+++ /dev/null
-#!/bin/sh
-
-. /lib/functions/leds.sh
-. /lib/functions/uci-defaults.sh
-
-set_wifi_led() {
- ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
-}
-
-
-board=$(board_name)
-boardname="${board##*,}"
-
-board_config_update
-
-led_wlan="$(get_dt_led wlan)"
-[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
-
-case $board in
-7links,px-4885-4m|\
-7links,px-4885-8m)
- set_wifi_led "px-4885:orange:wifi"
- ;;
-aigale,ai-br100)
- ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
- set_wifi_led "$boardname:blue:wlan"
- ;;
-airlink101,ar670w|\
-airlink101,ar725w|\
-asiarf,awapn2403)
- set_wifi_led "rt2800soc-phy0::radio"
- ;;
-airlive,air3gii|\
-aximcom,mr-102n|\
-edimax,3g-6200nl|\
-hilink,hlk-7628n|\
-netgear,wnce2001|\
-skylab,skw92a|\
-zbtlink,zbt-we2026)
- set_wifi_led "$boardname:green:wlan"
- ;;
-alfa-network,ac1200rm)
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-alfa-network,awusfree1|\
-edimax,br-6478ac-v2|\
-edimax,ew-7478apc)
- set_wifi_led "$boardname:blue:wlan"
- ;;
-alfa-network,tube-e4g)
- ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
- ;;
-allnet,all0256n-4m|\
-allnet,all0256n-8m)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
- set_wifi_led "rt2800pci-phy0::radio"
- ;;
-alphanetworks,asl26555-8m|\
-alphanetworks,asl26555-16m)
- ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
- set_wifi_led "asl26555:green:wlan"
- ;;
-asus,rp-n53)
- ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
- set_wifi_led "$boardname:blue:wifi"
- ;;
-asus,rt-n12p)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
- ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
- set_wifi_led "$boardname:green:air"
- ;;
-asus,rt-n14u)
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
- ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
- set_wifi_led "$boardname:blue:air"
- ;;
-bdcom,wap2100-sk)
- set_wifi_led "$boardname:green:wlan2g"
- ;;
-belkin,f9k1109v1)
- set_usb_led "$boardname:green:usb1"
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
- ;;
-alfa-network,w502u|\
-dlink,dir-300-b1|\
-dlink,dir-300-b7|\
-dlink,dir-320-b1|\
-dlink,dir-600-b1|\
-dlink,dir-610-a1|\
-dlink,dir-615-d|\
-dlink,dir-615-h1|\
-dlink,dir-620-a1|\
-engenius,esr-9753|\
-hilink,hlk-rm04|\
-nexx,wt1520-4m|\
-nexx,wt1520-8m|\
-ralink,v11st-fe|\
-skyline,sl-r7205|\
-tenda,w306r-v2|\
-zyxel,keenetic-start|\
-zyxel,keenetic|\
-zyxel,nbg-419n-v2)
- set_wifi_led "rt2800pci-phy0::radio"
- ;;
-asus,rt-ac51u|\
-kingston,mlw221|\
-kingston,mlwg2|\
-rakwireless,rak633|\
-sanlinking,d240)
- set_wifi_led "$boardname:blue:wifi"
- ;;
-belkin,f5d8235-v1)
- set_wifi_led "$boardname:blue:wireless"
- ;;
-comfast,cf-wr800n)
- ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
- set_wifi_led "$boardname:white:wifi"
- ;;
-cudy,wr1000)
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
- ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
- ;;
-d-team,newifi-d2)
- ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
- ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
- ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
- ;;
-d-team,pbr-m1|\
-gehua,ghl-r-001)
- ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
- ;;
-dlink,dcs-930l-b1)
- ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
- ;;
-dlink,dir-620-d1|\
-dlink,dwr-116-a1|\
-head-weblink,hdrm200|\
-ohyeah,oy-0001|\
-planex,mzk-ex300np|\
-trendnet,tew-714tru|\
-zbtlink,zbt-wr8305rt|\
-zyxel,keenetic-omni|\
-zyxel,keenetic-omni-ii|\
-zyxel,keenetic-viva)
- set_wifi_led "$boardname:green:wifi"
- ;;
-dlink,dir-860l-b1)
- ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
- ;;
-dlink,dwr-118-a1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-dlink,dwr-118-a2)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-dlink,dwr-921-c1|\
-dlink,dwr-922-e2)
- set_wifi_led "$boardname:green:wifi"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
- ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
- ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
- ;;
-dovado,tiny-ac|\
-fon,fonera-20n)
- set_wifi_led "$boardname:orange:wifi"
- ;;
-edimax,3g-6200n|\
-edimax,br-6475nd|\
-planex,mzk-w300nh2)
- set_wifi_led "$boardname:amber:wlan"
- ;;
-edimax,ew-7476rpc|\
-edimax,ew-7478ac)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
- ;;
-elecom,wrh-300cr)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
- ;;
-engenius,esr600)
- ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
- ;;
-glinet,gl-mt300a|\
-glinet,gl-mt300n|\
-glinet,gl-mt750)
- set_wifi_led "$boardname:wlan"
- ;;
-glinet,gl-mt300n-v2)
- set_wifi_led "$boardname:red:wlan"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
- ;;
-gnubee,gb-pc1|\
-gnubee,gb-pc2)
- ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
- ;;
-hauppauge,broadway)
- set_wifi_led "$boardname:red:wps_active"
- ;;
-hiwifi,hc5661)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
- set_wifi_led "$boardname:blue:wlan2g"
- ;;
-hiwifi,hc5661a|\
-hiwifi,hc5761a|\
-xzwifi,creativebox-v1)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
- ;;
-hiwifi,hc5761)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
- ;;
-hiwifi,hc5861)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
- ;;
-hnet,c108)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
- ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
- ;;
-hootoo,ht-tm02)
- ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
- set_wifi_led "$boardname:blue:wlan"
- ;;
-huawei,hg255d)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
- ;;
-intenso,memory2move)
- set_wifi_led "$boardname:blue:wifi"
- ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
- ;;
-iodata,wn-ac1167gr|\
-iodata,wn-ac733gr3)
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
- ;;
-kimax,u25awf-h1)
- set_wifi_led "u25awf:red:wifi"
- ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
- ;;
-kimax,u35wf)
- set_wifi_led "$boardname:blue:wifi"
- ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
- ;;
-lava,lr-25g001)
- ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
- ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
- ;;
-lenovo,newifi-y1)
- ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
- ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
- ;;
-lenovo,newifi-y1s)
- ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
- ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
- ;;
-mediatek,linkit-smart-7688)
- ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
- ;;
-mikrotik,rbm11g)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
- ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
- ;;
-mtc,wr1201)
- ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
- ;;
-netgear,ex2700|\
-netgear,wn3000rp-v3)
- set_wifi_led "$boardname:green:router"
- ;;
-netgear,ex3700)
- ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
- ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
- ;;
-netgear,r6120)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
- ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
- ;;
-netgear,r6220|\
-netgear,r6260|\
-netgear,r6350|\
-netgear,r6850|\
-netgear,wndr3700-v5)
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
- ;;
-omnima,hpm)
- ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
- set_wifi_led "$boardname:green:wifi"
- ;;
-omnima,miniembplug)
- set_wifi_led "$boardname:red:wlan"
- ;;
-phicomm,psg1208)
- set_wifi_led "$boardname:white:wlan2g"
- ;;
-planex,mzk-ex750np|\
-zbtlink,zbt-we826-e)
- set_wifi_led "$boardname:red:wifi"
- ;;
-tama,w06)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
- ;;
-tplink,archer-c2-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
- set_wifi_led "$boardname:green:wlan"
- ;;
-tplink,archer-c20-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
- ;;
-tplink,archer-c20-v4)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
- ;;
-tplink,archer-c20i)
- ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
- ;;
-tplink,archer-c50-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
- set_wifi_led "$boardname:green:wlan5g"
- ;;
-tplink,archer-c50-v3|\
-tplink,archer-c50-v4)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
- ;;
-tplink,archer-mr200)
- ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
- ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
- set_wifi_led "$boardname:white:wlan"
- ;;
-tplink,re350-v1|\
-tplink,re650-v1)
- ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
- ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
- ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
- ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
- ;;
-tplink,tl-mr3020-v3)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
- ;;
-tplink,tl-mr3420-v5|\
-tplink,tl-wr842n-v5)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wa801nd-v5)
- ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
- ;;
-tplink,tl-wr840n-v4)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr841n-v13)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
- ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
- ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr841n-v14)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr902ac-v3)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
- ;;
-unielec,u7628-01-16m)
- ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
- ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
- ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
- ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
- ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
- set_wifi_led "u7628-01:green:wlan"
- ;;
-vocore,vocore-8m|\
-vocore,vocore-16m)
- ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
- ;;
-wavlink,wl-wn570ha1)
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
- ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
- set_wifi_led "$boardname:green:wifi"
- ;;
-wavlink,wl-wn575a3)
- ucidef_set_rssimon "wlan1" "200000" "1"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
- ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
- ;;
-xiaomi,mir3g)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
- ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
- ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
- ;;
-xiaomi,mir3p)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
- ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
- ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
- ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
- ;;
-youhua,wr1200js)
- ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
- ;;
-youku,yk1)
- set_wifi_led "$boardname:blue:air"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
- ;;
-zbtlink,zbt-ape522ii)
- ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
- ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
- ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
- ;;
-zbtlink,zbt-wa05)
- set_wifi_led "$boardname:blue:air"
- ;;
-zbtlink,zbt-we826-16m|\
-zbtlink,zbt-we826-32m)
- set_wifi_led "zbt-we826:green:wifi"
- ;;
-zbtlink,zbt-we1026-5g-16m)
- ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
- set_wifi_led "we1026-5g:green:wifi"
- ;;
-zbtlink,zbt-we1226)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
- ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
- ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
- ;;
-zorlik,zl5900v2)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
- ;;
-zyxel,keenetic-extra-ii)
- set_wifi_led "$boardname:green:wifi"
- ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ramips_setup_rt3x5x_vlans()
-{
- if [ ! -x /sbin/swconfig ]; then
- # legacy default
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- return
- fi
- local wanports=""
- local lanports=""
- for port in 5 4 3 2 1 0; do
- if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
- continue
- fi
- if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
- wanports="$port:wan $wanports"
- else
- lanports="$port:lan $lanports"
- fi
- done
- ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
-}
-
-ramips_setup_interfaces()
-{
- local board="$1"
-
- case $board in
- accton,wr6202|\
- alfa-network,w502u|\
- netcore,nw718|\
- petatel,psr-680w|\
- skyline,sl-r7205|\
- upvel,ur-336un)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ;;
- adslr,g7|\
- afoundry,ew1200|\
- aigale,ai-br100|\
- alfa-network,ac1200rm|\
- asus,rt-n12p|\
- buffalo,whr-g300n|\
- d-team,pbr-m1|\
- dlink,dir-300-b7|\
- dlink,dir-320-b1|\
- dlink,dir-610-a1|\
- dlink,dir-810l|\
- dlink,dwr-116-a1|\
- dlink,dwr-921-c1|\
- dlink,dwr-922-e2|\
- edimax,3g-6200n|\
- firefly,firewrt|\
- hilink,hlk-rm04|\
- hiwifi,hc5661a|\
- hiwifi,hc5761a|\
- hiwifi,hc5962|\
- mediatek,ap-mt7621a-v60|\
- mediatek,mt7621-eval-board|\
- mediatek,mt7628an-eval-board|\
- mercury,mac1200r-v2|\
- mqmaker,witi|\
- mtc,wr1201|\
- netis,wf-2881|\
- nixcore,x1-16m|\
- nixcore,x1-8m|\
- ohyeah,oy-0001|\
- phicomm,k2p|\
- phicomm,psg1208|\
- phicomm,psg1218a|\
- planex,db-wrt01|\
- planex,mzk-750dhp|\
- planex,mzk-w300nh2|\
- planex,vr500|\
- samknows,whitebox-v8|\
- sanlinking,d240|\
- storylink,sap-g3200u3|\
- telco-electronics,x1|\
- totolink,a7000r|\
- totolink,lr1200|\
- unielec,u7621-06-16m|\
- unielec,u7621-06-64m|\
- wavlink,wl-wn570ha1|\
- wavlink,wl-wn575a3|\
- xiaomi,miwifi-mini|\
- xiaomi,miwifi-nano|\
- xiaoyu,xy-c5|\
- xzwifi,creativebox-v1|\
- youku,yk-l2|\
- youku,yk1|\
- zbtlink,zbt-ape522ii|\
- zbtlink,zbt-we1326|\
- zbtlink,zbt-we3526|\
- zbtlink,zbt-we826-16m|\
- zbtlink,zbt-we826-32m|\
- zbtlink,zbt-we826-e|\
- zbtlink,zbt-wg2626|\
- zbtlink,zbt-wg3526-16m|\
- zbtlink,zbt-wg3526-32m|\
- zbtlink,zbt-wr8305rt|\
- zyxel,keenetic|\
- zyxel,keenetic-omni)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
- ;;
- airlink101,ar670w|\
- airlink101,ar725w|\
- asus,rt-ac51u|\
- rakwireless,rak633)
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
- ;;
- alfa-network,awusfree1|\
- alfa-network,tube-e4g|\
- buffalo,wli-tx4-ag300n|\
- buffalo,wmr-300|\
- dlink,dap-1522-a1|\
- dlink,dch-m225|\
- d-team,pbr-d1|\
- elecom,wrh-300cr|\
- huawei,d105|\
- kimax,u25awf-h1|\
- loewe,wmdr-143n|\
- netgear,ex2700|\
- netgear,ex3700|\
- netgear,wn3000rp-v3|\
- omnima,hpm|\
- planex,cs-qr10|\
- planex,mzk-ex300np|\
- planex,mzk-ex750np|\
- ravpower,wd03|\
- sercomm,na930|\
- tama,w06|\
- tplink,tl-mr3020-v3|\
- tplink,tl-wr802n-v4)
- ucidef_set_interface_lan "eth0"
- ;;
- allnet,all0256n-4m|\
- allnet,all0256n-8m|\
- allnet,all5002|\
- allnet,all5003|\
- dlink,dcs-930l-b1|\
- dlink,dcs-930|\
- edimax,ew-7476rpc|\
- edimax,ew-7478ac|\
- hame,mpr-a2|\
- hauppauge,broadway|\
- hootoo,ht-tm02|\
- intenso,memory2move|\
- kimax,u35wf|\
- mediatek,linkit-smart-7688|\
- microduino,microwrt|\
- mikrotik,rbm11g|\
- netgear,wnce2001|\
- onion,omega2p|\
- onion,omega2|\
- tenda,3g150b|\
- tenda,3g300m|\
- tenda,w150m|\
- thunder,timecloud|\
- tplink,tl-wa801nd-v5|\
- unbranded,a5-v11|\
- wansview,ncs601w|\
- widora,neo-16m|\
- widora,neo-32m|\
- yukai,bocco|\
- zbtlink,zbt-cpe102|\
- zorlik,zl5900v2|\
- zte,q7)
- ucidef_add_switch "switch0"
- ucidef_add_switch_attr "switch0" "enable" "false"
- ucidef_set_interface_lan "eth0"
- ;;
- alphanetworks,asl26555-8m|\
- alphanetworks,asl26555-16m|\
- asus,rp-n53)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
- ;;
- argus,atp-52b|\
- asiarf,awm002-evb-4m|\
- asiarf,awm002-evb-8m|\
- asus,rt-ac57u|\
- asus,rt-n14u|\
- bdcom,wap2100-sk|\
- dlink,dir-645|\
- glinet,gl-mt300a|\
- glinet,gl-mt300n|\
- glinet,gl-mt750|\
- hilink,hlk-7628n|\
- hiwifi,hc5661|\
- hiwifi,hc5861b|\
- jcg,jhr-n805r|\
- jcg,jhr-n825r|\
- jcg,jhr-n926r|\
- mikrotik,rb750gr3|\
- mikrotik,rbm33g|\
- planex,mzk-wdpr|\
- skylab,skw92a|\
- tplink,archer-c20-v4|\
- tplink,archer-c20i|\
- tplink,archer-c50-v3|\
- tplink,archer-c50-v4|\
- tplink,tl-mr3420-v5|\
- tplink,tl-wr840n-v4|\
- tplink,tl-wr840n-v5|\
- tplink,tl-wr841n-v13|\
- tplink,tl-wr841n-v14|\
- tplink,tl-wr842n-v5|\
- unielec,u7628-01-16m|\
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp|\
- upvel,ur-326n4g|\
- wrtnode,wrtnode|\
- wrtnode,wrtnode2p|\
- wrtnode,wrtnode2r|\
- youhua,wr1200js|\
- zbtlink,zbt-wa05|\
- zyxel,keenetic-extra-ii)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
- ;;
- asiarf,ap7621-001)
- ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0"
- ;;
- asiarf,ap7621-nv1)
- ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0"
- ;;
- asiarf,awapn2403)
- ucidef_add_switch "switch0" \
- "0:lan" "1:wan" "6@eth0"
- ;;
- asus,rt-ac65p|\
- asus,rt-ac85p|\
- dlink,dir-860l-b1|\
- elecom,wrc-1167ghbk2-s|\
- elecom,wrc-1900gst|\
- elecom,wrc-2533gst|\
- huawei,hg255d|\
- iodata,wn-ax1167gr|\
- iodata,wn-gx300gr|\
- iodata,wnpr2600g|\
- iptime,a604m)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
- ;;
- asus,rt-n15|\
- belkin,f9k1109v1|\
- sitecom,wl-351)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
- ;;
- asus,rt-n56u)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
- ;;
- asus,wl-330n|\
- easyacc,wizard-8800|\
- kingston,mlwg2)
- ucidef_set_interface_lan "eth0.1"
- ;;
- aximcom,mr-102n|\
- kingston,mlw221)
- ucidef_set_interface_lan "eth0.2"
- ;;
- belkin,f5d8235-v1|\
- belkin,f5d8235-v2|\
- buffalo,wzr-agl300nh|\
- ralink,v11st-fe|\
- trendnet,tew-714tru)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
- ;;
- buffalo,wcr-1166ds)
- ucidef_add_switch "switch0" \
- "3:lan" "4:wan" "6@eth0"
- ;;
- buffalo,whr-300hp2|\
- buffalo,whr-600d|\
- buffalo,wsr-1166dhp|\
- buffalo,wsr-600dhp)
- ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
- ;;
- buffalo,whr-1166d)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
- ;;
- comfast,cf-wr800n|\
- hnet,c108|\
- tplink,tl-wr902ac-v3|\
- trendnet,tew-638apb-v2)
- ucidef_add_switch "switch0" \
- "4:lan" "6@eth0"
- ;;
- cudy,wr1000|\
- xiaomi,mir3g-v2)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
- ;;
- dlink,dir-510l|\
- glinet,vixmini|\
- netgear,ex6150|\
- tplink,re350-v1|\
- tplink,re650-v1)
- ucidef_add_switch "switch0" \
- "0:lan" "6@eth0"
- ;;
- dlink,dir-615-h1|\
- d-team,newifi-d2|\
- wevo,11acnas|\
- wevo,w2914ns-v2|\
- zbtlink,zbt-we2026)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
- ;;
- dlink,dwr-118-a1)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
- ;;
- dlink,dwr-118-a2)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
- ;;
- duzun,dm06)
- ucidef_add_switch "switch0" \
- "1:lan" "0:wan" "6@eth0"
- ;;
- edimax,br-6475nd)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
- ;;
- edimax,br-6478ac-v2|\
- tplink,archer-c2-v1)
- ucidef_add_switch "switch1" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
- ;;
- engenius,esr600)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0"
- ;;
- fon,fon2601)
- ucidef_add_switch "switch0" \
- "0:lan" "4:wan" "6@eth0"
- ;;
- edimax,rg21s)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
- ;;
- gehua,ghl-r-001)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
- ;;
- glinet,gl-mt300n-v2)
- ucidef_add_switch "switch0" \
- "1:lan" "0:wan" "6@eth0"
- ;;
- gnubee,gb-pc1|\
- gnubee,gb-pc2)
- ucidef_add_switch "switch0" \
- "0:lan" "4:lan" "6@eth0"
- ;;
- head-weblink,hdrm200)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
- ;;
- hiwifi,hc5761)
- ucidef_add_switch "switch0" \
- "1:lan" "4:lan" "0:wan" "6@eth0"
- ;;
- hiwifi,hc5861)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "5:wan" "6@eth0"
- ;;
- iodata,wn-ac1167gr|\
- iodata,wn-ac733gr3)
- ucidef_add_switch "switch1" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
- ;;
- iptime,a3)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "0:wan" "6@eth0"
- ;;
- lava,lr-25g001|\
- sitecom,wlr-6000|\
- trendnet,tew-691gr|\
- trendnet,tew-692gr)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
- ;;
- lenovo,newifi-d1)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
- ;;
- lenovo,newifi-y1|\
- zbtlink,zbt-we1226)
- ucidef_add_switch "switch0" \
- "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
- ;;
- lenovo,newifi-y1s)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
- ;;
- linksys,e1700|\
- ralink,mt7620a-mt7530-evb)
- ucidef_add_switch "switch1" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
- ;;
- linksys,re6500)
- ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
- ;;
- netgear,r6120|\
- netgear,r6220|\
- netgear,r6260|\
- netgear,r6350|\
- netgear,r6850|\
- netgear,wndr3700-v5)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
- ;;
- nexx,wt1520-4m|\
- nexx,wt1520-8m|\
- vonets,var11n-300)
- ucidef_add_switch "switch0" \
- "0:lan" "4:wan" "6@eth0"
- ;;
- nexx,wt3020-4m|\
- nexx,wt3020-8m)
- ucidef_add_switch "switch0" \
- "4:lan" "0:wan" "6@eth0"
- ;;
- phicomm,k2g)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
- ;;
- phicomm,psg1218b)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
- ;;
- planex,mzk-dp150n|\
- vocore,vocore-8m|\
- vocore,vocore-16m)
- ucidef_add_switch "switch0" \
- "0:lan" "4:lan" "6t@eth0"
- ;;
- samsung,cy-swr1100)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
- ;;
- sparklan,wcr-150gn|\
- zbtlink,zbt-we1026-5g-16m)
- ucidef_add_switch "switch0" \
- "0:lan" "6t@eth0"
- ;;
- tplink,archer-c20-v1|\
- tplink,archer-c50-v1)
- ucidef_add_switch "switch0" \
- "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
- ;;
- tplink,archer-mr200)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
- ucidef_set_interface_wan "usb0"
- ;;
- vocore,vocore2|\
- vocore,vocore2-lite)
- ucidef_add_switch "switch0" \
- "0:lan" "2:lan" "6t@eth0"
- ;;
- wiznet,wizfi630a)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:wan" "6@eth0"
- ;;
- wiznet,wizfi630s)
- ucidef_add_switch "switch0" \
- "0:wan" "3:lan" "4:lan" "6@eth0"
- ;;
- xiaomi,mir3g)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
- ;;
- xiaomi,mir3p)
- ucidef_add_switch "switch0" \
- "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
- ;;
- xiaomi,mir4a-100m)
- ucidef_add_switch "switch0" \
- "4:lan:1" "2:lan:2" "0:wan" "6@eth0"
- ;;
- zyxel,keenetic-omni-ii)
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
- ;;
- zyxel,keenetic-start)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
- ;;
- zyxel,keenetic-viva)
- ucidef_add_switch "switch1" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
- ;;
- *)
- RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
- if [ -n "${RT3X5X}" ]; then
- ramips_setup_rt3x5x_vlans
- else
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- fi
- ;;
- esac
-}
-
-ramips_setup_macs()
-{
- local board="$1"
- local lan_mac=""
- local wan_mac=""
-
- case $board in
- 8devices,carambola|\
- alfa-network,w502u|\
- arcwireless,freestation5|\
- lenovo,newifi-y1|\
- lenovo,newifi-y1s|\
- netgear,wnce2001|\
- ohyeah,oy-0001|\
- phicomm,k2g|\
- skylab,skw92a|\
- totolink,lr1200)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
- ;;
- dlink,dir-300-b7|\
- dlink,dir-320-b1|\
- dlink,dir-620-a1|\
- engenius,esr-9753|\
- hame,mpr-a1|\
- hauppauge,broadway|\
- huawei,d105|\
- hilink,hlk-7628n|\
- hilink,hlk-rm04|\
- nexaira,bc2|\
- petatel,psr-680w|\
- skyline,sl-r7205)
- lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- asus,rt-ac57u|\
- d-team,newifi-d2|\
- d-team,pbr-m1|\
- elecom,wrc-1167ghbk2-s|\
- elecom,wrc-1900gst|\
- elecom,wrc-2533gst|\
- lenovo,newifi-d1|\
- phicomm,k2p|\
- planex,vr500|\
- samknows,whitebox-v8|\
- youhua,wr1200js|\
- youku,yk-l2|\
- zbtlink,zbt-we3526)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- ;;
- asus,rt-ac65p|\
- asus,rt-ac85p)
- wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- asus,rt-n56u)
- lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
- wan_mac=$(mtd_get_mac_binary factory 0x8004)
- ;;
- belkin,f9k1109v1)
- wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
- lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
- label_mac=$wan_mac
- ;;
- buffalo,wcr-1166ds|\
- buffalo,wsr-1166dhp)
- local index="$(find_mtd_index "board_data")"
- wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
- lan_mac=$wan_mac
- ;;
- buffalo,whr-1166d|\
- buffalo,whr-300hp2|\
- buffalo,whr-600d|\
- buffalo,whr-g300n|\
- buffalo,wsr-600dhp|\
- glinet,gl-mt300n-v2|\
- xiaomi,miwifi-mini|\
- zyxel,keenetic-start)
- # This empty case has to be kept for devices without any MAC address adjustments
- ;;
- cudy,wr1000)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- dlink,dch-m225|\
- samsung,cy-swr1100)
- lan_mac=$(mtd_get_mac_ascii factory lanmac)
- ;;
- dlink,dir-510l|\
- dlink,dwr-116-a1|\
- dlink,dwr-118-a1|\
- dlink,dwr-118-a2|\
- dlink,dwr-921-c1|\
- dlink,dwr-922-e2|\
- lava,lr-25g001)
- wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
- lan_mac=$(macaddr_add "$wan_mac" 1)
- label_mac=$wan_mac
- ;;
- dlink,dir-615-d|\
- dlink,dir-615-h1|\
- glinet,gl-mt300a|\
- glinet,gl-mt300n|\
- glinet,gl-mt750|\
- zbtlink,zbt-wg3526-16m|\
- zbtlink,zbt-wg3526-32m)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- dlink,dir-645)
- lan_mac=$(mtd_get_mac_ascii nvram lanmac)
- wan_mac=$(mtd_get_mac_ascii nvram wanmac)
- ;;
- dlink,dir-860l-b1)
- lan_mac=$(mtd_get_mac_ascii factory lanmac)
- wan_mac=$(mtd_get_mac_ascii factory wanmac)
- label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
- ;;
- dovado,tiny-ac)
- lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
- wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
- ;;
- edimax,br-6475nd)
- wan_mac=$(mtd_get_mac_binary devdata 0x7)
- ;;
- edimax,br-6478ac-v2|\
- netgear,r6260|\
- netgear,r6350|\
- netgear,r6850)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
- ;;
- edimax,rg21s|\
- engenius,esr600)
- lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- ;;
- hiwifi,hc5661|\
- hiwifi,hc5661a|\
- hiwifi,hc5761|\
- hiwifi,hc5761a|\
- hiwifi,hc5861|\
- hiwifi,hc5861b|\
- hiwifi,hc5962)
- lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
- label_mac=$lan_mac
- [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- iodata,wn-ac1167gr|\
- iodata,wn-ac733gr3)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- ;;
- iodata,wn-ax1167gr|\
- iodata,wn-gx300gr|\
- trendnet,tew-692gr)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
- ;;
- iodata,wnpr2600g)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- label_mac=$wan_mac
- ;;
- iptime,a3|\
- iptime,a604m)
- wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
- ;;
- linksys,e1700)
- wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
- ;;
- mediatek,linkit-smart-7688|\
- onion,omega2|\
- onion,omega2p)
- wan_mac=$(mtd_get_mac_binary factory 0x4)
- lan_mac=$(mtd_get_mac_binary factory 0x2e)
- ;;
- mercury,mac1200r-v2)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
- ;;
- poray,m3|\
- poray,m4-4m|\
- poray,m4-8m|\
- poray,x5|\
- poray,x8)
- lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
- ;;
- sitecom,wlr-6000)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
- ;;
- sparklan,wcr-150gn|\
- wiznet,wizfi630a|\
- zyxel,keenetic-omni|\
- zyxel,keenetic-omni-ii|\
- zyxel,keenetic-viva)
- wan_mac=$(mtd_get_mac_binary factory 0x28)
- ;;
- tenda,w306r-v2)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
- ;;
- trendnet,tew-691gr)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
- ;;
- vocore,vocore2|\
- vocore,vocore2-lite)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- xiaomi,mir3g)
- lan_mac=$(mtd_get_mac_binary factory 0xe006)
- ;;
- xiaomi,mir3g-v2)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$wan_mac
- ;;
- xiaomi,mir3p)
- lan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$lan_mac
- ;;
- zbtlink,zbt-we1326)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- *)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
- ;;
- esac
-
- [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
- [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
- [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ramips_setup_interfaces $board
-ramips_setup_macs $board
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-dlink,dir-510l)
- ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
- ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
- ;;
-head-weblink,hdrm200)
- ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
- ucidef_add_gpio_switch "io1" "I/O 1" "1"
- ucidef_add_gpio_switch "io2" "I/O 2" "2"
- ucidef_add_gpio_switch "io3" "I/O 3" "11"
- ucidef_add_gpio_switch "io4" "I/O 4" "14"
- ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1"
- ;;
-mikrotik,rb750gr3)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
- ;;
-telco-electronics,x1)
- ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
- ;;
-ubiquiti,edgerouterx)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
- ;;
-ubiquiti,edgerouterx-sfp)
- ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496"
- ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497"
- ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498"
- ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
- ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
- ;;
-zbtlink,zbt-we826-e)
- ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13"
- ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-jboot_eeprom_extract() {
- local part=$1
- local offset=$2
- local mtd
-
- mtd=$(find_mtd_part $part)
- [ -n "$mtd" ] || \
- caldata_die "no mtd device found for partition $part"
-
- jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE 2>/dev/null || \
- caldata_die "failed to extract from $mtd"
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"soc_wmac.eeprom")
- case $board in
- dlink,dir-510l|\
- dlink,dwr-116-a1|\
- dlink,dwr-118-a1|\
- dlink,dwr-118-a2|\
- dlink,dwr-921-c1|\
- dlink,dwr-922-e2|\
- lava,lr-25g001)
- wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
- wifi_mac=$(macaddr_add "$wan_mac" 1)
- jboot_eeprom_extract "config" 0xE000
- caldata_patch_mac $wifi_mac 0x4
- ;;
- dovado,tiny-ac)
- wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
- caldata_extract "factory" 0x0 0x200
- caldata_patch_mac $wifi_mac 0x4
- ;;
- *)
- caldata_die "Please define mtd-eeprom in $board DTS file!"
- ;;
- esac
- ;;
-esac
+++ /dev/null
-#!/bin/sh
-
-# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
-# tftp mode when the check fails. Initializing the JFFS2 partition triggers
-# this, so we make sure to zero checksum and size to be checksummed before
-# that happens, so this needs to run very early during boot.
-
-do_checksumming_disable() {
- . /lib/functions.sh
-
- local board=$(board_name)
-
- case "$board" in
- netgear,wnce2001)
- echo "Board is WNCE2001, updating checksum partition..."
- local zeroes=/dev/zero
- local tmpfile=/tmp/wnce2001_checksum
- local partname=checksum
- local mtd=$(find_mtd_part $partname)
- dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null
- signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null)
- checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
- if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then
- echo "Signature of checksum partition is wrong, bailing."
- return 0
- fi
- if [ "$checksum" != "00000000" ]; then
- echo "Checksum is set, zeroing."
- # zero out checksum
- dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null
- # zero out bytecount to be checksummed
- dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null
- mtd write $tmpfile $partname
- else
- echo "Checksum is already zero, nothing to do."
- fi
- ;;
- asus,rt-n56u)
- echo "Board is ASUS RT-N56U, replacing uImage header..."
- local firmware_mtd=$(find_mtd_part firmware)
- local rootfs_mtd=$(find_mtd_part rootfs)
- local rootfs_data_mtd=$(find_mtd_part rootfs_data)
- local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
- local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
- if [ "$signature" = "27051956" ]; then
- dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
- fi
- ;;
- esac
-
- return 0
-}
-
-boot_hook_add preinit_main do_checksumming_disable
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-platform_check_image() {
- return 0
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
-
- case "$board" in
- mikrotik,rb750gr3|\
- mikrotik,rbm11g|\
- mikrotik,rbm33g)
- [ -z "$(rootfs_type)" ] && mtd erase firmware
- ;;
- asus,rt-ac65p|\
- asus,rt-ac85p)
- echo "Backing up firmware"
- dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
- dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
- mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
- ;;
- esac
-
- case "$board" in
- asus,rt-ac65p|\
- asus,rt-ac85p|\
- hiwifi,hc5962|\
- netgear,r6220|\
- netgear,r6260|\
- netgear,r6350|\
- netgear,r6850|\
- xiaomi,mir3g|\
- xiaomi,mir3p)
- nand_do_upgrade "$1"
- ;;
- tplink,archer-c50-v4)
- MTD_ARGS="-t romfile"
- default_do_upgrade "$1"
- ;;
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp)
- platform_upgrade_ubnt_erx "$1"
- ;;
- *)
- default_do_upgrade "$1"
- ;;
- esac
-}
+++ /dev/null
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-. /lib/functions.sh
-#Note: this code also uses some functions from nand.sh, but it is expected to be run by nand.sh, so we are not
-#sourcing it explicitly here
-
-UBNT_ERX_KERNEL_INDEX_OFFSET=160
-
-ubnt_get_target_kernel() {
- local factory_mtd=$1
- local current_kernel_index=$(hexdump -s $UBNT_ERX_KERNEL_INDEX_OFFSET -n 1 -e '/1 "%X "' ${factory_mtd})
-
- if [ $current_kernel_index == "0" ]; then
- echo 'kernel2'
- elif [ $current_kernel_index == "1" ]; then
- echo 'kernel1'
- fi
-}
-
-ubnt_update_target_kernel() {
- local factory_mtd=$1
- local kernel_part=$2
-
- local new_kernel_index
- if [ $kernel_part == "kernel1" ]; then
- new_kernel_index="\x00"
- elif [ $kernel_part == "kernel2" ]; then
- new_kernel_index="\x01"
- else
- echo 'Unknown kernel image index' >&2
- return 1
- fi
-
- if ! (echo -e $new_kernel_index | dd of=${factory_mtd} bs=1 count=1 seek=$UBNT_ERX_KERNEL_INDEX_OFFSET); then
- echo 'Failed to update kernel bootup index' >&2
- return 1
- fi
-}
-
-platform_upgrade_ubnt_erx() {
- local factory_mtd=$(find_mtd_part factory)
- if [ -z "$factory_mtd" ]; then
- echo "cannot find factory partition" >&2
- exit 1
- fi
-
- local kernel_part="$(ubnt_get_target_kernel ${factory_mtd})"
- if [ -z "$kernel_part" ]; then
- echo "cannot find factory partition" >&2
- exit 1
- fi
-
- # This is a global defined in nand.sh, sets partition kernel will be flashed into
- CI_KERNPART=${kernel_part}
-
- #Remove volume possibly left over from stock firmware
- local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
- if [ -z "$ubidev" ]; then
- local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
- if [ -z "$mtdnum" ]; then
- echo "cannot find ubi mtd partition $CI_UBIPART" >&2
- exit 1
- fi
- ubiattach -m "$mtdnum"
- sync
- ubidev="$( nand_find_ubi "$CI_UBIPART" )"
- fi
- if [ -n "$ubidev" ]; then
- local troot_ubivol="$( nand_find_volume $ubidev troot )"
- [ -n "$troot_ubivol" ] && ubirmvol /dev/$ubidev -N troot || true
- fi
-
- ubnt_update_target_kernel ${factory_mtd} ${kernel_part} || exit 1
-
- nand_do_upgrade "$1"
-}
+++ /dev/null
-#!/bin/sh
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-partname=""
-offset=""
-NEW_MAC=
-YES=
-
-board=$(board_name)
-case $board in
- mqmaker,witi)
- partname=factory
- offset=$((0xe000))
- ;;
- *)
- echo "Unsupported board"
- exit 1
- ;;
-esac
-
-while [ -n "$1" ]; do
- case "$1" in
- ??:??:??:??:??:??) NEW_MAC="$1";;
- -y) YES=1;;
- *)
- cat <<EOF
-Unknown option/argument '$1'
-Usage: $0 [-y] [<macaddr>]
-EOF
- exit 1
- ;;
- esac
- shift
-done
-
-ask_bool() {
- local message="$1"
- local default="$((! ${2:-0}))"
- [ -n "$YES" ] && return 0
- echo -n "$message "
- read opt
- case "$opt" in
- y|Y) return 0;;
- n|N) return 1;;
- *) return $default;;
- esac
-}
-
-convert_hex() {
- hexdump -e '/1 "%02x "'
-}
-
-gen_mac() {
- dd if=/dev/urandom bs=6 count=1 2>/dev/null
-}
-
-mac="$(mtd_get_mac_binary $partname $offset)"
-case "$mac" in
- 00:00:00:00:00:00);;
- ff:ff:ff:ff:ff:ff);;
- *)
- echo "Current MAC address: $mac"
- ask_bool "Overwrite (y/N)?" 0 || exit
- ;;
-esac
-
-if [ -n "$NEW_MAC" ]; then
- set -- $(echo "$NEW_MAC" | sed 's,:, ,g')
-else
- set -- $(gen_mac | convert_hex)
- set -- $(printf %02x $(( (0x$1 & 0xfe) | 0x02 ))) $2 $3 $4 $5 $6
-fi
-echo "New MAC address: $1:$2:$3:$4:$5:$6"
-ask_bool "Write to EEPROM (y/N)?" || exit
-
-part=$(find_mtd_part "$partname")
-[ -n "$part" ] || exit
-echo -ne "\x$1\x$2\x$3\x$4\x$5\x$6" | dd of=$part conv=notrunc bs=1 count=6 seek=$offset 2>/dev/null
-echo "Done"
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+aigale,ai-br100)
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+alfa-network,ac1200rm)
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+alfa-network,tube-e4g)
+ ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
+ ;;
+asus,rp-n53)
+ ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+asus,rt-n12p)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
+ set_wifi_led "$boardname:green:air"
+ ;;
+asus,rt-n14u)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
+ set_wifi_led "$boardname:blue:air"
+ ;;
+asus,rt-ac51u|\
+kingston,mlw221|\
+kingston,mlwg2|\
+sanlinking,d240)
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+bdcom,wap2100-sk)
+ set_wifi_led "$boardname:green:wlan2g"
+ ;;
+comfast,cf-wr800n)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
+ set_wifi_led "$boardname:white:wifi"
+ ;;
+dlink,dwr-116-a1|\
+head-weblink,hdrm200|\
+ohyeah,oy-0001|\
+planex,mzk-ex300np|\
+zbtlink,zbt-wr8305rt|\
+zyxel,keenetic-omni|\
+zyxel,keenetic-omni-ii|\
+zyxel,keenetic-viva)
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+dlink,dwr-118-a1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+dlink,dwr-118-a2)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+dlink,dwr-921-c1|\
+dlink,dwr-922-e2)
+ set_wifi_led "$boardname:green:wifi"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
+ ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
+ ;;
+dovado,tiny-ac)
+ set_wifi_led "$boardname:orange:wifi"
+ ;;
+edimax,br-6478ac-v2|\
+edimax,ew-7478apc)
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+edimax,ew-7476rpc|\
+edimax,ew-7478ac)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
+ ;;
+elecom,wrh-300cr)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
+ ;;
+engenius,esr600)
+ ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+glinet,gl-mt300a|\
+glinet,gl-mt300n|\
+glinet,gl-mt750)
+ set_wifi_led "$boardname:wlan"
+ ;;
+hiwifi,hc5661)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+ set_wifi_led "$boardname:blue:wlan2g"
+ ;;
+hiwifi,hc5761)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+hiwifi,hc5861)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+hnet,c108)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
+ ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
+ ;;
+iodata,wn-ac1167gr|\
+iodata,wn-ac733gr3)
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
+ ;;
+kimax,u25awf-h1)
+ set_wifi_led "u25awf:red:wifi"
+ ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
+ ;;
+kimax,u35wf)
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
+ ;;
+lava,lr-25g001)
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
+ ;;
+lenovo,newifi-y1)
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
+ ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
+ ;;
+lenovo,newifi-y1s)
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
+ ;;
+netgear,ex2700|\
+netgear,wn3000rp-v3)
+ set_wifi_led "$boardname:green:router"
+ ;;
+netgear,ex3700)
+ ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
+ ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
+ ;;
+phicomm,psg1208)
+ set_wifi_led "$boardname:white:wlan2g"
+ ;;
+planex,mzk-ex750np|\
+zbtlink,zbt-we826-e)
+ set_wifi_led "$boardname:red:wifi"
+ ;;
+tplink,archer-c2-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+tplink,archer-c20-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
+ ;;
+tplink,archer-c20i)
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
+ ;;
+tplink,archer-c50-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
+ set_wifi_led "$boardname:green:wlan5g"
+ ;;
+tplink,archer-mr200)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
+ set_wifi_led "$boardname:white:wlan"
+ ;;
+youku,yk1)
+ set_wifi_led "$boardname:blue:air"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
+ ;;
+zbtlink,zbt-ape522ii)
+ ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
+ ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
+ ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
+ ;;
+zbtlink,zbt-wa05)
+ set_wifi_led "$boardname:blue:air"
+ ;;
+zbtlink,zbt-we826-16m|\
+zbtlink,zbt-we826-32m)
+ set_wifi_led "zbt-we826:green:wifi"
+ ;;
+zbtlink,zbt-we1026-5g-16m)
+ ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
+ set_wifi_led "we1026-5g:green:wifi"
+ ;;
+zbtlink,zbt-we2026)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ aigale,ai-br100|\
+ alfa-network,ac1200rm|\
+ asus,rt-n12p|\
+ dlink,dir-810l|\
+ dlink,dwr-116-a1|\
+ dlink,dwr-921-c1|\
+ dlink,dwr-922-e2|\
+ ohyeah,oy-0001|\
+ phicomm,psg1208|\
+ phicomm,psg1218a|\
+ planex,db-wrt01|\
+ planex,mzk-750dhp|\
+ sanlinking,d240|\
+ xiaomi,miwifi-mini|\
+ youku,yk1|\
+ zbtlink,zbt-ape522ii|\
+ zbtlink,zbt-we826-16m|\
+ zbtlink,zbt-we826-32m|\
+ zbtlink,zbt-we826-e|\
+ zbtlink,zbt-wr8305rt|\
+ zyxel,keenetic-omni)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
+ alfa-network,tube-e4g|\
+ buffalo,wmr-300|\
+ dlink,dch-m225|\
+ elecom,wrh-300cr|\
+ kimax,u25awf-h1|\
+ netgear,ex2700|\
+ netgear,ex3700|\
+ netgear,wn3000rp-v3|\
+ planex,cs-qr10|\
+ planex,mzk-ex300np|\
+ planex,mzk-ex750np|\
+ ravpower,wd03|\
+ sercomm,na930)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ asus,rp-n53)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ asus,rt-ac51u)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ asus,rt-n14u|\
+ bdcom,wap2100-sk|\
+ glinet,gl-mt300a|\
+ glinet,gl-mt300n|\
+ glinet,gl-mt750|\
+ hiwifi,hc5661|\
+ tplink,archer-c20i|\
+ wrtnode,wrtnode|\
+ zbtlink,zbt-wa05)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ buffalo,whr-300hp2|\
+ buffalo,whr-600d)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
+ ;;
+ buffalo,whr-1166d)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
+ ;;
+ comfast,cf-wr800n|\
+ hnet,c108)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6@eth0"
+ ;;
+ dlink,dir-510l)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6@eth0"
+ ;;
+ dlink,dwr-118-a1)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
+ ;;
+ dlink,dwr-118-a2)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
+ ;;
+ edimax,br-6478ac-v2|\
+ tplink,archer-c2-v1)
+ ucidef_add_switch "switch1" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ edimax,ew-7476rpc|\
+ edimax,ew-7478ac|\
+ kimax,u35wf|\
+ microduino,microwrt|\
+ yukai,bocco|\
+ zbtlink,zbt-cpe102|\
+ zte,q7)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ engenius,esr600)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0"
+ ;;
+ fon,fon2601)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6@eth0"
+ ;;
+ head-weblink,hdrm200)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
+ ;;
+ hiwifi,hc5761)
+ ucidef_add_switch "switch0" \
+ "1:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ hiwifi,hc5861)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "5:wan" "6@eth0"
+ ;;
+ iodata,wn-ac1167gr|\
+ iodata,wn-ac733gr3)
+ ucidef_add_switch "switch1" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
+ kingston,mlw221)
+ ucidef_set_interface_lan "eth0.2"
+ ;;
+ kingston,mlwg2)
+ ucidef_set_interface_lan "eth0.1"
+ ;;
+ lava,lr-25g001)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
+ ;;
+ lenovo,newifi-y1)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
+ ;;
+ lenovo,newifi-y1s)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
+ ;;
+ linksys,e1700|\
+ ralink,mt7620a-mt7530-evb)
+ ucidef_add_switch "switch1" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
+ nexx,wt3020-4m|\
+ nexx,wt3020-8m)
+ ucidef_add_switch "switch0" \
+ "4:lan" "0:wan" "6@eth0"
+ ;;
+ phicomm,k2g)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
+ ;;
+ phicomm,psg1218b)
+ ucidef_add_switch "switch0" \
+ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
+ ;;
+ tplink,archer-c20-v1|\
+ tplink,archer-c50-v1)
+ ucidef_add_switch "switch0" \
+ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
+ ;;
+ tplink,archer-mr200)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
+ ucidef_set_interface_wan "usb0"
+ ;;
+ vonets,var11n-300)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6@eth0"
+ ;;
+ zbtlink,zbt-we1026-5g-16m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6t@eth0"
+ ;;
+ zbtlink,zbt-we2026)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+ ;;
+ zyxel,keenetic-omni-ii)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+ ;;
+ zyxel,keenetic-viva)
+ ucidef_add_switch "switch1" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ buffalo,whr-1166d|\
+ buffalo,whr-300hp2|\
+ buffalo,whr-600d|\
+ xiaomi,miwifi-mini)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dch-m225)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ ;;
+ dlink,dir-510l|\
+ dlink,dwr-116-a1|\
+ dlink,dwr-118-a1|\
+ dlink,dwr-118-a2|\
+ dlink,dwr-921-c1|\
+ dlink,dwr-922-e2|\
+ lava,lr-25g001)
+ wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
+ lan_mac=$(macaddr_add "$wan_mac" 1)
+ label_mac=$wan_mac
+ ;;
+ dovado,tiny-ac)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
+ ;;
+ edimax,br-6478ac-v2)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
+ engenius,esr600)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ glinet,gl-mt300a|\
+ glinet,gl-mt300n|\
+ glinet,gl-mt750)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ hiwifi,hc5661|\
+ hiwifi,hc5761|\
+ hiwifi,hc5861)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iodata,wn-ac1167gr|\
+ iodata,wn-ac733gr3)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ lenovo,newifi-y1|\
+ lenovo,newifi-y1s|\
+ ohyeah,oy-0001|\
+ phicomm,k2g)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ linksys,e1700)
+ wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
+ ;;
+ zyxel,keenetic-omni|\
+ zyxel,keenetic-omni-ii|\
+ zyxel,keenetic-viva)
+ wan_mac=$(mtd_get_mac_binary factory 0x28)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+dlink,dir-510l)
+ ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
+ ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
+ ;;
+head-weblink,hdrm200)
+ ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
+ ucidef_add_gpio_switch "io1" "I/O 1" "1"
+ ucidef_add_gpio_switch "io2" "I/O 2" "2"
+ ucidef_add_gpio_switch "io3" "I/O 3" "11"
+ ucidef_add_gpio_switch "io4" "I/O 4" "14"
+ ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1"
+ ;;
+zbtlink,zbt-we826-e)
+ ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13"
+ ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+jboot_eeprom_extract() {
+ local part=$1
+ local offset=$2
+ local mtd
+
+ mtd=$(find_mtd_part $part)
+ [ -n "$mtd" ] || \
+ caldata_die "no mtd device found for partition $part"
+
+ jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE 2>/dev/null || \
+ caldata_die "failed to extract from $mtd"
+}
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"soc_wmac.eeprom")
+ case $board in
+ dlink,dir-510l|\
+ dlink,dwr-116-a1|\
+ dlink,dwr-118-a1|\
+ dlink,dwr-118-a2|\
+ dlink,dwr-921-c1|\
+ dlink,dwr-922-e2|\
+ lava,lr-25g001)
+ wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
+ wifi_mac=$(macaddr_add "$wan_mac" 1)
+ jboot_eeprom_extract "config" 0xE000
+ caldata_patch_mac $wifi_mac 0x4
+ ;;
+ dovado,tiny-ac)
+ wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
+ caldata_extract "factory" 0x0 0x200
+ caldata_patch_mac $wifi_mac 0x4
+ ;;
+ *)
+ caldata_die "Please define mtd-eeprom in $board DTS file!"
+ ;;
+ esac
+ ;;
+esac
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+d-team,newifi-d2)
+ ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
+ ;;
+d-team,pbr-m1|\
+gehua,ghl-r-001)
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ ;;
+dlink,dir-860l-b1)
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
+ ;;
+gnubee,gb-pc1|\
+gnubee,gb-pc2)
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
+ ;;
+mikrotik,rbm11g)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
+ ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
+ ;;
+mtc,wr1201)
+ ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
+ ;;
+netgear,r6220|\
+netgear,r6260|\
+netgear,r6350|\
+netgear,r6850|\
+netgear,wndr3700-v5)
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ;;
+tplink,re350-v1|\
+tplink,re650-v1)
+ ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
+ ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
+ ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
+ ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
+ ;;
+xiaomi,mir3g)
+ ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
+ ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
+ ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
+ ;;
+xiaomi,mir3p)
+ ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
+ ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
+ ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
+ ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
+ ;;
+xzwifi,creativebox-v1)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
+ ;;
+youhua,wr1200js)
+ ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ adslr,g7|\
+ afoundry,ew1200|\
+ d-team,pbr-m1|\
+ firefly,firewrt|\
+ hiwifi,hc5962|\
+ mediatek,ap-mt7621a-v60|\
+ mediatek,mt7621-eval-board|\
+ mqmaker,witi|\
+ mtc,wr1201|\
+ netis,wf-2881|\
+ phicomm,k2p|\
+ planex,vr500|\
+ samknows,whitebox-v8|\
+ storylink,sap-g3200u3|\
+ telco-electronics,x1|\
+ totolink,a7000r|\
+ unielec,u7621-06-16m|\
+ unielec,u7621-06-64m|\
+ xiaoyu,xy-c5|\
+ xzwifi,creativebox-v1|\
+ youku,yk-l2|\
+ zbtlink,zbt-we1326|\
+ zbtlink,zbt-we3526|\
+ zbtlink,zbt-wg2626|\
+ zbtlink,zbt-wg3526-16m|\
+ zbtlink,zbt-wg3526-32m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
+ asiarf,ap7621-001)
+ ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0"
+ ;;
+ asiarf,ap7621-nv1)
+ ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0"
+ ;;
+ asus,rt-ac57u|\
+ mikrotik,rb750gr3|\
+ mikrotik,rbm33g|\
+ ubiquiti,edgerouterx|\
+ ubiquiti,edgerouterx-sfp|\
+ youhua,wr1200js)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ asus,rt-ac65p|\
+ asus,rt-ac85p|\
+ dlink,dir-860l-b1|\
+ elecom,wrc-1167ghbk2-s|\
+ elecom,wrc-1900gst|\
+ elecom,wrc-2533gst|\
+ iodata,wn-ax1167gr|\
+ iodata,wn-gx300gr|\
+ iodata,wnpr2600g)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
+ buffalo,wsr-1166dhp|\
+ buffalo,wsr-600dhp)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
+ ;;
+ d-team,newifi-d2|\
+ wevo,11acnas|\
+ wevo,w2914ns-v2)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+ ;;
+ edimax,rg21s)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
+ gehua,ghl-r-001)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+ ;;
+ gnubee,gb-pc1|\
+ gnubee,gb-pc2)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:lan" "6@eth0"
+ ;;
+ lenovo,newifi-d1)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
+ ;;
+ linksys,re6500)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
+ ;;
+ mikrotik,rbm11g|\
+ thunder,timecloud)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ netgear,ex6150|\
+ tplink,re350-v1|\
+ tplink,re650-v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6@eth0"
+ ;;
+ netgear,r6220|\
+ netgear,r6260|\
+ netgear,r6350|\
+ netgear,r6850|\
+ netgear,wndr3700-v5)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
+ xiaomi,mir3g)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
+ ;;
+ xiaomi,mir3g-v2)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
+ xiaomi,mir3p)
+ ucidef_add_switch "switch0" \
+ "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ asus,rt-ac57u|\
+ d-team,newifi-d2|\
+ d-team,pbr-m1|\
+ elecom,wrc-1167ghbk2-s|\
+ elecom,wrc-1900gst|\
+ elecom,wrc-2533gst|\
+ lenovo,newifi-d1|\
+ phicomm,k2p|\
+ planex,vr500|\
+ samknows,whitebox-v8|\
+ youhua,wr1200js|\
+ youku,yk-l2|\
+ zbtlink,zbt-we3526)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ ;;
+ asus,rt-ac65p|\
+ asus,rt-ac85p)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ buffalo,wsr-1166dhp)
+ local index="$(find_mtd_index "board_data")"
+ wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+ lan_mac=$wan_mac
+ ;;
+ buffalo,wsr-600dhp)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dir-860l-b1)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ wan_mac=$(mtd_get_mac_ascii factory wanmac)
+ label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
+ ;;
+ edimax,rg21s)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ hiwifi,hc5962)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iodata,wn-ax1167gr|\
+ iodata,wn-gx300gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+ ;;
+ iodata,wnpr2600g)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ label_mac=$wan_mac
+ ;;
+ netgear,r6260|\
+ netgear,r6350|\
+ netgear,r6850)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
+ xiaomi,mir3g)
+ lan_mac=$(mtd_get_mac_binary factory 0xe006)
+ ;;
+ xiaomi,mir3g-v2)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$wan_mac
+ ;;
+ xiaomi,mir3p)
+ lan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$lan_mac
+ ;;
+ zbtlink,zbt-we1326)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ zbtlink,zbt-wg3526-16m|\
+ zbtlink,zbt-wg3526-32m)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+mikrotik,rb750gr3)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
+ ;;
+telco-electronics,x1)
+ ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
+ ;;
+ubiquiti,edgerouterx)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
+ ;;
+ubiquiti,edgerouterx-sfp)
+ ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496"
+ ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497"
+ ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498"
+ ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
+ ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ mikrotik,rb750gr3|\
+ mikrotik,rbm11g|\
+ mikrotik,rbm33g)
+ [ -z "$(rootfs_type)" ] && mtd erase firmware
+ ;;
+ asus,rt-ac65p|\
+ asus,rt-ac85p)
+ echo "Backing up firmware"
+ dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
+ dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
+ mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
+ ;;
+ esac
+
+ case "$board" in
+ asus,rt-ac65p|\
+ asus,rt-ac85p|\
+ hiwifi,hc5962|\
+ netgear,r6220|\
+ netgear,r6260|\
+ netgear,r6350|\
+ netgear,r6850|\
+ xiaomi,mir3g|\
+ xiaomi,mir3p)
+ nand_do_upgrade "$1"
+ ;;
+ ubiquiti,edgerouterx|\
+ ubiquiti,edgerouterx-sfp)
+ platform_upgrade_ubnt_erx "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions.sh
+#Note: this code also uses some functions from nand.sh, but it is expected to be run by nand.sh, so we are not
+#sourcing it explicitly here
+
+UBNT_ERX_KERNEL_INDEX_OFFSET=160
+
+ubnt_get_target_kernel() {
+ local factory_mtd=$1
+ local current_kernel_index=$(hexdump -s $UBNT_ERX_KERNEL_INDEX_OFFSET -n 1 -e '/1 "%X "' ${factory_mtd})
+
+ if [ $current_kernel_index == "0" ]; then
+ echo 'kernel2'
+ elif [ $current_kernel_index == "1" ]; then
+ echo 'kernel1'
+ fi
+}
+
+ubnt_update_target_kernel() {
+ local factory_mtd=$1
+ local kernel_part=$2
+
+ local new_kernel_index
+ if [ $kernel_part == "kernel1" ]; then
+ new_kernel_index="\x00"
+ elif [ $kernel_part == "kernel2" ]; then
+ new_kernel_index="\x01"
+ else
+ echo 'Unknown kernel image index' >&2
+ return 1
+ fi
+
+ if ! (echo -e $new_kernel_index | dd of=${factory_mtd} bs=1 count=1 seek=$UBNT_ERX_KERNEL_INDEX_OFFSET); then
+ echo 'Failed to update kernel bootup index' >&2
+ return 1
+ fi
+}
+
+platform_upgrade_ubnt_erx() {
+ local factory_mtd=$(find_mtd_part factory)
+ if [ -z "$factory_mtd" ]; then
+ echo "cannot find factory partition" >&2
+ exit 1
+ fi
+
+ local kernel_part="$(ubnt_get_target_kernel ${factory_mtd})"
+ if [ -z "$kernel_part" ]; then
+ echo "cannot find factory partition" >&2
+ exit 1
+ fi
+
+ # This is a global defined in nand.sh, sets partition kernel will be flashed into
+ CI_KERNPART=${kernel_part}
+
+ #Remove volume possibly left over from stock firmware
+ local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
+ if [ -z "$ubidev" ]; then
+ local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
+ if [ -z "$mtdnum" ]; then
+ echo "cannot find ubi mtd partition $CI_UBIPART" >&2
+ exit 1
+ fi
+ ubiattach -m "$mtdnum"
+ sync
+ ubidev="$( nand_find_ubi "$CI_UBIPART" )"
+ fi
+ if [ -n "$ubidev" ]; then
+ local troot_ubivol="$( nand_find_volume $ubidev troot )"
+ [ -n "$troot_ubivol" ] && ubirmvol /dev/$ubidev -N troot || true
+ fi
+
+ ubnt_update_target_kernel ${factory_mtd} ${kernel_part} || exit 1
+
+ nand_do_upgrade "$1"
+}
--- /dev/null
+#!/bin/sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+partname=""
+offset=""
+NEW_MAC=
+YES=
+
+board=$(board_name)
+case $board in
+ mqmaker,witi)
+ partname=factory
+ offset=$((0xe000))
+ ;;
+ *)
+ echo "Unsupported board"
+ exit 1
+ ;;
+esac
+
+while [ -n "$1" ]; do
+ case "$1" in
+ ??:??:??:??:??:??) NEW_MAC="$1";;
+ -y) YES=1;;
+ *)
+ cat <<EOF
+Unknown option/argument '$1'
+Usage: $0 [-y] [<macaddr>]
+EOF
+ exit 1
+ ;;
+ esac
+ shift
+done
+
+ask_bool() {
+ local message="$1"
+ local default="$((! ${2:-0}))"
+ [ -n "$YES" ] && return 0
+ echo -n "$message "
+ read opt
+ case "$opt" in
+ y|Y) return 0;;
+ n|N) return 1;;
+ *) return $default;;
+ esac
+}
+
+convert_hex() {
+ hexdump -e '/1 "%02x "'
+}
+
+gen_mac() {
+ dd if=/dev/urandom bs=6 count=1 2>/dev/null
+}
+
+mac="$(mtd_get_mac_binary $partname $offset)"
+case "$mac" in
+ 00:00:00:00:00:00);;
+ ff:ff:ff:ff:ff:ff);;
+ *)
+ echo "Current MAC address: $mac"
+ ask_bool "Overwrite (y/N)?" 0 || exit
+ ;;
+esac
+
+if [ -n "$NEW_MAC" ]; then
+ set -- $(echo "$NEW_MAC" | sed 's,:, ,g')
+else
+ set -- $(gen_mac | convert_hex)
+ set -- $(printf %02x $(( (0x$1 & 0xfe) | 0x02 ))) $2 $3 $4 $5 $6
+fi
+echo "New MAC address: $1:$2:$3:$4:$5:$6"
+ask_bool "Write to EEPROM (y/N)?" || exit
+
+part=$(find_mtd_part "$partname")
+[ -n "$part" ] || exit
+echo -ne "\x$1\x$2\x$3\x$4\x$5\x$6" | dd of=$part conv=notrunc bs=1 count=6 seek=$offset 2>/dev/null
+echo "Done"
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+alfa-network,awusfree1)
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+cudy,wr1000)
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
+ ;;
+glinet,gl-mt300n-v2)
+ set_wifi_led "$boardname:red:wlan"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
+ ;;
+hilink,hlk-7628n|\
+skylab,skw92a)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+hiwifi,hc5661a|\
+hiwifi,hc5761a)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
+ ;;
+mediatek,linkit-smart-7688)
+ ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
+ ;;
+netgear,r6120)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
+ ;;
+rakwireless,rak633)
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+tama,w06)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+ ;;
+tplink,archer-c20-v4)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
+ ;;
+tplink,archer-c50-v3|\
+tplink,archer-c50-v4)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
+ ;;
+tplink,tl-mr3020-v3)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ;;
+tplink,tl-mr3420-v5|\
+tplink,tl-wr842n-v5)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wa801nd-v5)
+ ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
+ ;;
+tplink,tl-wr840n-v4)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr841n-v13)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr841n-v14)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr902ac-v3)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
+ ;;
+unielec,u7628-01-16m)
+ ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
+ set_wifi_led "u7628-01:green:wlan"
+ ;;
+wavlink,wl-wn570ha1)
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
+ ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
+ ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+wavlink,wl-wn575a3)
+ ucidef_set_rssimon "wlan1" "200000" "1"
+ ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
+ ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
+ ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
+ ;;
+zbtlink,zbt-we1226)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
+ ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
+ ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
+ ;;
+zyxel,keenetic-extra-ii)
+ set_wifi_led "$boardname:green:wifi"
+ ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ alfa-network,awusfree1|\
+ d-team,pbr-d1|\
+ tama,w06|\
+ tplink,tl-mr3020-v3|\
+ tplink,tl-wr802n-v4)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ buffalo,wcr-1166ds)
+ ucidef_add_switch "switch0" \
+ "3:lan" "4:wan" "6@eth0"
+ ;;
+ cudy,wr1000)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
+ duzun,dm06)
+ ucidef_add_switch "switch0" \
+ "1:lan" "0:wan" "6@eth0"
+ ;;
+ glinet,gl-mt300n-v2)
+ ucidef_add_switch "switch0" \
+ "1:lan" "0:wan" "6@eth0"
+ ;;
+ glinet,vixmini)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6@eth0"
+ ;;
+ hilink,hlk-7628n|\
+ hiwifi,hc5861b|\
+ skylab,skw92a|\
+ tplink,archer-c20-v4|\
+ tplink,archer-c50-v3|\
+ tplink,archer-c50-v4|\
+ tplink,tl-mr3420-v5|\
+ tplink,tl-wr840n-v4|\
+ tplink,tl-wr840n-v5|\
+ tplink,tl-wr841n-v13|\
+ tplink,tl-wr841n-v14|\
+ tplink,tl-wr842n-v5|\
+ unielec,u7628-01-16m|\
+ wrtnode,wrtnode2p|\
+ wrtnode,wrtnode2r|\
+ zyxel,keenetic-extra-ii)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ hiwifi,hc5661a|\
+ hiwifi,hc5761a|\
+ mediatek,mt7628an-eval-board|\
+ mercury,mac1200r-v2|\
+ totolink,lr1200|\
+ wavlink,wl-wn570ha1|\
+ wavlink,wl-wn575a3|\
+ xiaomi,miwifi-nano)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
+ iptime,a3)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "0:wan" "6@eth0"
+ ;;
+ iptime,a604m)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
+ mediatek,linkit-smart-7688|\
+ onion,omega2p|\
+ onion,omega2|\
+ tplink,tl-wa801nd-v5|\
+ widora,neo-16m|\
+ widora,neo-32m)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ netgear,r6120)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
+ rakwireless,rak633)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ tplink,tl-wr902ac-v3)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6@eth0"
+ ;;
+ vocore,vocore2|\
+ vocore,vocore2-lite)
+ ucidef_add_switch "switch0" \
+ "0:lan" "2:lan" "6t@eth0"
+ ;;
+ wiznet,wizfi630s)
+ ucidef_add_switch "switch0" \
+ "0:wan" "3:lan" "4:lan" "6@eth0"
+ ;;
+ xiaomi,mir4a-100m)
+ ucidef_add_switch "switch0" \
+ "4:lan:1" "2:lan:2" "0:wan" "6@eth0"
+ ;;
+ zbtlink,zbt-we1226)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ buffalo,wcr-1166ds)
+ local index="$(find_mtd_index "board_data")"
+ wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+ lan_mac=$wan_mac
+ ;;
+ cudy,wr1000)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ glinet,gl-mt300n-v2)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ hilink,hlk-7628n)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ hiwifi,hc5661a|\
+ hiwifi,hc5761a|\
+ hiwifi,hc5861b)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iptime,a3|\
+ iptime,a604m)
+ wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
+ ;;
+ mediatek,linkit-smart-7688|\
+ onion,omega2|\
+ onion,omega2p)
+ wan_mac=$(mtd_get_mac_binary factory 0x4)
+ lan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ mercury,mac1200r-v2)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
+ ;;
+ skylab,skw92a|\
+ totolink,lr1200)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ vocore,vocore2|\
+ vocore,vocore2-lite)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ tplink,archer-c50-v4)
+ MTD_ARGS="-t romfile"
+ default_do_upgrade "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+airlink101,ar670w|\
+airlink101,ar725w)
+ set_wifi_led "rt2800soc-phy0::radio"
+ ;;
+belkin,f5d8235-v1)
+ set_wifi_led "$boardname:blue:wireless"
+ ;;
+ralink,v11st-fe)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ airlink101,ar670w|\
+ airlink101,ar725w)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ asus,rt-n15)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+ belkin,f5d8235-v1|\
+ buffalo,wzr-agl300nh|\
+ ralink,v11st-fe)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ ;;
+ buffalo,wli-tx4-ag300n|\
+ dlink,dap-1522-a1)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+7links,px-4885-4m|\
+7links,px-4885-8m)
+ set_wifi_led "px-4885:orange:wifi"
+ ;;
+airlive,air3gii|\
+aximcom,mr-102n|\
+edimax,3g-6200nl|\
+netgear,wnce2001)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+alfa-network,w502u|\
+dlink,dir-300-b1|\
+dlink,dir-300-b7|\
+dlink,dir-320-b1|\
+dlink,dir-600-b1|\
+dlink,dir-610-a1|\
+dlink,dir-615-d|\
+dlink,dir-615-h1|\
+dlink,dir-620-a1|\
+engenius,esr-9753|\
+hilink,hlk-rm04|\
+nexx,wt1520-4m|\
+nexx,wt1520-8m|\
+skyline,sl-r7205|\
+tenda,w306r-v2|\
+zyxel,keenetic-start|\
+zyxel,keenetic|\
+zyxel,nbg-419n-v2)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+allnet,all0256n-4m|\
+allnet,all0256n-8m)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+alphanetworks,asl26555-8m|\
+alphanetworks,asl26555-16m)
+ ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
+ set_wifi_led "asl26555:green:wlan"
+ ;;
+asiarf,awapn2403)
+ set_wifi_led "rt2800soc-phy0::radio"
+ ;;
+dlink,dcs-930l-b1)
+ ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
+ ;;
+dlink,dir-620-d1|\
+trendnet,tew-714tru)
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+edimax,3g-6200n|\
+planex,mzk-w300nh2)
+ set_wifi_led "$boardname:amber:wlan"
+ ;;
+fon,fonera-20n)
+ set_wifi_led "$boardname:orange:wifi"
+ ;;
+hauppauge,broadway)
+ set_wifi_led "$boardname:red:wps_active"
+ ;;
+hootoo,ht-tm02)
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+huawei,hg255d)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
+ ;;
+intenso,memory2move)
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
+ ;;
+omnima,miniembplug)
+ set_wifi_led "$boardname:red:wlan"
+ ;;
+vocore,vocore-8m|\
+vocore,vocore-16m)
+ ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
+ ;;
+zorlik,zl5900v2)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_rt3x5x_vlans()
+{
+ if [ ! -x /sbin/swconfig ]; then
+ # legacy default
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ return
+ fi
+ local wanports=""
+ local lanports=""
+ for port in 5 4 3 2 1 0; do
+ if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
+ continue
+ fi
+ if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
+ wanports="$port:wan $wanports"
+ else
+ lanports="$port:lan $lanports"
+ fi
+ done
+ ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
+}
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ accton,wr6202|\
+ alfa-network,w502u|\
+ netcore,nw718|\
+ petatel,psr-680w|\
+ skyline,sl-r7205|\
+ upvel,ur-336un)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ allnet,all0256n-4m|\
+ allnet,all0256n-8m|\
+ allnet,all5002|\
+ allnet,all5003|\
+ dlink,dcs-930l-b1|\
+ dlink,dcs-930|\
+ hame,mpr-a2|\
+ hauppauge,broadway|\
+ hootoo,ht-tm02|\
+ intenso,memory2move|\
+ netgear,wnce2001|\
+ tenda,3g150b|\
+ tenda,3g300m|\
+ tenda,w150m|\
+ unbranded,a5-v11|\
+ wansview,ncs601w|\
+ zorlik,zl5900v2)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ alphanetworks,asl26555-8m|\
+ alphanetworks,asl26555-16m)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+ ;;
+ argus,atp-52b|\
+ asiarf,awm002-evb-4m|\
+ asiarf,awm002-evb-8m|\
+ jcg,jhr-n805r|\
+ jcg,jhr-n825r|\
+ jcg,jhr-n926r|\
+ planex,mzk-wdpr|\
+ upvel,ur-326n4g)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ asiarf,awapn2403)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:wan" "6@eth0"
+ ;;
+ asus,wl-330n|\
+ easyacc,wizard-8800)
+ ucidef_set_interface_lan "eth0.1"
+ ;;
+ aximcom,mr-102n)
+ ucidef_set_interface_lan "eth0.2"
+ ;;
+ belkin,f5d8235-v2|\
+ trendnet,tew-714tru)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ ;;
+ buffalo,whr-g300n|\
+ dlink,dir-300-b7|\
+ dlink,dir-320-b1|\
+ dlink,dir-610-a1|\
+ edimax,3g-6200n|\
+ hilink,hlk-rm04|\
+ nixcore,x1-16m|\
+ nixcore,x1-8m|\
+ planex,mzk-w300nh2|\
+ zyxel,keenetic)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
+ dlink,dir-615-h1)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+ ;;
+ huawei,d105)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ huawei,hg255d)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
+ nexx,wt1520-4m|\
+ nexx,wt1520-8m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6@eth0"
+ ;;
+ planex,mzk-dp150n|\
+ vocore,vocore-8m|\
+ vocore,vocore-16m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:lan" "6t@eth0"
+ ;;
+ sitecom,wl-351)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+ sparklan,wcr-150gn)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6t@eth0"
+ ;;
+ trendnet,tew-638apb-v2)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6@eth0"
+ ;;
+ wiznet,wizfi630a)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:wan" "6@eth0"
+ ;;
+ zyxel,keenetic-start)
+ ucidef_add_switch "switch0" \
+ "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
+ ;;
+ *)
+ RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
+ if [ -n "${RT3X5X}" ]; then
+ ramips_setup_rt3x5x_vlans
+ else
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ fi
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ 8devices,carambola|\
+ alfa-network,w502u|\
+ arcwireless,freestation5|\
+ netgear,wnce2001)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ buffalo,whr-g300n|\
+ zyxel,keenetic-start)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dir-300-b7|\
+ dlink,dir-320-b1|\
+ dlink,dir-620-a1|\
+ engenius,esr-9753|\
+ hame,mpr-a1|\
+ hauppauge,broadway|\
+ huawei,d105|\
+ hilink,hlk-rm04|\
+ nexaira,bc2|\
+ petatel,psr-680w|\
+ skyline,sl-r7205)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ dlink,dir-615-d|\
+ dlink,dir-615-h1)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ poray,m3|\
+ poray,m4-4m|\
+ poray,m4-8m|\
+ poray,x5|\
+ poray,x8)
+ lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
+ ;;
+ sparklan,wcr-150gn|\
+ wiznet,wizfi630a)
+ wan_mac=$(mtd_get_mac_binary factory 0x28)
+ ;;
+ tenda,w306r-v2)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
+# tftp mode when the check fails. Initializing the JFFS2 partition triggers
+# this, so we make sure to zero checksum and size to be checksummed before
+# that happens, so this needs to run very early during boot.
+
+do_checksumming_disable() {
+ . /lib/functions.sh
+
+ local board=$(board_name)
+
+ case "$board" in
+ netgear,wnce2001)
+ echo "Board is WNCE2001, updating checksum partition..."
+ local zeroes=/dev/zero
+ local tmpfile=/tmp/wnce2001_checksum
+ local partname=checksum
+ local mtd=$(find_mtd_part $partname)
+ dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null
+ signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null)
+ checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
+ if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then
+ echo "Signature of checksum partition is wrong, bailing."
+ return 0
+ fi
+ if [ "$checksum" != "00000000" ]; then
+ echo "Checksum is set, zeroing."
+ # zero out checksum
+ dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null
+ # zero out bytecount to be checksummed
+ dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null
+ mtd write $tmpfile $partname
+ else
+ echo "Checksum is already zero, nothing to do."
+ fi
+ ;;
+ esac
+
+ return 0
+}
+
+boot_hook_add preinit_main do_checksumming_disable
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+belkin,f9k1109v1)
+ set_usb_led "$boardname:green:usb1"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
+ ;;
+edimax,br-6475nd)
+ set_wifi_led "$boardname:amber:wlan"
+ ;;
+omnima,hpm)
+ ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ asus,rt-n56u)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+ ;;
+ belkin,f9k1109v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+ ;;
+ dlink,dir-645)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+ ;;
+ edimax,br-6475nd)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
+ ;;
+ loewe,wmdr-143n|\
+ omnima,hpm)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ samsung,cy-swr1100)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
+ ;;
+ sitecom,wlr-6000|\
+ trendnet,tew-691gr|\
+ trendnet,tew-692gr)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ asus,rt-n56u)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(mtd_get_mac_binary factory 0x8004)
+ ;;
+ belkin,f9k1109v1)
+ wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
+ lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+ label_mac=$wan_mac
+ ;;
+ dlink,dir-645)
+ lan_mac=$(mtd_get_mac_ascii nvram lanmac)
+ wan_mac=$(mtd_get_mac_ascii nvram wanmac)
+ ;;
+ edimax,br-6475nd)
+ wan_mac=$(mtd_get_mac_binary devdata 0x7)
+ ;;
+ samsung,cy-swr1100)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ ;;
+ sitecom,wlr-6000)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
+ ;;
+ trendnet,tew-691gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
+ ;;
+ trendnet,tew-692gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
+# tftp mode when the check fails. Initializing the JFFS2 partition triggers
+# this, so we make sure to zero checksum and size to be checksummed before
+# that happens, so this needs to run very early during boot.
+
+do_checksumming_disable() {
+ . /lib/functions.sh
+
+ local board=$(board_name)
+
+ case "$board" in
+ asus,rt-n56u)
+ echo "Board is ASUS RT-N56U, replacing uImage header..."
+ local firmware_mtd=$(find_mtd_part firmware)
+ local rootfs_mtd=$(find_mtd_part rootfs)
+ local rootfs_data_mtd=$(find_mtd_part rootfs_data)
+ local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
+ local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
+ local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
+ local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
+ if [ "$signature" = "27051956" ]; then
+ dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
+ fi
+ ;;
+ esac
+
+ return 0
+}
+
+boot_hook_add preinit_main do_checksumming_disable
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
projects / openwrt / staging / thess.git / commitdiff