--- /dev/null
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <asm_macros.S>
+#include <a3700_console.h>
+
+ .globl console_core_init
+ .globl console_core_putc
+ .globl console_core_getc
+ .globl console_core_flush
+
+ /* -----------------------------------------------
+ * int console_core_init(unsigned long base_addr,
+ * unsigned int uart_clk, unsigned int baud_rate)
+ * Function to initialize the console without a
+ * C Runtime to print debug information. This
+ * function will be accessed by console_init and
+ * crash reporting.
+ * In: x0 - console base address
+ * w1 - Uart clock in Hz
+ * w2 - Baud rate
+ * Out: return 1 on success
+ * Clobber list : x1, x2, x3
+ * -----------------------------------------------
+ */
+func console_core_init
+ /* Check the input base address */
+ cbz x0, init_fail
+ /* Check baud rate and uart clock for sanity */
+ cbz w1, init_fail
+ cbz w2, init_fail
+
+ /* Program the baudrate */
+ /* Divisor = Uart clock / (16 * baudrate) */
+ lsl w2, w2, #4
+ udiv w2, w1, w2
+ and w2, w2, #0x3ff
+
+ ldr w3, [x0, #UART_BAUD_REG]
+ bic w3, w3, 0x3ff
+ orr w3, w3, w2
+ str w3, [x0, #UART_BAUD_REG]/* set baud rate divisor */
+
+ /* Set UART to default 16X scheme */
+ mov w3, #0
+ str w3, [x0, #UART_POSSR_REG]
+
+ /*
+ * Wait for the TX FIFO to be empty. If wait for 20ms, the TX FIFO is
+ * still not empty, TX FIFO will reset by all means.
+ */
+ mov w1, #20 /* max time out 20ms */
+2:
+ /* Check whether TX FIFO is empty */
+ ldr w3, [x0, #UART_STATUS_REG]
+ and w3, w3, #UARTLSR_TXFIFOEMPTY
+ cmp w3, #0
+ b.ne 4f
+
+ /* Delay */
+ mov w2, #30000
+3:
+ sub w2, w2, #1
+ cmp w2, #0
+ b.ne 3b
+
+ /* Check whether 10ms is waited */
+ sub w1, w1, #1
+ cmp w1, #0
+ b.ne 2b
+
+4:
+ /* Reset FIFO */
+ mov w3, #UART_CTRL_RXFIFO_RESET
+ orr w3, w3, #UART_CTRL_TXFIFO_RESET
+ str w3, [x0, #UART_CTRL_REG]
+
+ /* Delay */
+ mov w2, #2000
+1:
+ sub w2, w2, #1
+ cmp w2, #0
+ b.ne 1b
+
+ /* No Parity, 1 Stop */
+ mov w3, #0
+ str w3, [x0, #UART_CTRL_REG]
+
+ mov w0, #1
+ ret
+init_fail:
+ mov w0, #0
+ ret
+endfunc console_core_init
+
+ /* --------------------------------------------------------
+ * int console_core_putc(int c, unsigned int base_addr)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : w0 - character to be printed
+ * x1 - console base address
+ * Out : return -1 on error else return character.
+ * Clobber list : x2
+ * --------------------------------------------------------
+ */
+func console_core_putc
+ /* Check the input parameter */
+ cbz x1, putc_error
+
+ /* Prepend '\r' to '\n' */
+ cmp w0, #0xA
+ b.ne 2f
+ /* Check if the transmit FIFO is full */
+1: ldr w2, [x1, #UART_STATUS_REG]
+ and w2, w2, #UARTLSR_TXFIFOFULL
+ cmp w2, #UARTLSR_TXFIFOFULL
+ b.eq 1b
+ mov w2, #0xD /* '\r' */
+ str w2, [x1, #UART_TX_REG]
+
+ /* Check if the transmit FIFO is full */
+2: ldr w2, [x1, #UART_STATUS_REG]
+ and w2, w2, #UARTLSR_TXFIFOFULL
+ cmp w2, #UARTLSR_TXFIFOFULL
+ b.eq 2b
+ str w0, [x1, #UART_TX_REG]
+ ret
+putc_error:
+ mov w0, #-1
+ ret
+endfunc console_core_putc
+
+ /* ---------------------------------------------
+ * int console_core_getc(void)
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 on error.
+ * In : w0 - console base address
+ * Out : return -1 on error else return character.
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_core_getc
+ /* Check if the receive FIFO is empty */
+ ret
+getc_error:
+ mov w0, #-1
+ ret
+endfunc console_core_getc
+
+ /* ---------------------------------------------
+ * int console_core_flush(uintptr_t base_addr)
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * In : x0 - console base address
+ * Out : return -1 on error else return 0.
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_core_flush
+ /* Placeholder */
+ mov w0, #0
+ ret
+endfunc console_core_flush
--- /dev/null
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __A3700_CONSOLE_H__
+#define __A3700_CONSOLE_H__
+
+/* MVEBU UART Registers */
+#define UART_RX_REG 0x00
+#define UART_TX_REG 0x04
+#define UART_CTRL_REG 0x08
+#define UART_STATUS_REG 0x0c
+#define UART_BAUD_REG 0x10
+#define UART_POSSR_REG 0x14
+
+/* FIFO Control Register bits */
+#define UARTFCR_FIFOMD_16450 (0 << 6)
+#define UARTFCR_FIFOMD_16550 (1 << 6)
+#define UARTFCR_RXTRIG_1 (0 << 6)
+#define UARTFCR_RXTRIG_4 (1 << 6)
+#define UARTFCR_RXTRIG_8 (2 << 6)
+#define UARTFCR_RXTRIG_16 (3 << 6)
+#define UARTFCR_TXTRIG_1 (0 << 4)
+#define UARTFCR_TXTRIG_4 (1 << 4)
+#define UARTFCR_TXTRIG_8 (2 << 4)
+#define UARTFCR_TXTRIG_16 (3 << 4)
+#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
+#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
+#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
+#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
+
+/* Line Control Register bits */
+#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
+#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
+#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
+#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
+#define UARTLCR_PAR (1 << 3) /* Parity */
+#define UARTLCR_STOP (1 << 2) /* Stop Bit */
+#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
+#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
+#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
+#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
+
+/* Line Status Register bits */
+#define UARTLSR_TXFIFOFULL (1 << 11) /* Tx Fifo Full */
+
+/* UART Control Register bits */
+#define UART_CTRL_RXFIFO_RESET (1 << 14)
+#define UART_CTRL_TXFIFO_RESET (1 << 15)
+#define UARTLSR_TXFIFOEMPTY (1 << 6)
+
+#endif /* __A3700_CONSOLE_H__ */
projects / project / bcm63xx / atf.git / commitdiff