ASoC: qcom: sdm845: handle soundwire stream
authorSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tue, 17 Mar 2020 15:12:32 +0000 (15:12 +0000)
committerMark Brown <broonie@kernel.org>
Wed, 18 Mar 2020 21:25:53 +0000 (21:25 +0000)
In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/qcom/Kconfig
sound/soc/qcom/sdm845.c

index 6530d2462a9e0b29cc3c6b1a2cad8d5677f21930..f51b28d1b94d87b5fe31c4b70f4ce532ed884850 100644 (file)
@@ -99,7 +99,7 @@ config SND_SOC_MSM8996
 
 config SND_SOC_SDM845
        tristate "SoC Machine driver for SDM845 boards"
-       depends on QCOM_APR && CROS_EC && I2C
+       depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE
        select SND_SOC_QDSP6
        select SND_SOC_QCOM_COMMON
        select SND_SOC_RT5663
index 3ac02204a7069df6927c1161920354b84be54209..67a55edf755fe275cdec31a11bad602e4d5b32c4 100644 (file)
@@ -11,6 +11,7 @@
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 #include <uapi/linux/input-event-codes.h>
 #include "common.h"
 #include "qdsp6/q6afe.h"
 struct sdm845_snd_data {
        struct snd_soc_jack jack;
        bool jack_setup;
+       bool stream_prepared[SLIM_MAX_RX_PORTS];
        struct snd_soc_card *card;
        uint32_t pri_mi2s_clk_count;
        uint32_t sec_mi2s_clk_count;
        uint32_t quat_tdm_clk_count;
+       struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS];
 };
 
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
@@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
        struct snd_soc_pcm_runtime *rtd = substream->private_data;
        struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
        struct snd_soc_dai *codec_dai;
+       struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
        u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+       struct sdw_stream_runtime *sruntime;
        u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
        int ret = 0, i;
 
        for_each_rtd_codec_dais(rtd, i, codec_dai) {
+               sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
+                                                     substream->stream);
+               if (sruntime != ERR_PTR(-ENOTSUPP))
+                       pdata->sruntime[cpu_dai->id] = sruntime;
+
                ret = snd_soc_dai_get_channel_map(codec_dai,
                                &tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
 
@@ -425,8 +435,65 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
        }
 }
 
+static int sdm845_snd_prepare(struct snd_pcm_substream *substream)
+{
+       struct snd_soc_pcm_runtime *rtd = substream->private_data;
+       struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+       struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+       struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+       int ret;
+
+       if (!sruntime)
+               return 0;
+
+       if (data->stream_prepared[cpu_dai->id]) {
+               sdw_disable_stream(sruntime);
+               sdw_deprepare_stream(sruntime);
+               data->stream_prepared[cpu_dai->id] = false;
+       }
+
+       ret = sdw_prepare_stream(sruntime);
+       if (ret)
+               return ret;
+
+       /**
+        * NOTE: there is a strict hw requirement about the ordering of port
+        * enables and actual WSA881x PA enable. PA enable should only happen
+        * after soundwire ports are enabled if not DC on the line is
+        * accumulated resulting in Click/Pop Noise
+        * PA enable/mute are handled as part of codec DAPM and digital mute.
+        */
+
+       ret = sdw_enable_stream(sruntime);
+       if (ret) {
+               sdw_deprepare_stream(sruntime);
+               return ret;
+       }
+       data->stream_prepared[cpu_dai->id] = true;
+
+       return ret;
+}
+
+static int sdm845_snd_hw_free(struct snd_pcm_substream *substream)
+{
+       struct snd_soc_pcm_runtime *rtd = substream->private_data;
+       struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+       struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+       struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+       if (sruntime && data->stream_prepared[cpu_dai->id]) {
+               sdw_disable_stream(sruntime);
+               sdw_deprepare_stream(sruntime);
+               data->stream_prepared[cpu_dai->id] = false;
+       }
+
+       return 0;
+}
+
 static const struct snd_soc_ops sdm845_be_ops = {
        .hw_params = sdm845_snd_hw_params,
+       .hw_free = sdm845_snd_hw_free,
+       .prepare = sdm845_snd_prepare,
        .startup = sdm845_snd_startup,
        .shutdown = sdm845_snd_shutdown,
 };