--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Ubiquiti UniFi 6 LR";
+ compatible = "ubnt,unifi-6-lr", "mediatek,mt7622";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ label-mac-device = &gmac0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512 console=ttyS0,115200n8";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 62 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x3f000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&slot0 {
+ wifi@0,0 {
+ reg = <0x0 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x20000>;
+ mtd-mac-address = <&eeprom 0x6>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pio {
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ mux {
+ function = "uart";
+ groups = "uart3_1_tx_rx" ;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c0";
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&btif {
+ status = "disabled";
+};
+
+ð {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+
+ phy-mode = "2500base-x";
+ mtd-mac-address = <&eeprom 0x0>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@8 {
+ /* Marvell AQRate AQR112W - no driver */
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x8>;
+ };
+ };
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "atf";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "u-boot";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "u-boot-env";
+ reg = <0xc0000 0x10000>;
+ };
+
+ factory: partition@d0000 {
+ label = "factory";
+ reg = <0xd0000 0x40000>;
+ read-only;
+ };
+
+ eeprom: partition@110000 {
+ label = "eeprom";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "bs";
+ reg = <0x120000 0x10000>;
+ };
+
+ partition@130000 {
+ label = "cfg";
+ reg = <0x130000 0x100000>;
+ read-only;
+ };
+
+ partition@230000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x230000 0x1ee0000>;
+ };
+
+ partition@2110000 {
+ label = "kernel1";
+ reg = <0x2110000 0x1ee0000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+
+ /* MT7915 Bluetooth */
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "ubnt,ledbar";
+ reg = <0x30>;
+
+ enable-gpio = <&pio 59 0>;
+
+ red {
+ label = "red";
+ };
+
+ green {
+ label = "green";
+ };
+
+ led_blue: blue {
+ label = "blue";
+ };
+ };
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
+
+&wmac {
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ mtd-mac-address = <&eeprom 0x0>;
+ status = "okay";
+};
--- /dev/null
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 11 Feb 2021 19:57:26 +0100
+Subject: [PATCH] mtd: spi-nor: add support for Winbond W25Q512
+
+The Winbond W25Q512 is a 512mb SPI-NOR chip. It supports 4K sectors as
+well as block protection and Dual-/Quad-read.
+
+Tested on: Ubiquiti UniFi 6 LR
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+Ref: https://patchwork.ozlabs.org/project/linux-mtd/patch/20210213151047.11700-1-mail@david-bauer.net/
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2550,6 +2550,9 @@ static const struct flash_info spi_nor_i
+ .fixups = &w25q256_fixups },
+ { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++ { "w25q512jv", INFO(0xef4020, 0, 64 * 1024, 1024,
++ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ |
++ SPI_NOR_HAS_TB | SPI_NOR_HAS_LOCK) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+
projects / openwrt / openwrt.git / commitdiff