* Backport much of the 10.2 firmware features from upstream QCA driver.
This includes ANI support, adaptive CCA, tx-hang workarounds,
and lots of other things.
Not all of this may be enabled at this point, and more code waits to
be backported as time and motivation allows.
* Fix some rate-control issues where ath10k in station mode (at least), would
sometimes get stuck at low rates. This appeared to be a probe related
state machine issue in the firmware, so I added some timeout logic to kick
the state machine if it gets stuck. This signicantly improves throughput
tests with many stations.
* Support configuring WMI WD timeout using SET_SPECIAL API.
* Properly configure the rx-mask on bootup to work around problem found
by Mr. Kazior. This should remove the need to add the driver hack he
posted.
* Allow configuring pdev failed-retry threshold. This is how many consecutive
tx failures the firmware will allow before resetting the wifi chip (not a full
firmware crash).
Signed-off-by: Ben Greear <greearb@candelatech.com>
CATEGORY:=Firmware
endef
-QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-16.1.bin-lede
+QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-18.rc1-lede
QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-7.bin-lede.004
QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-7.bin-lede.004
define Download/ath10k-firmware-qca988x-ct
URL:=https://www.candelatech.com/downloads/
FILE:=$(QCA988X_FIRMWARE_FILE_CT)
- MD5SUM:=d7e081e9782936ed544b78994c9133fb
+ MD5SUM:=89b436bad5d80c57bbf74e498095c9d2
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct))