+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -48,6 +48,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
-+#include <asm/time.h>
-
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1542,6 +1543,8 @@ void __cpuinit per_cpu_trap_init(void)
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
- */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-
+++ /dev/null
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -15,6 +15,22 @@
- #include <asm/cevt-r4k.h>
-
- /*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
-+/*
- * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
- * of these routines with SMTC-specific variants.
- */
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- return res;
- }
-@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
- return (read_c0_cause() >> cp0_compare_irq) & 0x100;
- }
-
--/*
-- * Compare interrupt can be routed and latched outside the core,
-- * so a single execution hazard barrier may not be enough to give
-- * it time to clear as seen in the Cause register. 4 time the
-- * pipeline depth seems reasonably conservative, and empirically
-- * works better in configurations with high CPU/bus clock ratios.
-- */
--
--#define compare_change_hazard() \
-- do { \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- irq_disable_hazard(); \
-- } while (0)
--
- int c0_compare_int_usable(void)
- {
- unsigned int delta;
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1579,7 +1579,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -1667,7 +1667,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -607,6 +607,26 @@ ifdef CONFIG_PHYSICAL_START
- load-y = $(CONFIG_PHYSICAL_START)
- endif
-
-+#
-+# Ralink SoC common stuff
-+#
-+core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/
-+cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
-+
-+#
-+# Ralink RT288x
-+#
-+core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/
-+cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
-+load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000
-+
-+#
-+# Ralink RT305x
-+#
-+core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
-+cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
-+load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
-+
- # temporary until string.h is fixed
- cflags-y += -ffreestanding
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -22,6 +22,9 @@ choice
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-+config MIPS_RALINK
-+ bool "Ralink MIPS SoC based boards"
-+
- config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
-@@ -638,6 +641,7 @@ source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
- source "arch/mips/pmc-sierra/Kconfig"
-+source "arch/mips/ralink/Kconfig"
- source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
-@@ -989,7 +993,7 @@ config BOOT_ELF32
-
- config MIPS_L1_CACHE_SHIFT
- int
-- default "4" if MACH_DECSTATION || MIKROTIK_RB532
-+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || RALINK_RT288X
- default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- default "4" if PMC_MSP4200_EVAL
- default "5"
+++ /dev/null
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -289,9 +289,9 @@ static const struct serial8250_config ua
- },
- };
-
--#if defined (CONFIG_SERIAL_8250_AU1X00)
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
-
--/* Au1x00 UART hardware has a weird register layout */
-+/* Au1x00 and RT288x UART hardware has a weird register layout */
- static const u8 au_io_in_map[] = {
- [UART_RX] = 0,
- [UART_IER] = 2,
-@@ -409,7 +409,7 @@ static unsigned int mem32_serial_in(stru
- return readl(p->membase + offset);
- }
-
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined(CONFIG_SERIAL_8250_AU1X00) || defined(CONFIG_SERIAL_8250_RT288X)
- static unsigned int au_serial_in(struct uart_port *p, int offset)
- {
- offset = map_8250_in_reg(p, offset) << p->regshift;
-@@ -490,7 +490,7 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
-@@ -522,7 +522,7 @@ serial_out_sync(struct uart_8250_port *u
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- #endif
- case UPIO_DWAPB:
-@@ -560,8 +560,8 @@ static inline void _serial_dl_write(stru
- serial_outp(up, UART_DLM, value >> 8 & 0xff);
- }
-
--#if defined(CONFIG_SERIAL_8250_AU1X00)
--/* Au1x00 haven't got a standard divisor latch */
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
-+/* Au1x00 and RT288x haven't got a standard divisor latch */
- static int serial_dl_read(struct uart_8250_port *up)
- {
- if (up->port.iotype == UPIO_AU)
-@@ -768,22 +768,19 @@ static int size_fifo(struct uart_8250_po
- */
- static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
- {
-- unsigned char old_dll, old_dlm, old_lcr;
-+ unsigned char old_lcr;
-+ unsigned int old_dl;
- unsigned int id;
-
- old_lcr = serial_inp(p, UART_LCR);
- serial_outp(p, UART_LCR, UART_LCR_DLAB);
-
-- old_dll = serial_inp(p, UART_DLL);
-- old_dlm = serial_inp(p, UART_DLM);
-+ old_dl = serial_dl_read(p);
-
-- serial_outp(p, UART_DLL, 0);
-- serial_outp(p, UART_DLM, 0);
-+ serial_dl_write(p, 0);
-+ id = serial_dl_read(p);
-
-- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
--
-- serial_outp(p, UART_DLL, old_dll);
-- serial_outp(p, UART_DLM, old_dlm);
-+ serial_dl_write(p, old_dl);
- serial_outp(p, UART_LCR, old_lcr);
-
- return id;
-@@ -1205,7 +1202,7 @@ static void autoconfig(struct uart_8250_
- }
- #endif
-
--#ifdef CONFIG_SERIAL_8250_AU1X00
-+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -266,6 +266,14 @@ config SERIAL_8250_AU1X00
- say Y to this option. The driver can handle up to 4 serial ports,
- depending on the SOC. If unsure, say N.
-
-+config SERIAL_8250_RT288X
-+ bool "Ralink RT288x/RT305x serial port support"
-+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
-+ help
-+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
-+ serial port, say Y to this option. The driver can handle up to 2 serial
-+ ports. If unsure, say N.
-+
- config SERIAL_8250_RM9K
- bool "Support for MIPS RM9xxx integrated serial port"
- depends on SERIAL_8250 != n && SERIAL_RM9000
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -269,7 +269,7 @@ struct uart_port {
- #define UPIO_HUB6 (1)
- #define UPIO_MEM (2)
- #define UPIO_MEM32 (3)
--#define UPIO_AU (4) /* Au1x00 type IO */
-+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_DWAPB (6) /* DesignWare APB UART */
- #define UPIO_RM9000 (7) /* RM9000 type IO */
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
+++ /dev/null
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -612,6 +612,12 @@ config MIPS_AU1X00_ENET
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
-+config MIPS_RAMIPS_NET
-+ tristate "Ethernet driver for rt288x/rt305x"
-+ depends on MIPS_RALINK
-+ help
-+ This driver supports the etehrnet mac inside the ralink wisocs
-+
- config SGI_IOC3_ETH
- bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -204,6 +204,7 @@ obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
-+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
- obj-$(CONFIG_ATARILANCE) += atarilance.o
+++ /dev/null
---- a/arch/mips/kernel/mips_machine.c
-+++ b/arch/mips/kernel/mips_machine.c
-@@ -7,12 +7,13 @@
- *
- */
- #include <linux/mm.h>
-+#include <linux/string.h>
-
- #include <asm/mips_machine.h>
--#include <asm/bootinfo.h>
-
- static struct list_head mips_machines __initdata =
- LIST_HEAD_INIT(mips_machines);
-+static char *mips_machid __initdata;
-
- char *mips_machine_name = "Unknown";
-
-@@ -55,20 +56,65 @@ void __init mips_machine_set_name(char *
- }
- }
-
--void __init mips_machine_setup(unsigned long machtype)
-+void __init mips_machine_setup(void)
- {
- struct mips_machine *mach;
-
-- mach = mips_machine_find(machtype);
-+ mach = mips_machine_find(mips_machtype);
- if (!mach) {
-- printk(KERN_ALERT "MIPS: no machine registered for "
-- "machtype %lu\n", machtype);
-+ printk(KERN_WARNING "MIPS: no machine registered for "
-+ "machtype %lu\n", mips_machtype);
- return;
- }
-
- mips_machine_set_name(mach->mach_name);
-- printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
-+ printk(KERN_NOTICE "MIPS: machine is %s\n", mips_machine_name);
-
- if (mach->mach_setup)
- mach->mach_setup();
- }
-+
-+int __init mips_machtype_setup(char *id)
-+{
-+ if (mips_machid == NULL)
-+ mips_machid = id;
-+
-+ return 1;
-+}
-+
-+__setup("machtype=", mips_machtype_setup);
-+
-+static int __init mips_machtype_init(void)
-+{
-+ struct list_head *this;
-+ struct mips_machine *mach;
-+
-+ if (mips_machid == NULL)
-+ return 0;
-+
-+ list_for_each(this, &mips_machines) {
-+ mach = list_entry(this, struct mips_machine, list);
-+ if (mach->mach_id == NULL)
-+ continue;
-+
-+ if (strcmp(mach->mach_id, mips_machid) == 0) {
-+ mips_machtype = mach->mach_type;
-+ return 0;
-+ }
-+ }
-+
-+ printk(KERN_WARNING
-+ "MIPS: no machine found for id: '%s', registered machines:\n",
-+ mips_machid);
-+ printk(KERN_WARNING "%32s %s\n", "id", "name");
-+
-+ list_for_each(this, &mips_machines) {
-+ mach = list_entry(this, struct mips_machine, list);
-+ printk(KERN_WARNING "%32s %s\n",
-+ mach->mach_id ? mach->mach_id : "", mach->mach_name);
-+ }
-+
-+ return 0;
-+}
-+
-+core_initcall(mips_machtype_init);
---- a/arch/mips/include/asm/mips_machine.h
-+++ b/arch/mips/include/asm/mips_machine.h
-@@ -13,25 +13,33 @@
- #include <linux/init.h>
- #include <linux/list.h>
-
-+#include <asm/bootinfo.h>
-+
- struct mips_machine {
- unsigned long mach_type;
-- void (*mach_setup)(void);
-+ char *mach_id;
- char *mach_name;
-+ void (*mach_setup)(void);
- struct list_head list;
- };
-
- void mips_machine_register(struct mips_machine *) __init;
--void mips_machine_setup(unsigned long machtype) __init;
-+void mips_machine_setup(void) __init;
-+int mips_machtype_setup(char *id) __init;
- void mips_machine_set_name(char *name) __init;
-
- extern char *mips_machine_name;
-
--#define MIPS_MACHINE(_type, _name, _setup) \
--static char machine_name_##_type[] __initdata = _name; \
-+#define MIPS_MACHINE(_type, _id, _name, _setup) \
-+static const char machine_name_##_type[] __initconst \
-+ __aligned(1) = _name; \
-+static const char machine_id_##_type[] __initconst \
-+ __aligned(1) = _id; \
- static struct mips_machine machine_##_type __initdata = \
- { \
- .mach_type = _type, \
-- .mach_name = machine_name_##_type, \
-+ .mach_id = (char *) machine_id_##_type, \
-+ .mach_name = (char *) machine_name_##_type, \
- .mach_setup = _setup, \
- }; \
- \
-@@ -44,4 +52,3 @@ static int __init register_machine_##_ty
- pure_initcall(register_machine_##_type)
-
- #endif /* __ASM_MIPS_MACHINE_H */
--
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-# CONFIG_MIPS_RAMIPS_NET is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT288X=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=m
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MII is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_RALINK=y
-CONFIG_MIPS_RAMIPS_NET=y
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-# CONFIG_RALINK_RT288X is not set
-CONFIG_RALINK_RT305X=y
-CONFIG_RT305X_MACH_DIR_300_REVB=y
-CONFIG_RT305X_MACH_FONERA20N=y
-CONFIG_RT305X_MACH_V22RW_2X2=y
-CONFIG_RT305X_MACH_WHR_G300N=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SLUB=y
-CONFIG_SOC_RT305X=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
projects / openwrt / staging / ynezz.git / commitdiff