unsigned int lcdblk_offset;
unsigned int lcdblk_vt_shift;
unsigned int lcdblk_bypass_shift;
+ unsigned int lcdblk_mic_bypass_shift;
unsigned int has_shadowcon:1;
unsigned int has_clksel:1;
unsigned int has_limited_fmt:1;
unsigned int has_vidoutcon:1;
unsigned int has_vtsel:1;
+ unsigned int has_mic_bypass:1;
};
static struct fimd_driver_data s3c64xx_fimd_driver_data = {
.has_vtsel = 1,
};
+static struct fimd_driver_data exynos5420_fimd_driver_data = {
+ .timing_base = 0x20000,
+ .lcdblk_offset = 0x214,
+ .lcdblk_vt_shift = 24,
+ .lcdblk_bypass_shift = 15,
+ .lcdblk_mic_bypass_shift = 11,
+ .has_shadowcon = 1,
+ .has_vidoutcon = 1,
+ .has_vtsel = 1,
+ .has_mic_bypass = 1,
+};
+
struct fimd_context {
struct device *dev;
struct drm_device *drm_dev;
.data = &exynos4415_fimd_driver_data },
{ .compatible = "samsung,exynos5250-fimd",
.data = &exynos5_fimd_driver_data },
+ { .compatible = "samsung,exynos5420-fimd",
+ .data = &exynos5420_fimd_driver_data },
{},
};
MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
return;
}
+ /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
+ * bit should be cleared.
+ */
+ if (driver_data->has_mic_bypass && ctx->sysreg &&
+ regmap_update_bits(ctx->sysreg,
+ driver_data->lcdblk_offset,
+ 0x1 << driver_data->lcdblk_mic_bypass_shift,
+ 0x1 << driver_data->lcdblk_mic_bypass_shift)) {
+ DRM_ERROR("Failed to update sysreg for bypass mic.\n");
+ return;
+ }
+
/* setup horizontal and vertical display size. */
val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
VIDTCON2_HOZVAL(mode->hdisplay - 1) |
* clock. On these SoCs the bootloader may enable it but any
* power domain off/on will reset it to disable state.
*/
- if (ctx->driver_data != &exynos5_fimd_driver_data)
+ if (ctx->driver_data != &exynos5_fimd_driver_data ||
+ ctx->driver_data != &exynos5420_fimd_driver_data)
return;
val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;