trivial: fix typo milisecond/millisecond for documentation and source comments.

Signed-off-by: Martin Olsson <martin@minimum.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf3286f08cc6eb7dfb3115ff9c5ce90..8bb37237ebd25b19759cc47874c63155406ea28f 100644 (file)
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 757e5956b13297f38a204740486f9907c35a0ae7..ae1cae38a0782131d2afab31cc9e2c97ba6df1eb 100644 (file)
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -577,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
                /*
                 * If necessary schedule the packet transfer to occur 'timeout'
-                * miliseconds later in ide_delayed_transfer_pc() after the
+                * milliseconds later in ide_delayed_transfer_pc() after the
                 * device says it's ready for a packet.
                 */
                if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {

diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 3083338716b262eb8a730ee4c5fbc4dd3f202e27..47dbfe298b43ab4002e591a4da7702daa982e6dc 100644 (file)
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -502,7 +502,7 @@ tone_off:
                        break;
                }
                dsp->cmx_delay = (*((int *)data)) << 3;
-                       /* miliseconds to samples */
+                       /* milliseconds to samples */
                if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
                        /* clip to half of maximum usable buffer
                        (half of half buffer) */

diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f19497c82915722fe774f5fe48f40ed222..dfc2541bb55628dc4c0c934958834cdc980a646b 100644 (file)
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
 #define                IPG_DMALIST_ALIGN_PAD   0x07
 #define                IPG_MULTICAST_HASHTABLE_SIZE    0x40
 
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
  * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
  */
 #define         IPG_AC_RESETWAIT             0x05

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 19ae0842047c4750f0614479381c39b76d40d7ca..18fd975412d3da1d2aa5867eae23c10e176bdc25 100644 (file)
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port)
 {
        if (atomic_dec_return(&wka_port->refcount) != 0)
                return;
-       /* wait 10 miliseconds, other reqs might pop in */
+       /* wait 10 milliseconds, other reqs might pop in */
        schedule_delayed_work(&wka_port->work, HZ / 100);
 }
 

diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h
index 4b56c0436ba2727970fd245289ce271174f54425..b2613c2eaac7df353d671f4f2961ac738d948808 100644 (file)
--- a/drivers/scsi/dpt/osd_util.h
+++ b/drivers/scsi/dpt/osd_util.h
@@ -342,7 +342,7 @@ uLONG osdGetThreadID(void);
 /* wakes up the specifed thread */
 void osdWakeThread(uLONG);
 
-/* osd sleep for x miliseconds */
+/* osd sleep for x milliseconds */
 void osdSleep(uLONG);
 
 #define DPT_THREAD_PRIORITY_LOWEST 0x00

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index eabf20eeb370ee4ce578c831b36003a7837d2bd9..db964db42d3c0d0c258d56395ed4f14c7fb89c61 100644 (file)
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -102,7 +102,7 @@ struct edgeport_port {
        __u8 shadow_mcr;
        __u8 shadow_lsr;
        __u8 lsr_mask;
-       __u32 ump_read_timeout;         /* Number of miliseconds the UMP will
+       __u32 ump_read_timeout;         /* Number of milliseconds the UMP will
                                           wait without data before completing
                                           a read short */
        int baud_rate;

diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index c0efe4491116bf1857255bbb6a1dcde1e91afe3e..6416d3f0c7be8210559f1ad8dda61f1a974fc023 100644 (file)
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x
        unsigned int port;
        const unsigned char *image;
 
-       /* XILINX reset (wait at least 1 milisecond between reset on and off). */
+       /* XILINX reset (wait at least 1 millisecond between reset on and off). */
        vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
        vx_inl(chip, CNTRL);
        msleep(10);