mtd: nand: refactor print messages

Add a nice "nand:" prefix to all pr_xxx() messages. This allows
to get rid of the "NAND" words in messages, given the context
is already given by the prefix.

Remove the __func__ report from messages where it's not needed and refactor
the device detection messages to show itself in several lines.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bd39f7b67906f65db526cbd0d1d27bb84ad93277..9b3bb3c519e9f632610f5e03faafa45ae3c648ee 100644 (file)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -29,6 +29,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -2979,7 +2981,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
                chip->onfi_version = 10;
 
        if (!chip->onfi_version) {
-               pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
+               pr_info("unsupported ONFI version: %d\n", val);
                return 0;
        }
 
@@ -3372,8 +3374,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
                id_data[i] = chip->read_byte(mtd);
 
        if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
-               pr_info("%s: second ID read did not match "
-                       "%02x,%02x against %02x,%02x\n", __func__,
+               pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
                        *maf_id, *dev_id, id_data[0], id_data[1]);
                return ERR_PTR(-ENODEV);
        }
@@ -3440,10 +3441,10 @@ ident_done:
                 * Check, if buswidth is correct. Hardware drivers should set
                 * chip correct!
                 */
-               pr_info("NAND device: Manufacturer ID:"
-                       " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
-                       *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
-               pr_warn("NAND bus width %d instead %d bit\n",
+               pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+                       *maf_id, *dev_id);
+               pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
+               pr_warn("bus width %d instead %d bit\n",
                           (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
                           busw ? 16 : 8);
                return ERR_PTR(-EINVAL);
@@ -3472,14 +3473,13 @@ ident_done:
        if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
                chip->cmdfunc = nand_command_lp;
 
-       pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s)\n",
-               *maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
+       pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+               *maf_id, *dev_id);
+       pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
                chip->onfi_version ? chip->onfi_params.model : type->name);
-
-       pr_info("NAND device: %dMiB, %s, page size: %d, OOB size: %d\n",
+       pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
                (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
                mtd->writesize, mtd->oobsize);
-
        return type;
 }
 
@@ -3535,7 +3535,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
                chip->select_chip(mtd, -1);
        }
        if (i > 1)
-               pr_info("%d NAND chips detected\n", i);
+               pr_info("%d chips detected\n", i);
 
        /* Store the number of chips and calc total size for mtd */
        chip->numchips = i;