ath6kl: separate hardware boot code from module initialisation code

Refactor the code needed to boot the hardware to a separate function so
that it will be easier boot and shutdown hardware.

No functional changes (hopefully).

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 62e0f22afefadad16e8fbaff35463c20e582cfc1..2ee6a5eced651bcd2c8b1bbb1bb65f56d6d8e039 100644 (file)
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1421,12 +1421,107 @@ static int ath6kl_init_hw_params(struct ath6kl *ar)
        return 0;
 }
 
+static int ath6kl_hw_start(struct ath6kl *ar)
+{
+       long timeleft;
+       int ret, i;
+
+       ret = ath6kl_hif_power_on(ar);
+       if (ret)
+               return ret;
+
+       ret = ath6kl_configure_target(ar);
+       if (ret)
+               goto err_power_off;
+
+       ret = ath6kl_init_upload(ar);
+       if (ret)
+               goto err_power_off;
+
+       /* Do we need to finish the BMI phase */
+       /* FIXME: return error from ath6kl_bmi_done() */
+       if (ath6kl_bmi_done(ar)) {
+               ret = -EIO;
+               goto err_power_off;
+       }
+
+       /*
+        * The reason we have to wait for the target here is that the
+        * driver layer has to init BMI in order to set the host block
+        * size.
+        */
+       if (ath6kl_htc_wait_target(ar->htc_target)) {
+               ret = -EIO;
+               goto err_power_off;
+       }
+
+       if (ath6kl_init_service_ep(ar)) {
+               ret = -EIO;
+               goto err_cleanup_scatter;
+       }
+
+       /* setup credit distribution */
+       ath6kl_credit_setup(ar->htc_target, &ar->credit_state_info);
+
+       /* start HTC */
+       ret = ath6kl_htc_start(ar->htc_target);
+       if (ret) {
+               /* FIXME: call this */
+               ath6kl_cookie_cleanup(ar);
+               goto err_cleanup_scatter;
+       }
+
+       /* Wait for Wmi event to be ready */
+       timeleft = wait_event_interruptible_timeout(ar->event_wq,
+                                                   test_bit(WMI_READY,
+                                                            &ar->flag),
+                                                   WMI_TIMEOUT);
+
+       ath6kl_dbg(ATH6KL_DBG_BOOT, "firmware booted\n");
+
+       if (ar->version.abi_ver != ATH6KL_ABI_VERSION) {
+               ath6kl_err("abi version mismatch: host(0x%x), target(0x%x)\n",
+                          ATH6KL_ABI_VERSION, ar->version.abi_ver);
+               ret = -EIO;
+               goto err_htc_stop;
+       }
+
+       if (!timeleft || signal_pending(current)) {
+               ath6kl_err("wmi is not ready or wait was interrupted\n");
+               ret = -EIO;
+               goto err_htc_stop;
+       }
+
+       ath6kl_dbg(ATH6KL_DBG_TRC, "%s: wmi is ready\n", __func__);
+
+       /* communicate the wmi protocol verision to the target */
+       /* FIXME: return error */
+       if ((ath6kl_set_host_app_area(ar)) != 0)
+               ath6kl_err("unable to set the host app area\n");
+
+       for (i = 0; i < MAX_NUM_VIF; i++) {
+               ret = ath6kl_target_config_wlan_params(ar, i);
+               if (ret)
+                       goto err_htc_stop;
+       }
+
+       return 0;
+
+err_htc_stop:
+       ath6kl_htc_stop(ar->htc_target);
+err_cleanup_scatter:
+       ath6kl_hif_cleanup_scatter(ar);
+err_power_off:
+       ath6kl_hif_power_off(ar);
+
+       return ret;
+}
+
 int ath6kl_core_init(struct ath6kl *ar)
 {
        struct ath6kl_bmi_target_info targ_info;
-       s32 timeleft;
        struct net_device *ndev;
-       int i, ret = 0;
+       int ret = 0, i;
 
        ar->ath6kl_wq = create_singlethread_workqueue("ath6kl");
        if (!ar->ath6kl_wq)
@@ -1436,6 +1531,11 @@ int ath6kl_core_init(struct ath6kl *ar)
        if (ret)
                goto err_wq;
 
+       /*
+        * Turn on power to get hardware (target) version and leave power
+        * on delibrately as we will boot the hardware anyway within few
+        * seconds.
+        */
        ret = ath6kl_hif_power_on(ar);
        if (ret)
                goto err_bmi_cleanup;
@@ -1452,10 +1552,6 @@ int ath6kl_core_init(struct ath6kl *ar)
        if (ret)
                goto err_power_off;
 
-       ret = ath6kl_configure_target(ar);
-       if (ret)
-               goto err_power_off;
-
        ar->htc_target = ath6kl_htc_create(ar);
 
        if (!ar->htc_target) {
@@ -1469,16 +1565,6 @@ int ath6kl_core_init(struct ath6kl *ar)
 
        /* FIXME: we should free all firmwares in the error cases below */
 
-       ret = ath6kl_init_upload(ar);
-       if (ret)
-               goto err_htc_cleanup;
-
-       /* Do we need to finish the BMI phase */
-       if (ath6kl_bmi_done(ar)) {
-               ret = -EIO;
-               goto err_htc_cleanup;
-       }
-
        /* Indicate that WMI is enabled (although not ready yet) */
        set_bit(WMI_ENABLED, &ar->flag);
        ar->wmi = ath6kl_wmi_init(ar);
@@ -1522,21 +1608,6 @@ int ath6kl_core_init(struct ath6kl *ar)
        ath6kl_dbg(ATH6KL_DBG_TRC, "%s: name=%s dev=0x%p, ar=0x%p\n",
                        __func__, ndev->name, ndev, ar);
 
-       /*
-        * The reason we have to wait for the target here is that the
-        * driver layer has to init BMI in order to set the host block
-        * size.
-        */
-       if (ath6kl_htc_wait_target(ar->htc_target)) {
-               ret = -EIO;
-               goto err_if_deinit;
-       }
-
-       if (ath6kl_init_service_ep(ar)) {
-               ret = -EIO;
-               goto err_cleanup_scatter;
-       }
-
        /* setup access class priority mappings */
        ar->ac_stream_pri_map[WMM_AC_BK] = 0; /* lowest  */
        ar->ac_stream_pri_map[WMM_AC_BE] = 1;
@@ -1550,55 +1621,18 @@ int ath6kl_core_init(struct ath6kl *ar)
        /* allocate some buffers that handle larger AMSDU frames */
        ath6kl_refill_amsdu_rxbufs(ar, ATH6KL_MAX_AMSDU_RX_BUFFERS);
 
-       /* setup credit distribution */
-       ath6kl_credit_setup(ar->htc_target, &ar->credit_state_info);
-
        ath6kl_cookie_init(ar);
 
-       /* start HTC */
-       ret = ath6kl_htc_start(ar->htc_target);
-       if (ret) {
-               ath6kl_cookie_cleanup(ar);
-               goto err_rxbuf_cleanup;
-       }
-
-       /* Wait for Wmi event to be ready */
-       timeleft = wait_event_interruptible_timeout(ar->event_wq,
-                                                   test_bit(WMI_READY,
-                                                            &ar->flag),
-                                                   WMI_TIMEOUT);
-
-       ath6kl_dbg(ATH6KL_DBG_BOOT, "firmware booted\n");
-
-       if (ar->version.abi_ver != ATH6KL_ABI_VERSION) {
-               ath6kl_err("abi version mismatch: host(0x%x), target(0x%x)\n",
-                          ATH6KL_ABI_VERSION, ar->version.abi_ver);
-               ret = -EIO;
-               goto err_htc_stop;
-       }
-
-       if (!timeleft || signal_pending(current)) {
-               ath6kl_err("wmi is not ready or wait was interrupted\n");
-               ret = -EIO;
-               goto err_htc_stop;
-       }
-
-       ath6kl_dbg(ATH6KL_DBG_TRC, "%s: wmi is ready\n", __func__);
-
-       /* communicate the wmi protocol verision to the target */
-       if ((ath6kl_set_host_app_area(ar)) != 0)
-               ath6kl_err("unable to set the host app area\n");
-
        ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
                         ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
 
        ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
                            WIPHY_FLAG_HAVE_AP_SME;
 
-       for (i = 0; i < MAX_NUM_VIF; i++) {
-               ret = ath6kl_target_config_wlan_params(ar, i);
-               if (ret)
-                       goto err_htc_stop;
+       ret = ath6kl_hw_start(ar);
+       if (ret) {
+               ath6kl_err("Failed to boot hardware: %d\n", ret);
+               goto err_rxbuf_cleanup;
        }
 
        /*
@@ -1609,14 +1643,9 @@ int ath6kl_core_init(struct ath6kl *ar)
 
        return ret;
 
-err_htc_stop:
-       ath6kl_htc_stop(ar->htc_target);
 err_rxbuf_cleanup:
        ath6kl_htc_flush_rx_buf(ar->htc_target);
        ath6kl_cleanup_amsdu_rxbufs(ar);
-err_cleanup_scatter:
-       ath6kl_hif_cleanup_scatter(ar);
-err_if_deinit:
        rtnl_lock();
        ath6kl_deinit_if_data(netdev_priv(ndev));
        rtnl_unlock();