CPU_SUBTYPE:=vfpv3
MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
-KERNEL_PATCHVER:=3.14
+KERNEL_PATCHVER:=3.18
KERNELNAME:=zImage dtbs
DEFAULT_PACKAGES += uboot-envtools uboot-sunxi kmod-eeprom-sunxi kmod-wdt-sunxi
"Cubietech Cubieboard" |\
"Cubietech Cubieboard2" |\
"Lemaker bananaPi" |\
+"LeMaker Banana Pi" |\
+"LeMaker Banana Pro" |\
"LinkSprite pcDuino" |\
"LinkSprite pcDuino V3" |\
"LinkSprite pcDuino3" |\
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_ARCH_NR_GPIO=416
-# CONFIG_ARCH_QCOM is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_720789=y
# CONFIG_ATA_SFF is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_AVERAGE=y
CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_PXA is not set
CONFIG_COMPACTION=y
CONFIG_CONFIGFS_FS=y
CONFIG_CONNECTOR=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_FRAME_POINTER=y
CONFIG_FRAME_WARN=2048
CONFIG_FREEZER=y
-# CONFIG_FSL_EDMA is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GARP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNFS=y
# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_KSM=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_DEBUG=y
CONFIG_MMC_SUNXI=y
CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_SPLIT_SUPPORT=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NAMESPACES=y
-# CONFIG_NBPFAXI_DMA is not set
CONFIG_NEED_DMA_MAP_STATE=y
# CONFIG_NEON is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_REGMAP_IRQ=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AXP20X=y
-# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_RELAY=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SCHED_HRTICK=y
CONFIG_SCSI=y
+CONFIG_SDIO_UART=y
CONFIG_SECURITYFS=y
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIO=y
# CONFIG_SERIO_APBPS2 is not set
CONFIG_SERIO_SERPORT=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_X86=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_INFLATE=y
sun4i-a10-pcduino \
sun5i-a13-olinuxino \
sun6i-a31-colombus \
+ sun6i-a31-m9 \
sun7i-a20-bananapi \
+ sun7i-a20-bananapro \
sun7i-a20-cubieboard2 \
sun7i-a20-cubietruck \
sun7i-a20-olinuxino-lime \
rm -f $(KDIR)/boot.img
mkdosfs $(KDIR)/boot.img -C $(FAT32_BLOCKS)
- mcopy -i $(KDIR)/boot.img $(BIN_DIR)/uboot-sunxi-$(PROFILE)/openwrt-sunxi-$(PROFILE)-uEnv.txt ::uEnv.txt
+ mcopy -i $(KDIR)/boot.img $(BIN_DIR)/uboot-sunxi-$(PROFILE)/openwrt-sunxi-$(PROFILE)-boot.scr ::boot.scr
mcopy -i $(KDIR)/boot.img $(BIN_DIR)/$(2).dtb ::dtb
mcopy -i $(KDIR)/boot.img $(BIN_DIR)/$(IMG_PREFIX)-uImage ::uImage
$(call Image/Build/SDCard,$(1),sun7i-a20-bananapi)
endef
+define Image/Build/Profile/Bananapro
+ $(call Image/Build/SDCard,$(1),sun7i-a20-bananapro)
+endef
+
define Image/Build/Profile/Cubieboard
$(call Image/Build/SDCard,$(1),sun4i-a10-cubieboard)
endef
$(call Image/Build/SDCard,$(1),sun7i-a20-cubieboard2)
endef
+define Image/Build/Profile/Cubietruck
+ $(call Image/Build/SDCard,$(1),sun7i-a20-cubietruck)
+endef
+
define Image/Build/Profile/OLIMEX-A13-SOM
$(call Image/Build/SDCard,$(1),sun5i-a13-olinuxino)
endef
-define Image/Build/Profile/pcDuino
+define Image/Build/Profile/Mele_M9
+ $(call Image/Build/SDCard,$(1),sun6i-a31-hummingbird)
+endef
+
+define Image/Build/Profile/Linksprite_pcDuino
$(call Image/Build/SDCard,$(1),sun4i-a10-pcduino)
endef
+++ /dev/null
-From 4bfd40ed0046299e4a5ffba31bfbbcc39cf74e03 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Thu, 23 Oct 2014 17:49:30 +0100
-Subject: [PATCH] AHCI: Fix threaded interrupt setup
-
-Commit 18dcf433f3de (AHCI: Optimize single IRQ interrupt processing)
-switched the single IRQ case of the AHCI driver to use threaded
-threaded interrupts.
-
-During this conversion, only the IRQF_SHARED flag was provided. The net
-effect of this in the presence of level interrupts is that the
-interrupt will not be masked during the execution of the treaded
-handler, leading to a screaming interrupt if the thread is not
-scheduled quickly enough, specially in error conditions:
-
-[ 2.728051] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
-[ 2.735578] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
-[ 2.742792] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
-[ 2.751789] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
-[ 2.761539] scsi host0: ahci_platform
-[ 2.765754] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
-[...]
-[ 3.127977] ata1: SATA link down (SStatus 0 SControl 300)
-[...]
-[ 3.162035] Waiting for root device /dev/sda1...
-[ 3.163700] random: nonblocking pool is initialized
-[ 3.326593] irq 88: nobody cared (try booting with the "irqpoll" option)
-[ 3.333296] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1+ #3077
-[ 3.339936] [<c002b318>] (unwind_backtrace) from [<c0026980>] (show_stack+0x20/0x24)
-[ 3.347681] [<c0026980>] (show_stack) from [<c067dd18>] (dump_stack+0x9c/0xd4)
-[ 3.354904] [<c067dd18>] (dump_stack) from [<c007ac08>] (__report_bad_irq+0x38/0xd4)
-[ 3.362643] [<c007ac08>] (__report_bad_irq) from [<c007b1dc>] (note_interrupt+0x280/0x2d0)
-[ 3.370903] [<c007b1dc>] (note_interrupt) from [<c0078a70>] (handle_irq_event_percpu+0x210/0x27c)
-[ 3.379771] [<c0078a70>] (handle_irq_event_percpu) from [<c0078b28>] (handle_irq_event+0x4c/0x6c)
-[ 3.388636] [<c0078b28>] (handle_irq_event) from [<c007b860>] (handle_fasteoi_irq+0xbc/0x1a0)
-[ 3.397156] [<c007b860>] (handle_fasteoi_irq) from [<c0077f5c>] (generic_handle_irq+0x3c/0x4c)
-[ 3.405764] [<c0077f5c>] (generic_handle_irq) from [<c0078220>] (__handle_domain_irq+0x6c/0xb4)
-[ 3.414456] [<c0078220>] (__handle_domain_irq) from [<c0008754>] (gic_handle_irq+0x34/0x6c)
-[ 3.422802] [<c0008754>] (gic_handle_irq) from [<c0027540>] (__irq_svc+0x40/0x74)
-[ 3.430274] Exception stack(0xc09c1df8 to 0xc09c1e40)
-[ 3.435321] 1de0: 00000001 c0a27ec0
-[ 3.443491] 1e00: 00000000 00000000 c09c0028 0000001e 00000282 00000000 ee00c400 c0a239f8
-[ 3.451660] 1e20: c09c0000 c09c1ea4 c0a27ec0 c09c1e40 00200000 c003c7cc 20000113 ffffffff
-[ 3.459835] [<c0027540>] (__irq_svc) from [<c003c7cc>] (__do_softirq+0xbc/0x34c)
-[ 3.467229] [<c003c7cc>] (__do_softirq) from [<c003cd44>] (irq_exit+0xbc/0x104)
-[ 3.474536] [<c003cd44>] (irq_exit) from [<c0078224>] (__handle_domain_irq+0x70/0xb4)
-[ 3.482362] [<c0078224>] (__handle_domain_irq) from [<c0008754>] (gic_handle_x74)
-[ 3.498169] Exception stack(0xc09c1f10 to 0xc09c1f58)
-[ 3.503216] 1f00: ee7ca310 00000000 00000ab4 c0035560
-[ 3.511386] 1f20: c09c0000 00000000 c0a23f84 c09c8474 c09c84bc c09c0000 c0688bf8 c09c1f64
-[ 3.519554] 1f40: c09c1f68 c09c1f58 c00235d8 c00235dc 60000113 ffffffff
-[ 3.526165] [<c0027540>] (__irq_svc) from [<c00235dc>] (arch_cpu_idle+0x48/0x4c)
-[ 3.533557] [<c00235dc>] (arch_cpu_idle) from [<c00701fc>] (cpu_startup_entry+0x13c/0x27c)
-[ 3.541816] [<c00701fc>] (cpu_startup_entry) from [<c067af1c>] (rest_init+0x94/0x98)
-[ 3.549557] [<c067af1c>] (rest_init) from [<c093dd38>] (start_kernel+0x3f0/0x3fc)
-[ 3.557036] [<c093dd38>] (start_kernel) from [<40008084>] (0x40008084)
-[ 3.563555] handlers:
-[ 3.565830] [<c03a1a80>] ahci_single_irq_intr threaded [<c03a223c>] ahci_thread_fn
-[ 3.573415] Disabling IRQ #88
-[ 3.576532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen
-[ 3.583977] ata1: irq_stat 0x00400040, connection status changed
-[ 3.590006] ata1: SError: { RecovComm PHYRdyChg CommWake DevExch }
-[ 3.596209] ata1: hard resetting link
-[...]
-
-Not good. The culprit is a missing IRQF_ONESHOT flag, which addition
-solves the problem entierly. The number of interrupts drops radically:
-
-[Booting Debian Jessie to a prompt]
-Before fix:
- 88: 3562 0 GIC 88 ahci-sunxi
-After fix:
- 88: 1992 0 GIC 88 ahci-sunxi
-
-Tested on a A20 board (ahci-sunxi).
-
-Cc: Alexander Gordeev <agordeev@redhat.com>
-Cc: Tejun Heo <tj@kernel.org>
-Cc: linux-ide@vger.kernel.org
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- drivers/ata/libahci.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
-index 5eb61c9..49c649f 100644
---- a/drivers/ata/libahci.c
-+++ b/drivers/ata/libahci.c
-@@ -2492,7 +2492,7 @@ static int ahci_host_activate_single_irq(struct ata_host *host, int irq,
- return rc;
-
- rc = devm_request_threaded_irq(host->dev, irq, ahci_single_irq_intr,
-- ahci_thread_fn, IRQF_SHARED,
-+ ahci_thread_fn, IRQF_SHARED | IRQF_ONESHOT,
- dev_driver_string(host->dev), host);
- if (rc)
- return rc;
--- /dev/null
+diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile
+--- old/arch/arm/boot/dts/Makefile 2015-01-06 09:29:23.612462619 +0100
++++ new/arch/arm/boot/dts/Makefile 2015-01-06 09:29:36.316254352 +0100
+@@ -436,6 +436,7 @@
+ sun6i-a31-m9.dtb
+ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-bananapi.dtb \
++ sun7i-a20-bananapro.dtb \
+ sun7i-a20-cubieboard2.dtb \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+--- old/arch/arm/boot/dts/sun7i-a20-bananapro.dts 1970-01-01 01:00:00.000000000 +0100
++++ new/arch/arm/boot/dts/sun7i-a20-bananapro.dts 2015-01-06 09:31:18.290582574 +0100
+@@ -0,0 +1,232 @@
++/*
++ * Copyright 2014 Zoltan HERPAI <wigyori@uid0.hu>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public
++ * License along with this library; if not, write to the Free
++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++ model = "LeMaker Banana Pro";
++ compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
++
++ soc@01c00000 {
++ spi0: spi@01c05000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins_a>;
++ status = "okay";
++ };
++
++ mmc0: mmc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 10 0>; /* PH10 */
++ cd-inverted;
++ status = "okay";
++ };
++
++ mmc3: mmc@01c12000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc3_pins_a>
++ vmmc-supply = <®_vmmc3>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ brcmf: bcrmf@1 {
++ reg = <1>;
++ ccompatible = "brcm,bcm4329-fmac";
++ interrupt-parent = <&pio>;
++ interrupts = <10 8>; /* PH10 / EINT10 * taken from https://github.com/Bananian/fex/blob/master/BananaPro/BananaPro.fex.otg-off */
++ interrupt-names = "host-wake";
++ };
++ };
++
++ usbphy: phy@01c13400 {
++ usb1_vbus-supply = <®_usb1_vbus>;
++ usb2_vbus-supply = <®_usb2_vbus>;
++ status = "okay";
++ };
++
++ ehci0: usb@01c14000 {
++ status = "okay";
++ };
++
++ ohci0: usb@01c14400 {
++ status = "okay";
++ };
++
++ ahci: sata@01c18000 {
++ status = "okay";
++ };
++
++ ehci1: usb@01c1c000 {
++ status = "okay";
++ };
++
++ ohci1: usb@01c1c400 {
++ status = "okay";
++ };
++
++ pinctrl@01c20800 {
++ mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
++ allwinner,pins = "PH10";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <1>;
++ };
++
++ gmac_power_pin_bananapro: gmac_power_pin@0 {
++ allwinner,pins = "PH23";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ led_pins_bananapro: led_pins@0 {
++ allwinner,pins = "PH24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++ };
++
++ ir0: ir@01c21800 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_pins_a>;
++ status = "okay";
++ };
++
++ uart0: serial@01c28000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++ };
++
++ uart3: serial@01c28c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins_b>;
++ status = "okay";
++ };
++
++ uart7: serial@01c29c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart7_pins_a>;
++ status = "okay";
++ };
++
++ i2c0: i2c@01c2ac00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ compatible = "x-powers,axp209";
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 8>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ };
++ };
++
++ i2c2: i2c@01c2b400 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++ };
++
++ gmac: ethernet@01c50000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ phy-supply = <®_gmac_3v3>;
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_bananapro>;
++
++ green {
++ label = "bananapro:green:usr";
++ gpios = <&pio 7 24 0>;
++ };
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ status = "okay";
++ };
++
++ reg_usb2_vbus: usb2-vbus {
++ status = "okay";
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_power_pin_bananapro>;
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <50000>;
++ enable-active-high;
++ gpio = <&pio 7 23 0>;
++ };
++};
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Bananapro
+ NAME:=Bananapro
+ PACKAGES:=\
+ uboot-sunxi-Bananapro kmod-rtc-sunxi
+endef
+
+define Profile/Bananapro/Description
+ Package set optimized for the Bananapro
+endef
+
+$(eval $(call Profile,Bananapro))
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Cubietruck
+ NAME:=Cubietruck
+ PACKAGES:=\
+ uboot-sunxi-Cubietruck kmod-ata-sunxi kmod-rtc-sunxi kmod-brcmfmac
+endef
+
+define Profile/Cubietruck/Description
+ Package set optimized for the Cubietruck
+endef
+
+$(eval $(call Profile,Cubietruck))
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Mele_M9
+ NAME:=Mele_M9
+ PACKAGES:=\
+ uboot-sunxi-Mele_M9 kmod-sun4i-emac kmod-rtc-sunxi kmod-rtl8192cu
+endef
+
+define Profile/Mele_M9/Description
+ Package set optimized for the Mele M9
+endef
+
+$(eval $(call Profile,Mele_M9))
# See /LICENSE for more information.
#
-define Profile/pcDuino
- NAME:=pcDuino
+define Profile/Linksprite_pcDuino
+ NAME:=Linksprite_pcDuino
PACKAGES:=\
- uboot-sunxi-pcDuino kmod-sun4i-emac kmod-rtc-sunxi kmod-rtl8192cu
+ uboot-sunxi-Linksprite_pcDuino kmod-sun4i-emac kmod-rtc-sunxi kmod-rtl8192cu
endef
-define Profile/pcDuino/Description
- Package set optimized for the pcDuino
+define Profile/Linksprite_pcDuino/Description
+ Package set optimized for the Linksprite pcDuino
endef
-$(eval $(call Profile,pcDuino))
+$(eval $(call Profile,Linksprite_pcDuino))
projects / openwrt / staging / jogo.git / commitdiff