mtd: atmel_nand: move the sanity check to the beginning of pmecc_enable()

It is better to do the sanity check for the parameter before any hardware
operation.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 1ffa52f7ab4abcfa33c116772265537c40a4054f..0e365daad9ccd42f44b359e10941a0d3d46df9cb 100644 (file)
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -905,15 +905,15 @@ static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
 {
        u32 val;
 
-       pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
-       pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
-       val = pmecc_readl_relaxed(host->ecc, CFG);
-
        if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
                dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
                return;
        }
 
+       pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+       pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+       val = pmecc_readl_relaxed(host->ecc, CFG);
+
        if (ecc_op == NAND_ECC_READ)
                pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
                        | PMECC_CFG_AUTO_ENABLE);