *ptr = 0xffffffff;
+ puts("\nWaiting for action from pci host -");
+
+ /*
+ * Wait for host to write the start address
+ */
+ while (*ptr == 0xffffffff) {
+ count++;
+ if (!(count % 100)) {
+ count2++;
+ putc(0x08); /* backspace */
+ putc(str[count2 % 4]);
+ }
+
+ /* Abort if ctrl-c was pressed */
+ if (ctrlc()) {
+ puts("\nAbort\n");
+ return 0;
+ }
+
+ udelay(1000);
+ }
+
+ printf("\nGot bootcode %08x: ", *ptr);
+ sprintf(addr, "%08x", *ptr & ADDRMASK);
+
+ switch (*ptr & ~ADDRMASK) {
+ case 0:
+ /*
+ * Boot image via bootm
+ */
+ printf("booting image at addr 0x%s ...\n", addr);
+ setenv("loadaddr", addr);
+
+ do_bootm (cmdtp, 0, 0, NULL);
+ break;
+
+ case 1:
+ /*
+ * Boot image via autoscr
+ */
+ printf("executing script at addr 0x%s ...\n", addr);
+
+ local_args[0] = addr;
+ local_args[1] = NULL;
+ do_autoscript(cmdtp, 0, 1, local_args);
+ break;
+
+ case 2:
+ /*
+ * Call run_cmd
+ */
+ printf("running command at addr 0x%s ...\n", addr);
+ run_command ((char*)(*ptr & ADDRMASK), 0);
+ break;
+
+ default:
+ printf("unhandled boot method\n");
+ break;
+ }
+ }
+}
+
+U_BOOT_CMD(
+ loadpci, 1, 1, do_loadpci,
+ "loadpci - Wait for pci bootcmd and boot it\n",
+ NULL
+ );
+
+#endif
+
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+OBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
unsigned long cntrl0Reg;
/*
- * Setup GPIO pins (CS4+CS7 as GPIO)
+ * Setup GPIO pins
*/
cntrl0Reg = mfdcr(cntrl0);
- mtdcr(cntrl0, cntrl0Reg | 0x00900000);
+ mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5));
- /* set output pins to high */
- out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED);
- /* INTA# is open drain */
- out32(GPIO0_ODR, CFG_INTA_FAKE);
- /* setup for output */
- out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP);
+ /* set output pins to high */
+ out32(GPIO0_OR, CFG_EEPROM_WP);
+ /* setup for output (LED=off) */
+ out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED);
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
/* ------------------------------------------------------------------------- */
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: 64 MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
#if defined(CFG_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
}
U_BOOT_CMD(
- eepwren, 2, 0, do_eep_wren,
- "eepwren - Enable / disable / query EEPROM write access\n",
- NULL
- );
+ eepwren, 2, 0, do_eep_wren,
+ "eepwren - Enable / disable / query EEPROM write access\n",
+ NULL
+ );
#endif /* #if defined(CFG_EEPROM_WREN) */
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o ../common/misc.o $(CPLD)
+OBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
/*
* (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2005
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
mtebc (epcr, 0xa8400000);
/*
- * Setup GPIO pins (CS6+CS7 as GPIO)
+ * Setup GPIO pins
*/
- mtdcr(cntrl0, mfdcr(cntrl0) | 0x00300000);
- /*
- * Configure GPIO pins
+ mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \
+ CFG_FPGA_DONE | \
+ CFG_XEREADY | \
+ CFG_NONMONARCH | \
+ CFG_REV1_2) << 5));
+
+ if (!(in32(GPIO0_IR) & CFG_REV1_2)) {
+ /* rev 1.2 boards */
+ mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \
+ CFG_SELF_RST) << 5));
+ }
+
+ out32(GPIO0_OR, 0);
+ out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */
+
+ /* - check if rev1_2 is low, then:
+ * - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST#
*/
- out32(GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA); /* setup for output */
- out32(GPIO0_OR, 0); /* outputs -> low */
return 0;
}
/* ------------------------------------------------------------------------- */
-int misc_init_f (void)
-{
- return 0; /* dummy implementation */
-}
-
int misc_init_r (void)
{
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */
return (0);
}
+ushort pmc405_pci_subsys_deviceid(void)
+{
+ ulong val;
+ val = in32(GPIO0_IR);
+ if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
+ if (val & CFG_NONMONARCH) { /* monarch# signal */
+ return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+ }
+ return CFG_PCI_SUBSYS_DEVICEID_MONARCH;
+ }
+ return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+}
/*
* Check Board Identity:
*/
-
int checkboard (void)
{
+ ulong val;
+
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
puts(str);
}
- putc ('\n');
+ val = in32(GPIO0_IR);
+ if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
+ puts(" rev1.2 (");
+ if (val & CFG_NONMONARCH) { /* monarch# signal */
+ puts("non-");
+ }
+ puts("monarch)");
+ } else {
+ puts(" <=rev1.1");
+ }
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
+ putc ('\n');
return 0;
}
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
-/* ------------------------------------------------------------------------- */
-int testdram (void)
+/* ------------------------------------------------------------------------- */
+void reset_phy(void)
{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
+#ifdef CONFIG_LXT971_NO_SLEEP
- return (0);
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
+#endif
}
-/* ------------------------------------------------------------------------- */
int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#ifdef CONFIG_PCI
+#if defined(CONFIG_PMC405)
+ushort pmc405_pci_subsys_deviceid(void);
+#endif
+
/*#define DEBUG*/
/*-----------------------------------------------------------------------------+
unsigned short temp_short;
unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI};
#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
- unsigned long ptmla[2] = {bd->bi_memstart, bd->bi_flashstart};
- unsigned long ptmms[2] = {~(bd->bi_memsize - 1) | 1, ~(bd->bi_flashsize - 1) | 1};
char *ptmla_str, *ptmms_str;
-#else
+#endif
unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA};
unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS};
-#endif
#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
#define CFG_PCI_SUBSYS_DEVICEID 0x040b /* PCI Device ID: CPCI-2DP */
#define CFG_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs + PB0/1 */
#define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */
#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* GPIO definitions
*/
#define CFG_EEPROM_WP (0x80000000 >> 13) /* GPIO13 */
+#define CFG_SELF_RST (0x80000000 >> 14) /* GPIO14 */
#define CFG_PB_LED (0x80000000 >> 16) /* GPIO16 */
#define CFG_INTA_FAKE (0x80000000 >> 23) /* GPIO23 */
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_NET_MULTI 1
+#undef CONFIG_HAS_ETH1
+
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BSP | \
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */
+#define CFG_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */
+#define CFG_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */
+#define CFG_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
+
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
+
+#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
+#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#if 1
+#define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs */
+#define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */
+#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
+#else /* old mapping */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-
+#endif
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */
#define CAN_BA 0xF0000000 /* CAN Base Address */
#define RTC_BA 0xF0000500 /* RTC Base Address */
-#define CF_BA 0xF0100000 /* CompactFlash Base Address */
+#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */
/* Memory Bank 0 (Flash Bank 0) initialization */
#define CFG_EBC_PB0AP 0x92015480
#define CFG_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
#define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
-/* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization */
-#define CFG_EBC_PB3AP 0x010059C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+/* Memory Bank 3 -> unused */
+
+/* Memory Bank 4 (NVRAM) initialization */
+#define CFG_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
+#define CFG_EBC_PB4CR NVRAM_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
/*-----------------------------------------------------------------------
* FPGA stuff
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
+/*-----------------------------------------------------------------------
+ * GPIOs
+ */
+#define CFG_NONMONARCH (0x80000000 >> 14) /* GPIO24 */
+#define CFG_XEREADY (0x80000000 >> 15) /* GPIO15 */
+#define CFG_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */
+#define CFG_SELF_RST (0x80000000 >> 21) /* GPIO21 */
+#define CFG_REV1_2 (0x80000000 >> 23) /* GPIO23 */
+
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in data cache)
*/
projects / project / bcm63xx / u-boot.git / commitdiff