// Clear old channel map
memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
// Set new channel map
- for (i = 0;i<ChannelPlan[channel_plan].Len;i++) {
+ for (i = 0;i < ChannelPlan[channel_plan].Len;i++) {
if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan)
break;
GET_DOT11D_INFO(ieee)->channel_map[ChannelPlan[channel_plan].Channel[i]] = 1;
seq_puts(m, "\n####################page 0##################\n ");
- for (n = 0;n<=max;) {
+ for (n = 0;n <= max;) {
//printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ",n);
- for (i = 0;i<16 && n<=max;i++,n++)
+ for (i = 0;i < 16 && n <= max;i++,n++)
seq_printf(m, "%2x ",read_nic_byte(dev,0x000|n));
// printk("%2x ",read_nic_byte(dev,n));
}
seq_puts(m, "\n####################page 1##################\n ");
- for (n = 0;n<=max;) {
+ for (n = 0;n <= max;) {
//printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ",n);
- for (i = 0;i<16 && n<=max;i++,n++)
+ for (i = 0;i < 16 && n <= max;i++,n++)
seq_printf(m, "%2x ",read_nic_byte(dev,0x100|n));
// printk("%2x ",read_nic_byte(dev,n));
}
seq_puts(m, "\n####################page 3##################\n ");
- for (n = 0;n<=max;) {
+ for (n = 0;n <= max;) {
//printk( "\nD: %2x> ", n);
seq_printf(m, "\nD: %2x > ",n);
- for (i = 0;i<16 && n<=max;i++,n++)
+ for (i = 0;i < 16 && n <= max;i++,n++)
seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
// printk("%2x ",read_nic_byte(dev,n));
printk("ASCII BUFFER DUMP (len: %x):\n",len);
- for (i = 0;i<len;i++)
+ for (i = 0;i < len;i++)
printk("%c",buf[i]);
printk("\nBINARY BUFFER DUMP (len: %x):\n",len);
- for (i = 0;i<len;i++)
+ for (i = 0;i < len;i++)
printk("%x",buf[i]);
printk("\n");
void dump_eprom(struct net_device *dev)
{
int i;
- for (i = 0; i<63; i++)
+ for (i = 0; i < 63; i++)
RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev,i));
}
RT_TRACE(COMP_PHY, "Dumping NIC register map");
- for (n = 0;n<=max;)
+ for (n = 0;n <= max;)
{
printk( "\nD: %2x> ", n);
- for (i = 0;i<16 && n<=max;i++,n++)
+ for (i = 0;i < 16 && n <= max;i++,n++)
printk("%2x ",read_nic_byte(dev,n));
}
printk("\n");
static u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
inline u16 rtl8192_rate2rate(short rate)
{
- if (rate >11) return 0;
+ if (rate > 11) return 0;
return rtl_rate[rate];
}
tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
+ tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
+ tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
+ tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
(tcb_desc->bRTSUseShortGI?1:0);
/* Set Bandwidth and sub-channel settings. */
return; //modified by david to avoid further processing AMSDU
}
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
+ else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index]) != 0)&&\
(!(priv->ieee80211->queue_stop))) {
// Tx Driver Aggregation process
/* The driver will aggregation the packets according to the following stats
u8 i = 0, basic_rate = 0;
net = & priv->ieee80211->current_network;
- for (i = 0; i<net->rates_len; i++)
+ for (i = 0; i < net->rates_len; i++)
{
basic_rate = net->rates[i]&0x7f;
switch (basic_rate)
case MGN_54M: *rate_config |= RRSR_54M; break;
}
}
- for (i = 0; i<net->rates_ex_len; i++)
+ for (i = 0; i < net->rates_ex_len; i++)
{
basic_rate = net->rates_ex[i]&0x7f;
switch (basic_rate)
{
u8 tmp_Short;
- tmp_Short = (TxHT==1)?((tcb_desc->bUseShortGI)?1:0):((tcb_desc->bUseShortPreamble)?1:0);
+ tmp_Short = (TxHT == 1)?((tcb_desc->bUseShortGI)?1:0):((tcb_desc->bUseShortPreamble)?1:0);
- if (TxHT==1 && TxRate != DESC90_RATEMCS15)
+ if (TxHT == 1 && TxRate != DESC90_RATEMCS15)
tmp_Short = 0;
return tmp_Short;
tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
+ tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
+ tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
+ tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
(tcb_desc->bRTSUseShortGI?1:0);
/* Set Bandwidth and sub-channel settings. */
return -ENOMEM;
#ifndef JACKSON_NEW_RX
- for (i = 0;i<(MAX_RX_URB+1);i++){
+ for (i = 0;i < (MAX_RX_URB+1);i++){
priv->rx_urb[i] = usb_alloc_urb(0,GFP_KERNEL);
struct r8192_priv *priv = ieee80211_priv(dev);
if (priv->rx_urb){
- for (i = 0;i<(MAX_RX_URB+1);i++){
+ for (i = 0;i < (MAX_RX_URB+1);i++){
usb_kill_urb(priv->rx_urb[i]);
usb_free_urb(priv->rx_urb[i]);
}
#ifndef JACKSON_NEW_RX
if (priv->rx_urb){
- for (i = 0;i<(MAX_RX_URB+1);i++){
+ for (i = 0;i < (MAX_RX_URB+1);i++){
usb_kill_urb(priv->rx_urb[i]);
kfree(priv->rx_urb[i]->transfer_buffer);
usb_free_urb(priv->rx_urb[i]);
int ret = 0;
u32 size = sizeof(struct ieee80211_qos_parameters);
- if (priv->ieee80211->state !=IEEE80211_LINKED)
+ if (priv->ieee80211->state != IEEE80211_LINKED)
return ret;
if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
if ((priv == NULL) || (network == NULL))
return ret;
- if (priv->ieee80211->state !=IEEE80211_LINKED)
+ if (priv->ieee80211->state != IEEE80211_LINKED)
return ret;
if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
- if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode)==0))
+ if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode) == 0))
{
if (bSupportMode & WIRELESS_MODE_N_24G)
{
if (bLoad_From_EEPOM)
{
int i;
- for (i = 0; i<6; i += 2)
+ for (i = 0; i < 6; i += 2)
{
u16 tmp = 0;
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
else
priv->EEPROMTxPowerLevelCCK = 0x10;
RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
- for (i = 0; i<3; i++)
+ for (i = 0; i < 3; i++)
{
if (bLoad_From_EEPOM)
{
//
{
int i;
- for (i = 0; i<14; i++)
+ for (i = 0; i < 14; i++)
{
- if (i<=3)
+ if (i <= 3)
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
- else if (i>=4 && i<=9)
+ else if (i >= 4 && i <= 9)
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
else
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
}
- for (i = 0; i<14; i++)
+ for (i = 0; i < 14; i++)
{
if (priv->EEPROM_Def_Ver == 0)
{
- if (i<=3)
+ if (i <= 3)
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
- else if (i>=4 && i<=9)
+ else if (i >= 4 && i <= 9)
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
else
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
}
else if (priv->EEPROM_Def_Ver == 1)
{
- if (i<=3)
+ if (i <= 3)
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
- else if (i>=4 && i<=9)
+ else if (i >= 4 && i <= 9)
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
else
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
init_timer(&priv->watch_dog_timer);
priv->watch_dog_timer.data = (unsigned long)dev;
priv->watch_dog_timer.function = watch_dog_timer_callback;
- if (rtl8192_usb_initendpoints(dev)!=0){
+ if (rtl8192_usb_initendpoints(dev) != 0){
DMESG("Endopoints initialization failed");
return -ENOMEM;
}
{
#define DEFAULT_EDCA 0x005e4332
int i;
- for (i = 0; i<QOS_QUEUE_NUM; i++)
+ for (i = 0; i < QOS_QUEUE_NUM; i++)
write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those actions will be discard in MgntActSet_RF_State because of the same state
- for (eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS)
{
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
// Those actions will be discard in MgntActSet_RF_State because of the same state
- for (eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
}
}
{
//if D or C cut
u8 tmpvalue = read_nic_byte(dev, 0x301);
- if (tmpvalue ==0x03)
+ if (tmpvalue == 0x03)
{
priv->bDcut = TRUE;
RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
u32 i, TempCCk;
u32 tmpRegA = rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
// u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
- for (i = 0; i<TxBBGainTableLength; i++)
+ for (i = 0; i < TxBBGainTableLength; i++)
{
if (tmpRegA == priv->txbbgain_table[i].txbbgain_value)
{
TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
- for (i = 0 ; i<CCKTxBBGainTableLength ; i++)
+ for (i = 0 ; i < CCKTxBBGainTableLength ; i++)
{
if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
u16 RegTxCounter = read_nic_word(dev, 0x128);
bool bStuck = FALSE;
RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter);
- if (priv->TxCounter==RegTxCounter)
+ if (priv->TxCounter == RegTxCounter)
bStuck = TRUE;
priv->TxCounter = RegTxCounter;
// RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
// PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
// spin_lock_irqsave(&priv->ieee80211->lock,flags);
- for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++)
+ for (QueueID = 0; QueueID <= BEACON_QUEUE;QueueID ++)
{
if (QueueID == TXCMD_QUEUE)
continue;
rx_chk_cnt = 0; //high rssi, check rx stuck right now.
}
else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
- ((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_20M)) )
+ ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M)) )
{
if (rx_chk_cnt < 2)
{
rx_chk_cnt = 0;
}
}
- else if (((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_20M)) &&
+ else if (((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_20M)) &&
priv->undecorated_smoothed_pwdb >= VeryLowRSSI)
{
if (rx_chk_cnt < 4)
}
}
- if (priv->RxCounter==RegRxCounter)
+ if (priv->RxCounter == RegRxCounter)
bStuck = TRUE;
priv->RxCounter = RegRxCounter;
// set, STA cannot hear any packet at all. Emily, 2008.04.12
RxResetType = RxCheckStuck(dev);
}
- if (TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
+ if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL)
return RESET_TYPE_NORMAL;
- else if (TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){
+ else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT){
RT_TRACE(COMP_RESET,"%s():silent reset\n",__FUNCTION__);
return RESET_TYPE_SILENT;
}
(priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104))
{
- for (EntryId = 0; EntryId<4; EntryId++)
+ for (EntryId = 0; EntryId < 4; EntryId++)
{
{
MacAddr = CAM_CONST_ADDR[EntryId];
if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP)
{
MacAddr = CAM_CONST_BROAD;
- for (EntryId = 1 ; EntryId<4 ; EntryId++)
+ for (EntryId = 1 ; EntryId < 4 ; EntryId++)
{
{
setKey(dev,
else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP)
{
MacAddr = CAM_CONST_BROAD;
- for (EntryId = 1; EntryId<4 ; EntryId++)
+ for (EntryId = 1; EntryId < 4 ; EntryId++)
{
{
setKey(dev,
// 2007.07.20. If we need to check CCK stop, please uncomment this line.
//bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter);
- if (priv->ResetProgress==RESET_TYPE_NORESET)
+ if (priv->ResetProgress == RESET_TYPE_NORESET)
{
RESET_START:
u32 ulStatus;
s32 i = 100;
// printk("=======>start read CAM\n");
- for (entry_i = 0;entry_i<CAM_CONTENT_COUNT;entry_i++)
+ for (entry_i = 0;entry_i < CAM_CONTENT_COUNT;entry_i++)
{
// polling bit, and No Write enable, and address
target_command = entry_i+CAM_CONTENT_COUNT*iIndex;
//Check polling bit is clear
// mdelay(1);
- while ((i--)>=0)
+ while ((i--) >= 0)
{
ulStatus = read_nic_dword(dev, RWCAM);
if (ulStatus & BIT31){
SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
- for ( i = 0; i<priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){
+ for ( i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){
*TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i];
*TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i];
}
{//to get busy traffic condition
if (ieee->state == IEEE80211_LINKED)
{
- if ( ieee->LinkDetectInfo.NumRxOkInPeriod> 666 ||
- ieee->LinkDetectInfo.NumTxOkInPeriod> 666 ) {
+ if ( ieee->LinkDetectInfo.NumRxOkInPeriod > 666 ||
+ ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) {
bBusyTraffic = true;
}
ieee->LinkDetectInfo.NumRxOkInPeriod = 0;
//DbgPrint("Start to check silent reset\n");
}
// RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
- if ( (priv->force_reset) || (priv->ResetProgress==RESET_TYPE_NORESET &&
+ if ( (priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
(priv->bForcedSilentReset ||
- (!priv->bDisableNormalResetCheck && ResetType==RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
+ (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
{
RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
rtl819x_ifsilentreset(dev);
#ifdef JOHN_HWSEC_DEBUG
//john's test 0711
printk("@@ wrq->u pointer = ");
- for (i = 0;i<wrq->u.data.length;i++){
- if (i%10==0) printk("\n");
+ for (i = 0;i < wrq->u.data.length;i++){
+ if (i%10 == 0) printk("\n");
printk( "%8x|", ((u32 *)wrq->u.data.pointer)[i] );
}
printk("\n");
// <2> Showed on UI for engineering
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
{
- for (nspatial_stream = 0; nspatial_stream<2 ; nspatial_stream++) // 2 spatial stream
+ for (nspatial_stream = 0; nspatial_stream < 2 ; nspatial_stream++) // 2 spatial stream
{
if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1)
{
//
// (1)Get RSSI for HT rate
//
- for (i = RF90_PATH_A; i<priv->NumTotalRFPath; i++)
+ for (i = RF90_PATH_A; i < priv->NumTotalRFPath; i++)
{
// 2008/01/30 MH we will judge RF RX path now.
if (priv->brfpath_rxenable[i])
//
// (3)EVM of HT rate
//
- if (pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 &&
- pdrvinfo->RxRate<=DESC90_RATEMCS15)
+ if (pdrvinfo->RxHT && pdrvinfo->RxRate >= DESC90_RATEMCS8 &&
+ pdrvinfo->RxRate <= DESC90_RATEMCS15)
max_spatial_stream = 2; //both spatial stream make sense
else
max_spatial_stream = 1; //only spatial stream 1 makes sense
- for (i = 0; i<max_spatial_stream; i++)
+ for (i = 0; i < max_spatial_stream; i++)
{
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (char)(tmp_rxevm);
evm = rtl819x_evm_dbtopercentage(rx_evmX);
//if(bpacket_match_bssid)
{
- if (i==0) // Fill value in RFD, Get the first spatial stream only
+ if (i == 0) // Fill value in RFD, Get the first spatial stream only
pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
}
&& (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
- if (WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
+ if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)
{
bPacketBeacon = true;
//DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
UpdateReceivedRateHistogramStatistics8190(dev, stats);
- stats->bIsAMPDU = (driver_info->PartAggr==1);
- stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1);
+ stats->bIsAMPDU = (driver_info->PartAggr == 1);
+ stats->bFirstMPDU = (driver_info->PartAggr == 1) && (driver_info->FirstAGGR == 1);
stats->TimeStampLow = driver_info->TSFL;
// xiong mask it, 070514
//pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
//
// Rx A-MPDU
//
- if (driver_info->FirstAGGR==1 || driver_info->PartAggr == 1)
+ if (driver_info->FirstAGGR == 1 || driver_info->PartAggr == 1)
RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
driver_info->FirstAGGR, driver_info->PartAggr);
#endif
/* 20 is for ps-poll */
- if ((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
+ if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
#ifdef USB_RX_AGGREGATION_SUPPORT
TempByte = *(skb->data + sizeof(rx_desc_819x_usb));
#endif
else
agg_skb->len = 0;
- while (agg_skb->len>=GetRxPacketShiftBytes819xUsb(&stats, true)) {
+ while (agg_skb->len >= GetRxPacketShiftBytes819xUsb(&stats, true)) {
u8 tmpCRC = 0, tmpICV = 0;
//RT_TRACE(COMP_RECV,"%s:aggred pkt,total_len = %d\n",__FUNCTION__,agg_skb->len);
RxDescr = (rx_desc_819x_usb_aggr_subframe *)(agg_skb->data);
.freq = IEEE80211_24GHZ_BAND,
};
- if ((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
+ if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
{
query_rx_cmdpkt_desc_status(skb,&stats);
}
RT_TRACE(COMP_INIT, "Driver probe completed1\n");
- if (rtl8192_init(dev)!=0){
+ if (rtl8192_init(dev) != 0){
RT_TRACE(COMP_ERR, "Initialization failed");
ret = -ENODEV;
goto fail;
// usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
- for (i = 0 ; i<CAM_CONTENT_COUNT; i++){
+ for (i = 0 ; i < CAM_CONTENT_COUNT; i++){
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
TargetCommand |= BIT31|BIT16;
- if (i==0){//MAC|Config
+ if (i == 0){//MAC|Config
TargetContent = (u32)(*(MacAddr+0)) << 16|
(u32)(*(MacAddr+1)) << 24|
(u32)usConfig;
write_nic_dword(dev, RWCAM, TargetCommand);
// printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo));
}
- else if (i==1){//MAC
+ else if (i == 1){//MAC
TargetContent = (u32)(*(MacAddr+2)) |
(u32)(*(MacAddr+3)) << 8|
(u32)(*(MacAddr+4)) << 16|
}
else {
//Key Material
- if (KeyContent !=NULL){
+ if (KeyContent != NULL){
write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)) );
write_nic_dword(dev, RWCAM, TargetCommand);
}
projects / openwrt / staging / blogic.git / commitdiff