sunxi: add support for Olinuxino A10 LIME

Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39222

diff --git a/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
new file mode 100644 (file)
index 0000000..fa5ebbd
--- /dev/null
+++ b/target/linux/sunxi/files/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+       model = "Olimex A10-Olinuxino LIME";
+       compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+       soc@01c00000 {
+               emac: ethernet@01c0b000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&emac_pins_a>;
+                       phy = <&phy1>;
+                       status = "okay";
+               };
+
+               mdio@01c0b080 {
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+
+               sdc0: sdc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&sdc0_pins_a>;
+                       pinctrl-1 = <&mmc0_cd_pin_olinuxino>;
+                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-mode = <1>;
+                       status = "okay";
+               };
+
+               sata: ahci@01c18000 {
+                       pwr-supply = <&reg_ahci_5v>;
+                       status = "okay";
+               };
+
+               pinctrl@01c20800 {
+                       ahci_pwr_pin: ahci_pwr_pin@0 {
+                               allwinner,pins = "PC3";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+                               allwinner,pins = "PH1";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       led_pins_olinuxino: led_pins@0 {
+                               allwinner,pins = "PH2";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <1>;
+                               allwinner,pull = <0>;
+                       };
+
+                       usb1_vbus_pin: usb1_vbus_pin@0 {
+                                       allwinner,pins = "PH6";
+                                       allwinner,function = "gpio_out";
+                                       allwinner,drive = <0>;
+                                       allwinner,pull = <2>;
+                       };
+
+                       usb2_vbus_pin: usb2_vbus_pin@0 {
+                                       allwinner,pins = "PH3";
+                                       allwinner,function = "gpio_out";
+                                       allwinner,drive = <0>;
+                                       allwinner,pull = <2>;
+                       };
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c1: i2c@01c2b000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c1_pins_a>;
+                       status = "okay";
+               };
+
+               ehci0: ehci0@0x01c14000 {
+                               vbus-supply = <&reg_usb1_vbus>;
+                               status = "okay";
+               };
+
+               ehci1: ehci1@0x01c1c000 {
+                               vbus-supply = <&reg_usb2_vbus>;
+                               status = "okay";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxino>;
+
+               green {
+                       label = "a10-olinuxino-lime:green:usr";
+                       gpios = <&pio 7 2 0>;
+                       default-state = "on";
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+
+               reg_usb1_vbus: usb1-vbus {
+                       compatible = "regulator-fixed";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&usb1_vbus_pin>;
+                       regulator-name = "usb1-vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&pio 7 6 0>;
+               };
+
+               reg_usb2_vbus: usb2-vbus {
+                       compatible = "regulator-fixed";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&usb2_vbus_pin>;
+                       regulator-name = "usb2-vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&pio 7 3 0>;
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               pinctrl-names = "default";
+
+               reg_ahci_5v: ahci-5v {
+                       compatible = "regulator-fixed";
+                       regulator-name = "ahci-5v";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       pinctrl-0 = <&ahci_pwr_pin>;
+                       gpio = <&pio 2 3 0>;
+                       enable-active-high;
+               };
+       };
+};

diff --git a/target/linux/sunxi/image/Makefile b/target/linux/sunxi/image/Makefile
index d77aff059b77ef00acbff7844b438846c7399d21..0a3a96603a72fb23830c026055aa28e9ed563bd9 100644 (file)
--- a/target/linux/sunxi/image/Makefile
+++ b/target/linux/sunxi/image/Makefile
@@ -10,6 +10,7 @@ include $(INCLUDE_DIR)/image.mk
 BOARDS:= \
        sun4i-a10-pcduino \
        sun4i-a10-cubieboard \
+       sun4i-a10-olinuxino-lime \
        sun5i-a13-olinuxino \
        sun7i-a20-olinuxino-micro \
        sun7i-a20-cubieboard2

diff --git a/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch b/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch
new file mode 100644 (file)
index 0000000..1c7a15c
--- /dev/null
+++ b/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch
@@ -0,0 +1,12 @@
+Index: linux-3.12.5/arch/arm/boot/dts/Makefile
+===================================================================
+--- linux-3.12.5.orig/arch/arm/boot/dts/Makefile       2014-01-07 20:20:35.112013217 +0100
++++ linux-3.12.5/arch/arm/boot/dts/Makefile    2014-01-07 20:20:35.124013454 +0100
+@@ -232,6 +232,7 @@
+       sun4i-a10-mini-xplus.dtb \
+       sun4i-a10-hackberry.dtb \
+       sun4i-a10-pcduino.dtb \
++      sun4i-a10-olinuxino-lime.dtb \
+       sun5i-a10s-olinuxino-micro.dtb \
+       sun5i-a13-olinuxino.dtb \
+       sun5i-a13-olinuxino-micro.dtb \

diff --git a/target/linux/sunxi/profiles/a10-olinuxino.mk b/target/linux/sunxi/profiles/a10-olinuxino.mk
new file mode 100644 (file)
index 0000000..a178e5f
--- /dev/null
+++ b/target/linux/sunxi/profiles/a10-olinuxino.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/A10-OLinuXino-Lime
+       NAME:=A10 OLinuXino LIME
+       PACKAGES:=\
+               uboot-sunxi-A10-OLinuXino-Lime kmod-ata-sunxi kmod-sun4i-emac
+endef
+
+define Profile/A10-OLinuXino-Lime/Description
+       Package set optimized for the Olimex A10 OLinuXino LIME
+endef
+
+$(eval $(call Profile,A10-OLinuXino-Lime))