staging: comedi: ni_labpc: convert printk() to dev_...()

Convert the `printk()` calls in this driver to use the `dev_...()` calls
where possible, or the `pr_...()` calls otherwise.  Remove the ifdefed
out code that prints the EEPROM contents.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 65d5dfcc79417dd772e91b924ae7418213bb217a..8f835b68ad792f299425d1ac233925ff3de2a7db 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -73,9 +73,6 @@ NI manuals:
 
 */
 
-#undef LABPC_DEBUG
-/* #define LABPC_DEBUG    enable debugging messages */
-
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/io.h>
@@ -538,17 +535,9 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
        short lsb, msb;
        int ret;
 
-       printk(KERN_ERR "comedi%d: ni_labpc: %s, io 0x%lx", dev->minor,
-                                                               thisboard->name,
-              iobase);
-       if (irq)
-               printk(", irq %u", irq);
-       if (dma_chan)
-               printk(", dma %u", dma_chan);
-       printk("\n");
-
+       dev_info(dev->class_dev, "ni_labpc: %s\n", thisboard->name);
        if (iobase == 0) {
-               printk(KERN_ERR "io base address is zero!\n");
+               dev_err(dev->class_dev, "io base address is zero!\n");
                return -EINVAL;
        }
        /*  request io regions for isa boards */
@@ -556,7 +545,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
                /* check if io addresses are available */
                if (!request_region(iobase, LABPC_SIZE,
                                    driver_labpc.driver_name)) {
-                       printk(KERN_ERR "I/O port conflict\n");
+                       dev_err(dev->class_dev, "I/O port conflict\n");
                        return -EIO;
                }
        }
@@ -589,7 +578,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
                        isr_flags |= IRQF_SHARED;
                if (request_irq(irq, labpc_interrupt, isr_flags,
                                driver_labpc.driver_name, dev)) {
-                       printk(KERN_ERR "unable to allocate irq %u\n", irq);
+                       dev_err(dev->class_dev, "unable to allocate irq %u\n",
+                               irq);
                        return -EINVAL;
                }
        }
@@ -598,19 +588,21 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 #ifdef CONFIG_ISA_DMA_API
        /* grab dma channel */
        if (dma_chan > 3) {
-               printk(KERN_ERR " invalid dma channel %u\n", dma_chan);
+               dev_err(dev->class_dev, "invalid dma channel %u\n", dma_chan);
                return -EINVAL;
        } else if (dma_chan) {
                /* allocate dma buffer */
                devpriv->dma_buffer =
                    kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA);
                if (devpriv->dma_buffer == NULL) {
-                       printk(KERN_ERR " failed to allocate dma buffer\n");
+                       dev_err(dev->class_dev,
+                               "failed to allocate dma buffer\n");
                        return -ENOMEM;
                }
                if (request_dma(dma_chan, driver_labpc.driver_name)) {
-                       printk(KERN_ERR " failed to allocate dma channel %u\n",
-                              dma_chan);
+                       dev_err(dev->class_dev,
+                               "failed to allocate dma channel %u\n",
+                               dma_chan);
                        return -EINVAL;
                }
                devpriv->dma_chan = dma_chan;
@@ -706,12 +698,6 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 
                for (i = 0; i < EEPROM_SIZE; i++)
                        devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i);
-#ifdef LABPC_DEBUG
-               printk(KERN_ERR " eeprom:");
-               for (i = 0; i < EEPROM_SIZE; i++)
-                       printk(" %i:0x%x ", i, devpriv->eeprom_data[i]);
-               printk("\n");
-#endif
        } else
                s->type = COMEDI_SUBD_UNUSED;
 
@@ -740,8 +726,8 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                irq = it->options[1];
                dma_chan = it->options[2];
 #else
-               printk(KERN_ERR " this driver has not been built with ISA DMA "
-                                                               "support.\n");
+               dev_err(dev->class_dev,
+                       "ni_labpc driver has not been built with ISA DMA support.\n");
                return -EINVAL;
 #endif
                break;
@@ -756,18 +742,14 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                iobase = (unsigned long)devpriv->mite->daq_io_addr;
                irq = mite_irq(devpriv->mite);
 #else
-               printk(KERN_ERR " this driver has not been built with PCI "
-                                                               "support.\n");
+               dev_err(dev->class_dev,
+                       "ni_labpc driver has not been built with PCI support.\n");
                return -EINVAL;
 #endif
                break;
-       case pcmcia_bustype:
-               printk
-                   (" this driver does not support pcmcia cards, use ni_labpc_cs.o\n");
-               return -EINVAL;
-               break;
        default:
-               printk(KERN_ERR "bug! couldn't determine board type\n");
+               dev_err(dev->class_dev,
+                       "ni_labpc: bug! couldn't determine board type\n");
                return -EINVAL;
                break;
        }
@@ -801,7 +783,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
                        }
                }
        }
-       printk(KERN_ERR "no device found\n");
+       dev_err(dev->class_dev, "no device found\n");
        mite_list_devices();
        return -EIO;
 }
@@ -872,8 +854,7 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
        if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
                return MODE_MULT_CHAN_DOWN;
 
-       printk(KERN_ERR "ni_labpc: bug! this should never happen\n");
-
+       pr_err("ni_labpc: bug! cannot determine AI scan mode\n");
        return 0;
 }
 
@@ -928,7 +909,8 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
                        }
                        break;
                default:
-                       printk(KERN_ERR "ni_labpc: bug! in chanlist check\n");
+                       dev_err(dev->class_dev,
+                               "ni_labpc: bug! in chanlist check\n");
                        return 1;
                        break;
                }
@@ -1790,8 +1772,8 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
 
        /*  only allow writes to user area of eeprom */
        if (channel < 16 || channel > 127) {
-               printk
-                   ("eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)");
+               dev_dbg(dev->class_dev,
+                       "eeprom writes are only allowed to channels 16 through 127 (the pointer and user areas)\n");
                return -EINVAL;
        }