+)
+
+#endif /* _BCMENDIAN_H_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-12-16 23:39:10.700821500 +0100
-@@ -0,0 +1,229 @@
-+/*
-+ * Hardware-specific definitions for
-+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ * $Id$
-+ */
-+
-+#ifndef _bcmenet_47xx_h_
-+#define _bcmenet_47xx_h_
-+
-+#include <bcmenetmib.h>
-+#include <bcmenetrxh.h>
-+#include <bcmenetphy.h>
-+
-+#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */
-+#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */
-+#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */
-+#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */
-+
-+/* power management event wakeup pattern constants */
-+#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */
-+#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */
-+#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */
-+#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */
-+#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define _PADLINE(line) pad ## line
-+#define _XSTR(line) _PADLINE(line)
-+#define PAD _XSTR(__LINE__)
-+#endif /* PAD */
-+
-+/*
-+ * Host Interface Registers
-+ */
-+typedef volatile struct _bcmenettregs {
-+ /* Device and Power Control */
-+ uint32 devcontrol;
-+ uint32 PAD[2];
-+ uint32 biststatus;
-+ uint32 wakeuplength;
-+ uint32 PAD[3];
-+
-+ /* Interrupt Control */
-+ uint32 intstatus;
-+ uint32 intmask;
-+ uint32 gptimer;
-+ uint32 PAD[23];
-+
-+ /* Ethernet MAC Address Filtering Control */
-+ uint32 PAD[2];
-+ uint32 enetftaddr;
-+ uint32 enetftdata;
-+ uint32 PAD[2];
-+
-+ /* Ethernet MAC Control */
-+ uint32 emactxmaxburstlen;
-+ uint32 emacrxmaxburstlen;
-+ uint32 emaccontrol;
-+ uint32 emacflowcontrol;
-+
-+ uint32 PAD[20];
-+
-+ /* DMA Lazy Interrupt Control */
-+ uint32 intrecvlazy;
-+ uint32 PAD[63];
-+
-+ /* DMA engine */
-+ dma32regp_t dmaregs;
-+ dma32diag_t dmafifo;
-+ uint32 PAD[116];
-+
-+ /* EMAC Registers */
-+ uint32 rxconfig;
-+ uint32 rxmaxlength;
-+ uint32 txmaxlength;
-+ uint32 PAD;
-+ uint32 mdiocontrol;
-+ uint32 mdiodata;
-+ uint32 emacintmask;
-+ uint32 emacintstatus;
-+ uint32 camdatalo;
-+ uint32 camdatahi;
-+ uint32 camcontrol;
-+ uint32 enetcontrol;
-+ uint32 txcontrol;
-+ uint32 txwatermark;
-+ uint32 mibcontrol;
-+ uint32 PAD[49];
-+
-+ /* EMAC MIB counters */
-+ bcmenetmib_t mib;
-+
-+ uint32 PAD[585];
-+
-+ /* Sonics SiliconBackplane config registers */
-+ sbconfig_t sbconfig;
-+} bcmenetregs_t;
-+
-+/* device control */
-+#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */
-+#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */
-+#define DC_ER ((uint32)1 << 15) /* ephy reset */
-+#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */
-+#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */
-+#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */
-+#define DC_PA_SHIFT 18
-+#define DC_FS_MASK 0x03800000 /* fifo size (rev >= 8) */
-+#define DC_FS_SHIFT 23
-+#define DC_FS_4K 0 /* 4Kbytes */
-+#define DC_FS_512 1 /* 512bytes */
-+
-+/* wakeup length */
-+#define WL_P0_MASK 0x7f /* pattern 0 */
-+#define WL_D0 ((uint32)1 << 7)
-+#define WL_P1_MASK 0x7f00 /* pattern 1 */
-+#define WL_P1_SHIFT 8
-+#define WL_D1 ((uint32)1 << 15)
-+#define WL_P2_MASK 0x7f0000 /* pattern 2 */
-+#define WL_P2_SHIFT 16
-+#define WL_D2 ((uint32)1 << 23)
-+#define WL_P3_MASK 0x7f000000 /* pattern 3 */
-+#define WL_P3_SHIFT 24
-+#define WL_D3 ((uint32)1 << 31)
-+
-+/* intstatus and intmask */
-+#define I_PME ((uint32)1 << 6) /* power management event */
-+#define I_TO ((uint32)1 << 7) /* general purpose timeout */
-+#define I_PC ((uint32)1 << 10) /* descriptor error */
-+#define I_PD ((uint32)1 << 11) /* data error */
-+#define I_DE ((uint32)1 << 12) /* descriptor protocol error */
-+#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */
-+#define I_RO ((uint32)1 << 14) /* receive fifo overflow */
-+#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */
-+#define I_RI ((uint32)1 << 16) /* receive interrupt */
-+#define I_XI ((uint32)1 << 24) /* transmit interrupt */
-+#define I_EM ((uint32)1 << 26) /* emac interrupt */
-+#define I_MW ((uint32)1 << 27) /* mii write */
-+#define I_MR ((uint32)1 << 28) /* mii read */
-+
-+/* emaccontrol */
-+#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */
-+#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */
-+#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */
-+#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */
-+#define EMC_LC_SHIFT 5
-+
-+/* emacflowcontrol */
-+#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */
-+#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */
-+
-+/* interrupt receive lazy */
-+#define IRL_TO_MASK 0x00ffffff /* timeout */
-+#define IRL_FC_MASK 0xff000000 /* frame count */
-+#define IRL_FC_SHIFT 24 /* frame count */
-+
-+/* emac receive config */
-+#define ERC_DB ((uint32)1 << 0) /* disable broadcast */
-+#define ERC_AM ((uint32)1 << 1) /* accept all multicast */
-+#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */
-+#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */
-+#define ERC_LE ((uint32)1 << 4) /* loopback enable */
-+#define ERC_FE ((uint32)1 << 5) /* enable flow control */
-+#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */
-+#define ERC_RF ((uint32)1 << 7) /* reject filter */
-+#define ERC_CA ((uint32)1 << 8) /* cam absent */
-+
-+/* emac mdio control */
-+#define MC_MF_MASK 0x7f /* mdc frequency */
-+#define MC_PE ((uint32)1 << 7) /* mii preamble enable */
-+
-+/* emac mdio data */
-+#define MD_DATA_MASK 0xffff /* r/w data */
-+#define MD_TA_MASK 0x30000 /* turnaround value */
-+#define MD_TA_SHIFT 16
-+#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */
-+#define MD_RA_MASK 0x7c0000 /* register address */
-+#define MD_RA_SHIFT 18
-+#define MD_PMD_MASK 0xf800000 /* physical media device */
-+#define MD_PMD_SHIFT 23
-+#define MD_OP_MASK 0x30000000 /* opcode */
-+#define MD_OP_SHIFT 28
-+#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */
-+#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */
-+#define MD_SB_MASK 0xc0000000 /* start bits */
-+#define MD_SB_SHIFT 30
-+#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */
-+
-+/* emac intstatus and intmask */
-+#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */
-+#define EI_MIB ((uint32)1 << 1) /* mib interrupt */
-+#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */
-+
-+/* emac cam data high */
-+#define CD_V ((uint32)1 << 16) /* valid bit */
-+
-+/* emac cam control */
-+#define CC_CE ((uint32)1 << 0) /* cam enable */
-+#define CC_MS ((uint32)1 << 1) /* mask select */
-+#define CC_RD ((uint32)1 << 2) /* read */
-+#define CC_WR ((uint32)1 << 3) /* write */
-+#define CC_INDEX_MASK 0x3f0000 /* index */
-+#define CC_INDEX_SHIFT 16
-+#define CC_CB ((uint32)1 << 31) /* cam busy */
-+
-+/* emac ethernet control */
-+#define EC_EE ((uint32)1 << 0) /* emac enable */
-+#define EC_ED ((uint32)1 << 1) /* emac disable */
-+#define EC_ES ((uint32)1 << 2) /* emac soft reset */
-+#define EC_EP ((uint32)1 << 3) /* external phy select */
-+
-+/* emac transmit control */
-+#define EXC_FD ((uint32)1 << 0) /* full duplex */
-+#define EXC_FM ((uint32)1 << 1) /* flowmode */
-+#define EXC_SB ((uint32)1 << 2) /* single backoff enable */
-+#define EXC_SS ((uint32)1 << 3) /* small slottime */
-+
-+/* emac mib control */
-+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */
-+
-+#endif /* _bcmenet_47xx_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-12-16 23:39:10.700821500 +0100
-@@ -0,0 +1,81 @@
-+/*
-+ * Hardware-specific MIB definition for
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ * $Id$
-+ */
-+
-+#ifndef _bcmenetmib_h_
-+#define _bcmenetmib_h_
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define _PADLINE(line) pad ## line
-+#define _XSTR(line) _PADLINE(line)
-+#define PAD _XSTR(__LINE__)
-+#endif /* PAD */
-+
-+/*
-+ * EMAC MIB Registers
-+ */
-+typedef volatile struct {
-+ uint32 tx_good_octets;
-+ uint32 tx_good_pkts;
-+ uint32 tx_octets;
-+ uint32 tx_pkts;
-+ uint32 tx_broadcast_pkts;
-+ uint32 tx_multicast_pkts;
-+ uint32 tx_len_64;
-+ uint32 tx_len_65_to_127;
-+ uint32 tx_len_128_to_255;
-+ uint32 tx_len_256_to_511;
-+ uint32 tx_len_512_to_1023;
-+ uint32 tx_len_1024_to_max;
-+ uint32 tx_jabber_pkts;
-+ uint32 tx_oversize_pkts;
-+ uint32 tx_fragment_pkts;
-+ uint32 tx_underruns;
-+ uint32 tx_total_cols;
-+ uint32 tx_single_cols;
-+ uint32 tx_multiple_cols;
-+ uint32 tx_excessive_cols;
-+ uint32 tx_late_cols;
-+ uint32 tx_defered;
-+ uint32 tx_carrier_lost;
-+ uint32 tx_pause_pkts;
-+ uint32 PAD[8];
-+
-+ uint32 rx_good_octets;
-+ uint32 rx_good_pkts;
-+ uint32 rx_octets;
-+ uint32 rx_pkts;
-+ uint32 rx_broadcast_pkts;
-+ uint32 rx_multicast_pkts;
-+ uint32 rx_len_64;
-+ uint32 rx_len_65_to_127;
-+ uint32 rx_len_128_to_255;
-+ uint32 rx_len_256_to_511;
-+ uint32 rx_len_512_to_1023;
-+ uint32 rx_len_1024_to_max;
-+ uint32 rx_jabber_pkts;
-+ uint32 rx_oversize_pkts;
-+ uint32 rx_fragment_pkts;
-+ uint32 rx_missed_pkts;
-+ uint32 rx_crc_align_errs;
-+ uint32 rx_undersize;
-+ uint32 rx_crc_errs;
-+ uint32 rx_align_errs;
-+ uint32 rx_symbol_errs;
-+ uint32 rx_pause_pkts;
-+ uint32 rx_nonpause_pkts;
-+} bcmenetmib_t;
-+
-+#endif /* _bcmenetmib_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetphy.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetphy.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetphy.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetphy.h 2005-12-16 23:39:10.700821500 +0100
-@@ -0,0 +1,58 @@
-+/*
-+ * Misc Broadcom BCM47XX MDC/MDIO enet phy definitions.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ * $Id$
-+ */
-+
-+#ifndef _bcmenetphy_h_
-+#define _bcmenetphy_h_
-+
-+/* phy address */
-+#define MAXEPHY 32 /* mdio phy addresses are 5bit quantities */
-+#define EPHY_MASK 0x1f
-+#define EPHY_NONE 31 /* nvram: no phy present at all */
-+#define EPHY_NOREG 30 /* nvram: no local phy regs */
-+
-+/* just a few phy registers */
-+#define CTL_RESET (1 << 15) /* reset */
-+#define CTL_LOOP (1 << 14) /* loopback */
-+#define CTL_SPEED (1 << 13) /* speed selection 0=10, 1=100 */
-+#define CTL_ANENAB (1 << 12) /* autonegotiation enable */
-+#define CTL_RESTART (1 << 9) /* restart autonegotiation */
-+#define CTL_DUPLEX (1 << 8) /* duplex mode 0=half, 1=full */
-+
-+#define ADV_10FULL (1 << 6) /* autonegotiate advertise 10full */
-+#define ADV_10HALF (1 << 5) /* autonegotiate advertise 10half */
-+#define ADV_100FULL (1 << 8) /* autonegotiate advertise 100full */
-+#define ADV_100HALF (1 << 7) /* autonegotiate advertise 100half */
-+
-+/* link partner ability register */
-+#define LPA_SLCT 0x001f /* same as advertise selector */
-+#define LPA_10HALF 0x0020 /* can do 10mbps half-duplex */
-+#define LPA_10FULL 0x0040 /* can do 10mbps full-duplex */
-+#define LPA_100HALF 0x0080 /* can do 100mbps half-duplex */
-+#define LPA_100FULL 0x0100 /* can do 100mbps full-duplex */
-+#define LPA_100BASE4 0x0200 /* can do 100mbps 4k packets */
-+#define LPA_RESV 0x1c00 /* unused */
-+#define LPA_RFAULT 0x2000 /* link partner faulted */
-+#define LPA_LPACK 0x4000 /* link partner acked us */
-+#define LPA_NPAGE 0x8000 /* next page bit */
-+
-+#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
-+#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-+
-+#define STAT_REMFAULT (1 << 4) /* remote fault */
-+#define STAT_LINK (1 << 2) /* link status */
-+#define STAT_JAB (1 << 1) /* jabber detected */
-+#define AUX_FORCED (1 << 2) /* forced 10/100 */
-+#define AUX_SPEED (1 << 1) /* speed 0=10mbps 1=100mbps */
-+#define AUX_DUPLEX (1 << 0) /* duplex 0=half 1=full */
-+
-+#endif /* _bcmenetphy_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-12-16 23:39:10.700821500 +0100
-@@ -0,0 +1,43 @@
-+/*
-+ * Hardware-specific Receive Data Header for the
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ * $Id$
-+ */
-+
-+#ifndef _bcmenetrxh_h_
-+#define _bcmenetrxh_h_
-+
-+/*
-+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
-+ * with every frame consisting of
-+ * 16bits of frame length, followed by
-+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
-+ */
-+typedef volatile struct {
-+ uint16 len;
-+ uint16 flags;
-+ uint16 pad[12];
-+} bcmenetrxh_t;
-+
-+#define RXHDR_LEN 28
-+
-+#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */
-+#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */
-+#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */
-+#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */
-+#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */
-+#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */
-+#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */
-+#define RXF_CRC ((uint16)1 << 1) /* crc error */
-+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */
-+
-+#endif /* _bcmenetrxh_h_ */
diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h
--- linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-12-16 23:39:10.700821500 +0100
+#define NVRAM_MAX_PARAM_LEN 64
+
+#endif /* _bcmnvram_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmparams.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmparams.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bcmparams.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmparams.h 2005-12-16 23:39:10.700821500 +0100
-@@ -0,0 +1,25 @@
-+/*
-+ * Misc system wide parameters.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _bcmparams_h_
-+#define _bcmparams_h_
-+
-+#define VLAN_MAXVID 15 /* Max. VLAN ID supported/allowed */
-+
-+#define VLAN_NUMPRIS 8 /* # of prio, start from 0 */
-+
-+#define DEV_NUMIFS 16 /* Max. # of devices/interfaces supported */
-+
-+#define WL_MAXBSSCFG 16 /* maximum number of BSS Configs we can configure */
-+
-+#endif
diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h
--- linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-12-16 23:39:10.704821750 +0100
+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
+
+#endif /* _bcmutils_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bitfuncs.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bitfuncs.h
---- linux-2.4.32/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,85 @@
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-12-16 23:39:10.708822000 +0100
+@@ -0,0 +1,71 @@
+/*
-+ * bit manipulation utility functions
++ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
-+#ifndef _BITFUNCS_H
-+#define _BITFUNCS_H
-+
-+#include <typedefs.h>
++#ifndef _hnddma_h_
++#define _hnddma_h_
+
-+/* local prototypes */
-+static INLINE uint32 find_msbit(uint32 x);
++/* export structure */
++typedef volatile struct {
++ /* rx error counters */
++ uint rxgiants; /* rx giant frames */
++ uint rxnobuf; /* rx out of dma descriptors */
++ /* tx error counters */
++ uint txnobuf; /* tx out of dma descriptors */
++} hnddma_t;
+
++#ifndef di_t
++#define di_t void
++#endif
+
-+/*
-+ * find_msbit: returns index of most significant set bit in x, with index
-+ * range defined as 0-31. NOTE: returns zero if input is zero.
-+ */
++#ifndef osl_t
++#define osl_t void
++#endif
+
-+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
++/* externs */
++extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level);
++extern void dma_detach(di_t *di);
++extern void dma_txreset(di_t *di);
++extern void dma_rxreset(di_t *di);
++extern void dma_txinit(di_t *di);
++extern bool dma_txenabled(di_t *di);
++extern void dma_rxinit(di_t *di);
++extern void dma_rxenable(di_t *di);
++extern bool dma_rxenabled(di_t *di);
++extern void dma_txsuspend(di_t *di);
++extern void dma_txresume(di_t *di);
++extern bool dma_txsuspended(di_t *di);
++extern bool dma_txsuspendedidle(di_t *di);
++extern bool dma_txstopped(di_t *di);
++extern bool dma_rxstopped(di_t *di);
++extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
++extern void dma_fifoloopbackenable(di_t *di);
++extern void *dma_rx(di_t *di);
++extern void dma_rxfill(di_t *di);
++extern void dma_txreclaim(di_t *di, bool forceall);
++extern void dma_rxreclaim(di_t *di);
++extern uintptr dma_getvar(di_t *di, char *name);
++extern void *dma_getnexttxp(di_t *di, bool forceall);
++extern void *dma_peeknexttxp(di_t *di);
++extern void *dma_getnextrxp(di_t *di, bool forceall);
++extern void dma_txblock(di_t *di);
++extern void dma_txunblock(di_t *di);
++extern uint dma_txactive(di_t *di);
++extern void dma_txrotate(di_t *di);
+
-+/*
-+ * Implementation for Pentium processors and gcc. Note that this
-+ * instruction is actually very slow on some processors (e.g., family 5,
-+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
-+ * implementation instead.
-+ */
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+ uint msbit;
-+ __asm__("bsrl %1,%0"
-+ :"=r" (msbit)
-+ :"r" (x));
-+ return msbit;
-+}
++extern void dma_rxpiomode(dma32regs_t *);
++extern void dma_txpioloopback(dma32regs_t *);
+
-+#else
+
++#endif /* _hnddma_h_ */
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-12-16 23:39:10.708822000 +0100
+@@ -0,0 +1,16 @@
+/*
-+ * Generic Implementation
++ * Alternate include file for HND sbmips.h since CFE also ships with
++ * a sbmips.h.
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
+ */
+
-+#define DB_POW_MASK16 0xffff0000
-+#define DB_POW_MASK8 0x0000ff00
-+#define DB_POW_MASK4 0x000000f0
-+#define DB_POW_MASK2 0x0000000c
-+#define DB_POW_MASK1 0x00000002
-+
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+ uint32 temp_x = x;
-+ uint msbit = 0;
-+ if (temp_x & DB_POW_MASK16) {
-+ temp_x >>= 16;
-+ msbit = 16;
-+ }
-+ if (temp_x & DB_POW_MASK8) {
-+ temp_x >>= 8;
-+ msbit += 8;
-+ }
-+ if (temp_x & DB_POW_MASK4) {
-+ temp_x >>= 4;
-+ msbit += 4;
-+ }
-+ if (temp_x & DB_POW_MASK2) {
-+ temp_x >>= 2;
-+ msbit += 2;
-+ }
-+ if (temp_x & DB_POW_MASK1) {
-+ msbit += 1;
-+ }
-+ return(msbit);
-+}
-+
-+#endif
-+
-+#endif /* _BITFUNCS_H */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/cfe_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/cfe_osl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/cfe_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/cfe_osl.h 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,191 @@
++#include "sbmips.h"
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-12-16 23:39:10.708822000 +0100
+@@ -0,0 +1,371 @@
+/*
-+ * CFE boot loader OS Abstraction Layer.
++ * Linux OS Independent Layer
+ *
+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
-+#ifndef _cfe_osl_h_
-+#define _cfe_osl_h_
-+
-+#include <lib_types.h>
-+#include <lib_string.h>
-+#include <lib_printf.h>
-+#include <lib_malloc.h>
-+#include <cpu_config.h>
-+#include <cfe_timer.h>
-+#include <cfe_iocb.h>
-+#include <cfe_devfuncs.h>
-+#include <addrspace.h>
++#ifndef _linux_osl_h_
++#define _linux_osl_h_
+
+#include <typedefs.h>
+
-+/* dump string */
-+extern int (*xprinthook)(const char *str);
-+#define puts(str) do { if (xprinthook) xprinthook(str); } while (0)
++/* use current 2.4.x calling conventions */
++#include <linuxver.h>
+
+/* assert and panic */
++#ifdef __GNUC__
++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
++#if GCC_VERSION > 30100
+#define ASSERT(exp) do {} while (0)
++#else
++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/
++#define ASSERT(exp)
++#endif
++#endif
++
++/* microsecond delay */
++#define OSL_DELAY(usec) osl_delay(usec)
++extern void osl_delay(uint usec);
+
+/* PCMCIA attribute space access macros */
++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++struct pcmcia_dev {
++ dev_link_t link; /* PCMCIA device pointer */
++ dev_node_t node; /* PCMCIA node structure */
++ void *base; /* Mapped attribute memory window */
++ size_t size; /* Size of window */
++ void *drv; /* Driver data */
++};
++#endif
+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
-+ bzero(buf, size)
++ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
-+ do {} while (0)
++ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
++extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size);
++extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size);
+
+/* PCI configuration space access macros */
-+#define OSL_PCI_READ_CONFIG(loc, offset, size) \
-+ (offset == 8 ? 0 : 0xffffffff)
-+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
-+ do {} while (0)
++#define OSL_PCI_READ_CONFIG(osh, offset, size) \
++ osl_pci_read_config((osh), (offset), (size))
++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
++ osl_pci_write_config((osh), (offset), (size), (val))
++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset);
++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
+
+/* PCI device bus # and slot # */
-+#define OSL_PCI_BUS(osh) (0)
-+#define OSL_PCI_SLOT(osh) (0)
++#define OSL_PCI_BUS(osh) osl_pci_bus(osh)
++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh)
++extern uint osl_pci_bus(osl_t *osh);
++extern uint osl_pci_slot(osl_t *osh);
+
-+/* register access macros */
-+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v))
-+#define rreg32(r) (*(volatile uint32*)(r))
-+#ifdef IL_BIGENDIAN
-+#define wreg16(r, v) (*(volatile uint16*)((ulong)(r)^2) = (uint16)(v))
-+#define rreg16(r) (*(volatile uint16*)((ulong)(r)^2))
-+#define wreg8(r, v) (*(volatile uint8*)((ulong)(r)^3) = (uint8)(v))
-+#define rreg8(r) (*(volatile uint8*)((ulong)(r)^3))
-+#else
-+#define wreg16(r, v) (*(volatile uint16*)(r) = (uint16)(v))
-+#define rreg16(r) (*(volatile uint16*)(r))
-+#define wreg8(r, v) (*(volatile uint8*)(r) = (uint8)(v))
-+#define rreg8(r) (*(volatile uint8*)(r))
-+#endif
-+#define R_REG(r) ({ \
-+ __typeof(*(r)) __osl_v; \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): __osl_v = rreg8((r)); break; \
-+ case sizeof(uint16): __osl_v = rreg16((r)); break; \
-+ case sizeof(uint32): __osl_v = rreg32((r)); break; \
-+ } \
-+ __osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): wreg8((r), (v)); break; \
-+ case sizeof(uint16): wreg16((r), (v)); break; \
-+ case sizeof(uint32): wreg32((r), (v)); break; \
-+ } \
-+} while (0)
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
-+
-+/* bcopy, bcmp, and bzero */
-+#define bcmp(b1, b2, len) lib_memcmp((b1), (b2), (len))
++/* OSL initialization */
++extern osl_t *osl_attach(void *pdev);
++extern void osl_detach(osl_t *osh);
+
-+#define osl_attach(pdev) ((osl_t*)pdev)
-+#define osl_detach(osh)
++/* host/bus architecture-specific byte swap */
++#define BUS_SWAP32(v) (v)
+
+/* general purpose memory allocation */
-+#define MALLOC(osh, size) KMALLOC((size),0)
-+#define MFREE(osh, addr, size) KFREE((addr))
-+#define MALLOCED(osh) (0)
-+#define MALLOC_DUMP(osh, buf, sz)
-+#define MALLOC_FAILED(osh) (0)
+
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va) ((void*)UNCADDR((ulong)(va)))
++#if defined(BCMDBG_MEM)
+
-+/* host/bus architecture-specific address byte swap */
-+#define BUS_SWAP32(v) (v)
++#define MALLOC(osh, size) osl_debug_malloc((osh), (size), __LINE__, __FILE__)
++#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__)
++#define MALLOCED(osh) osl_malloced((osh))
++#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz))
++extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file);
++extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file);
++extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz);
+
-+/* get processor cycle count */
-+#define OSL_GETCYCLES(x) ((x) = 0)
++#else
+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) cfe_usleep((cfe_cpu_speed/CPUCFG_CYCLESPERCPUTICK/1000000*(usec)))
++#define MALLOC(osh, size) osl_malloc((osh), (size))
++#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size))
++#define MALLOCED(osh) osl_malloced((osh))
+
-+#define OSL_ERROR(bcmerror) osl_error(bcmerror)
++#endif /* BCMDBG_MEM */
+
-+/* map/unmap physical to virtual I/O */
-+#define REG_MAP(pa, size) ((void*)UNCADDR((ulong)(pa)))
-+#define REG_UNMAP(va) do {} while (0)
++#define MALLOC_FAILED(osh) osl_malloc_failed((osh))
+
-+/* dereference an address that may cause a bus exception */
-+#define BUSPROBE(val, addr) osl_busprobe(&(val), (uint32)(addr))
-+extern int osl_busprobe(uint32 *val, uint32 addr);
++extern void *osl_malloc(osl_t *osh, uint size);
++extern void osl_mfree(osl_t *osh, void *addr, uint size);
++extern uint osl_malloced(osl_t *osh);
++extern uint osl_malloc_failed(osl_t *osh);
+
-+/* allocate/free shared (dma-able) consistent (uncached) memory */
-+#define DMA_CONSISTENT_ALIGN 4096
++/* allocate/free shared (dma-able) consistent memory */
++#define DMA_CONSISTENT_ALIGN PAGE_SIZE
+#define DMA_ALLOC_CONSISTENT(osh, size, pap) \
-+ osl_dma_alloc_consistent((size), (pap))
++ osl_dma_alloc_consistent((osh), (size), (pap))
+#define DMA_FREE_CONSISTENT(osh, va, size, pa) \
-+ osl_dma_free_consistent((void*)(va))
-+extern void *osl_dma_alloc_consistent(uint size, ulong *pap);
-+extern void osl_dma_free_consistent(void *va);
++ osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
+
+/* map/unmap direction */
-+#define DMA_TX 1
-+#define DMA_RX 2
++#define DMA_TX 1
++#define DMA_RX 2
+
+/* map/unmap shared (dma-able) memory */
-+#define DMA_MAP(osh, va, size, direction, lb) ({ \
-+ cfe_flushcache(CFE_CACHE_FLUSH_D); \
-+ PHYSADDR((ulong)(va)); \
-+})
++#define DMA_MAP(osh, va, size, direction, p) \
++ osl_dma_map((osh), (va), (size), (direction))
+#define DMA_UNMAP(osh, pa, size, direction, p) \
-+ do {} while (0)
-+
-+/* shared (dma-able) memory access macros */
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) lib_memset((r), '\0', (len))
-+
-+/* generic packet structure */
-+#define LBUFSZ 4096
-+#define LBDATASZ (LBUFSZ - sizeof(struct lbuf))
-+struct lbuf {
-+ struct lbuf *next; /* pointer to next lbuf if in a chain */
-+ struct lbuf *link; /* pointer to next lbuf if in a list */
-+ uchar *head; /* start of buffer */
-+ uchar *end; /* end of buffer */
-+ uchar *data; /* start of data */
-+ uchar *tail; /* end of data */
-+ uint len; /* nbytes of data */
-+ void *cookie; /* generic cookie */
-+};
-+
-+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-+#define PKTBUFSZ 2048
++ osl_dma_unmap((osh), (pa), (size), (direction))
++extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction);
++extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction);
+
-+/* packet primitives */
-+#define PKTGET(osh, len, send) ((void*)osl_pktget((len)))
-+#define PKTFREE(osh, lb, send) osl_pktfree((struct lbuf*)(lb))
-+#define PKTDATA(osh, lb) (((struct lbuf*)(lb))->data)
-+#define PKTLEN(osh, lb) (((struct lbuf*)(lb))->len)
-+#define PKTHEADROOM(osh, lb) (PKTDATA(osh,lb)-(((struct lbuf*)(lb))->head))
-+#define PKTTAILROOM(osh, lb) ((((struct lbuf*)(lb))->end)-(((struct lbuf*)(lb))->tail))
-+#define PKTNEXT(osh, lb) (((struct lbuf*)(lb))->next)
-+#define PKTSETNEXT(lb, x) (((struct lbuf*)(lb))->next = (struct lbuf*)(x))
-+#define PKTSETLEN(osh, lb, len) osl_pktsetlen((struct lbuf*)(lb), (len))
-+#define PKTPUSH(osh, lb, bytes) osl_pktpush((struct lbuf*)(lb), (bytes))
-+#define PKTPULL(osh, lb, bytes) osl_pktpull((struct lbuf*)(lb), (bytes))
-+#define PKTDUP(osh, lb) osl_pktdup((struct lbuf*)(lb))
-+#define PKTCOOKIE(lb) (((struct lbuf*)(lb))->cookie)
-+#define PKTSETCOOKIE(lb, x) (((struct lbuf*)(lb))->cookie = (void*)(x))
-+#define PKTLINK(lb) (((struct lbuf*)(lb))->link)
-+#define PKTSETLINK(lb, x) (((struct lbuf*)(lb))->link = (struct lbuf*)(x))
-+#define PKTPRIO(lb) (0)
-+#define PKTSETPRIO(lb, x) do {} while (0)
-+extern struct lbuf *osl_pktget(uint len);
-+extern void osl_pktfree(struct lbuf *lb);
-+extern void osl_pktsetlen(struct lbuf *lb, uint len);
-+extern uchar *osl_pktpush(struct lbuf *lb, uint bytes);
-+extern uchar *osl_pktpull(struct lbuf *lb, uint bytes);
-+extern struct lbuf *osl_pktdup(struct lbuf *lb);
-+extern int osl_error(int bcmerror);
++/* register access macros */
++#if defined(BCMJTAG)
++#include <bcmjtag.h>
++#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r)))
++#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r)))
++#endif
+
-+#endif /* _cfe_osl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/epivers.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h
---- linux-2.4.32/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,69 @@
+/*
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ *
-+*/
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++ * Macros expand to calls to functions defined in linux_osl.c .
++ */
++#ifndef BINOSL
+
-+#ifndef _epivers_h_
-+#define _epivers_h_
++/* string library, kernel mode */
++#define printf(fmt, args...) printk(fmt, ## args)
++#include <linux/kernel.h>
++#include <linux/string.h>
+
-+#ifdef linux
-+#include <linux/config.h>
++/* register access macros */
++#if !defined(BCMJTAG)
++#ifndef IL_BIGENDIAN
++#define R_REG(r) ( \
++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
++ readl((volatile uint32*)(r)) \
++)
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#else /* IL_BIGENDIAN */
++#define R_REG(r) ({ \
++ __typeof(*(r)) __osl_v; \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
++ } \
++ __osl_v; \
++})
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
+#endif
-+
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define HPNA_VENDOR COMPANYNAME
-+#else
-+#define HPNA_VENDOR "Broadcom Corporation"
+#endif
+
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE __DATE__
-+
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE "Not Specified"
-+
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef HPNA_DEV_TYPE
-+
-+#if defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
+
-+#elif defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
++/* bcopy, bcmp, and bzero */
++#define bcopy(src, dst, len) memcpy((dst), (src), (len))
++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
++#define bzero(b, len) memset((b), '\0', (len))
+
++/* uncached virtual address */
++#ifdef mips
++#define OSL_UNCACHED(va) KSEG1ADDR((va))
++#include <asm/addrspace.h>
+#else
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
-+
++#define OSL_UNCACHED(va) (va)
+#endif
+
-+#endif /* !HPNA_DEV_TYPE */
-+
-+
-+#define EPI_MAJOR_VERSION 3
-+
-+#define EPI_MINOR_VERSION 130
-+
-+#define EPI_RC_NUMBER 20
-+
-+#define EPI_INCREMENTAL_NUMBER 0
-+
-+#define EPI_BUILD_NUMBER 0
-+
-+#define EPI_VERSION 3,130,20,0
-+
-+#define EPI_VERSION_NUM 0x03821400
-+
-+/* Driver Version String, ASCII, 32 chars max */
-+#define EPI_VERSION_STR "3.130.20.0"
-+#define EPI_ROUTER_VERSION_STR "3.131.20.0"
-+
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/epivers.h.in linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h.in
---- linux-2.4.32/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ *
-+*/
-+
-+#ifndef _epivers_h_
-+#define _epivers_h_
-+
-+#ifdef linux
-+#include <linux/config.h>
++/* get processor cycle count */
++#if defined(mips)
++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2)
++#elif defined(__i386__)
++#define OSL_GETCYCLES(x) rdtscl((x))
++#else
++#define OSL_GETCYCLES(x) ((x) = 0)
+#endif
+
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define HPNA_VENDOR COMPANYNAME
++/* dereference an address that may cause a bus exception */
++#ifdef mips
++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module")
+#else
-+#define HPNA_VENDOR "Broadcom Corporation"
++#define BUSPROBE(val, addr) get_dbe((val), (addr))
++#include <asm/paccess.h>
+#endif
-+
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE __DATE__
-+
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE "Not Specified"
-+
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef HPNA_DEV_TYPE
-+
-+#if defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
-+
-+#elif defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
-+
+#else
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
-+
++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; })
+#endif
+
-+#endif /* !HPNA_DEV_TYPE */
-+
-+
-+#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@
-+
-+#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@
-+
-+#define EPI_RC_NUMBER @EPI_RC_NUMBER@
++/* map/unmap physical to virtual I/O */
++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
++#define REG_UNMAP(va) iounmap((void *)(va))
+
-+#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@
++/* shared (dma-able) memory access macros */
++#define R_SM(r) *(r)
++#define W_SM(r, v) (*(r) = (v))
++#define BZERO_SM(r, len) memset((r), '\0', (len))
+
-+#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@
++/* packet primitives */
++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
++#define PKTFREE(osh, skb, send) osl_pktfree((skb))
++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data)
++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len)
++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head))
++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next)
++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum)
++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x))
++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
++#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority)
++#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x))
++extern void *osl_pktget(osl_t *osh, uint len, bool send);
++extern void osl_pktfree(void *skb);
+
-+#define EPI_VERSION @EPI_VERSION@
++#else /* BINOSL */
+
-+#define EPI_VERSION_NUM @EPI_VERSION_NUM@
++/* string library */
++#ifndef LINUX_OSL
++#undef printf
++#define printf(fmt, args...) osl_printf((fmt), ## args)
++#undef sprintf
++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args)
++#undef strcmp
++#define strcmp(s1, s2) osl_strcmp((s1), (s2))
++#undef strncmp
++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n))
++#undef strlen
++#define strlen(s) osl_strlen((s))
++#undef strcpy
++#define strcpy(d, s) osl_strcpy((d), (s))
++#undef strncpy
++#define strncpy(d, s, n) osl_strncpy((d), (s), (n))
++#endif
++extern int osl_printf(const char *format, ...);
++extern int osl_sprintf(char *buf, const char *format, ...);
++extern int osl_strcmp(const char *s1, const char *s2);
++extern int osl_strncmp(const char *s1, const char *s2, uint n);
++extern int osl_strlen(const char *s);
++extern char* osl_strcpy(char *d, const char *s);
++extern char* osl_strncpy(char *d, const char *s, uint n);
+
-+/* Driver Version String, ASCII, 32 chars max */
-+#define EPI_VERSION_STR "@EPI_VERSION_STR@"
-+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@"
++/* register access macros */
++#if !defined(BCMJTAG)
++#define R_REG(r) ( \
++ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \
++ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \
++ osl_readl((volatile uint32*)(r)) \
++)
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#endif
+
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/etsockio.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/etsockio.h
---- linux-2.4.32/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,59 @@
-+/*
-+ * Driver-specific socket ioctls
-+ * used by BSD, Linux, and PSOS
-+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
++extern uint8 osl_readb(volatile uint8 *r);
++extern uint16 osl_readw(volatile uint16 *r);
++extern uint32 osl_readl(volatile uint32 *r);
++extern void osl_writeb(uint8 v, volatile uint8 *r);
++extern void osl_writew(uint16 v, volatile uint16 *r);
++extern void osl_writel(uint32 v, volatile uint32 *r);
+
-+#ifndef _etsockio_h_
-+#define _etsockio_h_
++/* bcopy, bcmp, and bzero */
++extern void bcopy(const void *src, void *dst, int len);
++extern int bcmp(const void *b1, const void *b2, int len);
++extern void bzero(void *b, int len);
+
-+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
++/* uncached virtual address */
++#define OSL_UNCACHED(va) osl_uncached((va))
++extern void *osl_uncached(void *va);
+
++/* get processor cycle count */
++#define OSL_GETCYCLES(x) ((x) = osl_getcycles())
++extern uint osl_getcycles(void);
+
-+#if defined(linux)
-+#define SIOCSETCUP (SIOCDEVPRIVATE + 0)
-+#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1)
-+#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2)
-+#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3)
-+#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4)
-+#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5)
-+#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */
-+#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7)
-+#define SIOCTXGEN (SIOCDEVPRIVATE + 8)
-+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
-+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
-+#define SIOCSETCQOS (SIOCDEVPRIVATE + 11)
-+
-+#else /* !linux */
-+
-+#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq)
-+#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq)
-+#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq)
-+#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq)
-+#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq)
-+#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq)
-+#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */
-+#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq)
-+#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq)
++/* dereference an address that may target abort */
++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr))
++extern int osl_busprobe(uint32 *val, uint32 addr);
+
-+#endif
++/* map/unmap physical to virtual */
++#define REG_MAP(pa, size) osl_reg_map((pa), (size))
++#define REG_UNMAP(va) osl_reg_unmap((va))
++extern void *osl_reg_map(uint32 pa, uint size);
++extern void osl_reg_unmap(void *va);
+
-+/* arg to SIOCTXGEN */
-+struct txg {
-+ uint32 num; /* number of frames to send */
-+ uint32 delay; /* delay in microseconds between sending each */
-+ uint32 size; /* size of ether frame to send */
-+ uchar buf[1514]; /* starting ether frame data */
-+};
++/* shared (dma-able) memory access macros */
++#define R_SM(r) *(r)
++#define W_SM(r, v) (*(r) = (v))
++#define BZERO_SM(r, len) bzero((r), (len))
+
-+#endif
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/flash.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/flash.h
---- linux-2.4.32/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/flash.h 2005-12-16 23:39:10.704821750 +0100
-@@ -0,0 +1,188 @@
++/* packet primitives */
++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
++#define PKTFREE(osh, skb, send) osl_pktfree((skb))
++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb))
++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb))
++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb))
++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb))
++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb))
++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x))
++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len))
++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes))
++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes))
++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb))
++#define PKTCOOKIE(skb) osl_pktcookie((skb))
++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x))
++#define PKTLINK(skb) osl_pktlink((skb))
++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x))
++#define PKTPRIO(skb) osl_pktprio((skb))
++#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x))
++extern void *osl_pktget(osl_t *osh, uint len, bool send);
++extern void osl_pktfree(void *skb);
++extern uchar *osl_pktdata(osl_t *osh, void *skb);
++extern uint osl_pktlen(osl_t *osh, void *skb);
++extern uint osl_pktheadroom(osl_t *osh, void *skb);
++extern uint osl_pkttailroom(osl_t *osh, void *skb);
++extern void *osl_pktnext(osl_t *osh, void *skb);
++extern void osl_pktsetnext(void *skb, void *x);
++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len);
++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes);
++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes);
++extern void *osl_pktdup(osl_t *osh, void *skb);
++extern void *osl_pktcookie(void *skb);
++extern void osl_pktsetcookie(void *skb, void *x);
++extern void *osl_pktlink(void *skb);
++extern void osl_pktsetlink(void *skb, void *x);
++extern uint osl_pktprio(void *skb);
++extern void osl_pktsetprio(void *skb, uint x);
++
++#endif /* BINOSL */
++
++#define OSL_ERROR(bcmerror) osl_error(bcmerror)
++extern int osl_error(int bcmerror);
++
++/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
++#define PKTBUFSZ 2048
++
++#endif /* _linux_osl_h_ */
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-12-16 23:39:10.748824500 +0100
+@@ -0,0 +1,411 @@
+/*
-+ * flash.h: Common definitions for flash access.
++ * Linux-specific abstractions to gain some independence from linux kernel versions.
++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
++ *
+ * $Id$
+ */
+
-+/* Types of flashes we know about */
-+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t;
-+
-+/* Commands to write/erase the flases */
-+typedef struct _flash_cmds{
-+ flash_type_t type;
-+ bool need_unlock;
-+ uint16 pre_erase;
-+ uint16 erase_block;
-+ uint16 erase_chip;
-+ uint16 write_word;
-+ uint16 write_buf;
-+ uint16 clear_csr;
-+ uint16 read_csr;
-+ uint16 read_id;
-+ uint16 confirm;
-+ uint16 read_array;
-+} flash_cmds_t;
-+
-+#define UNLOCK_CMD_WORDS 2
-+
-+typedef struct _unlock_cmd {
-+ uint addr[UNLOCK_CMD_WORDS];
-+ uint16 cmd[UNLOCK_CMD_WORDS];
-+} unlock_cmd_t;
-+
-+/* Flash descriptors */
-+typedef struct _flash_desc {
-+ uint16 mfgid; /* Manufacturer Id */
-+ uint16 devid; /* Device Id */
-+ uint size; /* Total size in bytes */
-+ uint width; /* Device width in bytes */
-+ flash_type_t type; /* Device type old, S, J */
-+ uint bsize; /* Block size */
-+ uint nb; /* Number of blocks */
-+ uint ff; /* First full block */
-+ uint lf; /* Last full block */
-+ uint nsub; /* Number of subblocks */
-+ uint *subblocks; /* Offsets for subblocks */
-+ char *desc; /* Description */
-+} flash_desc_t;
-+
-+
-+#ifdef DECLARE_FLASHES
-+flash_cmds_t sflash_cmd_t =
-+ { SFLASH, 0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-+
-+flash_cmds_t flash_cmds[] = {
-+/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */
-+ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff },
-+ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff },
-+ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
-+ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
-+ { 0 }
-+};
++#ifndef _linuxver_h_
++#define _linuxver_h_
+
-+unlock_cmd_t unlock_cmd_amd = {
-+#ifdef MIPSEB
-+/* addr: */ { 0x0aa8, 0x0556},
-+#else
-+/* addr: */ { 0x0aaa, 0x0554},
-+#endif
-+/* data: */ { 0xaa, 0x55}
-+};
++#include <linux/config.h>
++#include <linux/version.h>
+
-+unlock_cmd_t unlock_cmd_sst = {
-+#ifdef MIPSEB
-+/* addr: */ { 0xaaa8, 0x5556},
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
++#ifdef __UNDEF_NO_VERSION__
++#undef __NO_VERSION__
+#else
-+/* addr: */ { 0xaaaa, 0x5554},
++#define __NO_VERSION__
++#endif
+#endif
-+/* data: */ { 0xaa, 0x55}
-+};
-+
-+#define AMD_CMD 0xaaa
-+#define SST_CMD 0xaaaa
+
-+/* intel unlock block cmds */
-+#define INTEL_UNLOCK1 0x60
-+#define INTEL_UNLOCK2 0xD0
++#if defined(MODULE) && defined(MODVERSIONS)
++#include <linux/modversions.h>
++#endif
+
-+/* Just eight blocks of 8KB byte each */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
++#include <linux/moduleparam.h>
++#endif
+
-+uint blk8x8k[] = { 0x00000000,
-+ 0x00002000,
-+ 0x00004000,
-+ 0x00006000,
-+ 0x00008000,
-+ 0x0000a000,
-+ 0x0000c000,
-+ 0x0000e000,
-+ 0x00010000
-+};
+
-+/* Funky AMD arrangement for 29xx800's */
-+uint amd800[] = { 0x00000000, /* 16KB */
-+ 0x00004000, /* 32KB */
-+ 0x0000c000, /* 8KB */
-+ 0x0000e000, /* 8KB */
-+ 0x00010000, /* 8KB */
-+ 0x00012000, /* 8KB */
-+ 0x00014000, /* 32KB */
-+ 0x0001c000, /* 16KB */
-+ 0x00020000
-+};
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
++#endif
+
-+/* AMD arrangement for 29xx160's */
-+uint amd4112[] = { 0x00000000, /* 32KB */
-+ 0x00008000, /* 8KB */
-+ 0x0000a000, /* 8KB */
-+ 0x0000c000, /* 16KB */
-+ 0x00010000
-+};
-+uint amd2114[] = { 0x00000000, /* 16KB */
-+ 0x00004000, /* 8KB */
-+ 0x00006000, /* 8KB */
-+ 0x00008000, /* 32KB */
-+ 0x00010000
-+};
++/* linux/malloc.h is deprecated, use linux/slab.h instead. */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
++#include <linux/malloc.h>
++#else
++#include <linux/slab.h>
++#endif
+
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <asm/io.h>
+
-+flash_desc_t sflash_desc =
-+ { 0, 0, 0, 0, SFLASH, 0, 0, 0, 0, 0, NULL, "SFLASH" };
-+
-+flash_desc_t flashes[] = {
-+ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" },
-+ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" },
-+ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
-+ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
-+ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
-+ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
-+ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
-+ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
-+ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
-+ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
-+ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
-+ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
-+ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
-+ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
-+ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" },
-+ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" },
-+ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" },
-+ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" },
-+ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" },
-+ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
-+ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" },
-+ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" },
-+ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
-+ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
-+ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
-+ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
-+ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
-+ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
-+ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" },
-+ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" },
-+ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
-+ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
-+ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" },
-+ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" },
-+ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" },
-+ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL },
-+};
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41))
++#include <linux/workqueue.h>
++#else
++#include <linux/tqueue.h>
++#ifndef work_struct
++#define work_struct tq_struct
++#endif
++#ifndef INIT_WORK
++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
++#endif
++#ifndef schedule_work
++#define schedule_work(_work) schedule_task((_work))
++#endif
++#ifndef flush_scheduled_work
++#define flush_scheduled_work() flush_scheduled_tasks()
++#endif
++#endif
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
++/* Some distributions have their own 2.6.x compatibility layers */
++#ifndef IRQ_NONE
++typedef void irqreturn_t;
++#define IRQ_NONE
++#define IRQ_HANDLED
++#define IRQ_RETVAL(x)
++#endif
+#else
++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
++#endif
+
-+extern flash_cmds_t flash_cmds[];
-+extern unlock_cmd_t unlock_cmd;
-+extern flash_desc_t flashes[];
++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+
-+#endif
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/flashutl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/flashutl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-12-16 23:39:10.708822000 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ * BCM47XX FLASH driver interface
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
++#include <pcmcia/version.h>
++#include <pcmcia/cs_types.h>
++#include <pcmcia/cs.h>
++#include <pcmcia/cistpl.h>
++#include <pcmcia/cisreg.h>
++#include <pcmcia/ds.h>
+
-+#ifndef _flashutl_h_
-+#define _flashutl_h_
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69))
++/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
++ * does this, but it's not in 2.4 so we do our own for now. */
++static inline void
++cs_error(client_handle_t handle, int func, int ret)
++{
++ error_info_t err = { func, ret };
++ CardServices(ReportError, handle, &err);
++}
++#endif
+
++#endif /* CONFIG_PCMCIA */
+
-+#ifndef _LANGUAGE_ASSEMBLY
++#ifndef __exit
++#define __exit
++#endif
++#ifndef __devexit
++#define __devexit
++#endif
++#ifndef __devinit
++#define __devinit __init
++#endif
++#ifndef __devinitdata
++#define __devinitdata
++#endif
++#ifndef __devexit_p
++#define __devexit_p(x) x
++#endif
+
-+int sysFlashInit(char *flash_str);
-+int sysFlashRead(uint off, uchar *dst, uint bytes);
-+int sysFlashWrite(uint off, uchar *src, uint bytes);
-+void nvWrite(unsigned short *data, unsigned int len);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
+
-+#endif /* _LANGUAGE_ASSEMBLY */
++#define pci_get_drvdata(dev) (dev)->sysdata
++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value)
+
-+#endif /* _flashutl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h
---- linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-12-16 23:39:10.708822000 +0100
-@@ -0,0 +1,71 @@
+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
+ */
+
-+#ifndef _hnddma_h_
-+#define _hnddma_h_
-+
-+/* export structure */
-+typedef volatile struct {
-+ /* rx error counters */
-+ uint rxgiants; /* rx giant frames */
-+ uint rxnobuf; /* rx out of dma descriptors */
-+ /* tx error counters */
-+ uint txnobuf; /* tx out of dma descriptors */
-+} hnddma_t;
++struct pci_device_id {
++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
++ unsigned long driver_data; /* Data private to the driver */
++};
+
-+#ifndef di_t
-+#define di_t void
++struct pci_driver {
++ struct list_head node;
++ char *name;
++ const struct pci_device_id *id_table; /* NULL if wants all devices */
++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
++ void (*suspend)(struct pci_dev *dev); /* Device suspended */
++ void (*resume)(struct pci_dev *dev); /* Device woken up */
++};
++
++#define MODULE_DEVICE_TABLE(type, name)
++#define PCI_ANY_ID (~0)
++
++/* compatpci.c */
++#define pci_module_init pci_register_driver
++extern int pci_register_driver(struct pci_driver *drv);
++extern void pci_unregister_driver(struct pci_driver *drv);
++
++#endif /* PCI registration */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
++#ifdef MODULE
++#define module_init(x) int init_module(void) { return x(); }
++#define module_exit(x) void cleanup_module(void) { x(); }
++#else
++#define module_init(x) __initcall(x);
++#define module_exit(x) __exitcall(x);
++#endif
+#endif
+
-+#ifndef osl_t
-+#define osl_t void
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
++#define list_for_each(pos, head) \
++ for (pos = (head)->next; pos != (head); pos = pos->next)
+#endif
+
-+/* externs */
-+extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx,
-+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level);
-+extern void dma_detach(di_t *di);
-+extern void dma_txreset(di_t *di);
-+extern void dma_rxreset(di_t *di);
-+extern void dma_txinit(di_t *di);
-+extern bool dma_txenabled(di_t *di);
-+extern void dma_rxinit(di_t *di);
-+extern void dma_rxenable(di_t *di);
-+extern bool dma_rxenabled(di_t *di);
-+extern void dma_txsuspend(di_t *di);
-+extern void dma_txresume(di_t *di);
-+extern bool dma_txsuspended(di_t *di);
-+extern bool dma_txsuspendedidle(di_t *di);
-+extern bool dma_txstopped(di_t *di);
-+extern bool dma_rxstopped(di_t *di);
-+extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
-+extern void dma_fifoloopbackenable(di_t *di);
-+extern void *dma_rx(di_t *di);
-+extern void dma_rxfill(di_t *di);
-+extern void dma_txreclaim(di_t *di, bool forceall);
-+extern void dma_rxreclaim(di_t *di);
-+extern uintptr dma_getvar(di_t *di, char *name);
-+extern void *dma_getnexttxp(di_t *di, bool forceall);
-+extern void *dma_peeknexttxp(di_t *di);
-+extern void *dma_getnextrxp(di_t *di, bool forceall);
-+extern void dma_txblock(di_t *di);
-+extern void dma_txunblock(di_t *di);
-+extern uint dma_txactive(di_t *di);
-+extern void dma_txrotate(di_t *di);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
++#endif
+
-+extern void dma_rxpiomode(dma32regs_t *);
-+extern void dma_txpioloopback(dma32regs_t *);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
++#define pci_enable_device(dev) do { } while (0)
++#endif
+
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
++#define net_device device
++#endif
+
-+#endif /* _hnddma_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h
---- linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-12-16 23:39:10.708822000 +0100
-@@ -0,0 +1,16 @@
-+/*
-+ * Alternate include file for HND sbmips.h since CFE also ships with
-+ * a sbmips.h.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
+
-+#include "sbmips.h"
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-12-16 23:39:10.708822000 +0100
-@@ -0,0 +1,371 @@
+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * DMA mapping
+ *
-+ * $Id$
++ * See linux/Documentation/DMA-mapping.txt
+ */
+
-+#ifndef _linux_osl_h_
-+#define _linux_osl_h_
++#ifndef PCI_DMA_TODEVICE
++#define PCI_DMA_TODEVICE 1
++#define PCI_DMA_FROMDEVICE 2
++#endif
+
-+#include <typedefs.h>
++typedef u32 dma_addr_t;
+
-+/* use current 2.4.x calling conventions */
-+#include <linuxver.h>
++/* Pure 2^n version of get_order */
++static inline int get_order(unsigned long size)
++{
++ int order;
+
-+/* assert and panic */
-+#ifdef __GNUC__
-+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
-+#if GCC_VERSION > 30100
-+#define ASSERT(exp) do {} while (0)
-+#else
-+/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/
-+#define ASSERT(exp)
-+#endif
-+#endif
++ size = (size-1) >> (PAGE_SHIFT-1);
++ order = -1;
++ do {
++ size >>= 1;
++ order++;
++ } while (size);
++ return order;
++}
+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) osl_delay(usec)
-+extern void osl_delay(uint usec);
++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
++ dma_addr_t *dma_handle)
++{
++ void *ret;
++ int gfp = GFP_ATOMIC | GFP_DMA;
+
-+/* PCMCIA attribute space access macros */
-+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
-+struct pcmcia_dev {
-+ dev_link_t link; /* PCMCIA device pointer */
-+ dev_node_t node; /* PCMCIA node structure */
-+ void *base; /* Mapped attribute memory window */
-+ size_t size; /* Size of window */
-+ void *drv; /* Driver data */
-+};
-+#endif
-+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
-+ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
-+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
-+ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
-+extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size);
-+extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size);
++ ret = (void *)__get_free_pages(gfp, get_order(size));
+
-+/* PCI configuration space access macros */
-+#define OSL_PCI_READ_CONFIG(osh, offset, size) \
-+ osl_pci_read_config((osh), (offset), (size))
-+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
-+ osl_pci_write_config((osh), (offset), (size), (val))
-+extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset);
-+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
++ if (ret != NULL) {
++ memset(ret, 0, size);
++ *dma_handle = virt_to_bus(ret);
++ }
++ return ret;
++}
++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
++ void *vaddr, dma_addr_t dma_handle)
++{
++ free_pages((unsigned long)vaddr, get_order(size));
++}
++#ifdef ILSIM
++extern uint pci_map_single(void *dev, void *va, uint size, int direction);
++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
++#else
++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
++#define pci_unmap_single(cookie, address, size, dir)
++#endif
+
-+/* PCI device bus # and slot # */
-+#define OSL_PCI_BUS(osh) osl_pci_bus(osh)
-+#define OSL_PCI_SLOT(osh) osl_pci_slot(osh)
-+extern uint osl_pci_bus(osl_t *osh);
-+extern uint osl_pci_slot(osl_t *osh);
++#endif /* DMA mapping */
+
-+/* OSL initialization */
-+extern osl_t *osl_attach(void *pdev);
-+extern void osl_detach(osl_t *osh);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
+
-+/* host/bus architecture-specific byte swap */
-+#define BUS_SWAP32(v) (v)
++#define dev_kfree_skb_any(a) dev_kfree_skb(a)
++#define netif_down(dev) do { (dev)->start = 0; } while(0)
+
-+/* general purpose memory allocation */
++/* pcmcia-cs provides its own netdevice compatibility layer */
++#ifndef _COMPAT_NETDEVICE_H
+
-+#if defined(BCMDBG_MEM)
++/*
++ * SoftNet
++ *
++ * For pre-softnet kernels we need to tell the upper layer not to
++ * re-enter start_xmit() while we are in there. However softnet
++ * guarantees not to enter while we are in there so there is no need
++ * to do the netif_stop_queue() dance unless the transmit queue really
++ * gets stuck. This should also improve performance according to tests
++ * done by Aman Singla.
++ */
+
-+#define MALLOC(osh, size) osl_debug_malloc((osh), (size), __LINE__, __FILE__)
-+#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__)
-+#define MALLOCED(osh) osl_malloced((osh))
-+#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz))
-+extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file);
-+extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file);
-+extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz);
++#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
+
-+#else
++static inline void netif_start_queue(struct net_device *dev)
++{
++ dev->tbusy = 0;
++ dev->interrupt = 0;
++ dev->start = 1;
++}
+
-+#define MALLOC(osh, size) osl_malloc((osh), (size))
-+#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size))
-+#define MALLOCED(osh) osl_malloced((osh))
++#define netif_queue_stopped(dev) (dev)->tbusy
++#define netif_running(dev) (dev)->start
+
-+#endif /* BCMDBG_MEM */
++#endif /* _COMPAT_NETDEVICE_H */
+
-+#define MALLOC_FAILED(osh) osl_malloc_failed((osh))
++#define netif_device_attach(dev) netif_start_queue(dev)
++#define netif_device_detach(dev) netif_stop_queue(dev)
+
-+extern void *osl_malloc(osl_t *osh, uint size);
-+extern void osl_mfree(osl_t *osh, void *addr, uint size);
-+extern uint osl_malloced(osl_t *osh);
-+extern uint osl_malloc_failed(osl_t *osh);
++/* 2.4.x renamed bottom halves to tasklets */
++#define tasklet_struct tq_struct
++static inline void tasklet_schedule(struct tasklet_struct *tasklet)
++{
++ queue_task(tasklet, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++}
+
-+/* allocate/free shared (dma-able) consistent memory */
-+#define DMA_CONSISTENT_ALIGN PAGE_SIZE
-+#define DMA_ALLOC_CONSISTENT(osh, size, pap) \
-+ osl_dma_alloc_consistent((osh), (size), (pap))
-+#define DMA_FREE_CONSISTENT(osh, va, size, pa) \
-+ osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
-+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
-+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
++static inline void tasklet_init(struct tasklet_struct *tasklet,
++ void (*func)(unsigned long),
++ unsigned long data)
++{
++ tasklet->next = NULL;
++ tasklet->sync = 0;
++ tasklet->routine = (void (*)(void *))func;
++ tasklet->data = (void *)data;
++}
++#define tasklet_kill(tasklet) {do{} while(0);}
+
-+/* map/unmap direction */
-+#define DMA_TX 1
-+#define DMA_RX 2
++/* 2.4.x introduced del_timer_sync() */
++#define del_timer_sync(timer) del_timer(timer)
+
-+/* map/unmap shared (dma-able) memory */
-+#define DMA_MAP(osh, va, size, direction, p) \
-+ osl_dma_map((osh), (va), (size), (direction))
-+#define DMA_UNMAP(osh, pa, size, direction, p) \
-+ osl_dma_unmap((osh), (pa), (size), (direction))
-+extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction);
-+extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction);
++#else
+
-+/* register access macros */
-+#if defined(BCMJTAG)
-+#include <bcmjtag.h>
-+#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r)))
-+#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r)))
-+#endif
++#define netif_down(dev)
++
++#endif /* SoftNet */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
+
+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ * Macros expand to calls to functions defined in linux_osl.c .
++ * Emit code to initialise a tq_struct's routine and data pointers
+ */
-+#ifndef BINOSL
++#define PREPARE_TQUEUE(_tq, _routine, _data) \
++ do { \
++ (_tq)->routine = _routine; \
++ (_tq)->data = _data; \
++ } while (0)
+
-+/* string library, kernel mode */
-+#define printf(fmt, args...) printk(fmt, ## args)
-+#include <linux/kernel.h>
-+#include <linux/string.h>
++/*
++ * Emit code to initialise all of a tq_struct
++ */
++#define INIT_TQUEUE(_tq, _routine, _data) \
++ do { \
++ INIT_LIST_HEAD(&(_tq)->list); \
++ (_tq)->sync = 0; \
++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
++ } while (0)
+
-+/* register access macros */
-+#if !defined(BCMJTAG)
-+#ifndef IL_BIGENDIAN
-+#define R_REG(r) ( \
-+ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
-+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
-+ readl((volatile uint32*)(r)) \
-+)
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
-+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
-+ } \
-+} while (0)
-+#else /* IL_BIGENDIAN */
-+#define R_REG(r) ({ \
-+ __typeof(*(r)) __osl_v; \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
-+ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
-+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
-+ } \
-+ __osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
-+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
-+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
-+ } \
-+} while (0)
-+#endif
+#endif
+
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
+
-+/* bcopy, bcmp, and bzero */
-+#define bcopy(src, dst, len) memcpy((dst), (src), (len))
-+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
-+#define bzero(b, len) memset((b), '\0', (len))
++/* Power management related routines */
+
-+/* uncached virtual address */
-+#ifdef mips
-+#define OSL_UNCACHED(va) KSEG1ADDR((va))
-+#include <asm/addrspace.h>
-+#else
-+#define OSL_UNCACHED(va) (va)
++static inline int
++pci_save_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_read_config_dword(dev, i * 4,&buffer[i]);
++ }
++ return 0;
++}
++
++static inline int
++pci_restore_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
++
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_write_config_dword(dev,i * 4, buffer[i]);
++ }
++ /*
++ * otherwise, write the context information we know from bootup.
++ * This works around a problem where warm-booting from Windows
++ * combined with a D3(hot)->D0 transition causes PCI config
++ * header data to be forgotten.
++ */
++ else {
++ for (i = 0; i < 6; i ++)
++ pci_write_config_dword(dev,
++ PCI_BASE_ADDRESS_0 + (i * 4),
++ pci_resource_start(dev, i));
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ }
++ return 0;
++}
++
++#endif /* PCI power management */
++
++/* Old cp0 access macros deprecated in 2.4.19 */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
+#endif
+
-+/* get processor cycle count */
-+#if defined(mips)
-+#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2)
-+#elif defined(__i386__)
-+#define OSL_GETCYCLES(x) rdtscl((x))
++/* Module refcount handled internally in 2.6.x */
++#ifndef SET_MODULE_OWNER
++#define SET_MODULE_OWNER(dev) do {} while (0)
++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
+#else
-+#define OSL_GETCYCLES(x) ((x) = 0)
++#define OLD_MOD_INC_USE_COUNT do {} while (0)
++#define OLD_MOD_DEC_USE_COUNT do {} while (0)
+#endif
+
-+/* dereference an address that may cause a bus exception */
-+#ifdef mips
-+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
-+#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module")
-+#else
-+#define BUSPROBE(val, addr) get_dbe((val), (addr))
-+#include <asm/paccess.h>
++#ifndef SET_NETDEV_DEV
++#define SET_NETDEV_DEV(net, pdev) do {} while (0)
+#endif
-+#else
-+#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; })
++
++#ifndef HAVE_FREE_NETDEV
++#define free_netdev(dev) kfree(dev)
+#endif
+
-+/* map/unmap physical to virtual I/O */
-+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-+#define REG_UNMAP(va) iounmap((void *)(va))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
++/* struct packet_type redefined in 2.6.x */
++#define af_packet_priv data
++#endif
+
-+/* shared (dma-able) memory access macros */
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) memset((r), '\0', (len))
++#endif /* _linuxver_h_ */
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-12-16 23:39:10.748824500 +0100
+@@ -0,0 +1,552 @@
++/*
++ * HND Run Time Environment for standalone MIPS programs.
++ *
++ * Copyright 2005, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
+
-+/* packet primitives */
-+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
-+#define PKTFREE(osh, skb, send) osl_pktfree((skb))
-+#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data)
-+#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next)
-+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
-+#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
-+#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
-+#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
-+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum)
-+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x))
-+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
-+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
-+#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority)
-+#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x))
-+extern void *osl_pktget(osl_t *osh, uint len, bool send);
-+extern void osl_pktfree(void *skb);
++#ifndef _MISPINC_H
++#define _MISPINC_H
+
-+#else /* BINOSL */
+
-+/* string library */
-+#ifndef LINUX_OSL
-+#undef printf
-+#define printf(fmt, args...) osl_printf((fmt), ## args)
-+#undef sprintf
-+#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args)
-+#undef strcmp
-+#define strcmp(s1, s2) osl_strcmp((s1), (s2))
-+#undef strncmp
-+#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n))
-+#undef strlen
-+#define strlen(s) osl_strlen((s))
-+#undef strcpy
-+#define strcpy(d, s) osl_strcpy((d), (s))
-+#undef strncpy
-+#define strncpy(d, s, n) osl_strncpy((d), (s), (n))
-+#endif
-+extern int osl_printf(const char *format, ...);
-+extern int osl_sprintf(char *buf, const char *format, ...);
-+extern int osl_strcmp(const char *s1, const char *s2);
-+extern int osl_strncmp(const char *s1, const char *s2, uint n);
-+extern int osl_strlen(const char *s);
-+extern char* osl_strcpy(char *d, const char *s);
-+extern char* osl_strncpy(char *d, const char *s, uint n);
-+
-+/* register access macros */
-+#if !defined(BCMJTAG)
-+#define R_REG(r) ( \
-+ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \
-+ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \
-+ osl_readl((volatile uint32*)(r)) \
-+)
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
-+ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
-+ } \
-+} while (0)
-+#endif
-+
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
-+extern uint8 osl_readb(volatile uint8 *r);
-+extern uint16 osl_readw(volatile uint16 *r);
-+extern uint32 osl_readl(volatile uint32 *r);
-+extern void osl_writeb(uint8 v, volatile uint8 *r);
-+extern void osl_writew(uint16 v, volatile uint16 *r);
-+extern void osl_writel(uint32 v, volatile uint32 *r);
-+
-+/* bcopy, bcmp, and bzero */
-+extern void bcopy(const void *src, void *dst, int len);
-+extern int bcmp(const void *b1, const void *b2, int len);
-+extern void bzero(void *b, int len);
-+
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va) osl_uncached((va))
-+extern void *osl_uncached(void *va);
-+
-+/* get processor cycle count */
-+#define OSL_GETCYCLES(x) ((x) = osl_getcycles())
-+extern uint osl_getcycles(void);
-+
-+/* dereference an address that may target abort */
-+#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr))
-+extern int osl_busprobe(uint32 *val, uint32 addr);
-+
-+/* map/unmap physical to virtual */
-+#define REG_MAP(pa, size) osl_reg_map((pa), (size))
-+#define REG_UNMAP(va) osl_reg_unmap((va))
-+extern void *osl_reg_map(uint32 pa, uint size);
-+extern void osl_reg_unmap(void *va);
++/* MIPS defines */
+
-+/* shared (dma-able) memory access macros */
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) bzero((r), (len))
++#ifdef _LANGUAGE_ASSEMBLY
+
-+/* packet primitives */
-+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send))
-+#define PKTFREE(osh, skb, send) osl_pktfree((skb))
-+#define PKTDATA(osh, skb) osl_pktdata((osh), (skb))
-+#define PKTLEN(osh, skb) osl_pktlen((osh), (skb))
-+#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb))
-+#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb))
-+#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb))
-+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x))
-+#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len))
-+#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes))
-+#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes))
-+#define PKTDUP(osh, skb) osl_pktdup((osh), (skb))
-+#define PKTCOOKIE(skb) osl_pktcookie((skb))
-+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x))
-+#define PKTLINK(skb) osl_pktlink((skb))
-+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x))
-+#define PKTPRIO(skb) osl_pktprio((skb))
-+#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x))
-+extern void *osl_pktget(osl_t *osh, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+extern uchar *osl_pktdata(osl_t *osh, void *skb);
-+extern uint osl_pktlen(osl_t *osh, void *skb);
-+extern uint osl_pktheadroom(osl_t *osh, void *skb);
-+extern uint osl_pkttailroom(osl_t *osh, void *skb);
-+extern void *osl_pktnext(osl_t *osh, void *skb);
-+extern void osl_pktsetnext(void *skb, void *x);
-+extern void osl_pktsetlen(osl_t *osh, void *skb, uint len);
-+extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes);
-+extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes);
-+extern void *osl_pktdup(osl_t *osh, void *skb);
-+extern void *osl_pktcookie(void *skb);
-+extern void osl_pktsetcookie(void *skb, void *x);
-+extern void *osl_pktlink(void *skb);
-+extern void osl_pktsetlink(void *skb, void *x);
-+extern uint osl_pktprio(void *skb);
-+extern void osl_pktsetprio(void *skb, uint x);
++/*
++ * Symbolic register names for 32 bit ABI
++ */
++#define zero $0 /* wired zero */
++#define AT $1 /* assembler temp - uppercase because of ".set at" */
++#define v0 $2 /* return value */
++#define v1 $3
++#define a0 $4 /* argument registers */
++#define a1 $5
++#define a2 $6
++#define a3 $7
++#define t0 $8 /* caller saved */
++#define t1 $9
++#define t2 $10
++#define t3 $11
++#define t4 $12
++#define t5 $13
++#define t6 $14
++#define t7 $15
++#define s0 $16 /* callee saved */
++#define s1 $17
++#define s2 $18
++#define s3 $19
++#define s4 $20
++#define s5 $21
++#define s6 $22
++#define s7 $23
++#define t8 $24 /* caller saved */
++#define t9 $25
++#define jp $25 /* PIC jump register */
++#define k0 $26 /* kernel scratch */
++#define k1 $27
++#define gp $28 /* global pointer */
++#define sp $29 /* stack pointer */
++#define fp $30 /* frame pointer */
++#define s8 $30 /* same like fp! */
++#define ra $31 /* return address */
+
-+#endif /* BINOSL */
+
-+#define OSL_ERROR(bcmerror) osl_error(bcmerror)
-+extern int osl_error(int bcmerror);
++/*
++ * CP0 Registers
++ */
+
-+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-+#define PKTBUFSZ 2048
++#define C0_INX $0
++#define C0_RAND $1
++#define C0_TLBLO0 $2
++#define C0_TLBLO C0_TLBLO0
++#define C0_TLBLO1 $3
++#define C0_CTEXT $4
++#define C0_PGMASK $5
++#define C0_WIRED $6
++#define C0_BADVADDR $8
++#define C0_COUNT $9
++#define C0_TLBHI $10
++#define C0_COMPARE $11
++#define C0_SR $12
++#define C0_STATUS C0_SR
++#define C0_CAUSE $13
++#define C0_EPC $14
++#define C0_PRID $15
++#define C0_CONFIG $16
++#define C0_LLADDR $17
++#define C0_WATCHLO $18
++#define C0_WATCHHI $19
++#define C0_XCTEXT $20
++#define C0_DIAGNOSTIC $22
++#define C0_BROADCOM C0_DIAGNOSTIC
++#define C0_PERFORMANCE $25
++#define C0_ECC $26
++#define C0_CACHEERR $27
++#define C0_TAGLO $28
++#define C0_TAGHI $29
++#define C0_ERREPC $30
++#define C0_DESAVE $31
+
-+#endif /* _linux_osl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h
---- linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-12-16 23:39:10.748824500 +0100
-@@ -0,0 +1,411 @@
+/*
-+ * Linux-specific abstractions to gain some independence from linux kernel versions.
-+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
++ * LEAF - declare leaf routine
+ */
++#define LEAF(symbol) \
++ .globl symbol; \
++ .align 2; \
++ .type symbol,@function; \
++ .ent symbol,0; \
++symbol: .frame sp,0,ra
+
-+#ifndef _linuxver_h_
-+#define _linuxver_h_
++/*
++ * END - mark end of function
++ */
++#define END(function) \
++ .end function; \
++ .size function,.-function
+
-+#include <linux/config.h>
-+#include <linux/version.h>
++#define _ULCAST_
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
-+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-+#ifdef __UNDEF_NO_VERSION__
-+#undef __NO_VERSION__
+#else
-+#define __NO_VERSION__
-+#endif
-+#endif
+
-+#if defined(MODULE) && defined(MODVERSIONS)
-+#include <linux/modversions.h>
++/*
++ * The following macros are especially useful for __asm__
++ * inline assembler.
++ */
++#ifndef __STR
++#define __STR(x) #x
+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-+#include <linux/moduleparam.h>
++#ifndef STR
++#define STR(x) __STR(x)
+#endif
+
++#define _ULCAST_ (unsigned long)
+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-+#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
-+#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
-+#endif
-+
-+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
-+#include <linux/malloc.h>
-+#else
-+#include <linux/slab.h>
-+#endif
+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <asm/io.h>
++/*
++ * CP0 Registers
++ */
+
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41))
-+#include <linux/workqueue.h>
-+#else
-+#include <linux/tqueue.h>
-+#ifndef work_struct
-+#define work_struct tq_struct
-+#endif
-+#ifndef INIT_WORK
-+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
-+#endif
-+#ifndef schedule_work
-+#define schedule_work(_work) schedule_task((_work))
-+#endif
-+#ifndef flush_scheduled_work
-+#define flush_scheduled_work() flush_scheduled_tasks()
-+#endif
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-+/* Some distributions have their own 2.6.x compatibility layers */
-+#ifndef IRQ_NONE
-+typedef void irqreturn_t;
-+#define IRQ_NONE
-+#define IRQ_HANDLED
-+#define IRQ_RETVAL(x)
-+#endif
-+#else
-+typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
-+#endif
-+
-+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
-+
-+#include <pcmcia/version.h>
-+#include <pcmcia/cs_types.h>
-+#include <pcmcia/cs.h>
-+#include <pcmcia/cistpl.h>
-+#include <pcmcia/cisreg.h>
-+#include <pcmcia/ds.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69))
-+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
-+ * does this, but it's not in 2.4 so we do our own for now. */
-+static inline void
-+cs_error(client_handle_t handle, int func, int ret)
-+{
-+ error_info_t err = { func, ret };
-+ CardServices(ReportError, handle, &err);
-+}
-+#endif
-+
-+#endif /* CONFIG_PCMCIA */
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+#ifndef __devexit
-+#define __devexit
-+#endif
-+#ifndef __devinit
-+#define __devinit __init
-+#endif
-+#ifndef __devinitdata
-+#define __devinitdata
-+#endif
-+#ifndef __devexit_p
-+#define __devexit_p(x) x
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
++#define C0_INX 0 /* CP0: TLB Index */
++#define C0_RAND 1 /* CP0: TLB Random */
++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
++#define C0_CTEXT 4 /* CP0: Context */
++#define C0_PGMASK 5 /* CP0: TLB PageMask */
++#define C0_WIRED 6 /* CP0: TLB Wired */
++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
++#define C0_COUNT 9 /* CP0: Count */
++#define C0_TLBHI 10 /* CP0: TLB EntryHi */
++#define C0_COMPARE 11 /* CP0: Compare */
++#define C0_SR 12 /* CP0: Processor Status */
++#define C0_STATUS C0_SR /* CP0: Processor Status */
++#define C0_CAUSE 13 /* CP0: Exception Cause */
++#define C0_EPC 14 /* CP0: Exception PC */
++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
++#define C0_CONFIG 16 /* CP0: Config */
++#define C0_LLADDR 17 /* CP0: LLAddr */
++#define C0_WATCHLO 18 /* CP0: WatchpointLo */
++#define C0_WATCHHI 19 /* CP0: WatchpointHi */
++#define C0_XCTEXT 20 /* CP0: XContext */
++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
++#define C0_ECC 26 /* CP0: ECC */
++#define C0_CACHEERR 27 /* CP0: CacheErr */
++#define C0_TAGLO 28 /* CP0: TagLo */
++#define C0_TAGHI 29 /* CP0: TagHi */
++#define C0_ERREPC 30 /* CP0: ErrorEPC */
++#define C0_DESAVE 31 /* CP0: DebugSave */
+
-+#define pci_get_drvdata(dev) (dev)->sysdata
-+#define pci_set_drvdata(dev, value) (dev)->sysdata=(value)
++#endif /* _LANGUAGE_ASSEMBLY */
+
+/*
-+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
++ * Memory segments (32bit kernel mode addresses)
+ */
++#undef KUSEG
++#undef KSEG0
++#undef KSEG1
++#undef KSEG2
++#undef KSEG3
++#define KUSEG 0x00000000
++#define KSEG0 0x80000000
++#define KSEG1 0xa0000000
++#define KSEG2 0xc0000000
++#define KSEG3 0xe0000000
++#define PHYSADDR_MASK 0x1fffffff
+
-+struct pci_device_id {
-+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
-+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
-+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
-+ unsigned long driver_data; /* Data private to the driver */
-+};
-+
-+struct pci_driver {
-+ struct list_head node;
-+ char *name;
-+ const struct pci_device_id *id_table; /* NULL if wants all devices */
-+ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
-+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
-+ void (*suspend)(struct pci_dev *dev); /* Device suspended */
-+ void (*resume)(struct pci_dev *dev); /* Device woken up */
-+};
-+
-+#define MODULE_DEVICE_TABLE(type, name)
-+#define PCI_ANY_ID (~0)
-+
-+/* compatpci.c */
-+#define pci_module_init pci_register_driver
-+extern int pci_register_driver(struct pci_driver *drv);
-+extern void pci_unregister_driver(struct pci_driver *drv);
++/*
++ * Map an address to a certain kernel segment
++ */
++#undef PHYSADDR
++#undef KSEG0ADDR
++#undef KSEG1ADDR
++#undef KSEG2ADDR
++#undef KSEG3ADDR
+
-+#endif /* PCI registration */
++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK)
++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
-+#ifdef MODULE
-+#define module_init(x) int init_module(void) { return x(); }
-+#define module_exit(x) void cleanup_module(void) { x(); }
-+#else
-+#define module_init(x) __initcall(x);
-+#define module_exit(x) __exitcall(x);
-+#endif
-+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
-+#define list_for_each(pos, head) \
-+ for (pos = (head)->next; pos != (head); pos = pos->next)
++#ifndef Index_Invalidate_I
++/*
++ * Cache Operations
++ */
++#define Index_Invalidate_I 0x00
++#define Index_Writeback_Inv_D 0x01
++#define Index_Invalidate_SI 0x02
++#define Index_Writeback_Inv_SD 0x03
++#define Index_Load_Tag_I 0x04
++#define Index_Load_Tag_D 0x05
++#define Index_Load_Tag_SI 0x06
++#define Index_Load_Tag_SD 0x07
++#define Index_Store_Tag_I 0x08
++#define Index_Store_Tag_D 0x09
++#define Index_Store_Tag_SI 0x0A
++#define Index_Store_Tag_SD 0x0B
++#define Create_Dirty_Excl_D 0x0d
++#define Create_Dirty_Excl_SD 0x0f
++#define Hit_Invalidate_I 0x10
++#define Hit_Invalidate_D 0x11
++#define Hit_Invalidate_SI 0x12
++#define Hit_Invalidate_SD 0x13
++#define Fill_I 0x14
++#define Hit_Writeback_Inv_D 0x15
++ /* 0x16 is unused */
++#define Hit_Writeback_Inv_SD 0x17
++#define R5K_Page_Invalidate_S 0x17
++#define Hit_Writeback_I 0x18
++#define Hit_Writeback_D 0x19
++ /* 0x1a is unused */
++#define Hit_Writeback_SD 0x1b
++ /* 0x1c is unused */
++ /* 0x1e is unused */
++#define Hit_Set_Virtual_SI 0x1e
++#define Hit_Set_Virtual_SD 0x1f
+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
-+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
-+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
-+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
-+#define pci_enable_device(dev) do { } while (0)
-+#endif
++/*
++ * R4x00 interrupt enable / cause bits
++ */
++#define IE_SW0 (_ULCAST_(1) << 8)
++#define IE_SW1 (_ULCAST_(1) << 9)
++#define IE_IRQ0 (_ULCAST_(1) << 10)
++#define IE_IRQ1 (_ULCAST_(1) << 11)
++#define IE_IRQ2 (_ULCAST_(1) << 12)
++#define IE_IRQ3 (_ULCAST_(1) << 13)
++#define IE_IRQ4 (_ULCAST_(1) << 14)
++#define IE_IRQ5 (_ULCAST_(1) << 15)
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
-+#define net_device device
++#ifndef ST0_UM
++/*
++ * Bitfields in the mips32 cp0 status register
++ */
++#define ST0_IE 0x00000001
++#define ST0_EXL 0x00000002
++#define ST0_ERL 0x00000004
++#define ST0_UM 0x00000010
++#define ST0_SWINT0 0x00000100
++#define ST0_SWINT1 0x00000200
++#define ST0_HWINT0 0x00000400
++#define ST0_HWINT1 0x00000800
++#define ST0_HWINT2 0x00001000
++#define ST0_HWINT3 0x00002000
++#define ST0_HWINT4 0x00004000
++#define ST0_HWINT5 0x00008000
++#define ST0_IM 0x0000ff00
++#define ST0_NMI 0x00080000
++#define ST0_SR 0x00100000
++#define ST0_TS 0x00200000
++#define ST0_BEV 0x00400000
++#define ST0_RE 0x02000000
++#define ST0_RP 0x08000000
++#define ST0_CU 0xf0000000
++#define ST0_CU0 0x10000000
++#define ST0_CU1 0x20000000
++#define ST0_CU2 0x40000000
++#define ST0_CU3 0x80000000
+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
+
+/*
-+ * DMA mapping
-+ *
-+ * See linux/Documentation/DMA-mapping.txt
++ * Bitfields in the mips32 cp0 cause register
+ */
++#define C_EXC 0x0000007c
++#define C_EXC_SHIFT 2
++#define C_INT 0x0000ff00
++#define C_INT_SHIFT 8
++#define C_SW0 (_ULCAST_(1) << 8)
++#define C_SW1 (_ULCAST_(1) << 9)
++#define C_IRQ0 (_ULCAST_(1) << 10)
++#define C_IRQ1 (_ULCAST_(1) << 11)
++#define C_IRQ2 (_ULCAST_(1) << 12)
++#define C_IRQ3 (_ULCAST_(1) << 13)
++#define C_IRQ4 (_ULCAST_(1) << 14)
++#define C_IRQ5 (_ULCAST_(1) << 15)
++#define C_WP 0x00400000
++#define C_IV 0x00800000
++#define C_CE 0x30000000
++#define C_CE_SHIFT 28
++#define C_BD 0x80000000
+
-+#ifndef PCI_DMA_TODEVICE
-+#define PCI_DMA_TODEVICE 1
-+#define PCI_DMA_FROMDEVICE 2
-+#endif
-+
-+typedef u32 dma_addr_t;
-+
-+/* Pure 2^n version of get_order */
-+static inline int get_order(unsigned long size)
-+{
-+ int order;
-+
-+ size = (size-1) >> (PAGE_SHIFT-1);
-+ order = -1;
-+ do {
-+ size >>= 1;
-+ order++;
-+ } while (size);
-+ return order;
-+}
-+
-+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+ dma_addr_t *dma_handle)
-+{
-+ void *ret;
-+ int gfp = GFP_ATOMIC | GFP_DMA;
-+
-+ ret = (void *)__get_free_pages(gfp, get_order(size));
-+
-+ if (ret != NULL) {
-+ memset(ret, 0, size);
-+ *dma_handle = virt_to_bus(ret);
-+ }
-+ return ret;
-+}
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+ void *vaddr, dma_addr_t dma_handle)
-+{
-+ free_pages((unsigned long)vaddr, get_order(size));
-+}
-+#ifdef ILSIM
-+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-+#else
-+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
-+#define pci_unmap_single(cookie, address, size, dir)
-+#endif
-+
-+#endif /* DMA mapping */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
-+
-+#define dev_kfree_skb_any(a) dev_kfree_skb(a)
-+#define netif_down(dev) do { (dev)->start = 0; } while(0)
-+
-+/* pcmcia-cs provides its own netdevice compatibility layer */
-+#ifndef _COMPAT_NETDEVICE_H
-+
-+/*
-+ * SoftNet
-+ *
-+ * For pre-softnet kernels we need to tell the upper layer not to
-+ * re-enter start_xmit() while we are in there. However softnet
-+ * guarantees not to enter while we are in there so there is no need
-+ * to do the netif_stop_queue() dance unless the transmit queue really
-+ * gets stuck. This should also improve performance according to tests
-+ * done by Aman Singla.
-+ */
-+
-+#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
-+#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
-+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
-+
-+static inline void netif_start_queue(struct net_device *dev)
-+{
-+ dev->tbusy = 0;
-+ dev->interrupt = 0;
-+ dev->start = 1;
-+}
-+
-+#define netif_queue_stopped(dev) (dev)->tbusy
-+#define netif_running(dev) (dev)->start
-+
-+#endif /* _COMPAT_NETDEVICE_H */
-+
-+#define netif_device_attach(dev) netif_start_queue(dev)
-+#define netif_device_detach(dev) netif_stop_queue(dev)
-+
-+/* 2.4.x renamed bottom halves to tasklets */
-+#define tasklet_struct tq_struct
-+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-+{
-+ queue_task(tasklet, &tq_immediate);
-+ mark_bh(IMMEDIATE_BH);
-+}
-+
-+static inline void tasklet_init(struct tasklet_struct *tasklet,
-+ void (*func)(unsigned long),
-+ unsigned long data)
-+{
-+ tasklet->next = NULL;
-+ tasklet->sync = 0;
-+ tasklet->routine = (void (*)(void *))func;
-+ tasklet->data = (void *)data;
-+}
-+#define tasklet_kill(tasklet) {do{} while(0);}
-+
-+/* 2.4.x introduced del_timer_sync() */
-+#define del_timer_sync(timer) del_timer(timer)
-+
-+#else
-+
-+#define netif_down(dev)
-+
-+#endif /* SoftNet */
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
-+
-+/*
-+ * Emit code to initialise a tq_struct's routine and data pointers
-+ */
-+#define PREPARE_TQUEUE(_tq, _routine, _data) \
-+ do { \
-+ (_tq)->routine = _routine; \
-+ (_tq)->data = _data; \
-+ } while (0)
-+
-+/*
-+ * Emit code to initialise all of a tq_struct
-+ */
-+#define INIT_TQUEUE(_tq, _routine, _data) \
-+ do { \
-+ INIT_LIST_HEAD(&(_tq)->list); \
-+ (_tq)->sync = 0; \
-+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
-+ } while (0)
-+
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
-+
-+/* Power management related routines */
-+
-+static inline int
-+pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+ int i;
-+ if (buffer) {
-+ for (i = 0; i < 16; i++)
-+ pci_read_config_dword(dev, i * 4,&buffer[i]);
-+ }
-+ return 0;
-+}
-+
-+static inline int
-+pci_restore_state(struct pci_dev *dev, u32 *buffer)
-+{
-+ int i;
-+
-+ if (buffer) {
-+ for (i = 0; i < 16; i++)
-+ pci_write_config_dword(dev,i * 4, buffer[i]);
-+ }
-+ /*
-+ * otherwise, write the context information we know from bootup.
-+ * This works around a problem where warm-booting from Windows
-+ * combined with a D3(hot)->D0 transition causes PCI config
-+ * header data to be forgotten.
-+ */
-+ else {
-+ for (i = 0; i < 6; i ++)
-+ pci_write_config_dword(dev,
-+ PCI_BASE_ADDRESS_0 + (i * 4),
-+ pci_resource_start(dev, i));
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+ }
-+ return 0;
-+}
-+
-+#endif /* PCI power management */
-+
-+/* Old cp0 access macros deprecated in 2.4.19 */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
-+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-+#endif
-+
-+/* Module refcount handled internally in 2.6.x */
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev) do {} while (0)
-+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
-+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
-+#else
-+#define OLD_MOD_INC_USE_COUNT do {} while (0)
-+#define OLD_MOD_DEC_USE_COUNT do {} while (0)
-+#endif
-+
-+#ifndef SET_NETDEV_DEV
-+#define SET_NETDEV_DEV(net, pdev) do {} while (0)
-+#endif
-+
-+#ifndef HAVE_FREE_NETDEV
-+#define free_netdev(dev) kfree(dev)
-+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-+/* struct packet_type redefined in 2.6.x */
-+#define af_packet_priv data
-+#endif
-+
-+#endif /* _linuxver_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/min_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/min_osl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/min_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/min_osl.h 2005-12-16 23:39:10.748824500 +0100
-@@ -0,0 +1,126 @@
-+/*
-+ * HND Minimal OS Abstraction Layer.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _min_osl_h_
-+#define _min_osl_h_
-+
-+#include <typedefs.h>
-+#include <sbconfig.h>
-+#include <mipsinc.h>
-+
-+/* Cache support */
-+extern void caches_on(void);
-+extern void blast_dcache(void);
-+extern void blast_icache(void);
-+
-+/* uart output */
-+extern void putc(int c);
-+
-+/* lib functions */
-+extern int printf(const char *fmt, ...);
-+extern int sprintf(char *buf, const char *fmt, ...);
-+extern int strcmp(const char *s1, const char *s2);
-+extern int strncmp(const char *s1, const char *s2, uint n);
-+extern char *strcpy(char *dest, const char *src);
-+extern char *strncpy(char *dest, const char *src, uint n);
-+extern uint strlen(const char *s);
-+extern char *strchr(const char *str,int c);
-+extern char *strrchr(const char *str, int c);
-+extern char *strcat(char *d, const char *s);
-+extern void *memset(void *dest, int c, uint n);
-+extern void *memcpy(void *dest, const void *src, uint n);
-+extern int memcmp(const void *s1, const void *s2, uint n);
-+#define bcopy(src, dst, len) memcpy((dst), (src), (len))
-+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
-+#define bzero(b, len) memset((b), '\0', (len))
-+
-+/* assert & debugging */
-+#define ASSERT(exp) do {} while (0)
-+
-+/* PCMCIA attribute space access macros */
-+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
-+ ASSERT(0)
-+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
-+ ASSERT(0)
-+
-+/* PCI configuration space access macros */
-+#define OSL_PCI_READ_CONFIG(loc, offset, size) \
-+ (offset == 8 ? 0 : 0xffffffff)
-+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
-+ do {} while (0)
-+
-+/* PCI device bus # and slot # */
-+#define OSL_PCI_BUS(osh) (0)
-+#define OSL_PCI_SLOT(osh) (0)
-+
-+/* register access macros */
-+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v))
-+#define rreg32(r) (*(volatile uint32*)(r))
-+#define wreg16(r, v) (*(volatile uint16*)(r) = (uint16)(v))
-+#define rreg16(r) (*(volatile uint16*)(r))
-+#define wreg8(r, v) (*(volatile uint8*)(r) = (uint8)(v))
-+#define rreg8(r) (*(volatile uint8*)(r))
-+#define R_REG(r) ({ \
-+ __typeof(*(r)) __osl_v; \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): __osl_v = rreg8((r)); break; \
-+ case sizeof(uint16): __osl_v = rreg16((r)); break; \
-+ case sizeof(uint32): __osl_v = rreg32((r)); break; \
-+ } \
-+ __osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): wreg8((r), (v)); break; \
-+ case sizeof(uint16): wreg16((r), (v)); break; \
-+ case sizeof(uint32): wreg32((r), (v)); break; \
-+ } \
-+} while (0)
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
-+
-+/* general purpose memory allocation */
-+#define MALLOC(osh, size) malloc(size)
-+#define MFREE(osh, addr, size) free(addr)
-+#define MALLOCED(osh) 0
-+#define MALLOC_FAILED(osh) 0
-+#define MALLOC_DUMP(osh, buf, sz)
-+extern int free(void *ptr);
-+extern void *malloc(uint size);
-+
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va) ((void*)KSEG1ADDR((ulong)(va)))
-+
-+/* host/bus architecture-specific address byte swap */
-+#define BUS_SWAP32(v) (v)
-+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) udelay(usec)
-+extern void udelay(uint32 usec);
-+
-+/* map/unmap physical to virtual I/O */
-+#define REG_MAP(pa, size) ((void*)KSEG1ADDR((ulong)(pa)))
-+#define REG_UNMAP(va) do {} while (0)
-+
-+/* dereference an address that may cause a bus exception */
-+#define BUSPROBE(val, addr) (uint32 *)(addr) = (val)
-+
-+/* Misc stubs */
-+#define osl_attach(pdev) ((osl_t*)pdev)
-+#define osl_detach(osh)
-+extern void *osl_init(void);
-+#define OSL_ERROR(bcmerror) osl_error(bcmerror)
-+extern int osl_error(int);
-+
-+#endif /* _min_osl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h
---- linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-12-16 23:39:10.748824500 +0100
-@@ -0,0 +1,552 @@
-+/*
-+ * HND Run Time Environment for standalone MIPS programs.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _MISPINC_H
-+#define _MISPINC_H
-+
-+
-+/* MIPS defines */
-+
-+#ifdef _LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Symbolic register names for 32 bit ABI
-+ */
-+#define zero $0 /* wired zero */
-+#define AT $1 /* assembler temp - uppercase because of ".set at" */
-+#define v0 $2 /* return value */
-+#define v1 $3
-+#define a0 $4 /* argument registers */
-+#define a1 $5
-+#define a2 $6
-+#define a3 $7
-+#define t0 $8 /* caller saved */
-+#define t1 $9
-+#define t2 $10
-+#define t3 $11
-+#define t4 $12
-+#define t5 $13
-+#define t6 $14
-+#define t7 $15
-+#define s0 $16 /* callee saved */
-+#define s1 $17
-+#define s2 $18
-+#define s3 $19
-+#define s4 $20
-+#define s5 $21
-+#define s6 $22
-+#define s7 $23
-+#define t8 $24 /* caller saved */
-+#define t9 $25
-+#define jp $25 /* PIC jump register */
-+#define k0 $26 /* kernel scratch */
-+#define k1 $27
-+#define gp $28 /* global pointer */
-+#define sp $29 /* stack pointer */
-+#define fp $30 /* frame pointer */
-+#define s8 $30 /* same like fp! */
-+#define ra $31 /* return address */
-+
-+
-+/*
-+ * CP0 Registers
-+ */
-+
-+#define C0_INX $0
-+#define C0_RAND $1
-+#define C0_TLBLO0 $2
-+#define C0_TLBLO C0_TLBLO0
-+#define C0_TLBLO1 $3
-+#define C0_CTEXT $4
-+#define C0_PGMASK $5
-+#define C0_WIRED $6
-+#define C0_BADVADDR $8
-+#define C0_COUNT $9
-+#define C0_TLBHI $10
-+#define C0_COMPARE $11
-+#define C0_SR $12
-+#define C0_STATUS C0_SR
-+#define C0_CAUSE $13
-+#define C0_EPC $14
-+#define C0_PRID $15
-+#define C0_CONFIG $16
-+#define C0_LLADDR $17
-+#define C0_WATCHLO $18
-+#define C0_WATCHHI $19
-+#define C0_XCTEXT $20
-+#define C0_DIAGNOSTIC $22
-+#define C0_BROADCOM C0_DIAGNOSTIC
-+#define C0_PERFORMANCE $25
-+#define C0_ECC $26
-+#define C0_CACHEERR $27
-+#define C0_TAGLO $28
-+#define C0_TAGHI $29
-+#define C0_ERREPC $30
-+#define C0_DESAVE $31
-+
-+/*
-+ * LEAF - declare leaf routine
-+ */
-+#define LEAF(symbol) \
-+ .globl symbol; \
-+ .align 2; \
-+ .type symbol,@function; \
-+ .ent symbol,0; \
-+symbol: .frame sp,0,ra
-+
-+/*
-+ * END - mark end of function
-+ */
-+#define END(function) \
-+ .end function; \
-+ .size function,.-function
-+
-+#define _ULCAST_
-+
-+#else
-+
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
-+
-+#define _ULCAST_ (unsigned long)
-+
-+
-+/*
-+ * CP0 Registers
-+ */
-+
-+#define C0_INX 0 /* CP0: TLB Index */
-+#define C0_RAND 1 /* CP0: TLB Random */
-+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
-+#define C0_CTEXT 4 /* CP0: Context */
-+#define C0_PGMASK 5 /* CP0: TLB PageMask */
-+#define C0_WIRED 6 /* CP0: TLB Wired */
-+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
-+#define C0_COUNT 9 /* CP0: Count */
-+#define C0_TLBHI 10 /* CP0: TLB EntryHi */
-+#define C0_COMPARE 11 /* CP0: Compare */
-+#define C0_SR 12 /* CP0: Processor Status */
-+#define C0_STATUS C0_SR /* CP0: Processor Status */
-+#define C0_CAUSE 13 /* CP0: Exception Cause */
-+#define C0_EPC 14 /* CP0: Exception PC */
-+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG 16 /* CP0: Config */
-+#define C0_LLADDR 17 /* CP0: LLAddr */
-+#define C0_WATCHLO 18 /* CP0: WatchpointLo */
-+#define C0_WATCHHI 19 /* CP0: WatchpointHi */
-+#define C0_XCTEXT 20 /* CP0: XContext */
-+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
-+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
-+#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
-+#define C0_ECC 26 /* CP0: ECC */
-+#define C0_CACHEERR 27 /* CP0: CacheErr */
-+#define C0_TAGLO 28 /* CP0: TagLo */
-+#define C0_TAGHI 29 /* CP0: TagHi */
-+#define C0_ERREPC 30 /* CP0: ErrorEPC */
-+#define C0_DESAVE 31 /* CP0: DebugSave */
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+/*
-+ * Memory segments (32bit kernel mode addresses)
-+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG 0x00000000
-+#define KSEG0 0x80000000
-+#define KSEG1 0xa0000000
-+#define KSEG2 0xc0000000
-+#define KSEG3 0xe0000000
-+#define PHYSADDR_MASK 0x1fffffff
-+
-+/*
-+ * Map an address to a certain kernel segment
-+ */
-+#undef PHYSADDR
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+
-+#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK)
-+#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
-+#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
-+#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
-+#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
-+
-+
-+#ifndef Index_Invalidate_I
-+/*
-+ * Cache Operations
-+ */
-+#define Index_Invalidate_I 0x00
-+#define Index_Writeback_Inv_D 0x01
-+#define Index_Invalidate_SI 0x02
-+#define Index_Writeback_Inv_SD 0x03
-+#define Index_Load_Tag_I 0x04
-+#define Index_Load_Tag_D 0x05
-+#define Index_Load_Tag_SI 0x06
-+#define Index_Load_Tag_SD 0x07
-+#define Index_Store_Tag_I 0x08
-+#define Index_Store_Tag_D 0x09
-+#define Index_Store_Tag_SI 0x0A
-+#define Index_Store_Tag_SD 0x0B
-+#define Create_Dirty_Excl_D 0x0d
-+#define Create_Dirty_Excl_SD 0x0f
-+#define Hit_Invalidate_I 0x10
-+#define Hit_Invalidate_D 0x11
-+#define Hit_Invalidate_SI 0x12
-+#define Hit_Invalidate_SD 0x13
-+#define Fill_I 0x14
-+#define Hit_Writeback_Inv_D 0x15
-+ /* 0x16 is unused */
-+#define Hit_Writeback_Inv_SD 0x17
-+#define R5K_Page_Invalidate_S 0x17
-+#define Hit_Writeback_I 0x18
-+#define Hit_Writeback_D 0x19
-+ /* 0x1a is unused */
-+#define Hit_Writeback_SD 0x1b
-+ /* 0x1c is unused */
-+ /* 0x1e is unused */
-+#define Hit_Set_Virtual_SI 0x1e
-+#define Hit_Set_Virtual_SD 0x1f
-+#endif
-+
-+
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#define IE_SW0 (_ULCAST_(1) << 8)
-+#define IE_SW1 (_ULCAST_(1) << 9)
-+#define IE_IRQ0 (_ULCAST_(1) << 10)
-+#define IE_IRQ1 (_ULCAST_(1) << 11)
-+#define IE_IRQ2 (_ULCAST_(1) << 12)
-+#define IE_IRQ3 (_ULCAST_(1) << 13)
-+#define IE_IRQ4 (_ULCAST_(1) << 14)
-+#define IE_IRQ5 (_ULCAST_(1) << 15)
-+
-+#ifndef ST0_UM
-+/*
-+ * Bitfields in the mips32 cp0 status register
-+ */
-+#define ST0_IE 0x00000001
-+#define ST0_EXL 0x00000002
-+#define ST0_ERL 0x00000004
-+#define ST0_UM 0x00000010
-+#define ST0_SWINT0 0x00000100
-+#define ST0_SWINT1 0x00000200
-+#define ST0_HWINT0 0x00000400
-+#define ST0_HWINT1 0x00000800
-+#define ST0_HWINT2 0x00001000
-+#define ST0_HWINT3 0x00002000
-+#define ST0_HWINT4 0x00004000
-+#define ST0_HWINT5 0x00008000
-+#define ST0_IM 0x0000ff00
-+#define ST0_NMI 0x00080000
-+#define ST0_SR 0x00100000
-+#define ST0_TS 0x00200000
-+#define ST0_BEV 0x00400000
-+#define ST0_RE 0x02000000
-+#define ST0_RP 0x08000000
-+#define ST0_CU 0xf0000000
-+#define ST0_CU0 0x10000000
-+#define ST0_CU1 0x20000000
-+#define ST0_CU2 0x40000000
-+#define ST0_CU3 0x80000000
-+#endif
-+
-+
-+/*
-+ * Bitfields in the mips32 cp0 cause register
-+ */
-+#define C_EXC 0x0000007c
-+#define C_EXC_SHIFT 2
-+#define C_INT 0x0000ff00
-+#define C_INT_SHIFT 8
-+#define C_SW0 (_ULCAST_(1) << 8)
-+#define C_SW1 (_ULCAST_(1) << 9)
-+#define C_IRQ0 (_ULCAST_(1) << 10)
-+#define C_IRQ1 (_ULCAST_(1) << 11)
-+#define C_IRQ2 (_ULCAST_(1) << 12)
-+#define C_IRQ3 (_ULCAST_(1) << 13)
-+#define C_IRQ4 (_ULCAST_(1) << 14)
-+#define C_IRQ5 (_ULCAST_(1) << 15)
-+#define C_WP 0x00400000
-+#define C_IV 0x00800000
-+#define C_CE 0x30000000
-+#define C_CE_SHIFT 28
-+#define C_BD 0x80000000
-+
-+/* Values in C_EXC */
-+#define EXC_INT 0
-+#define EXC_TLBM 1
-+#define EXC_TLBL 2
-+#define EXC_TLBS 3
-+#define EXC_AEL 4
-+#define EXC_AES 5
-+#define EXC_IBE 6
-+#define EXC_DBE 7
-+#define EXC_SYS 8
-+#define EXC_BPT 9
-+#define EXC_RI 10
-+#define EXC_CU 11
-+#define EXC_OV 12
-+#define EXC_TR 13
-+#define EXC_WATCH 23
-+#define EXC_MCHK 24
-+
-+
-+/*
-+ * Bits in the cp0 config register.
-+ */
-+#define CONF_CM_CACHABLE_NO_WA 0
-+#define CONF_CM_CACHABLE_WA 1
-+#define CONF_CM_UNCACHED 2
-+#define CONF_CM_CACHABLE_NONCOHERENT 3
-+#define CONF_CM_CACHABLE_CE 4
-+#define CONF_CM_CACHABLE_COW 5
-+#define CONF_CM_CACHABLE_CUW 6
-+#define CONF_CM_CACHABLE_ACCELERATED 7
-+#define CONF_CM_CMASK 7
-+#define CONF_CU (_ULCAST_(1) << 3)
-+#define CONF_DB (_ULCAST_(1) << 4)
-+#define CONF_IB (_ULCAST_(1) << 5)
-+#define CONF_SE (_ULCAST_(1) << 12)
-+#define CONF_SC (_ULCAST_(1) << 17)
-+#define CONF_AC (_ULCAST_(1) << 23)
-+#define CONF_HALT (_ULCAST_(1) << 25)
-+
-+
-+/*
-+ * Bits in the cp0 config register select 1.
-+ */
-+#define CONF1_FP 0x00000001 /* FPU present */
-+#define CONF1_EP 0x00000002 /* EJTAG present */
-+#define CONF1_CA 0x00000004 /* mips16 implemented */
-+#define CONF1_WR 0x00000008 /* Watch registers present */
-+#define CONF1_PC 0x00000010 /* Performance counters present */
-+#define CONF1_DA_SHIFT 7 /* D$ associativity */
-+#define CONF1_DA_MASK 0x00000380
-+#define CONF1_DA_BASE 1
-+#define CONF1_DL_SHIFT 10 /* D$ line size */
-+#define CONF1_DL_MASK 0x00001c00
-+#define CONF1_DL_BASE 2
-+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-+#define CONF1_DS_MASK 0x0000e000
-+#define CONF1_DS_BASE 64
-+#define CONF1_IA_SHIFT 16 /* I$ associativity */
-+#define CONF1_IA_MASK 0x00070000
-+#define CONF1_IA_BASE 1
-+#define CONF1_IL_SHIFT 19 /* I$ line size */
-+#define CONF1_IL_MASK 0x00380000
-+#define CONF1_IL_BASE 2
-+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-+#define CONF1_IS_MASK 0x01c00000
-+#define CONF1_IS_BASE 64
-+#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
-+#define CONF1_MS_SHIFT 25
-+
-+/* PRID register */
-+#define PRID_COPT_MASK 0xff000000
-+#define PRID_COMP_MASK 0x00ff0000
-+#define PRID_IMP_MASK 0x0000ff00
-+#define PRID_REV_MASK 0x000000ff
-+
-+#define PRID_COMP_LEGACY 0x000000
-+#define PRID_COMP_MIPS 0x010000
-+#define PRID_COMP_BROADCOM 0x020000
-+#define PRID_COMP_ALCHEMY 0x030000
-+#define PRID_COMP_SIBYTE 0x040000
-+#define PRID_IMP_BCM4710 0x4000
-+#define PRID_IMP_BCM3302 0x9000
-+#define PRID_IMP_BCM3303 0x9100
-+
-+#define PRID_IMP_UNKNOWN 0xff00
-+
-+#define BCM330X(id) \
-+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
-+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-+
-+/* Bits in C0_BROADCOM */
-+#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
-+#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
-+#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
-+#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
-+
-+/* PreFetch Cache aka Read Ahead Cache */
-+
-+#define PFC_CR0 0xff400000 /* control reg 0 */
-+#define PFC_CR1 0xff400004 /* control reg 1 */
-+
-+/* PFC operations */
-+#define PFC_I 0x00000001 /* Enable PFC use for instructions */
-+#define PFC_D 0x00000002 /* Enable PFC use for data */
-+#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
-+#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
-+#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
-+#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
-+#define PFC_DPF 0x00000040 /* Enable directional prefetching */
-+#define PFC_FLUSH 0x00000100 /* Flush the PFC */
-+#define PFC_BRR 0x40000000 /* Bus error indication */
-+#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
-+
-+/* Handy defaults */
-+#define PFC_DISABLED 0
-+#define PFC_AUTO 0xffffffff /* auto select the default mode */
-+#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
-+#define PFC_INST_NOPF (PFC_I | PFC_CINV)
-+#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
-+#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
-+#define PFC_I_AND_D (PFC_INST | PFC_DATA)
-+#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
-+
-+
-+/*
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register. These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
-+
-+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
-+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
-+#define UART_LCR 3 /* Out: Line Control Register */
-+#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_LSR 5 /* In: Line Status Register */
-+#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_SCR 7 /* I/O: Scratch Register */
-+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-+#define UART_LSR_RXRDY 0x01 /* Receiver ready */
-+
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
-+
-+#define MFC0(source, sel) \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
-+ "move\t%0,$1\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res) \
-+ : \
-+ :"$1"); \
-+ __res; \
-+})
-+
-+#define MTC0(source, sel, value) \
-+do { \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "move\t$1,%z0\n\t" \
-+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ : \
-+ :"jr" (value) \
-+ :"$1"); \
-+} while (0)
-+
-+#define get_c0_count() \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "mfc0\t%0,$9\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res)); \
-+ __res; \
-+})
-+
-+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+ uint lsz, sets, ways;
-+
-+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
-+ lsz = CONF1_IL_BASE << lsz;
-+ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
-+ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
-+ *size = lsz * sets * ways;
-+ *lsize = lsz;
-+}
-+
-+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
-+{
-+ uint lsz, sets, ways;
-+
-+ /* Data Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
-+ lsz = CONF1_DL_BASE << lsz;
-+ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
-+ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
-+ *size = lsz * sets * ways;
-+ *lsize = lsz;
-+}
-+
-+#define cache_op(base, op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1, (%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
-+
-+#define cache_unroll4(base, delta, op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1,0(%0); \
-+ cache %1,delta(%0); \
-+ cache %1,(2 * delta)(%0); \
-+ cache %1,(3 * delta)(%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
-+#endif /* _MISPINC_H */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/nvports.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/nvports.h
---- linux-2.4.32/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/nvports.h 2005-12-16 23:39:10.748824500 +0100
-@@ -0,0 +1,55 @@
-+/*
-+ * BCM53xx RoboSwitch utility functions
-+ *
-+ * Copyright (C) 2002 Broadcom Corporation
-+ * $Id$
-+ */
-+
-+#ifndef _nvports_h_
-+#define _nvports_h_
-+
-+#define uint32 unsigned long
-+#define uint16 unsigned short
-+#define uint unsigned int
-+#define uint8 unsigned char
-+#define uint64 unsigned long long
-+
-+enum FORCE_PORT {
-+ FORCE_OFF,
-+ FORCE_10H,
-+ FORCE_10F,
-+ FORCE_100H,
-+ FORCE_100F,
-+ FORCE_DOWN,
-+ POWER_OFF
-+};
-+
-+typedef struct _PORT_ATTRIBS
-+{
-+ uint autoneg;
-+ uint force;
-+ uint native;
-+} PORT_ATTRIBS;
-+
-+extern uint
-+nvExistsPortAttrib(char *attrib, uint portno);
-+
-+extern int
-+nvExistsAnyForcePortAttrib(uint portno);
-+
-+extern void
-+nvSetPortAttrib(char *attrib, uint portno);
-+
-+extern void
-+nvUnsetPortAttrib(char *attrib, uint portno);
-+
-+extern void
-+nvUnsetAllForcePortAttrib(uint portno);
-+
-+extern PORT_ATTRIBS
-+nvGetSwitchPortAttribs(uint portno);
-+
-+#endif /* _nvports_h_ */
-+
-+
-+
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h 2005-12-16 23:39:10.748824500 +0100
-@@ -0,0 +1,42 @@
-+/*
-+ * OS Abstraction Layer
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _osl_h_
-+#define _osl_h_
-+
-+/* osl handle type forward declaration */
-+typedef struct os_handle osl_t;
-+
-+#if defined(linux)
-+#include <linux_osl.h>
-+#elif defined(NDIS)
-+#include <ndis_osl.h>
-+#elif defined(_CFE_)
-+#include <cfe_osl.h>
-+#elif defined(_HNDRTE_)
-+#include <hndrte_osl.h>
-+#elif defined(_MINOSL_)
-+#include <min_osl.h>
-+#elif PMON
-+#include <pmon_osl.h>
-+#elif defined(MACOSX)
-+#include <macosx_osl.h>
-+#else
-+#error "Unsupported OSL requested"
-+#endif
-+
-+/* handy */
-+#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
-+#define MAXPRIO 7 /* 0-7 */
-+
-+#endif /* _osl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h
---- linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-12-16 23:39:10.752824750 +0100
-@@ -0,0 +1,451 @@
-+/*
-+ * pcicfg.h: PCI configuration constants and structures.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _h_pci_
-+#define _h_pci_
-+
-+/* The following inside ifndef's so we don't collide with NTDDK.H */
-+#ifndef PCI_MAX_BUS
-+#define PCI_MAX_BUS 0x100
-+#endif
-+#ifndef PCI_MAX_DEVICES
-+#define PCI_MAX_DEVICES 0x20
-+#endif
-+#ifndef PCI_MAX_FUNCTION
-+#define PCI_MAX_FUNCTION 0x8
-+#endif
-+
-+#ifndef PCI_INVALID_VENDORID
-+#define PCI_INVALID_VENDORID 0xffff
-+#endif
-+#ifndef PCI_INVALID_DEVICEID
-+#define PCI_INVALID_DEVICEID 0xffff
-+#endif
-+
-+
-+/* Convert between bus-slot-function-register and config addresses */
-+
-+#define PCICFG_BUS_SHIFT 16 /* Bus shift */
-+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
-+#define PCICFG_FUN_SHIFT 8 /* Function shift */
-+#define PCICFG_OFF_SHIFT 0 /* Register shift */
-+
-+#define PCICFG_BUS_MASK 0xff /* Bus mask */
-+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
-+#define PCICFG_FUN_MASK 7 /* Function mask */
-+#define PCICFG_OFF_MASK 0xff /* Bus mask */
-+
-+#define PCI_CONFIG_ADDR(b, s, f, o) \
-+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
-+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
-+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
-+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
-+
-+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
-+
-+/* PCIE Config space accessing MACROS*/
-+
-+#define PCIECFG_BUS_SHIFT 24 /* Bus shift */
-+#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */
-+#define PCIECFG_FUN_SHIFT 16 /* Function shift */
-+#define PCIECFG_OFF_SHIFT 0 /* Register shift */
-+
-+#define PCIECFG_BUS_MASK 0xff /* Bus mask */
-+#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */
-+#define PCIECFG_FUN_MASK 7 /* Function mask */
-+#define PCIECFG_OFF_MASK 0x3ff /* Register mask */
-+
-+#define PCIE_CONFIG_ADDR(b, s, f, o) \
-+ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \
-+ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \
-+ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \
-+ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
-+
-+#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
-+#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
-+#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
-+#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
-+
-+
-+/* The actual config space */
-+
-+#define PCI_BAR_MAX 6
-+
-+#define PCI_ROM_BAR 8
-+
-+#define PCR_RSVDA_MAX 2
-+
-+/* pci config status reg has a bit to indicate that capability ptr is present*/
-+
-+#define PCI_CAPPTR_PRESENT 0x0010
-+
-+typedef struct _pci_config_regs {
-+ unsigned short vendor;
-+ unsigned short device;
-+ unsigned short command;
-+ unsigned short status;
-+ unsigned char rev_id;
-+ unsigned char prog_if;
-+ unsigned char sub_class;
-+ unsigned char base_class;
-+ unsigned char cache_line_size;
-+ unsigned char latency_timer;
-+ unsigned char header_type;
-+ unsigned char bist;
-+ unsigned long base[PCI_BAR_MAX];
-+ unsigned long cardbus_cis;
-+ unsigned short subsys_vendor;
-+ unsigned short subsys_id;
-+ unsigned long baserom;
-+ unsigned long rsvd_a[PCR_RSVDA_MAX];
-+ unsigned char int_line;
-+ unsigned char int_pin;
-+ unsigned char min_gnt;
-+ unsigned char max_lat;
-+ unsigned char dev_dep[192];
-+} pci_config_regs;
-+
-+#define SZPCR (sizeof (pci_config_regs))
-+#define MINSZPCR 64 /* offsetof (dev_dep[0] */
-+
-+/* A structure for the config registers is nice, but in most
-+ * systems the config space is not memory mapped, so we need
-+ * filed offsetts. :-(
-+ */
-+#define PCI_CFG_VID 0
-+#define PCI_CFG_DID 2
-+#define PCI_CFG_CMD 4
-+#define PCI_CFG_STAT 6
-+#define PCI_CFG_REV 8
-+#define PCI_CFG_PROGIF 9
-+#define PCI_CFG_SUBCL 0xa
-+#define PCI_CFG_BASECL 0xb
-+#define PCI_CFG_CLSZ 0xc
-+#define PCI_CFG_LATTIM 0xd
-+#define PCI_CFG_HDR 0xe
-+#define PCI_CFG_BIST 0xf
-+#define PCI_CFG_BAR0 0x10
-+#define PCI_CFG_BAR1 0x14
-+#define PCI_CFG_BAR2 0x18
-+#define PCI_CFG_BAR3 0x1c
-+#define PCI_CFG_BAR4 0x20
-+#define PCI_CFG_BAR5 0x24
-+#define PCI_CFG_CIS 0x28
-+#define PCI_CFG_SVID 0x2c
-+#define PCI_CFG_SSID 0x2e
-+#define PCI_CFG_ROMBAR 0x30
-+#define PCI_CFG_CAPPTR 0x34
-+#define PCI_CFG_INT 0x3c
-+#define PCI_CFG_PIN 0x3d
-+#define PCI_CFG_MINGNT 0x3e
-+#define PCI_CFG_MAXLAT 0x3f
-+
-+/* Classes and subclasses */
-+
-+typedef enum {
-+ PCI_CLASS_OLD = 0,
-+ PCI_CLASS_DASDI,
-+ PCI_CLASS_NET,
-+ PCI_CLASS_DISPLAY,
-+ PCI_CLASS_MMEDIA,
-+ PCI_CLASS_MEMORY,
-+ PCI_CLASS_BRIDGE,
-+ PCI_CLASS_COMM,
-+ PCI_CLASS_BASE,
-+ PCI_CLASS_INPUT,
-+ PCI_CLASS_DOCK,
-+ PCI_CLASS_CPU,
-+ PCI_CLASS_SERIAL,
-+ PCI_CLASS_INTELLIGENT = 0xe,
-+ PCI_CLASS_SATELLITE,
-+ PCI_CLASS_CRYPT,
-+ PCI_CLASS_DSP,
-+ PCI_CLASS_MAX
-+} pci_classes;
-+
-+typedef enum {
-+ PCI_DASDI_SCSI,
-+ PCI_DASDI_IDE,
-+ PCI_DASDI_FLOPPY,
-+ PCI_DASDI_IPI,
-+ PCI_DASDI_RAID,
-+ PCI_DASDI_OTHER = 0x80
-+} pci_dasdi_subclasses;
-+
-+typedef enum {
-+ PCI_NET_ETHER,
-+ PCI_NET_TOKEN,
-+ PCI_NET_FDDI,
-+ PCI_NET_ATM,
-+ PCI_NET_OTHER = 0x80
-+} pci_net_subclasses;
-+
-+typedef enum {
-+ PCI_DISPLAY_VGA,
-+ PCI_DISPLAY_XGA,
-+ PCI_DISPLAY_3D,
-+ PCI_DISPLAY_OTHER = 0x80
-+} pci_display_subclasses;
-+
-+typedef enum {
-+ PCI_MMEDIA_VIDEO,
-+ PCI_MMEDIA_AUDIO,
-+ PCI_MMEDIA_PHONE,
-+ PCI_MEDIA_OTHER = 0x80
-+} pci_mmedia_subclasses;
-+
-+typedef enum {
-+ PCI_MEMORY_RAM,
-+ PCI_MEMORY_FLASH,
-+ PCI_MEMORY_OTHER = 0x80
-+} pci_memory_subclasses;
-+
-+typedef enum {
-+ PCI_BRIDGE_HOST,
-+ PCI_BRIDGE_ISA,
-+ PCI_BRIDGE_EISA,
-+ PCI_BRIDGE_MC,
-+ PCI_BRIDGE_PCI,
-+ PCI_BRIDGE_PCMCIA,
-+ PCI_BRIDGE_NUBUS,
-+ PCI_BRIDGE_CARDBUS,
-+ PCI_BRIDGE_RACEWAY,
-+ PCI_BRIDGE_OTHER = 0x80
-+} pci_bridge_subclasses;
-+
-+typedef enum {
-+ PCI_COMM_UART,
-+ PCI_COMM_PARALLEL,
-+ PCI_COMM_MULTIUART,
-+ PCI_COMM_MODEM,
-+ PCI_COMM_OTHER = 0x80
-+} pci_comm_subclasses;
-+
-+typedef enum {
-+ PCI_BASE_PIC,
-+ PCI_BASE_DMA,
-+ PCI_BASE_TIMER,
-+ PCI_BASE_RTC,
-+ PCI_BASE_PCI_HOTPLUG,
-+ PCI_BASE_OTHER = 0x80
-+} pci_base_subclasses;
-+
-+typedef enum {
-+ PCI_INPUT_KBD,
-+ PCI_INPUT_PEN,
-+ PCI_INPUT_MOUSE,
-+ PCI_INPUT_SCANNER,
-+ PCI_INPUT_GAMEPORT,
-+ PCI_INPUT_OTHER = 0x80
-+} pci_input_subclasses;
-+
-+typedef enum {
-+ PCI_DOCK_GENERIC,
-+ PCI_DOCK_OTHER = 0x80
-+} pci_dock_subclasses;
-+
-+typedef enum {
-+ PCI_CPU_386,
-+ PCI_CPU_486,
-+ PCI_CPU_PENTIUM,
-+ PCI_CPU_ALPHA = 0x10,
-+ PCI_CPU_POWERPC = 0x20,
-+ PCI_CPU_MIPS = 0x30,
-+ PCI_CPU_COPROC = 0x40,
-+ PCI_CPU_OTHER = 0x80
-+} pci_cpu_subclasses;
-+
-+typedef enum {
-+ PCI_SERIAL_IEEE1394,
-+ PCI_SERIAL_ACCESS,
-+ PCI_SERIAL_SSA,
-+ PCI_SERIAL_USB,
-+ PCI_SERIAL_FIBER,
-+ PCI_SERIAL_SMBUS,
-+ PCI_SERIAL_OTHER = 0x80
-+} pci_serial_subclasses;
-+
-+typedef enum {
-+ PCI_INTELLIGENT_I2O,
-+} pci_intelligent_subclasses;
-+
-+typedef enum {
-+ PCI_SATELLITE_TV,
-+ PCI_SATELLITE_AUDIO,
-+ PCI_SATELLITE_VOICE,
-+ PCI_SATELLITE_DATA,
-+ PCI_SATELLITE_OTHER = 0x80
-+} pci_satellite_subclasses;
-+
-+typedef enum {
-+ PCI_CRYPT_NETWORK,
-+ PCI_CRYPT_ENTERTAINMENT,
-+ PCI_CRYPT_OTHER = 0x80
-+} pci_crypt_subclasses;
-+
-+typedef enum {
-+ PCI_DSP_DPIO,
-+ PCI_DSP_OTHER = 0x80
-+} pci_dsp_subclasses;
-+
-+/* Header types */
-+typedef enum {
-+ PCI_HEADER_NORMAL,
-+ PCI_HEADER_BRIDGE,
-+ PCI_HEADER_CARDBUS
-+} pci_header_types;
-+
-+
-+/* Overlay for a PCI-to-PCI bridge */
-+
-+#define PPB_RSVDA_MAX 2
-+#define PPB_RSVDD_MAX 8
-+
-+typedef struct _ppb_config_regs {
-+ unsigned short vendor;
-+ unsigned short device;
-+ unsigned short command;
-+ unsigned short status;
-+ unsigned char rev_id;
-+ unsigned char prog_if;
-+ unsigned char sub_class;
-+ unsigned char base_class;
-+ unsigned char cache_line_size;
-+ unsigned char latency_timer;
-+ unsigned char header_type;
-+ unsigned char bist;
-+ unsigned long rsvd_a[PPB_RSVDA_MAX];
-+ unsigned char prim_bus;
-+ unsigned char sec_bus;
-+ unsigned char sub_bus;
-+ unsigned char sec_lat;
-+ unsigned char io_base;
-+ unsigned char io_lim;
-+ unsigned short sec_status;
-+ unsigned short mem_base;
-+ unsigned short mem_lim;
-+ unsigned short pf_mem_base;
-+ unsigned short pf_mem_lim;
-+ unsigned long pf_mem_base_hi;
-+ unsigned long pf_mem_lim_hi;
-+ unsigned short io_base_hi;
-+ unsigned short io_lim_hi;
-+ unsigned short subsys_vendor;
-+ unsigned short subsys_id;
-+ unsigned long rsvd_b;
-+ unsigned char rsvd_c;
-+ unsigned char int_pin;
-+ unsigned short bridge_ctrl;
-+ unsigned char chip_ctrl;
-+ unsigned char diag_ctrl;
-+ unsigned short arb_ctrl;
-+ unsigned long rsvd_d[PPB_RSVDD_MAX];
-+ unsigned char dev_dep[192];
-+} ppb_config_regs;
-+
-+
-+/* PCI CAPABILITY DEFINES */
-+#define PCI_CAP_POWERMGMTCAP_ID 0x01
-+#define PCI_CAP_MSICAP_ID 0x05
-+#define PCI_CAP_PCIECAP_ID 0x10
++/* Values in C_EXC */
++#define EXC_INT 0
++#define EXC_TLBM 1
++#define EXC_TLBL 2
++#define EXC_TLBS 3
++#define EXC_AEL 4
++#define EXC_AES 5
++#define EXC_IBE 6
++#define EXC_DBE 7
++#define EXC_SYS 8
++#define EXC_BPT 9
++#define EXC_RI 10
++#define EXC_CU 11
++#define EXC_OV 12
++#define EXC_TR 13
++#define EXC_WATCH 23
++#define EXC_MCHK 24
+
-+/* Data structure to define the Message Signalled Interrupt facility
-+ * Valid for PCI and PCIE configurations */
-+typedef struct _pciconfig_cap_msi {
-+ unsigned char capID;
-+ unsigned char nextptr;
-+ unsigned short msgctrl;
-+ unsigned int msgaddr;
-+} pciconfig_cap_msi;
+
-+/* Data structure to define the Power managment facility
-+ * Valid for PCI and PCIE configurations */
-+typedef struct _pciconfig_cap_pwrmgmt {
-+ unsigned char capID;
-+ unsigned char nextptr;
-+ unsigned short pme_cap;
-+ unsigned short pme_sts_ctrl;
-+ unsigned char pme_bridge_ext;
-+ unsigned char data;
-+} pciconfig_cap_pwrmgmt;
++/*
++ * Bits in the cp0 config register.
++ */
++#define CONF_CM_CACHABLE_NO_WA 0
++#define CONF_CM_CACHABLE_WA 1
++#define CONF_CM_UNCACHED 2
++#define CONF_CM_CACHABLE_NONCOHERENT 3
++#define CONF_CM_CACHABLE_CE 4
++#define CONF_CM_CACHABLE_COW 5
++#define CONF_CM_CACHABLE_CUW 6
++#define CONF_CM_CACHABLE_ACCELERATED 7
++#define CONF_CM_CMASK 7
++#define CONF_CU (_ULCAST_(1) << 3)
++#define CONF_DB (_ULCAST_(1) << 4)
++#define CONF_IB (_ULCAST_(1) << 5)
++#define CONF_SE (_ULCAST_(1) << 12)
++#define CONF_SC (_ULCAST_(1) << 17)
++#define CONF_AC (_ULCAST_(1) << 23)
++#define CONF_HALT (_ULCAST_(1) << 25)
+
-+/* Data structure to define the PCIE capability */
-+typedef struct _pciconfig_cap_pcie {
-+ unsigned char capID;
-+ unsigned char nextptr;
-+ unsigned short pcie_cap;
-+ unsigned int dev_cap;
-+ unsigned short dev_ctrl;
-+ unsigned short dev_status;
-+ unsigned int link_cap;
-+ unsigned short link_ctrl;
-+ unsigned short link_status;
-+} pciconfig_cap_pcie;
+
-+/* PCIE Enhanced CAPABILITY DEFINES */
-+#define PCIE_EXTCFG_OFFSET 0x100
-+#define PCIE_ADVERRREP_CAPID 0x0001
-+#define PCIE_VC_CAPID 0x0002
-+#define PCIE_DEVSNUM_CAPID 0x0003
-+#define PCIE_PWRBUDGET_CAPID 0x0004
++/*
++ * Bits in the cp0 config register select 1.
++ */
++#define CONF1_FP 0x00000001 /* FPU present */
++#define CONF1_EP 0x00000002 /* EJTAG present */
++#define CONF1_CA 0x00000004 /* mips16 implemented */
++#define CONF1_WR 0x00000008 /* Watch registers present */
++#define CONF1_PC 0x00000010 /* Performance counters present */
++#define CONF1_DA_SHIFT 7 /* D$ associativity */
++#define CONF1_DA_MASK 0x00000380
++#define CONF1_DA_BASE 1
++#define CONF1_DL_SHIFT 10 /* D$ line size */
++#define CONF1_DL_MASK 0x00001c00
++#define CONF1_DL_BASE 2
++#define CONF1_DS_SHIFT 13 /* D$ sets/way */
++#define CONF1_DS_MASK 0x0000e000
++#define CONF1_DS_BASE 64
++#define CONF1_IA_SHIFT 16 /* I$ associativity */
++#define CONF1_IA_MASK 0x00070000
++#define CONF1_IA_BASE 1
++#define CONF1_IL_SHIFT 19 /* I$ line size */
++#define CONF1_IL_MASK 0x00380000
++#define CONF1_IL_BASE 2
++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
++#define CONF1_IS_MASK 0x01c00000
++#define CONF1_IS_BASE 64
++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
++#define CONF1_MS_SHIFT 25
+
-+/* Header to define the PCIE specific capabilities in the extended config space */
-+typedef struct _pcie_enhanced_caphdr {
-+ unsigned short capID;
-+ unsigned short cap_ver : 4;
-+ unsigned short next_ptr : 12;
-+} pcie_enhanced_caphdr;
++/* PRID register */
++#define PRID_COPT_MASK 0xff000000
++#define PRID_COMP_MASK 0x00ff0000
++#define PRID_IMP_MASK 0x0000ff00
++#define PRID_REV_MASK 0x000000ff
+
++#define PRID_COMP_LEGACY 0x000000
++#define PRID_COMP_MIPS 0x010000
++#define PRID_COMP_BROADCOM 0x020000
++#define PRID_COMP_ALCHEMY 0x030000
++#define PRID_COMP_SIBYTE 0x040000
++#define PRID_IMP_BCM4710 0x4000
++#define PRID_IMP_BCM3302 0x9000
++#define PRID_IMP_BCM3303 0x9100
+
-+/* Everything below is BRCM HND proprietary */
++#define PRID_IMP_UNKNOWN 0xff00
+
-+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
-+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
-+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
-+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
-+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
-+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
-+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
-+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
-+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */
-+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
-+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
-+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
++#define BCM330X(id) \
++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
+
-+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
-+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
++/* Bits in C0_BROADCOM */
++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
+
-+/* PCI_INT_STATUS */
-+#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */
++/* PreFetch Cache aka Read Ahead Cache */
+
-+/* PCI_INT_MASK */
-+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
-+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
-+#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */
++#define PFC_CR0 0xff400000 /* control reg 0 */
++#define PFC_CR1 0xff400004 /* control reg 1 */
+
-+/* PCI_SPROM_CONTROL */
-+#define SPROM_BLANK 0x04 /* indicating a blank sprom */
-+#define SPROM_WRITEEN 0x10 /* sprom write enable */
-+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
++/* PFC operations */
++#define PFC_I 0x00000001 /* Enable PFC use for instructions */
++#define PFC_D 0x00000002 /* Enable PFC use for data */
++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
++#define PFC_DPF 0x00000040 /* Enable directional prefetching */
++#define PFC_FLUSH 0x00000100 /* Flush the PFC */
++#define PFC_BRR 0x40000000 /* Bus error indication */
++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
+
-+#define SPROM_SIZE 256 /* sprom size in 16-bit */
-+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
++/* Handy defaults */
++#define PFC_DISABLED 0
++#define PFC_AUTO 0xffffffff /* auto select the default mode */
++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
++#define PFC_INST_NOPF (PFC_I | PFC_CINV)
++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
++#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
++#define PFC_I_AND_D (PFC_INST | PFC_DATA)
++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
+
-+/* PCI_CFG_CMD_STAT */
-+#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */
+
-+#endif
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pmon_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pmon_osl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/pmon_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pmon_osl.h 2005-12-16 23:39:10.752824750 +0100
-@@ -0,0 +1,126 @@
-+/*
-+ * MIPS PMON boot loader OS Abstraction Layer.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ * $Id$
++/*
++ * These are the UART port assignments, expressed as offsets from the base
++ * register. These assignments should hold for any serial port based on
++ * a 8250, 16450, or 16550(A).
+ */
+
-+#ifndef _pmon_osl_h_
-+#define _pmon_osl_h_
++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
++#define UART_LCR 3 /* Out: Line Control Register */
++#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_LSR 5 /* In: Line Status Register */
++#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_SCR 7 /* I/O: Scratch Register */
++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
++#define UART_LSR_RXRDY 0x01 /* Receiver ready */
+
-+#include <typedefs.h>
-+#include <mips.h>
-+#include <string.h>
-+#include <utypes.h>
+
-+extern int printf(char *fmt,...);
-+extern int sprintf(char *dst,char *fmt,...);
++#ifndef _LANGUAGE_ASSEMBLY
+
-+#define OSL_UNCACHED(va) phy2k1(log2phy((va)))
-+#define REG_MAP(pa, size) phy2k1((pa))
-+#define REG_UNMAP(va) /* nop */
++/*
++ * Macros to access the system control coprocessor
++ */
+
-+/* Common macros */
++#define MFC0(source, sel) \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
++ "move\t%0,$1\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res) \
++ : \
++ :"$1"); \
++ __res; \
++})
+
-+#define BUSPROBE(val, addr) ((val) = *(addr))
++#define MTC0(source, sel, value) \
++do { \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "move\t$1,%z0\n\t" \
++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ : \
++ :"jr" (value) \
++ :"$1"); \
++} while (0)
+
-+#define ASSERT(exp)
++#define get_c0_count() \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "mfc0\t%0,$9\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res)); \
++ __res; \
++})
+
-+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) bzero(buf, size)
-+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size)
++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
+
-+/* kludge */
-+#define OSL_PCI_READ_CONFIG(loc, offset, size) ((offset == 8)? 0: 0xffffffff)
-+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) ASSERT(0)
++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
++ lsz = CONF1_IL_BASE << lsz;
++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
+
-+#define wreg32(r,v) (*(volatile uint32 *)(r) = (v))
-+#define rreg32(r) (*(volatile uint32 *)(r))
-+#ifdef IL_BIGENDIAN
-+#define wreg16(r,v) (*(volatile uint16 *)((uint32)r^2) = (v))
-+#define rreg16(r) (*(volatile uint16 *)((uint32)r^2))
-+#else
-+#define wreg16(r,v) (*(volatile uint16 *)(r) = (v))
-+#define rreg16(r) (*(volatile uint16 *)(r))
-+#endif
++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
++{
++ uint lsz, sets, ways;
+
-+#include <memory.h>
-+#define bcopy(src, dst, len) memcpy(dst, src, len)
-+#define bcmp(b1, b2, len) memcmp(b1, b2, len)
-+#define bzero(b, len) memset(b, '\0', len)
++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
++ lsz = CONF1_DL_BASE << lsz;
++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
++ *size = lsz * sets * ways;
++ *lsize = lsz;
++}
+
-+/* register access macros */
-+#define R_REG(r) ((sizeof *(r) == sizeof (uint32))? rreg32(r): rreg16(r))
-+#define W_REG(r,v) ((sizeof *(r) == sizeof (uint32))? wreg32(r,(uint32)v): wreg16(r,(uint16)v))
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
++#define cache_op(base, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, (%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
+
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) memset(r, '\0', len)
-+
-+/* Host/Bus architecture specific swap. Noop for little endian systems, possible swap on big endian */
-+#define BUS_SWAP32(v) (v)
-+
-+#define OSL_DELAY(usec) delay_us(usec)
-+extern void delay_us(uint usec);
-+
-+#define OSL_GETCYCLES(x) ((x) = 0)
-+
-+#define osl_attach(pdev) (pdev)
-+#define osl_detach(osh)
-+
-+#define MALLOC(osh, size) malloc(size)
-+#define MFREE(osh, addr, size) free(addr)
-+#define MALLOCED(osh) (0)
-+#define MALLOC_DUMP(osh, buf, sz)
-+#define MALLOC_FAILED(osh)
-+extern void *malloc();
-+extern void free(void *addr);
-+
-+#define DMA_CONSISTENT_ALIGN sizeof (int)
-+#define DMA_ALLOC_CONSISTENT(osh, size, pap) et_dma_alloc_consistent(osh, size, pap)
-+#define DMA_FREE_CONSISTENT(osh, va, size, pa)
-+extern void* et_dma_alloc_consistent(void *osh, uint size, ulong *pap);
-+#define DMA_TX 0
-+#define DMA_RX 1
-+
-+#define DMA_MAP(osh, va, size, direction, p) osl_dma_map(osh, (void*)va, size, direction)
-+#define DMA_UNMAP(osh, pa, size, direction, p) /* nop */
-+extern void* osl_dma_map(void *osh, void *va, uint size, uint direction);
-+
-+struct lbuf {
-+ struct lbuf *next; /* pointer to next lbuf on freelist */
-+ uchar *buf; /* pointer to buffer */
-+ uint len; /* nbytes of data */
-+};
++#define cache_unroll4(base, delta, op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1,0(%0); \
++ cache %1,delta(%0); \
++ cache %1,(2 * delta)(%0); \
++ cache %1,(3 * delta)(%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
+
-+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-+#define PKTBUFSZ 2048
++#endif /* !_LANGUAGE_ASSEMBLY */
+
-+/* packet primitives */
-+#define PKTGET(drv, len, send) et_pktget(drv, len, send)
-+#define PKTFREE(drv, lb, send) et_pktfree(drv, (struct lbuf*)lb, send)
-+#define PKTDATA(drv, lb) ((uchar*)OSL_UNCACHED(((struct lbuf*)lb)->buf))
-+#define PKTLEN(drv, lb) ((struct lbuf*)lb)->len
-+#define PKTHEADROOM(drv, lb) (0)
-+#define PKTTAILROOM(drv, lb) (0)
-+#define PKTNEXT(drv, lb) NULL
-+#define PKTSETNEXT(lb, x) ASSERT(0)
-+#define PKTSETLEN(drv, lb, bytes) ((struct lbuf*)lb)->len = bytes
-+#define PKTPUSH(drv, lb, bytes) ASSERT(0)
-+#define PKTPULL(drv, lb, bytes) ASSERT(0)
-+#define PKTDUP(drv, lb) ASSERT(0)
-+#define PKTLINK(lb) ((struct lbuf*)lb)->next
-+#define PKTSETLINK(lb, x) ((struct lbuf*)lb)->next = (struct lbuf*)x
-+#define PKTPRIO(lb) (0)
-+#define PKTSETPRIO(lb, x) do {} while (0)
-+extern void *et_pktget(void *drv, uint len, bool send);
-+extern void et_pktfree(void *drv, struct lbuf *lb, bool send);
-+
-+#endif /* _pmon_osl_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/802.11.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/802.11.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-12-16 23:39:10.752824750 +0100
-@@ -0,0 +1,930 @@
++#endif /* _MISPINC_H */
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h 2005-12-16 23:39:10.748824500 +0100
+@@ -0,0 +1,42 @@
+/*
++ * OS Abstraction Layer
++ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Fundamental types and constants relating to 802.11
-+ *
+ * $Id$
+ */
+
-+#ifndef _802_11_H_
-+#define _802_11_H_
-+
-+#ifndef _TYPEDEFS_H_
-+#include <typedefs.h>
-+#endif
-+
-+#ifndef _NET_ETHERNET_H_
-+#include <proto/ethernet.h>
-+#endif
-+
-+#include <proto/wpa.h>
++#ifndef _osl_h_
++#define _osl_h_
+
++/* osl handle type forward declaration */
++typedef struct os_handle osl_t;
+
-+/* enable structure packing */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
++#if defined(linux)
++#include <linux_osl.h>
++#elif defined(NDIS)
++#include <ndis_osl.h>
++#elif defined(_CFE_)
++#include <cfe_osl.h>
++#elif defined(_HNDRTE_)
++#include <hndrte_osl.h>
++#elif defined(_MINOSL_)
++#include <min_osl.h>
++#elif PMON
++#include <pmon_osl.h>
++#elif defined(MACOSX)
++#include <macosx_osl.h>
+#else
-+#pragma pack(1)
-+#define PACKED
++#error "Unsupported OSL requested"
+#endif
+
-+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */
-+
-+/* Generic 802.11 frame constants */
-+#define DOT11_A3_HDR_LEN 24
-+#define DOT11_A4_HDR_LEN 30
-+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN
-+#define DOT11_FCS_LEN 4
-+#define DOT11_ICV_LEN 4
-+#define DOT11_ICV_AES_LEN 8
-+#define DOT11_QOS_LEN 2
-+
-+#define DOT11_KEY_INDEX_SHIFT 6
-+#define DOT11_IV_LEN 4
-+#define DOT11_IV_TKIP_LEN 8
-+#define DOT11_IV_AES_OCB_LEN 4
-+#define DOT11_IV_AES_CCM_LEN 8
-+
-+/* Includes MIC */
-+#define DOT11_MAX_MPDU_BODY_LEN 2304
-+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
-+#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \
-+ DOT11_QOS_LEN + \
-+ DOT11_IV_AES_CCM_LEN + \
-+ DOT11_MAX_MPDU_BODY_LEN + \
-+ DOT11_ICV_LEN + \
-+ DOT11_FCS_LEN)
-+
-+#define DOT11_MAX_SSID_LEN 32
-+
-+/* dot11RTSThreshold */
-+#define DOT11_DEFAULT_RTS_LEN 2347
-+#define DOT11_MAX_RTS_LEN 2347
-+
-+/* dot11FragmentationThreshold */
-+#define DOT11_MIN_FRAG_LEN 256
-+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */
-+#define DOT11_DEFAULT_FRAG_LEN 2346
-+
-+/* dot11BeaconPeriod */
-+#define DOT11_MIN_BEACON_PERIOD 1
-+#define DOT11_MAX_BEACON_PERIOD 0xFFFF
-+
-+/* dot11DTIMPeriod */
-+#define DOT11_MIN_DTIM_PERIOD 1
-+#define DOT11_MAX_DTIM_PERIOD 0xFF
-+
-+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
-+#define DOT11_LLC_SNAP_HDR_LEN 8
-+#define DOT11_OUI_LEN 3
-+struct dot11_llc_snap_header {
-+ uint8 dsap; /* always 0xAA */
-+ uint8 ssap; /* always 0xAA */
-+ uint8 ctl; /* always 0x03 */
-+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
-+ Bridge-Tunnel: 0x00 0x00 0xF8 */
-+ uint16 type; /* ethertype */
-+} PACKED;
-+
-+/* RFC1042 header used by 802.11 per 802.1H */
-+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
-+
-+/* Generic 802.11 MAC header */
-+/*
-+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
-+ * The fields are defined such that the shorter 1, 2, and 3
-+ * address headers just use the first k fields.
-+ */
-+struct dot11_header {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr a1; /* address 1 */
-+ struct ether_addr a2; /* address 2 */
-+ struct ether_addr a3; /* address 3 */
-+ uint16 seq; /* sequence control */
-+ struct ether_addr a4; /* address 4 */
-+} PACKED;
-+
-+/* Control frames */
-+
-+struct dot11_rts_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+ struct ether_addr ta; /* transmitter address */
-+} PACKED;
-+#define DOT11_RTS_LEN 16
-+
-+struct dot11_cts_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+} PACKED;
-+#define DOT11_CTS_LEN 10
-+
-+struct dot11_ack_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+} PACKED;
-+#define DOT11_ACK_LEN 10
-+
-+struct dot11_ps_poll_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* AID */
-+ struct ether_addr bssid; /* receiver address, STA in AP */
-+ struct ether_addr ta; /* transmitter address */
-+} PACKED;
-+#define DOT11_PS_POLL_LEN 16
-+
-+struct dot11_cf_end_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+ struct ether_addr bssid; /* transmitter address, STA in AP */
-+} PACKED;
-+#define DOT11_CS_END_LEN 16
-+
-+/* Management frame header */
-+struct dot11_management_header {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr da; /* receiver address */
-+ struct ether_addr sa; /* transmitter address */
-+ struct ether_addr bssid; /* BSS ID */
-+ uint16 seq; /* sequence control */
-+} PACKED;
-+#define DOT11_MGMT_HDR_LEN 24
-+
-+/* Management frame payloads */
-+
-+struct dot11_bcn_prb {
-+ uint32 timestamp[2];
-+ uint16 beacon_interval;
-+ uint16 capability;
-+} PACKED;
-+#define DOT11_BCN_PRB_LEN 12
-+
-+struct dot11_auth {
-+ uint16 alg; /* algorithm */
-+ uint16 seq; /* sequence control */
-+ uint16 status; /* status code */
-+} PACKED;
-+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */
-+
-+struct dot11_assoc_req {
-+ uint16 capability; /* capability information */
-+ uint16 listen; /* listen interval */
-+} PACKED;
-+#define DOT11_ASSOC_REQ_FIXED_LEN 4 /* length of assoc frame without info elts */
-+
-+struct dot11_reassoc_req {
-+ uint16 capability; /* capability information */
-+ uint16 listen; /* listen interval */
-+ struct ether_addr ap; /* Current AP address */
-+} PACKED;
-+#define DOT11_REASSOC_REQ_FIXED_LEN 10 /* length of assoc frame without info elts */
-+
-+struct dot11_assoc_resp {
-+ uint16 capability; /* capability information */
-+ uint16 status; /* status code */
-+ uint16 aid; /* association ID */
-+} PACKED;
-+
-+struct dot11_action_measure {
-+ uint8 category;
-+ uint8 action;
-+ uint8 token;
-+ uint8 data[1];
-+} PACKED;
-+#define DOT11_ACTION_MEASURE_LEN 3
-+
-+struct dot11_action_switch_channel {
-+ uint8 category;
-+ uint8 action;
-+ uint8 data[5]; /* for switch IE */
-+} PACKED;
-+
-+/**************
-+ 802.11h related definitions.
-+**************/
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 power;
-+} dot11_power_cnst_t;
-+
-+typedef struct {
-+ uint8 min;
-+ uint8 max;
-+} dot11_power_cap_t;
-+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 tx_pwr;
-+ uint8 margin;
-+} dot11_tpc_rep_t;
-+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */
-+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 first_channel;
-+ uint8 num_channels;
-+} dot11_supp_channels_t;
-+
-+/* csa mode type */
-+#define DOT11_CSA_MODE_ADVISORY 0
-+#define DOT11_CSA_MODE_NO_TX 1
-+struct dot11_channel_switch {
-+ uint8 id;
-+ uint8 len;
-+ uint8 mode;
-+ uint8 channel;
-+ uint8 count;
-+} PACKED;
-+typedef struct dot11_channel_switch dot11_channel_switch_t;
-+
-+/* length of IE data, not including 2 byte header */
-+#define DOT11_SWITCH_IE_LEN 3
-+
-+/* 802.11h Measurement Request/Report IEs */
-+/* Measurement Type field */
-+#define DOT11_MEASURE_TYPE_BASIC 0
-+#define DOT11_MEASURE_TYPE_CCA 1
-+#define DOT11_MEASURE_TYPE_RPI 2
-+
-+/* Measurement Mode field */
-+
-+/* Measurement Request Modes */
-+#define DOT11_MEASURE_MODE_ENABLE (1<<1)
-+#define DOT11_MEASURE_MODE_REQUEST (1<<2)
-+#define DOT11_MEASURE_MODE_REPORT (1<<3)
-+/* Measurement Report Modes */
-+#define DOT11_MEASURE_MODE_LATE (1<<0)
-+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1)
-+#define DOT11_MEASURE_MODE_REFUSED (1<<2)
-+/* Basic Measurement Map bits */
-+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0))
-+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1))
-+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
-+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3))
-+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
-+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 token;
-+ uint8 mode;
-+ uint8 type;
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+} dot11_meas_req_t;
-+#define DOT11_MNG_IE_MREQ_LEN 14
-+/* length of Measure Request IE data not including variable len */
-+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
-+
-+struct dot11_meas_rep {
-+ uint8 id;
-+ uint8 len;
-+ uint8 token;
-+ uint8 mode;
-+ uint8 type;
-+ union
-+ {
-+ struct {
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+ uint8 map;
-+ } PACKED basic;
-+ uint8 data[1];
-+ } PACKED rep;
-+} PACKED;
-+typedef struct dot11_meas_rep dot11_meas_rep_t;
-+
-+/* length of Measure Report IE data not including variable len */
-+#define DOT11_MNG_IE_MREP_FIXED_LEN 3
-+
-+struct dot11_meas_rep_basic {
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+ uint8 map;
-+} PACKED;
-+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
-+#define DOT11_MEASURE_BASIC_REP_LEN 12
-+
-+struct dot11_quiet {
-+ uint8 id;
-+ uint8 len;
-+ uint8 count; /* TBTTs until beacon interval in quiet starts */
-+ uint8 period; /* Beacon intervals between periodic quiet periods ? */
-+ uint16 duration;/* Length of quiet period, in TU's */
-+ uint16 offset; /* TU's offset from TBTT in Count field */
-+} PACKED;
-+typedef struct dot11_quiet dot11_quiet_t;
-+
-+typedef struct {
-+ uint8 channel;
-+ uint8 map;
-+} chan_map_tuple_t;
-+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 eaddr[ETHER_ADDR_LEN];
-+ uint8 interval;
-+ chan_map_tuple_t map[1];
-+} dot11_ibss_dfs_t;
-+
-+/* WME Elements */
-+#define WME_OUI "\x00\x50\xf2"
-+#define WME_VER 1
-+#define WME_TYPE 2
-+#define WME_SUBTYPE_IE 0 /* Information Element */
-+#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */
-+#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */
-+
-+/* WME Access Category Indices (ACIs) */
-+#define AC_BE 0 /* Best Effort */
-+#define AC_BK 1 /* Background */
-+#define AC_VI 2 /* Video */
-+#define AC_VO 3 /* Voice */
-+#define AC_MAX 4
-+
-+/* WME Information Element (IE) */
-+struct wme_ie {
-+ uint8 oui[3];
-+ uint8 type;
-+ uint8 subtype;
-+ uint8 version;
-+ uint8 acinfo;
-+} PACKED;
-+typedef struct wme_ie wme_ie_t;
-+#define WME_IE_LEN 7
-+
-+struct wme_acparam {
-+ uint8 ACI;
-+ uint8 ECW;
-+ uint16 TXOP; /* stored in network order (ls octet first) */
-+} PACKED;
-+typedef struct wme_acparam wme_acparam_t;
-+
-+/* WME Parameter Element (PE) */
-+struct wme_params {
-+ uint8 oui[3];
-+ uint8 type;
-+ uint8 subtype;
-+ uint8 version;
-+ uint8 acinfo;
-+ uint8 rsvd;
-+ wme_acparam_t acparam[4];
-+} PACKED;
-+typedef struct wme_params wme_params_t;
-+#define WME_PARAMS_IE_LEN 24
-+
-+/* acinfo */
-+#define WME_COUNT_MASK 0x0f
-+/* ACI */
-+#define WME_AIFS_MASK 0x0f
-+#define WME_ACM_MASK 0x10
-+#define WME_ACI_MASK 0x60
-+#define WME_ACI_SHIFT 5
-+/* ECW */
-+#define WME_CWMIN_MASK 0x0f
-+#define WME_CWMAX_MASK 0xf0
-+#define WME_CWMAX_SHIFT 4
-+
-+#define WME_TXOP_UNITS 32
-+
-+/* AP: default params to be announced in the Beacon Frames/Probe Responses Table 12 WME Draft*/
-+/* AP: default params to be Used in the AP Side Table 14 WME Draft January 2004 802.11-03-504r5 */
-+#define WME_AC_BK_ACI_STA 0x27
-+#define WME_AC_BK_ECW_STA 0xA4
-+#define WME_AC_BK_TXOP_STA 0x0000
-+#define WME_AC_BE_ACI_STA 0x03
-+#define WME_AC_BE_ECW_STA 0xA4
-+#define WME_AC_BE_TXOP_STA 0x0000
-+#define WME_AC_VI_ACI_STA 0x42
-+#define WME_AC_VI_ECW_STA 0x43
-+#define WME_AC_VI_TXOP_STA 0x005e
-+#define WME_AC_VO_ACI_STA 0x62
-+#define WME_AC_VO_ECW_STA 0x32
-+#define WME_AC_VO_TXOP_STA 0x002f
-+
-+#define WME_AC_BK_ACI_AP 0x27
-+#define WME_AC_BK_ECW_AP 0xA4
-+#define WME_AC_BK_TXOP_AP 0x0000
-+#define WME_AC_BE_ACI_AP 0x03
-+#define WME_AC_BE_ECW_AP 0x64
-+#define WME_AC_BE_TXOP_AP 0x0000
-+#define WME_AC_VI_ACI_AP 0x41
-+#define WME_AC_VI_ECW_AP 0x43
-+#define WME_AC_VI_TXOP_AP 0x005e
-+#define WME_AC_VO_ACI_AP 0x61
-+#define WME_AC_VO_ECW_AP 0x32
-+#define WME_AC_VO_TXOP_AP 0x002f
-+
-+/* WME Traffic Specification (TSPEC) element */
-+#define WME_SUBTYPE_TSPEC 2
-+#define WME_TSPEC_HDR_LEN 2
-+#define WME_TSPEC_BODY_OFF 2
-+struct wme_tspec {
-+ uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */
-+ uint8 type; /* WME_TYPE */
-+ uint8 subtype; /* WME_SUBTYPE_TSPEC */
-+ uint8 version; /* WME_VERSION */
-+ uint16 ts_info; /* TS Info */
-+ uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
-+ uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
-+ uint32 min_service_interval; /* Minimum Service Interval (us) */
-+ uint32 max_service_interval; /* Maximum Service Interval (us) */
-+ uint32 inactivity_interval; /* Inactivity Interval (us) */
-+ uint32 service_start; /* Service Start Time (us) */
-+ uint32 min_rate; /* Minimum Data Rate (bps) */
-+ uint32 mean_rate; /* Mean Data Rate (bps) */
-+ uint32 max_burst_size; /* Maximum Burst Size (bytes) */
-+ uint32 min_phy_rate; /* Minimum PHY Rate (bps) */
-+ uint32 peak_rate; /* Peak Data Rate (bps) */
-+ uint32 delay_bound; /* Delay Bound (us) */
-+ uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */
-+ uint16 medium_time; /* Medium Time (32 us/s periods) */
-+} PACKED;
-+typedef struct wme_tspec wme_tspec_t;
-+#define WME_TSPEC_LEN 56 /* not including 2-byte header */
-+
-+/* ts_info */
-+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
-+#define TS_INFO_PRIO_SHIFT_HI 11
-+#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI)
-+#define TS_INFO_PRIO_SHIFT_LO 1
-+#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO)
-+#define TS_INFO_CONTENTION_SHIFT 7
-+#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT)
-+#define TS_INFO_DIRECTION_SHIFT 5
-+#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT)
-+#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT)
-+#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT)
-+#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT)
-+
-+/* nom_msdu_size */
-+#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */
-+#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */
-+
-+/* surplus_bandwidth */
-+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
-+#define INTEGER_SHIFT 13
-+#define FRACTION_MASK 0x1FFF
-+
-+/* Management Notification Frame */
-+struct dot11_management_notification {
-+ uint8 category; /* DOT11_ACTION_NOTIFICATION */
-+ uint8 action;
-+ uint8 token;
-+ uint8 status;
-+ uint8 data[1]; /* Elements */
-+} PACKED;
-+#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */
-+
-+/* WME Action Codes */
-+#define WME_SETUP_REQUEST 0
-+#define WME_SETUP_RESPONSE 1
-+#define WME_TEARDOWN 2
-+
-+/* WME Setup Response Status Codes */
-+#define WME_ADMISSION_ACCEPTED 0
-+#define WME_INVALID_PARAMETERS 1
-+#define WME_ADMISSION_REFUSED 3
-+
-+/* Macro to take a pointer to a beacon or probe response
-+ * header and return the char* pointer to the SSID info element
-+ */
-+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
-+
-+/* Authentication frame payload constants */
-+#define DOT11_OPEN_SYSTEM 0
-+#define DOT11_SHARED_KEY 1
-+#define DOT11_CHALLENGE_LEN 128
-+
-+/* Frame control macros */
-+#define FC_PVER_MASK 0x3
-+#define FC_PVER_SHIFT 0
-+#define FC_TYPE_MASK 0xC
-+#define FC_TYPE_SHIFT 2
-+#define FC_SUBTYPE_MASK 0xF0
-+#define FC_SUBTYPE_SHIFT 4
-+#define FC_TODS 0x100
-+#define FC_TODS_SHIFT 8
-+#define FC_FROMDS 0x200
-+#define FC_FROMDS_SHIFT 9
-+#define FC_MOREFRAG 0x400
-+#define FC_MOREFRAG_SHIFT 10
-+#define FC_RETRY 0x800
-+#define FC_RETRY_SHIFT 11
-+#define FC_PM 0x1000
-+#define FC_PM_SHIFT 12
-+#define FC_MOREDATA 0x2000
-+#define FC_MOREDATA_SHIFT 13
-+#define FC_WEP 0x4000
-+#define FC_WEP_SHIFT 14
-+#define FC_ORDER 0x8000
-+#define FC_ORDER_SHIFT 15
-+
-+/* sequence control macros */
-+#define SEQNUM_SHIFT 4
-+#define FRAGNUM_MASK 0xF
-+
-+/* Frame Control type/subtype defs */
-+
-+/* FC Types */
-+#define FC_TYPE_MNG 0
-+#define FC_TYPE_CTL 1
-+#define FC_TYPE_DATA 2
-+
-+/* Management Subtypes */
-+#define FC_SUBTYPE_ASSOC_REQ 0
-+#define FC_SUBTYPE_ASSOC_RESP 1
-+#define FC_SUBTYPE_REASSOC_REQ 2
-+#define FC_SUBTYPE_REASSOC_RESP 3
-+#define FC_SUBTYPE_PROBE_REQ 4
-+#define FC_SUBTYPE_PROBE_RESP 5
-+#define FC_SUBTYPE_BEACON 8
-+#define FC_SUBTYPE_ATIM 9
-+#define FC_SUBTYPE_DISASSOC 10
-+#define FC_SUBTYPE_AUTH 11
-+#define FC_SUBTYPE_DEAUTH 12
-+#define FC_SUBTYPE_ACTION 13
-+
-+/* Control Subtypes */
-+#define FC_SUBTYPE_PS_POLL 10
-+#define FC_SUBTYPE_RTS 11
-+#define FC_SUBTYPE_CTS 12
-+#define FC_SUBTYPE_ACK 13
-+#define FC_SUBTYPE_CF_END 14
-+#define FC_SUBTYPE_CF_END_ACK 15
-+
-+/* Data Subtypes */
-+#define FC_SUBTYPE_DATA 0
-+#define FC_SUBTYPE_DATA_CF_ACK 1
-+#define FC_SUBTYPE_DATA_CF_POLL 2
-+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3
-+#define FC_SUBTYPE_NULL 4
-+#define FC_SUBTYPE_CF_ACK 5
-+#define FC_SUBTYPE_CF_POLL 6
-+#define FC_SUBTYPE_CF_ACK_POLL 7
-+#define FC_SUBTYPE_QOS_DATA 8
-+#define FC_SUBTYPE_QOS_NULL 12
-+
-+/* type-subtype combos */
-+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK)
-+
-+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
-+
-+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
-+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
-+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
-+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
-+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
-+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
-+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
-+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
-+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
-+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
-+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
-+
-+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
-+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
-+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
-+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
-+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
-+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
-+
-+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
-+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
-+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
-+#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
-+#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
-+
-+/* QoS Control Field */
-+
-+/* 802.1D Tag */
-+#define QOS_PRIO_SHIFT 0
-+#define QOS_PRIO_MASK 0x0007
-+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
-+
-+#define QOS_TID_SHIFT 0
-+#define QOS_TID_MASK 0x000f
-+#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)
-+
-+/* Ack Policy (0 means Acknowledge) */
-+#define QOS_ACK_SHIFT 5
-+#define QOS_ACK_MASK 0x0060
-+#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
-+
-+/* Management Frames */
-+
-+/* Management Frame Constants */
-+
-+/* Fixed fields */
-+#define DOT11_MNG_AUTH_ALGO_LEN 2
-+#define DOT11_MNG_AUTH_SEQ_LEN 2
-+#define DOT11_MNG_BEACON_INT_LEN 2
-+#define DOT11_MNG_CAP_LEN 2
-+#define DOT11_MNG_AP_ADDR_LEN 6
-+#define DOT11_MNG_LISTEN_INT_LEN 2
-+#define DOT11_MNG_REASON_LEN 2
-+#define DOT11_MNG_AID_LEN 2
-+#define DOT11_MNG_STATUS_LEN 2
-+#define DOT11_MNG_TIMESTAMP_LEN 8
-+
-+/* DUR/ID field in assoc resp is 0xc000 | AID */
-+#define DOT11_AID_MASK 0x3fff
-+
-+/* Reason Codes */
-+#define DOT11_RC_RESERVED 0
-+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */
-+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */
-+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is
-+ leaving (or has left) IBSS or ESS */
-+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */
-+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle
-+ all currently associated stations */
-+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from
-+ nonauthenticated station */
-+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from
-+ nonassociated station */
-+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is
-+ leaving (or has left) BSS */
-+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is
-+ not authenticated with responding station */
-+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */
-+
-+/* Status Codes */
-+#define DOT11_STATUS_SUCCESS 0 /* Successful */
-+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */
-+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities
-+ in the Capability Information field */
-+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to
-+ confirm that association exists */
-+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside
-+ the scope of this standard */
-+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the
-+ specified authentication algorithm */
-+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with
-+ authentication transaction sequence number
-+ out of expected sequence */
-+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */
-+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting
-+ for next frame in sequence */
-+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to
-+ handle additional associated stations */
-+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station
-+ not supporting all of the data rates in the
-+ BSSBasicRateSet parameter */
-+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station
-+ not supporting the Short Preamble option */
-+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station
-+ not supporting the PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station
-+ not supporting the Channel Agility option */
-+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management
-+ capability is required. */
-+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the
-+ Power Cap element is unacceptable. */
-+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the
-+ Supported Channel element is unacceptable */
-+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station
-+ not supporting the Short Slot Time option */
-+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station
-+ not supporting the ER-PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station
-+ not supporting the DSS-OFDM option */
-+
-+/* Info Elts, length of INFORMATION portion of Info Elts */
-+#define DOT11_MNG_DS_PARAM_LEN 1
-+#define DOT11_MNG_IBSS_PARAM_LEN 2
-+
-+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
-+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
-+#define DOT11_MNG_TIM_FIXED_LEN 3
-+#define DOT11_MNG_TIM_DTIM_COUNT 0
-+#define DOT11_MNG_TIM_DTIM_PERIOD 1
-+#define DOT11_MNG_TIM_BITMAP_CTL 2
-+#define DOT11_MNG_TIM_PVB 3
-+
-+/* TLV defines */
-+#define TLV_TAG_OFF 0
-+#define TLV_LEN_OFF 1
-+#define TLV_HDR_LEN 2
-+#define TLV_BODY_OFF 2
-+
-+/* Management Frame Information Element IDs */
-+#define DOT11_MNG_SSID_ID 0
-+#define DOT11_MNG_RATES_ID 1
-+#define DOT11_MNG_FH_PARMS_ID 2
-+#define DOT11_MNG_DS_PARMS_ID 3
-+#define DOT11_MNG_CF_PARMS_ID 4
-+#define DOT11_MNG_TIM_ID 5
-+#define DOT11_MNG_IBSS_PARMS_ID 6
-+#define DOT11_MNG_COUNTRY_ID 7
-+#define DOT11_MNG_HOPPING_PARMS_ID 8
-+#define DOT11_MNG_HOPPING_TABLE_ID 9
-+#define DOT11_MNG_REQUEST_ID 10
-+#define DOT11_MNG_CHALLENGE_ID 16
-+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */
-+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */
-+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */
-+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */
-+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */
-+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/
-+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */
-+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */
-+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */
-+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
-+#define DOT11_MNG_ERP_ID 42
-+#define DOT11_MNG_NONERP_ID 47
-+#ifdef BCMWPA2
-+#define DOT11_MNG_RSN_ID 48
-+#endif /* BCMWPA2 */
-+#define DOT11_MNG_EXT_RATES_ID 50
-+#define DOT11_MNG_WPA_ID 221
-+#define DOT11_MNG_PROPR_ID 221
-+
-+/* ERP info element bit values */
-+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */
-+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */
-+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */
-+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */
-+
-+/* Capability Information Field */
-+#define DOT11_CAP_ESS 0x0001
-+#define DOT11_CAP_IBSS 0x0002
-+#define DOT11_CAP_POLLABLE 0x0004
-+#define DOT11_CAP_POLL_RQ 0x0008
-+#define DOT11_CAP_PRIVACY 0x0010
-+#define DOT11_CAP_SHORT 0x0020
-+#define DOT11_CAP_PBCC 0x0040
-+#define DOT11_CAP_AGILITY 0x0080
-+#define DOT11_CAP_SPECTRUM 0x0100
-+#define DOT11_CAP_SHORTSLOT 0x0400
-+#define DOT11_CAP_CCK_OFDM 0x2000
-+
-+/* Action Frame Constants */
-+#define DOT11_ACTION_CAT_ERR_MASK 0x80
-+#define DOT11_ACTION_CAT_SPECT_MNG 0x00
-+#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */
-+
-+#define DOT11_ACTION_ID_M_REQ 0
-+#define DOT11_ACTION_ID_M_REP 1
-+#define DOT11_ACTION_ID_TPC_REQ 2
-+#define DOT11_ACTION_ID_TPC_REP 3
-+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
-+
-+/* MLME Enumerations */
-+#define DOT11_BSSTYPE_INFRASTRUCTURE 0
-+#define DOT11_BSSTYPE_INDEPENDENT 1
-+#define DOT11_BSSTYPE_ANY 2
-+#define DOT11_SCANTYPE_ACTIVE 0
-+#define DOT11_SCANTYPE_PASSIVE 1
-+
-+/* 802.11 A PHY constants */
-+#define APHY_SLOT_TIME 9
-+#define APHY_SIFS_TIME 16
-+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
-+#define APHY_PREAMBLE_TIME 16
-+#define APHY_SIGNAL_TIME 4
-+#define APHY_SYMBOL_TIME 4
-+#define APHY_SERVICE_NBITS 16
-+#define APHY_TAIL_NBITS 6
-+#define APHY_CWMIN 15
-+
-+/* 802.11 B PHY constants */
-+#define BPHY_SLOT_TIME 20
-+#define BPHY_SIFS_TIME 10
-+#define BPHY_DIFS_TIME 50
-+#define BPHY_PLCP_TIME 192
-+#define BPHY_PLCP_SHORT_TIME 96
-+#define BPHY_CWMIN 31
-+
-+/* 802.11 G constants */
-+#define DOT11_OFDM_SIGNAL_EXTENSION 6
-+
-+#define PHY_CWMAX 1023
-+
-+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */
-+
-+/* dot11Counters Table - 802.11 spec., Annex D */
-+typedef struct d11cnt {
-+ uint32 txfrag; /* dot11TransmittedFragmentCount */
-+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
-+ uint32 txfail; /* dot11FailedCount */
-+ uint32 txretry; /* dot11RetryCount */
-+ uint32 txretrie; /* dot11MultipleRetryCount */
-+ uint32 rxdup; /* dot11FrameduplicateCount */
-+ uint32 txrts; /* dot11RTSSuccessCount */
-+ uint32 txnocts; /* dot11RTSFailureCount */
-+ uint32 txnoack; /* dot11ACKFailureCount */
-+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
-+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
-+ uint32 rxcrc; /* dot11FCSErrorCount */
-+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */
-+ uint32 rxundec; /* dot11WEPUndecryptableCount */
-+} d11cnt_t;
-+
-+/* BRCM OUI */
-+#define BRCM_OUI "\x00\x10\x18"
-+
-+/* BRCM info element */
-+struct brcm_ie {
-+ uchar id; /* 221, DOT11_MNG_PROPR_ID */
-+ uchar len;
-+ uchar oui[3];
-+ uchar ver;
-+ uchar assoc; /* # of assoc STAs */
-+ uchar flags; /* misc flags */
-+} PACKED;
-+#define BRCM_IE_LEN 8
-+typedef struct brcm_ie brcm_ie_t;
-+#define BRCM_IE_VER 2
-+#define BRCM_IE_LEGACY_AES_VER 1
-+
-+/* brcm_ie flags */
-+#define BRF_ABCAP 0x1 /* afterburner capable */
-+#define BRF_ABRQRD 0x2 /* afterburner requested */
-+#define BRF_LZWDS 0x4 /* lazy wds enabled */
-+#define BRF_ABCOUNTER_MASK 0xf0 /* afterburner wds "state" counter */
-+#define BRF_ABCOUNTER_SHIFT 4
-+
-+#define AB_WDS_TIMEOUT_MAX 15 /* afterburner wds Max count indicating not locally capable */
-+#define AB_WDS_TIMEOUT_MIN 1 /* afterburner wds, use zero count as indicating "downrev" */
-+
-+
-+/* OUI for BRCM proprietary IE */
-+#define BRCM_PROP_OUI "\x00\x90\x4C"
-+
-+/* Vendor IE structure */
-+struct vndr_ie {
-+ uchar id;
-+ uchar len;
-+ uchar oui [3];
-+ uchar data [1]; /* Variable size data */
-+}PACKED;
-+typedef struct vndr_ie vndr_ie_t;
-+
-+#define VNDR_IE_HDR_LEN 2 /* id + len field */
-+#define VNDR_IE_MIN_LEN 3 /* size of the oui field */
-+#define VNDR_IE_MAX_LEN 256
-+
-+/* WPA definitions */
-+#define WPA_VERSION 1
-+#define WPA_OUI "\x00\x50\xF2"
-+
-+#ifdef BCMWPA2
-+#define WPA2_VERSION 1
-+#define WPA2_VERSION_LEN 2
-+#define WPA2_OUI "\x00\x0F\xAC"
-+#endif /* BCMWPA2 */
-+
-+#define WPA_OUI_LEN 3
-+
-+/* RSN authenticated key managment suite */
-+#define RSN_AKM_NONE 0 /* None (IBSS) */
-+#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */
-+#define RSN_AKM_PSK 2 /* Pre-shared Key */
-+
-+
-+/* Key related defines */
-+#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */
-+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */
-+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */
-+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
-+
-+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */
-+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
-+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */
-+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
-+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */
-+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
-+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
-+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */
-+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
-+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
-+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
-+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
-+#define AES_KEY_SIZE 16 /* size of AES key */
-+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
++/* handy */
++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
++#define MAXPRIO 7 /* 0-7 */
+
-+#endif /* _802_11_H_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmeth.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmeth.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h 2005-12-16 23:39:10.756825000 +0100
-@@ -0,0 +1,103 @@
++#endif /* _osl_h_ */
+diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h
+--- linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-12-16 23:39:10.752824750 +0100
+@@ -0,0 +1,451 @@
+/*
-+ * Broadcom Ethernettype protocol definitions
++ * pcicfg.h: PCI configuration constants and structures.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
++ * $Id$
+ */
+
-+/*
-+ * Broadcom Ethernet protocol defines
-+ *
-+ */
-+
-+#ifndef _BCMETH_H_
-+#define _BCMETH_H_
++#ifndef _h_pci_
++#define _h_pci_
+
-+/* enable structure packing */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#pragma pack(1)
-+#define PACKED
++/* The following inside ifndef's so we don't collide with NTDDK.H */
++#ifndef PCI_MAX_BUS
++#define PCI_MAX_BUS 0x100
+#endif
-+
-+/* ETHER_TYPE_BRCM is defined in ethernet.h */
-+
-+/*
-+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
-+ * in one of two formats: (only subtypes 32768-65535 are in use now)
-+ *
-+ * subtypes 0-32767:
-+ * 8 bit subtype (0-127)
-+ * 8 bit length in bytes (0-255)
-+ *
-+ * subtypes 32768-65535:
-+ * 16 bit big-endian subtype
-+ * 16 bit big-endian length in bytes (0-65535)
-+ *
-+ * length is the number of additional bytes beyond the 4 or 6 byte header
-+ *
-+ * Reserved values:
-+ * 0 reserved
-+ * 5-15 reserved for iLine protocol assignments
-+ * 17-126 reserved, assignable
-+ * 127 reserved
-+ * 32768 reserved
-+ * 32769-65534 reserved, assignable
-+ * 65535 reserved
-+ */
-+
-+/*
-+ * While adding the subtypes and their specific processing code make sure
-+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
-+ */
-+
-+#define BCMILCP_SUBTYPE_RATE 1
-+#define BCMILCP_SUBTYPE_LINK 2
-+#define BCMILCP_SUBTYPE_CSA 3
-+#define BCMILCP_SUBTYPE_LARQ 4
-+#define BCMILCP_SUBTYPE_VENDOR 5
-+#define BCMILCP_SUBTYPE_FLH 17
-+
-+#define BCMILCP_SUBTYPE_VENDOR_LONG 32769
-+#define BCMILCP_SUBTYPE_CERT 32770
-+#define BCMILCP_SUBTYPE_SES 32771
-+
-+
-+#define BCMILCP_BCM_SUBTYPE_RESERVED 0
-+#define BCMILCP_BCM_SUBTYPE_EVENT 1
-+#define BCMILCP_BCM_SUBTYPE_SES 2
-+/*
-+The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
-+within BCMILCP_BCM_SUBTYPE_EVENT type messages
-+*/
-+/*#define BCMILCP_BCM_SUBTYPE_EAPOL 3*/
-+
-+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8
-+#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0
-+
-+/* These fields are stored in network order */
-+typedef struct bcmeth_hdr
-+{
-+ uint16 subtype; /* Vendor specific..32769*/
-+ uint16 length;
-+ uint8 version; /* Version is 0*/
-+ uint8 oui[3]; /* Broadcom OUI*/
-+ /* user specific Data */
-+ uint16 usr_subtype;
-+} PACKED bcmeth_hdr_t;
-+
-+
-+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
++#ifndef PCI_MAX_DEVICES
++#define PCI_MAX_DEVICES 0x20
+#endif
-+
++#ifndef PCI_MAX_FUNCTION
++#define PCI_MAX_FUNCTION 0x8
+#endif
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmip.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmip.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmip.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmip.h 2005-12-16 23:39:10.756825000 +0100
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
-+ * the contents of this file may not be disclosed to third parties, copied
-+ * or duplicated in any form, in whole or in part, without the prior
-+ * written permission of Broadcom Corporation.
-+ *
-+ * Fundamental constants relating to IP Protocol
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _bcmip_h_
-+#define _bcmip_h_
-+
-+/* IP header */
-+#define IPV4_VERIHL_OFFSET 0 /* version and ihl byte offset */
-+#define IPV4_TOS_OFFSET 1 /* TOS offset */
-+#define IPV4_PROT_OFFSET 9 /* protocol type offset */
-+#define IPV4_CHKSUM_OFFSET 10 /* IP header checksum offset */
-+#define IPV4_SRC_IP_OFFSET 12 /* src IP addr offset */
-+#define IPV4_DEST_IP_OFFSET 16 /* dest IP addr offset */
-+
-+#define IPV4_VER_MASK 0xf0
-+#define IPV4_IHL_MASK 0x0f
+
-+#define IPV4_PROT_UDP 17 /* UDP protocol type */
-+
-+#define IPV4_ADDR_LEN 4 /* IP v4 address length */
++#ifndef PCI_INVALID_VENDORID
++#define PCI_INVALID_VENDORID 0xffff
++#endif
++#ifndef PCI_INVALID_DEVICEID
++#define PCI_INVALID_DEVICEID 0xffff
++#endif
+
-+#define IPV4_VER_NUM 0x40 /* IP v4 version number */
+
-+/* NULL IP address check */
-+#define IPV4_ISNULLADDR(a) ((((uint8 *)(a))[0] + ((uint8 *)(a))[1] + \
-+ ((uint8 *)(a))[2] + ((uint8 *)(a))[3]) == 0)
++/* Convert between bus-slot-function-register and config addresses */
+
-+#define IPV4_ADDR_STR_LEN 16
++#define PCICFG_BUS_SHIFT 16 /* Bus shift */
++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
++#define PCICFG_FUN_SHIFT 8 /* Function shift */
++#define PCICFG_OFF_SHIFT 0 /* Register shift */
+
-+#endif /* #ifndef _bcmip_h_ */
++#define PCICFG_BUS_MASK 0xff /* Bus mask */
++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
++#define PCICFG_FUN_MASK 7 /* Function mask */
++#define PCICFG_OFF_MASK 0xff /* Bus mask */
+
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-12-16 23:39:10.756825000 +0100
-@@ -0,0 +1,169 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
-+ ******************************************************************************/
++#define PCI_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
+
-+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
-+#define _NET_ETHERNET_H_
++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
+
-+#ifndef _TYPEDEFS_H_
-+#include "typedefs.h"
-+#endif
++/* PCIE Config space accessing MACROS*/
+
-+/* enable structure packing */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#pragma pack(1)
-+#define PACKED
-+#endif
++#define PCIECFG_BUS_SHIFT 24 /* Bus shift */
++#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */
++#define PCIECFG_FUN_SHIFT 16 /* Function shift */
++#define PCIECFG_OFF_SHIFT 0 /* Register shift */
+
-+/*
-+ * The number of bytes in an ethernet (MAC) address.
-+ */
-+#define ETHER_ADDR_LEN 6
++#define PCIECFG_BUS_MASK 0xff /* Bus mask */
++#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */
++#define PCIECFG_FUN_MASK 7 /* Function mask */
++#define PCIECFG_OFF_MASK 0x3ff /* Register mask */
+
-+/*
-+ * The number of bytes in the type field.
-+ */
-+#define ETHER_TYPE_LEN 2
++#define PCIE_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \
++ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \
++ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \
++ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
+
-+/*
-+ * The number of bytes in the trailing CRC field.
-+ */
-+#define ETHER_CRC_LEN 4
++#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
++#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
++#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
++#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
+
-+/*
-+ * The length of the combined header.
-+ */
-+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
++
++/* The actual config space */
+
-+/*
-+ * The minimum packet length.
-+ */
-+#define ETHER_MIN_LEN 64
++#define PCI_BAR_MAX 6
+
-+/*
-+ * The minimum packet user data length.
-+ */
-+#define ETHER_MIN_DATA 46
++#define PCI_ROM_BAR 8
+
-+/*
-+ * The maximum packet length.
-+ */
-+#define ETHER_MAX_LEN 1518
++#define PCR_RSVDA_MAX 2
+
-+/*
-+ * The maximum packet user data length.
-+ */
-+#define ETHER_MAX_DATA 1500
++/* pci config status reg has a bit to indicate that capability ptr is present*/
+
-+/* ether types */
-+#define ETHER_TYPE_IP 0x0800 /* IP */
-+#define ETHER_TYPE_ARP 0x0806 /* ARP */
-+#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */
-+#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */
-+#define ETHER_TYPE_802_1X 0x888e /* 802.1x */
-+#define ETHER_TYPE_802_1X_PREAUTH 0x88c7 /* 802.1x preauthentication*/
++#define PCI_CAPPTR_PRESENT 0x0010
+
-+/* Broadcom subtype follows ethertype; First 2 bytes are reserved; Next 2 are subtype; */
-+#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4 byte subtype */
-+#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */
++typedef struct _pci_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long base[PCI_BAR_MAX];
++ unsigned long cardbus_cis;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long baserom;
++ unsigned long rsvd_a[PCR_RSVDA_MAX];
++ unsigned char int_line;
++ unsigned char int_pin;
++ unsigned char min_gnt;
++ unsigned char max_lat;
++ unsigned char dev_dep[192];
++} pci_config_regs;
+
-+/* ether header */
-+#define ETHER_DEST_OFFSET 0 /* dest address offset */
-+#define ETHER_SRC_OFFSET 6 /* src address offset */
-+#define ETHER_TYPE_OFFSET 12 /* ether type offset */
++#define SZPCR (sizeof (pci_config_regs))
++#define MINSZPCR 64 /* offsetof (dev_dep[0] */
+
-+/*
-+ * A macro to validate a length with
++/* A structure for the config registers is nice, but in most
++ * systems the config space is not memory mapped, so we need
++ * filed offsetts. :-(
+ */
-+#define ETHER_IS_VALID_LEN(foo) \
-+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
++#define PCI_CFG_VID 0
++#define PCI_CFG_DID 2
++#define PCI_CFG_CMD 4
++#define PCI_CFG_STAT 6
++#define PCI_CFG_REV 8
++#define PCI_CFG_PROGIF 9
++#define PCI_CFG_SUBCL 0xa
++#define PCI_CFG_BASECL 0xb
++#define PCI_CFG_CLSZ 0xc
++#define PCI_CFG_LATTIM 0xd
++#define PCI_CFG_HDR 0xe
++#define PCI_CFG_BIST 0xf
++#define PCI_CFG_BAR0 0x10
++#define PCI_CFG_BAR1 0x14
++#define PCI_CFG_BAR2 0x18
++#define PCI_CFG_BAR3 0x1c
++#define PCI_CFG_BAR4 0x20
++#define PCI_CFG_BAR5 0x24
++#define PCI_CFG_CIS 0x28
++#define PCI_CFG_SVID 0x2c
++#define PCI_CFG_SSID 0x2e
++#define PCI_CFG_ROMBAR 0x30
++#define PCI_CFG_CAPPTR 0x34
++#define PCI_CFG_INT 0x3c
++#define PCI_CFG_PIN 0x3d
++#define PCI_CFG_MINGNT 0x3e
++#define PCI_CFG_MAXLAT 0x3f
+
++/* Classes and subclasses */
+
-+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
-+/*
-+ * Structure of a 10Mb/s Ethernet header.
-+ */
-+struct ether_header {
-+ uint8 ether_dhost[ETHER_ADDR_LEN];
-+ uint8 ether_shost[ETHER_ADDR_LEN];
-+ uint16 ether_type;
-+} PACKED;
++typedef enum {
++ PCI_CLASS_OLD = 0,
++ PCI_CLASS_DASDI,
++ PCI_CLASS_NET,
++ PCI_CLASS_DISPLAY,
++ PCI_CLASS_MMEDIA,
++ PCI_CLASS_MEMORY,
++ PCI_CLASS_BRIDGE,
++ PCI_CLASS_COMM,
++ PCI_CLASS_BASE,
++ PCI_CLASS_INPUT,
++ PCI_CLASS_DOCK,
++ PCI_CLASS_CPU,
++ PCI_CLASS_SERIAL,
++ PCI_CLASS_INTELLIGENT = 0xe,
++ PCI_CLASS_SATELLITE,
++ PCI_CLASS_CRYPT,
++ PCI_CLASS_DSP,
++ PCI_CLASS_MAX
++} pci_classes;
+
-+/*
-+ * Structure of a 48-bit Ethernet address.
-+ */
-+struct ether_addr {
-+ uint8 octet[ETHER_ADDR_LEN];
-+} PACKED;
-+#endif
++typedef enum {
++ PCI_DASDI_SCSI,
++ PCI_DASDI_IDE,
++ PCI_DASDI_FLOPPY,
++ PCI_DASDI_IPI,
++ PCI_DASDI_RAID,
++ PCI_DASDI_OTHER = 0x80
++} pci_dasdi_subclasses;
+
-+/*
-+ * Takes a pointer, sets locally admininistered
-+ * address bit in the 48-bit Ethernet address.
-+ */
-+#define ETHER_SET_LOCALADDR(ea) ( ((uint8 *)(ea))[0] = \
-+ (((uint8 *)(ea))[0] | 2) )
++typedef enum {
++ PCI_NET_ETHER,
++ PCI_NET_TOKEN,
++ PCI_NET_FDDI,
++ PCI_NET_ATM,
++ PCI_NET_OTHER = 0x80
++} pci_net_subclasses;
+
-+/*
-+ * Takes a pointer, returns true if a 48-bit multicast address
-+ * (including broadcast, since it is all ones)
-+ */
-+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
++typedef enum {
++ PCI_DISPLAY_VGA,
++ PCI_DISPLAY_XGA,
++ PCI_DISPLAY_3D,
++ PCI_DISPLAY_OTHER = 0x80
++} pci_display_subclasses;
+
++typedef enum {
++ PCI_MMEDIA_VIDEO,
++ PCI_MMEDIA_AUDIO,
++ PCI_MMEDIA_PHONE,
++ PCI_MEDIA_OTHER = 0x80
++} pci_mmedia_subclasses;
+
-+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
-+#define ether_cmp(a, b) ( \
-+ !(((short*)a)[0] == ((short*)b)[0]) | \
-+ !(((short*)a)[1] == ((short*)b)[1]) | \
-+ !(((short*)a)[2] == ((short*)b)[2]))
++typedef enum {
++ PCI_MEMORY_RAM,
++ PCI_MEMORY_FLASH,
++ PCI_MEMORY_OTHER = 0x80
++} pci_memory_subclasses;
+
-+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
-+#define ether_copy(s, d) { \
-+ ((short*)d)[0] = ((short*)s)[0]; \
-+ ((short*)d)[1] = ((short*)s)[1]; \
-+ ((short*)d)[2] = ((short*)s)[2]; }
++typedef enum {
++ PCI_BRIDGE_HOST,
++ PCI_BRIDGE_ISA,
++ PCI_BRIDGE_EISA,
++ PCI_BRIDGE_MC,
++ PCI_BRIDGE_PCI,
++ PCI_BRIDGE_PCMCIA,
++ PCI_BRIDGE_NUBUS,
++ PCI_BRIDGE_CARDBUS,
++ PCI_BRIDGE_RACEWAY,
++ PCI_BRIDGE_OTHER = 0x80
++} pci_bridge_subclasses;
+
-+/*
-+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
-+ */
-+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
-+ ((uint8 *)(ea))[1] & \
-+ ((uint8 *)(ea))[2] & \
-+ ((uint8 *)(ea))[3] & \
-+ ((uint8 *)(ea))[4] & \
-+ ((uint8 *)(ea))[5]) == 0xff)
++typedef enum {
++ PCI_COMM_UART,
++ PCI_COMM_PARALLEL,
++ PCI_COMM_MULTIUART,
++ PCI_COMM_MODEM,
++ PCI_COMM_OTHER = 0x80
++} pci_comm_subclasses;
+
-+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
++typedef enum {
++ PCI_BASE_PIC,
++ PCI_BASE_DMA,
++ PCI_BASE_TIMER,
++ PCI_BASE_RTC,
++ PCI_BASE_PCI_HOTPLUG,
++ PCI_BASE_OTHER = 0x80
++} pci_base_subclasses;
+
-+/*
-+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
-+ */
-+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
-+ ((uint8 *)(ea))[1] | \
-+ ((uint8 *)(ea))[2] | \
-+ ((uint8 *)(ea))[3] | \
-+ ((uint8 *)(ea))[4] | \
-+ ((uint8 *)(ea))[5]) == 0)
-+
-+/* Differentiated Services Codepoint - upper 6 bits of tos in iphdr */
-+#define DSCP_MASK 0xFC /* upper 6 bits */
-+#define DSCP_SHIFT 2
-+#define DSCP_WME_PRI_MASK 0xE0 /* upper 3 bits */
-+#define DSCP_WME_PRI_SHIFT 5
-+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
++typedef enum {
++ PCI_INPUT_KBD,
++ PCI_INPUT_PEN,
++ PCI_INPUT_MOUSE,
++ PCI_INPUT_SCANNER,
++ PCI_INPUT_GAMEPORT,
++ PCI_INPUT_OTHER = 0x80
++} pci_input_subclasses;
+
-+#endif /* _NET_ETHERNET_H_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/vlan.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/vlan.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/vlan.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/vlan.h 2005-12-16 23:39:10.756825000 +0100
-@@ -0,0 +1,50 @@
-+/*
-+ * 802.1Q VLAN protocol definitions
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++typedef enum {
++ PCI_DOCK_GENERIC,
++ PCI_DOCK_OTHER = 0x80
++} pci_dock_subclasses;
+
-+#ifndef _vlan_h_
-+#define _vlan_h_
++typedef enum {
++ PCI_CPU_386,
++ PCI_CPU_486,
++ PCI_CPU_PENTIUM,
++ PCI_CPU_ALPHA = 0x10,
++ PCI_CPU_POWERPC = 0x20,
++ PCI_CPU_MIPS = 0x30,
++ PCI_CPU_COPROC = 0x40,
++ PCI_CPU_OTHER = 0x80
++} pci_cpu_subclasses;
+
-+/* enable structure packing */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#pragma pack(1)
-+#define PACKED
-+#endif
++typedef enum {
++ PCI_SERIAL_IEEE1394,
++ PCI_SERIAL_ACCESS,
++ PCI_SERIAL_SSA,
++ PCI_SERIAL_USB,
++ PCI_SERIAL_FIBER,
++ PCI_SERIAL_SMBUS,
++ PCI_SERIAL_OTHER = 0x80
++} pci_serial_subclasses;
+
-+#define VLAN_VID_MASK 0xfff /* low 12 bits are vlan id */
-+#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */
-+#define VLAN_PRI_SHIFT 13 /* user priority */
++typedef enum {
++ PCI_INTELLIGENT_I2O,
++} pci_intelligent_subclasses;
+
-+#define VLAN_PRI_MASK 7 /* 3 bits of priority */
++typedef enum {
++ PCI_SATELLITE_TV,
++ PCI_SATELLITE_AUDIO,
++ PCI_SATELLITE_VOICE,
++ PCI_SATELLITE_DATA,
++ PCI_SATELLITE_OTHER = 0x80
++} pci_satellite_subclasses;
+
-+#define VLAN_TAG_LEN 4
-+#define VLAN_TAG_OFFSET (2 * ETHER_ADDR_LEN)
++typedef enum {
++ PCI_CRYPT_NETWORK,
++ PCI_CRYPT_ENTERTAINMENT,
++ PCI_CRYPT_OTHER = 0x80
++} pci_crypt_subclasses;
+
-+struct ethervlan_header {
-+ uint8 ether_dhost[ETHER_ADDR_LEN];
-+ uint8 ether_shost[ETHER_ADDR_LEN];
-+ uint16 vlan_type; /* 0x8100 */
-+ uint16 vlan_tag; /* priority, cfi and vid */
-+ uint16 ether_type;
-+};
++typedef enum {
++ PCI_DSP_DPIO,
++ PCI_DSP_OTHER = 0x80
++} pci_dsp_subclasses;
+
-+#define ETHERVLAN_HDR_LEN (ETHER_HDR_LEN + VLAN_TAG_LEN)
++/* Header types */
++typedef enum {
++ PCI_HEADER_NORMAL,
++ PCI_HEADER_BRIDGE,
++ PCI_HEADER_CARDBUS
++} pci_header_types;
+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
+
-+#endif /* _vlan_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/wpa.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/wpa.h
---- linux-2.4.32/arch/mips/bcm947xx/include/proto/wpa.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/wpa.h 2005-12-16 23:39:10.756825000 +0100
-@@ -0,0 +1,140 @@
-+/*
-+ * Fundamental types and constants relating to WPA
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++/* Overlay for a PCI-to-PCI bridge */
+
-+#ifndef _proto_wpa_h_
-+#define _proto_wpa_h_
++#define PPB_RSVDA_MAX 2
++#define PPB_RSVDD_MAX 8
+
-+#include <typedefs.h>
-+#include <proto/ethernet.h>
++typedef struct _ppb_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long rsvd_a[PPB_RSVDA_MAX];
++ unsigned char prim_bus;
++ unsigned char sec_bus;
++ unsigned char sub_bus;
++ unsigned char sec_lat;
++ unsigned char io_base;
++ unsigned char io_lim;
++ unsigned short sec_status;
++ unsigned short mem_base;
++ unsigned short mem_lim;
++ unsigned short pf_mem_base;
++ unsigned short pf_mem_lim;
++ unsigned long pf_mem_base_hi;
++ unsigned long pf_mem_lim_hi;
++ unsigned short io_base_hi;
++ unsigned short io_lim_hi;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long rsvd_b;
++ unsigned char rsvd_c;
++ unsigned char int_pin;
++ unsigned short bridge_ctrl;
++ unsigned char chip_ctrl;
++ unsigned char diag_ctrl;
++ unsigned short arb_ctrl;
++ unsigned long rsvd_d[PPB_RSVDD_MAX];
++ unsigned char dev_dep[192];
++} ppb_config_regs;
+
-+/* enable structure packing */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#pragma pack(1)
-+#define PACKED
-+#endif
+
-+/* Reason Codes */
-+
-+/* 10 and 11 are from TGh. */
-+#define DOT11_RC_BAD_PC 10 /* Unacceptable power capability element */
-+#define DOT11_RC_BAD_CHANNELS 11 /* Unacceptable supported channels element */
-+/* 12 is unused */
-+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
-+#define DOT11_RC_INVALID_WPA_IE 13 /* Invalid info. element */
-+#define DOT11_RC_MIC_FAILURE 14 /* Michael failure */
-+#define DOT11_RC_4WH_TIMEOUT 15 /* 4-way handshake timeout */
-+#define DOT11_RC_GTK_UPDATE_TIMEOUT 16 /* Group key update timeout */
-+#define DOT11_RC_WPA_IE_MISMATCH 17 /* WPA IE in 4-way handshake differs from (re-)assoc. request/probe response */
-+#define DOT11_RC_INVALID_MC_CIPHER 18 /* Invalid multicast cipher */
-+#define DOT11_RC_INVALID_UC_CIPHER 19 /* Invalid unicast cipher */
-+#define DOT11_RC_INVALID_AKMP 20 /* Invalid authenticated key management protocol */
-+#define DOT11_RC_BAD_WPA_VERSION 21 /* Unsupported WPA version */
-+#define DOT11_RC_INVALID_WPA_CAP 22 /* Invalid WPA IE capabilities */
-+#define DOT11_RC_8021X_AUTH_FAIL 23 /* 802.1X authentication failure */
-+
-+#define WPA2_PMKID_LEN 16
-+
-+/* WPA IE fixed portion */
-+typedef struct
-+{
-+ uint8 tag; /* TAG */
-+ uint8 length; /* TAG length */
-+ uint8 oui[3]; /* IE OUI */
-+ uint8 oui_type; /* OUI type */
-+ struct {
-+ uint8 low;
-+ uint8 high;
-+ } PACKED version; /* IE version */
-+} PACKED wpa_ie_fixed_t;
-+#define WPA_IE_OUITYPE_LEN 4
-+#define WPA_IE_FIXED_LEN 8
-+#define WPA_IE_TAG_FIXED_LEN 6
++/* PCI CAPABILITY DEFINES */
++#define PCI_CAP_POWERMGMTCAP_ID 0x01
++#define PCI_CAP_MSICAP_ID 0x05
++#define PCI_CAP_PCIECAP_ID 0x10
+
-+typedef struct {
-+ uint8 tag; /* TAG */
-+ uint8 length; /* TAG length */
-+ struct {
-+ uint8 low;
-+ uint8 high;
-+ } PACKED version; /* IE version */
-+} PACKED wpa_rsn_ie_fixed_t;
-+#define WPA_RSN_IE_FIXED_LEN 4
-+#define WPA_RSN_IE_TAG_FIXED_LEN 2
-+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
-+
-+/* WPA suite/multicast suite */
-+typedef struct
-+{
-+ uint8 oui[3];
-+ uint8 type;
-+} PACKED wpa_suite_t, wpa_suite_mcast_t;
-+#define WPA_SUITE_LEN 4
-+
-+/* WPA unicast suite list/key management suite list */
-+typedef struct
-+{
-+ struct {
-+ uint8 low;
-+ uint8 high;
-+ } PACKED count;
-+ wpa_suite_t list[1];
-+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
-+#define WPA_IE_SUITE_COUNT_LEN 2
-+typedef struct
-+{
-+ struct {
-+ uint8 low;
-+ uint8 high;
-+ } PACKED count;
-+ wpa_pmkid_t list[1];
-+} PACKED wpa_pmkid_list_t;
-+
-+/* WPA cipher suites */
-+#define WPA_CIPHER_NONE 0 /* None */
-+#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */
-+#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */
-+#define WPA_CIPHER_AES_OCB 3 /* AES (OCB) */
-+#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */
-+#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */
-+
-+#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \
-+ (cipher) == WPA_CIPHER_WEP_40 || \
-+ (cipher) == WPA_CIPHER_WEP_104 || \
-+ (cipher) == WPA_CIPHER_TKIP || \
-+ (cipher) == WPA_CIPHER_AES_OCB || \
-+ (cipher) == WPA_CIPHER_AES_CCM)
-+
-+/* WPA TKIP countermeasures parameters */
-+#define WPA_TKIP_CM_DETECT 60 /* multiple MIC failure window (seconds) */
-+#define WPA_TKIP_CM_BLOCK 60 /* countermeasures active window (seconds) */
-+
-+/* WPA capabilities defined in 802.11i */
-+#define WPA_CAP_4_REPLAY_CNTRS 2
-+#define WPA_CAP_16_REPLAY_CNTRS 3
-+#define WPA_CAP_REPLAY_CNTR_SHIFT 2
-+#define WPA_CAP_REPLAY_CNTR_MASK 0x000c
-+
-+/* WPA Specific defines */
-+#define WPA_CAP_LEN 2
-+
-+#define WPA_CAP_WPA2_PREAUTH 1
-+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
++/* Data structure to define the Message Signalled Interrupt facility
++ * Valid for PCI and PCIE configurations */
++typedef struct _pciconfig_cap_msi {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short msgctrl;
++ unsigned int msgaddr;
++} pciconfig_cap_msi;
+
-+#endif /* _proto_wpa_h_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/rts/crc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/rts/crc.h
---- linux-2.4.32/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-12-16 23:39:10.928835750 +0100
-@@ -0,0 +1,69 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * crc.h - a function to compute crc for iLine10 headers
-+ ******************************************************************************/
++/* Data structure to define the Power managment facility
++ * Valid for PCI and PCIE configurations */
++typedef struct _pciconfig_cap_pwrmgmt {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pme_cap;
++ unsigned short pme_sts_ctrl;
++ unsigned char pme_bridge_ext;
++ unsigned char data;
++} pciconfig_cap_pwrmgmt;
+
-+#ifndef _RTS_CRC_H_
-+#define _RTS_CRC_H_ 1
++/* Data structure to define the PCIE capability */
++typedef struct _pciconfig_cap_pcie {
++ unsigned char capID;
++ unsigned char nextptr;
++ unsigned short pcie_cap;
++ unsigned int dev_cap;
++ unsigned short dev_ctrl;
++ unsigned short dev_status;
++ unsigned int link_cap;
++ unsigned short link_ctrl;
++ unsigned short link_status;
++} pciconfig_cap_pcie;
+
-+#include "typedefs.h"
++/* PCIE Enhanced CAPABILITY DEFINES */
++#define PCIE_EXTCFG_OFFSET 0x100
++#define PCIE_ADVERRREP_CAPID 0x0001
++#define PCIE_VC_CAPID 0x0002
++#define PCIE_DEVSNUM_CAPID 0x0003
++#define PCIE_PWRBUDGET_CAPID 0x0004
+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
++/* Header to define the PCIE specific capabilities in the extended config space */
++typedef struct _pcie_enhanced_caphdr {
++ unsigned short capID;
++ unsigned short cap_ver : 4;
++ unsigned short next_ptr : 12;
++} pcie_enhanced_caphdr;
+
+
-+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
-+#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value */
++/* Everything below is BRCM HND proprietary */
+
-+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */
++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
+
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
+
-+void hcs(uint8 *, uint);
-+uint8 crc8(uint8 *, uint, uint8);
-+uint16 crc16(uint8 *, uint, uint16);
-+uint32 crc32(uint8 *, uint, uint32);
++/* PCI_INT_STATUS */
++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */
+
-+/* macros for common usage */
++/* PCI_INT_MASK */
++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */
+
-+#define APPEND_CRC8(pbytes, nbytes) \
-+do { \
-+ uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
-+ (pbytes)[(nbytes)] = tmp; \
-+ (nbytes) += 1; \
-+} while (0)
++/* PCI_SPROM_CONTROL */
++#define SPROM_BLANK 0x04 /* indicating a blank sprom */
++#define SPROM_WRITEEN 0x10 /* sprom write enable */
++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
+
-+#define APPEND_CRC16(pbytes, nbytes) \
-+do { \
-+ uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
-+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \
-+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \
-+ (nbytes) += 2; \
-+} while (0)
++#define SPROM_SIZE 256 /* sprom size in 16-bit */
++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
+
-+#define APPEND_CRC32(pbytes, nbytes) \
-+do { \
-+ uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
-+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \
-+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \
-+ (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \
-+ (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \
-+ (nbytes) += 4; \
-+} while (0)
++/* PCI_CFG_CMD_STAT */
++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */
+
-+#ifdef __cplusplus
-+}
+#endif
-+
-+#endif /* _RTS_CRC_H_ */
diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h
--- linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-12-16 23:39:10.932836000 +0100
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+#endif /* _TYPEDEFS_H_ */
-diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/wlioctl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/wlioctl.h
---- linux-2.4.32/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/wlioctl.h 2005-12-16 23:39:10.940836500 +0100
-@@ -0,0 +1,1030 @@
-+/*
-+ * Custom OID/ioctl definitions for
-+ * Broadcom 802.11abg Networking Device Driver
-+ *
-+ * Definitions subject to change without notice.
-+ *
-+ * Copyright 2005, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _wlioctl_h_
-+#define _wlioctl_h_
-+
-+#include <typedefs.h>
-+#include <proto/ethernet.h>
-+#include <proto/bcmeth.h>
-+#include <proto/bcmevent.h>
-+#include <proto/802.11.h>
-+
-+/* require default structure packing */
-+#if !defined(__GNUC__)
-+#pragma pack(push,8)
-+#endif
-+
-+#define WL_NUMRATES 255 /* max # of rates in a rateset */
-+
-+typedef struct wl_rateset {
-+ uint32 count; /* # rates in this set */
-+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
-+} wl_rateset_t;
-+
-+#define WL_CHANSPEC_CHAN_MASK 0x0fff
-+#define WL_CHANSPEC_BAND_MASK 0xf000
-+#define WL_CHANSPEC_BAND_SHIFT 12
-+#define WL_CHANSPEC_BAND_A 0x1000
-+#define WL_CHANSPEC_BAND_B 0x2000
-+
-+/*
-+ * Per-bss information structure.
-+ */
-+
-+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
-+
-+typedef struct wl_bss_info {
-+ uint32 version; /* version field */
-+ uint32 length; /* byte length of data in this record, starting at version and including IEs */
-+ struct ether_addr BSSID;
-+ uint16 beacon_period; /* units are Kusec */
-+ uint16 capability; /* Capability information */
-+ uint8 SSID_len;
-+ uint8 SSID[32];
-+ struct {
-+ uint count; /* # rates in this set */
-+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
-+ } rateset; /* supported rates */
-+ uint8 channel; /* Channel no. */
-+ uint16 atim_window; /* units are Kusec */
-+ uint8 dtim_period; /* DTIM period */
-+ int16 RSSI; /* receive signal strength (in dBm) */
-+ int8 phy_noise; /* noise (in dBm) */
-+ uint32 ie_length; /* byte length of Information Elements */
-+ /* variable length Information Elements */
-+} wl_bss_info_t;
-+
-+typedef struct wlc_ssid {
-+ uint32 SSID_len;
-+ uchar SSID[32];
-+} wlc_ssid_t;
-+
-+typedef struct wl_scan_params {
-+ wlc_ssid_t ssid; /* default is {0, ""} */
-+ struct ether_addr bssid;/* default is bcast */
-+ int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
-+ int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
-+ int32 nprobes; /* -1 use default, number of probes per channel */
-+ int32 active_time; /* -1 use default, dwell time per channel for active scanning */
-+ int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */
-+ int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */
-+ int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */
-+ uint16 channel_list[1]; /* list of chanspecs */
-+} wl_scan_params_t;
-+/* size of wl_scan_params not including variable length array */
-+#define WL_SCAN_PARAMS_FIXED_SIZE 64
-+
-+typedef struct wl_scan_results {
-+ uint32 buflen;
-+ uint32 version;
-+ uint32 count;
-+ wl_bss_info_t bss_info[1];
-+} wl_scan_results_t;
-+/* size of wl_scan_results not including variable length array */
-+#define WL_SCAN_RESULTS_FIXED_SIZE 12
-+
-+/* uint32 list */
-+typedef struct wl_uint32_list {
-+ /* in - # of elements, out - # of entries */
-+ uint32 count;
-+ /* variable length uint32 list */
-+ uint32 element[1];
-+} wl_uint32_list_t;
-+
-+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
-+
-+typedef struct wl_channels_in_country {
-+ uint32 buflen;
-+ uint32 band;
-+ char country_abbrev[WLC_CNTRY_BUF_SZ];
-+ uint32 count;
-+ uint32 channel[1];
-+} wl_channels_in_country_t;
-+
-+typedef struct wl_country_list {
-+ uint32 buflen;
-+ uint32 band_set;
-+ uint32 band;
-+ uint32 count;
-+ char country_abbrev[1];
-+} wl_country_list_t;
-+
-+#define WL_RM_TYPE_BASIC 1
-+#define WL_RM_TYPE_CCA 2
-+#define WL_RM_TYPE_RPI 3
-+
-+#define WL_RM_FLAG_PARALLEL (1<<0)
-+
-+#define WL_RM_FLAG_LATE (1<<1)
-+#define WL_RM_FLAG_INCAPABLE (1<<2)
-+#define WL_RM_FLAG_REFUSED (1<<3)
-+
-+typedef struct wl_rm_req_elt {
-+ int8 type;
-+ int8 flags;
-+ uint16 chanspec;
-+ uint32 token; /* token for this measurement */
-+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
-+ uint32 tsf_l; /* TSF low 32-bits */
-+ uint32 dur; /* TUs */
-+} wl_rm_req_elt_t;
-+
-+typedef struct wl_rm_req {
-+ uint32 token; /* overall measurement set token */
-+ uint32 count; /* number of measurement reqests */
-+ wl_rm_req_elt_t req[1]; /* variable length block of requests */
-+} wl_rm_req_t;
-+#define WL_RM_REQ_FIXED_LEN 8
-+
-+typedef struct wl_rm_rep_elt {
-+ int8 type;
-+ int8 flags;
-+ uint16 chanspec;
-+ uint32 token; /* token for this measurement */
-+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
-+ uint32 tsf_l; /* TSF low 32-bits */
-+ uint32 dur; /* TUs */
-+ uint32 len; /* byte length of data block */
-+ uint8 data[1]; /* variable length data block */
-+} wl_rm_rep_elt_t;
-+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
-+
-+#define WL_RPI_REP_BIN_NUM 8
-+typedef struct wl_rm_rpi_rep {
-+ uint8 rpi[WL_RPI_REP_BIN_NUM];
-+ int8 rpi_max[WL_RPI_REP_BIN_NUM];
-+} wl_rm_rpi_rep_t;
-+
-+typedef struct wl_rm_rep {
-+ uint32 token; /* overall measurement set token */
-+ uint32 len; /* length of measurement report block */
-+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
-+} wl_rm_rep_t;
-+#define WL_RM_REP_FIXED_LEN 8
-+
-+
-+#if defined(BCMSUP_PSK)
-+typedef enum sup_auth_status {
-+ WLC_SUP_DISCONNECTED = 0,
-+ WLC_SUP_CONNECTING,
-+ WLC_SUP_IDREQUIRED,
-+ WLC_SUP_AUTHENTICATING,
-+ WLC_SUP_AUTHENTICATED,
-+ WLC_SUP_KEYXCHANGE,
-+ WLC_SUP_KEYED,
-+ WLC_SUP_TIMEOUT
-+} sup_auth_status_t;
-+#endif /* BCMCCX | BCMSUP_PSK */
-+
-+/* Enumerate crypto algorithms */
-+#define CRYPTO_ALGO_OFF 0
-+#define CRYPTO_ALGO_WEP1 1
-+#define CRYPTO_ALGO_TKIP 2
-+#define CRYPTO_ALGO_WEP128 3
-+#define CRYPTO_ALGO_AES_CCM 4
-+#define CRYPTO_ALGO_AES_OCB_MSDU 5
-+#define CRYPTO_ALGO_AES_OCB_MPDU 6
-+#define CRYPTO_ALGO_NALG 7
-+
-+#define WSEC_GEN_MIC_ERROR 0x0001
-+#define WSEC_GEN_REPLAY 0x0002
-+
-+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
-+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
-+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
-+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
-+
-+typedef struct wl_wsec_key {
-+ uint32 index; /* key index */
-+ uint32 len; /* key length */
-+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
-+ uint32 pad_1[18];
-+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-+ uint32 flags; /* misc flags */
-+ uint32 pad_2[2];
-+ int pad_3;
-+ int iv_initialized; /* has IV been initialized already? */
-+ int pad_4;
-+ /* Rx IV */
-+ struct {
-+ uint32 hi; /* upper 32 bits of IV */
-+ uint16 lo; /* lower 16 bits of IV */
-+ } rxiv;
-+ uint32 pad_5[2];
-+ struct ether_addr ea; /* per station */
-+} wl_wsec_key_t;
-+
-+
-+#define WSEC_MIN_PSK_LEN 8
-+#define WSEC_MAX_PSK_LEN 64
-+
-+/* Flag for key material needing passhash'ing */
-+#define WSEC_PASSPHRASE (1<<0)
-+
-+/* recepticle for WLC_SET_WSEC_PMK parameter */
-+typedef struct {
-+ ushort key_len; /* octets in key material */
-+ ushort flags; /* key handling qualification */
-+ uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
-+} wsec_pmk_t;
-+
-+/* wireless security bitvec */
-+#define WEP_ENABLED 0x0001
-+#define TKIP_ENABLED 0x0002
-+#define AES_ENABLED 0x0004
-+#define WSEC_SWFLAG 0x0008
-+#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
-+
-+/* WPA authentication mode bitvec */
-+#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
-+#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
-+#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
-+#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
-+/*#define WPA_AUTH_8021X 0x0020*/ /* 802.1x, reserved */
-+
-+#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
-+#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
-+
-+
-+
-+/* pmkid */
-+#define MAXPMKID 16
-+
-+typedef struct _pmkid
-+{
-+ struct ether_addr BSSID;
-+ uint8 PMKID[WPA2_PMKID_LEN];
-+} pmkid_t;
-+
-+typedef struct _pmkid_list
-+{
-+ uint32 npmkid;
-+ pmkid_t pmkid[1];
-+} pmkid_list_t;
-+
-+typedef struct _pmkid_cand {
-+ struct ether_addr BSSID;
-+ uint8 preauth;
-+} pmkid_cand_t;
-+
-+typedef struct _pmkid_cand_list {
-+ uint32 npmkid_cand;
-+ pmkid_cand_t pmkid_cand[1];
-+} pmkid_cand_list_t;
-+
-+
-+typedef struct wl_led_info {
-+ uint32 index; /* led index */
-+ uint32 behavior;
-+ bool activehi;
-+} wl_led_info_t;
-+
-+typedef struct wlc_assoc_info {
-+ uint32 req_len;
-+ uint32 resp_len;
-+ uint32 flags;
-+ struct dot11_assoc_req req;
-+ struct ether_addr reassoc_bssid; /* used in reassoc's */
-+ struct dot11_assoc_resp resp;
-+} wl_assoc_info_t;
-+/* flags */
-+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
-+/* srom read/write struct passed through ioctl */
-+typedef struct {
-+ uint byteoff; /* byte offset */
-+ uint nbytes; /* number of bytes */
-+ uint16 buf[1];
-+} srom_rw_t;
-+
-+/* R_REG and W_REG struct passed through ioctl */
-+typedef struct {
-+ uint32 byteoff; /* byte offset of the field in d11regs_t */
-+ uint32 val; /* read/write value of the field */
-+ uint32 size; /* sizeof the field */
-+ uint band; /* band (optional) */
-+} rw_reg_t;
-+
-+/* Structure used by GET/SET_ATTEN ioctls */
-+typedef struct {
-+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */
-+ uint16 bb; /* Baseband attenuation */
-+ uint16 radio; /* Radio attenuation */
-+ uint16 txctl1; /* Radio TX_CTL1 value */
-+} atten_t;
-+
-+/* Used to get specific STA parameters */
-+typedef struct {
-+ uint32 val;
-+ struct ether_addr ea;
-+} scb_val_t;
-+
-+
-+/* Event data type */
-+typedef struct wlc_event {
-+ wl_event_msg_t event; /* encapsulated event */
-+ struct ether_addr *addr; /* used to keep a trace of the potential present of
-+ an address in wlc_event_msg_t */
-+ void *data; /* used to hang additional data on an event */
-+ struct wlc_event *next; /* enables ordered list of pending events */
-+} wlc_event_t;
-+
-+#define BCM_MAC_STATUS_INDICATION (0x40010200L)
-+
-+typedef struct {
-+ uint16 ver; /* version of this struct */
-+ uint16 len; /* length in bytes of this structure */
-+ uint16 cap; /* sta's advertized capabilities */
-+ uint32 flags; /* flags defined below */
-+ uint32 idle; /* time since data pkt rx'd from sta */
-+ struct ether_addr ea; /* Station address */
-+ wl_rateset_t rateset; /* rateset in use */
-+ uint32 in; /* seconds elapsed since associated */
-+ uint32 listen_interval_inms; /* Min Listen interval in ms for this STA*/
-+} sta_info_t;
-+
-+#define WL_STA_VER 2
-+
-+/* flags fields */
-+#define WL_STA_BRCM 0x01
-+#define WL_STA_WME 0x02
-+#define WL_STA_ABCAP 0x04
-+#define WL_STA_AUTHE 0x08
-+#define WL_STA_ASSOC 0x10
-+#define WL_STA_AUTHO 0x20
-+#define WL_STA_WDS 0x40
-+#define WL_WDS_LINKUP 0x80
-+
-+
-+/*
-+ * Country locale determines which channels are available to us.
-+ */
-+typedef enum _wlc_locale {
-+ WLC_WW = 0, /* Worldwide */
-+ WLC_THA, /* Thailand */
-+ WLC_ISR, /* Israel */
-+ WLC_JDN, /* Jordan */
-+ WLC_PRC, /* China */
-+ WLC_JPN, /* Japan */
-+ WLC_FCC, /* USA */
-+ WLC_EUR, /* Europe */
-+ WLC_USL, /* US Low Band only */
-+ WLC_JPH, /* Japan High Band only */
-+ WLC_ALL, /* All the channels in this band */
-+ WLC_11D, /* Represents locale recieved by 11d beacons */
-+ WLC_LAST_LOCALE,
-+ WLC_UNDEFINED_LOCALE = 0xf
-+} wlc_locale_t;
-+
-+/* channel encoding */
-+typedef struct channel_info {
-+ int hw_channel;
-+ int target_channel;
-+ int scan_channel;
-+} channel_info_t;
-+
-+/* For ioctls that take a list of MAC addresses */
-+struct maclist {
-+ uint count; /* number of MAC addresses */
-+ struct ether_addr ea[1]; /* variable length array of MAC addresses */
-+};
-+
-+/* get pkt count struct passed through ioctl */
-+typedef struct get_pktcnt {
-+ uint rx_good_pkt;
-+ uint rx_bad_pkt;
-+ uint tx_good_pkt;
-+ uint tx_bad_pkt;
-+} get_pktcnt_t;
-+
-+/* Linux network driver ioctl encoding */
-+typedef struct wl_ioctl {
-+ uint cmd; /* common ioctl definition */
-+ void *buf; /* pointer to user buffer */
-+ uint len; /* length of user buffer */
-+ bool set; /* get or set request (optional) */
-+ uint used; /* bytes read or written (optional) */
-+ uint needed; /* bytes needed (optional) */
-+} wl_ioctl_t;
-+
-+/*
-+ * Structure for passing hardware and software
-+ * revision info up from the driver.
-+ */
-+typedef struct wlc_rev_info {
-+ uint vendorid; /* PCI vendor id */
-+ uint deviceid; /* device id of chip */
-+ uint radiorev; /* radio revision */
-+ uint chiprev; /* chip revision */
-+ uint corerev; /* core revision */
-+ uint boardid; /* board identifier (usu. PCI sub-device id) */
-+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
-+ uint boardrev; /* board revision */
-+ uint driverrev; /* driver version */
-+ uint ucoderev; /* microcode version */
-+ uint bus; /* bus type */
-+ uint chipnum; /* chip number */
-+} wlc_rev_info_t;
-+
-+#define WL_BRAND_MAX 10
-+typedef struct wl_instance_info {
-+ uint instance;
-+ char brand[WL_BRAND_MAX];
-+} wl_instance_info_t;
-+
-+/* check this magic number */
-+#define WLC_IOCTL_MAGIC 0x14e46c77
-+
-+/* bump this number if you change the ioctl interface */
-+#define WLC_IOCTL_VERSION 1
-+
-+#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */
-+#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
-+
-+/* common ioctl definitions */
-+#define WLC_GET_MAGIC 0
-+#define WLC_GET_VERSION 1
-+#define WLC_UP 2
-+#define WLC_DOWN 3
-+#define WLC_DUMP 6
-+#define WLC_GET_MSGLEVEL 7
-+#define WLC_SET_MSGLEVEL 8
-+#define WLC_GET_PROMISC 9
-+#define WLC_SET_PROMISC 10
-+#define WLC_GET_RATE 12
-+/* #define WLC_SET_RATE 13 */ /* no longer supported */
-+#define WLC_GET_INSTANCE 14
-+/* #define WLC_GET_FRAG 15 */ /* no longer supported */
-+/* #define WLC_SET_FRAG 16 */ /* no longer supported */
-+/* #define WLC_GET_RTS 17 */ /* no longer supported */
-+/* #define WLC_SET_RTS 18 */ /* no longer supported */
-+#define WLC_GET_INFRA 19
-+#define WLC_SET_INFRA 20
-+#define WLC_GET_AUTH 21
-+#define WLC_SET_AUTH 22
-+#define WLC_GET_BSSID 23
-+#define WLC_SET_BSSID 24
-+#define WLC_GET_SSID 25
-+#define WLC_SET_SSID 26
-+#define WLC_RESTART 27
-+#define WLC_GET_CHANNEL 29
-+#define WLC_SET_CHANNEL 30
-+#define WLC_GET_SRL 31
-+#define WLC_SET_SRL 32
-+#define WLC_GET_LRL 33
-+#define WLC_SET_LRL 34
-+#define WLC_GET_PLCPHDR 35
-+#define WLC_SET_PLCPHDR 36
-+#define WLC_GET_RADIO 37
-+#define WLC_SET_RADIO 38
-+#define WLC_GET_PHYTYPE 39
-+/* #define WLC_GET_WEP 42 */ /* no longer supported */
-+/* #define WLC_SET_WEP 43 */ /* no longer supported */
-+#define WLC_GET_KEY 44
-+#define WLC_SET_KEY 45
-+#define WLC_GET_REGULATORY 46
-+#define WLC_SET_REGULATORY 47
-+#define WLC_SCAN 50
-+#define WLC_SCAN_RESULTS 51
-+#define WLC_DISASSOC 52
-+#define WLC_REASSOC 53
-+#define WLC_GET_ROAM_TRIGGER 54
-+#define WLC_SET_ROAM_TRIGGER 55
-+#define WLC_GET_TXANT 61
-+#define WLC_SET_TXANT 62
-+#define WLC_GET_ANTDIV 63
-+#define WLC_SET_ANTDIV 64
-+/* #define WLC_GET_TXPWR 65 */ /* no longer supported */
-+/* #define WLC_SET_TXPWR 66 */ /* no longer supported */
-+#define WLC_GET_CLOSED 67
-+#define WLC_SET_CLOSED 68
-+#define WLC_GET_MACLIST 69
-+#define WLC_SET_MACLIST 70
-+#define WLC_GET_RATESET 71
-+#define WLC_SET_RATESET 72
-+#define WLC_GET_LOCALE 73
-+#define WLC_LONGTRAIN 74
-+#define WLC_GET_BCNPRD 75
-+#define WLC_SET_BCNPRD 76
-+#define WLC_GET_DTIMPRD 77
-+#define WLC_SET_DTIMPRD 78
-+#define WLC_GET_SROM 79
-+#define WLC_SET_SROM 80
-+#define WLC_GET_WEP_RESTRICT 81
-+#define WLC_SET_WEP_RESTRICT 82
-+#define WLC_GET_COUNTRY 83
-+#define WLC_SET_COUNTRY 84
-+#define WLC_GET_REVINFO 98
-+#define WLC_GET_MACMODE 105
-+#define WLC_SET_MACMODE 106
-+#define WLC_GET_GMODE 109
-+#define WLC_SET_GMODE 110
-+#define WLC_GET_CURR_RATESET 114 /* current rateset */
-+#define WLC_GET_SCANSUPPRESS 115
-+#define WLC_SET_SCANSUPPRESS 116
-+#define WLC_GET_AP 117
-+#define WLC_SET_AP 118
-+#define WLC_GET_EAP_RESTRICT 119
-+#define WLC_SET_EAP_RESTRICT 120
-+#define WLC_GET_WDSLIST 123
-+#define WLC_SET_WDSLIST 124
-+#define WLC_GET_RSSI 127
-+#define WLC_GET_WSEC 133
-+#define WLC_SET_WSEC 134
-+#define WLC_GET_BSS_INFO 136
-+#define WLC_GET_LAZYWDS 138
-+#define WLC_SET_LAZYWDS 139
-+#define WLC_GET_BANDLIST 140
-+#define WLC_GET_BAND 141
-+#define WLC_SET_BAND 142
-+#define WLC_GET_SHORTSLOT 144
-+#define WLC_GET_SHORTSLOT_OVERRIDE 145
-+#define WLC_SET_SHORTSLOT_OVERRIDE 146
-+#define WLC_GET_SHORTSLOT_RESTRICT 147
-+#define WLC_SET_SHORTSLOT_RESTRICT 148
-+#define WLC_GET_GMODE_PROTECTION 149
-+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
-+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
-+#define WLC_UPGRADE 152
-+/* #define WLC_GET_MRATE 153 */ /* no longer supported */
-+/* #define WLC_SET_MRATE 154 */ /* no longer supported */
-+#define WLC_GET_ASSOCLIST 159
-+#define WLC_GET_CLK 160
-+#define WLC_SET_CLK 161
-+#define WLC_GET_UP 162
-+#define WLC_OUT 163
-+#define WLC_GET_WPA_AUTH 164
-+#define WLC_SET_WPA_AUTH 165
-+#define WLC_GET_GMODE_PROTECTION_CONTROL 178
-+#define WLC_SET_GMODE_PROTECTION_CONTROL 179
-+#define WLC_GET_PHYLIST 180
-+#define WLC_GET_KEY_SEQ 183
-+#define WLC_GET_GMODE_PROTECTION_CTS 198
-+#define WLC_SET_GMODE_PROTECTION_CTS 199
-+#define WLC_GET_PIOMODE 203
-+#define WLC_SET_PIOMODE 204
-+#define WLC_SET_LED 209
-+#define WLC_GET_LED 210
-+#define WLC_GET_CHANNEL_SEL 215
-+#define WLC_START_CHANNEL_SEL 216
-+#define WLC_GET_VALID_CHANNELS 217
-+#define WLC_GET_FAKEFRAG 218
-+#define WLC_SET_FAKEFRAG 219
-+#define WLC_GET_WET 230
-+#define WLC_SET_WET 231
-+#define WLC_GET_KEY_PRIMARY 235
-+#define WLC_SET_KEY_PRIMARY 236
-+#define WLC_GET_RADAR 242
-+#define WLC_SET_RADAR 243
-+#define WLC_SET_SPECT_MANAGMENT 244
-+#define WLC_GET_SPECT_MANAGMENT 245
-+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
-+#define WLC_SET_CS_SCAN_TIMER 248
-+#define WLC_GET_CS_SCAN_TIMER 249
-+#define WLC_SEND_PWR_CONSTRAINT 254
-+#define WLC_CURRENT_PWR 256
-+#define WLC_GET_CHANNELS_IN_COUNTRY 260
-+#define WLC_GET_COUNTRY_LIST 261
-+#define WLC_GET_VAR 262 /* get value of named variable */
-+#define WLC_SET_VAR 263 /* set named variable to value */
-+#define WLC_NVRAM_GET 264
-+#define WLC_NVRAM_SET 265
-+#define WLC_SET_WSEC_PMK 268
-+#define WLC_GET_AUTH_MODE 269
-+#define WLC_SET_AUTH_MODE 270
-+#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
-+#define WLC_NVOTPW 274
-+/* #define WLC_OTPW 275 */ /* no longer supported */
-+#define WLC_SET_LOCALE 278
-+#define WLC_LAST 279 /* do not change - use get_var/set_var */
-+
-+/*
-+ * Minor kludge alert:
-+ * Duplicate a few definitions that irelay requires from epiioctl.h here
-+ * so caller doesn't have to include this file and epiioctl.h .
-+ * If this grows any more, it would be time to move these irelay-specific
-+ * definitions out of the epiioctl.h and into a separate driver common file.
-+ */
-+#ifndef EPICTRL_COOKIE
-+#define EPICTRL_COOKIE 0xABADCEDE
-+#endif
-+
-+/* vx wlc ioctl's offset */
-+#define CMN_IOCTL_OFF 0x180
-+
-+/*
-+ * custom OID support
-+ *
-+ * 0xFF - implementation specific OID
-+ * 0xE4 - first byte of Broadcom PCI vendor ID
-+ * 0x14 - second byte of Broadcom PCI vendor ID
-+ * 0xXX - the custom OID number
-+ */
-+
-+/* begin 0x1f values beyond the start of the ET driver range. */
-+#define WL_OID_BASE 0xFFE41420
-+
-+/* NDIS overrides */
-+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
-+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
-+
-+#define WL_DECRYPT_STATUS_SUCCESS 1
-+#define WL_DECRYPT_STATUS_FAILURE 2
-+#define WL_DECRYPT_STATUS_UNKNOWN 3
-+
-+/* allows user-mode app to poll the status of USB image upgrade */
-+#define WLC_UPGRADE_SUCCESS 0
-+#define WLC_UPGRADE_PENDING 1
-+
-+#ifdef CONFIG_USBRNDIS_RETAIL
-+/* struct passed in for WLC_NDCONFIG_ITEM */
-+typedef struct {
-+ char *name;
-+ void *param;
-+} ndconfig_item_t;
-+#endif
-+
-+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-+#define WL_RADIO_SW_DISABLE (1<<0)
-+#define WL_RADIO_HW_DISABLE (1<<1)
-+#define WL_RADIO_MPC_DISABLE (1<<2)
-+#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any 802.11 channel */
-+
-+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
-+#define WL_TXPWR_OVERRIDE (1<<31)
-+
-+/* "diag" iovar argument and error code */
-+#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
-+#define WL_DIAG_MEMORY 3 /* d11 memory test */
-+#define WL_DIAG_LED 4 /* LED test */
-+#define WL_DIAG_REG 5 /* d11/phy register test */
-+#define WL_DIAG_SROM 6 /* srom read/crc test */
-+#define WL_DIAG_DMA 7 /* DMA test */
-+
-+#define WL_DIAGERR_SUCCESS 0
-+#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
-+#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
-+#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
-+#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
-+#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
-+#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
-+#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
-+#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
-+#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
-+#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
-+
-+/* Bus types */
-+#define WL_SB_BUS 0 /* Silicon Backplane */
-+#define WL_PCI_BUS 1 /* PCI target */
-+#define WL_PCMCIA_BUS 2 /* PCMCIA target */
-+
-+/* band types */
-+#define WLC_BAND_AUTO 0 /* auto-select */
-+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
-+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
-+#define WLC_BAND_ALL 3 /* all bands */
-+
-+/* phy types (returned by WLC_GET_PHYTPE) */
-+#define WLC_PHY_TYPE_A 0
-+#define WLC_PHY_TYPE_B 1
-+#define WLC_PHY_TYPE_G 2
-+#define WLC_PHY_TYPE_NULL 0xf
-+
-+/* MAC list modes */
-+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
-+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
-+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
-+
-+/*
-+ *
-+ */
-+#define GMODE_LEGACY_B 0
-+#define GMODE_AUTO 1
-+#define GMODE_ONLY 2
-+#define GMODE_B_DEFERRED 3
-+#define GMODE_PERFORMANCE 4
-+#define GMODE_LRS 5
-+#define GMODE_MAX 6
-+
-+/* values for PLCPHdr_override */
-+#define WLC_PLCP_AUTO -1
-+#define WLC_PLCP_SHORT 0
-+#define WLC_PLCP_LONG 1
-+
-+/* values for g_protection_override */
-+#define WLC_G_PROTECTION_AUTO -1
-+#define WLC_G_PROTECTION_OFF 0
-+#define WLC_G_PROTECTION_ON 1
-+
-+/* values for g_protection_control */
-+#define WLC_G_PROTECTION_CTL_OFF 0
-+#define WLC_G_PROTECTION_CTL_LOCAL 1
-+#define WLC_G_PROTECTION_CTL_OVERLAP 2
-+
-+/* Values for PM */
-+#define PM_OFF 0
-+#define PM_MAX 1
-+#define PM_FAST 2
-+
-+
-+
-+typedef struct {
-+ int npulses; /* required number of pulses at n * t_int */
-+ int ncontig; /* required number of pulses at t_int */
-+ int min_pw; /* minimum pulse width (20 MHz clocks) */
-+ int max_pw; /* maximum pulse width (20 MHz clocks) */
-+ uint16 thresh0; /* Radar detection, thresh 0 */
-+ uint16 thresh1; /* Radar detection, thresh 1 */
-+} wl_radar_args_t;
-+
-+/* radar iovar SET defines */
-+#define WL_RADRA_DETECTOR_OFF 0 /* radar dector off */
-+#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */
-+#define WL_RADAR_SIMULATED 2 /* force radar detector to declare detection once */
-+
-+/* dfs_status iovar-related defines */
-+
-+/* cac - channel availability check,
-+ * ism - in-service monitoring
-+ * csa - channel switching anouncement
-+ */
-+
-+/* cac state values */
-+#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */
-+#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */
-+#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */
-+#define WL_DFS_CACSTATE_CSA 3 /* csa */
-+#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */
-+#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */
-+#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */
-+#define WL_DFS_CACSTATES 7 /* this many states exist */
-+
-+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
-+typedef struct {
-+ uint state; /* noted by WL_DFS_CACSTATE_XX. */
-+ uint duration; /* time spent in ms in state. */
-+ /* as dfs enters ISM state, it removes the operational channel from quiet channel list
-+ * and notes the channel in channel_cleared. set to 0 if no channel is cleared
-+ */
-+ uint channel_cleared;
-+} wl_dfs_status_t;
-+
-+#define NUM_PWRCTRL_RATES 12
-+
-+
-+/* 802.11h enforcement levels */
-+#define SPECT_MNGMT_OFF 0 /* 11h disabled */
-+#define SPECT_MNGMT_LOOSE 1 /* allow scan lists to contain non-11h AP */
-+#define SPECT_MNGMT_STRICT 2 /* prune out non-11h APs from scan list */
-+#define SPECT_MNGMT_11D 3 /* switch to 802.11D mode */
-+
-+#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */
-+#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */
-+#define WL_CHAN_BAND_A (1 << 2) /* A-band channel */
-+#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */
-+#define WL_CHAN_INACTIVE (1 << 4) /* temporarily out of service due to radar */
-+#define WL_CHAN_RADAR_PASSIVE (1 << 5) /* radar channel is in passive mode */
-+
-+#define WL_MPC_VAL 0x00400000
-+#define WL_APSTA_VAL 0x00800000
-+#define WL_DFS_VAL 0x01000000
-+
-+/* max # of leds supported by GPIO (gpio pin# == led index#) */
-+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
-+
-+/* led per-pin behaviors */
-+#define WL_LED_OFF 0 /* always off */
-+#define WL_LED_ON 1 /* always on */
-+#define WL_LED_ACTIVITY 2 /* activity */
-+#define WL_LED_RADIO 3 /* radio enabled */
-+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
-+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
-+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
-+#define WL_LED_WI1 7
-+#define WL_LED_WI2 8
-+#define WL_LED_WI3 9
-+#define WL_LED_ASSOC 10 /* associated state indicator */
-+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
-+#define WL_LED_NUMBEHAVIOR 12
-+
-+/* led behavior numeric value format */
-+#define WL_LED_BEH_MASK 0x7f /* behavior mask */
-+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
-+
-+
-+/* WDS link local endpoint WPA role */
-+#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
-+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
-+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
-+
-+/* number of bytes needed to define a 128-bit mask for MAC event reporting */
-+#define WL_EVENTING_MASK_LEN 16
-+
-+/* Structures and constants used for "vndr_ie" IOVar interface */
-+#define VNDR_IE_CMD_LEN 4 /* length of the set command string: "add", "del" (+ NULL) */
-+
-+/* 802.11 Mgmt Packet flags */
-+#define VNDR_IE_BEACON_FLAG 0x1
-+#define VNDR_IE_PRBRSP_FLAG 0x2
-+#define VNDR_IE_ASSOCRSP_FLAG 0x4
-+#define VNDR_IE_AUTHRSP_FLAG 0x8
-+
-+typedef struct {
-+ uint32 pktflag; /* bitmask indicating which packet(s) contain this IE */
-+ vndr_ie_t vndr_ie_data; /* vendor IE data */
-+} vndr_ie_info_t;
-+
-+typedef struct {
-+ int iecount; /* number of entries in the vndr_ie_list[] array */
-+ vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */
-+} vndr_ie_buf_t;
-+
-+typedef struct {
-+ char cmd[VNDR_IE_CMD_LEN]; /* vndr_ie IOVar set command : "add", "del" + NULL */
-+ vndr_ie_buf_t vndr_ie_buffer; /* buffer containing Vendor IE list information */
-+} vndr_ie_setbuf_t;
-+
-+/* join target preference types */
-+#define WL_JOIN_PREF_RSSI 1 /* by RSSI, mandatory */
-+#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers, optional, RSN and WPA as values */
-+#define WL_JOIN_PREF_BAND 3 /* by 802.11 band, optional, WLC_BAND_XXXX as values */
-+
-+/* band preference */
-+#define WLJP_BAND_ASSOC_PREF 255 /* use assoc preference settings */
-+ /* others use WLC_BAND_XXXX as values */
-+
-+/* any multicast cipher suite */
-+#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
-+
-+#if !defined(__GNUC__)
-+#pragma pack(pop)
-+#endif
-+
-+#define NFIFO 6 /* # tx/rx fifopairs */
-+
-+#define WL_CNT_T_VERSION 1 /* current version of wl_cnt_t struct */
-+
-+typedef struct {
-+ uint16 version; /* see definition of WL_CNT_T_VERSION */
-+ uint16 length; /* length of entire structure */
-+
-+ /* transmit stat counters */
-+ uint32 txframe; /* tx data frames */
-+ uint32 txbyte; /* tx data bytes */
-+ uint32 txretrans; /* tx mac retransmits */
-+ uint32 txerror; /* tx data errors */
-+ uint32 txctl; /* tx management frames */
-+ uint32 txprshort; /* tx short preamble frames */
-+ uint32 txserr; /* tx status errors */
-+ uint32 txnobuf; /* tx out of buffers errors */
-+ uint32 txnoassoc; /* tx discard because we're not associated */
-+ uint32 txrunt; /* tx runt frames */
-+ uint32 txchit; /* tx header cache hit (fastpath) */
-+ uint32 txcmiss; /* tx header cache miss (slowpath) */
-+
-+ /* transmit chip error counters */
-+ uint32 txuflo; /* tx fifo underflows */
-+ uint32 txphyerr; /* tx phy errors (indicated in tx status) */
-+ uint32 txphycrs;
-+
-+ /* receive stat counters */
-+ uint32 rxframe; /* rx data frames */
-+ uint32 rxbyte; /* rx data bytes */
-+ uint32 rxerror; /* rx data errors */
-+ uint32 rxctl; /* rx management frames */
-+ uint32 rxnobuf; /* rx out of buffers errors */
-+ uint32 rxnondata; /* rx non data frames in the data channel errors */
-+ uint32 rxbadds; /* rx bad DS errors */
-+ uint32 rxbadcm; /* rx bad control or management frames */
-+ uint32 rxfragerr; /* rx fragmentation errors */
-+ uint32 rxrunt; /* rx runt frames */
-+ uint32 rxgiant; /* rx giant frames */
-+ uint32 rxnoscb; /* rx no scb error */
-+ uint32 rxbadproto; /* rx invalid frames */
-+ uint32 rxbadsrcmac; /* rx frames with Invalid Src Mac*/
-+ uint32 rxbadda; /* rx frames tossed for invalid da */
-+ uint32 rxfilter; /* rx frames filtered out */
-+
-+ /* receive chip error counters */
-+ uint32 rxoflo; /* rx fifo overflow errors */
-+ uint32 rxuflo[NFIFO]; /* rx dma descriptor underflow errors */
-+
-+ uint32 d11cnt_txrts_off; /* d11cnt txrts value when reset d11cnt */
-+ uint32 d11cnt_rxcrc_off; /* d11cnt rxcrc value when reset d11cnt */
-+ uint32 d11cnt_txnocts_off; /* d11cnt txnocts value when reset d11cnt */
-+
-+ /* misc counters */
-+ uint32 dmade; /* tx/rx dma descriptor errors */
-+ uint32 dmada; /* tx/rx dma data errors */
-+ uint32 dmape; /* tx/rx dma descriptor protocol errors */
-+ uint32 reset; /* reset count */
-+ uint32 tbtt; /* cnts the TBTT int's */
-+ uint32 txdmawar;
-+
-+ /* MAC counters: 32-bit version of d11.h's macstat_t */
-+ uint32 txallfrm; /* total number of frames sent, incl. Data, ACK, RTS, CTS,
-+ Control Management (includes retransmissions) */
-+ uint32 txrtsfrm; /* number of RTS sent out by the MAC */
-+ uint32 txctsfrm; /* number of CTS sent out by the MAC */
-+ uint32 txackfrm; /* number of ACK frames sent out */
-+ uint32 txdnlfrm; /* Not used */
-+ uint32 txbcnfrm; /* beacons transmitted */
-+ uint32 txfunfl[8]; /* per-fifo tx underflows */
-+ uint32 txtplunfl; /* Template underflows (mac was too slow to transmit ACK/CTS or BCN) */
-+ uint32 txphyerror; /* Transmit phy error, type of error is reported in tx-status for
-+ driver enqueued frames*/
-+ uint32 rxfrmtoolong; /* Received frame longer than legal limit (2346 bytes) */
-+ uint32 rxfrmtooshrt; /* Received frame did not contain enough bytes for its frame type */
-+ uint32 rxinvmachdr; /* Either the protocol version != 0 or frame type not
-+ data/control/management*/
-+ uint32 rxbadfcs; /* number of frames for which the CRC check failed in the MAC */
-+ uint32 rxbadplcp; /* parity check of the PLCP header failed */
-+ uint32 rxcrsglitch; /* PHY was able to correlate the preamble but not the header */
-+ uint32 rxstrt; /* Number of received frames with a good PLCP (i.e. passing parity check) */
-+ uint32 rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
-+ uint32 rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
-+ uint32 rxcfrmucast; /* number of received CNTRL frames with good FCS and matching RA */
-+ uint32 rxrtsucast; /* number of unicast RTS addressed to the MAC (good FCS) */
-+ uint32 rxctsucast; /* number of unicast CTS addressed to the MAC (good FCS)*/
-+ uint32 rxackucast; /* number of ucast ACKS received (good FCS)*/
-+ uint32 rxdfrmocast; /* number of received DATA frames with good FCS and not matching RA */
-+ uint32 rxmfrmocast; /* number of received MGMT frames with good FCS and not matching RA */
-+ uint32 rxcfrmocast; /* number of received CNTRL frame with good FCS and not matching RA */
-+ uint32 rxrtsocast; /* number of received RTS not addressed to the MAC */
-+ uint32 rxctsocast; /* number of received CTS not addressed to the MAC */
-+ uint32 rxdfrmmcast; /* number of RX Data multicast frames received by the MAC */
-+ uint32 rxmfrmmcast; /* number of RX Management multicast frames received by the MAC */
-+ uint32 rxcfrmmcast; /* number of RX Control multicast frames received by the MAC (unlikely
-+ to see these) */
-+ uint32 rxbeaconmbss; /* beacons received from member of BSS */
-+ uint32 rxdfrmucastobss; /* number of unicast frames addressed to the MAC from other BSS (WDS FRAME) */
-+ uint32 rxbeaconobss; /* beacons received from other BSS */
-+ uint32 rxrsptmout; /* Number of response timeouts for transmitted frames expecting a
-+ response */
-+ uint32 bcntxcancl; /* transmit beacons cancelled due to receipt of beacon (IBSS) */
-+ uint32 rxf0ovfl; /* Number of receive fifo 0 overflows */
-+ uint32 rxf1ovfl; /* Number of receive fifo 1 overflows (obsolete) */
-+ uint32 rxf2ovfl; /* Number of receive fifo 2 overflows (obsolete) */
-+ uint32 txsfovfl; /* Number of transmit status fifo overflows (obsolete) */
-+ uint32 pmqovfl; /* Number of PMQ overflows */
-+ uint32 rxcgprqfrm; /* Number of received Probe requests that made it into the PRQ fifo */
-+ uint32 rxcgprsqovfl; /* Rx Probe Request Que overflow in the AP */
-+ uint32 txcgprsfail; /* Tx Probe Response Fail. AP sent probe response but did not get ACK */
-+ uint32 txcgprssuc; /* Tx Probe Rresponse Success (ACK was received) */
-+ uint32 prs_timeout; /* Number of probe requests that were dropped from the PRQ fifo because
-+ a probe response could not be sent out within the time limit defined
-+ in M_PRS_MAXTIME */
-+ uint32 rxnack; /* Number of NACKS received (Afterburner) */
-+ uint32 frmscons; /* Number of frames completed without transmission because of an
-+ Afterburner re-queue */
-+ uint32 txnack; /* Number of NACKs transmtitted (Afterburner) */
-+ uint32 txglitch_nack; /* obsolete */
-+ uint32 txburst; /* obsolete */
-+ uint32 rxburst; /* obsolete */
-+
-+ /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
-+ uint32 txfrag; /* dot11TransmittedFragmentCount */
-+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
-+ uint32 txfail; /* dot11FailedCount */
-+ uint32 txretry; /* dot11RetryCount */
-+ uint32 txretrie; /* dot11MultipleRetryCount */
-+ uint32 rxdup; /* dot11FrameduplicateCount */
-+ uint32 txrts; /* dot11RTSSuccessCount */
-+ uint32 txnocts; /* dot11RTSFailureCount */
-+ uint32 txnoack; /* dot11ACKFailureCount */
-+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
-+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
-+ uint32 rxcrc; /* dot11FCSErrorCount */
-+ uint32 txfrmsnt; /* dot11TransmittedFrameCount (bogus MIB?) */
-+ uint32 rxundec; /* dot11WEPUndecryptableCount */
-+
-+ /* WPA2 counters (see rxundec for DecryptFailureCount) */
-+ uint32 tkipmicfaill; /* TKIPLocalMICFailures */
-+ uint32 tkipcntrmsr; /* TKIPCounterMeasuresInvoked */
-+ uint32 tkipreplay; /* TKIPReplays */
-+ uint32 ccmpfmterr; /* CCMPFormatErrors */
-+ uint32 ccmpreplay; /* CCMPReplays */
-+ uint32 ccmpundec; /* CCMPDecryptErrors */
-+ uint32 fourwayfail; /* FourWayHandshakeFailures */
-+ uint32 wepundec; /* dot11WEPUndecryptableCount */
-+ uint32 wepicverr; /* dot11WEPICVErrorCount */
-+ uint32 decsuccess; /* DecryptSuccessCount */
-+ uint32 tkipicverr; /* TKIPICVErrorCount */
-+ uint32 wepexcluded; /* dot11WEPExcludedCount */
-+} wl_cnt_t;
-+
-+#endif /* _wlioctl_h_ */
diff -Nur linux-2.4.32/arch/mips/bcm947xx/Makefile linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile
--- linux-2.4.32/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile 2005-12-19 01:56:51.733868750 +0100
diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c
--- linux-2.4.32/drivers/net/hnd/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c 2005-12-16 23:39:11.284858000 +0100
-@@ -0,0 +1,936 @@
+@@ -0,0 +1,938 @@
+/*
+ * Misc useful routines to access NIC SROM/OTP .
+ *
+#include <sbutils.h>
+#include <bcmnvram.h>
+
-+#include <proto/ethernet.h> /* for sprom content groking */
++struct ether_addr {
++ uint8 octet[6];
++} PACKED;
+
+#define VARS_MAX 4096 /* should be reduced */
+
+
+ case CISTPL_FUNCE:
+ if (cis[i] == LAN_NID) {
-+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
++ ASSERT(cis[i + 1] == 6);
+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
+ vp++;
+ ea.octet[3] = b[woff+1] & 0xff;
+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
++ woff += 3;
+ bcm_ether_ntoa((uchar*)&ea, eabuf);
+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
+ vp++;
+ ea.octet[3] = b[woff+1] & 0xff;
+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
++ woff += 3;
+ bcm_ether_ntoa((uchar*)&ea, eabuf);
+ vp += sprintf(vp, "et0macaddr=%s", eabuf);
+ vp++;
+ ea.octet[3] = b[woff+1] & 0xff;
+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
++ woff += 3;
+ bcm_ether_ntoa((uchar*)&ea, eabuf);
+ vp += sprintf(vp, "et1macaddr=%s", eabuf);
+ vp++;
projects / openwrt / svn-archive / openwrt.git / commitdiff