#include <dt-bindings/leds/common.h>
/ {
- model = "Linksys WHW03 V2 (Velop)";
- compatible = "linksys,whw03v2", "qcom,ipq4019";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_red;
- led-running = &led_green;
- led-upgrade = &led_red;
- };
-
- // The arguments rootfstype and ro are needed
- // to override the default bootargs
- chosen {
- bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- stdout-path = &blsp1_uart1;
- };
-
- soc {
- ess-tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
-
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
+ model = "Linksys WHW03 V2 (Velop)";
+ compatible = "linksys,whw03v2", "qcom,ipq4019";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_red;
+ led-running = &led_green;
+ led-upgrade = &led_red;
+ };
+
+ // The arguments rootfstype and ro are needed
+ // to override the default bootargs
+ chosen {
+ bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
+ stdout-path = &blsp1_uart1;
+ };
+
+ soc {
+ ess-tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+ };
+
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
};
&tlmm {
- mdio_pins: mdio-pinmux {
- mux-1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux-2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- i2c_0_pins: i2c-0-pinmux {
- mux {
- function = "blsp_i2c0";
- pins = "gpio20", "gpio21";
- bias-disable;
- };
- };
-
- serial_0_pins: serial0-pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1-pinmux {
- mux {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi-0-pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux-cs {
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- spi_1_pins: spi-1-pinmux {
- mux-1 {
- function = "blsp_spi1";
- pins = "gpio44", "gpio46","gpio47";
- bias-disable;
- };
-
- mux-2 {
- pins = "gpio31", "gpio45", "gpio49";
- function = "gpio";
- bias-pull-up;
- output-high;
- };
-
- host-interrupt {
- pins = "gpio42";
- function = "gpio";
- input;
- };
- };
-
- wifi_0_pins: wifi0-pinmux {
- btcoexist {
- bias-pull-up;
- drive-strength = <6>;
- function = "gpio";
- output-high;
- pins = "gpio52";
- };
- };
-
- zigbee-0 {
- gpio-hog;
- gpios = <29 GPIO_ACTIVE_HIGH>;
- bias-disable;
- output-low;
- };
-
- zigbee-1 {
- gpio-hog;
- gpios = <50 GPIO_ACTIVE_HIGH>;
- bias-disable;
- input;
- };
-
- bluetooth-enable {
- gpio-hog;
- gpios = <32 GPIO_ACTIVE_HIGH>;
- output-high;
- };
+ mdio_pins: mdio-pinmux {
+ mux-1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux-2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ i2c_0_pins: i2c-0-pinmux {
+ mux {
+ function = "blsp_i2c0";
+ pins = "gpio20", "gpio21";
+ bias-disable;
+ };
+ };
+
+ serial_0_pins: serial0-pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial1-pinmux {
+ mux {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi-0-pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux-cs {
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi_1_pins: spi-1-pinmux {
+ mux-1 {
+ function = "blsp_spi1";
+ pins = "gpio44", "gpio46","gpio47";
+ bias-disable;
+ };
+
+ mux-2 {
+ pins = "gpio31", "gpio45", "gpio49";
+ function = "gpio";
+ bias-pull-up;
+ output-high;
+ };
+
+ host-interrupt {
+ pins = "gpio42";
+ function = "gpio";
+ input;
+ };
+ };
+
+ wifi_0_pins: wifi0-pinmux {
+ btcoexist {
+ bias-pull-up;
+ drive-strength = <6>;
+ function = "gpio";
+ output-high;
+ pins = "gpio52";
+ };
+ };
+
+ zigbee-0 {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ bias-disable;
+ output-low;
+ };
+
+ zigbee-1 {
+ gpio-hog;
+ gpios = <50 GPIO_ACTIVE_HIGH>;
+ bias-disable;
+ input;
+ };
+
+ bluetooth-enable {
+ gpio-hog;
+ gpios = <32 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
};
&mdio {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
};
ðphy0 {
- status = "disabled";
+ status = "disabled";
};
ðphy1 {
- status = "disabled";
+ status = "disabled";
};
ðphy2 {
- status = "disabled";
+ status = "disabled";
};
ðphy3 {
- reg = <0x1b>;
+ reg = <0x1b>;
};
ðphy4 {
- reg = <0x1c>;
+ reg = <0x1c>;
};
&psgmiiphy {
- reg = <0x1d>;
+ reg = <0x1d>;
};
&watchdog {
- status = "okay";
+ status = "okay";
};
&prng {
- status = "okay";
+ status = "okay";
};
&blsp_dma {
- status = "okay";
+ status = "okay";
};
&cryptobam {
- num-channels = <4>;
- qcom,num-ees = <2>;
+ num-channels = <4>;
+ qcom,num-ees = <2>;
- status = "okay";
+ status = "okay";
};
&crypto {
- status = "okay";
+ status = "okay";
};
&blsp1_uart1 {
- status = "okay";
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
+ status = "okay";
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
};
&blsp1_uart2 {
- status = "okay";
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
+ status = "okay";
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
- bluetooth {
- compatible = "csr,8811";
+ bluetooth {
+ compatible = "csr,8811";
- enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
- };
+ enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+ };
};
&blsp1_spi2 {
- pinctrl-0 = <&spi_1_pins>;
- pinctrl-names = "default";
- status = "okay";
+ pinctrl-0 = <&spi_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
- cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- zigbee@0 {
- #address-cells = <1>;
- #size-cells = <0>;
+ zigbee@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
- compatible = "silabs,em3581";
- reg = <0>;
- spi-max-frequency = <12000000>;
- };
+ compatible = "silabs,em3581";
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+ };
};
&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- // RGB LEDs
- pca9633: led-controller {
- compatible = "nxp,pca9633";
- nxp,hw-blink;
- reg = <0x62>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led_red: red@0 {
- label = "red";
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_INDICATOR;
- linux,default-trigger = "none";
- reg = <0>;
- };
-
- led_green: green@1 {
- label = "green";
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- linux,default-trigger = "none";
- reg = <1>;
- };
-
- led_blue: blue@2 {
- label = "blue";
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_INDICATOR;
- linux,default-trigger = "default-on";
- reg = <2>;
- };
- };
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ // RGB LEDs
+ pca9633: led-controller {
+ compatible = "nxp,pca9633";
+ nxp,hw-blink;
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led_red: red@0 {
+ label = "red";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "none";
+ reg = <0>;
+ };
+
+ led_green: green@1 {
+ label = "green";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "none";
+ reg = <1>;
+ };
+
+ led_blue: blue@2 {
+ label = "blue";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "default-on";
+ reg = <2>;
+ };
+ };
};
&usb3_ss_phy {
- status = "okay";
+ status = "okay";
};
&usb3_hs_phy {
- status = "okay";
+ status = "okay";
};
&usb2_hs_phy {
- status = "okay";
+ status = "okay";
};
&nand {
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "MIBIB";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "QSEE";
- reg = <0x200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "CDT";
- reg = <0x300000 0x80000>;
- read-only;
- };
-
- partition@380000 {
- label = "APPSBL";
- reg = <0x380000 0x200000>;
- read-only;
- };
-
- partition@580000 {
- label = "ART";
- reg = <0x580000 0x80000>;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
- read-only;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
-
- precal_art_9000: precal@9000 {
- reg = <0x9000 0x2f20>;
- };
-
- macaddr_gmac0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_gmac1: macaddr@6 {
- reg = <0x6 0x6>;
- };
- };
-
- partition@600000 {
- label = "u_env";
- reg = <0x600000 0x80000>;
- };
-
- partition@680000 {
- label = "s_env";
- reg = <0x680000 0x40000>;
- };
-
- partition@6c0000 {
- label = "devinfo";
- reg = <0x6c0000 0x40000>;
- read-only;
- };
-
- partition@700000 {
- label = "kernel";
- reg = <0x700000 0xa100000>;
- };
-
- partition@d00000 {
- label = "rootfs";
- reg = <0xd00000 0x9b00000>;
- };
-
- partition@a800000 {
- label = "alt_kernel";
- reg = <0xa800000 0xa100000>;
- };
-
- partition@ae00000 {
- label = "alt_rootfs";
- reg = <0xae00000 0x9b00000>;
- };
-
- partition@14900000 {
- label = "sysdiag";
- reg = <0x14900000 0x200000>;
- read-only;
- };
-
- partition@14b00000 {
- label = "syscfg";
- reg = <0x14b00000 0xb500000>;
- read-only;
- };
- };
- };
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "MIBIB";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "QSEE";
+ reg = <0x200000 0x100000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "CDT";
+ reg = <0x300000 0x80000>;
+ read-only;
+ };
+
+ partition@380000 {
+ label = "APPSBL";
+ reg = <0x380000 0x200000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "ART";
+ reg = <0x580000 0x80000>;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ read-only;
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+
+ precal_art_9000: precal@9000 {
+ reg = <0x9000 0x2f20>;
+ };
+
+ macaddr_gmac0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_gmac1: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+ };
+
+ partition@600000 {
+ label = "u_env";
+ reg = <0x600000 0x80000>;
+ };
+
+ partition@680000 {
+ label = "s_env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "devinfo";
+ reg = <0x6c0000 0x40000>;
+ read-only;
+ };
+
+ partition@700000 {
+ label = "kernel";
+ reg = <0x700000 0xa100000>;
+ };
+
+ partition@d00000 {
+ label = "rootfs";
+ reg = <0xd00000 0x9b00000>;
+ };
+
+ partition@a800000 {
+ label = "alt_kernel";
+ reg = <0xa800000 0xa100000>;
+ };
+
+ partition@ae00000 {
+ label = "alt_rootfs";
+ reg = <0xae00000 0x9b00000>;
+ };
+
+ partition@14900000 {
+ label = "sysdiag";
+ reg = <0x14900000 0x200000>;
+ read-only;
+ };
+
+ partition@14b00000 {
+ label = "syscfg";
+ reg = <0x14b00000 0xb500000>;
+ read-only;
+ };
+ };
+ };
};
&pcie0 {
- status = "okay";
-
- perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
- clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- };
- };
+ status = "okay";
+
+ perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
+ clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
};
&qpic_bam {
- status = "okay";
+ status = "okay";
};
&gmac {
- status = "okay";
+ status = "okay";
};
&switch {
- status = "okay";
+ status = "okay";
};
&swport4 {
- status = "okay";
- label = "lan";
+ status = "okay";
+ label = "lan";
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac1>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_gmac1>;
};
&swport5 {
- status = "okay";
- label = "wan";
+ status = "okay";
+ label = "wan";
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac0>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_gmac0>;
};
&wifi0 {
- pinctrl-0 = <&wifi_0_pins>;
- pinctrl-names = "default";
+ pinctrl-0 = <&wifi_0_pins>;
+ pinctrl-names = "default";
- status = "okay";
+ status = "okay";
- qcom,coexist-support = <1>;
- qcom,coexist-gpio-pin = <0x34>;
+ qcom,coexist-support = <1>;
+ qcom,coexist-gpio-pin = <0x34>;
- ieee80211-freq-limit = <2401000 2473000>;
- qcom,ath10k-calibration-variant = "linksys-whw03v2";
+ ieee80211-freq-limit = <2401000 2473000>;
+ qcom,ath10k-calibration-variant = "linksys-whw03v2";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_1000>, <&macaddr_gmac0>;
- mac-address-increment = <1>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ nvmem-cells = <&precal_art_1000>, <&macaddr_gmac0>;
+ mac-address-increment = <1>;
};
&wifi1 {
- status = "okay";
-
- ieee80211-freq-limit = <5170000 5250000>;
- qcom,ath10k-calibration-variant = "linksys-whw03v2";
-
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_5000>, <&macaddr_gmac0>;
- mac-address-increment = <2>;
+ status = "okay";
+
+ ieee80211-freq-limit = <5170000 5250000>;
+ qcom,ath10k-calibration-variant = "linksys-whw03v2";
+
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ nvmem-cells = <&precal_art_5000>, <&macaddr_gmac0>;
+ mac-address-increment = <2>;
};
&wifi2 {
- status = "okay";
+ status = "okay";
- ieee80211-freq-limit = <5735000 5835000>;
- qcom,ath10k-calibration-variant = "linksys-whw03v2";
+ ieee80211-freq-limit = <5735000 5835000>;
+ qcom,ath10k-calibration-variant = "linksys-whw03v2";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_9000>, <&macaddr_gmac0>;
- mac-address-increment = <3>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ nvmem-cells = <&precal_art_9000>, <&macaddr_gmac0>;
+ mac-address-increment = <3>;
};
projects / openwrt / staging / dangole.git / commitdiff