powerpc/85xx: add hardware automatically enter altivec idle state

Each core's AltiVec unit may be placed into a power savings mode
by turning off power to the unit. Core hardware will automatically
power down the AltiVec unit after no AltiVec instructions have
executed in N cycles. The AltiVec power-control is triggered by hardware.

Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index fa6862db8a0296f814a3b0fb675c859ef0492d24..26c09db2ec20b6df61f94db5e8da8803dd666dc7 100644 (file)
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -53,6 +53,25 @@ _GLOBAL(__e500_dcache_setup)
        isync
        blr
 
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for AV_WAIT_IDLE_BIT.
+ */
+#define AV_WAIT_IDLE_BIT               50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_altivec_idle)
+       mfspr   r3, SPRN_PWRMGTCR0
+
+       /* Enable Altivec Idle */
+       oris    r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
+       li      r11, AV_WAIT_IDLE_BIT
+
+       /* Set Automatic AltiVec Idle Count */
+       rlwimi  r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
+
+       mtspr   SPRN_PWRMGTCR0, r3
+
+       blr
+
 _GLOBAL(__setup_cpu_e6500)
        mflr    r6
 #ifdef CONFIG_PPC64
@@ -64,6 +83,7 @@ _GLOBAL(__setup_cpu_e6500)
        bl      .setup_lrat_ivor
 1:
 #endif
+       bl      setup_altivec_idle
        bl      __setup_cpu_e5500
        mtlr    r6
        blr
@@ -131,6 +151,7 @@ _GLOBAL(__restore_cpu_e6500)
        beq     1f
        bl      .setup_lrat_ivor
 1:
+       bl      .setup_altivec_idle
        bl      __restore_cpu_e5500
        mtlr    r5
        blr