ipq40xx: wpj419: use existing label for PCIe node

WPJ419 is still manually defining PCIe node, so lets
convert it to use the existing upstream labels for PCIe node and while we
are here use the -gpios suffix instead.

Link: https://github.com/openwrt/openwrt/pull/15415
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
index 92b3fb399b4328c3d3d4c62190d48f2e5ed8efd3..d8977fe11749381da6916da7093be798a88640b7 100644 (file)
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wpj419.dts
@@ -269,12 +269,6 @@
                        reg = <0x1957000 0x100>;
                        qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
                };
-
-               pcie0: pci@40000000 {
-                       status = "okay";
-                       perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-                       wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-               };
        };
 
        keys {
@@ -352,6 +346,12 @@
        status = "okay";
 };
 
+&pcie0 {
+       status = "okay";
+       perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+       wake-gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+};
+
 &mdio {
        status = "okay";
        pinctrl-0 = <&mdio_pins>;