ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)

Don't enable local IRQs for PIO-in protocol in driver_cmd_intr().

While at it:

* Remove redundant rq->cmd_type check.

* Read status register after enabling local IRQs for no-data protocol.

v2:
* Re-add DRQ=1 check lost in v1 (noticed by Sergei).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 8c9890414eb2018c09564d0b4673e2f67d32b1c2..dc6af24a97d911010b15c75a1764fd383fb9d1a4 100644 (file)
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -638,19 +638,22 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
 {
        struct request *rq = HWGROUP(drive)->rq;
        ide_hwif_t *hwif = HWIF(drive);
-       u8 *args = (u8 *) rq->buffer;
-       u8 stat = hwif->INB(IDE_STATUS_REG);
+       u8 *args = (u8 *)rq->buffer, pio_in = (args && args[3]) ? 1 : 0, stat;
 
-       local_irq_enable_in_hardirq();
-       if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
-           (stat & DRQ_STAT) && args && args[3]) {
+       if (pio_in) {
                u8 io_32bit = drive->io_32bit;
+               stat = hwif->INB(IDE_STATUS_REG);
+               if ((stat & DRQ_STAT) == 0)
+                       goto out;
                drive->io_32bit = 0;
                hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
                drive->io_32bit = io_32bit;
                stat = wait_drive_not_busy(drive);
+       } else {
+               local_irq_enable_in_hardirq();
+               stat = hwif->INB(IDE_STATUS_REG);
        }
-
+out:
        if (!OK_STAT(stat, READY_STAT, BAD_STAT))
                return ide_error(drive, "drive_cmd", stat);
                /* calls ide_end_drive_cmd */