+#endif /* BCM47XXSFLASH */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -529,6 +529,7 @@ struct bcma_sflash {
- u32 size;
+@@ -544,6 +544,7 @@ struct bcma_nflash {
+ bool boot; /* This is the flash the SoC boots from */
struct mtd_info *mtd;
+ void *priv;
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -549,6 +549,15 @@ static int ssb_devices_register(struct s
+@@ -545,6 +545,15 @@ static int ssb_devices_register(struct s
dev_idx++;
}
err = platform_device_register(&ssb_pflash_dev);
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -220,6 +220,7 @@ extern u32 ssb_chipco_watchdog_timer_set
+@@ -231,6 +231,7 @@ extern u32 ssb_chipco_watchdog_timer_set
/* driver_chipcommon_sflash.c */
#ifdef CONFIG_SSB_SFLASH
int ssb_sflash_init(struct ssb_chipcommon *cc);
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
-@@ -520,19 +521,6 @@ struct bcma_pflash {
+@@ -523,19 +524,6 @@ struct bcma_pflash {
u32 window_size;
};
#ifdef CONFIG_BCMA_NFLASH
struct mtd_info;
-@@ -566,7 +554,7 @@ struct bcma_drv_cc {
+@@ -570,7 +558,7 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
#ifdef CONFIG_BCMA_SFLASH
crystalfreq = simple_strtoul(buf, NULL, 0);
#endif
}
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -98,14 +98,14 @@ static inline bool ssb_gige_must_flush_p
- }
-
- #ifdef CONFIG_BCM47XX
--#include <asm/mach-bcm47xx/nvram.h>
-+#include <bcm47xx_nvram.h>
- /* Get the device MAC address */
- static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
- char buf[20];
-- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-+ if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
- return;
-- nvram_parse_macaddr(buf, macaddr);
-+ bcm47xx_nvram_parse_macaddr(buf, macaddr);
- }
- #else
- static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+++ /dev/null
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -26,6 +26,7 @@ struct ssb_sprom_core_pwr_info {
-
- struct ssb_sprom {
- u8 revision;
-+ u8 country_code; /* Country Code */
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
-@@ -36,7 +37,6 @@ struct ssb_sprom {
- u16 board_rev; /* Board revision number from SPROM. */
- u16 board_num; /* Board number from SPROM. */
- u16 board_type; /* Board type from SPROM. */
-- u8 country_code; /* Country Code */
- char alpha2[2]; /* Country Code as two chars like EU or US */
- u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
- u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5715S 0x1679
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
- return 0;
- }
-
--#ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
- /* Get the device MAC address */
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
--{
-- char buf[20];
-- if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-- return;
-- bcm47xx_nvram_parse_macaddr(buf, macaddr);
--}
--#else
--static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
- {
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (!dev)
-+ return -ENODEV;
-+
-+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
-+ return 0;
- }
--#endif
-
- extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
- struct pci_dev *pdev);
-@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
- {
- return 0;
- }
-+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+ return -ENODEV;
-+}
-
- #endif /* CONFIG_SSB_DRIVER_GIGE */
- #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
create mode 100644 drivers/net/ethernet/broadcom/bgmac.c
create mode 100644 drivers/net/ethernet/broadcom/bgmac.h
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -280,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
- }
-
- /* query bus clock frequency for PMU-enabled chipcommon */
--static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
-+u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
- {
- struct bcma_bus *bus = cc->core->bus;
-
-@@ -309,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
- }
- return BCMA_CC_PMU_HT_CLOCK;
- }
-+EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
-
- /* query cpu clock frequency for PMU-enabled chipcommon */
- u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -121,4 +121,13 @@ config BNX2X
+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
+
+#endif /* _BGMAC_H */
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -626,4 +626,6 @@ extern void bcma_chipco_regctl_maskset(s
- u32 offset, u32 mask, u32 set);
- extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
-
-+extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
-+
- #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
-@@ -376,7 +376,7 @@ static void ssb_pcicore_init_hostmode(st
+@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
+
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
+ case 43222:
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU alp clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU cpu clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ case 0x5354:
+ return 120000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU controlclock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
+- /* TODO: BCM43222 requires updating PLLs too */
+- return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,140 @@
static inline u32 mips_read32(struct ssb_mipscore *mcore,
u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -189,34 +210,43 @@ static void ssb_mips_serial_init(struct
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
}
u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+@@ -257,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -305,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
+- ssb_dprintk(KERN_INFO PFX
+- "can not register watchdog device, err: %li\n",
+- PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -549,6 +549,14 @@ static int ssb_devices_register(struct s
+@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
+
+ err = ssb_gpio_unregister(bus);
+ if (err == -EBUSY)
+- ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
++ ssb_dbg("Some GPIOs are still in use\n");
+ else if (err)
+- ssb_dprintk(KERN_ERR PFX
+- "Can not unregister GPIO driver: %i\n", err);
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -549,6 +545,14 @@ static int ssb_devices_register(struct s
dev_idx++;
}
return 0;
error:
/* Unwind the already registered devices. */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -217,6 +217,21 @@ extern u32 ssb_chipco_watchdog_timer_set
- u32 ticks);
- extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+@@ -817,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+ ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
+- ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
+- ssb_dprintk(KERN_ERR PFX
+- "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
+ err = ssb_fetch_invariants(bus, get_invariants);
+ if (err) {
+ ssb_bus_may_powerdown(bus);
+@@ -870,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
-+/* driver_chipcommon_sflash.c */
-+#ifdef CONFIG_SSB_SFLASH
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#else
-+static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+ pr_err("Serial flash not supported\n");
-+ return 0;
-+}
-+#endif /* CONFIG_SSB_SFLASH */
-+
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+extern struct platform_device ssb_pflash_dev;
-+#endif
-+
- #ifdef CONFIG_SSB_DRIVER_EXTIF
- extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
- extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
---- a/include/linux/ssb/ssb_driver_mips.h
-+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
- {
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -895,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -917,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -936,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1331,7 +1334,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
}
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1354,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
-+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1462,15 +1465,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
+{
-+ return 0;
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
+}
+
- #endif /* CONFIG_SSB_DRIVER_MIPS */
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
- #endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
return (s8)gain;
}
+
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
- int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+- int i;
+- u16 v;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
SSB_SPROM1_ITSSI_A_SHIFT);
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
SSB_SPROM1_AGAIN_A,
SSB_SPROM1_AGAIN_A_SHIFT);
}
/* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 4) {
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
+- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+- bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -9,16 +9,27 @@
+ #define PFX "ssb: "
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -217,6 +228,21 @@ extern u32 ssb_chipco_watchdog_timer_set
+ u32 ticks);
+ extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+
++/* driver_chipcommon_sflash.c */
++#ifdef CONFIG_SSB_SFLASH
++int ssb_sflash_init(struct ssb_chipcommon *cc);
++#else
++static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
++{
++ pr_err("Serial flash not supported\n");
++ return 0;
++}
++#endif /* CONFIG_SSB_SFLASH */
++
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+ extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+
+ struct ssb_sprom {
+ u8 revision;
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+@@ -340,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -289,11 +289,11 @@
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
struct platform_device bcma_nflash_dev = {
.name = "bcma_nflash",
.num_resources = 0,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
+- case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
+- case BCMA_CHIP_ID_BCM4313:
+- case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
+ /* always 20Mhz */
+ return 20000 * 1000;
+- case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
+ /* always 25Mhz */
+ return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
+ default:
+ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -264,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+ }
+
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+
+@@ -293,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+ }
+ return BCMA_CC_PMU_HT_CLOCK;
+ }
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
+@@ -372,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
+@@ -393,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
+@@ -426,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
+@@ -460,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 0x88888815);
+ }
+
+- tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
+@@ -496,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -5,11 +5,11 @@
return cap_ptr;
/* check if the capability pointer field exists */
-@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
+@@ -401,6 +404,8 @@ void bcma_core_pci_hostmode_init(struct
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+@@ -426,7 +431,7 @@ void bcma_core_pci_hostmode_init(struct
/* Reset RC */
usleep_range(3000, 5000);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
BCMA_CORE_PCI_CTL_RST_OE);
-@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
+@@ -488,6 +493,17 @@ void bcma_core_pci_hostmode_init(struct
bcma_core_pci_enable_crs(pc);
/* Enable PCI bridge BAR0 memory & master access */
tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
-@@ -576,7 +590,7 @@ int bcma_core_pci_plat_dev_init(struct p
+@@ -576,7 +592,7 @@ int bcma_core_pci_plat_dev_init(struct p
pr_info("PCI: Fixing up device %s\n", pci_name(dev));
/* Fix up interrupt lines */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
return 0;
-@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
+@@ -595,6 +611,6 @@ int bcma_core_pci_pcibios_map_irq(const
pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
pci_ops);
{
struct bcma_device *core;
-@@ -149,6 +149,14 @@ static int bcma_register_cores(struct bc
+@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+ continue;
+ }
+
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+@@ -149,6 +154,14 @@ static int bcma_register_cores(struct bc
dev_id++;
}
#ifdef CONFIG_BCMA_SFLASH
if (bus->drv_cc.sflash.present) {
err = platform_device_register(&bcma_sflash_dev);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+ }
+
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -134,6 +134,7 @@ struct bcma_host_ops {
+ #define BCMA_CORE_I2S 0x834
+ #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_ARM_CR4 0x83e
+ #define BCMA_CORE_DEFAULT 0xFFF
+
+ #define BCMA_MAX_NR_CORES 16
+@@ -173,6 +174,60 @@ struct bcma_host_ops {
+ #define BCMA_CHIP_ID_BCM53572 53572
+ #define BCMA_PKG_ID_BCM47188 9
+
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
++
+ struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -27,7 +27,7 @@
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -606,6 +610,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -528,6 +532,7 @@ struct bcma_sflash {
+ u32 size;
+
+ struct mtd_info *mtd;
++ void *priv;
+ };
+ #endif
+
+@@ -606,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+@@ -634,4 +641,6 @@ extern void bcma_chipco_regctl_maskset(s
+ u32 offset, u32 mask, u32 set);
+ extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -28,6 +28,7 @@
/* PCIE Root Capability Register bits (Host mode only) */
#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
- struct bcma_bus *bus = cc->core->bus;
-
- switch (bus->chipinfo.id) {
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM43224:
-+ case BCMA_CHIP_ID_BCM43225:
-+ case BCMA_CHIP_ID_BCM43227:
-+ case BCMA_CHIP_ID_BCM43228:
-+ case BCMA_CHIP_ID_BCM4331:
-+ case BCMA_CHIP_ID_BCM43421:
-+ case BCMA_CHIP_ID_BCM43428:
-+ case BCMA_CHIP_ID_BCM43431:
- case BCMA_CHIP_ID_BCM4716:
-- case BCMA_CHIP_ID_BCM4748:
- case BCMA_CHIP_ID_BCM47162:
-- case BCMA_CHIP_ID_BCM4313:
-- case BCMA_CHIP_ID_BCM5357:
-+ case BCMA_CHIP_ID_BCM4748:
- case BCMA_CHIP_ID_BCM4749:
-+ case BCMA_CHIP_ID_BCM5357:
- case BCMA_CHIP_ID_BCM53572:
-+ case BCMA_CHIP_ID_BCM6362:
- /* always 20Mhz */
- return 20000 * 1000;
-- case BCMA_CHIP_ID_BCM5356:
- case BCMA_CHIP_ID_BCM4706:
-+ case BCMA_CHIP_ID_BCM5356:
- /* always 25Mhz */
- return 25000 * 1000;
-+ case BCMA_CHIP_ID_BCM43460:
-+ case BCMA_CHIP_ID_BCM4352:
-+ case BCMA_CHIP_ID_BCM4360:
-+ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
-+ return 40000 * 1000;
-+ else
-+ return 20000 * 1000;
- default:
- bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -372,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
-
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM4331:
-@@ -393,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
- 0x03000a08);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM43224:
-@@ -426,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 0x88888815);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM4716:
-@@ -460,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 0x88888815);
- }
-
-- tmp = 3 << 9;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
- break;
-
- case BCMA_CHIP_ID_BCM43227:
-@@ -496,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 0x88888815);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
- default:
- bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
- #define BCMA_CORE_I2S 0x834
- #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
- #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
- #define BCMA_CORE_DEFAULT 0xFFF
-
- #define BCMA_MAX_NR_CORES 16
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -37,6 +37,7 @@
+++ /dev/null
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
- return (s8)gain;
- }
-
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+ SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-- if (out->revision >= 2)
-- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
-+ if (out->revision >= 2)
-+ sprom_extract_r23(out, in);
- }
-
- /* Revs 4 5 and 8 have partially shared layout */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
- #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
- #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
- #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
--#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
--#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
--#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
--#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
--#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-+#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
-+#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
-+#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
- #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
- #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
- #define SSB_SPROM4_AGAIN0_SHIFT 0
--- /dev/null
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
+
+ if (cc->dev->id.revision >= 11)
+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_
+ case 43222:
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU alp clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU cpu clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ case 0x5354:
+ return 120000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU controlclock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
+- /* TODO: BCM43222 requires updating PLLs too */
+- return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -167,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -286,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -334,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
+- ssb_dprintk(KERN_INFO PFX
+- "can not register watchdog device, err: %li\n",
+- PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus *
+
+ err = ssb_gpio_unregister(bus);
+ if (err == -EBUSY)
+- ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n");
++ ssb_dbg("Some GPIOs are still in use\n");
+ else if (err)
+- ssb_dprintk(KERN_ERR PFX
+- "Can not unregister GPIO driver: %i\n", err);
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -825,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+ ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
+- ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
+- ssb_dprintk(KERN_ERR PFX
+- "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
+ err = ssb_fetch_invariants(bus, get_invariants);
+ if (err) {
+ ssb_bus_may_powerdown(bus);
+@@ -878,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -903,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -925,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -944,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1339,7 +1334,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1362,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1470,15 +1465,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 4) {
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
+- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+- bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -9,16 +9,27 @@
+ #define PFX "ssb: "
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+
+ struct ssb_sprom {
+ u8 revision;
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+@@ -340,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
++#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
++#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
++#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
+ #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM4_AGAIN0_SHIFT 0
+++ /dev/null
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
- return value;
- }
-
--static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
-+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
- {
- if (cc->capabilities & BCMA_CC_CAP_PMU)
- return bcma_pmu_get_alp_clock(cc);
-
- return 20000000;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
-
- static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
- {
-@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
-
- return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
-
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
-
- return res;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
-
- /*
- * If the bit is set to 0, chipcommon controlls this GPIO,
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
- struct bcma_bus *bus = cc->core->bus;
-
- switch (bus->chipinfo.id) {
-+ case BCMA_CHIP_ID_BCM4313:
-+ case BCMA_CHIP_ID_BCM43224:
-+ case BCMA_CHIP_ID_BCM43225:
-+ case BCMA_CHIP_ID_BCM43227:
-+ case BCMA_CHIP_ID_BCM43228:
-+ case BCMA_CHIP_ID_BCM4331:
-+ case BCMA_CHIP_ID_BCM43421:
-+ case BCMA_CHIP_ID_BCM43428:
-+ case BCMA_CHIP_ID_BCM43431:
- case BCMA_CHIP_ID_BCM4716:
-- case BCMA_CHIP_ID_BCM4748:
- case BCMA_CHIP_ID_BCM47162:
-- case BCMA_CHIP_ID_BCM4313:
-- case BCMA_CHIP_ID_BCM5357:
-+ case BCMA_CHIP_ID_BCM4748:
- case BCMA_CHIP_ID_BCM4749:
-+ case BCMA_CHIP_ID_BCM5357:
- case BCMA_CHIP_ID_BCM53572:
-+ case BCMA_CHIP_ID_BCM6362:
- /* always 20Mhz */
- return 20000 * 1000;
-- case BCMA_CHIP_ID_BCM5356:
- case BCMA_CHIP_ID_BCM4706:
-+ case BCMA_CHIP_ID_BCM5356:
- /* always 25Mhz */
- return 25000 * 1000;
-+ case BCMA_CHIP_ID_BCM43460:
-+ case BCMA_CHIP_ID_BCM4352:
-+ case BCMA_CHIP_ID_BCM4360:
-+ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
-+ return 40000 * 1000;
-+ else
-+ return 20000 * 1000;
- default:
- bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
-
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM4331:
-@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
- 0x03000a08);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM43224:
-@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 0x88888815);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-
- case BCMA_CHIP_ID_BCM4716:
-@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- 0x88888815);
- }
-
-- tmp = 3 << 9;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
- break;
-
- case BCMA_CHIP_ID_BCM43227:
-@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
- 0x88888815);
- }
-- tmp = 1 << 10;
-+ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
- default:
- bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -104,6 +104,7 @@
- #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
- #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
- #define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
-+#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
- #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
- #define BCMA_CC_JCMD_START 0x80000000
- #define BCMA_CC_JCMD_BUSY 0x80000000
-@@ -607,6 +608,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
-
- extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
-
-+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
-+
- void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-
- u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
+ return value;
+ }
+
+-static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+ return bcma_pmu_get_alp_clock(cc);
+
+ return 20000000;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+
+ static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+ {
+@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+
+ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+
+ return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+
+ /*
+ * If the bit is set to 0, chipcommon controlls this GPIO,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM4313:
++ case BCMA_CHIP_ID_BCM43224:
++ case BCMA_CHIP_ID_BCM43225:
++ case BCMA_CHIP_ID_BCM43227:
++ case BCMA_CHIP_ID_BCM43228:
++ case BCMA_CHIP_ID_BCM4331:
++ case BCMA_CHIP_ID_BCM43421:
++ case BCMA_CHIP_ID_BCM43428:
++ case BCMA_CHIP_ID_BCM43431:
+ case BCMA_CHIP_ID_BCM4716:
+- case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM47162:
+- case BCMA_CHIP_ID_BCM4313:
+- case BCMA_CHIP_ID_BCM5357:
++ case BCMA_CHIP_ID_BCM4748:
+ case BCMA_CHIP_ID_BCM4749:
++ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
++ case BCMA_CHIP_ID_BCM6362:
+ /* always 20Mhz */
+ return 20000 * 1000;
+- case BCMA_CHIP_ID_BCM5356:
+ case BCMA_CHIP_ID_BCM4706:
++ case BCMA_CHIP_ID_BCM5356:
+ /* always 25Mhz */
+ return 25000 * 1000;
++ case BCMA_CHIP_ID_BCM43460:
++ case BCMA_CHIP_ID_BCM4352:
++ case BCMA_CHIP_ID_BCM4360:
++ if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++ return 40000 * 1000;
++ else
++ return 20000 * 1000;
+ default:
+ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4331:
+@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 0x03000a08);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM43224:
+@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+
+ case BCMA_CHIP_ID_BCM4716:
+@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 0x88888815);
+ }
+
+- tmp = 3 << 9;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ break;
+
+ case BCMA_CHIP_ID_BCM43227:
+@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 0x88888815);
+ }
+- tmp = 1 << 10;
++ tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+ continue;
+ }
+
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+ }
+
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -134,6 +134,7 @@ struct bcma_host_ops {
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
---- a/include/linux/bcma/bcma_regs.h
-+++ b/include/linux/bcma/bcma_regs.h
-@@ -37,6 +37,7 @@
- #define BCMA_IOST_BIST_DONE 0x8000
- #define BCMA_RESET_CTL 0x0800
- #define BCMA_RESET_CTL_RESET 0x0001
-+#define BCMA_RESET_ST 0x0804
+@@ -173,6 +174,60 @@ struct bcma_host_ops {
+ #define BCMA_CHIP_ID_BCM53572 53572
+ #define BCMA_PKG_ID_BCM47188 9
- /* BCMA PCI config space registers. */
- #define BCMA_PCI_PMCSR 0x44
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
++
+ struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -316,6 +316,9 @@
+@@ -104,6 +104,7 @@
+ #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
+ #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
+ #define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
+ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
+ #define BCMA_CC_JCMD_START 0x80000000
+ #define BCMA_CC_JCMD_BUSY 0x80000000
+@@ -315,6 +316,9 @@
#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+@@ -607,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+
+ extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
++
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+ u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+--- a/include/linux/bcma/bcma_regs.h
++++ b/include/linux/bcma/bcma_regs.h
+@@ -37,6 +37,7 @@
+ #define BCMA_IOST_BIST_DONE 0x8000
+ #define BCMA_RESET_CTL 0x0800
+ #define BCMA_RESET_CTL_RESET 0x0001
++#define BCMA_RESET_ST 0x0804
+
+ /* BCMA PCI config space registers. */
+ #define BCMA_PCI_PMCSR 0x44
projects / openwrt / staging / zorun.git / commitdiff