ifeq ($(LINUX_VERSION),2.6.24.7)
LINUX_KERNEL_MD5SUM:=40a73780d51525d28d36dec852c680c4
endif
-ifeq ($(LINUX_VERSION),2.6.25.15)
- LINUX_KERNEL_MD5SUM:=13ed94f02fc2a11615e3332e1cdf50e7
+ifeq ($(LINUX_VERSION),2.6.25.16)
+ LINUX_KERNEL_MD5SUM:=fdb0e08f0e5a2b4fe6dc711ca35f430e
endif
-ifeq ($(LINUX_VERSION),2.6.26.2)
- LINUX_KERNEL_MD5SUM:=82472622bd26bed0054790ec3e60ee00
+ifeq ($(LINUX_VERSION),2.6.26.3)
+ LINUX_KERNEL_MD5SUM:=90fe36b18dbac6e2f79374e2df60ac67
endif
# disable the md5sum check for unknown kernel versions
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-#LINUX_VERSION:=2.6.25.15
-LINUX_VERSION:=2.6.26.2
+#LINUX_VERSION:=2.6.25.16
+LINUX_VERSION:=2.6.26.3
SUBTARGETS:=router_le router_be
INITRAMFS_EXTRA_FILES:=
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
-@@ -1929,3 +1932,4 @@
+@@ -1934,3 +1937,4 @@
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
BOARDNAME:=TI AR7
FEATURES:=squashfs jffs2 atm
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Atheros AR71xx
FEATURES:=squashfs tgz broken
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
-@@ -59,31 +59,32 @@
+@@ -62,31 +62,32 @@
static char nullstring[] = "unallocated";
#endif
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
-@@ -155,6 +156,11 @@
+@@ -158,6 +159,11 @@
}
if (i == numslots) {
/* Didn't find it */
BOARDNAME:=Atmel AT91
FEATURES:=squashfs usb
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
-@@ -905,7 +905,7 @@
+@@ -904,7 +904,7 @@
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
BOARDNAME:=Atheros 231x/5312
FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
-Index: linux-2.6.26.2/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.26.2.orig/drivers/watchdog/Kconfig 2008-08-14 16:54:30.000000000 +0200
-+++ linux-2.6.26.2/drivers/watchdog/Kconfig 2008-08-14 16:55:40.000000000 +0200
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
@@ -683,6 +683,12 @@
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
# PARISC Architecture
# POWERPC Architecture
-Index: linux-2.6.26.2/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.26.2.orig/drivers/watchdog/Makefile 2008-08-14 16:55:44.000000000 +0200
-+++ linux-2.6.26.2/drivers/watchdog/Makefile 2008-08-14 16:58:16.000000000 +0200
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
@@ -97,6 +97,7 @@
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- a/drivers/net/ar2313/ar2313.c (revisione 11911)
-+++ a/drivers/net/ar2313/ar2313.c (copia locale)
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
@@ -291,7 +291,7 @@
sp->mii_bus.write = mdiobus_write;
sp->mii_bus.reset = mdiobus_reset;
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
-@@ -59,31 +59,32 @@
+@@ -62,31 +62,32 @@
static char nullstring[] = "unallocated";
#endif
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
-@@ -155,6 +156,11 @@
+@@ -158,6 +159,11 @@
}
if (i == numslots) {
/* Didn't find it */
BOARDNAME:=RMI/AMD AU1x00
FEATURES:=jffs2 usb pci
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += yamonenv
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Broadcom BCM947xx/953xx
FEATURES:=squashfs usb
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += kmod-switch kmod-diag
BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM963xx
FEATURES:=squashfs jffs2 broken usb atm
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
BOARD:=etrax
BOARDNAME:=Foxboard (ETRAX 100LX)
FEATURES:=squashfs jffs2 broken
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
# CONFIG_HZ_256 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCA is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_IBM_IIC is not set
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
-@@ -1537,7 +1537,7 @@
+@@ -1539,7 +1539,7 @@
.hw_start = rtl_hw_start_8169,
.region = 1,
.align = 0,
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = 0
-@@ -1546,7 +1546,7 @@
+@@ -1548,7 +1548,7 @@
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
-@@ -1555,7 +1555,7 @@
+@@ -1557,7 +1557,7 @@
.hw_start = rtl_hw_start_8101,
.region = 2,
.align = 8,
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
-@@ -2903,10 +2903,12 @@
+@@ -2905,10 +2905,12 @@
break;
}
static int debug;
static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
static DEFINE_MUTEX(table_lock);
-@@ -904,7 +905,7 @@
+@@ -903,7 +904,7 @@
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
-@@ -1316,3 +1317,5 @@
+@@ -1315,3 +1316,5 @@
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-Index: linux-2.6.26.2/drivers/mtd/redboot.c
-===================================================================
---- linux-2.6.26.2.orig/drivers/mtd/redboot.c 2008-08-19 19:32:17.000000000 +0200
-+++ linux-2.6.26.2/drivers/mtd/redboot.c 2008-08-19 19:47:34.000000000 +0200
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
@@ -13,6 +13,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
int nrparts = 0;
struct fis_image_desc *buf;
struct mtd_partition *parts;
-@@ -217,14 +220,14 @@
+@@ -211,14 +214,14 @@
}
}
#endif
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if (nulllen > 0) {
strcpy(nullname, nullstring);
-@@ -243,6 +246,8 @@
+@@ -237,6 +240,8 @@
}
#endif
for ( ; i<nrparts; i++) {
parts[i].size = fl->img->size;
parts[i].offset = fl->img->flash_base;
parts[i].name = names;
-@@ -276,6 +281,14 @@
+@@ -270,6 +275,14 @@
fl = fl->next;
kfree(tmp_fl);
}
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
-@@ -1537,7 +1537,7 @@
+@@ -1539,7 +1539,7 @@
.hw_start = rtl_hw_start_8169,
.region = 1,
.align = 0,
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = 0
-@@ -1546,7 +1546,7 @@
+@@ -1548,7 +1548,7 @@
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
-@@ -1555,7 +1555,7 @@
+@@ -1557,7 +1557,7 @@
.hw_start = rtl_hw_start_8101,
.region = 2,
.align = 8,
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.msi = RTL_FEATURE_MSI
-@@ -2903,10 +2903,12 @@
+@@ -2905,10 +2905,12 @@
break;
}
static int debug;
static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
static DEFINE_MUTEX(table_lock);
-@@ -815,7 +816,7 @@
+@@ -814,7 +815,7 @@
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
-@@ -1229,3 +1230,5 @@
+@@ -1228,3 +1229,5 @@
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
+
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
-@@ -385,12 +385,12 @@
+@@ -411,12 +411,12 @@
int ret;
if (!cpu_has_xcrypt) {
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
-@@ -254,12 +254,12 @@
+@@ -263,12 +263,12 @@
int rc = -ENODEV;
if (!cpu_has_phe) {
BOARD:=ifxmips
BOARDNAME:=Infineon Mips
FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES:=uboot-ifxmips
BOARDNAME:=Intel IOP32x
FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
SUBTARGETS=generic harddisk
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
-@@ -13,6 +13,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
+@@ -15,6 +15,8 @@
+
+ #define BOARD_CONFIG_PART "boardconfig"
+#include <asm/mach-types.h>
+
struct fis_image_desc {
unsigned char name[16]; // Null terminated name
uint32_t flash_base; // Address within FLASH of image
-@@ -30,7 +32,8 @@
+@@ -32,7 +34,8 @@
struct fis_list *next;
};
module_param(directory, int, 0);
static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -58,6 +61,8 @@
+@@ -61,6 +64,8 @@
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
static char nullstring[] = "unallocated";
#endif
--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -99,6 +99,36 @@
+@@ -115,6 +115,36 @@
&wg302v1_eth[0],
};
static void __init wg302v1_init(void)
{
ixp4xx_sys_init();
-@@ -117,6 +147,7 @@
+@@ -133,6 +163,7 @@
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ platform_device_register(&cambria_gpio);
platform_device_register(&cambria_optional_uart);
- cambria_npec_data.phy = 2;
+ platform_device_register(&cambria_npec_device);
BOARDNAME:=Magicbox
FEATURES:=squashfs pci
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
LINUX_KARCH:=ppc
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Marvell Orion
FEATURES:=squashfs
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=AMCC/IBM PPC40x
FEATURES:=squashfs
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
LINUX_KARCH:=powerpc
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=AMCC/IBM PPC44x
FEATURES:=squashfs
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
LINUX_KARCH:=powerpc
include $(INCLUDE_DIR)/target.mk
BOARD:=ps3
BOARDNAME:=Sony PS3 Game Console
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
KERNEL_CC:=
FEATURES:=ext2
LINUX_CONFIG:=$(CURDIR)/config/$(ARCH)
-LINUX_VERSION:=2.6.26.2
+LINUX_VERSION:=2.6.26.3
include $(INCLUDE_DIR)/target.mk
-Index: linux-2.6.26/arch/um/Makefile-i386
-===================================================================
---- linux-2.6.26.orig/arch/um/Makefile-i386 2008-07-28 13:43:40.412036547 +0200
-+++ linux-2.6.26/arch/um/Makefile-i386 2008-07-28 13:44:00.234033125 +0200
+--- a/arch/um/Makefile-i386
++++ b/arch/um/Makefile-i386
@@ -35,7 +35,7 @@
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots. Also, gcc
FEATURES:=squashfs jffs2 ext2 vdi
SUBTARGETS=generic
-LINUX_VERSION:=2.6.25.15
+LINUX_VERSION:=2.6.25.16
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci