[packages] switch: clean up robo switch driver

 * remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii

SVN-Revision: 33002

diff --git a/package/switch/src/switch-robo.c b/package/switch/src/switch-robo.c
index 7bac91942a098d0e9371a12e8533c90a0b8e2de2..656e69ff123ad1265706fd06a61cb20c0f45ee28 100644 (file)
--- a/package/switch/src/switch-robo.c
+++ b/package/switch/src/switch-robo.c
@@ -71,9 +71,7 @@
 struct robo_switch {
        char *device;                   /* The device name string (ethX) */
        u16 devid;                      /* ROBO_DEVICE_ID_53xx */
-       bool use_et;
        bool is_5350;
-       u8 phy_addr;                    /* PHY address of the device */
        struct ifreq ifr;
        struct net_device *dev;
        unsigned char port[6];
@@ -83,20 +81,13 @@ struct robo_switch {
 static struct robo_switch robo;
 
 
-static int do_ioctl(int cmd, void *buf)
+static int do_ioctl(int cmd)
 {
        mm_segment_t old_fs = get_fs();
        int ret;
 
-       if (buf != NULL)
-               robo.ifr.ifr_data = (caddr_t) buf;
-
        set_fs(KERNEL_DS);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)
        ret = robo.dev->netdev_ops->ndo_do_ioctl(robo.dev, &robo.ifr, cmd);
-#else
-       ret = robo.dev->do_ioctl(robo.dev, &robo.ifr, cmd);
-#endif
        set_fs(old_fs);
 
        return ret;
@@ -104,71 +95,32 @@ static int do_ioctl(int cmd, void *buf)
 
 static u16 mdio_read(__u16 phy_id, __u8 reg)
 {
-       if (robo.use_et) {
-               int args[2] = { reg };
-
-               if (phy_id != robo.phy_addr) {
-                       printk(KERN_ERR PFX
-                               "Access to real 'phy' registers unavaliable.\n"
-                               "Upgrade kernel driver.\n");
-
-                       return 0xffff;
-               }
-
-
-               if (do_ioctl(SIOCGETCPHYRD, &args) < 0) {
-                       printk(KERN_ERR PFX
-                              "[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__);
-                       return 0xffff;
-               }
-
-               return args[1];
-       } else {
-               struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &robo.ifr.ifr_data;
-               mii->phy_id = phy_id;
-               mii->reg_num = reg;
+       struct mii_ioctl_data *mii = if_mii(&robo.ifr);
+       mii->phy_id = phy_id;
+       mii->reg_num = reg;
 
-               if (do_ioctl(SIOCGMIIREG, NULL) < 0) {
-                       printk(KERN_ERR PFX
-                              "[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
+       if (do_ioctl(SIOCGMIIREG) < 0) {
+               printk(KERN_ERR PFX
+                      "[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__);
 
-                       return 0xffff;
-               }
-
-               return mii->val_out;
+               return 0xffff;
        }
+
+       return mii->val_out;
 }
 
 static void mdio_write(__u16 phy_id, __u8 reg, __u16 val)
 {
-       if (robo.use_et) {
-               int args[2] = { reg, val };
+       struct mii_ioctl_data *mii = if_mii(&robo.ifr);
 
-               if (phy_id != robo.phy_addr) {
-                       printk(KERN_ERR PFX
-                               "Access to real 'phy' registers unavaliable.\n"
-                               "Upgrade kernel driver.\n");
+       mii->phy_id = phy_id;
+       mii->reg_num = reg;
+       mii->val_in = val;
 
-                       return;
-               }
-
-               if (do_ioctl(SIOCSETCPHYWR, args) < 0) {
-                       printk(KERN_ERR PFX
-                              "[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__);
-                       return;
-               }
-       } else {
-               struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo.ifr.ifr_data;
-
-               mii->phy_id = phy_id;
-               mii->reg_num = reg;
-               mii->val_in = val;
-
-               if (do_ioctl(SIOCSMIIREG, NULL) < 0) {
-                       printk(KERN_ERR PFX
-                              "[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
-                       return;
-               }
+       if (do_ioctl(SIOCSMIIREG) < 0) {
+               printk(KERN_ERR PFX
+                      "[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__);
+               return;
        }
 }
 
@@ -177,16 +129,16 @@ static int robo_reg(__u8 page, __u8 reg, __u8 op)
        int i = 3;
 
        /* set page number */
-       mdio_write(robo.phy_addr, REG_MII_PAGE,
+       mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE,
                (page << 8) | REG_MII_PAGE_ENABLE);
 
        /* set register address */
-       mdio_write(robo.phy_addr, REG_MII_ADDR,
+       mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR,
                (reg << 8) | op);
 
        /* check if operation completed */
        while (i--) {
-               if ((mdio_read(robo.phy_addr, REG_MII_ADDR) & 3) == 0)
+               if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
                        return 0;
        }
 
@@ -203,7 +155,7 @@ static void robo_read(__u8 page, __u8 reg, __u16 *val, int count)
        robo_reg(page, reg, REG_MII_ADDR_READ);
 
        for (i = 0; i < count; i++)
-               val[i] = mdio_read(robo.phy_addr, REG_MII_DATA0 + i);
+               val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i);
 }
 */
 
@@ -211,21 +163,21 @@ static __u16 robo_read16(__u8 page, __u8 reg)
 {
        robo_reg(page, reg, REG_MII_ADDR_READ);
 
-       return mdio_read(robo.phy_addr, REG_MII_DATA0);
+       return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0);
 }
 
 static __u32 robo_read32(__u8 page, __u8 reg)
 {
        robo_reg(page, reg, REG_MII_ADDR_READ);
 
-       return mdio_read(robo.phy_addr, REG_MII_DATA0) +
-               (mdio_read(robo.phy_addr, REG_MII_DATA0 + 1) << 16);
+       return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) +
+               (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
 }
 
 static void robo_write16(__u8 page, __u8 reg, __u16 val16)
 {
        /* write data */
-       mdio_write(robo.phy_addr, REG_MII_DATA0, val16);
+       mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16);
 
        robo_reg(page, reg, REG_MII_ADDR_WRITE);
 }
@@ -233,8 +185,8 @@ static void robo_write16(__u8 page, __u8 reg, __u16 val16)
 static void robo_write32(__u8 page, __u8 reg, __u32 val32)
 {
        /* write data */
-       mdio_write(robo.phy_addr, REG_MII_DATA0, val32 & 65535);
-       mdio_write(robo.phy_addr, REG_MII_DATA0 + 1, val32 >> 16);
+       mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
+       mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
 
        robo_reg(page, reg, REG_MII_ADDR_WRITE);
 }
@@ -308,11 +260,7 @@ static int robo_probe(char *devname)
        printk(KERN_INFO PFX "Probing device %s: ", devname);
        strcpy(robo.ifr.ifr_name, devname);
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-       if ((robo.dev = dev_get_by_name(devname)) == NULL) {
-#else
        if ((robo.dev = dev_get_by_name(&init_net, devname)) == NULL) {
-#endif
                printk("No such device\n");
                return 1;
        }
@@ -323,26 +271,22 @@ static int robo_probe(char *devname)
        robo.port[5] = 8;
 
        /* try access using MII ioctls - get phy address */
-       if (do_ioctl(SIOCGMIIPHY, NULL) < 0) {
-               robo.use_et = 1;
-               robo.phy_addr = ROBO_PHY_ADDR;
-       } else {
-               /* got phy address check for robo address */
-               struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &robo.ifr.ifr_data;
-               if ((mii->phy_id != ROBO_PHY_ADDR) &&
-                   (mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
-                   (mii->phy_id != ROBO_PHY_ADDR_TG3)) {
-                       printk("Invalid phy address (%d)\n", mii->phy_id);
-                       goto done;
-               }
-               robo.use_et = 0;
-               /* The robo has a fixed PHY address that is different from the
-                * Tigon3 and BCM63xx PHY address. */
-               robo.phy_addr = ROBO_PHY_ADDR;
+       if (do_ioctl(SIOCGMIIPHY) < 0) {
+               printk("error while accessing MII phy registers with ioctls\n");
+               goto done;
+       }
+
+       /* got phy address check for robo address */
+       struct mii_ioctl_data *mii = if_mii(&robo.ifr);
+       if ((mii->phy_id != ROBO_PHY_ADDR) &&
+           (mii->phy_id != ROBO_PHY_ADDR_BCM63XX) &&
+           (mii->phy_id != ROBO_PHY_ADDR_TG3)) {
+               printk("Invalid phy address (%d)\n", mii->phy_id);
+               goto done;
        }
 
-       phyid = mdio_read(robo.phy_addr, 0x2) | 
-               (mdio_read(robo.phy_addr, 0x3) << 16);
+       phyid = mdio_read(ROBO_PHY_ADDR, 0x2) | 
+               (mdio_read(ROBO_PHY_ADDR, 0x3) << 16);
 
        if (phyid == 0xffffffff || phyid == 0x55210022) {
                printk("No Robo switch in managed mode found, phy_id = 0x%08x\n", phyid);