octeon: apply vendor_model scheme to device definition/image name

This updates the device definition name for octeon target to provide
more useful names for the images and be consistent with the increasing
number of targets following that scheme.

Since the target is not using device tree yet, this does not touch
board_name and thus sets BOARD_NAME in image Makefile to ensure
sysupgrade is still working.

While at it, move Build block before Device blocks and remove trailing
whitespace for CMDLINE.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/octeon/image/Makefile b/target/linux/octeon/image/Makefile
index 42bd5df1da6a7cf0e0b5326784b294a598fbe13b..e083e823c2211b2228c6f84cf3aae26422234ad5 100644 (file)
--- a/target/linux/octeon/image/Makefile
+++ b/target/linux/octeon/image/Makefile
@@ -7,6 +7,11 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+define Build/strip-kernel
+       # Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes section
+       $(TARGET_CROSS)strip -R .notes $@ -o $@.stripped && mv $@.stripped $@
+endef
+
 define Device/Default
   PROFILES = Default $$(DEVICE_NAME)
   KERNEL_NAME := vmlinux.elf
@@ -17,11 +22,6 @@ define Device/Default
   IMAGE/sysupgrade.tar := sysupgrade-tar
 endef
 
-define Build/strip-kernel
-       # Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes section
-       $(TARGET_CROSS)strip -R .notes $@ -o $@.stripped && mv $@.stripped $@
-endef
-
 define Device/generic
   DEVICE_VENDOR := Generic
   DEVICE_MODEL := Octeon
@@ -30,19 +30,21 @@ endef
 TARGET_DEVICES += generic
 
 ER_CMDLINE:=-mtdparts=phys_mapped_flash:640k(boot0)ro,640k(boot1)ro,64k(eeprom)ro root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
-define Device/er
+define Device/ubnt_edgerouter
   DEVICE_VENDOR := Ubiquiti
   DEVICE_MODEL := EdgeRouter
-  CMDLINE := $(ER_CMDLINE) 
+  BOARD_NAME := er
+  CMDLINE := $(ER_CMDLINE)
 endef
-TARGET_DEVICES += er
+TARGET_DEVICES += ubnt_edgerouter
 
 ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait
-define Device/erlite
+define Device/ubnt_edgerouter-lite
   DEVICE_VENDOR := Ubiquiti
   DEVICE_MODEL := EdgeRouter Lite
-  CMDLINE := $(ERLITE_CMDLINE) 
+  BOARD_NAME := erlite
+  CMDLINE := $(ERLITE_CMDLINE)
 endef
-TARGET_DEVICES += erlite
+TARGET_DEVICES += ubnt_edgerouter-lite
 
 $(eval $(call BuildImage))