ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset()

Signed-off-by: ashish kalra <ashish.kalra@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index e076e1f2e4d1a85b6f795016a4169a7cabd49580..c3b0360047354fa59b897dd6f713e0ff25bdb170 100644 (file)
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -730,10 +730,6 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
        u8 *cfis;
        u32 Serror;
        int i = 0;
-       struct ata_queued_cmd qc;
-       u8 *buf;
-       dma_addr_t dma_address;
-       struct scatterlist *sg;
        unsigned long start_jiffies;
 
        DPRINTK("in xx_softreset\n");
@@ -833,9 +829,6 @@ try_offline_again:
         * reached here, we can send a command to the target device
         */
 
-       if (link->sactive)
-               goto skip_srst_do_ncq_error_handling;
-
        DPRINTK("Sending SRST/device reset\n");
 
        ata_tf_init(link->device, &tf);
@@ -903,69 +896,6 @@ try_offline_again:
         * command bit of the CCreg
         */
        iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-       goto check_device_signature;
-
-skip_srst_do_ncq_error_handling:
-
-       VPRINTK("Sending read log ext(10h) command\n");
-
-       memset(&qc, 0, sizeof(struct ata_queued_cmd));
-       ata_tf_init(link->device, &tf);
-
-       tf.command = ATA_CMD_READ_LOG_EXT;
-       tf.lbal = ATA_LOG_SATA_NCQ;
-       tf.nsect = 1;
-       tf.hob_nsect = 0;
-       tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
-       tf.protocol = ATA_PROT_PIO;
-
-       qc.tag = ATA_TAG_INTERNAL;
-       qc.scsicmd = NULL;
-       qc.ap = ap;
-       qc.dev = link->device;
-
-       qc.tf = tf;
-       qc.flags |= ATA_QCFLAG_RESULT_TF;
-       qc.dma_dir = DMA_FROM_DEVICE;
-
-       buf = ap->sector_buf;
-       ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
-
-       /*
-        * Need to DMA-map the memory buffer associated with the command
-        */
-
-       sg = qc.__sg;
-       dma_address = dma_map_single(ap->dev, qc.buf_virt,
-                                    sg->length, DMA_FROM_DEVICE);
-
-       sg_dma_address(sg) = dma_address;
-       sg_dma_len(sg) = sg->length;
-
-       VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
-
-       sata_fsl_qc_prep(&qc);
-       sata_fsl_qc_issue(&qc);
-
-       temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
-       if (temp & 0x1) {
-               VPRINTK("READ_LOG_EXT_10H issue failed\n");
-
-               VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
-                       ioread32(CQ + hcr_base),
-                       ioread32(CA + hcr_base), ioread32(CC + hcr_base));
-
-               sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
-
-               VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
-               VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
-               VPRINTK("Serror = 0x%x\n", Serror);
-               goto err;
-       }
-
-       iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-
-check_device_signature:
 
        DPRINTK("SATA FSL : Now checking device signature\n");