mutex_unlock(&dev_priv->dpio_lock);
}
+static int intel_num_dvo_pipes(struct drm_device *dev)
+{
+ struct intel_crtc *crtc;
+ int count = 0;
+
+ for_each_intel_crtc(dev, crtc)
+ count += crtc->active &&
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO);
+
+ return count;
+}
+
static void i9xx_enable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
if (IS_MOBILE(dev) && !IS_I830(dev))
assert_panel_unlocked(dev_priv, crtc->pipe);
- I915_WRITE(reg, dpll);
+ /* Enable DVO 2x clock on both PLLs if necessary */
+ if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
+ /*
+ * It appears to be important that we don't enable this
+ * for the current pipe before otherwise configuring the
+ * PLL. No idea how this should be handled if multiple
+ * DVO outputs are enabled simultaneosly.
+ */
+ dpll |= DPLL_DVO_2X_MODE;
+ I915_WRITE(DPLL(!crtc->pipe),
+ I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
+ }
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
*
* Note! This is for pre-ILK only.
*/
-static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+static void i9xx_disable_pll(struct intel_crtc *crtc)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = crtc->pipe;
+
+ /* Disable DVO 2x clock on both PLLs if necessary */
+ if (IS_I830(dev) &&
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO) &&
+ intel_num_dvo_pipes(dev) == 1) {
+ I915_WRITE(DPLL(PIPE_B),
+ I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
+ I915_WRITE(DPLL(PIPE_A),
+ I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
+ }
+
/* Don't disable pipe or pipe PLLs if needed */
if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
else if (IS_VALLEYVIEW(dev))
vlv_disable_pll(dev_priv, pipe);
else
- i9xx_disable_pll(dev_priv, pipe);
+ i9xx_disable_pll(intel_crtc);
}
if (!IS_GEN2(dev))
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+ if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
}
pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
if (!IS_VALLEYVIEW(dev)) {
+ /*
+ * DPLL_DVO_2X_MODE must be enabled for both DPLLs
+ * on 830. Filter it out here so that we don't
+ * report errors due to that.
+ */
+ if (IS_I830(dev))
+ pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
+
pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
} else {