/* Shadow values for legacy userspace support. */
unsigned int rotation;
unsigned int zpos;
+ bool manually_updated;
};
#define to_omap_crtc(x) container_of(x, struct omap_crtc, base)
bool pending;
wait_queue_head_t pending_wait;
struct drm_pending_vblank_event *event;
+ struct delayed_work update_work;
void (*framedone_handler)(void *);
void *framedone_handler_data;
/*
* Manager-ops, callbacks from output when they need to configure
* the upstream part of the video pipe.
- *
- * Most of these we can ignore until we add support for command-mode
- * panels.. for video-mode the crtc-helpers already do an adequate
- * job of sequencing the setup of the video pipe in the proper order
*/
-/* we can probably ignore these until we support command-mode panels: */
static void omap_crtc_dss_start_update(struct omap_drm_private *priv,
enum omap_channel channel)
{
+ priv->dispc_ops->mgr_enable(priv->dispc, channel, true);
}
/* Called only from the encoder enable/disable and suspend/resume handlers. */
static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
{
+ struct omap_crtc_state *omap_state = to_omap_crtc_state(crtc->state);
struct drm_device *dev = crtc->dev;
struct omap_drm_private *priv = dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
if (WARN_ON(omap_crtc->enabled == enable))
return;
+ if (omap_state->manually_updated) {
+ omap_irq_enable_framedone(crtc, enable);
+ omap_crtc->enabled = enable;
+ return;
+ }
+
if (omap_crtc->pipe->output->type == OMAP_DISPLAY_TYPE_HDMI) {
priv->dispc_ops->mgr_enable(priv->dispc, channel, enable);
omap_crtc->enabled = enable;
wake_up(&omap_crtc->pending_wait);
}
+void omap_crtc_flush(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_crtc_state *omap_state = to_omap_crtc_state(crtc->state);
+
+ if (!omap_state->manually_updated)
+ return;
+
+ if (!delayed_work_pending(&omap_crtc->update_work))
+ schedule_delayed_work(&omap_crtc->update_work, 0);
+}
+
+static void omap_crtc_manual_display_update(struct work_struct *data)
+{
+ struct omap_crtc *omap_crtc =
+ container_of(data, struct omap_crtc, update_work.work);
+ struct drm_display_mode *mode = &omap_crtc->pipe->crtc->mode;
+ struct omap_dss_device *dssdev = omap_crtc->pipe->output->next;
+ struct drm_device *dev = omap_crtc->base.dev;
+ const struct omap_dss_driver *dssdrv;
+ int ret;
+
+ if (!dssdev) {
+ dev_err_once(dev->dev, "missing display dssdev!");
+ return;
+ }
+
+ dssdrv = dssdev->driver;
+ if (!dssdrv || !dssdrv->update) {
+ dev_err_once(dev->dev, "missing or incorrect dssdrv!");
+ return;
+ }
+
+ if (dssdrv->sync)
+ dssdrv->sync(dssdev);
+
+ ret = dssdrv->update(dssdev, 0, 0, mode->hdisplay, mode->vdisplay);
+ if (ret < 0) {
+ spin_lock_irq(&dev->event_lock);
+ omap_crtc->pending = false;
+ spin_unlock_irq(&dev->event_lock);
+ wake_up(&omap_crtc->pending_wait);
+ }
+}
+
static void omap_crtc_write_crtc_properties(struct drm_crtc *crtc)
{
struct omap_drm_private *priv = crtc->dev->dev_private;
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_crtc_state *omap_state = to_omap_crtc_state(crtc->state);
int ret;
DBG("%s", omap_crtc->name);
priv->dispc_ops->runtime_get(priv->dispc);
+ /* manual updated display will not trigger vsync irq */
+ if (omap_state->manually_updated)
+ return;
+
spin_lock_irq(&crtc->dev->event_lock);
drm_crtc_vblank_on(crtc);
ret = drm_crtc_vblank_get(crtc);
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
DBG("%s", omap_crtc->name);
}
spin_unlock_irq(&crtc->dev->event_lock);
+ cancel_delayed_work(&omap_crtc->update_work);
+
+ if (!omap_crtc_wait_pending(crtc))
+ dev_warn(dev->dev, "manual display update did not finish!");
+
drm_crtc_vblank_off(crtc);
priv->dispc_ops->runtime_put(priv->dispc);
drm_display_mode_to_videomode(mode, &omap_crtc->vm);
}
+static bool omap_crtc_is_manually_updated(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_dss_device *display = omap_crtc->pipe->output->next;
+
+ if (!display)
+ return false;
+
+ if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+ DBG("detected manually updated display!");
+ return true;
+ }
+
+ return false;
+}
+
static int omap_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
/* Mirror new values for zpos and rotation in omap_crtc_state */
omap_crtc_state->zpos = pri_state->zpos;
omap_crtc_state->rotation = pri_state->rotation;
+
+ /* Check if this CRTC is for a manually updated display */
+ omap_crtc_state->manually_updated = omap_crtc_is_manually_updated(crtc);
}
return 0;
{
struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct omap_crtc_state *omap_crtc_state = to_omap_crtc_state(crtc->state);
int ret;
if (crtc->state->color_mgmt_changed) {
DBG("%s: GO", omap_crtc->name);
+ if (omap_crtc_state->manually_updated) {
+ /* send new image for page flips and modeset changes */
+ spin_lock_irq(&crtc->dev->event_lock);
+ omap_crtc_flush(crtc);
+ omap_crtc_arm_event(crtc);
+ spin_unlock_irq(&crtc->dev->event_lock);
+ return;
+ }
+
ret = drm_crtc_vblank_get(crtc);
WARN_ON(ret != 0);
state->zpos = current_state->zpos;
state->rotation = current_state->rotation;
+ state->manually_updated = current_state->manually_updated;
return &state->base;
}
omap_crtc->channel = channel;
omap_crtc->name = channel_names[channel];
+ /*
+ * We want to refresh manually updated displays from dirty callback,
+ * which is called quite often (e.g. for each drawn line). This will
+ * be used to do the display update asynchronously to avoid blocking
+ * the rendering process and merges multiple dirty calls into one
+ * update if they arrive very fast. We also call this function for
+ * atomic display updates (e.g. for page flips), which means we do
+ * not need extra locking. Atomic updates should be synchronous, but
+ * need to wait for the framedone interrupt anyways.
+ */
+ INIT_DELAYED_WORK(&omap_crtc->update_work,
+ omap_crtc_manual_display_update);
+
ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
&omap_crtc_funcs, NULL);
if (ret < 0) {