ar71xx: add GL-Domino Pi support V3
authorJohn Crispin <john@openwrt.org>
Tue, 24 Nov 2015 18:30:50 +0000 (18:30 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 24 Nov 2015 18:30:50 +0000 (18:30 +0000)
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47622

target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.1
target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/gli.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch [new file with mode: 0644]

index da3e5614d83b378eba8089a416ef22cad4ff4405..244700fd8c38adc65ff5d5f870481738ba1899eb 100755 (executable)
@@ -225,6 +225,10 @@ gl-ar300)
        ucidef_set_led_wlan "wlan" "WLAN" "gl_ar300:wlan" "phy0tpt"
        ;;
 
+gl-domino)
+       ucidef_set_led_wlan "wlan" "WLAN" "domino:blue:wlan" "phy0tpt"
+       ;;
+
 gl-inet)
        ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
        ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
index a5a40a177d6560e86318a3b36602d4ffef1e157c..68e0caaa62b2e5f127ceff958db1db4bed7105e0 100755 (executable)
@@ -397,6 +397,7 @@ alfa-ap96 |\
 alfa-nx |\
 ap83 |\
 gl-ar150 |\
+gl-domino |\
 gl-inet |\
 jwap003 |\
 pb42 |\
index 8eb9266d4a4ae4f0ba8a1fdec475b6daefea7909..df77040bdd8fac3494543b3f9bf72e1e577e6a02 100755 (executable)
@@ -466,6 +466,9 @@ ar71xx_board_detect() {
        *"Dragino v2")
                name="dragino2"
                ;;
+       *"Domino Pi")
+               name="gl-domino"
+               ;;
        *"EAP300 v2")
                name="eap300v2"
                ;;
index e68a05bfc02dd60beaa9acae67a09d5e14fa5f67..41886e33e82dafaffb81c6e1bb6cde2d22e82822 100755 (executable)
@@ -222,6 +222,7 @@ platform_check_image() {
        ew-dorin-router | \
        gl-ar150 | \
        gl-ar300 | \
+       gl-domino | \
        hiwifi-hc6361 | \
        hornet-ub-x2 | \
        mzk-w04nu | \
index b217a436ab80979221e143d81efe979426c80bc1..eff197a14d5088097a336e5b0fa698a0cd1b0a19 100644 (file)
@@ -66,6 +66,7 @@ CONFIG_ATH79_MACH_DIR_825_C1=y
 CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
 CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
 CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
+CONFIG_ATH79_MACH_GL_DOMINO=y
 CONFIG_ATH79_MACH_DRAGINO2=y
 CONFIG_ATH79_MACH_EAP300V2=y
 CONFIG_ATH79_MACH_EAP7660D=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
new file mode 100644 (file)
index 0000000..a8a42ad
--- /dev/null
@@ -0,0 +1,136 @@
+/*
+ *  Domino board support
+ *
+ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
+ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DOMINO_GPIO_LED_WLAN           0
+#define DOMINO_GPIO_LED_WAN                    17
+#define DOMINO_GPIO_LED_USB                    1
+#define DOMINO_GPIO_LED_LAN1           13
+#define DOMINO_GPIO_LED_LAN2           14
+#define DOMINO_GPIO_LED_LAN3           15
+#define DOMINO_GPIO_LED_LAN4           16
+#define DOMINO_GPIO_LED_SYS                    27
+#define DOMINO_GPIO_LED_WPS                    26
+#define DOMINO_GPIO_USB_POWER          6
+
+#define DOMINO_GPIO_BTN_RESET          11
+#define DOMINO_GPIO_BTN_WPS                    20
+
+#define DOMINO_KEYS_POLL_INTERVAL      20      /* msecs */
+#define DOMINO_KEYS_DEBOUNCE_INTERVAL  (3 * DOMINO_KEYS_POLL_INTERVAL)
+
+#define DOMINO_MAC0_OFFSET     0x0000
+#define        DOMINO_MAC1_OFFSET      0x0000
+#define DOMINO_CALDATA_OFFSET  0x1000
+#define DOMINO_WMAC_MAC_OFFSET 0x0000
+
+static struct gpio_led domino_leds_gpio[] __initdata = {
+       {
+               .name = "domino:blue:wlan",
+               .gpio = DOMINO_GPIO_LED_WLAN,
+               .active_low = 0,
+       },
+       {
+               .name = "domino:red:wan",
+               .gpio = DOMINO_GPIO_LED_WAN,
+               .active_low = 1,
+       },
+       {
+               .name = "domino:white:usb",
+               .gpio = DOMINO_GPIO_LED_USB,
+               .active_low = 0,
+       },
+       {
+               .name = "domino:green:lan1",
+               .gpio = DOMINO_GPIO_LED_LAN1,
+               .active_low = 0,
+       },
+       {
+               .name = "domino:yellow:wps",
+               .gpio = DOMINO_GPIO_LED_WPS,
+               .active_low = 1,
+       },
+       {
+               .name = "domino:orange:sys",
+               .gpio = DOMINO_GPIO_LED_SYS,
+               .active_low = 1,
+       },
+};
+
+static struct gpio_keys_button domino_gpio_keys[] __initdata = {
+       {
+               .desc = "reset",
+               .type = EV_KEY,
+               .code = KEY_RESTART,
+               .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = DOMINO_GPIO_BTN_RESET,
+               .active_low = 0,
+       },
+       {
+               .desc = "wps",
+               .type = EV_KEY,
+               .code = KEY_WPS_BUTTON,
+               .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = DOMINO_GPIO_BTN_WPS,
+               .active_low = 0,
+       }
+};
+
+static void __init domino_setup(void)
+{
+
+       /* ART base address */
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       /* register flash. */
+       ath79_register_m25p80(NULL);
+
+       /* register gpio LEDs and keys */
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(domino_leds_gpio),
+                                domino_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, DOMINO_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(domino_gpio_keys),
+                                       domino_gpio_keys);
+
+       gpio_request_one(DOMINO_GPIO_USB_POWER,
+                        GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+                        "USB power");
+       /* enable usb */
+       ath79_register_usb();
+
+       /* register eth0 as WAN, eth1 as LAN */
+       ath79_init_mac(ath79_eth0_data.mac_addr, art+DOMINO_MAC0_OFFSET, 0);
+       ath79_init_mac(ath79_eth1_data.mac_addr, art+DOMINO_MAC1_OFFSET, 0);
+       ath79_register_mdio(0, 0x0);
+       ath79_register_eth(0);
+       ath79_register_eth(1);
+
+       /* register wireless mac with cal data */
+       ath79_register_wmac(art + DOMINO_CALDATA_OFFSET, art + DOMINO_WMAC_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_DOMINO, "DOMINO", "Domino Pi", domino_setup);
index c5873760a523c017dcf8335b127ff1ac18d00681..a0fa714909b8b36d634ed93869b3ccbb15606975 100644 (file)
@@ -36,3 +36,14 @@ define Profile/GL-AR300/Description
 endef
 
 $(eval $(call Profile,GL-AR300))
+
+define Profile/DOMINO
+       NAME:=GL Domino Pi
+       PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/DOMINO/Description
+       Configuration of Domino, Wifi for everything.
+endef
+
+$(eval $(call Profile,DOMINO))
index e0eea985609ae8ce111adf62000a0b46c989eb67..d12ad8b16d8be87d7c7731537db46fc22d47c916 100644 (file)
@@ -204,6 +204,14 @@ define Device/gl-ar300
 endef
 TARGET_DEVICES += gl-ar300
 
+define Device/gl-domino
+  BOARDNAME = DOMINO
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-domino
+
 
 define Device/wndr3700
   BOARDNAME = WNDR3700
diff --git a/target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch b/target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch
new file mode 100644 (file)
index 0000000..80351cf
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -597,6 +597,16 @@ config ATH79_MACH_GL_AR300
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
++config ATH79_MACH_GL_DOMINO
++      bool "DOMINO support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_GL_INET
+       bool "GL-INET support"
+       select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750)     += mach
+ obj-$(CONFIG_ATH79_MACH_F9K1115V2)    += mach-f9k1115v2.o
+ obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
+ obj-$(CONFIG_ATH79_MACH_GL_AR300)     += mach-gl-ar300.o
++obj-$(CONFIG_ATH79_MACH_GL_DOMINO)            += mach-gl-domino.o
+ obj-$(CONFIG_ATH79_MACH_GL_INET)      += mach-gl-inet.o
+ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)        += mach-gs-minibox-v1.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE)    += mach-gs-oolite.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -74,6 +74,7 @@ enum ath79_mach_type {
+       ATH79_MACH_F9K1115V2,           /* Belkin AC1750DB */
+       ATH79_MACH_GL_AR150,    /* GL-AR150 support */
+       ATH79_MACH_GL_AR300,            /* GL-AR300 */
++      ATH79_MACH_GL_DOMINO,           /* Domino */
+       ATH79_MACH_GL_INET,             /* GL-CONNECT GL-INET */
+       ATH79_MACH_GS_MINIBOX_V1,       /* Gainstrong MiniBox V1.0 */
+       ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */