--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_qca_ap143.dtsi"
+
+/ {
+ model = "Qualcomm Atheros AP143 (16M) reference board";
+ compatible = "qca,ap143-16m", "qca,qca9533";
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0>;
+ label = "firmware";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+ };
+ };
+};
+
+&partitions {
+ fwconcat0: partition@50000 {
+ label = "fwconcat0";
+ reg = <0x050000 0xe30000>;
+ };
+
+ partition@e80000 {
+ label = "loader";
+ reg = <0xe80000 0x10000>;
+ };
+
+ fwconcat1: partition@e90000 {
+ label = "fwconcat1";
+ reg = <0xe90000 0x160000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_qca_ap143.dtsi"
+
+/ {
+ model = "Qualcomm Atheros AP143 (8M) reference board";
+ compatible = "qca,ap143-8m", "qca,qca9533";
+
+ virtual_flash {
+ compatible = "mtd-concat";
+ devices = <&fwconcat0 &fwconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0>;
+ label = "firmware";
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+ };
+ };
+};
+
+&partitions {
+ fwconcat0: partition@50000 {
+ label = "fwconcat0";
+ reg = <0x050000 0x630000>;
+ };
+
+ partition@680000 {
+ label = "loader";
+ reg = <0x680000 0x10000>;
+ };
+
+ fwconcat1: partition@690000 {
+ label = "fwconcat1";
+ reg = <0x690000 0x160000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "green:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "green:wps";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
ucidef_set_led_switch "lan3" "LAN3" "blue:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x02"
;;
+qca,ap143-8m|\
+qca,ap143-16m)
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
+ ;;
qihoo,c301)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
;;
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan"
;;
- comfast,cf-e560ac)
+ comfast,cf-e560ac|\
+ qca,ap143-8m|\
+ qca,ap143-16m)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
cat "$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE)" >> "$@"
endef
+define Build/append-loader-okli-uimage
+ cat "$(KDIR)/loader-$(word 1,$(1)).uImage" >> "$@"
+endef
+
define Build/relocate-kernel
rm -rf $@.relocate
$(CP) ../../generic/image/relocate $@.relocate
endef
TARGET_DEVICES += plasmacloud_pa300e
+define Device/qca_ap143
+ SOC := qca9533
+ DEVICE_VENDOR := Qualcomm Atheros
+ DEVICE_MODEL := AP143
+ DEVICE_PACKAGES := kmod-usb2
+ SUPPORTED_DEVICES += ap143
+ LOADER_TYPE := bin
+ LOADER_FLASH_OFFS := 0x50000
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+endef
+
+define Device/qca_ap143-8m
+ $(Device/qca_ap143)
+ DEVICE_VARIANT := (8M)
+ IMAGE_SIZE := 7744k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | pad-to 6336k | \
+ append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += qca_ap143-8m
+
+define Device/qca_ap143-16m
+ $(Device/qca_ap143)
+ DEVICE_VARIANT := (16M)
+ IMAGE_SIZE := 15936k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
+ append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += qca_ap143-16m
+
define Device/qihoo_c301
$(Device/seama)
SOC := ar9344
projects / openwrt / staging / hauke.git / commitdiff