ath79: refactor dts of TP-Link CPE710-v1

This is done in preparation of adding support for the CPE710-v2,
which uses a similiar device tree.

Signed-off-by: Tim Noack <tim@noack.id>
Link: https://github.com/openwrt/openwrt/pull/16637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 832cc8ce04122ea726178687b5168187b2465f7f)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>

diff --git a/target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts b/target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts
index 6d1b58f95fae48f3e3d1c06b9b54dc1875710b0f..31e04232ab6c5af79179483bb52f4884cabd0ef2 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts
@@ -1,151 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca956x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "qca9563_tplink_cpe710.dtsi"
 
 / {
        model = "TP-Link CPE710 v1";
        compatible = "tplink,cpe710-v1", "qca,qca9563";
-
-       aliases {
-               label-mac-device = &eth0;
-               led-boot = &led_lan;
-               led-failsafe = &led_lan;
-               led-upgrade = &led_lan;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_lan: lan {
-                       function = LED_FUNCTION_LAN;
-                       color = <LED_COLOR_ID_BLUE>;
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan5g {
-                       label = "blue:wlan5g";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "qcom,ath10k";
-               reg = <0x0000 0 0 0 0>;
-               nvmem-cells = <&precal_art_5000>, <&macaddr_info_8>;
-               nvmem-cell-names = "pre-calibration", "mac-address";
-       };
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               label = "partition-table";
-                               reg = <0x050000 0x010000>;
-                               read-only;
-                       };
-
-                       info: partition@60000 {
-                               label = "info";
-                               reg = <0x060000 0x010000>;
-                               read-only;
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       macaddr_info_8: macaddr@8 {
-                                               reg = <0x8 0x6>;
-                                       };
-                               };
-                       };
-
-                       partition@70000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x070000 0xf50000>;
-                       };
-
-                       partition@fc0000 {
-                               label = "config";
-                               reg = <0xfc0000 0x030000>;
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       precal_art_5000: pre-calibration@5000 {
-                                               reg = <0x5000 0x2f20>;
-                                       };
-                               };
-                       };
-               };
-       };
-};
-
-&pinmux {
-       mdio_pins: mdio_pins {
-               /* GPIO 10 as MDIO(0x20), GPIO 8 as MDC(0x21) */
-               pinctrl-single,bits = <0x8 0x00200021 0x00ff00ff>;
-       };
 };
 
 &mdio0 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&mdio_pins>;
-
        phy4: ethernet-phy@4 {
                reg = <4>;
                reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
@@ -153,17 +15,6 @@
 };
 
 &eth0 {
-       status = "okay";
-
        phy-handle = <&phy4>;
        phy-mode = "sgmii";
-
-       nvmem-cells = <&macaddr_info_8>;
-       nvmem-cell-names = "mac-address";
-
-       qca956x-serdes-fixup;
-
-       gmac-config {
-               device = <&gmac>;
-       };
 };

diff --git a/target/linux/ath79/dts/qca9563_tplink_cpe710.dtsi b/target/linux/ath79/dts/qca9563_tplink_cpe710.dtsi
new file mode 100644 (file)
index 0000000..9de36f3
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_cpe710.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       aliases {
+               led-boot = &led_lan;
+               led-failsafe = &led_lan;
+               led-upgrade = &led_lan;
+               label-mac-device = &eth0;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_lan: lan {
+                       function = LED_FUNCTION_LAN;
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan5g {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_WLAN_5GHZ;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0x0000 0 0 0 0>;
+               nvmem-cells = <&precal_art_5000>, <&macaddr_info_8>;
+               nvmem-cell-names = "pre-calibration", "mac-address";
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "partition-table";
+                               reg = <0x050000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "info";
+                               reg = <0x060000 0x010000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_info_8: macaddr@8 {
+                                               reg = <0x8 0x6>;
+                                       };
+                               };
+                       };
+
+                       partition@70000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x070000 0xf50000>;
+                       };
+
+                       partition@fc0000 {
+                               label = "config";
+                               reg = <0xfc0000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       precal_art_5000: pre-calibration@5000 {
+                                               reg = <0x5000 0x2f20>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&pinmux {
+       mdio_pins: mdio_pins {
+               /* GPIO 10 as MDIO(0x20), GPIO 8 as MDC(0x21) */
+               pinctrl-single,bits = <0x8 0x00200021 0x00ff00ff>;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio_pins>;
+};
+
+&eth0 {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_info_8>;
+       nvmem-cell-names = "mac-address";
+
+       qca956x-serdes-fixup;
+
+       gmac-config {
+               device = <&gmac>;
+       };
+};