staging: comedi: cb_pcidas: tidy up ADC mux/control register

Rename this register and its bit defines so they have namespace
associated with the driver. Use the BIT macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 830904659a660f0bb8454469f5d22a78ceb66929..72395ea2876c9746d76c7d2fa3a9efd61701fd49 100644 (file)
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -97,17 +97,20 @@
 #define PCIDAS_CTRL_LADFUL     BIT(13) /* fifo overflow / clear */
 #define PCIDAS_CTRL_DAEMI      BIT(14) /* dac fifo empty int status / clear */
 
-#define ADCMUX_CONT            2       /* ADC CHANNEL MUX AND CONTROL reg */
-#define   BEGIN_SCAN(x)                ((x) & 0xf)
-#define   END_SCAN(x)          (((x) & 0xf) << 4)
-#define   GAIN_BITS(x)         (((x) & 0x3) << 8)
-#define   UNIP                 0x800   /* Analog front-end unipolar mode */
-#define   SE                   0x400   /* Inputs in single-ended mode */
-#define   PACER_MASK           0x3000  /* pacer source bits */
-#define   PACER_INT            0x1000  /* int. pacer */
-#define   PACER_EXT_FALL       0x2000  /* ext. falling edge */
-#define   PACER_EXT_RISE       0x3000  /* ext. rising edge */
-#define   EOC                  0x4000  /* adc not busy */
+#define PCIDAS_AI_REG          0x02    /* ADC CHANNEL MUX AND CONTROL reg */
+#define PCIDAS_AI_FIRST(x)     ((x) & 0xf)
+#define PCIDAS_AI_LAST(x)      (((x) & 0xf) << 4)
+#define PCIDAS_AI_CHAN(x)      (PCIDAS_AI_FIRST(x) | PCIDAS_AI_LAST(x))
+#define PCIDAS_AI_GAIN(x)      (((x) & 0x3) << 8)
+#define PCIDAS_AI_SE           BIT(10) /* Inputs in single-ended mode */
+#define PCIDAS_AI_UNIP         BIT(11) /* Analog front-end unipolar mode */
+#define PCIDAS_AI_PACER(x)     (((x) & 0x3) << 12)
+#define PCIDAS_AI_PACER_SW     PCIDAS_AI_PACER(0) /* software pacer */
+#define PCIDAS_AI_PACER_INT    PCIDAS_AI_PACER(1) /* int. pacer */
+#define PCIDAS_AI_PACER_EXTN   PCIDAS_AI_PACER(2) /* ext. falling edge */
+#define PCIDAS_AI_PACER_EXTP   PCIDAS_AI_PACER(3) /* ext. rising edge */
+#define PCIDAS_AI_PACER_MASK   PCIDAS_AI_PACER(3) /* pacer source bits */
+#define PCIDAS_AI_EOC          BIT(14) /* adc not busy */
 
 #define TRIG_CONTSTAT           4      /* TRIGGER CONTROL/STATUS register */
 #define   SW_TRIGGER           0x1     /* software start trigger */
@@ -333,8 +336,8 @@ static int cb_pcidas_ai_eoc(struct comedi_device *dev,
        struct cb_pcidas_private *devpriv = dev->private;
        unsigned int status;
 
-       status = inw(devpriv->pcibar1 + ADCMUX_CONT);
-       if (status & EOC)
+       status = inw(devpriv->pcibar1 + PCIDAS_AI_REG);
+       if (status & PCIDAS_AI_EOC)
                return 0;
        return -EBUSY;
 }
@@ -361,14 +364,14 @@ static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
        }
 
        /* set mux limits and gain */
-       bits = BEGIN_SCAN(chan) | END_SCAN(chan) | GAIN_BITS(range);
+       bits = PCIDAS_AI_CHAN(chan) | PCIDAS_AI_GAIN(range);
        /* set unipolar/bipolar */
        if (comedi_range_is_unipolar(s, range))
-               bits |= UNIP;
+               bits |= PCIDAS_AI_UNIP;
        /* set single-ended/differential */
        if (aref != AREF_DIFF)
-               bits |= SE;
-       outw(bits, devpriv->pcibar1 + ADCMUX_CONT);
+               bits |= PCIDAS_AI_SE;
+       outw(bits, devpriv->pcibar1 + PCIDAS_AI_REG);
 
        /* clear fifo */
        outw(0, devpriv->pcibar2 + PCIDAS_AI_FIFO_CLR_REG);
@@ -861,21 +864,21 @@ static int cb_pcidas_ai_cmd(struct comedi_device *dev,
        outw(0, devpriv->pcibar2 + PCIDAS_AI_FIFO_CLR_REG);
 
        /*  set mux limits, gain and pacer source */
-       bits = BEGIN_SCAN(CR_CHAN(cmd->chanlist[0])) |
-           END_SCAN(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])) |
-           GAIN_BITS(range0);
+       bits = PCIDAS_AI_FIRST(CR_CHAN(cmd->chanlist[0])) |
+              PCIDAS_AI_LAST(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])) |
+              PCIDAS_AI_GAIN(range0);
        /*  set unipolar/bipolar */
        if (comedi_range_is_unipolar(s, range0))
-               bits |= UNIP;
+               bits |= PCIDAS_AI_UNIP;
        /*  set singleended/differential */
        if (CR_AREF(cmd->chanlist[0]) != AREF_DIFF)
-               bits |= SE;
+               bits |= PCIDAS_AI_SE;
        /*  set pacer source */
        if (cmd->convert_src == TRIG_EXT || cmd->scan_begin_src == TRIG_EXT)
-               bits |= PACER_EXT_RISE;
+               bits |= PCIDAS_AI_PACER_EXTP;
        else
-               bits |= PACER_INT;
-       outw(bits, devpriv->pcibar1 + ADCMUX_CONT);
+               bits |= PCIDAS_AI_PACER_INT;
+       outw(bits, devpriv->pcibar1 + PCIDAS_AI_REG);
 
        /*  load counters */
        if (cmd->scan_begin_src == TRIG_TIMER ||
@@ -1034,8 +1037,7 @@ static int cb_pcidas_cancel(struct comedi_device *dev,
 
        /*  disable start trigger source and burst mode */
        outw(0, devpriv->pcibar1 + TRIG_CONTSTAT);
-       /*  software pacer source */
-       outw(0, devpriv->pcibar1 + ADCMUX_CONT);
+       outw(PCIDAS_AI_PACER_SW, devpriv->pcibar1 + PCIDAS_AI_REG);
 
        return 0;
 }