ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt"
;;
+tl-wpa8630)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
+ ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
+ ;;
tl-wr802n-v1)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
;;
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
-wpa8630)
- ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
- ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ;;
wpn824n)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
+ tl-wpa8630)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+ ;;
tl-wr1043nd)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
- wpa8630)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
- ;;
wpj344)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"
mr12|\
mr16|\
nbg6616|\
- wpa8630)
+ tl-wpa8630)
status_led="$board:green:power"
;;
ap96)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ tl-wpa8630)
+ ath10kcal_extract "ART" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ;;
unifiac-lite | \
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
- wpa8630)
- ath10kcal_extract "ART" 20480 2116
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
- ;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")
*"TL-WDR6500 v2")
name="tl-wdr6500-v2"
;;
+ *TL-WPA8630)
+ name="tl-wpa8630"
+ ;;
*TL-WR741ND)
name="tl-wr741nd"
;;
*"WNR1000 V2")
name="wnr1000-v2"
;;
- *WPA8630)
- name="wpa8630"
- ;;
*WPN824N)
name="wpn824n"
;;
tl-wdr4300|\
tl-wdr4900-v2|\
tl-wdr6500-v2|\
+ tl-wpa8630|\
tl-wr1041n-v2|\
tl-wr1043nd-v2|\
tl-wr1043nd|\
tl-wr842n-v3|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
- tl-wr941nd|\
- wpa8630)
+ tl-wr941nd)
local magic_ver="0100"
case "$board" in
CONFIG_ATH79_MACH_TL_WDR3500=y
CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
+CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPA8630=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ342=y
CONFIG_ATH79_MACH_WPJ344=y
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
-config ATH79_MACH_WPA8630
- bool "TP-Link WPA8630 support"
+config ATH79_MACH_TL_WPA8630
+ bool "TP-Link TL-WPA8630 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o
obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
-obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
--- /dev/null
+/*
+ * TP-Link TL-WPA8630 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+
+#define TL_WPA8630_KEYS_POLL_INTERVAL 20
+#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * TL_WPA8630_KEYS_POLL_INTERVAL)
+
+#define TL_WPA8630_GPIO_LED_POWER 1
+#define TL_WPA8630_GPIO_LED_LAN 5
+#define TL_WPA8630_GPIO_LED_WLAN 19
+#define TL_WPA8630_GPIO_LED_WLAN5 21
+
+#define TL_WPA8630_GPIO_BTN_RESET 2
+#define TL_WPA8630_GPIO_BTN_RFKILL 8
+#define TL_WPA8630_GPIO_BTN_LED 6
+#define TL_WPA8630_GPIO_BTN_PAIR 7
+
+#define TL_WPA8630_MAC0_OFFSET 0x0000
+#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WPA8630_PCI_CALDATA_OFFSET 0x5000
+
+static struct flash_platform_data tl_wpa8630_flash_data = {
+ .type = "s25fl064k",
+};
+
+static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wpa8630:green:power",
+ .gpio = TL_WPA8630_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "tl-wpa8630:green:lan",
+ .gpio = TL_WPA8630_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tl-wpa8630:green:wlan",
+ .gpio = TL_WPA8630_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tl-wpa8630:green:wlan5",
+ .gpio = TL_WPA8630_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WPA8630_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WPA8630_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "LED",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WPA8630_GPIO_BTN_LED,
+ .active_low = 1,
+ },
+ {
+ .desc = "Pair",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WPA8630_GPIO_BTN_PAIR,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
+static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data tl_wpa8630_qca8337_data = {
+ .pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info tl_wpa8630_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &tl_wpa8630_qca8337_data,
+ },
+};
+
+static void __init tl_wpa8630_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&tl_wpa8630_flash_data);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + TL_WPA8630_MAC0_OFFSET, 0);
+
+ platform_device_register(&ath79_mdio0_device);
+
+ mdiobus_register_board_info(tl_wpa8630_mdio0_info,
+ ARRAY_SIZE(tl_wpa8630_mdio0_info));
+
+ /* GMAC0 is connected to an AR8337 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_mask = ~BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac);
+
+ ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio),
+ tl_wpa8630_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wpa8630_gpio_keys),
+ tl_wpa8630_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-Link TL-WPA8630",
+ tl_wpa8630_setup);
+++ /dev/null
-/*
- * TP-Link WPA8630 board support
- *
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-
-#define WPA8630_KEYS_POLL_INTERVAL 20
-#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
-
-#define WPA8630_GPIO_LED_POWER 1
-#define WPA8630_GPIO_LED_LAN 5
-#define WPA8630_GPIO_LED_WLAN 19
-#define WPA8630_GPIO_LED_WLAN5 21
-
-#define WPA8630_GPIO_BTN_RESET 2
-#define WPA8630_GPIO_BTN_RFKILL 8
-#define WPA8630_GPIO_BTN_0 6
-#define WPA8630_GPIO_BTN_1 7
-
-#define WPA8630_MAC0_OFFSET 0x0000
-#define WPA8630_WMAC_CALDATA_OFFSET 0x1000
-#define WPA8630_PCI_CALDATA_OFFSET 0x5000
-
-static struct flash_platform_data wpa8630_flash_data = {
- .type = "s25fl064k",
-};
-
-static struct gpio_led wpa8630_leds_gpio[] __initdata = {
- {
- .name = "wpa8630:green:power",
- .gpio = WPA8630_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "wpa8630:green:lan",
- .gpio = WPA8630_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "wpa8630:green:wlan",
- .gpio = WPA8630_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "wpa8630:green:wlan5",
- .gpio = WPA8630_GPIO_LED_WLAN5,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPA8630_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPA8630_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
- {
- .desc = "LED",
- .type = EV_KEY,
- .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPA8630_GPIO_BTN_0,
- .active_low = 1,
- },
- {
- .desc = "Pair",
- .type = EV_KEY,
- .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPA8630_GPIO_BTN_1,
- .active_low = 1,
- },
-};
-
-/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
-static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data wpa8630_qca8337_data = {
- .pad0_cfg = &wpa8630_qca8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info wpa8630_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .phy_addr = 0,
- .platform_data = &wpa8630_qca8337_data,
- },
-};
-
-static void __init wpa8630_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&wpa8630_flash_data);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + WPA8630_MAC0_OFFSET, 0);
-
- platform_device_register(&ath79_mdio0_device);
-
- mdiobus_register_board_info(wpa8630_mdio0_info,
- ARRAY_SIZE(wpa8630_mdio0_info));
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = ~BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_eth(0);
-
- ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
-
- ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
- wpa8630_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpa8630_gpio_keys),
- wpa8630_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
- wpa8630_setup);
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
+ ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */
- ATH79_MACH_WPA8630, /* TP-Link WPA8630 */
ATH79_MACH_WPE72, /* Compex WPE72 */
ATH79_MACH_WPJ342, /* Compex WPJ342 */
ATH79_MACH_WPJ344, /* Compex WPJ344 */
endef
TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
+define Device/tl-wpa8630
+ $(Device/tplink-8mlzma)
+ DEVICE_TITLE := TP-LINK TL-WPA8630
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := TL-WPA8630
+ DEVICE_PROFILE := TL-WPA8630
+ TPLINK_HWID := 0x86300001
+ MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
+ IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
+endef
+TARGET_DEVICES += tl-wpa8630
+
define Device/tl-wr703n-v1
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR703N
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
-
-define Device/wpa8630
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK WPA8630
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME := WPA8630
- DEVICE_PROFILE := WPA8630
- TPLINK_HWID := 0x86300001
- MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
-endef
-TARGET_DEVICES += wpa8630
projects / openwrt / staging / blocktrron.git / commitdiff